Photocatalytic C-C Coupling from Carbon Dioxide Reduction on Copper Oxide with Mixed-Valence Copper(I)/Copper(II)

Ultrathin Palladium-loaded Cuprous oxide stabilises Copper(I) to facilitate electrochemical carbon dioxide reduction reaction

Cuprous oxide (Cu2O) exhibit significant potential for catalytic activity in the electrochemical carbon dioxide reduction reaction (CO2RR). However, the rapid reduction of Copper(I) (Cu+) to metallic Copper (Cu) leads to catalyst deactivation, significantly impacting product selectivity and stability. This study aims to stabilize the Cu+ valence state at a metal-Cu2O heterogeneous interface through interfacial engineering, ultimately enhancing the electrochemical CO2 reduction performance of Cu2O. Utilizing comprehensive in situ Raman spectroscopy, we observed that the addition of Palladium (Pd) effectively inhibited the reduction of Cu2O. Additionally, combined in situ attenuated total reflection Fourier-transform infrared spectroscopy and theoretical calculations revealed that Pd loading enhances *CO intermediate concentration and adsorption energy, and reduces the energy barrier for *CHO formation. The improved stability of the Cu+ valence state led to the coexistence of two CO adsorption modes including COatop and CObridge, promoting further CO hydrogenation and C-C coupling. Consequently, the Pd-loaded Cu2O catalyst demonstrated remarkable electrochemical CO2RR performance, achieving a methanol (CH3OH) Faradaic efficiency of 78 %.

Optimized Carbon Coupling for Enhanced Ethylene Production via a Unique Single-Atom-Substrate Synergy Mechanism within Photocatalytic Processes

The utilization of solar-driven technologies for the direct conversion of methanol (CH3OH) into two or multi-carbon compounds through controlled carbon-carbon (C-C) coupling is an appealing yet challenging objective. In this study, we successfully demonstrate the photocatalytic CH3OH coupling to ethylene (C2H4), a valuable chemical raw material, by employing a carbon nitride-based catalyst. Specifically, we modify the layered polymer carbon nitride (PCN) photocatalyst through the incorporation of Au single atoms (Au1/PCN) using a chemical-scissors method. The synergistic effect between the PCN substrate and the Au single atoms reduces the potential barrier associated with C-C coupling, thereby enhancing the efficiency of CH3OH reforming to C2H4. This investigation not only reveals a novel pathway for C2H4 production via CH3OH reforming but also provides fresh insights into the possibilities of C-C coupling.

Regulating coordination environment in metal-organic Framework@Cuprous oxide Core-Shell catalyst for Promoting electrocatalytic oxygen evolution reaction

As a kind of promising oxygen evolution reaction (OER) catalysts, metal-organic frameworks (MOF) are often constrained by their inherent poor electroconductivity and structural instability. In this study, we developed a mono-dispersed zeolitic imidazolate framework-67@cuprous oxide (ZIF-67@Cu2O) core-shell catalyst via in-situ growth method for highly efficient alkaline OER. The ZIF-67@Cu2O shows an excellent OER activity with a low overpotential of 254 mV at 10 mA cm-2 and Tafel slope of 87.9 mV·dec-1 in 1.0 M KOH. Furthermore, the ZIF-67@Cu2O also shows a high turnover frequency (TOF) of 0.166 s-1 at 1.60  V vs. RHE and long-term stability for 160 h at a high current density of 100 mA cm-2. The unique core-shell structure with the Cu2O core linked with ZIF-67 shell through interfacial di-oxygen bridge improves the structural stability, enhances the charge transfer, and provides more active sites. Moreover, the interfacial coordination structure was regulated from Co-N4 to Co-N2O2 which elevates the valence of Co sites and optimizes the adsorption free energy of oxygen-containing intermediates, thus improving the electrocatalytic OER performance. This work could propose the way for designing novel MOF-based nanomaterials and developing desirable and robust heterogeneous OER catalysts.

Facts and Fictions About Photocatalytic CO2 Reduction to C2+ Products

In response to carbon neutrality, photocatalytic reduction of CO2 has been the subject of growing interest for researchers over the past few years. Multi-carbon products (C2+) with higher energy density and larger market value produced from photocatalytic reduction of CO2 are still very limited owing to the low photocatalytic productivity and poor selectivity of products. This review focuses on the recent progress on photocatalytic reduction of CO2 towards C2+ products from the perspective of performance evaluation and mechanistic understanding. We first provide a systematic description of the entire fundamental procedures of photocatalytic reduction of CO2. An in-depth strategy analysis for improving the selectivity of photocatalytic reduction of CO2 to C2+ products is then addressed. Then the focus was on summarizing the ways to improve C2+ selectivity. The intrinsic mechanisms of photocatalytic reduction of CO2 to C2+ products are summarized in the final. Combining the foundation of photocatalysis with promising catalyst strategies, this review will offer valuable guidance for the development of efficient photocatalytic systems for the synthesis of C2+ products.

Direct Partial Transformation of 2D Antimony Oxybromide to Halide Perovskite Heterostructure for Efficient CO2 Photoreduction

The photocatalytic activity of lead-free perovskite heterostructures currently suffers from low efficiency due to the lack of active sites and the inadequate photogenerated carrier separation, the latter of which is hindered by slow charge transfer at the heterostructure interfaces. Herein, a facile strategy is reported for the construction of lead-free halide-perovskite-based heterostructure with swift interfacial charge transfer, achieved through direct partial conversion of 2D antimony oxybromide Sb4O5Br2 to generate Cs3Sb2Br9/Sb4O5Br2 heterostructure. Compared to the traditional electrostatic self-assembly method, this approach endows the Cs3Sb2Br9/Sb4O5Br2 heterostructure with a tightly interconnected interface through in situ partial conversion, significantly accelerating interfacial charge transfer and thereby enhancing the separation efficiency of photogenerated carriers. The cobalt-doped Cs3Sb2Br9/Sb4O5Br2 heterostructure demonstrates a record-high electron consumption rate of 840 µmol g-1 h-1 for photocatalytic CO2 reduction to CO coupled with H2O oxidation to O2, which is over 74- and 16-fold higher than that of individual Sb4O5Br2 and Cs3Sb2Br9, respectively. This work provides an effective strategy for promoting charge separation in photocatalysts to improve the performance of artificial photosynthesis.

Additives-Modified Electrodeposition for Synthesis of Hydrophobic Cu/Cu2O with Ag Single Atoms to Drive CO2 Electroreduction

Copper-based electrocatalysts are recognized as crucial catalysts for CO2 electroreduction into multi-carbon products. However, achieving copper-based electrocatalysts with adjustable valences via one-step facile synthesis remains a challenge. In this study, Cu/Cu2O heterostructure is constructed by adjusting the anion species of the Cu ions-containing electrolyte during electrodeposition synthesis. Then, Cu/Cu2O with tuned nanoarchitectures ranging from dendrites to polyhedrons is achieved by introducing transition metal ions as additives, leading to an adjustable interfacial microenvironment for CO2/H2O adsorption on the Cu/Cu2O electrodes. Additionally, the polyhedral Cu/Cu2O catalysts are used as templates for depositing Ag single atoms (AgSA), which are known as synergistic active sites for promoting *CO to *COH toward C2+ products. The prepared AgSA-Cu/Cu2O catalyst is evaluated in a flow cell and exhibited a FEC2+ of 90.2% and a partial current density (jc2+) of 426.6 mA cm-2 for CO2 electroreduction. As revealed by in situ Raman spectra and density functional theory calculations, the introduction of Ag single atoms slows down the reduction of Cu+ during CO2 electroreduction, especially at a high current density. This work provides a promising paradigm for diverse control of the compositions and hydrophobicity of Cu-based catalysts for selective CO2 electroreduction to C2+ products.

