High Triplet Energy Iridium(III) Isocyanoborato Complex for Photochemical Upconversion, Photoredox and Energy Transfer Catalysis

Determining Excited-State Absorption Properties of a Quinoid Flavin by Polarization-Resolved Transient Spectroscopy

As important naturally occurring chromophores, photophysical/chemical properties of quinoid flavins have been extensively studied both experimentally and theoretically. However, little is known about the transition dipole moment (TDM) orientation of excited-state absorption transitions of these important compounds. This aspect is of high interest in the fields of photocatalysis and quantum control studies. In this work, we employ polarization-associated spectra (PAS) to study the excited-state absorption transitions and the underlying TDM directions of a standard quinoid flavin compound. As compared to transient absorption anisotropy (TAA), an analysis based on PAS not only avoids diverging signals but also retrieves the relative angle for ESA transitions with respect to known TDM directions. Quantum chemical calculations of excited-state properties lead to good agreement with TA signals measured in magic angle configuration. Only when comparing experiment and theory for TAA spectra and PAS, do we find deviations when and only when the S0 → S1 of flavin is used as a reference. We attribute this to the vibronic coupling of this transition to a dark state. This effect is only observed in the employed polarization-controlled spectroscopy and would have gone unnoticed in conventional TA.

Radical reactions enabled by polyfluoroaryl fragments: photocatalysis and beyond

Polyfluoroarenes have been known for a long time, but they are most often used as fluorinated building blocks for the synthesis of aromatic compounds. At the same time, due to peculiar fluorine effect, they have unique properties that provide applications in various fields ranging from synthesis to materials science. This review summarizes advances in the radical chemistry of polyfluoroarenes, which have become possible mainly with the advent of photocatalysis. Transformations of the fluorinated ring via the C-F bond activation, as well as use of fluoroaryl fragments as activating groups and hydrogen atom transfer agents are discussed. The ability of fluoroarenes to serve as catalysts is also considred.

Harnessing Heavy-Atom Effects in Multiple Resonance Thermally Activated Delayed Fluorescence (MR-TADF) Sensitizers: Unlocking High-Performance Visible-to-Ultraviolet (Vis-to-UV) Triplet Fusion Upconversion

Ultraviolet (UV) light plays a crucial role in various applications, but currently, the efficiency of generating artificial UV light is low. The visible-to-ultraviolet (Vis-to-UV) system based on the triplet-triplet annihilation upconversion (TTA-UC) mechanism can be a viable solution. Metal-free multiple resonance thermally activated delayed fluorescence (MR-TADF) materials are ideal photosensitizers (PSs) apart from the drawback of high photoluminescence quantum yields (PLQYs). Herein, we systematically investigated the impact of the heavy-atom effect (HAE) on the MR-TADF sensitizers. BNCzBr was then synthesized by incorporating a bromine atom into the skeleton of the precursor BNCz. Impressively, the internal HAE (iHAE) leads to a significantly decreased PLQY and a remarkably increased intersystem crossing quantum yield (ΦISC). Consequently, a higher upconversion quantum efficiency of 12.5% was realized. While the external HAE (eHAE) harms the UC performance. This work guides the further development of MR-TADF sensitizers for high-performance Vis-to-UV TTA-UC systems.

Green Light-Triggered Photocatalytic Anticancer Activity of Terpyridine-Based Ru(II) Photocatalysts

The relentless increase in drug resistance of platinum-based chemotherapeutics has opened the scope for other new cancer therapies with novel mechanisms of action (MoA). Recently, photocatalytic cancer therapy, an intrusive catalytic treatment, is receiving significant interest due to its multitargeting cell death mechanism with high selectivity. Here, we report the synthesis and characterization of three photoresponsive Ru(II) complexes, viz., [Ru(ph-tpy)(bpy)Cl]PF6 (Ru1), [Ru(ph-tpy)(phen)Cl]PF6 (Ru2), and [Ru(ph-tpy)(aip)Cl]PF6 (Ru3), where, ph-tpy = 4'-phenyl-2,2':6',2″-terpyridine, bpy = 2,2'-bipyridine, phen = 1,10-phenanthroline, and aip = 2-(anthracen-9-yl)-1H-imidazo[4,5-f][1,10] phenanthroline, showing photocatalytic anticancer activity. The X-ray crystal structures of Ru1 and Ru2 revealed a distorted octahedral geometry with a RuN5Cl core. The complexes showed an intense absorption band in the 440-600 nm range corresponding to the metal-to-ligand charge transfer (MLCT) that was further used to achieve the green light-induced photocatalytic anticancer effect. The mitochondria-targeting photostable complex Ru3 induced phototoxicity with IC50 and PI values of ca. 0.7 μM and 88, respectively, under white light irradiation and ca. 1.9 μM and 35 under green light irradiation against HeLa cells. The complexes (Ru1-Ru3) showed negligible dark cytotoxicity toward normal splenocytes (IC50s > 50 μM). The cell death mechanistic study revealed that Ru3 induced ROS-mediated apoptosis in HeLa cells via mitochondrial depolarization under white or green light exposure. Interestingly, Ru3 also acted as a highly potent catalyst for NADH photo-oxidation under green light. This NADH photo-oxidation process also contributed to the photocytotoxicity of the complexes. Overall, Ru3 presented multitargeting synergistic type I and type II photochemotherapeutic effects.

