Large, Tunable, and Reversible pH Changes by Merocyanine Photoacids

Real-Time Monitoring of Photoinduced pH Jumps by In Situ Rapid-Scan EPR Spectroscopy

This work represents the first demonstration of monitoring kinetics upon a light-induced pH jump by in situ rapid-scan (RS) electron paramagnetic resonance (EPR) spectroscopy on the millisecond time scale. Here, we focus on the protonation state of an imidazolidine type radical as a pH sensor under visible light irradiation of a merocyanine photoacid in bulk solution. The results highlight the utility of photoacids in combination with pH-sensitive spin probes as an effective tool for the real-time investigation of biochemical mechanisms regulated by changes in the pH value.

Wavelength-Dependent Activation of Photoacids and Bases

Photoacids and bases allow remote control over pH in reaction solutions, which is of fundamental importance to an array of applications. Herein, we determine the wavelength-by-wavelength resolved photoreactivity of triarylsulfonium hexafluorophosphate salts as a representative photoacid generator and p-(benzoyl)benzyl triethylammonium tetraphenylborate as a photobase generator, constructing a wavelength-resolved photochemical action plot for each of the compounds. We monitor the pH change of the solution on-line within the cavity of the laser vial and demonstrate a marked mismatch between the absorption spectrum of the photoacid and base with the photochemical action plot, unveiling reactivity at very low absorptivities. Our findings are of critical importance for the use of photoacids and bases, unambiguously demonstrating that absorption is no guide to chemical reactivity with critical consequences for the wavelength employed in applications of photoacids and bases.

An ultrawide-range photochromic molecular fluorescence emitter

Photocontrollable luminescent molecular switches capable of changing emitting color have been regarded as the ideal integration between intelligent and luminescent materials. A remaining challenge is to combine good luminescence properties with wide range of wavelength transformation, especially when confined in a single molecular system that forms well-defined nanostructures. Here, we report a π-expanded photochromic molecular photoswitch, which allows for the comprehensive achievements including wide emission wavelength variation (240 nm wide, 400-640 nm), high photoisomerization extent (95%), and pure emission color (<100 nm of full width at half maximum). We take the advantageous mechanism of modulating self-assembly and intramolecular charge transfer in the synthesis and construction, and further realize the full color emission by simple photocontrol. Based on this, both photoactivated anti-counterfeiting function and self-erasing photowriting films are achieved of fluorescence. This work will provide insight into the design of intelligent optical materials.

Reversibly Tuning the Viscosity of Peptide-Based Solutions Using Visible Light

Light can be used to design stimuli-responsive systems. We induce transient changes in the assembly of a low molecular weight gelator solution using a merocyanine photoacid. Through our approach, reversible viscosity changes can be achieved via irradiation, delivering systems where flow can be controlled non-invasively on demand.

Spiropyran-Based Photoisomerizable α-Amino Acid for Membrane-Active Peptide Modification

Photoisomerizable peptides are promising drug candidates in photopharmacology. While azobenzene- and diarylethene-containing photoisomerizable peptides have already demonstrated their potential in this regard, reports on the use of spiropyrans to photoregulate bioactive peptides are still scarce. This work focuses on the design and synthesis of a spiropyran-derived amino acid, (S)-2-amino-3-(6'-methoxy-1',3',3'-trimethylspiro-[2H-1-benzopyran-2,2'-indolin-6-yl])propanoic acid, which is suitable for the preparation of photoisomerizable peptides. The utility of this amino acid is demonstrated by incorporating it into the backbone of BP100, a known membrane-active peptide, and by examining the photoregulation of the membrane perturbation by the spiropyran-containing peptides. The toxicity of the peptides (against the plant cell line BY-2), their bacteriotoxicity (E. coli), and actin-auxin oscillator modulation ability were shown to be significantly dependent on the photoisomeric state of the spiropyran unit.

Control of giant vesicle assemblies by stimuli-responsive lipids

We describe a bottom-up synthesis of giant vesicles (GVs) utilizing an artificial stimuli-responsive diazobenzene lipid building block. Controlled by light, the GVs can exhibit dynamic behaviors, including reversible formation, the generation of highly multilamellar assemblies, and vesicle capturing and releasing events.