Switching CO-to-Acetate Electroreduction on Cu Atomic Ensembles

The electrocatalytic reaction pathway is highly dependent on the intrinsic structure of the catalyst. CO2/CO electroreduction has recently emerged as a potential approach for obtaining C2+ products, but it is challenging to achieve high selectivity for a single C2+ product. Herein, we develop a Cu atomic ensemble that satisfies the appropriate site distance and coordination environment required for electrocatalytic CO-to-acetate conversion, which shows outstanding overall performance with an acetate Faradaic efficiency of 70.2% with a partial current density of 225 mA cm-2 and a formation rate of 2.1 mmol h-1 cm-2. Moreover, a single-pass CO conversion rate of 91% and remarkable stability can be also obtained. Detailed experimental and theoretical investigations confirm the significant advantages of the Cu atomic ensembles in optimizing C-C coupling, stabilizing key ketene intermediate (*CCO), and inhibiting the *HOCCOH intermediate, which can switch the CO reduction pathway from the ethanol/ethylene on the conventional metallic Cu site to the acetate on the Cu atomic ensembles.

Nitrogen-Bridged S-N-Cu Sites for CO2 Photoreduction to Ethanol with 99.5 % Selectivity in Pure Water

Solar-driven CO2 reduction to ethanol is extremely challenging due to the limited efficiency of charge separation, sluggish kinetics of C-C coupling, and unfavorable formation of oxygenate intermediates. Here, we elaborately design a red polymer carbon nitride (RPCN) consisting of S-N and Cu-N4 dual active sites (Cu/S-RPCN) to address this challenge, which achieves an impressive ethanol evolution rate of 50.4 μmol g-1 h-1 with 99.5 % selectivity for CO2 photoreduction in pure water. Cu and S atoms within the Cu-N-S configuration can serve as trapping centers for electrons and holes, respectively, providing spatial separation for photogenerated charge carriers. The incorporation of S atoms optimizes the adsorption of *CO on Cu atoms and reduces the energy barrier for the formation of *CO-COH intermediate. The adsorption strength of *OCHCH2OH intermediate on the Cu atoms via the O-Cu-C configuration can affect the selectivity of the C2 products as the cleavage of the Cu-O/Cu-C bonds determines the ethanol/ethylene pathway. The S-N-Cu structure weakens the Cu-O bond, thereby promoting the production of ethanol. This work provides a novel approach to fine-tune the surrounding microenvironment of metal atoms on carbon nitride for highly effective photocatalytic conversion of CO2 to ethanol.

Highly selective photocatalytic CO2 reduction into C2H4 enabled by metal-organic framework-derived catalysts with high Cu+ content

The highly selective conversion of CO2 into valuable C2H4 is a highly important but particularly challenging reaction. Herein, the metal-organic frameworks MOF-74(Cu) with infinite Cu(II)-O chains and Cu-BTC (BTC=benzene-1,3,5-tricarboxylate) with paddle-wheel binuclear Cu(II) clusters are used as precursors. These MOFs are reduced by NaBH4 to obtain Cu0/Cuδ+-based photocatalysts denoted as R-MOF-74(Cu) and R-Cu-BTC, respectively. Significantly, R-MOF-74(Cu) achieves a high selectivity of 90.2 % for C2H4 with a yield rate of 6.5 μmol g-1 within 5 h due to its high Cu+ content. To the best of our knowledge, this C2H4 product selectivity is a record high among all the photocatalysts reported so far for photocatalytic CO2 reduction. In contrast, R-Cu-BTC only forms CO as a product with a cumulative yield of 0.7 μmol g-1 within 5 h. Photoelectrochemical characterization and electron paramagnetic resonance results show that R-MOF-74(Cu) has low interfacial transfer resistance, high photogenerated electron separation efficiency, and excellent CO2 activation and water oxidation performance. In addition, in situ Fourier transform infrared spectroscopy is used to determine the possible reaction pathway from CO2 to C2H4 over R-MOF-74(Cu). This work demonstrates the great potential of MOF-derived photocatalysts for the conversion of CO2 into C2H4 and provides guidance for future photocatalyst development.

Cu2O@Cu@NiAl-LDH with Cu0/Cu+ Valence Synergy and Core-Shell Structure for Highly Selective Generation of C2H6

Photocatalytic CO2 reduction to produce C2 products remains a challenge. Herein, Cu2O@Cu@NiAl-LDH composites with three-dimensional ordered core-shell structures were successfully prepared, and the effects of Cu2O with different exposed surfaces on CO2 photoreduction were investigated. The synergistic effect of zero-valent Cu and Cu+ as intermediate electron mediators retains more photogenerated electrons and the Z-scheme heterojunction formed between Cu2O and NiAl-LDH leads to the enhancement of C2 selectivity. The best sample, Cu2O@Cu@NiAl-LDH-2, achieved a C2H6 yield of 22.17 μmol g-1 h-1 with 63.89 % electron selectivity. The evolution pathways and photocatalytic mechanisms of CO2 were investigated by in-situ DRIFTS and theoretical calculations. This study provides references and suggestions for the further development of experimental and theoretical calculations of Cu2O-based photocatalysts for the reduction of CO2 to C2 products.

Investigation of the Photocatalytic Activity of Copper-Modified Commercial Titania (P25) in the Process of Carbon Dioxide Photoreduction

The photocatalytic reduction of CO2 to useful products is an area of active research because it shows a potential to be an efficient tool for mitigating climate change. This work investigated the modification of titania with copper(II) nitrate and its impact on improving the CO2 reduction efficiency in a gas-phase batch photoreactor under UV-Vis irradiation. The investigated photocatalysts were prepared by treating P25-copper(II) nitrate suspensions (with various Cu2+ concentrations), alkalized with ammonia water, in a microwave-assisted solvothermal reactor. The titania-based photocatalysts were characterized by SEM, EDS, ICP-OES, XRD and UV-Vis/DR methods. Textural properties were measured by the low-temperature nitrogen adsorption/desorption studies at 77 K. P25 photocatalysts modified with copper(II) nitrate used in the process of carbon dioxide reduction allowed for a higher efficiency both for the photocatalytic reduction of CO2 to CH4 and for the photocatalytic water decomposition to hydrogen as compared to a reference. Similarly, modified samples showed significantly higher selectivity towards methane in the CO2 conversion process than the unmodified sample (a change from 30% for a reference sample to 82% for the P25-R-Cu-0.1 sample after the 6 h process). It was found that smaller loadings of Cu are more beneficial for increasing the photocatalytic activity of a sample.

Principle Design of C-C Coupling Pathway Towards Highly Selective C2 Products Using Photocatalytic CO2 Reduction:A Review

Photocatalytic conversion of environmental CO2 into valuable fuels is expected to alleviate fossil fuel and pollution problems. However, intricate product-reaction pathways complicate the regulation of product selectivity. Most studies in this field have focused on increasing productivity rather than on controlling product formation. To date, the major products of photocatalytic CO2 reduction reactions (CO2RRs) are C1 compounds, as opposed to the higher-value C2 compounds, because of the low C2 selectivity of this process. The design of C-C coupled pathways is paramount to facilitate selective access to C2 products in the photocatalytic CO2RR. In this review, we discuss the mechanisms and pathways of CO2RR product generation based on recent research results and summarise the work on CO2RR to C2 products. This review aims to modulate the product-generation pathway to improve the yield and selectivity of C2 products by facilitating C-C coupling reactions. Finally, some of the current challenges in the field of the CO2RR to C2 are outlined, including possible mechanistic interpretations, cost of catalyst use, reactor design, and potential solutions.

Rare Earth Er-Nd Dual Single-Atomic Catalysts for Efficient Visible-light Induced CO2 Reduction to CnH2n+1OH (n=1, 2)

Efficient synthesis of CnH2n+1OH (n=1, 2) via photochemical CO2 reduction holds promise for achieving carbon neutrality but remains challenging. Here, we present rare earth dual single atoms (SAs) catalysts containing ErN6 and NdN6 moieties, fabricated via an atom-confinement and coordination method. The dual Er-Nd SAs catalysts exhibit unprecedented generation rates of 1761.4 μmol g-1 h-1 and 987.7 μmol g-1 h-1 for CH3CH2OH and CH3OH, respectively. Through a combination of theoretical calculation, XAFS analysis, aberration-corrected HAADF-STEM, and in-situ FTIR spectroscopy, we demonstrate that the Er SAs facilitate charge transfer, serving as active centers for C-C bond formation, while Nd SAs provide the necessary *CO for C-C coupling in C2H5OH synthesis under visible light. Furthermore, the experiment and DFT calculation elucidate that the variety of electronic states induced by 4 f orbitals of the Er SAs and the p-f orbital hybridization of Er-N moieties enable the formation of charge-transfer channel. Therefore, this study sheds light on the pivotal role of *CO adsorption in achieving efficient conversion from CO2 to CnH2n+1OH (n=1, 2) via a novel rare earth-based dual SAs photocatalysis approach.

