A Transient Directing Group Strategy Enables Enantioselective Multicomponent Organofluorine Synthesis

Enantioselective Aminosilylation of Alkenes by Palladium/Ming-Phos-Catalyzed Tandem Narasaka-Heck/Silylation Reaction

A Pd-catalyzed enantioselective aminosilylation of alkenes via tandem Aza-Heck/silylation reaction under Pd/Sadphos catalysis is disclosed. A wide array of oxime esters and silicon reagents are tolerated, furnishing the chiral pyrrolines bearing one quaternary or two contiguous stereocenters in good yield with high enantioselectivity. Not only terminal alkenes but also tri-substituented internal alkenes successfully participate in the reaction, delivering vicinal stereocenters in complete diastereoselectivity and high enantioselectivity. DFT study is conducted to probe the reaction pathway and the origin of the enantioselectivity, which revealed that the stereoinduction arises from the weak interaction between the aromatic ring of the substrate fragment and naphthyl group in the ligand.

Unlocking Enantioselectivity: Synergy of 2-Pyridone and Chiral Amino Acids in Pd-Catalyzed β-C(sp3)-H Transformations

Enantioselective C(sp3)-H activation has garnered significant attention in synthetic and computational chemistry. Chiral transient directing groups (TDGs) hold promise for enabling Pd(II)-catalyzed enantioselective C(sp3)-H functionalization. Despite the interest in this strategy, it presents a challenge because the stereogenic center on the chiral TDG is frequently distant from the C-H bond, leading to a mixture of functionalized products. Our computational study on Pd(II)-catalyzed enantioselective β-C(sp3)-H arylation of aliphatic ketone with chiral amino acids provides a sustainable route to synthesizing complex chiral molecular scaffolds. The cooperative action of 2-pyridone derivatives and chiral amino acids is crucial in promoting the enantio-discriminating C-H activation, oxidative addition, and reductive elimination steps. Using 5-nitro-2-pyridone as the optimal external ligand demonstrates its ability to achieve the highest level of enantioselection. In contrast, the modeled 3,5-di((trifluoromethyl)sulfonyl)-2-pyridone ligand facilitates the most straightforward C-H activation. This study underscores the pivotal role of the alkyl substituent at the α-position of the amino acid (TDG) in altering enantioselectivity.

Acridine photocatalysis enables tricomponent direct decarboxylative amine construction

Amines are centrally important motifs in medicinal chemistry and biochemistry, and indispensable intermediates and linchpins in organic synthesis. Despite their cross-disciplinary prominence, synthetic access to amine continues to rely on two-electron approaches based on reductions and additions of organometallic reagents, limiting their accessible chemical space and necessitating stepwise preassembly of synthetic precursors. We report herein a homogeneous photocatalytic tricomponent decarboxylative radical-mediated amine construction that enables modular access to α-branched secondary amines directly from the broad and structurally diverse chemical space of carboxylic acids in a tricomponent reaction with aldehydes and aromatic amines. Our studies reveal the key role of acridine photocatalysis acting in concert with copper and Brønsted acid catalytic processes in facilitating the previously inaccessible homogeneous photocatalytic reaction and provide a streamlined segue to a wide range of amines and nonproteinogenic α-amino acids.

Rhodium-Catalyzed Highly Enantioselective Hydroboration of Acyclic Tetrasubstituted Alkenes Directed by an Amide

Although progress has been made in enantioselective hydroboration of di- and trisubstituted alkenes over the past decades, enantioselective hydroboration of tetrasubstituted alkenes with high diastereo- and enantioselectivities continues as an unmet challenge since the 1950s due to its extremely low reactivity and the difficulties to simultaneously control the regio- and stereoselectivity of a tetrasubstituted alkene. Here, we report highly regio-, diastereo-, and enantioselective catalytic hydroboration of diverse acyclic tetrasubstituted alkenes. The delicate interplay of an electron-rich rhodium complex and coordination-assistance forms a highly adaptive catalyst that effectively overcomes the low reactivity and controls the stereoselectivity. The generality of the catalyst system is exemplified by its efficacy across various tetrasubstituted alkenes with diverse steric and electronic properties.

