Sequential Superassembly of Nanofiber Arrays to Carbonaceous Ordered Mesoporous Nanowires and Their Heterostructure Membranes for Osmotic Energy Conversion

High-performance osmotic energy harvesting enabled by the synergism of space and surface charge in two-dimensional nanofluidic membranes

As promising prospects for renewable power harvesting, two-dimensional (2D) nanochannels for osmotic energy capture in a reverse electrodialysis arrangement have garnered significant attention. However, existing 2D nanochannel membranes have shown limited power generation capabilities due to challenges in balancing ion flux and selectivity. Here, we construct montmorillonite (MMT)/TEMPO-mediated oxidation cellulose nanofibers (TOCNFs) nanocomposite membranes for enhanced ion transmembrane transport. The intercalation of TOCNFs not only enlarges the interlayer distance, but also provides abundant space charge inside the nanochannels. Benefiting from the strong ion selectivity and high ion flux, the composite membrane achieves a remarkable power output of ∼16.57 W/m2 in the gradient of artificial seawater and river water, exceeding that of the state-of-the-art heterogeneous membrane-based osmotic energy conversion systems. Both experimental and theoretical findings confirm that the synergism of space and surface charge plays a crucial role in promoting osmotic energy conversion. This research contributes valuable insights into the optimization of 2D membranes for efficient clean energy harvesting purposes.

Superassembled Mesoporous Carbon-Fe2O3 Heterochannels for Photothermal-Enhanced Hyaluronidase Sensing

Developing an activity detection platform for hyaluronidase (HAase) is crucial for diagnosing and treating cancer. However, traditional detection of HAase is based on changes in the flow rate caused by viscosity or requires complex modifications and processing, which limits the detection accuracy and sensitivity. Herein, hyaluronic acid (HA)-modified mesoporous-based heterochannels (mesoporous carbon-doped γ-Fe2O3 nanoparticles/anodized aluminum oxide, MC-γ-Fe2O3/AAO) featuring ordered 3D transport frameworks and a photothermal property were developed for high performance HAase detection. The HA molecules on the surface of the mesoporous layer provide abundant active sites for HAase detection. An improved ionic current was realized after enzymatic hydrolysis reactions between HA and HAase due to enhanced surface charges and more hydrophilicity, leading to highly sensitive and accurate HAase detection. Notably, the detection performance can be further upgraded with the assistance of the photothermal property of γ-Fe2O3. An amplified detection current signal was achieved owing to a synergistic effect between ion currents and photoresponsive currents. A wide linear detection range from 1 to 50 U/mL and a low detection limit of 0.348 U/mL were obtained, achieving a 2% improvement under illumination. Importantly, the heterochannels have also been successfully applied for HAase detection in fetal bovine serum samples, manifesting considerable application prospects. This work provides a new strategy in constructing photoresponsive nanochannels with a photothermal property for a highly efficient biosensing platform.

Nanoarchitectonics in Advanced Membranes for Enhanced Osmotic Energy Harvesting

Osmotic energy, often referred to as "blue energy", is the energy generated from the mixing of solutions with different salt concentrations, offering a vast, renewable, and environmentally friendly energy resource. The efficacy of osmotic power production considerably relies on the performance of the transmembrane process, which depends on ionic conductivity and the capability to differentiate between positive and negative ions. Recent advancements have led to the development of membrane materials featuring precisely tailored ion transport nanochannels, enabling high-efficiency osmotic energy harvesting. In this review, ion diffusion in confined nanochannels and the rational design and optimization of membrane architecture are explored. Furthermore, structural optimization of the membrane to mitigate transport resistance and the concentration polarization effect for enhancing osmotic energy harvesting is highlighted. Finally, an outlook on the challenges that lie ahead is provided, and the potential applications of osmotic energy conversion are outlined. This review offers a comprehensive viewpoint on the evolving prospects of osmotic energy conversion.

Unipolar Ionic Diode Nanofluidic Membranes Enabled by Stepped Mesochannels for Enhanced Salinity Gradient Energy Harvesting

Developing ionic diode membranes featuring asymmetric structures is in high demand for salinity gradient energy harvesting. These membranes offer benefits in mitigating ion concentration polarization, thereby promoting ion permeability. However, most reported works focus on the role of heterogeneous charge-based bipolar ionic diode membranes for ion concentration polarization suppression, with comparatively less attention given to maintaining ion selectivity. Herein, unipolar ionic diode nanofluidic mesoporous silica membranes featuring stepped mesochannels were developed via a micellar sequential oriented interfacial self-assembly strategy as a salinity gradient energy harvester. Due to the asymmetric mesochannels and unipolar structure (both sides carry negative charge), the ionic diode membranes exhibit a strong rectification ratio of ∼15.91 to facilitate unidirectional ion transport while maintaining excellent cation selectivity (cation transfer number of ∼0.85). Besides, the vertically aligned mesochannels significantly reduce ion transport resistance, generating a high ionic flux. Consequently, the unipolar ionic diode nanofluidic membranes demonstrate a power output of 5.88 W/m2 between artificial sea and river water. The unipolar feature gives notable enhancements of 296% and 144% in power output compared to the symmetric membrane and bipolar ionic diode membrane, respectively. This work opens up new routes for designing ionic diode membranes for salinity gradient energy harvesting.

