Mediator-Enabled Electrocatalysis with Ligandless Copper for Anaerobic Chan-Lam Coupling Reactions

Developing oxygen vacancy-rich CuMn2O4/carbon dots dual-function nanozymes via Chan-Lam coupling reaction for the colorimetric/fluorescent determination of D-penicillamine

Defect engineering is a promising approach to construct high performance nanozymes due to its ability to regulate their physical and chemical properties. However, how to construct defects to improve the activity of nanozymes remains a challenge. Herein, for the first time, the Chan-Lam coupling reaction is used to construct the oxygen vacancy (OV)-rich CuMn2O4/carbon dots (CDs) (OV-CuMn2O4/CDs) dual-function nanozymes with fluorescent (FL) and oxidase-like properties, via regulating the low-valent metal ions (Cu+ and Mn2+) and Ov contents in the spinel CuMn2O4 and in-situ growth of β-cyclodextrin (β-CD)-derived CDs. Expectedly, relative to CuMn2O4, the OV-CuMn2O4/CDs exhibited 35.8%, 8.5%, and 14.6% rise in the contents of Cu+, Mn2+ and Ov, respectively. Abundant Ov provides more O2 adsorption/activation sites, and the charge transfer between Ov and metal atoms increases the charge density around metal atoms. This produces more low-valent metals (like Cu+ and Mn2+) to promote the electron transfer from metal to O atoms and O-O bond cleavage. Thus, the oxidase-like activity of OV-CuMn2O4/CDs is 4.1 times that of CuMn2O4. Also, the in-situ growth of β-CD-derived carbon dots on CuMn2O4 endows OV-CuMn2O4/CDs selective target recognition. Thus, a sensitive and selective colorimetric and fluorescence dual-mode method was established for determining D-penicillamine (D-PA), with the limit of detection of 0.25 and 0.048 μM, respectively. The method was applied to D-PA determination in real samples. This work demonstrates the Chan-Lam coupling reaction can be used to construct high performance nanozymes for developing dual-mode sensor for the detection of targets.

N-Hydroxyphthalimides as Nitrogen Radical Precursors in the Copper-Catalyzed Radical Cross-Coupling Amination of Arylboronic Acids: Synthesis of Arylamines

A new and practical approach for the synthesis of arylamines via copper-catalyzed radical cross-coupling amination of arylboronic acids has been developed. The key enabling advance in this protocol is the design of N-hydroxyphthalimides as precursors to generate nitrogen-based radical intermediates for cross-coupling with arylboronic acids, providing the corresponding arylamines of a high yield of up to 98%. In addition, the procedure successfully demonstrated remarkable efficiency across a wide range of functional group tolerances. Mechanistic investigations suggested that a nitrogen radical cross-coupling pathway is possible via phosphite-mediated N-O bond scission.

Aminoborate-Catalyzed Reductive Counterreactions for Oxidative Electrosynthetic Transformations

Electrooxidative transformations frequently rely on proton reduction as the terminal electron sink. However, this cathodic counterreaction can be slow in organic solvents and can operate at reducing potentials that are incompatible with catalysts and reagents needed for oxidative reactions. We report aminoborate adducts as redox mediators for proton reduction that operate at mild reducing potentials. This reliable cathodic couple ultimately enables successful oxidative organic transformations, including chlorodeborylation, developed herein, and Cu-catalyzed Chan-Lam coupling, reported previously by our group. Pyridinium borate adducts formed during electrooxidative chlorination of aryl trifluoroborates serve as easily reduced complexes (-1.1 V vs Fc/Fc+) to catalyze proton reduction. Reactions that promote the formation of borate adducts result in high yields, operate at low cell potentials, suppress aryl trifluoroborate decomposition, and mitigate electrode passivation. These studies illustrate the utility of Lewis acid-base complexes in cathodic counterreactions and underscore the importance of developing both anodic and cathodic reactions in electrosynthesis.