Combined Nucleophilic and Electrophilic Functionalization to Optimize Blue Phosphorescence in Cyclometalated Platinum Complexes

Ligand-based functionalization strategies have emerged as powerful approaches to tune and optimize blue phosphorescence, which can involve nucleophilic addition to coordinated ligands or electrophilic functionalization via the coordination of exogenous Lewis acids. Whereas both have been used separately to enhance the photophysical properties of organometallic compounds with high-energy triplet states, in this work, we show that these two strategies can be used together on the same platform. Isocyanide-supported cyclometalated platinum compounds undergo nucleophilic addition with diethylamine to form a strong σ-donor acyclic diaminocarbene-supporting ligand. In a subsequent step, a cyanide ancillary ligand is converted into a more strongly π-acidic isocyanoborate via the coordination of a borane Lewis acid. Importantly, both of these ligand-based functionalization steps improve the quantum yields and lifetimes of the blue-phosphorescent complexes. This synergy results in complexes with photoluminescence quantum yields up to 0.40 for deep blue and 0.75 for sky blue regions and PL lifetimes on the order of 10-5 s.

Luminescent and Photoredox-Active Molybdenum(0) Complexes Competitive with Isoelectronic Ruthenium(II) Polypyridines

Ruthenium(II) complexes with chelating polypyridine ligands are among the most frequently investigated compounds in photophysics and photochemistry, owing to their favorable luminescence and photoredox properties. Equally good photoluminescence performance and attractive photocatalytic behavior is now achievable with isoelectronic molybdenum(0) complexes. The zero-valent oxidation state of molybdenum is stabilized by carbonyl or isocyanide ligands, and metal-to-ligand charge transfer (MLCT) excited states analogous to those in ruthenium(II) complexes can be established. Microsecond MLCT excited-state lifetimes and photoluminescence quantum yields up to 0.2 have been achieved in solution at room temperature, and the emission wavelength has become tunable over a large range. The molybdenum(0) complexes are stronger photoreductants than ruthenium(II) polypyridines and can therefore perform more challenging chemical reductions. The triplet nature of their luminescent MLCT states allows sensitization of photon upconversion via triplet-triplet annihilation, to convert low-energy input radiation into higher-energy output fluorescence. This review summarizes the current state of the art concerning luminescent molybdenum(0) complexes and highlights their application potential. Molybdenum is roughly 140 times more abundant and far cheaper than ruthenium, hence this research is relevant in the greater context of finding more sustainable alternatives to using precious and rare transition metals in photophysics and photochemistry.

Nature of ultrafast dynamics in the lowest-lying singlet excited state of [Ru(bpy)3]2

This work presents mechanisms to rationalize the nature of ultrafast photochemical and photophysical processes on the first singlet metal-ligand charge transfer state (1MLCT1) of the [Ru(bpy)3]2+ complex. The 1MLCT1 state is the lowest-lying singlet excited state and the most important intermediate in the early evolution of photoexcited [Ru(bpy)3]2+*. The results obtained from simple but interpretable theoretical models show that the 1MLCT1 state can be very quickly formed via both direct photo-excitation and internal conversions and then can efficiently relax to its equilibrium geometry in ca. 5 fs. The interligand electron transfer (ILET) on the potential energy surface of the 1MLCT1 state is also extremely fast, with a rate constant of ca. 1.38 × 1013 s-1. The ultrafast ILET implies that the excited electron can dynamically delocalize over the three bpy ligands, despite the fact that the excited electron may be localized on either one of the three ligands at the equilibrium geometries of the three symmetric equivalent minima. Since rapid ILET essentially suggests delocalization, the long-standing controversy in inorganic photophysics-whether the excited electron is localized or delocalized-may therefore be calmed down to some extent.

Phenylbenzothiazole-Based Platinum(II) and Diplatinum(II) and (III) Complexes with Pyrazolate Groups: Optical Properties and Photocatalysis

Based on 2-phenylbenzothiazole (pbt) and 2-(4-dimethylaminophenyl)benzothiazole (Me2N-pbt), mononuclear [Pt(pbt)(R'2-pzH)2]PF6 (R'2-pzH = pzH 1a, 3,5-Me2pzH 1b, 3,5-iPr2pzH 1c) and diplatinum (PtII-PtII) [Pt(pbt)(μ-R'2pz)]2 (R'2-pz = pz 2a, 3,5-Me2pz 2b, 3,5-iPr2pz 2c) and [Pt(Me2N-pbt)(μ-pz)]2 (3a) complexes have been prepared. In the presence of sunlight, 2a and 3a evolve, in CHCl3 solution, to form the PtIII-PtIII complexes [Pt(R-pbt)(μ-pz)Cl]2 (R = H 4a, NMe2 5a). Experimental and computational studies reveal the negligible influence of the pyrazole or pyrazolate ligands on the optical properties of 1a-c and 2a,b, which exhibit a typical 3IL/3MLCT emission, whereas in 2c the emission has some 3MMLCT contribution. 3a displays unusual dual, fluorescence (1ILCT or 1MLCT/1LC), and phosphorescence (3ILCT) emissions depending on the excitation wavelength. The phosphorescence is lost in aerated solutions due to sensitization of 3O2 and formation of 1O2, whose determined quantum yield is also wavelength dependent. The phosphorescence can be reversibly photoinduced (365 nm, ∼ 15 min) in oxygenated THF and DMSO solutions. In 4a and 5a, the lowest electronic transitions (S1-S3) have mixed characters (LMMCT/LXCT/L'XCT 4a and LMMCT/LXCT/ILCT 5a) and they are weakly emissive in rigid media. The 1O2 generation property of complex 3a is successfully used for the photooxidation of p-bromothioanisol showing its potential application toward photocatalysis.