Self-Reconstruction Induced Electronic Metal-Support Interaction for Modulated Cu+ Sites on TiO2 Nanofibers in Electrocatalytic Nitrate Conversion

The Cu+ active sites have gained great attention in electrochemical nitrate reduction, offering a highly promising method for nitrate removal from water bodies. However, challenges arise from the instability of the Cu+ state and microscopic structure over prolonged operation, limiting the selectivity and durability of Cu+-based electrodes. Herein, a self-reconstructed Cu2O/TiO2 nanofibers (Cu2O/TiO2 NFs) catalyst, demonstrating exceptional stability over 50 cycles (12 h per cycle), a high NO3 --N removal rate of 90.2%, and N2 selectivity of 98.7% is reported. The in situ electrochemical reduction contributes to the self-reconstruction of Cu2O/TiO2 nanofibers with stabilized Cu+ sites via the electronic metal-support interaction between TiO2 substrates, as evidenced by in situ characterizations and theoretical simulations. Additionally, density functional theory (DFT) calculations also indicate that the well-retained Cu+ sites enhance catalytic capability by inhibiting the hydrogen evolution reaction and optimizing the binding energy of *NO on the Cu2O/TiO2 NFs heterostructure surface. This work proposes an effective strategy for preserving low-valence-state Cu-based catalysts with high intrinsic activity for nitrate reduction reaction (NO3RR), thereby advancing the prospects for sustainable nitrate remediation technologies.

Bioinspired catalytic pocket promotes CO2-to-ethanol photoconversion on colloidal quantum wells

Sluggish surface reaction is a critical factor that strongly governs the efficiency of photocatalytic solar fuel production, particularly in CO2-to-ethanol photoconversion. Here, inspired by the principles underlying enzyme catalytic proficiency and specificity, we report a biomimetic photocatalyst that affords superior CO2-to-ethanol photoreduction efficiency (5.5 millimoles gram-1 hour-1 in average with 98.2% selectivity) distinctly surpassing the state of the art. The key is to create a class of catalytic pocket, which contains spatially organized NH2…Cu-Se(-Zn) multiple functionalities at close range, over ZnSe colloidal quantum wells. Such structure offers a platform to mimic the concerted cooperation between the active site and surrounding secondary/outer coordination spheres in enzyme catalysis. This is manifested by the chemical adsorption and activation of CO2 via a bent geometry, favorable stabilization toward a variety of important intermediates, promotion of multielectron/proton transfer processes, etc. These results highlight the potential of incorporating enzyme-like features into the design of photocatalysts to overcome the challenges in CO2 reduction.

Entropy-Derived Synthesis of the CuPd Sub-1nm Alloy for CO2-to-acetate Electroreduction

Bimetallic alloys exhibit remarkable properties in catalysis and energy storage, while their precise synthesis at the subnanoscale remains a formidable challenge due to their immiscible nature in thermodynamics. In this study, we engineer an atomically dispersed CuPd alloy with an average size of 1.5 nm loaded on CuO and phosphomolybdic acid (PMA) coassembly subnanosheets (CuO-PMA SNSs). Driven by the high vibrational entropy, Cu atoms could escape from CuO supports and bond with adjacent Pd single atoms, leading to the in situ formation of CuPd alloys. Furthermore, this strategy can also be utilized for synthesizing the ZnPt alloy with an average size of 1 nm, thereby providing a general pathway for the design of immiscible subnanoalloys. The fully exposed Cu-Pd pairs in CuPd subnanoalloys significantly enhance the adsorption and coverage of surface *CO during the electrochemical reduction of CO2, thereby leading to enhanced stability of ethenone intermediates and facilitating the production of C2 compounds. The resulting CuPd subnanoalloy exhibits a remarkable Faradaic efficiency of 46.5 ± 2.1% for CO2-to-acetate electroreduction and achieves a high acetate productivity of 99 ± 2.8 μmol cm-2 at -0.7 V versus RHE.

Unlocking Copper-Free Interfacial Asymmetric C-C Coupling for Ethylene Photosynthesis from CO2 and H2O

Solar-driven carbon dioxide (CO2) reduction into C2+ products such as ethylene represents an enticing route toward achieving carbon neutrality. However, due to sluggish electron transfer and intricate C-C coupling, it remains challenging to achieve highly efficient and selective ethylene production from CO2 and H2O beyond capitalizing on Cu-based catalysts. Herein, we report a judicious design to attain asymmetric C-C coupling through interfacial defect-rendered tandem catalytic centers within a sulfur-vacancy-rich MoSx/Fe2O3 photocatalyst sheet, enabling a robust CO2 photoreduction to ethylene without the need for copper, noble metals, and sacrificial agents. Specifically, interfacial S vacancies induce adjacent under-coordinated S atoms to form Fe-S bonds as a rapid electron-transfer pathway for yielding a Z-scheme band alignment. Moreover, these S vacancies further modulate the strong coupling interaction to generate a nitrogenase-analogous Mo-Fe heteronuclear unit and induce the upward shift of the d-band center. This bioinspired interface structure effectively suppresses electrostatic repulsion between neighboring *CO and *COH intermediates via d-p hybridization, ultimately facilitating an asymmetric C-C coupling to achieve a remarkable solar-to-chemical efficiency of 0.565% with a superior selectivity of 84.9% for ethylene production. Further strengthened by MoSx/WO3, our design unveils a promising platform for optimizing interfacial electron transfer and offers a new option for C2+ synthesis from CO2 and H2O using copper-free and noble metal-free catalysts.

Synthesis and catalytic application of nanostructured metal oxides and phosphates

The design and development of new high-performance catalysts is one of the most important and challenging issues to achieve sustainable chemical and energy production. This Feature Article describes the synthesis of nanostructured metal oxides and phosphates mainly based on earth-abundant metals and their thermocatalytic application to selective oxidation and acid-base reactions. A simple and versatile methodology for the control of nanostructures based on crystalline complex oxides and phosphates with diverse structures and compositions is proposed as another approach to catalyst design. Herein, two unique and verstile methods for the synthesis of metal oxide and phosphate nanostructures are introduced; an amino acid-aided method for metal oxides and phosphates and a precursor crystallization method for porous manganese oxides. Nanomaterials based on perovskite oxides, manganese oxides, and metal phosphates can function as effective heterogeneous catalysts for selective aerobic oxidation, biomass conversion, direct methane conversion, one-pot synthesis, acid-base reactions, and water electrolysis. Furthermore, the structure-activity relationship is clarified based on experimental and computational approaches, and the influence of oxygen vacancy formation, concerted activation of molecules, and the redox/acid-base properties of the outermost surface are discussed. The proposed methodology for nanostructure control would be useful not only for the design and understanding of the complexity of metal oxide catalysts, but also for the development of innovative catalysts.

Charge Transport Approaches in Photocatalytic Supramolecular Systems Composing of Semiconductor and Molecular Metal Complex for CO2 Reduction

The design of photocatalytic supramolecular systems composing of semiconductors and molecular metal complexes for CO2 reduction has attracted increasing attention. The supramolecular system combines the structural merits of semiconductors and metal complexes, where the semiconductor harvests light and undertakes the oxidative site, while the metal complex provides activity for CO2 reduction. The intermolecular charge transfer plays crucial role in ensuring photocatalytic performance. Here, we review the progress of photocatalytic supramolecular systems in reduction of CO2 and highlight the interfacial charge transfer pathways, as well as their state-of-the-art characterization methods. The remaining challenges and prospects for further design of supramolecular photocatalysts are also presented.