Copper and electrocatalytic synergy for the construction of fused quinazolinones with 2-aminobenzaldehydes and cyclic amines

A new copper and electrocatalytic synergy strategy for efficiently constructing fused quinazolinones has been developed. In the presence of cupric acetate and oxygen, aryl ketones and 1,2,3,4-tetrahydroisoquinoline can smoothly participate in this transformation, thus providing a variety of substituted quinazolones in an undivided cell. The reaction shows good functional group tolerance and provides universal quinazolinones at a good yield under mild conditions.

Copper-catalyzed deborodeuteration of arylboronic acids/borates using D2O as the deuterium source

A straightforward copper-catalyzed deborodeuteration of arylboronic acids and borates was achieved, employing the cost-effective deuterium source D2O. This protocol demonstrates wide substrate applicability, exceptional deuterium incorporation efficiency, and favorable tolerance for various functional groups. Therefore, this approach offers a mild option for further applications in valuable deuterium molecule synthesis.

Visible Light Induced B-H Bond Insertion Reaction with Diazo Compounds

A protocol induced by visible light for the direct insertion of α-carbonyl carbenes into the B-H bond of amine-borane adducts has been developed under conditions that are free of metal and photocatalyst. This approach provides a straightforward route to various organoboron compounds from diazo compounds and amine-borane adducts with moderate to good yields. Mechanistic investigations reveal that this photoinduced reaction proceeds through concerted carbene insertion into the B-H bond, and the photoinduced generation of free carbene from α-diazo esters may be the rate-determining step.

Single-Atom Iron Catalyst as an Advanced Redox Mediator for Anodic Oxidation of Organic Electrosynthesis

Homogeneous electrocatalysts can indirect oxidate the high overpotential substrates through single-electron transfer on the electrode surface, enabling efficient operation of organic electrosynthesis catalytic cycles. However, the problems of this chemistry still exist such as high dosage, difficult recovery, and low catalytic efficiency. Single-atom catalysts (SACs) exhibit high atom utilization and excellent catalytic activity, hold great promise in addressing the limitations of homogeneous catalysts. In view of this, we have employed Fe-SA@NC as an advanced redox mediator to try to change this situation. Fe-SA@NC was synthesized using an encapsulation-pyrolysis method, and it demonstrated remarkable performance as a redox mediator in a range of reported organic electrosynthesis reactions, and enabling the construction of various C-C/C-X bonds. Moreover, Fe-SA@NC demonstrated a great potential in exploring new synthetic method for organic electrosynthesis. We employed it to develop a new electro-oxidative ring-opening transformation of cyclopropyl amides. In this new reaction system, Fe-SA@NC showed good tolerance to drug molecules with complex structures, as well as enabling flow electrochemical syntheses and gram-scale transformations. This work highlights the great potential of SACs in organic electrosynthesis, thereby opening a new avenue in synthetic chemistry.

Comprehensive Comparisons between Directing and Alternating Current Electrolysis in Organic Synthesis

Organic electrosynthesis has consistently aroused significant interest within both academic and industrial spheres. Despite the considerable progress achieved in this field, the majority of electrochemical transformations have been conducted through the utilization of direct-current (DC) electricity. In contrast, the application of alternating current (AC), characterized by its polarity-alternating nature, remains in its infancy within the sphere of organic synthesis, primarily due to the absence of a comprehensive theoretical framework. This minireview offers an overview of recent advancements in AC-driven organic transformations and seeks to elucidate the differences between DC and AC electrolytic methodologies by probing into their underlying physical principles. These differences encompass the ability of AC to preclude the deposition of metal catalysts, the precision in modulating oxidation and reduction intensities, and the mitigation of mass transfer processes.

Direct alkylation of quinoxalinones with electron-deficient alkenes enabled by a sequential paired electrolysis

The metal-free alkylation of N-heterocycles with alkenes has remained a synthetic challenge. We report here the successful implementation of metal-free alkylation of quinoxalinones with electron-deficient alkenes enabled by a sequential paired electrolysis. This protocol provides a mechanistically distinct approach to prepare a variety of C-3 alkylated quinoxalinones that are otherwise quite difficult to synthesize by other means.