Palladium-Catalyzed Carbohalogenation of Olefins with Alkynyl Oxime Ethers: Rapid Access to Chlorine-Containing Isoxazoles

A palladium-catalyzed carbohalogenation of olefins with alkynyl oxime ethers has been described, which provides efficient and practical access to various chlorine-containing isoxazoles. This method exhibits excellent regioselectivity, good functional group compatibility, and mild reaction conditions. The mechanistic studies suggest that the reaction proceeds via a stabilized π-benzyl palladium intermediate, which is essential for the formation of C(sp3)-Cl bonds.

When is an Imine Directing Group a Transient Imine Directing Group in C-H Functionalization?

'Transient' C-H functionalization has emerged in recent years to describe the use of a dynamic linkage, often an imine, to direct cyclometallation and subsequent functionalization. As the field continues to grow in popularity, we consider the features that make an imine directing group transient. A transient imine should be i) formed dynamically in situ, ii) avoid discrete introduction or cleavage steps, and iii) offer the potential for catalysis in both the directing group and metal. This concept article contrasts transient imines with pioneering early studies of imines as directing groups for the formation of metallacycles and the use of preformed imines in C-H functionalization. Leading developments in the use of catalytic additives to form transient directing groups (as aldehyde or amine) are covered including selected highlights of the most recent examples of catalytic imine directed C-H functionalization with transition metals.

Catalytic 1,1-diazidation of alkenes

Compared to well-developed catalytic 1,2-diazidation of alkenes to produce vicinal diazides, the corresponding catalytic 1,1-diazidation of alkenes to yield geminal diazides has not been realized. Here we report an efficient approach for catalytic 1,1-diazidation of alkenes by redox-active selenium catalysis. Under mild conditions, electron-rich aryl alkenes with Z or E or Z/E mixed configuration can undergo migratory 1,1-diazidation to give a series of functionalized monoalkyl or dialkyl geminal diazides that are difficult to access by other methods. The method is also effective for the construction of polydiazides. The formed diazides are relatively safe by TGA-DSC analysis and impact sensitivity tests, and can be easily converted into various valuable molecules. In addition, interesting reactivity that geminal diazides give valuable molecules via the geminal diazidomethyl moiety as a formal leaving group in the presence of Lewis acid is disclosed. Mechanistic studies revealed that a selenenylation-deselenenylation followed by 1,2-aryl migration process is involved in the reactions, which provides a basis for the design of new reactions.

Nickel-Catalyzed Hydrofluorination in Unactivated Alkenes: Regio- and Enantioselective C-F Bond Formation

Catalytic formation of a regio- and enantioselective C-F bond chiral center from readily available alkenes is a crucial goal, yet it continues to pose significant challenges in organic synthesis. Here, we report the regioselective formation of C-F bonds facilitated by NiH catalysis and a coordination directing strategy that enables precise hydrofluorination of both terminal and internal alkenes. Notably, we have optimized this methodology to achieve high enantioselectivity in creating aliphatic C-F stereogenic centers especially with β,γ-alkenyl substrates, using a tailored chiral Bn-BOx ligand. Another pivotal finding in our research is the identification of the (+)-nonlinear effect under optimized conditions, allowing for high enantioselectivity even with moderately enantiomerically enriched chiral ligands. Given the significant role of fluorine in pharmaceuticals and synthetic materials, this research offers essential insights into the regioselective and enantioselective formation of C-F bond chiral centers, paving the way for the efficient production of valuable fluorinated compounds.