Clustering-Resistant Cu Single Atoms on Porous Au Nanoparticles Supported by TiO2 for Sustainable Photoconversion of CO2 into CH4

Photocatalysts based on single atoms (SAs) modification can lead to unprecedented reactivity with recent advances. However, the deactivation of SAs-modified photocatalysts remains a critical challenge in the field of photocatalytic CO2 reduction. In this study, we unveil the detrimental effect of CO intermediates on Cu single atoms (Cu-SAs) during photocatalytic CO2 reduction, leading to clustering and deactivation on TiO2. To address this, we developed a novel Cu-SAs anchored on Au porous nanoparticles (CuAu-SAPNPs-TiO2) via a vectored etching approach. This system not only enhances CH4 production with a rate of 748.8 μmol ⋅ g-1 ⋅ h-1 and 93.1 % selectivity but also mitigates Cu-SAs clustering, maintaining stability over 7 days. This sustained high performance, despite the exceptionally high efficiency and selectivity in CH4 production, highlights the CuAu-SAPNPs-TiO2 overarching superior photocatalytic properties. Consequently, this work underscores the potential of tailored SAs-based systems for efficient and durable CO2 reduction by reshaping surface adsorption dynamics and optimizing the thermodynamic behavior of the SAs.

Ru Single Atom Dispersed Cu Nanoparticle with Dual Sites Enables Outstanding Photocatalytic CO2 Reduction

Cu-based catalysts are promising candidates for CO2 reduction owing to the favorable energetics of Cu sites for CO2 adsorption and transformation. However, CO2 reduction involving insurmountable activation barriers and various byproducts remains a significant challenge to achieve high activity and selectivity. Herein, a photocatalyst constructed with single-Ru-site-on-Cu-nanoparticle on Bi4Ti3O12 exhibits exceptional activity and selectivity for CO2 conversion to CO. The experimental and theoretical results consistently reveal that the Ru-Cu dual sites allow the rapid transfer of photogenerated carriers for closely interacting with CO2 molecules. Importantly, the Ru-Cu dual sites exhibit extremely strong CO2 adsorption ability, and the Gibbs free energy of the rate-determining step (*CO2 to *COOH) has been significantly reduced, synergistically enhancing the entire CO2 conversion process. The optimal BTOCu2Ru0.5 photocatalyst manifests a high performance for selective reduction of CO2 to CO, yielding 10.84 μmol over 15 mg of photocatalyst in 4 h (180.67 μmol·g-1·h-1) under a 300 W Xe lamp without any photosensitizer and sacrificial reagent, outperforming all bismuth-based materials and being one of the best photocatalysts ever reported under similar reaction conditions. This work presents a strategy for the rational design of multiple metal sites toward efficient photocatalytic reduction of CO2.

Leveraging experimental and computational tools for advancing carbon capture adsorbents research

CO2 emissions have been steadily increasing and have been a major contributor for climate change compelling nations to take decisive action fast. The average global temperature could reach 1.5 °C by 2035 which could cause a significant impact on the environment, if the emissions are left unchecked. Several strategies have been explored of which carbon capture is considered the most suitable for faster deployment. Among different carbon capture solutions, adsorption is considered both practical and sustainable for scale-up. But the development of adsorbents that can exhibit satisfactory performance is typically done through the experimental approach. This hit and trial method is costly and time consuming and often success is not guaranteed. Machine learning (ML) and other computational tools offer an alternate to this approach and is accessible to everyone. Often, the research towards materials focuses on maximizing its performance under simulated conditions. The aim of this study is to present a holistic view on progress in material research for carbon capture and the various tools available in this regard. Thus, in this review, we first present a context on the workflow for carbon capture material development before providing various machine learning and computational tools available to support researchers at each stage of the process. The most popular application of ML models is for predicting material performance and recommends that ML approaches can be utilized wherever possible so that experimentations can be focused on the later stages of the research and development.

Boosting Photocatalytic CO2 Methanation through Interface Fusion over CdS Quantum Dot Aerogels

In the field of photocatalytic CO2 reduction, quantum dot (QD) assemblies have emerged as promising candidate photocatalysts due to their superior light absorption and better substrate adsorption. However, the poor contacts within QD assemblies lead to low interfacial charge transfer efficiency, making QD assemblies suffer from unsatisfactory photocatalytic performance. Herein, a novel approach is presented involving the construction of strongly interfacial fused CdS QD assemblies (CdS QD gel) for CO2 reduction. The novel CdS QD gel demonstrates outstanding photocatalytic performance for CO2 methanation, achieving a CH4 generation rate of ≈296 µmol g-1 h-1, with a selectivity surpassing 76% and an apparent quantum yield (AQY) of 1.4%. Further investigations reveal that the robust interfacial fusion in these CdS QDs not only boosts their ability to absorb visible light but also significantly promotes charge separation. The present work paves the way for utilizing QD gel photocatalysts in realizing efficient CO2 reduction and highlights the critical role of interfacial engineering in photocatalysts.

Asymmetric Atomic Dual-Sites for Photocatalytic CO2 Reduction

Atomically dispersed active sites in a photocatalyst offer unique advantages such as locally tuned electronic structures, quantum size effects, and maximum utilization of atomic species. Among these, asymmetric atomic dual-sites are of particular interest because their asymmetric charge distribution generates a local built-in electric potential to enhance charge separation and transfer. Moreover, the dual sites provide flexibility for tuning complex multielectron and multireaction pathways, such as CO2 reduction reactions. The coordination of dual sites opens new possibilities for engineering the structure-activity-selectivity relationship. This comprehensive overview discusses efficient and sustainable photocatalysis processes in photocatalytic CO2 reduction, focusing on strategic active-site design and future challenges. It serves as a timely reference for the design and development of photocatalytic conversion processes, specifically exploring the utilization of asymmetric atomic dual-sites for complex photocatalytic conversion pathways, here exemplified by the conversion of CO2 into valuable chemicals.

A synergetic cocatalyst for conversion of carbon dioxide, sunlight, and water into methanol

The conversion of CO2 into liquid fuels, using only sunlight and water, offers a promising path to carbon neutrality. An outstanding challenge is to achieve high efficiency and product selectivity. Here, we introduce a wireless photocatalytic architecture for conversion of CO2 and water into methanol and oxygen. The catalytic material consists of semiconducting nanowires decorated with core-shell nanoparticles, with a copper-rhodium core and a chromium oxide shell. The Rh/CrOOH interface provides a unidirectional channel for proton reduction, enabling hydrogen spillover at the core-shell interface. The vectorial transfer of protons, electrons, and hydrogen atoms allows for switching the mechanism of CO2 reduction from a proton-coupled electron transfer pathway in aqueous solution to hydrogenation of CO2 with a solar-to-methanol efficiency of 0.22%. The reported findings demonstrate a highly efficient, stable, and scalable wireless system for synthesis of methanol from CO2 that could provide a viable path toward carbon neutrality and environmental sustainability.

Shaping and Doping Metal-Organic Framework-Derived TiO2 to Steer the Selectivity of Photocatalytic CO2 Reduction toward CH4

Steering selectivity in photocatalytic conversion of CO2, especially toward deep reduction products, is vital to energy and environmental goals yet remains a great challenge. In this work, we demonstrate a facet-dependent photocatalytic selective reduction of CO2 to CH4 in Cu-doped TiO2 catalysts exposed with different facets synthesized by a topological transformation from MIL-125 (Ti) precursors. The optimized round cake-like Cu/TiO2 photocatalyst mainly exposed with the (001) facet exhibited a high photocatalytic CO2 reduction performance with a CH4 yield of 40.36 μmol g-1 h-1 with a selectivity of 94.1%, which are significantly higher than those of TiO2 (001) (4.70 μmol g-1 h-1 and 52.6%, respectively), Cu/TiO2 (001 + 101) (18.95 μmol g-1 h-1 and 69.6%, respectively), and Cu/TiO2 (101) (14.73 μmol g-1 h-1 and 78.9%, respectively). The results of experimental and theoretical calculations demonstrate that the Cu doping dominating the promoted separation and migration efficiencies of photogenerated charges and the preferential adsorption on (001) facets synergistically contribute to the selective reduction of CO2 to CH4. This work highlights the significance of synergy between facet engineering and ion doping in the design of high-performance photocatalysts with respect to selective reduction of CO2 to multielectron products.