Overcoming the Potential Window-Limited Functional Group Compatibility by Alternating Current Electrolysis

The functional group compatibility of an electrosynthetic method is typically limited by its potential reaction window. Here, we report that alternating current (AC) electrolysis can overcome such potential window-limited functional group compatibility. Using alkene heterodifunctionalization as a model system, we design and demonstrate a series of AC-driven reactions that add two functional groups sequentially and separately under the cathodic and anodic pulses, including chloro- and bromotrilfuoromethylation as well as chlorosulfonylation. We discovered that the oscillating redox environment during AC electrolysis allows the regeneration of the redox-active functional groups after their oxidation or reduction in the preceding step. As a result, even though redox labile functional groups such as pyrrole, quinone, and aryl thioether fall in the reaction potential window, they are tolerated under AC electrolysis conditions, leading to synthetically useful yields. The cyclic voltammetric study has confirmed that the product yield is limited by the extent of starting material regeneration during the redox cycling. Our findings open a new avenue for improving functional group compatibility in electrosynthesis and show the possibility of predicting the product yield under AC electrolysis from voltammogram features.

Aqueous pulsed electrochemistry promotes C-N bond formation via a one-pot cascade approach

Electrocatalytic C - N bond formation from inorganic nitrogen wastes is an emerging sustainable method for synthesizing organic amines but is limited in reaction scope. Integrating heterogeneous and homogeneous catalysis for one-pot reactions to construct C - N bonds is highly desirable. Herein, we report an aqueous pulsed electrochemistry-mediated transformation of nitrite and arylboronic acids to arylamines with high yields. The overall process involves nitrite electroreduction to ammonia over a Cu nanocoral cathode and subsequent coupling of NH3 with arylboronic acids catalyzed by in situ dissolved Cu(II) under a switched anodic potential. This pulsed protocol also promotes the migration of nucleophilic ArB(OH)3- and causes the consumption of OH- near the cathode surface, accelerating C - N formation and suppressing phenol byproducts. Cu(II) can be recycled via facile electroplating. The wide substrate scope, ready synthesis of 15N-labelled arylamines, and methodological expansion to cycloaddition and Click reactions highlight the great promise.

Direct conversion of lignin to functionalized diaryl ethers via oxidative cross-coupling

Efficient valorization of lignin, a sustainable source of functionalized aromatic products, would reduce dependence on fossil-derived feedstocks. Oxidative depolymerization is frequently applied to lignin to generate phenolic monomers. However, due to the instability of phenolic intermediates, repolymerization and dearylation reactions lead to low selectivity and product yields. Here, a highly efficient strategy to extract the aromatic monomers from lignin affording functionalized diaryl ethers using oxidative cross-coupling reactions is described, which overcomes the limitations of oxidative methods and affords high-value specialty chemicals. Reaction of phenylboronic acids with lignin converts the reactive phenolic intermediates into stable diaryl ether products in near-theoretical maximum yields (92% for beech lignin and 95% for poplar lignin based on the content of β-O-4 linkages). This strategy suppresses side reactions typically encountered in oxidative depolymerization reactions of lignin and provides a new approach for the direct transformation of lignin into valuable functionalized diaryl ethers, including key intermediates in pharmaceutical and natural product synthesis.

Exploiting Coordination Behavior of 7-Azaindole for Mechanistic Investigation of Chan-Lam Coupling and Application to 7-Azaindole Based Pharmacophores

Multiple spectroscopic techniques, along with single-crystal X-ray analysis, have been used to reveal the detailed structural and electronic information on reaction intermediates of a new copper(II)-DBU catalytic system for the N-arylation of 7-Azaindole. The reaction mixture of Chan-Lam cross-coupling yields two dimeric copper(II)-7-azaindole complexes, including one attached with DBU, prior to adding arylboronic acid and are confirmed structurally and spectroscopically. A suitable mechanism has been proposed using the dimeric copper(II) complex as a catalyst for the coupling reactions. The role of DBU as a base and also as an auxiliary ligand in the course of the reaction has been established. The transmetalated monomeric aryl-copper(II) species generated from the dimeric unit is oxidized by another equivalent of copper(II) to yield an aryl-copper(III) intermediate for facile N-arylation, which has been authenticated with UV-vis spectroscopy. The regeneration of the copper(II)-catalyst by aerial oxidation of colorless copper(I) species (generated via reductive elimination and disproportionation step) is confirmed by mass and absorption spectroscopy. Detailed DFT and TD-DFT calculations help to rationalize the proposed reaction intermediates and their corresponding electronic transitions. Moreover, the confirmation of copper(I)-7-azaindole intermediate via HRMS reaffirmed the involvement of Cu(II)/Cu(III)/Cu(I) species in the Chan-Lam type of coupling. A medicinally-important 7-azaindole-based SHP2 inhibitor has been synthesized via sequential arylation.