Dynamic Manipulation of Droplets on Liquid-Infused Surfaces Using Photoresponsive Surfactant

Fast and programmable transport of droplets on a substrate is desirable in microfluidic, thermal, biomedical, and energy devices. Photoresponsive surfactants are promising candidates to manipulate droplet motion due to their ability to modify interfacial tension and generate "photo-Marangoni" flow under light stimuli. Previous works have demonstrated photo-Marangoni droplet migration in liquid media; however, migration on other substrates, including solid and liquid-infused surfaces (LIS), remains an outstanding challenge. Moreover, models of photo-Marangoni migration are still needed to identify optimal photoswitches and assess the feasibility of new applications. In this work, we demonstrate 2D droplet motion on liquid surfaces and on LIS, as well as rectilinear motion in solid capillary tubes. We synthesize photoswitches based on spiropyran and merocyanine, capable of tension changes of up to 5.5 mN/m across time scales as short as 1.7 s. A millimeter-sized droplet migrates at up to 5.5 mm/s on a liquid, and 0.25 mm/s on LIS. We observe an optimal droplet size for fast migration, which we explain by developing a scaling model. The model also predicts that faster migration is enabled by surfactants that maximize the ratio between the tension change and the photoswitching time. To better understand migration on LIS, we visualize the droplet flow using tracer particles, and we develop corresponding numerical simulations, finding reasonable agreement. The methods and insights demonstrated in this study enable advances for manipulation of droplets for microfluidic, thermal and water harvesting devices.

Light-Responsive Shape- and Color-Changing Block Copolymer Particles with Fast Switching Speed

Polymer particles capable of dynamic shape changes in response to light have received substantial attention in the development of intelligent multifunctional materials. In this study, we develop a light-responsive block copolymer (BCP) particle system that exhibits fast and reversible shape and color transitions. The key molecular design is the integration of spiropyran photoacid (SPPA) molecules into the BCP particle system, which enables fast and dynamic transformations of polystyrene-b-poly(4-vinylpyridine) (PS-b-P4VP) particles in response to light. The SPPA photoisomerization, induced by 420 nm light irradiation, lowers the pH of the aqueous surroundings from 5.5 to 3.3. The protonated P4VP block substantially increases in domain size from 14 to 39 nm, resulting in significant elongation of the BCP particles (i.e., an increase in the aspect ratio (AR) of the particles from 1.8 to 3.4). Moreover, SPPA adsorbed onto the P4VP surface induces significant changes in the luminescent properties of the BCP particles via photoisomerization of SPPA. Notably, the BCP particles undergo fast, dynamic shape and color transitions within a period of 10 min, maintaining high reversibility over multiple light exposures. Functional dyes are selectively incorporated into different domains of the light-responsive BCP particles to achieve different ranges of color responses. Thus, this study showcases a light-responsive hydrogel display capable of reversible and multicolor photopatterning.

Incorporating Photoresponses into Porous Liquids

Porous liquids combine the properties of a porous solid with those of a liquid, creating a porous flowable media. Since their discovery, these materials have gathered widespread interest within the scientific community, with substantial numbers of new systems being discovered, often with a focus on increasing the pore volume and gas capacity. Which begs the question, what does the future hold for porous liquids? Recently, the first examples of photoresponsive porous liquids have emerged, allowing changes in porosity to be observed under UV irradiation. Here, we expand on our previous report of photoresponsive porous liquids and explore the conceptualisation of responsive porous liquids and how these materials could be developed with the ability to respond to light, thereby offering a potential mechanism of controllable uptake and release in these systems. This concept article summarises different approaches that could be used to incorporate a photoresponse in a porous liquid before discussing recently reported systems, alongside important factors to consider in their design. Finally, by taking inspiration from the methods used to translate porous solids into the liquid state, combined with the field of photoresponsive materials, we discuss potential strategies that could be employed to realise further examples of photoresponsive porous liquids.

Towards Energy-Efficient Direct Air Capture with Photochemically-Driven CO2 Release and Solvent Regeneration

The intensive energy demands associated with solvent regeneration and CO2 release in current direct air capture (DAC) technologies makes their deployment at the massive scales (GtCO2/year) required to positively impact the climate economically unfeasible. This challenge underscores the critical need to develop new DAC processes with significantly reduced energy costs. Recently, we developed a new approach to photochemically drive efficient release of CO2 through an intermolecular proton transfer reaction by exploiting the unique properties of an indazole metastable-state photoacid (mPAH), opening a new avenue towards energy efficient on-demand CO2 release and solvent regeneration using abundant solar energy instead of heat. In this Concept Article, we will describe the principle of our photochemically-driven CO2 release approach for solvent-based DAC systems, discuss the essential prerequisites and conditions to realize this cyclable CO2 release chemistry under ambient conditions. We outline the key findings of our approach, discuss the latest developments from other research laboratories, detail approaches used to monitor DAC systems in situ, and highlight experimental procedures for validating its feasibility. We conclude with a summary and outlook into the immediate challenges that must be addressed in order to fully exploit this novel photochemically-driven approach to DAC solvent regeneration.