Bimetallic Single Atom/Nanoparticle Ensemble for Efficient Photochemical Cascade Synthesis of Ethylene from Methane

Light-driven photoredox catalysis presents a promising approach for the activation and conversion of methane (CH4) into high value-added chemicals under ambient conditions. However, the high C-H bond dissociation energy of CH4 and the absence of well-defined C-H activation sites on catalysts significantly limit the highly efficient conversion of CH4 toward multicarbon (C2+) hydrocarbons, particularly ethylene (C2H4). Herein, we demonstrate a bimetallic design of Ag nanoparticles (NPs) and Pd single atoms (SAs) on ZnO for the cascade conversion of CH4 into C2H4 with the highest production rate compared with previous works. Mechanistic studies reveal that the synergistic effect of Ag NPs and Pd SAs, upon effecting key bond-breaking and -forming events, lowers the overall energy barrier of the activation process of both CH4 and the resulting C2H6, constituting a truly synergistic catalytic system to facilitate the C2H4 generation. This work offers a novel perspective on the advancement of photocatalytic directional CH4 conversion toward high value-added C2+ hydrocarbons through the subtle design of bimetallic cascade catalyst strategy.

Recent advances of metal active sites in photocatalytic CO2 reduction

Photocatalytic CO2 reduction captures solar energy to convert CO2 into hydrocarbon fuels, thus shifting the dependence on rapidly depleting fossil fuels. Among the various proposed photocatalysts, systems containing metal active sites (MASs) possess obvious advantages, such as effective photogenerated carrier separation, suitable adsorption and activation of intermediates, and achievable C-C coupling to generate multi-carbon (C2+) products. The present review aims to summarize the typical photocatalytic materials with MAS, highlighting the critical role of different formulations of MAS in CO2 photoreduction, especially for C2+ product generation. State-of-the-art progress in the characterization and theoretical calculations for MAS-containing photocatalysts is also emphasized. Finally, the challenges and prospects of catalytic systems involving MAS for solar-driven CO2 conversion are outlined, providing inspiration for the future design of materials for efficient photocatalytic energy conversion.

Evidence on C-C Coupling to Acetate as Key Reaction Intermediate in Photocatalytic Reduction of CO2 over Pt/TiO2

Photocatalytic conversion of CO2 with H2O is an attractive application that has the potential to mitigate environmental and energy challenges through the conversion of CO2 to hydrocarbon products such as methane. However, the underlying reaction mechanisms remain poorly understood, limiting real progress in this field. In this work, a mechanistic investigation of the CO2 photocatalytic reduction on Pt/TiO2 is carried out using an operando FTIR approach, combined with chemometric data processing and isotope exchange of (12CO2 + H2O) toward (13CO2 + H2O). Multivariate curve resolution analysis applied to operando spectra across numerous cycles of photoactivation and the CO2 reaction facilitates the identification of principal chemical species involved in the reaction pathways. Moreover, specific probe-molecule-assisted reactions, including CO and CH3COOH, elucidate the capacity of selected molecules to undergo methane production under irradiation conditions. Finally, isotopic exchange reveals conclusive evidence regarding the nature of the identified species during CO2 conversion and points to the significant role of acetates resulting from the C-C coupling reaction as key intermediates in methane production from the CO2 photocatalytic reduction reaction.

Achieving Almost 100% Selectivity in Photocatalytic CO2 Reduction to Methane via In-Situ Atmosphere Regulation Strategy

Artificial photosynthesis, harnessing solar energy to convert CO2 into hydrocarbons, presents a promising solution for climate change and energy scarcity. However, photocatalytic CO2 reduction often terminates at the CO stage due to limited electron transfer capacity, hindering the formation of higher-energy hydrocarbons such as CH4. This study introduces, for the first time, an in-situ atmosphere regulation strategy, refined from molecular imprinting methodologies, using dynamically reacting molecules to precisely engineer photocatalytic surface sites for selective *CO adsorption and hydrogenation in CO2-to-CH4 conversion. Specifically, the single-atom Cu catalyst (Cu-SA-CO) is prepared by anchoring single-atom Cu onto defective TiO2 substrates (Cu-SA-CO) under a CO reduction atmosphere. Under illumination, the catalyst exhibited outstanding CH4 selectivity (almost 100%) and productivity (58.5 µmol g-1 h-1). Mechanistic investigations reveal that the coordination environment of the Cu single atoms is significantly affected by dynamically reacting molecules (CO and *CHxO) during synthesis, leading to a Ti-Cu-O structure. The structure, with the synergistic interaction between Cu single atoms and oxygen defects, significantly enhances *CO adsorption and hydrogenation, thereby promoting the formation of methane. This work pioneers the use of dynamically reactive molecules as imprinted templates to tune photocatalytic CO2 reduction selectivity, providing a novel avenue for designing efficient photocatalysts.

Facile Construction of a Double-Heterojunction Perovskite Quantum Dot System for Efficient Photocatalytic Cr6+ Reduction

Based on their excellent stability, high carrier mobility, and wide photoresponse range, composites formed by embedding perovskite quantum dots (PQDs) into metal-organic frameworks (PQDs@MOF) show great development potential in the field of photocatalysis, including the toxic hexavalent chromium (Cr6+) degradation, CO2 reduction, H2 production, etc. However, the rapid recombination of photogenerated carriers is still a major obstacle to the improvement of photocatalytic performance, and the internal mechanism of photocatalysis is still unclear. In this work, we construct a novel double heterojunction photocatalyst by encapsulating CsPbBr3 PQDs in Zr-based metal-organic frameworks (UiO-67) and loading additional hole-acceptor pentylenetetrazol (PTZ). Spontaneous photoinduced charge-transfer and separation between interfaces are confirmed by time-resolved photoluminescence and transient absorption spectroscopy. Furthermore, compared with pure UiO-67, the photoactivity of CsPbBr3 PQDs@UiO-67@PTZ increased 3-fold due to the long-lived charge-separated state. Our findings provide a new guideline for the design of PQDs@MOF-based photocatalysts with long-lived photogenerated carriers and outstanding photocatalytic activity.

Boosting Solar-Driven CO2 Conversion to Ethanol via Single-Atom Catalyst with Defected Low-Coordination Cu-N2 Motif

Cu-based catalysts have been shown to selectively catalyze CO2 photoreduction to C2+ solar fuels. However, they still suffer from poor activity and low selectivity. Herein, we report a high-performance carbon nitride supported Cu single-atom catalyst featuring defected low-coordination Cu-N2 motif (Cu-N2-V). Lead many recently reported photocatalysts and its Cu-N3 and Cu-N4 counterparts, Cu-N2-V exhibits superior photocatalytic activity for CO2 reduction to ethanol and delivers 69.8 μmol g-1 h-1 ethanol production rate, 97.8 % electron-based ethanol selectivity, and a yield of ~10 times higher than Cu-N3 and Cu-N4. Revealed by the extensive experimental investigation combined with DFT calculations, the superior photoactivity of Cu-N2-V stems from its defected Cu-N2 configuration, in which the Cu sites are electron enriched and enhance electron delocalization. Importantly, Cu in Cu-N2-V exist in both Cu+ and Cu2+ valence states, although predominantly as Cu+. The Cu+ sites support the CO2 activation, while the co-existence of Cu+/Cu2+ sites are highly conducive for strong *CO adsorption and subsequent *CO-*CO dimerization enabling C-C coupling. Furthermore, the hollow microstructure of the catalyst also promotes light adsorption and charge separation efficiency. Collectively, these make Cu-N2-V an effective and high-performance catalyst for the solar-driven CO2 conversion to ethanol. This study also elucidates the C-C coupling reaction path via *CO-*CO to *COCOH and rate-determining step, and reveals the valence state change of partial Cu species from Cu+ to Cu2+ in Cu-N2-V during CO2 photoreduction reaction.