Redox Mediators in Homogeneous Co-electrocatalysis

Homogeneous electrocatalysis has been well studied over the past several decades for the conversion of small molecules to useful products for green energy applications or as chemical feedstocks. However, in order for these catalyst systems to be used in industrial applications, their activity and stability must be improved. In naturally occurring enzymes, redox equivalents (electrons, often in a concerted manner with protons) are delivered to enzyme active sites by small molecules known as redox mediators (RMs). Inspired by this, co-electrocatalytic systems with homogeneous catalysts and RMs have been developed for the conversion of alcohols, nitrogen, unsaturated organic substrates, oxygen, and carbon dioxide. In these systems, the RMs have been shown to both increase the activity of the catalyst and shift selectivity to more desired products by altering catalytic cycles and/or avoiding high-energy intermediates. However, the area is currently underdeveloped and requires additional fundamental advancements in order to become a more general strategy. Here, we summarize the recent examples of homogeneous co-electrocatalysis and discuss possible future directions for the field.

Copper-Catalyzed Electrochemical C-H Fluorination

We report the systematic development of an electrooxidative methodology that translates stoichiometric C-H fluorination reactivity of an isolable CuIII fluoride complex into a catalytic process. The critical challenges of electrocatalysis with a highly reactive CuIII species were addressed by the judicious selection of electrolyte, F- source, and sacrificial electron acceptor. Catalyst-controlled C-H fluorination occurs with a preference for hydridic C-H bonds with high bond dissociation energies over weaker but less hydridic C-H bonds. The selectivity is driven by an oxidative asynchronous proton-coupled elelctron transfer (PCET) at an electrophilic CuIII-F complex. We further demonstrate that the asynchronicity factor of hydrogen atom transfer η can be used as a guideline to rationalize the selectivity of C-H fluorination.

Electro-Synthesis of Organic Compounds with Heterogeneous Catalysis

Electro-organic synthesis has attracted a lot of attention in pharmaceutical science, medicinal chemistry, and future industrial applications in energy storage and conversion. To date, there has not been a detailed review on electro-organic synthesis with the strategy of heterogeneous catalysis. In this review, the most recent advances in synthesizing value-added chemicals by heterogeneous catalysis are summarized. An overview of electrocatalytic oxidation and reduction processes as well as paired electrocatalysis is provided, and the anodic oxidation of alcohols (monohydric and polyhydric), aldehydes, and amines are discussed. This review also provides in-depth insight into the cathodic reduction of carboxylates, carbon dioxide, CC, C≡C, and reductive coupling reactions. Moreover, the electrocatalytic paired electro-synthesis methods, including parallel paired, sequential divergent paired, and convergent paired electrolysis, are summarized. Additionally, the strategies developed to achieve high electrosynthesis efficiency and the associated challenges are also addressed. It is believed that electro-organic synthesis is a promising direction of organic electrochemistry, offering numerous opportunities to develop new organic reaction methods.

Copper-Catalyzed Reactions of Alkenyl Boronic Esters via Chan-Evans-Lam Coupling/Annulation Cascades: Substrate Selective Synthesis of Dihydroquinazolin-4-ones and Polysubstituted Quinolines

Copper-catalyzed cascade cyclization reactions between alkenyl boronic esters and N-H-based nucleophiles have been established, providing new approaches for one-pot assembly of azacycles. Following the Chan-Evans-Lam C-N couplings, the cyclization processes occur via divergent pathways based on the utilized substrates, affording hydroamination product dihydroquinazolin-4-ones or aromatization product quinolines. Via this one-pot C-N coupling/annulation cascade, the target substituted azacycles can be obtained in moderate to good yields in each case.