Towards predictive control of reversible nanoparticle assembly with solid-binding proteins

Although a broad range of ligand-functionalized nanoparticles and physico-chemical triggers have been exploited to create stimuli-responsive colloidal systems, little attention has been paid to the reversible assembly of unmodified nanoparticles with non-covalently bound proteins. Previously, we reported that a derivative of green fluorescent protein engineered with oppositely located silica-binding peptides mediates the repeated assembly and disassembly of 10-nm silica nanoparticles when pH is toggled between 7.5 and 8.5. We captured the subtle interplay between interparticle electrostatic repulsion and their protein-mediated short-range attraction with a multiscale model energetically benchmarked to collective system behavior captured by scattering experiments. Here, we show that both solution conditions (pH and ionic strength) and protein engineering (sequence and position of engineered silica-binding peptides) provide pathways for reversible control over growth and fragmentation, leading to clusters ranging in size from 25 nm protein-coated particles to micrometer-size aggregate. We further find that the higher electrolyte environment associated with successive cycles of base addition eventually eliminates reversibility. Our model accurately predicts these multiple length scales phenomena. The underpinning concepts provide design principles for the dynamic control of other protein- and particle-based nanocomposites.

Light-Triggered Reversible Change in the Electronic Structure of MoO3 Nanosheets via an Excited-State Proton Transfer Mechanism

Light is an attractive source of energy for regulating stimulus-responsive chemical systems. Here, we use light as a gating source to control the redox state, the localized surface plasmonic resonance (LSPR) peak, and the structure of molybdenum oxide (MoO3) nanosheets, which are important for various applications. However, the light excitation is not that of the MoO3 nanosheets but rather that of pyranine (HPTS) photoacids, which in turn undergo an excited-state proton transfer (ESPT) process. We show that the ESPT process from HPTS to the nanosheets and the intercalation of protons within the MoO3 nanosheets trigger the reduction of the nanosheets and the broadening of the LSPR peak, a process that is reversible, meaning that in the absence of light, the LSPR peak diminishes and the nanosheets return to their oxidized form. We further show that this reversible process is accompanied by a change in the nanosheet size and morphology.

Solvation-Tuned Photoacid as a Stable Light-Driven pH Switch for CO2 Capture and Release

Photoacids are organic molecules that release protons under illumination, providing spatiotemporal control of the pH. Such light-driven pH switches offer the ability to cyclically alter the pH of the medium and are highly attractive for a wide variety of applications, including CO2 capture. Although photoacids such as protonated merocyanine can enable fully reversible pH cycling in water, they have a limited chemical stability against hydrolysis (<24 h). Moreover, these photoacids have low solubility, which limits the pH-switching ability in a buffered solution such as dissolved CO2. In this work, we introduce a simple pathway to dramatically increase stability and solubility of photoacids by tuning their solvation environment in binary solvent mixtures. We show that a preferential solvation of merocyanine by aprotic solvent molecules results in a 60% increase in pH modulation magnitude when compared to the behavior in pure water and can withstand stable cycling for >350 h. Our results suggest that a very high stability of merocyanine photoacids can be achieved in the right solvent mixtures, offering a way to bypass complex structural modifications of photoacid molecules and serving as the key milestone toward their application in a photodriven CO2 capture process.

New Triphenylphosphonium Salts of Spiropyrans: Synthesis and Photochromic Properties

The most important area of modern pharmacology is the targeted delivery of drugs, and one of the most promising classes of chemical compounds for creating drugs of this kind are the photochromic spiropyrans, capable of light-controlled biological activity. This work is devoted to the synthesis and study of the photochromic properties of new triphenylphosphonium salts of spiropyrans. It was found that all the synthesized cationic spiropyrans have high photosensitivity, increased resistance to photodegradation and the ability for photoluminescence.

