Ultrahigh Stable Methanol Oxidation Enabled by a High Hydroxyl Concentration on Pt Clusters/MXene Interfaces

Ultrathin Carbon Shell Protecting Copper Sites to Boost Anodic Hydrogen Production via Low-Potential Formaldehyde Oxidation

The oxidation of aldehydes on a copper-based electrocatalyst within a small potential window can produce hydrogen at the anode, thus offering a bipolar hydrogen production system. However, the inherent activity and stability of Cu-based electrocatalysts for aldehyde oxidation are still not satisfactory in practical application. Herein, by coating an ultrathin carbon shell on the copper sphere, an effective and stable formaldehyde oxidation reaction (FOR) can be realized to produce H2 at a very low potential. FOR needs only a potential of 0.13 V (vs RHE) to reach a current density of 100 mA cm-2. By coupling FOR with hydrogen evolution reaction (HER), hydrogen is generated simultaneously at both the cathode and the anode. The Faraday efficiency of H2 at the bipolar state is close to 100%. In a flow cell, it needs a low cell voltage of 0.1 V to reach a current density of 100 mA cm-2. Moreover, it can be operated steadily for more than 30 h at high current density. The carbon shell acts as an armor to protect the Cu(0) sites, avoid the oxidation of copper, and keep the catalyst activity for a long time in the electrolytic process. Experimental and theoretical calculation results indicate that electron transfer occurs at the interface between the copper core and ultrathin carbon shell. The ultrathin carbon-coated Cu reduces the reaction energy barrier, making the C-H bond more easily fractured and facilitating H coupling to generate H2. This study provides a basic principle for the design of copper-based electrocatalysts with long durability and activity.

Self-Assembly of a Hierarchical Metal-Organic Framework at the Liquid/Liquid Interface via π-π Stacking Manipulations in Organoplatinum(IV) Complexes for Methanol Fuel Cells

This study focuses on the facile synthesis of the hierarchical architecture of zeolitic imidazolate framework-8 (ZIF-8) films containing an ultrasmall amount of Pt(0) by investigating the synthesis of different organoplatinum complexes and manipulating the π-π stacking effect in these complexes at the liquid/liquid interface. The organometallic Pt(IV) precursors were complexes with a formula of [PtXMe2(R)(bpy)] (bpy = 2,2'-bipyridine; for complex 2, R = CH2CH═CHC6H5 and X = Br; for complex 3, R = CH2CH═CH2 and X = Br; for complex 4, R = Me and X = I) prepared by oxidative addition of cinnamyl bromide, allyl bromide, or methyl iodide to [PtMe2(bpy)] (complex 1). Different thin films were synthesized starting from three organometallic Pt(IV) precursors (i) by reduction of the Pt complexes at the toluene/water interface (TF2-TF4), (ii) by encapsulation of the Pt precursors in a ZIF-8 (TF5-TF7), and (iii) by reduction of the Pt precursors onto a ZIF-8 (TF8-TF10). The self-assembly of ZIF-8 and different organoplatinum precursors at the interface of two immiscible liquids leads to the preparation of films with well-engineered structures such as rhombic dodecahedra, nanorods, hierarchical architectures, and nanowires, which are very difficult and complicated to synthesize under normal conditions. The ultralow loading of platinum complexes with different degrees of π-π stacking of dangling moieties has a great impact on the structure and morphology (directing agent), which in turn drastically changes the catalytic properties. The obtained films were applied as electrocatalysts for methanol oxidation in fuel cells. The electrocatalytic performance of organoplatinum containing a cinnamyl group in hierarchical architecture TF8 was found to be superior to those of nonhierarchical structures.

Lanthanide-Induced Ligand Effect to Regulate the Electronic Structure of Platinum-Lanthanide Nanoalloys for Efficient Methanol Oxidation

The ligand effect in alloy catalysts is one of the decisive parameters of the catalytic performance. However, the strong interrelation between the ligand effect and the geometric effect of the active atom and its neighbors as well as the systematic alteration of the microenvironment of the active site makes the active mechanism unclear. Herein, Pt3Tm, Pt3Yb, and Pt3Lu with a cubic crystal system (Pm-3m) were selected. With the difference of Pt-Pt interatomic distance within 0.02 Å, we minimize the geometric effect to realize the disentanglement of the system. Through precise characterization, due to the low electronegativity of Ln (Ln = Tm, Yb, and Lu) and the ligand effect in the alloy, the electronic structure of Pt is continuously optimized, which improves the electrochemical methanol oxidation reaction (MOR) performance. The Ln electronegativity has a linear relationship with the MOR performance, and Pt3Yb/C achieves a high mass activity of up to 11.61 A mgPt-1, which is the highest value reported so far in Pt-based electrocatalysts. The results obtained in this study provide fundamental insights into the mechanism of ligand effects on the enhancement of electrochemical activity in rare-earth nanoalloys.

Pt1.8Pd0.2CuGa Intermetallic Nanocatalysts with Enhanced Methanol Oxidation Performance for Efficient Hybrid Seawater Electrolysis

Seawater electrolysis is a potentially cost-effective approach to green hydrogen production, but it currently faces substantial challenges for its high energy consumption and the interference of chlorine evolution reaction (ClER). Replacing the energy-demanding oxygen evolution reaction with methanol oxidation reaction (MOR) represents a promising alternative, as MOR occurs at a significantly low anodic potential, which cannot only reduce the voltage needed for electrolysis but also completely circumvents ClER. To this end, developing high-performance MOR catalysts is a key. Herein, a novel quaternary Pt1.8Pd0.2CuGa/C intermetallic nanoparticle (i-NP) catalyst is reported, which shows a high mass activity (11.13 A mgPGM -1), a large specific activity (18.13 mA cmPGM -2), and outstanding stability toward alkaline MOR. Advanced characterization and density functional theory calculations reveal that the introduction of atomically distributed Pd in Pt2CuGa intermetallic markedly promotes the oxidation of key reaction intermediates by enriching electron concentration around Pt sites, resulting in weak adsorption of carbon-containing intermediates and favorable adsorption of synergistic OH- groups near Pd sites. MOR-assisted seawater electrolysis is demonstrated, which continuously operates under 1.23 V for 240 h in simulated seawater and 120 h in natural seawater without notable degradation.