Template Evolution Induced Relay Self-Assembly for Mesoporous Carbonaceous Materials via Hydrothermal Carbonization

Constructing carbonaceous materials with versatile surface structures still remains a great challenge due to limited self-assembly methods, especially at high temperatures. This study presents an innovative template evolution induced relay self-assembly (TEIRSA) for the fabrication of large polyoxometalate (POM)-mixed carbonaceous nanosheets featuring surface mesoporous structures through hydrothermal carbonization (HTC). The method employs POM and acetone as additives, cleverly modulating the Ostwald ripening-like process of P123-based micelles, effectively addressing the instability challenges inherent in traditional soft-template methods, especially within the demanding carbohydrate HTC process. Additionally, this method allows for the independent regulation of surface architectures through the selection of organic additives. The resulting nanosheets exhibit diverse surface morphologies, including surface spherical mesopores, 1D open channels, and smooth surfaces. Their unexpectedly versatile properties have swiftly garnered recognition, showing potential in the application of lithium-sulfur batteries.

Scalable Fabrication of Ionic-Conductive Covalent Organic Framework Fibers for Capturing of Sustainable Osmotic Energy

High-performance covalent organic framework (COF) fibers are demanded for an efficient capturing of blue osmotic power because of their excellent durability, simple integration, and large scalability. However, the scalable production of COF fibers is still very challenging due to the poor solubility and fragile structure of COFs. Herein, for the first time, it is reported that COF dispersions can be continuously processed into macroscopic, meter-long, and pure COF fibers using a wet spinning approach. The two presented COF fibers can be directly used for capturing of osmotic energy, avoiding the production of composite materials that require other additives and face challenges such as phase separation and environmental issues induced by the additives. A COF fiber exhibits power densities of 70.2 and 185.3 W m-2 at 50-fold and 500-fold salt gradients, respectively. These values outperform those of most reported systems, which indicate the high potential of COF fibers for capturing of blue osmotic energy.

Nano-Confined Effect and Heterojunction Promoted Exciton Separation for Light-Boosted Osmotic Energy Conversion

The osmotic energy conversion properties of biomimetic light-stimulated nanochannels have aroused great interest. However, the power output performance is limited by the low light-induced current and energy conversion efficiency. Here, nanochannel arrays with simultaneous modification of ZnO and di-tetrabutylammonium cis-bis(isothiocyanato)bis(2,20-bipyridyl-4,40-dicarboxylato) ruthenium (II) (N719) onto anodic aluminum oxide (AAO) to combine the nano-confined effect and heterojunction is designed, which demonstrate rectified ion transport behavior due to the asymmetric composition, structure and charge. High cation selectivity and ion flux contribute to the high power density of ≈7.33 W m-2 by mixing artificial seawater and river water. Under light irradiation, heterojunction promoted the production and separation of exciton, enhanced cation selectivity, and improved the utilization efficiency of osmotic energy, providing a remarkable power density of ≈18.49 W m-2 with an increase of 252% and total energy conversion efficiency of 30.43%. The work opens new insights into the biomimetic nanochannels for high-performance energy conversion.

Polyoxometalate-based plasmonic electron sponge membrane for nanofluidic osmotic energy conversion

Nanofluidic membranes have demonstrated great potential in harvesting osmotic energy. However, the output power densities are usually hampered by insufficient membrane permselectivity. Herein, we design a polyoxometalates (POMs)-based nanofluidic plasmonic electron sponge membrane (PESM) for highly efficient osmotic energy conversion. Under light irradiation, hot electrons are generated on Au NPs surface and then transferred and stored in POMs electron sponges, while hot holes are consumed by water. The stored hot electrons in POMs increase the charge density and hydrophilicity of PESM, resulting in significantly improved permselectivity for high-performance osmotic energy conversion. In addition, the unique ionic current rectification (ICR) property of the prepared nanofluidic PESM inhibits ion concentration polarization effectively, which could further improve its permselectivity. Under light with 500-fold NaCl gradient, the maximum output power density of the prepared PESM reaches 70.4 W m-2, which is further enhanced even to 102.1 W m-2 by changing the ligand to P5W30. This work highlights the crucial roles of plasmonic electron sponge for tailoring the surface charge, modulating ion transport dynamics, and improving the performance of nanofluidic osmotic energy conversion.