Construction of Multi-Stimuli Responsive Highly Porous Switchable Frameworks by In Situ Solid-State Generation of Spiropyran Switches

Stimuli-responsive molecular systems support within permanently porous materials offer the opportunity to host dynamic functions in multifunctional smart materials. However, the construction of highly porous frameworks featuring external-stimuli responsiveness, for example by light excitation, is still in its infancy. Here a general strategy is presented to construct spiropyran-functionalized highly porous switchable aromatic frameworks by modular and high-precision anchoring of molecular hooks and an innovative in situ solid-state grafting approach. Three spiropyran-grafted frameworks bearing distinct functional groups exhibiting various stimuli-responsiveness are generated by two-step post-solid-state synthesis of a parent indole-based material. The quantitative transformation and preservation of high porosity are demonstrated by spectroscopic and gas adsorption techniques. For the first time, a highly efficient strategy is provided to construct multi-stimuli-responsive, yet structurally robust, spiropyran materials with high pore capacity which is proved essential for the reversible and quantitative isomerization in the bulk as demonstrated by solid-state NMR spectroscopy. The overall strategy allows to construct dynamic materials that undergoes reversible transformation of spiropyran to zwitterionic merocyanine, by chemical and physical stimulation, showing potential for pH active control, responsive gas uptake and release, contaminant removal, and water harvesting.

Light-Activated Assembly of DNA Origami into Dissipative Fibrils

Hierarchical DNA nanostructures offer programmable functions at scale, but making these structures dynamic, while keeping individual components intact, is challenging. Here we show that the DNA A-motif-protonated, self-complementary poly(adenine) sequences-can propagate DNA origami into one-dimensional, micron-length fibrils. When coupled to a small molecule pH regulator, visible light can activate the hierarchical assembly of our DNA origami into dissipative fibrils. This system is recyclable and does not require DNA modification. By employing a modular and waste-free strategy to assemble and disassemble hierarchical structures built from DNA origami, we offer a facile and accessible route to developing well-defined, dynamic, and large DNA assemblies with temporal control. As a general tool, we envision that coupling the A-motif to cycles of dissipative protonation will allow the transient construction of diverse DNA nanostructures, finding broad applications in dynamic and non-equilibrium nanotechnology.

Reversible CO2 Capture and On-Demand Release by an Acidity-Matched Organic Photoswitch

Separation of carbon dioxide (CO2) from point sources or directly from the atmosphere can contribute crucially to climate change mitigation plans in the coming decades. A fundamental practical limitation for the current strategies is the considerable energy cost required to regenerate the sorbent and release the captured CO2 for storage or utilization. A directly photochemically driven system that demonstrates efficient passive capture and on-demand CO2 release triggered by sunlight as the sole external stimulus would provide an attractive alternative. However, little is known about the thermodynamic requirements for such a process or mechanisms for modulating the stability of CO2-derived dissolved species by using photoinduced metastable states. Here, we show that an organic photoswitchable molecule of precisely tuned effective acidity can repeatedly capture and release a near-stoichiometric quantity of CO2 according to dark-light cycles. The CO2-derived species rests as a solvent-separated ion pair, and key aspects of its excited-state dynamics that regulate the photorelease efficiency are characterized by transient absorption spectroscopy. The thermodynamic and kinetic concepts established herein will serve as guiding principles for the development of viable solar-powered negative emission technologies.

Light-Switchable Biocatalytic Covalent-Organic Framework Nanomotors for Aqueous Contaminants Removal

Self-propelled nanomotors represent a promising class of adaptable and versatile technologies with broad applications in the realms of biomedicine and environmental remediation. Herein, we report a biocatalytic nanomotor based on a covalent-organic framework (COF) that demonstrates intelligent and switchable motion triggered by a blue-to-red light switch. Consequently, when exposed to blue light, the nanomotor significantly enhances the removal of contaminants in aqueous solutions due to its elevated mobility. Conversely, it effectively deactivates its motion and contaminant removal upon exposure to red light. This study explores the heterogeneous assembly strategy of the COF-based nanomotor and its light-controlled propulsion performance and provides a novel strategy for the regulation of movement, offering valuable insights for the design and practical applications of nanomotors.