BF3-Promoted Ring Expansion of Iminylphosphiranes and Acylphosphiranes for Divergent Access to 1,2-Azaphospholidines and 1,2-Dihydrophosphetes

Ring expansion of strained small rings provides an efficient method for the synthesis of various high-value carbocycles and heterocycles. Here we report BF3·Et2O as both an activating reagent and fluorine source, enabling ring expansion of phosphirane and P-F bond formation. Treatment of 1-iminylphosphirane complexes with BF3·Et2O resulted in 1,2-azaphospholidines, while the reaction of 1-acylphosphirane complexes with BF3·Et2O afforded 1,2-dihydrophosphetes. The reaction path was tuned by the nucleophilicity of the N and O atoms toward the intermediate phosphenium cation.

Multi-substituted trifluoromethyl alkene construction via gold-catalyzed fluoroarylation of gem-difluoroallenes

An unprecedented fluoroarylation of 1,1-difluoroallenes with a cost-effective nucleophilic fluoride reagent and aryldiazonium salts is reported. This visible light promoted gold-catalyzed reaction allows a stereo- and regioselective incorporation of both the fluorine atom and aryl group, enabling a straightforward construction of multi-substituted trifluoromethyl alkenes. Under the mild reaction conditions, a nice tolerance of diverse functional groups is achieved. The high regioselectivity for fluorine-incorporation is rationalized by considering the thermodynamic driving force of trifluoromethyl group formation, whereas the counterintuitive stereoselectivity that aryl is installed on the side of the bulkier γ-substituent is interpreted by alleviating the increasing 1,3-allylic interaction in the gold-coordinated allene intermediate en route to the product.

Chemoselective Three-Component Geminal Cross Couplings of Dihaloalkanes with Cr Catalysis: Rapid Access to Tertiary and Quaternary Alkanes via a Metal-Carbene Intermediate

Geminal cross couplings using multiple components enable the formation of several different bonds at one site in the building of tertiary and quaternary alkanes. Nevertheless, there are remaining issues of concern-cleavage of two geminal bonds and control of selectivity present challenges. We report here the geminal cross couplings of three components by reactions of dihaloalkanes with organomagnesium and chlorosilanes or alkyl tosylates by Cr catalysis, affording the formation of geminal C-C/C-Si or C-C/C-C bonds in the creation of tertiary and quaternary alkanes. The geminal couplings are catalyzed by low-cost CrCl2 , enabling the sluggishness of competitive Kumada-type side couplings and homocouplings of Grignard reagents, in achieving high chemoselectivity. Experimental and theoretical studies indicate that two geminal C-halide bonds are continuously cleaved by Cr to afford a metal carbene intermediate, which couples with a Grignard reagent, followed by silylation, in the formation of geminal C-C and C-Si bonds via a novel inner-sphere radical coupling mechanism. These three-component geminal cross couplings are value-addition to the synthesis of commercial drugs and bioactive molecules in medicinal chemistry.

Enantioselective Hydroalkenylation and Hydroalkynylation of Alkenes Enabled by a Transient Directing Group: Catalyst Generality through Rigidification

The catalytic enantioselective synthesis of α-chiral alkenes and alkynes represents a powerful strategy for rapid generation of molecular complexity. Herein, we report a transient directing group (TDG) strategy to facilitate site-selective palladium-catalyzed reductive Heck-type hydroalkenylation and hydroalkynylation of alkenylaldehyes using alkenyl and alkynyl bromides, respectively, allowing for construction of a stereocenter at the δ-position with respect to the aldehyde. Computational studies reveal the dual beneficial roles of rigid TDGs, such as L-tert-leucine, in promoting TDG binding and inducing high levels of enantioselectivity in alkene insertion with a variety of migrating groups.

A three component 1,3-difunctionalization of vinyl diazo esters enabled by a cobalt catalyzed C-H activation/carbene migratory insertion

We report herein, a modular, regioselective 1,3-oxyarylation of vinyl diazo esters via a Co-catalyzed C-H activation/carbene migratory insertion cascade. The transformation involves the formation of C-C and C-O bonds in a one-pot fashion and displays a broad substrate scope with respect to both, vinyl diazo esters as well as benzamides. The coupled products were subjected to hydrogenation to access elusive allyl alcohol scaffolds. Mechanistic investigations reveal interesting insights on the mode of transformation, involving C-H activation, carbene migratory insertion of the diazo compound followed by a radical addition as the key steps of the transformation.