Bioinspired 2D nanofluidic membranes for energy applications

Bioinspired two-dimensional (2D) nanofluidic membranes have been explored for the creation of high-performance ion transport systems that can mimic the delicate transport functions of living organisms. Advanced energy devices made from these membranes show excellent energy storage and conversion capabilities. Further research and development in this area are essential to unlock the full potential of energy devices and facilitate the development of high-performance equipment toward real-world applications and a sustainable future. However, there has been minimal review and summarization of 2D nanofluidic membranes in recent years. Thus, it is necessary to carry out an extensive review to provide a survey library for researchers in related fields. In this review, the classification and the raw materials that are used to construct 2D nanofluidic membranes are first presented. Second, the top-down and bottom-up methods for constructing 2D membranes are introduced. Next, the applications of bioinspired 2D membranes in osmotic energy, hydraulic energy, mechanical energy, photoelectric conversion, lithium batteries, and flow batteries are discussed in detail. Finally, the opportunities and challenges that 2D nanofluidic membranes are likely to face in the future are envisioned. This review aims to provide a broad knowledge base for constructing high-performance bioinspired 2D nanofluidic membranes for advanced energy applications.

Interfacial Assembly of 2D Graphene-Derived Ion Channels for Water-Based Green Energy Conversion

The utilization of sustained and green energy is believed to alleviate increasing menace of global environmental concerns and energy dilemma. Interfacial assembly of 2D graphene-derived ion channels (2D-GDICs) with tunable ion/fluid transport behavior enables efficient harvesting of renewable green energy from ubiquitous water, especially for osmotic energy harvesting. In this review, various interfacial assembly strategies for fabricating diverse 2D-GDICs are summarized and their ion transport properties are discussed. This review analyzes how particular structure and charge density/distribution of 2D-GDIC can be modulated to minimize internal resistance of ion/fluid transport and enhance energy conversion efficiency, and highlights stimuli-responsive functions and stability of 2D-GDIC and further examines the possibility of integrating 2D-GDIC with other energy conversion systems. Notably, the presented preparation and applications of 2D-GDIC also inspire and guide other 2D materials to fabricate sophisticated ion channels for targeted applications. Finally, potential challenges in this field is analyzed and a prospect to future developments toward high-performance or large-scale real-word applications is offered.

A facile strategy for the preparation of carbon nanotubes/polybutadiene crosslinked composite membrane and its application in osmotic energy harvesting

The osmotic energy between riverine water and seawater can be converted into electricity by reverse electrodialysis (RED). However, the facile fabrication of advanced RED membranes with high energy conversion efficiencies, large areas, and excellent mechanical properties remains a challenge. Carbon nanotubes (CNTs) exhibit excellent conductivity and provide suitable channels for ion transport but cannot form membranes independently, which limits the related applications in osmotic energy conversion. Herein, a new organic-inorganic composite membrane is prepared by combining hydroxyl-terminated polybutadiene as a matrix and carbon nanotubes as transport nanochannels. The nanotubes are pre-subjected to plasma treatment to increase the surface charge density and transport capacity of the nanochannels, improving the ion selectivity and energy conversion efficiency. Under actual seawater/river water conditions, the developed membrane delivers a power density of ∼5.1 W/m2 and shows good mechanical strength (219 MPa). Our work provides a facile solution to the problem posed by the inability of ideal nanochannels to form membranes independently and paves the way for the application of RED membranes in osmotic energy conversion.

Asymmetric Nanoporous Alumina Membranes for Nanofluidic Osmotic Energy Conversion

The potential of harnessing osmotic energy from the interaction between seawater and river water has been recognized as a promising, eco-friendly, renewable, and sustainable source of power. The reverse electrodialysis (RED) technology has gained significant interest for its ability to generate electricity by combining concentrated and diluted streams with different levels of salinity. Nanofluidic membranes with tailored ion transport dynamics enable efficient harvesting of renewable osmotic energy. In this regard, anodic aluminum oxide (AAO) membranes with abundant nanochannels provide a cost-effective nanofluidic platform to obtain structures with a high density of ordered pores. AAO can be utilized in constructing asymmetric composite membranes with enhanced ion flux and selectivity to improve output power generation. In this review, we first present the fundamental structure and properties of AAO, followed by summarizing the fabrication techniques for asymmetric membranes using AAO and other nanostructured materials. Subsequently, we discuss the materials employed in constructing asymmetric structures incorporating AAO while emphasizing how material selection and design can resist and promote efficient energy conversion. Finally, we provide an outlook on future applications and address the challenges that need to be overcome for successful osmotic energy conversion.

Room-Temperature Synthesis of a COFs Membrane Via LBL Self-Assembly Strategy for Energy Harvesting

The covalent organic frameworks (COFs) membrane with ordered and confined one-dimensional channel has been considered as a promising material to harvest the salinity gradient energy from the seawater and river water. However, the application of the COFs in the field of energy conversion still faces the challenges in membrane preparation. Herein, energy harvesting is achieved by taking advantage of a COFs membrane where TpDB-HPAN is synthesized via layer-by-layer self-assembly strategy at room temperature. The carboxy-rich TpDB COFs can be expediently assembled onto the substrate with an environmental-friendly method. The increased open-circuit voltage (Voc ) endows TpDB-HPAN membrane with a remarkable energy harvesting performance. More importantly, the application perspective is also illuminated by the cascade system. With the advantages of green synthesis, the TpDB-HPAN membrane can be considered as a low-cost and promising candidate for energy conversion.