Rational design of efficient photosensitizers based on cyclometalated iridium(III) complexes with 2-arylbenzimidazole and aromatic 1,3-diketone ligands

A judicious selection of substituents in cyclometalating 2-arylbenzimidazoles and an ancillary aromatic 1,3-diketone enabled the creation of heteroleptic iridium(III) complexes demonstrating strong light absorption up to 500 nm (ε ≈ 10 000-12 000 M-1 cm-1). The complexes, which were studied by various spectroscopic techniques, single-crystal X-ray diffraction and cyclic voltammetry, displayed tunable absorption maxima depending on the nature of substituents and their positions. The experimental study was corroborated by quantum chemical calculations, which showed an increased contribution of intraligand charge transfer transitions to the visible light absorption in the case of complexes containing electron-withdrawing substituents in the ligands. Despite being of high intensity, some of these transitions are responsible for the formation of the excited states located at large distances from the 'anchoring' fragment incorporated in the ancillary ligand. In turn, incorporation of electron-donating substituents at the para-position to the Ir-C bonds increases the number of excited states located on the ancillary ligand. The destabilization of the HOMO, which is caused by the increase in the electron-donating ability of the substituents in the metalated rings, translated into negative shifts of the Ir4+/Ir3+ redox potential, affecting, in some cases, the degree of electrochemical reversibility of the complexes. Several complexes having strong light-harvesting characteristics and undergoing reversible oxidation in the appropriate potential range were used for coating the TiO2 photoanodes, which reached an efficiency of 2.15% upon irradiation with the standard AM 1.5 spectrum.

Unveiling the intersystem crossing dynamics in N-annulated perylene bisimides

The efficient population of the triplet excited states in heavy metal-free organic chromophores has been one of the long-standing research problems to molecular photochemists. The negligible spin-orbit coupling matrix elements in the purely organic chromophores and the large singlet-triplet energy gap (ΔES-T) pose a hurdle for ultrafast intersystem crossing (ISC). Herein we report the unprecedented population of triplet manifold in a series of nitrogen-annulated perylene bisimide chromophores (NPBI and Br-NPBI). NPBI is found to have a moderate fluorescence quantum yield (Φf = 68 ± 5%), whereas Br-NPBI showcased a low fluorescence quantum yield (Φf = 2.0 ± 0.6%) in toluene. The femtosecond transient absorption measurements of Br-NPBI revealed ultrafast ISC (kISC = 1.97 × 1010 s-1) from the initially populated singlet excited state to the long-lived triplet excited states. The triplet quantum yields (ΦT = 95.2 ± 4.6% for Br-NPBI, ΦT = 18.7 ± 2.3% for NPBI) calculated from nanosecond transient absorption spectroscopy measurements showed the enhancement in triplet population upon bromine substitution. The quantum chemical calculations revealed the explicit role of nitrogen annulation in tuning the excited state energy levels to favor the ISC. The near degeneracy between the singlet and triplet excited states observed in NPBI and Br-NPBI (ΔES-T = -0.01 eV for NPBI, ΔES-T = 0.03 eV for Br-NPBI) facilitates the spin flipping in the molecules. Nitrogen annulation emerges as a design strategy to open up the ISC pathway and the rate of which can be further enhanced by the substitution of a heavier element.

Isoacridone dyes with parallel reactivity from both singlet and triplet excited states for biphotonic catalysis and upconversion

Metal-based photosensitizers commonly undergo quantitative intersystem crossing into photoactive triplet excited states. In contrast, organic photosensitizers often feature weak spin-orbit coupling and low intersystem crossing efficiencies, leading to photoactive singlet excited states. By modifying the well-known acridinium dyes, we obtained a new family of organic photocatalysts, the isoacridones, in which both singlet- and triplet-excited states are simultaneously photoactive. These new isoacridone dyes are synthetically readily accessible and show intersystem crossing efficiencies of up to 52%, forming microsecond-lived triplet excited states (T1), storing approximately 1.9 eV of energy. Their photoactive singlet excited states (S1) populated in parallel have only nanosecond lifetimes, but store ∼0.4 eV more energy and act as strong oxidants. Consequently, the new isoacridone dyes are well suited for applications requiring parallel triplet-triplet energy transfer and photoinduced electron transfer elementary steps, which have become increasingly important in modern photocatalysis. In proof-of-principle experiments, the isoacridone dyes were employed for Birch-type arene reductions and C-C couplings via sensitization-initiated electron transfer, substituting the commonly used iridium or ruthenium based photocatalysts. Further, in combination with a pyrene-based annihilator, sensitized triplet-triplet annihilation upconversion was achieved in an all-organic system, where the upconversion quantum yield correlated with the intersystem crossing quantum yield of the photosensitizer. This work seems relevant in the greater contexts of developing new applications that utilize biphotonic photophysical and photochemical behavior within metal-free systems.