Cascaded *CO-*COH Intermediates on a Nonmetallic Plasmonic Photocatalyst for CO2-to-C2H6 with 90.6 % Selectivity

Oxygen vacancies (OV) in nonmetallic plasmonic photocatalysts can decrease the energy barrier for CO2 reduction, boosting C1 intermediate production for potential C2 formation. However, their susceptibility to oxidation weakens C1 intermediate adsorption. Herein we proposed a "photoelectron injection" strategy to safeguard OV in W18O49 by creating a W18O49/ZIS (W/Z) plasmonic photocatalyst. Moreover, photoelectrons contribute to the local multi-electron environment of W18O49, enhancing the intrinsic excitation of its hot electrons with extended lifetimes, as confirmed by in situ XPS and femtosecond transient absorption analysis. Density functional theory calculations revealed that W/Z with OV enhances CO2 adsorption, activating *CO production, while reducing the energy barrier for *COH production (0.054 eV) and subsequent *CO-*COH coupling (0.574 eV). Successive hydrogenation revealed that the free energy for *CH2CH2 hydrogenation (0.108 eV) was lower than that for *CH2CH2 desorption for C2H4 production (0.277 eV), favouring C2H6 production. Consequently, W/Z achieves an efficient C2H6 activity of 653.6 μmol g-1 h-1 under visible light, with an exceptionally high selectivity of 90.6 %. This work offers a new strategy for the rational design of plasmonic photocatalysts with high selectivity for C2+ products.

Oxidizing Role of Cu Cocatalysts in Unassisted Photocatalytic CO2 Reduction Using p-GaN/Al2O3/Au/Cu Heterostructures

Photocatalytic CO2 reduction to CO under unassisted (unbiased) conditions was recently demonstrated using heterostructure catalysts that combine p-type GaN with plasmonic Au nanoparticles and Cu nanoparticles as cocatalysts (p-GaN/Al2O3/Au/Cu). Here, we investigate the mechanistic role of Cu in p-GaN/Al2O3/Au/Cu under unassisted photocatalytic operating conditions using Cu K-edge X-ray absorption spectroscopy and first-principles calculations. Upon exposure to gas-phase CO2 and H2O vapor reaction conditions, the composition of the Cu nanoparticles is identified as a mixture of CuI and CuII oxide, hydroxide, and carbonate compounds without metallic Cu. These composition changes, indicating oxidative conditions, are rationalized by bulk Pourbaix thermodynamics. Under photocatalytic operating conditions with visible light excitation of the plasmonic Au nanoparticles, further oxidation of CuI to CuII is observed, indicating light-driven hole transfer from Au-to-Cu. This observation is supported by the calculated band alignments of the oxidized Cu compositions with plasmonic Au particles, where light-driven hole transfer from Au-to-Cu is found to be thermodynamically favored. These findings demonstrate that under unassisted (unbiased) gas-phase reaction conditions, Cu is found in carbonate-rich oxidized compositions rather than metallic Cu. These species then act as the active cocatalyst and play an oxidative rather than a reductive role in catalysis when coupled with plasmonic Au particles for light absorption, possibly opening an additional channel for water oxidation in this system.

Harnessing Electro-Descriptors for Mechanistic and Machine Learning Analysis of Photocatalytic Organic Reactions

Photocatalysis has emerged as an effective tool for addressing the contemporary challenges in organic synthesis. However, the trial-and-error-based screening of feasible substrates and optimal reaction conditions remains time-consuming and potentially expensive in industrial practice. Here, we demonstrate an electrochemical-based data-acquisition approach that derives a simple set of redox-relevant electro-descriptors for effective mechanistic analysis and performance evaluation through machine learning (ML) in photocatalytic synthesis. These electro-descriptors correlate to the quantification of shifted charge transfer processes in response to the photoirradiation and enabled construction of reactivity diagram where high-yield reactive "hot zones" can reflect subtle changes of the reaction system. For the model reaction of photocatalytic deoxygenation reaction, the influence of varying carboxylic acids (substrate A, oxidation-intended) and alkenes (substrate B, reduction-intended) and varying reaction conditions on the reaction yield can be visualized, while mathematical analysis of the electro-descriptor patterns further revealed distinct mechanistic/kinetic impacts from different substrates and conditions. Additionally, in the application of ML algorithms, the experimentally derived electro-descriptors reflect an overall redox kinetic outcome contributed from vast reaction parameters, serving as a capable means to reduce the dimensionality in the case of complex multiparameter chemical space. As a result, utilization of electro-descriptors enabled efficient and robust quantitative evaluation of chemical reactivity, demonstrating promising potential of introducing operando-relevant experimental insights in the data-driven chemistry.

Regulating Spin Density using TEMPOL Molecules for Enhanced CO2-to-Ethylene Conversion by HKUST-1 Framework Derived Electrocatalysts

The selectivity of multicarbon products in the CO2 reduction reaction (CO2RR) depends on the spin alignment of neighboring active sites, which requires a spin catalyst that facilitates electron transfer with antiparallel spins for enhanced C-C coupling. Here, we design a radical-contained spin catalyst (TEMPOL@HKUST-1) to enhance CO2-to-ethylene conversion, in which spin-disordered (SDO) and spin-ordered (SO) phases co-exist to construct an asymmetric spin configuration of neighboring active sites. The replacement of axially coordinated H2O molecules with TEMPOL radicals introduces spin-spin interactions among the Cu(II) centers to form localized SO phases within the original H2O-mediated SDO phases. Therefore, TEMPOL@HKUST-1 derived catalyst exhibited an approximately two-fold enhancement in ethylene selectivity during the CO2RR at -1.8 V versus Ag/AgCl compared to pristine HKUST-1. In situ ATR-SEIRAS spectra indicate that the spin configuration at asymmetric SO/SDO sites significantly reduces the kinetic barrier for *CO intermediate dimerization toward the ethylene product. The performance of the spin catalyst is further improved by spin alignment under a magnetic field, resulting in a maximum ethylene selectivity of more than 50 %. The exploration of the spin-polarized kinetics of the CO2RR provides a promising path for the development of novel spin electrocatalysts with superior performance.

Site-Selective Zn-Metalation in Poly-Triphenyl Amine-based Porous Organic Polymer for Solid-Gas Phase CO2 Photoreduction

Harvesting solar energy to produce value-added chemicals from carbon dioxide (CO2) presents a promising route for addressing the complexities of sustainable energy systems and environmental issues. In this context, the development of metal-coordinated porous organic polymers (POPs) offers a vital avenue for improving the photocatalytic performance of organic motifs. The current study presents a metal-integrated photocatalytic system (namely, Zn@BP-POP) developed via a one-pot Friedel-Crafts (F.C.) acylation strategy, for solid-gas phase photochemical CO2 reduction to CO (CO2RR). The postsynthetic incorporation of metal (Zn) active sites on the host polymeric backbone of BP-POP significantly influences the catalytic activity. Notably, Zn@BP-POP demonstrates good photocatalytic performance in the absence of any cocatalyst and photosensitizer yielding CO while impeding the competitive hydrogen evolution reaction (HER) from water. The experimental findings collectively propose that the observed catalytic activity and selectivity arise from the synergistic interplay between the singular zinc catalytic centers and the light-harvesting capacity of the highly conjugated polymeric backbone. Further, X-ray absorption spectroscopy (XAS) analysis has significantly highlighted the prominent role played by the ZnN2O4 single sites in the polymeric framework for activating the gaseous CO2 molecules. Further, time-dependent density functional theory (DFT) analysis also reveals the thermodynamic feasibility of CO2RR over HER under optimized reaction conditions. This work cumulatively presents an effective strategy to demonstrate the importance of metal-active sites and effectively establish their structure-activity relationship during photocatalysis.