Robust Cellulose Nanocrystal-Based Self-Assembled Composite Membranes Doped with Polyvinyl Alcohol and Graphene Oxide for Osmotic Energy Harvesting

Osmotic energy from the salinity gradients represents a promising energy resource with stable and sustainable characteristics. Nanofluidic membranes can be considered as powerful alternatives to the traditional low-performance ion exchange membrane to achieve high-efficiency osmotic energy harvesting. However, the development of a highly efficient and easily scalable core membrane component from low-cost raw materials remains challenging. Here, a composite membrane based on the self-assembly of cellulose nanocrystals (CNCs) with polyvinyl alcohol (PVA) and graphene oxide (GO) nanoflakes as additives is developed to provide a solution. The introduction of soft PVA polymer significantly improves the mechanical strength and water stability of the composite membrane by forming a nacre-like structure. Benefiting from the abundant negative charges of CNC nanorods and GO nanoflakes and the generated network nanochannels, the composite membrane demonstrates a good cation-selective transport capacity, thus contributing to an optimal osmotic energy conversion of 6.5 W m-2 under a 100-fold salinity gradient and an exemplary stability throughout 25 consecutive days of operation. This work provides an option for the development of nanofluidic membranes that can be easily produced on a large scale from well-resourced and sustainable biomass materials for high-efficiency osmotic energy conversion.

Functional Carbon from Nature: Biomass-Derived Carbon Materials and the Recent Progress of Their Applications

Biomass is considered as a promising source to fabricate functional carbon materials for its sustainability, low cost, and high carbon content. Biomass-derived-carbon materials (BCMs) have been a thriving research field. Novel structures, diverse synthesis methods, and versatile applications of BCMs have been reported. However, there has been no recent review of the numerous studies of different aspects of BCMs-related research. Therefore, this paper presents a comprehensive review that summarizes the progress of BCMs related research. Herein, typical types of biomass used to prepare BCMs are introduced. Variable structures of BCMs are summarized as the performance and properties of BCMs are closely related to their structures. Representative synthesis strategies, including both their merits and drawbacks are reviewed comprehensively. Moreover, the influence of synthetic conditions on the structure of as-prepared carbon products is discussed, providing important information for the rational design of the fabrication process of BCMs. Recent progress in versatile applications of BCMs based on their morphologies and physicochemical properties is reported. Finally, the remaining challenges of BCMs, are highlighted. Overall, this review provides a valuable overview of current knowledge and recent progress of BCMs, and it outlines directions for future research development of BCMs.

Interfacial Super-Assembly of Intertwined Nanofibers toward Hybrid Nanochannels for Synergistic Salinity Gradient Power Conversion

Capturing the abundant salinity gradient power into electric power by nanofluidic systems has attracted increasing attention and has shown huge potential to alleviate the energy crisis and environmental pollution problems. However, not only the imbalance between permeability and selectivity but also the poor stability and high cost of traditional membranes limit their scale-up realistic applications. Here, intertwined "soft-hard" nanofibers/tubes are densely super-assembled on the surface of anodic aluminum oxide (AAO) to construct a heterogeneous nanochannel membrane, which exhibits smart ion transport and improved salinity gradient power conversion. In this process, one-dimensional (1D) "soft" TEMPO-oxidized cellulose nanofibers (CNFs) are wrapped around "hard" carbon nanotubes (CNTs) to form three-dimensional (3D) dense nanochannel networks, subsequently forming a CNF-CNT/AAO hybrid membrane. The 3D nanochannel networks constructed by this intertwined "soft-hard" nanofiber/tube method can significantly enhance the membrane stability while maintaining the ion selectivity and permeability. Furthermore, benefiting from the asymmetric structure and charge polarity, the hybrid nanofluidic membrane displays a low membrane inner resistance, directional ionic rectification characteristics, outstanding cation selectivity, and excellent salinity gradient power conversion performance with an output power density of 3.3 W/m². Besides, a pH sensitive property of the hybrid membrane is exhibited, and a higher power density of 4.2 W/m² can be achieved at a pH of 11, which is approximately 2 times more compared to that of pure 1D nanomaterial based homogeneous membranes. These results indicate that this interfacial super-assembly strategy can provide a way for large-scale production of nanofluidic devices for various fields including salinity gradient energy harvesting.

Janus Metal-Organic Framework Membranes Boosting the Osmotic Energy Harvesting

The unique ion-transport properties in nanoconfined pores enable nanofluidic devices with great potential in harvesting osmotic energy. The energy conversion performance could be significantly improved by the precise regulation of the "permeability-selectivity" trade-off and the ion concentration polarization effect. Here, we take the advantage of electrodeposition technique to fabricate a Janus metal-organic framework (J-MOF) membrane that possesses rapid ion-transport capability and impeccable ion selectivity. The asymmetric structure and asymmetric surface charge distribution of the J-MOF device can suppress the ion concentration polarization effect and enhance the ion charge separation, exhibiting an improved energy harvesting performance. An output power density of 3.44 W/m² has been achieved with the J-MOF membrane at a 1000-fold concentration gradient. This work provides a new strategy for fabricating high-performance energy-harvesting devices.