The impact of aggregation of AIE and ACQ moiety-integrating material on the excited state dynamics

The investigation of the properties of aggregate materials is highly interesting because the process of aggregation can result in the disappearance of original properties and the emergence of new ones. Here, a novel fluorescent material (TPEIP), which synergistically combines aggregation-induced emission (AIE) and aggregation caused quenching (ACQ) moieties, was first synthesized by the cyclization reaction of 2,3-diamino-phenazine with 4-tetraphenylenthenealdehyde. We controlled the degree of aggregation of TPEIP to shed light on the impact of the aggregation on the excited state dynamics. TPEIP aggregation realized control over the Intersystem Crossing (ISC) rates and, in turn, the suppression of triplet excited states in MeOH, EtOH or via the simple addition of water to TPEIP solutions in DMSO. From global target analysis, the time scale was 966.2 ps for ISC for TPEIP in DMSO, but it was 860 ps in the case of TPEIP solutions featuring 5% water. The dynamics of TPEIP excited states undergo significant changes as the degree of aggregation increases. Notably, the lifetime of singlet excited states decreases, and there was a gradual diminishment in triplet states.

Revealing Mitochondrion-Lysosome Dynamic Interactions and pH Variations in Live Cells with a pH-Sensitive Fluorescent Probe

Mitochondrion-lysosome interactions have garnered significant attention in recent research. Numerous studies have shown that mitochondrion-lysosome interactions, including mitochondrion-lysosome contact (MLC) and mitophagy, are involved in various biological processes and pathological conditions. Single fluorescent probes are termed a pivotal chemical tool in unraveling the intricate spatiotemporal interorganelle interplay in live cells. However, current chemical tools are insufficient to deeply understand mitochondrion-lysosome dynamic interactions and related diseases, Moreover, the rational design of mitochondrion-lysosome dual-targeting fluorescent probes is intractable. Herein, we designed and synthesized a pH-sensitive fluorescent probe called INSA, which could simultaneously light up mitochondria (red emission) and lysosomes (green emission) for their internal pH differences. Employing INSA, we successfully recorded long-term dynamic interactions between lysosomes and mitochondria. More importantly, the increasing mitochondrion-lysosome interactions in ferroptotic cells were also revealed by INSA. Further, we observed pH variations in mitochondria and lysosomes during ferroptosis for the first time. In brief, this work not only introduced a pH-sensitive fluorescent probe INSA for the disclosure of the mitochondrion-lysosome dynamic interplays but also pioneered the visualization of the organellar pH alternation in a specific disease model.

Multi-stimulus Room Temperature Phosphorescent Polymers Sensitive to Light and Acid cyclically with Energy Transfer

The stimulus-responsive room temperature phosphorescent (RTP) materials have endowed wide potential applications. In this work, by introducing naphthalene and spiropyran (SP) into polyacrylamide as the energy donor and acceptor respectively, a new kind of brilliant dynamic color-tunable amorphous copolymers were prepared with good stability and processibility, and afterglow emissions from green to orange in response to the stimulus of photo or acid, thanks to multi-responsibility of SP and the energy transfer between naphthalene and SP. In addition to the deeply exploring of the inherent mechanism, these copolymers have been successfully applied in dynamically controllable applications in information protection and delivery.

Spiropyran-based chromic hydrogels for CO2 absorption and detection

By enabling rapid, cost-effective, user-friendly and in situ detection of carbon dioxide, colorimetric CO₂ sensors are of relevance for a variety of fields. However, it still remains a challenge the development of optical chemosensors for CO₂ that combine high sensitivity, selectivity and reusability with facile integration into solid materials. Herein we pursued this goal by preparing hydrogels functionalized with spiropyrans, a well-known class of molecular switches that undergo different color changes upon application of light and acid stimuli. By varying the nature of the substituents of the spiropyran core, different acidochromic responses are obtained in aqueous media that allow discriminating CO₂ from other acid gases (e.g., HCl). Interestingly, this behavior can be transferred to functional solid materials by synthesizing polymerizable spiropyran derivatives, which are used to prepare hydrogels. These materials preserve the acidochromic properties of the incorporated spiropyrans, thus leading to selective, reversible and quantifiable color changes upon exposure to different CO₂ amounts. In addition, CO₂ desorption and, therefore, recovery of the initial state of the chemosensor is favored by irradiation with visible light. This makes spiropyran-based chromic hydrogels promising systems for the colorimetric monitorization of carbon dioxide in a diversity of applications.