Rh(I)-Catalyzed Coupling of Azides with Boronic Acids Under Neutral Conditions

Because of the importance of polyfunctional amines, C-N bond formation is important in synthetic organic chemistry. Here we present a neutral amination reaction using azides as the nitrogen source and arylboronic acids with a rhodium(I) catalyst to afford alkyl-aryl and aryl-aryl secondary amines. Natural products and pharmaceutical derivatives were applied, and gram-scale reactions were performed, which demonstrated the utility. Mechanistic experiments and DFT calculations suggested that the reaction involves a metal-nitrene intermediate.

A Unified Synthetic Strategy to Introduce Heteroatoms via Electrochemical Functionalization of Alkyl Organoboron Reagents

Based on systematic electrochemical analysis, an integrated synthetic platform of C(sp³)-based organoboron compounds was established for the introduction of heteroatoms. The electrochemically mediated bond-forming strategy was shown to be highly effective for the functionalization of sp³-hybridized carbon atoms with significant steric hindrance. Moreover, virtually all the nonmetallic heteroatoms could be utilized as reaction partners using one unified protocol. The observed reactivity stems from the two consecutive single-electron oxidations of the substrate, which eventually generates an extremely reactive carbocation as the key intermediate. The detailed reaction profile could be elucidated through multifaceted electrochemical studies. Ultimately, a new dimension in the activation strategies for organoboron compounds was accomplished through the electrochemically driven reaction development.

Electrochemical Enantioselective Nucleophilic α-C(sp3)-H Alkenylation of 2-Acyl Imidazoles

Merging electrochemistry with asymmetric catalysis promises to provide an environmentally friendly and efficient strategy for the construction of nonracemic chiral molecules. However, in practice, significant challenges arise from the instability or incompatibility of the chiral catalysts under the electrochemical conditions at the interface of electrode and solution. Herein, we report a catalytic asymmetric indirect electrolysis employing the combination of a redox mediator and a chiral-at-rhodium Lewis acid, which achieves a previously elusive enantioselective nucleophilic α-C(sp³)-H alkenylation of ketones. Specifically, 2-acyl imidazoles react with potassium alkenyl trifluoroborates in high yields (up to 94%) and with exceptional enantioselectivities (27 examples with ≥99% ee) without the need for any additional stoichiometric oxidants (overall 40 examples). The new indirect electrosynthesis can be scaled to gram quantities and was applied to the straightforward synthesis of intermediates of the natural product cryptophycin A and a cathepsin K inhibitor.

Light-Promoted Low-Valent-Tungsten-Catalyzed Ambient Temperature Amination of Boronic Acids with Nitroaromatics

Triggering C-N bond formation with nitroaromatics and boronic acids at mild conditions is highly desirable, since most prior works were carried out under harsh conditions and sometimes suffered from poor chemo- or regioselectivity. Herein, a low-valent-tungsten-catalyzed reaction that enables the ambient temperature amination of boronic acids with nitroaromatics is disclosed. With readily available W(CO)₆ as a precatalyst under external-photosensitizer-free conditions, nitroaromatics smoothly undergo C-N coupling reactions with their boronic acid partners, delivering structurally diverse secondary amines in good yields (>50 examples, yields up to 96%). This methodology is both scalable and highly chemoselective and engages both aliphatic and aromatic boronic acid partners. The catalysis is initiated by the deoxygenation of nitroaromatics by a trans-[W(CO)₄(PPh₃)₂] (trans-W, PPh₃ = triphenylphosphine) complex, which forms in situ via ligand replacement.

Advances on the Merger of Electrochemistry and Transition Metal Catalysis for Organic Synthesis

Synthetic organic electrosynthesis has grown in the past few decades by achieving many valuable transformations for synthetic chemists. Although electrocatalysis has been popular for improving selectivity and efficiency in a wide variety of energy-related applications, in the last two decades, there has been much interest in electrocatalysis to develop conceptually novel transformations, selective functionalization, and sustainable reactions. This review discusses recent advances in the combination of electrochemistry and homogeneous transition-metal catalysis for organic synthesis. The enabling transformations, synthetic applications, and mechanistic studies are presented alongside advantages as well as future directions to address the challenges of metal-catalyzed electrosynthesis.