Engineering 2D Aligned Nanowires Assembled Porous Hetero-Membrane for Smart Ion Transport

Engineering 2D nanosheets with well-defined porous structures and their assembled heterostructure membrane is a promising method to improve osmotic energy conversion. However, it is still a great challenge to directly fabricate 2D nanosheets with regular parallel nanochannels in aqueous media. Here, the desired functional nanosheets and heterostructure membrane device are successfully prepared through a simple interfacial assembly strategy. In this method, monolayer cylindrical monomicelles closely arrange and assemble on the surfaces of graphene oxide, and the resulting nanosheets with monolayered aligned nanowire polymer arrays parallel to the substrate surfaces are then obtained. Subsequently, a heterostructured membrane is constructed by assembling these 2D nanosheets on macroporous alumina. The nanofluidic membrane device with asymmetric geometry and charge polarity exhibits smart ion transport properties, and the output osmotic power density is ≈1.22 and 1.63 times over the reported pure 2D graphene oxide and biomass-derived membranes, respectively. In addition, theoretical calculations are carried out to reveal the mechanisms for ion selectivity and salinity gradient energy conversion. This monolayered interfacial assembly approach can open up new avenues for the synthesis of functional porous low-dimensional nanomaterials and membrane devices, and expand the palette of materials selection for many applications.

Super-assembled mesoporous thin films with asymmetric nanofluidic channels for sensitive and reversible electrical sensing

Bioinspired artificial nanochannels have emerged as promising candidates for developing smart nanofluidic sensors due to their highly controllable size and surface functionality. However, little attention has been paid to the role of the outer surface of the nanochannels in enhancing the detection sensitivity. Herein, an asymmetric nanochannel-based responsive detection platform with ultrathin tannic acid modified mesoporous silica (TA-MS) layer and alumina oxide (AAO) thin film is prepared through super-assembly strategy. The functional TA-MS outer surface layer provides abundant phenolic groups on the nanochannels for ions and molecules transport, which paves the way for the development of heterochannels for label-free, reversible and highly sensitive dopamine (DA) detection based off of cation displacement effect. Notably, by engineering optimal thickness of the TA-MS, the sensing performance can be further improved. After optimization, the linear response ranges for DA detection are 0.001-1 μM, 1-10 μM and 10-200 μM with the detection limit of 0.1 nM. The prepared sensor exhibits stable reversibility after several detection cycles. In addition, this method was successfully applied for DA detection in fetal bovine serum sample. Theoretical calculations further prove the detection mechanism. This work opens a new horizon of using mesoporous materials to construct nanofluidic sensors for ultrasensitive small molecule detection and recognition.

In Situ Interfacial Super-Assembly of Nanobiohybrids through Plant for Food-Grade Oral Medicine

Developing a next-generation oral drug delivery system with enhanced efficacy and limited side effects is highly desired for refractory diseases treatment such as colitis. The bioinspired assembly of drugs within food-grade plants highlights its potential value of this unique hybrid material. Herein, we report the preparation of drug-encapsulated vegetable nanobiohybrid superassembled frameworks as an oral food-grade drug delivery system (SAF-FGDD). The in situ superassembly of SAF-FGDD driven by natural transpiration from living plants is carried out through a sustainable and low-carbon manner, allowing for the assembly of distinct precursors inside edible living plants. As an example, mesalazine, an anti-inflammatory drug, is encapsulated in the frameworks for colitis treatment. The cell activity and feeding experiments of zebrafish and mice demonstrate the excellent efficacy of this SAF-FGDD. Compared with those of the control groups, the disease activity index scores and histological scores of the SAF-FGDD group were significantly decreased by 80% and 98%, respectively. The improved performance is attributed to the biocompatibility and protective effect of SAF-FGDD, allowing for abundant mesalazine to be released and act at the site of the intestine during the process of food digestion. In combination with mature soilless cultivation technology, plant-based organisms with natural structure-forming abilities possess broad commercial prospects in large-scale production of various food-grade functional materials.

Membranes for Osmotic Power Generation by Reverse Electrodialysis

In recent years, the utilization of the selective ion transport through porous membranes for osmotic power generation (blue energy) has received a lot of attention. The principal of power generation using the porous membranes is same as that of conventional reverse electrodialysis (RED), but nonporous ion exchange membranes are conventionally used for RED. The ion transport mechanisms through the porous and nonporous membranes are considerably different. Unlike the conventional nonporous membranes, the ion transport through the porous membranes is largely dictated by the principles of nanofluidics. This owes to the fact that the osmotic power generation via selective ion transport through porous membranes is often referred to as nanofluidic reverse electrodialysis (NRED) or nanopore-based power generation (NPG). While RED using nonporous membranes has already been implemented on a pilot-plant scale, the progress of NRED/NPG has so far been limited in the development of small-scale, novel, porous membrane materials. The aim of this review is to provide an overview of the membrane design concepts of nanofluidic porous membranes for NPG/NRED. A brief description of material design concepts of conventional nonporous membranes for RED is provided as well.