Interstitial Boron Atoms in Pd Aerogel Selectively Switch the Pathway for Glycolic Acid Synthesis from Waste Plastics

Electro-reforming of poly(ethylene terephthalate) (PET) into valuable chemicals is garnering significant attention as it opens a mild avenue for waste resource utilization. However, achieving high activity and selectivity for valuable C2 products during ethylene glycol (EG) oxidation in PET hydrolysate on Pd electrocatalysts remains challenging. The strong interaction between Pd and carbonyl (*CO) intermediates leads to undesirable over-oxidation and poisoning of Pd sites, which hinders the highly efficient C2 products production. Herein, a nonmetallic alloying strategy is employed to fabricate a Pd-boron alloy aerogel (PdB), wherein B atoms are induced to regulate the electron structure and surface oxophilicity. This approach allows a remarkable mass activity of 6.71 A mgPd -1, glycolic acid (GA) Faradaic efficiency (FE) of 93.8%, and stable 100 h cyclic electrolysis. In situ experiments and density functional theory calculations reveal the contributions of B inserted in Pd lattice on highly effective EG-to-GA conversion. Interestingly, the heightened surface oxophilicity and regulated electronic structure by B incorporation weakened *CO intermediates adsorption and enhanced hydroxyl species affinity to accelerate oxidative *OH adspecies formation, thereby synergistically avoiding over-oxidation and boosting GA synthesis. This work provides valuable insights for the rational design of high-performance electrocatalysts for GA synthesis via an oxophilic B motifs incorporation strategy.

Rationally Designed L12-Pt2RhFe Intermetallic Catalyst with High CO-Tolerance for Alkaline Methanol Electrooxidation

It is a grand challenge to deep understanding of and precise control over functional sites for the rational design of highly efficient catalysts for methanol electrooxidation. Here, an L12-Pt2RhFe intermetallic catalyst with integrated functional components is demonstrated, which exhibits exceptional CO tolerance. The Pt2RhFe/C achieves a superior mass activity of 6.43 A mgPt -1, which is 2.23-fold and 3.53-fold higher than those of PtRu/C and Pt/C. Impressively, the Pt2RhFe/C exhibits a significant enhancement in durability owing to its high CO-tolerance and stability. Density functional theory calculations reveal that high performance of Pt2RhFe intermetallic catalyst arises from the synergistic effect: the strong OH binding energy (OHBE) at Fe sites induce stably adsorbed OH species and thus facilitate the dehydrogenation step of methanol via rapid hydrogen transfer, while moderate OHBE at Rh sites promote the formation of the transition state (Pt-CO···OH-Rh) with a low activation barrier for CO removal. This work provides new insights into the role of OH binding strength in the removal of CO species, which is beneficial for the rational design of highly efficient catalysts.

Constructing Gradient Orbital Coupling to Induce Reactive Metal-Support Interaction in Pt-Carbide Electrocatalysts for Efficient Methanol Oxidation

Reactive metal-support interaction (RMSI) is an emerging way to regulate the catalytic performance for supported metal catalysts. However, the induction of RMSI by the thermal reduction is often accompanied by the encapsulation effect on metals, which limits the mechanism research and applications of RMSI. In this work, a gradient orbital coupling construction strategy was successfully developed to induce RMSI in Pt-carbide system without a reductant, leading to the formation of L12-PtxM-MCy (M = Ti, Zr, Hf, V, Nb, Ta, Cr, Mo, and W) intermetallic electrocatalysts. Density functional theory (DFT) calculations suggest that the gradient coupling of the d(M)-2p(C)-5d(Pt) orbital would induce the electron transfer from M to C covalent bonds to Pt NPs, which facilitates the formation of C vacancy (Cv) and the subsequent M migration (occurrence of RMSI). Moreover, the good correlation between the formation energy of Cv and the onset temperature of RMSI in Pt-MCx systems proves the key role of nonmetallic atomic vacancy formation for inducing RMSI. The developed L12-Pt3Ti-TiC catalyst exhibits excellent acidic methanol oxidation reaction activity, with mass activity of 2.36 A mgPt-1 in half-cell and a peak power density of 187.9 mW mgPt-1 in a direct methanol fuel cell, which is one of the best catalysts ever reported. DFT calculations reveal that L12-Pt3Ti-TiC favorably weakens *CO absorption compared to Pt-TiC due to the change of the absorption site from Pt to Ti, which accounts for the enhanced MOR performance.

Regulating Reconstruction-Engineered Active Sites for Accelerated Electrocatalytic Conversion of Urea

Reconstruction-engineered electrocatalysts with enriched high active Ni species for urea oxidation reaction (UOR) have recently become promising candidates for energy conversion. However, to inhibit the over-oxidation of urea brought by the high valence state of Ni, tremendous efforts are devoted to obtaining low-value products of nitrogen gas to avoid toxic nitrite formation, undesirably causing inefficient utilization of the nitrogen cycle. Herein, we proposed a mediation engineering strategy to significantly boost high-value nitrite formation to help close a loop for the employment of a nitrogen economy. Specifically, platinum-loaded nickel phosphides (Pt-Ni2P) catalysts exhibit a promising nitrite production rate (0.82 mol kWh-1 cm-2), high stability over 66 h of Zn-urea-air battery operation, and 135 h of co-production of nitrite and hydrogen under 200 mA cm-2 in a zero-gap membrane electrode assembly (MEA) system. The in situ spectroscopic characterizations and computational calculations demonstrated that the urea oxidation kinetics is facilitated by enriched dynamic Ni3+ active sites, thus augmenting the "cyanate" UOR pathway. The C-N cleavage was further verified as the rate-determining step for nitrite generation.