Functionality-Directed Regio- and Enantio-Selective Olefinic C-H Functionalization of Aryl Alkenes

Aryl alkenes represents one of the most widely occurring structural motif in countless drugs and natural products, and direct C-H functionalization of aryl alkenes provides atom- step efficient access toward valuable analogues. Among them, group-directed selective olefinic α- and β-C-H functionalization, bearing a directing group on the aromatic ring, has attracted remarkable attentions, including alkynylation, alkenylation, amino-carbonylation, cyanation, domino cyclization and so on. These transformations proceed by endo- and exo-C-H cyclometallation and provide aryl alkene derivatives in excellent site- stereo-selectivity. Enantio-selective α- and β- olefinic C-H functionalization were also covered to synthesis axially chiral styrenes.

Asymmetric Fluorofunctionalizations with Carboxylate-Based Phase-Transfer Catalysts

Fluorine is an attractive element in the field of pharmaceutical and agrochemical chemistry due to its unique properties. Considering the chiral environment in nature, where enantiomers often show different biological activities, the introduction of fluorine atom(s) into organic molecules to make chiral fluorinated compounds is an important subject. Herein, we describe the story of the development of our chiral carboxylate-based phase-transfer catalysts and their applications for asymmetric fluorocyclizations of alkenes bearing a carboxylic acid, an amide, and an oxime as an internal nucleophile with a dicationic fluorinating reagent, Selectfluor. We also describe dearomative fluorinations of indole derivatives, 2-naphthols, and resorcinols.

A Sterically Tuned Directing Auxiliary Promotes Catalytic 1,2-Carbofluorination of Alkenyl Carbonyl Compounds

The site-selective palladium-catalyzed three-component coupling of unactivated alkenyl carbonyl compounds, aryl- or alkenylboronic acids, and N-fluorobenzenesulfonimide is described herein. Tuning of the steric environment on the bidentate directing auxiliary enhances regioselectivity and facilitates challenging C(sp³ )-F reductive elimination from a Pd^IV intermediate to afford 1,2-carbofluorination products in moderate to good yields.

Remote Stereocenter through Amide-Directed, Rhodium-Catalyzed Enantioselective Hydroboration of Unactivated Internal Alkenes

Despite the frequent occurrence of γ-branched amines in bioactive molecules, the direct catalytic asymmetric synthesis of this structural motif containing a remote stereocenter remains an important synthetic challenge. Here, we report an amide-directed, rhodium-catalyzed highly diastereo- and enantioselective hydroboration of unactivated internal alkenes. This method provided facile access to enantioenriched amines containing β,γ-vicinal stereocenters. The application of this strategy to the synthesis of bioactive molecules was demonstrated. Computational studies indicated that migratory insertion of the alkene into rhodium hydride controls the enantioselectivity.

PdII -Catalyzed C(alkenyl)-H Activation Facilitated by a Transient Directing Group

Palladium(II)‐catalyzed C(alkenyl)−H alkenylation enabled by a transient directing group (TDG) strategy is described. The dual catalytic process takes advantage of reversible condensation between an alkenyl aldehyde substrate and an amino acid TDG to facilitate coordination of the metal catalyst and subsequent C(alkenyl)−H activation by a tailored carboxylate base. The resulting palladacycle then engages an acceptor alkene, furnishing a 1,3‐diene with high regio‐ and E/Z‐selectivity. The reaction enables the synthesis of enantioenriched atropoisomeric 2‐aryl‐substituted 1,3‐dienes, which have seldom been examined in previous literature. Catalytically relevant alkenyl palladacycles were synthesized and characterized by X‐ray crystallography, and the energy profiles of the C(alkenyl)−H activation step and the stereoinduction model were elucidated by density functional theory (DFT) calculations.