Monomicellar assembly to synthesize structured and functional mesoporous carbonaceous nanomaterials

The large pores of functional mesoporous carbonaceous nanomaterials have broad accessibility, making them efficient substrates for the mass transport of chemicals in biomedical applications, gas separation, catalysis, sensing, and energy storage and conversion. Recently, the assembly of monomicelles has been used to control the nanostructure and mesoporosity of carbonaceous nanomaterials, where the structure-oriented unit is a single micelle made up of block copolymers/surfactants and of precursor species (via hydrogen bonds, Coulombic and/or other noncovalent interactions). Each monomicelle then represents a template for a single mesopore, and multiple monomicelles can be stacked like LEGO blocks. After polymerization of the precursor species (in this case dopamine), carbonization results in the carbonaceous nanomaterial. The micellar size, structure and shape can be easily tuned by altering the synthetic conditions, providing a high degree of control over the structure of the final product, which can therefore be shaped into original nanostructures otherwise difficult to synthesize using conventional templating methods. Here we provide a detailed procedure for the preparation of the monomicelles, the monomicellar assembly into mesostructured polymeric samples and the conversion of polymeric samples to carbonaceous frameworks. We describe the functional characterization of two mesoporous carbonaceous nanomaterials that demonstrate excellent sodium-ion storage performance and oxygen reduction reactivity, respectively. The monomicellar assembly process for the synthesis of the ordered mesoporous polymers requires ~5 h; the synthesis, including subsequent centrifugation, freeze drying and carbonization, requires 2 d, whereas the entire procedure, including the characterization of the nanomaterials, requires ~4 d.

An Ionic Diode Covalent Organic Framework Membrane for Efficient Osmotic Energy Conversion

Heterogeneous membranes that exhibit an ionic diode effect are promising candidates for osmotic energy conversion. However, existing heterogeneous membranes lack molecular-level designed ion channels, thereby limiting their power densities. Here, we demonstrate ionic diode covalent organic framework (COF) membranes with well-defined ion channels, asymmetric geometry and surface charge polarity as high-performance osmotic power generators. The COF diode membranes are comprised of heterojunctions combining a positively charged ultrathin COF layer and a negatively charged COF layer supported by a porous COF nanofiber scaffold, exhibiting an ionic diode effect that effectuates fast unidirectional ion diffusion and anion selectivity. Density functional theory calculations reveal that the differentiated interactions between anions and COF channels contributed to superior I^- transport over other anions. Consequently, the COF diode membranes achieved high output power densities of 19.2 and 210.1 W m^-2 under a 50-fold NaCl and NaI gradient, respectively, outperforming state-of-the-art heterogeneous membranes. This work suggests the great potential of COF diode membranes for anion transport and energy-related applications.

Well-Defined Nanostructures by Block Copolymers and Mass Transport Applications in Energy Conversion

With the speedy progress in the research of nanomaterials, self-assembly technology has captured the high-profile interest of researchers because of its simplicity and ease of spontaneous formation of a stable ordered aggregation system. The self-assembly of block copolymers can be precisely regulated at the nanoscale to overcome the physical limits of conventional processing techniques. This bottom-up assembly strategy is simple, easy to control, and associated with high density and high order, which is of great significance for mass transportation through membrane materials. In this review, to investigate the regulation of block copolymer self-assembly structures, we systematically explored the factors that affect the self-assembly nanostructure. After discussing the formation of nanostructures of diverse block copolymers, this review highlights block copolymer-based mass transport membranes, which play the role of “energy enhancers” in concentration cells, fuel cells, and rechargeable batteries. We firmly believe that the introduction of block copolymers can facilitate the novel energy conversion to an entirely new plateau, and the research can inform a new generation of block copolymers for more promotion and improvement in new energy applications.

Nanofluidic Membranes to Address the Challenges of Salinity Gradient Energy Harvesting: Roles of Nanochannel Geometry and Bipolar Soft Layer

Researchers are looking for new, clean, and accessible sources of energy due to rising global warming caused by the usage of fossil fuels and the irreversible harm that this does to the environment. Water salinity is one of the newest and most accessible renewable energy sources, which has sparked a lot of interest. Reverse electrodialysis (RED) has been utilized in the past to turn saline water into electricity. NRED, a reverse electrodialysis method utilizing nanofluidics, has gained popularity as nanoscale research advances. Developing and evaluating NRED systems is time-consuming and expensive due to the method's novelty; thus, modeling is required to identify the best locations for implementation and to comprehend its workings. In this work, we examined the influence of bipolar soft layer and nanochannel geometry on ion transfer and power production simultaneously. To achieve this, the two trumpet and cigarette geometries were coated with a bipolar soft layer so that both negative (type (I)) and positive (type (II)) charges could be positioned in the nanochannel's small aperture. After that, at steady state conditions, the Poisson-Nernst-Planck (PNP) and Navier-Stokes (NS) equations were solved concurrently. The findings revealed that altering the nanochannel coating from type (I) to type (II) alters the channel's selectivity from cations to anions. An approximately 22-fold improvement in energy conversion efficiency was achieved by raising the concentration ratio from 10 to 100 for the type (I) trumpet nanochannel. Type (I) cigarette geometry is advised for maximum power output at low and medium concentration ratios, whereas type (I) trumpet geometry is recommended for the maximum power production at high concentration ratios.