Modulating the Lifetime of DNA Motifs Using Visible Light and Small Molecules

Here we regulate the formation of dissipative assemblies built from DNA using a merocyanine photoacid that responds to visible light. The operation of our system and the relative distribution of species within it are controlled by irradiation time, initial pH value, and the concentration of a small-molecule binder that inhibits the reaction cycle. This approach is modular, does not require DNA modification, and can be used for several DNA sequences and lengths. Our system design allows for waste-free control of dissipative DNA nanotechnology, toward the generation of nonequilibrium, life-like nanodevices.

Spiropyran/Merocyanine Amphiphile in Various Solvents: A Joint Experimental–Theoretical Approach to Photophysical Properties and Self-Assembly

This joint experimental-theoretical work focuses on molecular and photophysical properties of the spiropyran-containing amphiphilic molecule in organic and aqueous solutions. Being dissolved in tested organic solvents, the system demonstrates positive photochromism, i.e., upon UV stimulus the colorless spiropyran form is transformed into colorful merocyanine isomer. However, the aqueous solution of the amphiphile possesses a negative photochromism: the orange-red merocyanine form becomes thermodynamically more stable in water, and both UV and vis stimuli lead to the partial or complete photobleaching of the solution. The explanation of this phenomenon is given on the basis of density functional theory calculations and classical modeling including thermodynamic integration. The simulations reveal that stabilization of merocyanine in water proceeds with the energy of ca. 70 kJ mol−1, and that the Helmholtz free energy of hydration of merocyanine form is 100 kJ mol−1 lower as compared to the behavior of SP isomer in water. The explanation of such a difference lies in the molecular properties of the merocyanine: after ring-opening reaction this molecule transforms into a zwitterionic form, as evidenced by the electrostatic potential plotted around the opened form. The presence of three charged groups on the periphery of a flat conjugated backbone stimulates the self-assembly of merocyanine molecules in water, ending up with the formation of elongated associates with stack-like building blocks, as shown in molecular dynamics simulations of the aqueous solution with the concentration above critical micelle concentration. Our quantitative evaluation of the hydrophilicity switching in spiropyran/merocyanine containing surfactants may prompt the search for new systems, including colloidal and polymeric ones, aiming at remote tuning of their morphology, which could give new promising shapes and patterns for the needs of modern nanotechnology.

Application of Super Photoacids in Controlling Dynamic Processes: Light-Triggering the Self-Propulsion of Oil Droplets

The dynamic control of pH-responsive systems is at the heart of many natural and artificial processes. Here, we use photoacids, molecules that dissociate only in their excited state and transfer their proton to nearby proton acceptors, for the dynamic control of processes. A problem arises when there is a need to protonate highly acidic acceptors. We solve this problem using super photoacids that have an excited-state pK_a of -8, thus enabling them to protonate very weak proton acceptors. The process that we target is the light-triggered self-propulsion of droplets, initiated by an excited-state proton transfer (ESPT) from a super photoacid donor to a surfactant acceptor situated on the surface of the droplet with a pK_a of ∼0. We first confirm using steady-state and time-resolved spectroscopy that a super photoacid can undergo ESPT to the acidic surfactant, whereas a "regular" photoacid cannot. Next, we show self-propulsion of the droplet upon irradiating the solvated super photoacid. We further confirm the protonation of the surfactant on the surface of the droplet using transient surface tension measurements. Our system is the first example of the application of super photoacids to control dynamic processes and opens new possibilities in the field of light-triggered dynamic systems.

Arylazo Sulfones as Nonionic Visible-Light Photoacid Generators

The selective visible-light-driven generation of a weak acid (sulfinic acid, in nitrogen-purged solutions) or a strong acid (sulfonic acid, in oxygen-purged solutions) by using shelf-stable arylazo sulfones was developed. These sulfones were then used for the green, smooth, and efficient photochemical catalytic protection of several (substituted) alcohols (and phenols) as tetrahydropyranyl ethers or acetals.

Basic-to-acidic reversible pH switching with a merocyanine photoacid

The application of merocyanine photoacids has previously been largely limited to neutral and acidic pH values. Here we introduce a new merocyanine photoacid with superior pH switching qualities. By increasing the pK_a in the dark (pKdarka) and the solubility we increased the reversible visible light induced pH jump to 3.5 units. Moreover, it is the first demonstration of a merocyanine photoacid able to generate a significant pH drop from a basic (pH 8.3) to an acidic (pH 5.2) environment.

A light-gated regulation of the reaction site by a cucurbit[7]uril macrocycle

On–off competitive inhibition is presented. Photoswitchable pseudorotaxane controls the rate of self-reaction and product selectivity of external reactions.