In Situ Pt Migration Enabled Resurrection of Electrocatalyst and Fuel Cell Device

In direct methanol fuel cells (DMFCs), the poisoning of noble metals is considered to be a major impediment to their commercial development. Here, it is found that the loss of surface Pt is one main reason for the attenuation of catalyst performance during long-time methanol oxidation reaction (MOR). A strategy to realize in situ resurrection of the deactivated catalyst by migrating Pt atoms inside to the surface is innovatively proposed. A high-activity Pt-SnO2 is designed, whose MOR activity is resurrected to 97.4% of the initial value. Based on this, the multiple resurrection of a DMFC device is also achieved for the first time. This work provides a new approach for the solution of catalyst deactivation and the development of sustainable catalysts as well as fuel cells.

Enhancing Ni/Co Activity by Neighboring Pt Atoms in NiCoP/MXene Electrocatalyst for Alkaline Hydrogen Evolution

Density functional theory (DFT) calculations demonstrate neighboring Pt atoms can enhance the metal activity of NiCoP for hydrogen evolution reaction (HER). However, it remains a great challenge to link Pt and NiCoP. Herein, we introduced curvature of bowl-like structure to construct Pt/NiCoP interface by adding a minimal 1 ‰-molar-ratio Pt. The as-prepared sample only requires an overpotential of 26.5 and 181.6 mV to accordingly achieve the current density of 10 and 500 mA cm-2 in 1 M KOH. The water dissociation energy barrier (Ea) has a ~43 % decrease compared with NiCoP counterpart. It also shows an ultrahigh stability with a small degradation rate of 10.6 μV h-1 at harsh conditions (500 mA cm-2 and 50 °C) after 3000 hrs. X-ray photoelectron spectroscopy (XPS), soft X-ray absorption spectroscopy (sXAS), and X-ray absorption fine structure (XAFS) verify the interface electron transfer lowers the valence state of Co/Ni and activates them. DFT calculations also confirm the catalytic transition step of NiCoP can change from Heyrovsky (2.71 eV) to Tafel step (0.51 eV) in the neighborhood of Pt, in accord with the result of the improved Hads at the interface disclosed by in situ electrochemical impedance spectroscopy (EIS) and scanning electrochemical microscopy (SECM) tests.

Surface-Enriched Single-Bi-Atoms Tailoring of Pt Nanorings for Direct Methanol Fuel Cells with Ultralow-Pt-Loading

Single-atom decorating of Pt emerges as a highly effective strategy to boost catalytic properties, which can trigger the most Pt active sites while blocking the smallest number of Pt atoms. However, the rational design and creation of high-density single-atoms on Pt surface remain as a huge challenge. Herein, a customized synthesis of surface-enriched single-Bi-atoms tailored Pt nanorings (SE-Bi1/Pt NRs) toward methanol oxidation is reported, which is guided by the density functional theory (DFT) calculations suggesting that a relatively higher density of Bi species on Pt surface can ensure a CO-free pathway and accelerate the kinetics of *HCOOH formation. Decorating Pt NRs with dense single-Bi-atoms is achieved by starting from PtBi intermetallic nanoplates (NPs) with intrinsically isolated Bi atoms and subsequent etching and annealing treatments. The SE-Bi1/Pt NRs exhibit a mass activity of 23.77 A mg-1 Pt toward methanol oxidation in alkaline electrolyte, which is 2.2 and 12.8 times higher than those of Pt-Bi NRs and Pt/C, respectively. This excellent activity endows the SE-Bi1/Pt NRs with a high likelihood to be used as a practical anodic electrocatalyst for direct methanol fuel cells （DMFCs） with high power density of 85.3 mW cm-2 and ultralow Pt loading of 0.39 mg cm-2.

Atomic Diffusion Engineered PtSnCu Nanoframes with High-Index Facets Boost Ethanol Oxidation

Electrochemical ethanol oxidation is crucial to directly convert a biorenewable liquid fuel with high energy density into electrical energy, but it remains an inefficient reaction even with the best catalysts. To boost ethanol oxidation, developing multimetallic nanoalloy has emerged as one of the most effective strategies, yet faces a challenge in the rational engineering of multimetallic active-site ensembles at atomic-level. Herein, starting from typical PtCu nanocrystals, an atomic Sn diffusion strategy is developed to construct well-defined Pt47Sn12Cu41 octopod nanoframes, which is enclosed by high-index facets of n (111)-(111), such as {331} and {221}. Pt47Sn12Cu41 achieves a high mass activity of 3.10 A mg-1 Pt and promotes the C-C bond breaking and oxidation of poisonous CO intermediate, representing a state-of-the-art electrocatalyst toward ethanol oxidation in acidic electrolyte. Density functional theory （DFT） calculations have confirmed that the introduction of Sn improves the electroactivity by uplifting the d-band center through the s-p-d coupling. Meanwhile, the strong binding of ethanol and the reduced energy barrier of CO oxidation guarantee a highly efficient ethanol oxidation process with improved Faradic efficiency of C1 products. This work offers a promising strategy for constructing novel multimetallic nanoalloys tailored by atomic metal sites as the efficient electrocatalysts.

Cu Tailoring Pt Enables Branched-Structured Electrocatalysts with High Concave Surface Curvature Toward Efficient Methanol Oxidation

Surface engineering offers opportunities for the design and synthesis of Pt-based alloyed electrocatalysts with high mass activity and resistance to CO poisoning, which is of great significance for methanol electrooxidation. Surface curvature regulation may endow electrocatalysts with enhanced atomic utilization and abundance of unsaturated atoms; however, a reliable synthetic route for controlled construction of tailorable curved surface is still lacking. Here, a colloidal-chemical method to synthesize two types of PtCu branched-structured electrocatalysts, where the concave curvature can be customized is reported. These studies show that, among various synthesis parameters, the concentration of CuCl2·2H2O precursor is the key factor in manipulating the reaction kinetics and determining the concave surface curvature. Significantly, PtCu branched nanocrystals with long and sharp arms (PtCu BNCs-L), featuring a high concave surface curvature, exhibit remarkable activity and stability toward MOR, which is mainly attributed to advanced features of a highly concave surface and the synergistically bifunctional effect from introduced oxophilic Cu metal. In situ Raman spectroscopy and CO stripping test demonstrates weakened CO adsorption and accelerated CO removal on PtCu BNCs-L. This work highlights the importance of surface curvature, opening up an appealing route for the design and synthesis of advanced electrocatalysts with well-defined surface configurations.