Super-Assembled Chiral Mesostructured Heteromembranes for Smart and Sensitive Couple-Accelerated Enantioseparation

In the context of sustainable development, chirality, especially chiral drugs, has attracted great interest in the pharmaceutical industry, yet the smart and sensitive separation of enantiomers still presents a major scientific challenge. Herein, inspired by supramolecular templating via chiral transcription nanoparticles, an artificial chiral nanochannel membrane with asymmetric structure, porosity, and abundant chiral surface is fabricated for smart and sensitive enantiomer recognition and separation. Constructed from chiral transcript mesoporous silica (CMS) super-assembled on a porous anode alumina oxide (AAO) support, the obtained heterostructured chiral membrane (CMS/AAO) exhibits enhanced enantioseparation (approximately 170% compared to the supramolecular-templated nanoparticles) among a series of amino acids with various isoelectric points (PIs). Especially for amino acids with a PI greater than 7, the couple-accelerated enantioseparation (CAE) can be achieved for the first time. Further analysis using an osmotic energy conversion test and simulations based on the Poisson-Nernst-Planck (PNP) equations confirm that the heterostructure and charge polarity are the key to achieve chiral amino acids and ion separation. We expect this work will inspire the development of multifunctional membrane systems for more sustainable and energy-efficient enantioseparation.

Anomalous thermo-osmotic conversion performance of ionic covalent-organic-framework membranes in response to charge variations

Increasing the charge density of ionic membranes is believed to be beneficial for generating high output osmotic energy. Herein, we systematically investigated how the membrane charge populations affect permselectivity by decoupling their effects from the impact of the pore structure using a multivariate strategy for constructing covalent-organic-framework membranes. The thermo-osmotic energy conversion efficiency is improved by increasing the membrane charge density, affording 210 W m⁻² with a temperature gradient of 40 K. However, this enhancement occurs only within a narrow window, and subsequently, the efficiency plateaued beyond a threshold density (0.04 C m⁻²). The complex interplay between pore-pore interactions in response to charge variations for ion transport across the upscaled nanoporous membranes helps explain the obtained results. This study has far-reaching implications for the rational design of ionic membranes to augment energy extraction rather than intuitively focusing on achieving high densities.

The development of ionic membranes with a high charge population is critical for realizing efficient thermo-osmotic energy conversion. Here, the authors demonstrated that the thermo-osmotic energy conversion efficiency can be improved by increasing the membrane charge density but this enhancement only occurs within a narrow window.

One Porphyrin Per Chain Self-Assembled Helical Ion-Exchange Channels for Ultrahigh Osmotic Energy Conversion

Ion-exchange membranes (IEMs) convert osmotic energy into electricity when embedded in a reverse electrodialysis cell. IEMs with both high permselectivity and ionic conductivity are highly needed to increase the energy conversion efficiency. The ionic conductivity can be improved by increasing the content of immobile charge carriers, but it is always accompanied by undesirable permselectivity decrease due to excess swelling. Until now, breaking the permselectivity-conductivity tradeoff still has remained a challenge. Here, we demonstrate a membrane with the least ion-exchange capacity (∼10^-2 mequiv g^-1), generating an ultrahigh power density of 19.3 W m^-2 at a 50-fold concentration ratio. The membrane is made of a porphyrin-core four-star block copolymer (p-BCP), forming the high-density helical porphyrin channels (∼10¹¹ cm^-2) under the synergistic effect of BCP self-assembly and porphyrin π-π stacking. The porphyrin channel shows high Cl^- selectivity and high conductivity, benefiting high-performance osmotic energy conversion. This economic and facile membrane design strategy provides a promising approach to developing a new generation of IEMs.

Large-Area Covalent Organic Polymers Membrane via Sol-Gel Approach for Harvesting the Salinity Gradient Energy

Many materials with nanofluidic channels are exploited to achieve salinity gradient energy conversion. However, most materials are fragile, difficult to process, or only prepared into a limited size, which greatly restricts their practical application in the future. Herein, a covalent organic polymers membrane with high mechanical property and stability is fabricated, which can keep integrity in harsh conditions for up to 1 month. In addition, by using the sol-gel approach, a large-area membrane with an area of 26 × 26 cm is expediently fabricated in lab conditions. When the membrane is applied to salinity gradient energy conversion, the maximum output power density is up to 6.21 W m^-2 . This work provides a simple method for the fabrication of large-area membrane for salinity gradient energy conversion in future real-world applications.