Catalytic alkene skeletal modification for the construction of fluorinated tertiary stereocenters

Herein we describe the first construction of fluorinated tertiary stereocenters based on an alkene C(sp²)–C(sp²) bond cleavage. The new process, that takes advantage of a Rh-catalyzed carbyne transfer, relies on a branched-selective fluorination of tertiary allyl cations and is distinguished by a wide scope including natural products and drug molecule derivatives as well as adaptability to radiofluorination.

We report a previously unknown disconnection approach to valuable fluorinated tertiary stereocenters based on the skeletal modification of 1,1-disubstituted alkenes by a Rh-catalyzed carbyne transfer.

RhIII-Catalyzed heteroarylation of N-2,6-difluorophenyl arylamides with heteroaryl boronate esters

An efficient strategy to aryl-heteroaryl formation via RhIII-catalyzed C–H heteroarylation of arenes with N-heterocyclic boronates has been disclosed.

Nickel(0)-catalysed linear-selective hydroarylation of 2-aminostyrenes with arylboronic acids by a bifunctional temporary directing group strategy

We report a nickel(0)-catalyzed linear-selective hydroarylation of 2-aminostyrenes with arylboronic acids using a bifunctional temporary directing group strategy. In the presence of a catalytic amount of commercially available 3,5-dibromosalicylaldehyde, an...

The synthesis of aryl-heteroaryl derivatives via the RhIII-catalyzed heteroarylation of arenes and heteroaromatic boronates

An efficient Rh^III-catalyzed strategy for constructing aryl-heteroaryl derivatives with removable ketoxime ether auxiliaries via direct C-H heteroarylation based on arenes and heteroaromatic boronates has been disclosed. This protocol could tolerate various pyridine, pyrimidine, pyrazole, thiophene, and furan heteroaromatic boronates well, providing the desired products with high reactivities and excellent regioselectivity. The easy synthetic accessibility may offer potential for application in the synthesis of heterocyclic drug molecules containing aryl-heteroaryl motifs.

Acceleration by double activation catalysis and its negation with rising temperature in hydrolysis of cellobiose with phthalic and hydrochloric acids

Double activation catalysis was experimentally observed in hydrolysis of cellobiose catalyzed simultaneously with phthalic and hydrochloric acids, confirming earlier theoretical prediction known from literature. Both acids can catalyze the reaction individually, and contribution of the double-activation pathway to the total reaction rate declines as temperature increases. In fact, above a certain temperature, the hydrolysis rate in presence of both acids becomes lower than the sum of the rates for the two acids acting individually. A kinetic model is proposed to explain this transition between double-activated catalysis and inhibition. The trend of declining contribution of cooperative catalytic pathway with rising temperature is theorized to be generally applicable for any reaction with a pathway involving simultaneous action of two catalysts when either of them can individually catalyze the reaction.

Transient Directing Groups in Metal-Organic Cooperative Catalysis

The direct functionalization of C-H bonds is among the most fundamental chemical transformations in organic synthesis. However, when the innate reactivity of the substrate cannot be utilized for the functionalization of a given single C-H bond, this selective C-H bond functionalization mostly relies on the use of directing groups that allow bringing the catalyst in close proximity to the C-H bond to be activated and these directing groups need to be installed before and cleaved after the transformation, which involves two additional undesired synthetic operations. These additional steps dramatically reduce the overall impact and the attractiveness of C-H bond functionalization techniques since classical approaches based on substrate pre-functionalization are sometimes still more straightforward and appealing. During the past decade, a different approach involving both the in situ installation and removal of the directing group, which can then often be used in a catalytic manner, has emerged: the transient directing group strategy. In addition to its innovative character, this strategy has brought C-H bond functionalization to an unprecedented level of usefulness and has enabled the development of remarkably efficient processes for the direct and selective introduction of functional groups onto both aromatic and aliphatic substrates. The processes unlocked by the development of these transient directing groups will be comprehensively overviewed in this review article.