Photons or Electrons? A Critical Comparison of Electrochemistry and Photoredox Catalysis for Organic Synthesis

Redox processes are at the heart of synthetic methods that rely on either electrochemistry or photoredox catalysis, but how do electrochemistry and photoredox catalysis compare? Both approaches provide access to high energy intermediates (e.g., radicals) that enable bond formations not constrained by the rules of ionic or 2 electron (e) mechanisms. Instead, they enable 1e mechanisms capable of bypassing electronic or steric limitations and protecting group requirements, thus enabling synthetic chemists to disconnect molecules in new and different ways. However, while providing access to similar intermediates, electrochemistry and photoredox catalysis differ in several physical chemistry principles. Understanding those differences can be key to designing new transformations and forging new bond disconnections. This review aims to highlight these differences and similarities between electrochemistry and photoredox catalysis by comparing their underlying physical chemistry principles and describing their impact on electrochemical and photochemical methods.

Insertion of ammonia into alkenes to build aromatic N-heterocycles

Ammonia is one of the most abundant and simple nitrogen sources with decent stability and reactivity. Direct insertion of ammonia into a carbon skeleton is an ideal approach to building valuable N-heterocycles for extensive applications with unprecedented atom and step economy. Here, we show an electrochemical dehydrogenative method in which ammonia is inserted directly into alkenes to build aromatic N-heterocycles in a single step without the use of any external oxidant. This new approach achieves 98–99.2% atom economy with hydrogen as the only byproduct. Quinoline and pyridine with diverse substitutions are readily available. In this work, electrochemistry was used to drive a 4-electron oxidation reaction that is hard to access by other protocols, providing a parallel pathway to nitrene chemistry. In a tandem transformation that included three distinct electrochemical processes, the insertion of ammonia further showcased the tremendous potential to manipulate heterocycles derived from Hantzsch ester to diazine via pyridine and pyrrole.

Aromatic heterocycles containing nitrogen are ubiquitous in biologically relevant small molecules. Here the authors show an unorthodox methodology for their synthesis, by inserting the nitrogen atom into a carbon ring, with ammonia in electrochemical conditions.

Ruthenium-catalyzed reaction of diazoquinones with arylamines to synthesize diarylamines

The diarylamine scaffold is common in bioactive molecules. Herein, we report a Ru(ii)-catalyzed C–N cross-coupling reaction of diazoquinones with arylamines, which provides access to a range of functionalized diarylamines in 43–97% yields.

Recent advances in organic electrosynthesis employing transition metal complexes as electrocatalysts

Organic electrosynthesis has been widely used as an environmentally conscious alternative to conventional methods for redox reactions because it utilizes electric current as a traceless redox agent instead of chemical redox agents. Indirect electrolysis employing a redox catalyst has received tremendous attention, since it provides various advantages compared to direct electrolysis. With indirect electrolysis, overpotential of electron transfer can be avoided, which is inherently milder, thus wide functional group tolerance can be achieved. Additionally, chemoselectivity, regioselectivity, and stereoselectivity can be tuned by the redox catalysts used in indirect electrolysis. Furthermore, electrode passivation can be avoided by preventing the formation of polymer films on the electrode surface. Common redox catalysts include N-oxyl radicals, hypervalent iodine species, halides, amines, benzoquinones (such as DDQ and tetrachlorobenzoquinone), and transition metals. In recent years, great progress has been made in the field of indirect organic electrosynthesis using transition metals as redox catalysts for reaction classes including C-H functionalization, radical cyclization, and cross-coupling of aryl halides-each owing to the diverse reactivity and accessible oxidation states of transition metals. Although various reviews of organic electrosynthesis are available, there is a lack of articles that focus on recent research progress in the area of indirect electrolysis using transition metals, which is the impetus for this review.