Amplified Triplet Emission of Organic Periphery Groups by Exothermic Triplet-Triplet Energy Transfer from the 3MLCT State of an Core Complex to the 3LC State of Geometrically Confined Carbazole/Naphthyl Tethers

To investigate the excited-state properties of metal-organic bichromophores, including energy transfer mechanisms, a series of new homoleptic N-heterocyclic carbene (NHC)-based iridium(III) complexes were prepared by incorporating a peripheral naphthalene (Np) (Ir(Nppmi)3: fac-/mer-Ir(1-Nppmi)3 and fac-/mer-Ir(2-Nppmi)3) or carbazole (Cz) (Ir(Czpmi)3: fac-/mer-Ir(o-Czpmi)3, fac-/mer-Ir(m-Czpmi)3, and fac-/mer-Ir(p-Czpmi)3) unit to the phenyl moiety of the phenylimidazole (pmi) ligand. Through a series of photophysical analyses and femtosecond time-resolved absorption (fs-TA) spectroscopy, it was discovered that the phosphorescence of the Ir core, (Ir(pmi)3), was considerably quenched, while intense phosphorescence peaks arising from the excited triplet Np (3Np*)/Cz (3Cz*) species were primarily observed at room temperature (r.t.) and low temperature. Such amplified phosphorescence of the tethered organic Np and Cz units originated from triplet-triplet energy transfer (TTET) from the high-lying metal-to-ligand charge transfer (3MLCT) state of the Ir(pmi)3 core to the ligand-centered triplet state (3LC) of the peripheral Np and Cz units. This result indicates that the exothermic intramolecular energy transfer (IET) in the excited triplet state realizes the efficient phosphorescent emission of geometrically confined organic tethers.

Triplet sensitization enables bidirectional isomerization of diazocine with 130 nm redshift in excitation wavelengths

Diazocines are bridged azobenzenes with phenyl rings connected by a CH2-CH2 group. Despite this rather small structural difference, diazocine exhibits improved properties over azobenzene as a photoswitch and most importantly, its Z configuration is more stable than the E isomer. Herein, we reveal yet another unique feature of this emerging class of photoswitches. In striking contrast to azobenzenes and other photochromes, diazocine can be selectively switched in E → Z direction and most intriguingly from its thermodynamically stable Z to metastable E isomer upon successive excitation of two different triplet sensitizers present in solution at the same time. This approach leads to extraordinary large redshift of excitation wavelengths to perform isomerization i.e. from 400 nm blue to 530 nm green light (Z → E) and from 530 nm green to 740 nm far-red one (E → Z), which falls in the near-infrared window in biological tissue. Therefore, this work opens up of potential avenues for utilizing diazocines for example in photopharmacology, smart materials, light energy harvesting/storage devices, and out-of-equilibrium systems.

Metal-Organic Bichromophore Lowers the Upconversion Excitation Power Threshold and Promotes UV Photoreactions

Sensitized triplet-triplet annihilation upconversion is a promising strategy to use visible light for chemical reactions requiring the energy input of UV photons. This strategy avoids unsafe ultraviolet light sources and can mitigate photo-damage and provide access to reactions, for which filter effects hamper direct UV excitation. Here, we report a new approach to make blue-to-UV upconversion more amenable to photochemical applications. The tethering of a naphthalene unit to a cyclometalated iridium(III) complex yields a bichromophore with a high triplet energy (2.68 eV) and a naphthalene-based triplet reservoir featuring a lifetime of 72.1 μs, roughly a factor of 20 longer than the photoactive excited state of the parent iridium(III) complex. In combination with three different annihilators, consistently lower thresholds for the blue-to-UV upconversion to crossover from a quadratic into a linear excitation power dependence regime were observed with the bichromophore compared to the parent iridium(III) complex. The upconversion system composed of the bichromophore and the 2,5-diphenyloxazole annihilator is sufficiently robust under long-term blue irradiation to continuously provide a high-energy singlet-excited state that can drive chemical reactions normally requiring UV light. Both photoredox and energy transfer catalyses were feasible using this concept, including the reductive N-O bond cleavage of Weinreb amides, a C-C coupling reaction based on reductive aryl debromination, and two Paternò-Büchi [2 + 2] cycloaddition reactions. Our work seems relevant in the context of developing new strategies for driving energetically demanding photochemistry with low-energy input light.