Asymmetric Cu(I)─W Dual-Atomic Sites Enable C─C Coupling for Selective Photocatalytic CO2 Reduction to C2H4

Solar-driven CO2 reduction into value-added C2+ chemical fuels, such as C2H4, is promising in meeting the carbon-neutral future, yet the performance is usually hindered by the high energy barrier of the C─C coupling process. Here, an efficient and stabilized Cu(I) single atoms-modified W18O49 nanowires (Cu1/W18O49) photocatalyst with asymmetric Cu─W dual sites is reported for selective photocatalytic CO2 reduction to C2H4. The interconversion between W(V) and W(VI) in W18O49 ensures the stability of Cu(I) during the photocatalytic process. Under light irradiation, the optimal Cu1/W18O49 (3.6-Cu1/W18O49) catalyst exhibits concurrent high activity and selectivity toward C2H4 production, reaching a corresponding yield rate of 4.9 µmol g-1 h-1 and selectivity as high as 72.8%, respectively. Combined in situ spectroscopies and computational calculations reveal that Cu(I) single atoms stabilize the *CO intermediate, and the asymmetric Cu─W dual sites effectively reduce the energy barrier for the C─C coupling of two neighboring CO intermediates, enabling the highly selective C2H4 generation from CO2 photoreduction. This work demonstrates leveraging stabilized atomically-dispersed Cu(I) in asymmetric dual-sites for selective CO2-to-C2H4 conversion and can provide new insight into photocatalytic CO2 reduction to other targeted C2+ products through rational construction of active sites for C─C coupling.

Br, O-Modified Cu(111) Interface Promotes CO2 Reduction to Multicarbon Products

Electrochemical reduction of CO2 to multicarbon (C2+) products with added value represents a promising strategy for achieving a carbon-neutral economy. Precise manipulation of the catalytic interface is imperative to control the catalytic selectivity, particularly toward C2+ products. In this study, a unique Cu/UIO-Br interface is designed, wherein the Cu(111) plane is co-modified simultaneously by Br and O from UIO-66-Br support. Such Cu/UIO-Br catalytic interface demonstrates a superior Faradaic efficiency of ≈53% for C2+ products (ethanol/ethylene) and the C2+ partial current density reached 24.3 mA cm-2 in an H-cell electrolyzer. The kinetic isotopic effect test, in situ attenuated total reflection Fourier transform infrared spectroscopy and density functional theory calculations have been conducted to elucidate the catalytic mechanism. The Br, O co-modification on the Cu(111) interface enhanced the adsorption of CO2 species. The hydrogen-bond effect from the doped Br atom regulated the kinetic processes of *H species in CO2RR and promoted the formation of *COH intermediate. The formed *COH facilitates the *CO-*COH coupling and promotes the C2+ selectivity finally. This comprehensive investigation not only provides an in-depth study and understanding of the catalytic process but also offers a promising strategy for designing efficient Cu-based catalysts with exceptional C2+ products.

The Tandem Nitrate and CO2 Reduction for Urea Electrosynthesis: Role of Surface N-Intermediates in CO2 Capture and Activation

Electrochemical reduction of CO2 and nitrate offers a promising avenue to produce valuable chemicals through the using of greenhouse gas and nitrogen-containing wastewater. However, the generally proposed reaction pathway of concurrent CO2 and nitrate reduction for urea synthesis requires the catalysts to be both efficient in both CO2 and nitrate reduction, thus narrowing the selection range of suitable catalysts. Herein, we demonstrate a distinct mechanism in urea synthesis, a tandem NO3 - and CO2 reduction, in which the surface amino species generated by nitrate reduction play the role to capture free CO2 and subsequent initiate its activation. When using the TiO2 electrocatalyst derived from MIL-125-NH2, it intrinsically exhibits low activity in aqueous CO2 reduction, however, in the presence of both nitrate and CO2, this catalyst achieves an excellent urea yield rate of 43.37 mmol ⋅ g-1 ⋅ h-1 and a Faradaic efficiency of 48.88 % at -0.9 V vs. RHE in a flow cell. Even at a low CO2 level of 15 %, the Faradaic efficiency of urea synthesis remains robust at 42.33 %. The tandem reduction procedure was further confirmed by in situ spectroscopies and theoretical calculations. This research provides new insights into the selection and design of electrocatalysts for urea synthesis.

Ultrafast and Parts-per-Billion-Level MEMS Gas Sensors by Hetero-Interface Engineering of 2D/2D Cu-TCPP@ZnIn2S4 with Enriched Surface Sulfur Vacancies

The primary challenge for resonant-gravimetric gas sensors is the synchronous improvement of the sensitivity and response time, which is restricted by low adsorption capacity and slow mass transfer in the sensing process and remains a great challenge. In this study, a novel 2D/2D Cu-TCPP@ZnIn2S4 composite is successfully constructed, in which Cu-TCPP MOF is used as a core substrate for the growth of 2D ultrathin ZnIn2S4 nanosheets with well-defined {0001} crystalline facets. The Cu-TCPP@ZnIn2S4 sensor exhibited high sensitivity (1.5 Hz@50 and 2.3 Hz@100 ppb), limit of detection (LOD: 50 ppb), and ultrafast (9 s @500 ppb) detection of triethylamine (TEA), which is the lowest LOD and the fastest sensor among the reported TEA sensors at room temperature, tackling the bottleneck for the ultrafast detection of the resonant-gravimetric sensor. These above results provide an innovative and easily achievable pathway for the synthesis of heterogeneous structure sensing materials.

Crystal Engineering of MOF-Derived Bimetallic Oxide Solid Solution Anchored with Au Nanoparticles for Photocatalytic CO2 Reduction to Syngas and C2 Hydrocarbons

Considering that CO2 reduction is mostly a multielectron reaction, it is necessary for the photocatalysts to integrate multiple catalytic sites and cooperate synergistically to achieve efficient photocatalytic CO2 reduction to various products, such as C2 hydrocarbons. Herein, through crystal engineering, we designed and constructed a metal-organic framework-derived Zr/Ti bimetallic oxide solid solution support, which was confirmed by X-ray diffraction, electron microscopy and X-ray absorption spectroscopy. After anchoring Au nanoparticles, the composite photocatalyst exhibited excellent performances toward photocatalytic CO2 reduction to syngas (H2 and CO production rates of 271.6 and 260.6 μmol g-1 h-1) and even C2 hydrocarbons (C2H4 and C2H6 production rates of 6.80 and 4.05 μmol g-1 h-1). According to the control experiments and theoretical calculations, the strong interaction between bimetallic oxide solid solution support and Au nanoparticles was found to be beneficial for binding intermediates and reducing CO2 reduction, highlighting the synergy effect of the catalytic system with multiple active sites.

Metal-Organic Frameworks-Derived Nanocarbon Materials and Nanometal Oxides for Photocatalytic Applications

Harnessing low-density solar energy and converting it into high-density chemical energy through photocatalysis has emerged as a promising avenue for the production of chemicals and remediation of environmental pollution, which contributes to alleviating the overreliance on fossil fuels. In recent years, metal-organic frameworks (MOFs) have gained widespread application in the field of photocatalysis due to their photostability, tunable structures, and responsiveness in the visible light range. However, most MOFs exhibit relatively low response to light, limiting their practical applications. MOFs-derived nanomaterials not only retain the inherent advantages of pristine MOFs but also show enhanced light adsorption and responsiveness. This review categorizes and summarizes MOFs-derived nanomaterials, including nanocarbons and nanometal oxides, providing representative examples for the synthetic strategies of each category. Subsequently, the recent research progress on MOFs-derived materials in photocatalytic applications are systematically introduced, specifically in the areas of photocatalytic water splitting to H2, photocatalytic CO2 reduction, and photocatalytic water treatment. The corresponding mechanisms involved in each photocatalytic reaction are elaborated in detail. Finally, the review discusses the challenges and further directions faced by MOFs-derived nanomaterials in the field of photocatalysis, highlighting their potential role in advancing sustainable energy production and environmental remediation.