Unveiling synergy of strain and ligand effects in metallic aerogel for electrocatalytic polyethylene terephthalate upcycling

Recently, there has been a notable surge in interest regarding reclaiming valuable chemicals from waste plastics. However, the energy-intensive conventional thermal catalysis does not align with the concept of sustainable development. Herein, we report a sustainable electrocatalytic approach allowing the selective synthesis of glycolic acid (GA) from waste polyethylene terephthalate (PET) over a Pd67Ag33 alloy catalyst under ambient conditions. Notably, Pd67Ag33 delivers a high mass activity of 9.7 A mgPd-1 for ethylene glycol oxidation reaction (EGOR) and GA Faradaic efficiency of 92.7 %, representing the most active catalyst for selective GA synthesis. In situ experiments and computational simulations uncover that ligand effect induced by Ag incorporation enhances the GA selectivity by facilitating carbonyl intermediates desorption, while the lattice mismatch-triggered tensile strain optimizes the adsorption of *OH species to boost reaction kinetics. This work unveils the synergistic of strain and ligand effect in alloy catalyst and provides guidance for the design of future catalysts for PET upcycling. We further investigate the versatility of Pd67Ag33 catalyst on CO2 reduction reaction (CO2RR) and assemble EGOR//CO2RR integrated electrolyzer, presenting a pioneering demonstration for reforming waste carbon resource (i.e., PET and CO2) into high-value chemicals.

Pd/NiMoO4/NF electrocatalysts for the efficient and ultra-stable synthesis and electrolyte-assisted extraction of glycolate

Electrocatalytic conversion of organic small molecules is a promising technique for value-added chemical productions but suffers from high precious metal consumption, poor stability of electrocatalysts and tedious product separation. Here, a Pd/NiMoO4/NF electrocatalyst with much lowered Pd loading amount (3.5 wt.%) has been developed for efficient, economic, and ultra-stable glycolate synthesis, which shows high Faradaic efficiency (98.9%), yield (98.8%), and ultrahigh stability (1500 h) towards electrocatalytic ethylene glycol oxidation. Moreover, the obtained glycolic acid has been converted to value-added sodium glycolate by in-situ acid-base reaction in the NaOH electrolyte, which is atomic efficient and needs no additional acid addition for product separation. Moreover, the weak adsorption of sodium glycolate on the catalyst surface plays a significant role in avoiding excessive oxidation and achieving high selectivity. This work may provide instructions for the electrocatalyst design as well as product separation for the electrocatalytic conversions of alcohols.

Single-atom Mo-tailored high-entropy-alloy ultrathin nanosheets with intrinsic tensile strain enhance electrocatalysis

The precise structural integration of single-atom and high-entropy-alloy features for energy electrocatalysis is highly appealing for energy conversion, yet remains a grand challenge. Herein, we report a class of single-atom Mo-tailored PdPtNiCuZn high-entropy-alloy nanosheets with dilute Pt-Pt ensembles and intrinsic tensile strain (Mo1-PdPtNiCuZn) as efficient electrocatalysts for enhancing the methanol oxidation reaction catalysis. The as-made Mo1-PdPtNiCuZn delivers an extraordinary mass activity of 24.55 A mgPt-1 and 11.62 A mgPd+Pt-1, along with impressive long-term durability. The planted oxophilic Mo single atoms as promoters modify the electronic structure of isolated Pt sites in the high-entropy-alloy host, suppressing the formation of CO adsorbates and steering the reaction towards the formate pathway. Meanwhile, Mo promoters and tensile strain synergistically optimize the adsorption behaviour of intermediates to achieve a more energetically favourable pathway and minimize the methanol oxidation reaction barrier. This work advances the design of atomically precise catalytic sites by creating a new paradigm of single atom-tailored high-entropy alloys, opening an encouraging pathway to the design of CO-tolerance electrocatalysts.

Ir Single Atoms Boost Metal-Oxygen Covalency on Selenide-Derived NiOOH for Direct Intramolecular Oxygen Coupling

This investigation probes the intricate interplay of catalyst dynamics and reaction pathways during the oxygen evolution reaction (OER), highlighting the significance of atomic-level and local ligand structure insights in crafting highly active electrocatalysts. Leveraging a tailored ion exchange reaction followed by electrochemical dynamic reconstruction, we engineered a novel catalytic structure featuring single Ir atoms anchored to NiOOH (Ir1@NiOOH). This novel approach involved the strategic replacement of Fe with Ir, facilitating the transition of selenide precatalysts into active (oxy)hydroxides. This elemental substitution promoted an upward shift in the O 2p band and intensified the metal-oxygen covalency, thereby altering the OER mechanism toward enhanced activity. The shift from a single-metal site mechanism (SMSM) in NiOOH to a dual-metal-site mechanism (DMSM) in Ir1@NiOOH was substantiated by in situ differential electrochemical mass spectrometry (DEMS) and supported by theoretical insights. Remarkably, the Ir1@NiOOH electrode exhibited exceptional electrocatalytic performance, achieving overpotentials as low as 142 and 308 mV at current densities of 10 and 1000 mA cm-2, respectively, setting a new benchmark for the electrocatalysis of OER.