Critical Techniques for Overcoming the Diffusion Limitations in Heterogeneously Catalytic Depolymerization of Lignin

Heterogeneously catalyzed depolymerization of lignin to value-added chemicals is increasingly attractive but highly challengeable. Particularly, the diffusion limitation of lignin macromolecule to the solid catalyst surface is a big barrier, which significantly decreases the yield of monomer while increasing char formation. Therefore, for the potential industrial utilization of lignin, new knowledge focused on the size of lignin particles is of great importance to offer guidance for promoting lignin depolymerization and suppressing condensation in the heterogeneously catalytic systems. In this Review, the size of lignin particles and macromolecules are summarized. Previous approaches for improving the mass diffusion including enhancing the solubility of lignin and exploitation of hierarchical and "solubilized" materials are also discussed. Based on these, a constructive perspective is proposed. Thus, this work provides a new insight on the rational design of heterogeneous catalytic techniques for efficient utilization of the aromatic polymer of lignin.

Isocyanide-Based Multicomponent Reactions Promoted by Visible Light Photoredox Catalysis

Isocyanide-based multicomponent reactions claim a one century-old history of flourishing developments. On the other hand, the enormous impact of recent progresses in visible light photocatalysis has boosted the identification of new straightforward and green approaches to both new and known chemical entities. In this context, the application of visible light photocatalytic conditions to multicomponent processes has been promoting key stimulating advancements. Spanning from radical-polar crossover pathways, to photoinduced and self-catalyzed transformations, to reactions involving the generation of imidoyl radical species, the present literature analysis would provide a general and critical overview about the potentialities and challenges of exploiting isocyanides in visible light photocatalytic multicomponent reactions.

Access to Azetidines via Gold Mediated Energy Transfer Photocatalysis

The area of energy transfer photocatalysis to generate four-membered rings is experiencing an unprecedented level of activity. Here, we report an operationally simple method toward azetidines from 2-isoxasoline-3-carboxylates and alkenes, using [Au(cbz)(NHC)] complexes as photocatalysts. The procedure enables the reaction for a wide range of substrates. Mechanistic studies confirm the energy transfer pathway. This contribution adds to the earlier reported use of these gold catalysts as a potentially versatile tool in energy transfer chemistry and catalysis.

Boronated Cyanometallates

Thirteen boronated cyanometallates [M(CN-BR₃)₆]^3/4/5- [M = Cr, Mn, Fe, Ru, Os; BR₃ = BPh₃, B(2,4,6,-F₃C₆H₂)₃, B(C₆F₅)₃] and one metalloboratonitrile [Cr(NC-BPh₃)₆]^3- have been characterized by X-ray crystallography and spectroscopy [UV-vis-near-IR, NMR, IR, spectroelectrochemistry, and magnetic circular dichroism (MCD)]; CASSCF+NEVPT2 methods were employed in calculations of electronic structures. For (t_2g)⁵ electronic configurations, the lowest-energy ligand-to-metal charge-transfer (LMCT) absorptions and MCD C-terms in the spectra of boronated species have been assigned to transitions from cyanide π + B-C borane σ orbitals. CASSCF+NEVPT2 calculations including t_1u and t_2u orbitals reproduced t_1u/t_2u → t_2g excitation energies. Many [M(CN-BR₃)₆]^3/4- complexes exhibited highly electrochemically reversible redox couples. Notably, the reduction formal potentials of all five [M(CN-B(C₆F₅)₃)₆]^3- anions scale with the LMCT energies, and Mn(I) and Cr(II) compounds, [K(18-crown-6)]₅[Mn(CN-B(C₆F₅)₃)₆] and [K(18-crown-6)]₄[Cr(CN-B(C₆F₅)₃)₆], are surprisingly stable. Continuous-wave and pulsed electron paramagnetic resonance (EPR; hyperfine sublevel correlation) spectra were collected for all Cr(III) complexes; as expected, ¹⁴N hyperfine splittings are greater for (Ph₄As)₃[Cr(NC-BPh₃)₆] than for (Ph₄As)₃[Cr(CN-BPh₃)₆].

Blue-to-UVB Upconversion, Solvent Sensitization and Challenging Bond Activation Enabled by a Benzene-Based Annihilator

Several energy-demanding photoreactions require harsh UV light from inefficient light sources. The conversion of low-energy visible light to high-energy singlet states via triplet-triplet annihilation upconversion (TTA-UC) could offer a solution for driving such reactions under mild conditions. We present the first annihilator with an emission maximum in the UVB region that, combined with an organic sensitizer, is suitable for blue-to-UVB upconversion. The annihilator singlet was successfully employed as an energy donor in subsequent FRET activations of aliphatic carbonyls. This hitherto unreported UC-FRET reaction sequence was directly monitored using laser spectroscopy and applied to mechanistic irradiation experiments demonstrating the feasibility of Norrish chemistry. Our results provide clear evidence for a novel blue light-driven substrate or solvent activation strategy, which is important in the context of developing more sustainable light-to-chemical energy conversion systems.