Metallic Re3O2 with mixed-valence states

Rhenium (Re) shows the richest valence states from +2 to +7 in compounds, but its mixed-valence states are still missing thus far. In this work, we have explored the Re-O phase diagram with a wide range of stoichiometric compositions under high pressure through first-principles structural search calculations. Besides identifying two novel high-pressure phases of ReO2 and ReO3, we reveal two hitherto unknown Re-rich Re3O2 and O-rich ReO4 compounds. Re atoms in Re3O2 show mixed-valence states due to their inequivalent coordination environments, the first example in Re-based compounds. Electronic structure calculations demonstrate that the four discovered Re-O phases exhibit metallicity contributed by Re 5d electrons. Among them, ReO3 has a predicted critical temperature of up to 12 K at 50 GPa, derived from the interaction between Re 5d electrons and Re-derived low-frequency phonons. Our study points to new opportunities to disclose novel transition metal compounds with mixed-valence states.

Modulating Inorganic Dimensionality of Ultrastable Lead Halide Coordination Polymers for Photocatalytic CO2 Reduction to Ethanol

Lead halide hybrids have shown great potentials in CO2 photoreduction, but challenging to afford C2+ reduced products, especially using H2O as the reductant. This is largely due to the trade-off problem between instability of the benchmark 3D structures and low carrier mobility of quasi-2D analogues. Herein, the lead halide dimensionality of robust coordination polymers (CP) was modulated by organic ligands differing in a single-atom change (NH vs. CH2), in which the NH groups coordinate with interlamellar [PbI2] clusters to achieve the important 2D→3D transition. This first CP based on 3D cationic lead iodide sublattice possesses both high aqueous stability and a low exciton binding energy of 25 meV that is on the level of ambient thermal energy, achieving artificial photosynthesis of C2H5OH. Photophysical studies combined with theoretical calculations suggest the bridging [PbI2] clusters in the 3D structure not only results in enhanced carrier transport, but also promotes the intrinsic charge polarization to facilitate the C-C coupling. With trace loading of Rh cocatalyst, the apparent quantum efficiency of the 3D CP reaches 1.4 % at 400 nm with a high C2H5OH selectivity of 89.4 % (product basis), which presents one of the best photocatalysts for C2 products to date.

Tailoring Charge Separation in ZnIn2S4@CdS Hollow Nanocages for Simultaneous Alcohol Oxidation and CO2 Reduction under Visible Light

Artificial photosynthesis provides a sustainable strategy for producing usable fuels and fine chemicals and attracts broad research interest. However, conventional approaches suffer from low reactivity or low selectivity. Herein, we demonstrate that photocatalytic reduction of CO2 coupled with selective oxidation of aromatic alcohol into corresponding syngas and aromatic aldehydes can be processed efficiently and fantastically over the designed S-scheme ZnIn2S4@CdS core-shell hollow nanocage under visible light. In the ZnIn2S4@CdS heterostructure, the photoexcited electrons and holes with weak redox capacities are eliminated, while the photoexcited electrons and holes with powder redox capacities are separated spatially and preserved on the desired active sites. Therefore, even if there are no cocatalysts and no vacancies, ZnIn2S4@CdS exhibits high reactivity. For instance, the CO production of ZnIn2S4@CdS is about 3.2 and 3.4 times higher than that of pure CdS and ZnIn2S4, respectively. More importantly, ZnIn2S4@CdS exhibits general applicability and high photocatalytic stability. Trapping agent experiments, 13CO2 isotopic tracing, in situ characterizations, and theoretical calculations reveal the photocatalytic mechanism. This study provides a new strategy to design efficient and selective photocatalysts for dual-function redox reactions by tailoring the active sites and regulating vector separation of photoexcited charge carriers.

Well-defined diatomic catalysis for photosynthesis of C2H4 from CO2

Owing to the specific electronic-redistribution and spatial proximity, diatomic catalysts (DACs) have been identified as principal interest for efficient photoconversion of CO2 into C2H4. However, the predominant bottom-up strategy for DACs synthesis has critically constrained the development of highly ordered DACs due to the random distribution of heteronuclear atoms, which hinders the optimization of catalytic performance and the exploration of actual reaction mechanism. Here, an up-bottom ion-cutting architecture is proposed to fabricate the well-defined DACs, and the superior spatial proximity of CuAu diatomics (DAs) decorated TiO2 (CuAu-DAs-TiO2) is successfully constructed due to the compact heteroatomic spacing (2-3 Å). Owing to the profoundly low C-C coupling energy barrier of CuAu-DAs-TiO2, a considerable C2H4 production with superior sustainability is achieved. Our discovery inspires a novel up-bottom strategy for the fabrication of well-defined DACs to motivate optimization of catalytic performance and distinct deduction of heteroatom synergistically catalytic mechanism.

Accelerated Photocatalytic Carbon Dioxide Reduction and Water Oxidation under Spatial Synergy

Photocatalytic conversion of CO2 and H2 O into fuels and oxygen is a highly promising solution for carbon-neutral recycling. Traditionally, researchers have studied CO2 reduction and H2 O oxidation separately, overlooking potential synergistic interplay between these processes. This study introduces an innovative approach, spatial synergy, which encourages synergistic progress by bringing the two half-reactions into atomic proximity. To facilitate this, we developed a defective ZnIn2 S4 -supported single-atom Cu catalyst (Cu-SA/D-ZIS), which demonstrates remarkable catalytic performance with CO2 reduction rates of 112.5 μmol g-1  h-1 and water oxidation rates of 52.3 μmol g-1  h-1 , exhibiting a six-fold enhancement over D-ZIS. The structural characterization results indicated that the trapping effect of vacancy associates on single-atom copper led to the formation of an unsaturated coordination structure, Cu-S3 , consequently giving rise to the CuZn 'VS ⋅⋅VZn " defect complexes. FT-IR studies coupled with theoretical calculations reveal the spatially synergistic CO2 reduction and water oxidation on CuZn 'VS ⋅⋅VZn ", where the breakage of O-H in water oxidation is synchronized with the formation of *COOH, significantly lowering the energy barrier. Notably, this study introduces and, for the first time, substantiates the spatial synergy effect in CO2 reduction and H2 O oxidation through a combination of experimental and theoretical analyses, providing a fresh insight in optimizing photocatalytic system.

Photocatalytic ethylene production by oxidative dehydrogenation of ethane with dioxygen on ZnO-supported PdZn intermetallic nanoparticles

The selective oxidative dehydrogenation of ethane (ODHE) is attracting increasing attention as a method for ethylene production. Typically, thermocatalysts operating at high temperatures are needed for C-H activation in ethane. In this study, we describe a low temperature ( < 140 °C) photocatalytic route for ODHE, using O2 as the oxidant. A photocatalyst containing PdZn intermetallic nanoparticles supported on ZnO is prepared, affording an ethylene production rate of 46.4 mmol g-1 h-1 with 92.6% ethylene selectivity under 365 nm irradiation. When we employ a simulated shale gas feed, the photocatalytic ODHE system achieves nearly 20% ethane conversion while maintaining an ethylene selectivity of about 87%. The robust interface between the PdZn intermetallic nanoparticles and ZnO support plays a crucial role in ethane activation through a photo-assisted Mars-van Krevelen mechanism, followed by a rapid lattice oxygen replenishment to complete the reaction cycle. Our findings demonstrate that photocatalytic ODHE is a promising method for alkane-to-alkene conversions under mild conditions.

Mechanistic insights into C-C coupling in electrochemical CO reduction using gold superlattices

Developing in situ/operando spectroscopic techniques with high sensitivity and reproducibility is of great importance for mechanistic investigations of surface-mediated electrochemical reactions. Herein, we report the fabrication of highly ordered rhombic gold nanocube superlattices (GNSs) as substrates for surface-enhanced infrared absorption spectroscopy (SEIRAS) with significantly enhanced SEIRA effect, which can be controlled by manipulating the randomness of GNSs. Finite difference time domain simulations reveal that the electromagnetic effect accounts for the significantly improved spectroscopic vibrations on the GNSs. In situ SEIRAS results show that the vibrations of CO on the Cu2O surfaces have been enhanced by 2.4 ± 0.5 and 18.0 ± 1.3 times using GNSs as substrates compared to those on traditional chemically deposited gold films in acidic and neutral electrolytes, respectively. Combined with isotopic labeling experiments, the reaction mechanisms for C-C coupling of CO electroreduction on Cu-based catalysts are revealed using the GNSs substrates.