Alkali Etching of Porous PdCoZn Nanosheets for Boosting C-C Bond Cleavage of Ethylene Glycol Oxidation

Pd-based electrocatalysts are the most effective catalysts for ethylene glycol oxidation reaction (EGOR), while the disadvantages of poor stability, low resistance to neutrophilic, and low catalytic activity seriously hamper the development of direct ethylene glycol fuel cells (DEGFCs). In this work, defect-riched PdCoZn nanosheets (D-PdCoZn NSs) with ultrathin 2D NSs and porous structures are fabricated through the solvothermal and alkali etching processes. Benefiting from the presence of defects and ultrathin 2D structures, D-PdCoZn NSs demonstrate excellent electrocatalytic activity and good durability against EGOR in alkaline media. The mass activity and specific activity of D-PdCoZn NSs for EGOR are 9.5 A mg-1 and 15.7 mA cm-2 , respectively, which are higher than that of PdCoZn NSs, PdCo NSs, and Pd black. The D-PdCoZn NSs still maintain satisfactory mass activity after long-term durability tests. Meanwhile, in situ IR spectroscopy demonstrates that the presence of defects attenuated the adsorption of intermediates, which improves the selectivity of the C1 pathway with excellent anti-CO poisoning performance. This work not only provides an effective synthetic strategy for the preparation of Pd-based nanomaterials with defective structures but also indicates significant guidance for optimum C1 pathway selectivity of ethylene glycol and other challenging chemical transformations.

Enhanced Hydroxyl Adsorption in Ultrathin NiO/Cr2 O3 In-Plane Heterostructures for Efficient Alkaline Methanol Oxidation Reaction

The exploration of advanced nickel-based electrocatalysts for alkaline methanol oxidation reaction (MOR) holds immense promise for value-added organic products coupled with hydrogen production, but still remain challenging. Herein, we construct ultrathin NiO/Cr2 O3 in-plane heterostructures to promote the alkaline MOR process. Experimental and theoretical studies reveal that NiO/Cr2 O3 in-plane heterostructures enable a favorable upshift of the d-band center and enhanced adsorption of hydroxyl species, leading to accelerated generation of active NiO(OH)ads species. Furthermore, ultrathin in-plane heterostructures endow the catalyst with good charge transfer ability and adsorption behavior of methanol molecules onto catalytic sites, contributing to the improvement of alkaline MOR kinetics. As a result, ultrathin NiO/Cr2 O3 in-plane heterostructures exhibit a remarkable MOR activity with a high current density of 221 mA cm-2 at 0.6 V vs Ag/AgCl, which is 7.1-fold larger than that of pure NiO nanosheets and comparable with other highly active catalysts reported so far. This work provides an effectual strategy to optimize the activity of nickel-based catalysts and highlights the dominate efficacy of ultrathin in-plane heterostructures in alkaline MOR.

Methanol assisted water electrooxidation on noble metal free perovskite: RRDE insight into the catalyst's behaviour

In this work, we have hypothesized that noble metal-free perovskites are an essential class of oxygen evolution reaction (OER) catalysts in an alkaline medium and thus, they are a suitable candidate for the assisted water oxidation catalysts. Herein, we demonstrate that the origin of the methanol-assisted OER activity at near thermodynamic potential on perovskite electrode arises due to the involvement of additional hydroxyls as a result of dissociative chemisorption of methanol. When the perovskite electrode is screened for methanol electrooxidation reaction in 0.5 M KOH + 0.5 M methanol electrolyte, it delivers a two times higher current density. This imparts an 82 % increase in the evolution of oxygen gas moles with complete oxidation of methanol to carbon dioxide. Along with the electrochemical characterization to understand the electrocatalyst property, Rotating ring disk electrode (RRDE) technique is explored for the first time in literature to validate the catalyst's involvement during OER. RRDE is effective in understanding the lattice oxygen behaviour and methanol-assisted water electrooxidation during OER. Our results suggest new insights and ideas towards the oxygen evolution reaction process and the mechanistic insight into the elevated OER due to assisted methanol electrooxidation.

Interfacial Electronic Modulation of Dual-Monodispersed Pt-Ni3S2 as Efficacious Bi-Functional Electrocatalysts for Concurrent H2 Evolution and Methanol Selective Oxidation

Constructing the efficacious and applicable bi-functional electrocatalysts and establishing out the mechanisms of organic electro-oxidation by replacing anodic oxygen evolution reaction (OER) are critical to the development of electrochemically-driven technologies for efficient hydrogen production and avoid CO2 emission. Herein, the hetero-nanocrystals between monodispersed Pt (~ 2 nm) and Ni3S2 (~ 9.6 nm) are constructed as active electrocatalysts through interfacial electronic modulation, which exhibit superior bi-functional activities for methanol selective oxidation and H2 generation. The experimental and theoretical studies reveal that the asymmetrical charge distribution at Pt-Ni3S2 could be modulated by the electronic interaction at the interface of dual-monodispersed heterojunctions, which thus promote the adsorption/desorption of the chemical intermediates at the interface. As a result, the selective conversion from CH3OH to formate is accomplished at very low potentials (1.45 V) to attain 100 mA cm-2 with high electronic utilization rate (~ 98%) and without CO2 emission. Meanwhile, the Pt-Ni3S2 can simultaneously exhibit a broad potential window with outstanding stability and large current densities for hydrogen evolution reaction (HER) at the cathode. Further, the excellent bi-functional performance is also indicated in the coupled methanol oxidation reaction (MOR)//HER reactor by only requiring a cell voltage of 1.60 V to achieve a current density of 50 mA cm-2 with good reusability.

Functional MXenes: Progress and Perspectives on Synthetic Strategies and Structure-Property Interplay for Next-Generation Technologies

MXenes are a class of 2D materials that include layered transition metal carbides, nitrides, and carbonitrides. Since their inception in 2011, they have garnered significant attention due to their diverse compositions, unique structures, and extraordinary properties, such as high specific surface areas and excellent electrical conductivity. This versatility has opened up immense potential in various fields, catalyzing a surge in MXene research and leading to note worthy advancements. This review offers an in-depth overview of the evolution of MXenes over the past 5 years, with an emphasis on synthetic strategies, structure-property relationships, and technological prospects. A classification scheme for MXene structures based on entropy is presented and an updated summary of the elemental constituents of the MXene family is provided, as documented in recent literature. Delving into the microscopic structure and synthesis routes, the intricate structure-property relationships are explored at the nano/micro level that dictate the macroscopic applications of MXenes. Through an extensive review of the latest representative works, the utilization of MXenes in energy, environmental, electronic, and biomedical fields is showcased, offering a glimpse into the current technological bottlenecks, such asstability, scalability, and device integration. Moreover, potential pathways for advancing MXenes toward next-generation technologies are highlighted.