Substituent-Dependent Azide Addition to Isocyanides Generates Strongly Luminescent Iridium Complexes

Ligand-centered functionalization reactions offer diverse strategies to prepare luminescent organometallic compounds. These compounds can have unique structures that are not accessible via traditional coordination chemistry and can possess enhanced or unusual photophysical properties. Here we show that bis-cyclometalated iridium bis-isocyanide complexes (1) react with azide (N₃^-) to form novel luminescent structures. The fate of the reaction with azide is determined primarily by the substituent on the aryl isocyanide. Those with electron-withdrawing substituents (CF₃ or NO₂) react with 1 equiv of azide followed by N₂ extrusion, forming aryl cyanamido products (2). With electron-donating groups on the aryl isocyanide the reactivity is more diverse, and three outcomes are possible. In two cases, the isocyanide and azide undergo a [3 + 2] cycloaddition to form a C-bound tetrazolato structure (3). In three other cases, 2 equiv of azide are involved in the formation of a previously unobserved structure, where a tetrazolato and aryl cyanamido couple and rearrange to form a chelating ligand comprised of an N-bound tetrazolato and an acyclic diaminocarbene (4). Finally, a bimetallic aryl cyanamido complex (5) is isolated in one case. All compounds are luminescent, some with exceptional photoluminescence quantum yields as high as 0.81 in solution for sky-blue emission, and 0.87 for yellow emission and 0.65 for orange-red emission in polymer films.

Zinc(II) Complexes with Triplet Charge-Transfer Excited States Enabling Energy-Transfer Catalysis, Photoinduced Electron Transfer, and Upconversion

Many Cu^I complexes have luminescent triplet charge-transfer excited states with diverse applications in photophysics and photochemistry, but for isoelectronic Zn^II compounds, this behavior is much less common, and they typically only show ligand-based fluorescence from singlet π-π* states. We report two closely related tetrahedral Zn^II compounds, in which intersystem crossing occurs with appreciable quantum yields and leads to the population of triplet excited states with intraligand charge-transfer (ILCT) character. In addition to showing fluorescence from their initially excited ¹ILCT states, these new compounds therefore undergo triplet-triplet energy transfer (TTET) from their ³ILCT states and consequently can act as sensitizers for photo-isomerization reactions and triplet-triplet annihilation upconversion from the blue to the ultraviolet spectral range. The photoactive ³ILCT state furthermore facilitates photoinduced electron transfer. Collectively, our findings demonstrate that mononuclear Zn^II compounds with photophysical and photochemical properties reminiscent of well-known Cu^I complexes are accessible with suitable ligands and that they are potentially amenable to many different applications. Our insights seem relevant in the greater context of obtaining photoactive compounds based on abundant transition metals, complementing well-known precious-metal-based luminophores and photosensitizers.

Borylation in the Second Coordination Sphere of FeII Cyanido Complexes and Its Impact on Their Electronic Structures and Excited-State Dynamics

Second coordination sphere interactions of cyanido complexes with hydrogen-bonding solvents and Lewis acids are known to influence their electronic structures, whereby the non-labile attachment of B(C₆F₅)₃ resulted in several particularly interesting new compounds lately. Here, we investigate the effects of borylation on the properties of two Fe^II cyanido complexes in a systematic manner by comparing five different compounds and using a range of experimental techniques. Electrochemical measurements indicate that borylation entails a stabilization of the Fe^II-based t_2g-like orbitals by up to 1.65 eV, and this finding was confirmed by Mössbauer spectroscopy. This change in the electronic structure has a profound impact on the UV–vis absorption properties of the borylated complexes compared to the non-borylated ones, shifting their metal-to-ligand charge transfer (MLCT) absorption bands over a wide range. Ultrafast UV–vis transient absorption spectroscopy provides insight into how borylation affects the excited-state dynamics. The lowest metal-centered (MC) excited states become shorter-lived in the borylated complexes compared to their cyanido analogues by a factor of ∼10, possibly due to changes in outer-sphere reorganization energies associated with their decay to the electronic ground state as a result of B(C₆F₅)₃ attachment at the cyanido N lone pair.

Borylation in the second coordination sphere of two well-known Fe^II cyanido complexes leads to isocyanoborato complexes. The effects of borylation on their electronic structure and photophysical properties are thoroughly investigated with a range of experimental techniques.

Shedding Light on the Oxidizing Properties of Spin-Flip Excited States in a CrIII Polypyridine Complex and Their Use in Photoredox Catalysis

The photoredox activity of well-known Ru^II complexes stems from metal-to-ligand charge transfer (MLCT) excited states, in which a ligand-based electron can initiate chemical reductions and a metal-centered hole can trigger oxidations. Cr^III polypyridines show similar photoredox properties, although they have fundamentally different electronic structures. Their photoactive excited state is of spin-flip nature, differing from the electronic ground state merely by a change of one electron spin, but with otherwise identical d-orbital occupancy. We find that the driving-force dependence for photoinduced electron transfer from 10 different donors to a spin-flip excited state of a Cr^III complex is very similar to that for a Ru^II polypyridine, and thereby validate the concept of estimating the redox potential of d³ spin-flip excited states in analogous manner as for the MLCT states of d⁶ compounds. Building on this insight, we use our Cr^III complex for photocatalytic reactions not previously explored with this compound class, including the aerobic bromination of methoxyaryls, oxygenation of 1,1,2,2-tetraphenylethylene, aerobic hydroxylation of arylboronic acids, and the vinylation of N-phenyl pyrrolidine. This work contributes to understanding the fundamental photochemical properties of first-row transition-metal complexes in comparison to well-explored precious-metal-based photocatalysts.