Thermo-Osmotic Energy Conversion Enabled by Covalent-Organic-Framework Membranes with Record Output Power Density

A vast amount of energy can be extracted from the untapped low-grade heat from sources below 100 °C and the Gibbs free energy from salinity gradients. Therefore, a process for simultaneous and direct conversion of these energies into electricity using permselective membranes was developed in this study. These membranes screen charges of ion flux driven by the combined salinity and temperature gradients to achieve thermo-osmotic energy conversion. Increasing the charge density in the pore channels enhanced the permselectivity and ion conductance, leading to a larger osmotic voltage and current. A 14-fold increase in power density was achieved by adjusting the ionic site population of covalent organic framework (COF) membranes. The optimal COF membrane was operated under simulated estuary conditions at a temperature difference of 60 K, which yielded a power density of ≈231 W m^-2 , placing it among the best performing upscaled membranes. The developed system can pave the way to the utilization of the enormous supply of untapped osmotic power and low-grade heat energy, indicating the tremendous potential of using COF membranes for energy conversion applications.

Interfacial Superassembly of Mesoporous Titania Nanopillar-Arrays/Alumina Oxide Heterochannels for Light- and pH-Responsive Smart Ion Transport

Stimuli-responsive nanochannels have attracted extensive attention in various fields owing to their precise regulation ability of ionic transportation. However, the poor controllability and functionality as well as responding to only one type of external stimulus still impede the development of the smart nanochannels. Here, we demonstrate a novel heterogeneous membrane composed of ordered mesoporous titania nanopillar-arrays/anodic aluminum oxide (MTI/AAO) using an interfacial superassembly strategy, which can achieve intelligent light and pH multimodulation ion transport. The MTI/AAO membranes are generated through the self-assembly of templates, followed by interfacial superassembly of micelles on AAO, and then the nanostructure and phase transformation of titania. The presence of the MTI layer with anatase crystal endows the heterogeneous membrane with an excellent light-responsive current density of 219.2 μA·cm^-2, which is much higher than that of a reported traditional light-responsive nanofluidic device. Furthermore, the MTI/AAO heterogeneous membranes with an asymmetric structure exhibit excellent rectification performance. Moreover, pH-regulated surface charge polarity leads to a reversal of current rectification polarity. This light and pH multiresponsive membrane realizes efficient, sensitive, and stable ion regulation, extending the traditional nanochannel from single modulation to smart multimodulation.

Super-assembly of freestanding graphene oxide-aramid fiber membrane with T-mode subnanochannels for sensitive ion transport

Biomimetic nacre-like membranes composed of two-dimensional lamellar sheets and one-dimensional nanofibers exhibit high mechanical strength and excellent stability. Thus, they show substantial application in the field of membrane science and water purification. However, the limited techniques for the assembly of two-dimensional lamellar membranes and one-dimensional nanofibers hamper their development and application. Herein, we developed a nacre-like and freestanding graphene oxide/aramid fiber membrane with abundant T-mode subnanochannels by introducing aramid fibers into graphene oxide interlamination via the super-assembly interaction between graphene oxide and aramid fibers. Benefiting from the presence of stable and adjustable sub-nanometer-size ion transport channels, the graphene oxide/aramid fiber composite membrane exhibited excellent mono/divalent ion selectivity of 3.51 (K⁺/Mg²⁺), which is superior to that of the pure graphene oxide membrane. The experimental results suggest that the mono/divalent ion selectivity is ascribed to the subnanochannels in the graphene oxide/aramid fiber composite membrane, electrostatic repulsion interaction and strong interaction between the divalent metal ion and carboxyl groups. Moreover, the composite membrane exhibited remarkable charge selectivity with a K⁺/Cl^- ratio of up to ∼158, indicating that this graphene oxide/aramid fiber composite membrane has great potential for application in energy conversion. This study provides an avenue to prepare freestanding and nacre-like composite membranes with abundant T-mode ion transport channels for ion recognition and energy conversion, which also shows great application prospects in the field of membrane science and water purification.

Nanofluidic osmotic power generators - advanced nanoporous membranes and nanochannels for blue energy harvesting

The increase of energy demand added to the concern for environmental pollution linked to energy generation based on the combustion of fossil fuels has motivated the study and development of new sustainable ways for energy harvesting. Among the different alternatives, the opportunity to generate energy by exploiting the osmotic pressure difference between water sources of different salinities has attracted considerable attention. It is well-known that this objective can be accomplished by employing ion-selective dense membranes. However, so far, the current state of this technology has shown limited performance which hinders its real application. In this context, advanced nanostructured membranes (nanoporous membranes) with high ion flux and selectivity enabling the enhancement of the output power are perceived as a promising strategy to overcome the existing barriers in this technology. While the utilization of nanoporous membranes for osmotic power generation is a relatively new field and therefore, its application for large-scale production is still uncertain, there have been major developments at the laboratory scale in recent years that demonstrate its huge potential. In this review, we introduce a comprehensive analysis of the main fundamental concepts behind osmotic energy generation and how the utilization of nanoporous membranes with tailored ion transport can be a key to the development of high-efficiency blue energy harvesting systems. Also, the document discusses experimental issues related to the different ways to fabricate this new generation of membranes and the different experimental set-ups for the energy-conversion measurements. We highlight the importance of optimizing the experimental variables through the detailed analysis of the influence on the energy capability of geometrical features related to the nanoporous membranes, surface charge density, concentration gradient, temperature, building block integration, and others. Finally, we summarize some representative studies in up-scaled membranes and discuss the main challenges and perspectives of this emerging field.