Co9S8 core-shell hollow spheres for enhanced oxygen evolution and methanol oxidation reactions by sulfur vacancy engineering

Cobalt sulfides, especially Co9S8, have been widely studied as a potential earth-abundant electrocatalyst for many electrochemical reactions, such as oxygen evolution reaction (OER) and methanol oxidation reaction (MOR). However, the electrocatalytic performance of Co9S8 is not satisfactory because of its comparatively sluggish charge transport and reaction kinetics. Defect engineering and constructing hollow nanostructures are effective methods to improve their electrocatalytic performance, therefore, exploring an efficient route to obtain Co9S8 catalysts, simultaneously possessing sulfur vacancies and hollow nanostructure, is necessary. In this study, Co9S8-x core-shell hollow spheres with sulfur vacancies were prepared via a two-step solvothermal strategy, followed by thermal treatment under an H2/Ar atmosphere. The content of sulfur vacancies can be regulated by varying the temperature during the thermal treatment. The obtained Co9S8-x core-shell hollow spheres exhibited interesting sulfur vacancy defect-dependent activity, one of which showed outstanding electrocatalysis performance for OER with an overpotential (η) of 294 m V (at 10 mA cm-2) and MOR catalysis efficiency (164.9 mA cm-2 at 1.8 V vs. RHE) in an alkaline medium. This study provides a promising and feasible pathway for developing efficient trifunctional electrocatalysts for renewable energy technologies.

Tunable CO2-to-syngas conversion via strong electronic coupling in S-scheme ZnGa2O4/g-C3N4 photocatalysts

The conversion of CO2 into syngas, a mixture of CO and H2, via photocatalytic reduction, is a promising approach towards achieving a sustainable carbon economy. However, the evolution of highly adjustable syngas, particularly without the use of sacrifice reagents or additional cocatalysts, remains a significant challenge. In this study, a step-scheme (S-scheme) 0D ZnGa2O4 nanodots (∼7 nm) rooted g-C3N4 nanosheets (denoted as ZnGa2O4/C3N4) heterojunction photocatalyst was synthesized vis a facial in-situ growth strategy for efficient CO2-to-syngas conversion. Both experimental and theoretical studies have demonstrated that the polymeric nature of g-C3N4 and highly distributed ZnGa2O4 nanodots synergistically contribute to a strong interaction between metal oxide and C3N4 support. Furthermore, the desirable S-scheme heterojunction in ZnGa2O4/C3N4 efficiently promotes charge separation, enabling strong photoredox ability. As a result, the S-scheme ZnGa2O4/C3N4 exhibited remarkable activity and selectivity in photochemical conversion of CO2 into syngas, with a syngas production rate of up to 103.3 μ mol g-1 h-1, even in the absence of sacrificial agents and cocatalyst. Impressively, the CO/H2 ratio of syngas can be tunable within a wide range from 1:4 to 2:1. This work exemplifies the effectiveness of a meticulously designed S-scheme heterojunction photocatalyst for CO2-to-syngas conversion with adjustable composition, thus paving the way for new possibilities in sustainable energy conversion and utilization.

Modification Strategies for Development of 2D Material-Based Electrocatalysts for Alcohol Oxidation Reaction

2D materials, such as graphene, MXenes (metal carbides and nitrides), graphdiyne (GDY), layered double hydroxides, and black phosphorus, are widely used as electrocatalyst supports for alcohol oxidation reactions (AORs) owing to their large surface area and unique 2D charge transport channels. Furthermore, the development of highly efficient electrocatalysts for AORs via tuning the structure of 2D support materials has recently become a hot area. This article provides a critical review on modification strategies to develop 2D material-based electrocatalysts for AOR. First, the principles and influencing factors of electrocatalytic oxidation of alcohols (such as methanol and ethanol) are introduced. Second, surface molecular functionalization, heteroatom doping, and composite hybridization are deeply discussed as the modification strategies to improve 2D material catalyst supports for AORs. Finally, the challenges and perspectives of 2D material-based electrocatalysts for AORs are outlined. This review will promote further efforts in the development of electrocatalysts for AORs.

Ternary Rare Earth Alloy Pt3-xIrxSc Nanoparticles Modulate Negatively Charged Pt via Charge Transfer To Facilitate pH-Universal Hydrogen Evolution

Rare earth (RE) elements possess electronic configurations that can provide additional pathways for tailoring the electronic structures of active elements through alloying, making it an important area of exploration in electrocatalysis. However, the large negative redox potential between RE and Pt has hindered the development of RE nanoalloys. In this study, a solid-phase synthesis strategy was employed to synthesize ternary Pt3-xIrxSc nanoparticles (NPs). By leveraging the electronegativity difference between Pt (2.28), Ir (2.20), and Sc (1.36), a charge-balance strategy was implemented to stabilize and enhance the catalytic performance of the alloy. The electron transfer from Sc to Pt/Ir results in the latter being negatively charged, and the Ir modifies the electron density of Pt, enabling favorable adsorption of active H species during the hydrogen evolution reaction (HER). Pt2IrSc exhibits enhanced HER activity at all pH values, achieving low overpotentials at 10 mA cm-2 of only 13, 18, and 25 mV in 0.5 M H2SO4, 1 M PBS, and 1 M KOH, respectively. This electrocatalyst also exhibits robust electrocatalytic stability even after 20,000 cycles. This work represents an application of the charge balance strategy to RE nanoalloys, and it is expected to inspire the design and synthesis of highly reactive RE nanoalloys.