Reinterpreting the Fate of Iridium(III) Photocatalysts─Screening a Combinatorial Library to Explore Light-Driven Side-Reactions

Photoredox catalysts are primarily selected based on ground and excited state properties, but their activity is also intrinsically tied to the nature of their reduced (or oxidized) intermediates. Catalyst reactivity often necessitates an inherent instability, thus these intermediates represent a mechanistic turning point that affords either product formation or side-reactions. In this work, we explore the scope of a previously demonstrated side-reaction that partially saturates one pyridine ring of the ancillary ligand in heteroleptic iridium(III) complexes. Using high-throughput synthesis and screening under photochemical conditions, we identified different chemical pathways, ultimately governed by ligand composition. The ancillary ligand was the key factor that determined photochemical stability. Following photoinitiated electron transfer from a sacrificial tertiary amine, the reduced intermediate of complexes containing 1,10-phenanthroline derivatives exhibited long-term stability. In contrast, complexes containing 2,2'-bipyridines were highly susceptible to hydrogen atom transfer and ancillary ligand modification. Detailed characterization of selected complexes before and after transformation showed differing effects on the ground and excited state reduction potentials dependent on the nature of the cyclometalating ligands and excited states. The implications of catalyst stability and reactivity in chemical synthesis was demonstrated in a model photoredox reaction.

Manganese(I) Complex with Monodentate Arylisocyanide Ligands Shows Photodissociation Instead of Luminescence

Recently reported manganese(I) complexes with chelating arylisocyanide ligands exhibit luminescent metal-to-ligand charge-transfer (MLCT) excited states, similar to ruthenium(II) polypyridine complexes with the same d⁶ valence electron configuration used for many different applications in photophysics and photochemistry. However, chelating arylisocyanide ligands require substantial synthetic effort, and therefore it seemed attractive to explore the possibility of using more readily accessible monodentate arylisocyanides instead. Here, we synthesized the new Mn(I) complex [Mn(CNdippPh^OMe2)₆]PF₆ with the known ligand CNdippPh^OMe2 = 4-(3,5-dimethoxyphenyl)-2,6-diisopropylphenylisocyanide. This complex was investigated by NMR spectroscopy, single-crystal structure analysis, high-resolution electrospray ionization mass spectrometry (HR-ESI-MS) measurements, IR spectroscopy supported by density functional theory (DFT) calculations, cyclic voltammetry, and time-resolved as well as steady-state UV–vis absorption spectroscopy. The key finding is that the new Mn(I) complex is nonluminescent and instead undergoes arylisocyanide ligand loss during continuous visible laser irradiation into ligand-centered and charge-transfer absorption bands, presumably owed to the population of dissociative d–d excited states. Thus, it seems that chelating bi- or tridentate binding motifs are essential for obtaining emissive MLCT excited states in manganese(I) arylisocyanides. Our work contributes to understanding the basic properties of photoactive first-row transition metal complexes and could help advance the search for alternatives to precious metal-based luminophores, photocatalysts, and sensors.

We report the synthesis, characterization, and X-ray crystal structure of an octahedral manganese(I) complex with six monodentate arylisocyanide ligands that undergoes photoinduced ligand loss.

Energy transfer (EnT) photocatalysis enabled by gold-N-heterocyclic carbene (NHC) complexes

We present the use of gold sensitizers [Au(SIPr)(Cbz)] (PhotAu 1) and [Au(IPr)(Cbz)] (PhotAu 2) as attractive alternatives to state-of-the-art iridium-based systems. These novel photocatalysts are deployed in [2 + 2] cycloadditions of diallyl ethers and N-tosylamides. The reactions proceed in short reaction times and in environmentally friendly solvents. [Au(SIPr)Cbz] and [Au(IPr)(Cbz)] have higher triplet energy (E _T) values (66.6 and 66.3 kcal mol^-1, respectively) compared to commonly used iridium photosensitizers. These E _T values permit the use of these gold complexes as sensitizers enabling energy transfer catalysis involving unprotected indole derivatives, a substrate class previously inaccessible with state-of-the-art Ir photocatalysts. The photosynthesis of unprotected tetracyclic spiroindolines via intramolecular [2 + 2] cycloaddition using our simple mononuclear gold sensitizer is readily achieved. Mechanistic studies support the involvement of triplet-triplet energy transfer (TTEnT) for both [2 + 2] photocycloadditions.

Cobalt(III) Carbene Complex with an Electronic Excited-State Structure Similar to Cyclometalated Iridium(III) Compounds

Many organometallic iridium(III) complexes have photoactive excited states with mixed metal-to-ligand and intraligand charge transfer (MLCT/ILCT) character, which form the basis for numerous applications in photophysics and photochemistry. Cobalt(III) complexes with analogous MLCT excited-state properties seem to be unknown yet, despite the fact that iridium(III) and cobalt(III) can adopt identical low-spin d⁶ valence electron configurations due to their close chemical relationship. Using a rigid tridentate chelate ligand (L^CNC), in which a central amido π-donor is flanked by two σ-donating N-heterocyclic carbene subunits, we obtained a robust homoleptic complex [Co(L^CNC)₂](PF₆), featuring a photoactive excited state with substantial MLCT character. Compared to the vast majority of isoelectronic iron(II) complexes, the MLCT state of [Co(L^CNC)₂](PF₆) is long-lived because it does not deactivate as efficiently into lower-lying metal-centered excited states; furthermore, it engages directly in photoinduced electron transfer reactions. The comparison with [Fe(L^CNC)₂](PF₆), as well as structural, electrochemical, and UV–vis transient absorption studies, provides insight into new ligand design principles for first-row transition-metal complexes with photophysical and photochemical properties reminiscent of those known from the platinum group metals.

Water-Soluble Tris(cyclometalated) Iridium(III) Complexes for Aqueous Electron and Energy Transfer Photochemistry

Cyclometalated iridium(III) complexes are frequently employed in organic light emitting diodes, and they are popular photocatalysts for solar energy conversion and synthetic organic chemistry. They luminesce from redox-active excited states that can have high triplet energies and long lifetimes, making them well suited for energy transfer and photoredox catalysis. Homoleptic tris(cyclometalated) iridium(III) complexes are typically very hydrophobic and do not dissolve well in polar solvents, somewhat limiting their application scope. We developed a family of water-soluble sulfonate-decorated variants with tailored redox potentials and excited-state energies to address several key challenges in aqueous photochemistry.

First, we aimed at combining enzyme with photoredox catalysis to synthesize enantioenriched products in a cyclic reaction network. Since the employed biocatalyst operates best in aqueous solution, a water-soluble photocatalyst was needed. A new tris(cyclometalated) iridium(III) complex provided enough reducing power for the photochemical reduction of imines to racemic mixtures of amines and furthermore was compatible with monoamine oxidase (MAO-N-9), which deracemized this mixture through a kinetic resolution of the racemic amine via oxidation to the corresponding imine. This process led to the accumulation of the unreactive amine enantiomer over time. In subsequent studies, we discovered that the same iridium(III) complex photoionizes under intense irradiation to give hydrated electrons as a result of consecutive two-photon excitation. With visible light as energy input, hydrated electrons become available in a catalytic fashion, thereby allowing the comparatively mild reduction of substrates that would typically only be reactive under harsher conditions. Finally, we became interested in photochemical upconversion in aqueous solution, for which it was desirable to obtain water-soluble iridium(III) compounds with very high triplet excited-state energies. This goal was achieved through improved ligand design and ultimately enabled sensitized triplet–triplet annihilation upconversion unusually far into the ultraviolet spectral range.

Studies of photoredox catalysis, energy transfer catalysis, and photochemical upconversion typically rely on the use of organic solvents. Water could potentially be an attractive alternative in many cases, but photocatalyst development lags somewhat behind for aqueous solution compared to organic solvent. The purpose of this Account is to provide an overview of the breadth of new research perspectives that emerged from the development of water-soluble fac-[Ir(ppy)]₃ complexes (ppy = 2-phenylpyridine) with sulfonated ligands. We hope to inspire the use of some of these or related coordination compounds in aqueous photochemistry and to stimulate further conceptual developments at the interfaces of coordination chemistry, photophysics, biocatalysis, and sustainable chemistry.

Best practice in determining key photophysical parameters in triplet-triplet annihilation photon upconversion

Triplet-triplet annihilation photon upconversion (TTA-UC) is a process in which low-energy light is transformed into light of higher energy. During the last two decades, it has gained increasing attention due to its potential in, e.g., biological applications and solar energy conversion. The highest efficiencies for TTA-UC systems have been achieved in liquid solution, owing to that several of the intermediate steps require close contact between the interacting species, something that is more easily achieved in diffusion-controlled environments. There is a good understanding of the kinetics dictating the performance in liquid TTA-UC systems, but so far, the community lacks cohesiveness in terms of how several important parameters are best determined experimentally. In this perspective, we discuss and present a "best practice" for the determination of several critical parameters in TTA-UC, namely triplet excited state energies, rate constants for triplet-triplet annihilation ([Formula: see text]), triplet excited-state lifetimes ([Formula: see text]), and excitation threshold intensity ([Formula: see text]). Finally, we introduce a newly developed method by which [Formula: see text], [Formula: see text], and [Formula: see text] may be determined simultaneously using the same set of time-resolved emission measurements. The experiment can be performed with a simple experimental setup, be ran under mild excitation conditions, and entirely circumvents the need for more challenging nanosecond transient absorption measurements, a technique that previously has been required to extract [Formula: see text]. Our hope is that the discussions and methodologies presented herein will aid the photon upconversion community in performing more efficient and manageable experiments while maintaining-and sometimes increasing-the accuracy and validity of the extracted parameters.