Sulfur-Stabilizing Ultrafine High-Entropy Alloy Nanoparticles on MXene for Highly Efficient Ethanol Electrooxidation

High-entropy alloys (HEAs) are significantly promising candidates for heterogeneous catalysis, yet the controllable synthesis of ultrafine HEA nanoparticles (NPs) remains a formidable challenge due to severe thermal sintering during the high-temperature fabrication process. Herein, we report a sulfur-stabilizing strategy to construct ultrafine HEA NPs with an average diameter of 4.02 nm supported on sulfur-modified Ti3C2Tx (S-Ti3C2Tx) MXene, on which the strong interfacial metal-sulfur interactions between HEA NPs and the S-Ti3C2Tx supports significantly increase the interfacial adhesion strength, thus greatly suppressing nanoparticle sintering by retarding both particle migration and metal atom diffusion. The representative quinary PtPdCuNiCo HEA-S-Ti3C2Tx exhibits excellent catalytic performance toward alkaline ethanol oxidation reaction (EOR) with an ultrahigh mass activity of 7.03 A mgPt+Pd-1, which is 4.34 and 5.17 times higher than those of the commercial Pt/C and Pd/C catalysts, respectively. In situ attenuated total reflection-infrared spectroscopy studies reveal that the high intrinsic catalytic activity for the EOR can be ascribed to the synergy of different catalytically active sites of HEA NPs and the well-designed interfacial metal-sulfur interactions.

PEDOT-embellished Ti3C2Tx nanosheet supported Pt-Pd bimetallic nanoparticles as efficient and stable methanol oxidation electrocatalysts

Exploiting high-efficiency and durable electrocatalysts toward the methanol oxidation reaction (MOR) is crucial for the advancement of direct methanol fuel cells (DMFCs). Herein, we demonstrate the loading of platinum-palladium bimetallic nanoparticles (Pt-Pd NPs) onto poly(3,4-ethylenedioxythiophene) (PEDOT)-embellished titanium carbide (Ti3C2Tx) nanosheets as the electrocatalyst (Ti3C2Tx/PEDOT/Pt-Pd) via a facile and rapid chemical reduction-assisted one-pot hydrothermal process. The structural and morphological analyses of Ti3C2Tx/PEDOT/Pt-Pd indicate that the three-dimensional (3D) hybrid structure formed between PEDOT and Ti3C2Tx provides a sizable active surface and more active sites, which enhances the homogeneous dispersion of the Pt-Pd NPs and facilitates mass transfer. The Schottky junctions formed between PEDOT and Pt-Pd NPs contribute to charge transfer. The electronic effects and synergistic interactions between the support and catalyst favor the electrocatalytic activity of the catalyst. The electrochemical test results reveal that the Ti3C2Tx/PEDOT/Pt-Pd catalyst has prominent electrocatalytic capability for the MOR. Compared with Ti3C2Tx/Pt-Pd and commercial Pt/C catalysts, the Ti3C2Tx/PEDOT/Pt-Pd catalyst has a larger electrochemical activity surface area (ECSA = 122 m2 g-1) and higher mass activity (MA = 1445.4 mA mg-1), as well as better CO tolerance and more reliable long-term durability (a peak current density retention of 71% after 5200 s).

Boosting catalytic activity toward methanol oxidation reaction for platinum via heterostructure engineering

Direct methanol fuel cell (DMFC) is hampered by the sluggish methanol oxidation reaction. In this work, we have invited rhodium phosphides (Rh2P) to platinum (Pt) as robust MOR electrocatalyst ascribing the excellent water dissociation capability of Rh2P to generate Pt(OH)ads species to mitigate the CO poisoning. MOR mass activity of Rh2P-Pt/C is enhanced by 2- and 3.5-time with relative to commercial Pt/C and PtRu/C, respectively; additionally, the CO anti-poisoning ability is also boosted by 2.4 folds than Pt/C. The in-situ electrochemical impedance spectroscopy test reveals that the water dissociation is accelerated by Rh2P; moreover, the mutual electronic interplay between Pt and Rh2P contributes to a superior resistance towards electrochemical dissolution and coalescence. The theoretical investigation also indicates that d band center of Pt in Rh2P-Pt is downshifted resulting in a lower CO binding strength.

Photo-Activating Biomimetic Polyoxomolybdate for Boosting Oxygen Evolution in Neutral Electrolytes

Inspired by the metal-oxo cluster structural feature and charge separation behaviour of the oxygen evolving center (OEC) in photosystem II (PS-II) under photoirradiation, a new crystalline photochromic polyoxomolybdate, MV2 [β-Mo8 O26 ] (1, MV=methyl viologen cation), is designed as a biomimetic oxygen evolution reaction (OER) catalyst in neutral electrolytes. After photoinduced electron transfer (PIET) with colour change from colourless to grey, it remains in an ultra-stable charge-separated state over a year under ambient conditions. The observed overpotential at 10 mA ⋅ cm-2 and Tafel slope decrease by 49 mV and 62.8 mV ⋅ dec-1 after coloration, respectively. The outstanding OER performance of the coloured state in neutral electrolytes even outperforms the commercial RuO2 benchmark. Experimental and theoretical studies show that oxygen holes within polyanions after irradiation serve as sites for enhancing direct O-O coupling, thus effectively promoting OER. This is the first successful application of electron-transfer photochromism to realize OER activity gain.

Directional electronic tuning of Ni nanoparticles by interfacial oxygen bridging of support for catalyzing alkaline hydrogen oxidation

Metallic nickel (Ni) is a promising candidate to substitute Pt-based catalysts for hydrogen oxidation reaction (HOR), but huge challenges still exist in precise modulation of the electronic structure to boost the electrocatalytic performances. Herein, we present the use of single-layer Ti3C2Tx MXene to deliberately tailor the electronic structure of Ni nanoparticles via interfacial oxygen bridges, which affords Ni/Ti3C2Tx electrocatalyst with exceptional performances for HOR in an alkaline medium. Remarkably, it shows a high kinetic current of 16.39 mA cmdisk-2 at the overpotential of 50 mV for HOR [78 and 2.7 times higher than that of metallic Ni and Pt/C (20%), respectively], also with good durability and CO antipoisoning ability (1,000 ppm) that are not available for conventional Pt/C (20%) catalyst. The ultrahigh conductivity of single-layer Ti3C2Tx provides fast transmission of electrons for Ni nanoparticles, of which the uniform and small sizes endow them with high-density active sites. Further, the terminated -O/-OH functional groups on Ti3C2Tx directionally capture electrons from Ni nanoparticles via interfacial Ni-O bridges, leading to obvious electronic polarization. This could enhance the Nids-O2p interaction and weaken Nids-H1s interaction of Ni sites in Ni/Ti3C2Txenabling a suitable H-/OH-binding energy and thus enhancing the HOR activity.

Atomically Mo-Doped SnO2-x for efficient nitrate electroreduction to ammonia

Electrochemical NO3--to-NH3 reduction (NO3RR) emerges as an appealing strategy to alleviate contaminated NO3- and generate valuable NH3 simultaneously. However, substantial research efforts are still needed to advance the development of efficient NO3RR catalysts. Herein, atomically Mo-doped SnO2-x with enriched O-vacancies (Mo-SnO2-x) is reported as a high-efficiency NO3RR catalyst, delivering the highest NH3-Faradaic efficiency of 95.5% with a corresponding NH3 yield rate of 5.3 mg h-1 cm-2 at -0.7 V (RHE). Experimental and theoretical investigations reveal that d-p coupled Mo-Sn pairs constructed on Mo-SnO2-x can synergistically enhance the electron transfer efficiency, activate the NO3- and reduce the protonation barrier of rate-determining step (*NO→*NOH), thereby drastically boosting the NO3RR kinetics and energetics.

Simple One-Step Molten Salt Method for Synthesizing Highly Efficient MXene-Supported Pt Nanoalloy Electrocatalysts

MXene-supported noble metal alloy catalysts exhibit remarkable electrocatalytic activity in various applications. However, there is no facile one-step method for synthesizing these catalysts, because the synthesis of MXenes requires a strongly oxidizing environment and the preparation of platinum nanoalloys requires a strongly reducing environment and high temperatures. Hence, achieving coupling in one step is extremely challenging. In this paper, a straightforward one-step molten salt method for preparing MXene-supported platinum nanoalloy catalysts is proposed. The molten salt acts as the reaction medium to dissolve the transition metals and platinum ions at high temperatures. Transition metal ions oxidize the A-site element from its MAX precursor at high temperatures, and the resulting transition metals further reduce platinum ions to form alloys. By coupling Al oxidation and platinum ion reduction using a molten salt solvent, this method directly converts Ti3 AlC2 to a Pt-M@Ti3 C2 Tx catalyst (where M denotes the transition metal). It further offers the possibility of extending the Pt-M phase to binary, ternary, or quaternary platinum-containing nanoalloys and converting the Al-containing MAX phase to Ti2 AlC and Ti3 AlCN. Due to the strong interfacial interaction, the as-prepared Pt-Co@Ti3 C2 Tx is superior to commercial Pt/C (20 wt.%) in the hydrogen evolution reaction.

Highly Efficient Electrochemical Hydrogen Evolution with Ultra-Low Loading of Strongly Adhered Pt Nanoparticles on Carbon

The development of robust electrocatalysts with low platinum content for acidic hydrogen evolution reaction (HER) is paramount for large scale commercialization of proton exchange membrane electrolyzers. Herein, a simple strategy is reported to synthesize a well anchored, low Pt containing Vulcan carbon catalyst using ZnO as a sacrificial template. Pt containing ZnO (PZ) is prepared by a simultaneous borohydride reduction. PZ is then loaded onto Vulcan carbon to produce a very low Pt content electrocatalyst, PZ@VC. PZ@VC with 2 wt.% Pt shows excellent performance for acidic HER in comparison to the commercial Pt/C (20 wt.%) catalyst. PZ@VC with a very low Pt loading shows significantly low η10 and η100 values (15 and 46 mV, respectively). PZ@VC on coating with Nafion (PZ@VC-N) shows further improvement in its performance (η10 of 7 mV, η100 of 28 mV) with ≈300 h of stability (≈10 mA cm-2 ) with only 4 µgPt cm-2 . PZ@VC-N shows a record high mass activity of 71 A mgPt -1 (32 times larger than Pt/C (20 wt.%) at 50 mV of overpotential. Post reaction characterizations reveal Pt nanoparticles are embedded onto VC with no traces of zinc, suggestive of a strong metal-support interaction leading to this high stability at low Pt loading.

Unraveling the Dynamic Processes of Methanol Electrooxidation at Isolated Rhodium Sites by In Situ Electrochemical Scanning Tunneling Microscopy

Materials with isolated single-atom Rh-N4 sites are emerging as promising and compelling catalysts for methanol electrooxidation. Herein, we carried out an in situ electrochemical scanning tunneling microscopy (ECSTM) investigation of the dynamic processes of methanol absorption and catalytic conversion in the rhodium octaethylporphyrin (RhOEP)-catalyzed methanol oxidation reaction at the molecular scale. The high-contrast RhOEP-CH3OH complex formed by methanol adsorption was visualized distinctly in the STM images. The Rh-C adsorption configuration of methanol on isolated rhodium sites was identified on the basis of a series of control experiments and theoretical simulation. The adsorption energy of methanol on RhOEP was obtained from quantitative analysis. In situ ECSTM experiments present an explicit description of the transformation of the intermediate species in the catalytic process. By qualitatively evaluating the rate constants of different stages in the reaction at the microscopic level, we considered the CO transformation/desorption as the critical step for determining the reaction dynamics. Methanol adsorption was found to be correlated with RhOEP oxidation in the initial stage of the reaction, and the dynamic information was revealed unambiguously by in situ potential step experiments. This work provides microscopic results for the catalytic mechanism of Rh-N4 sites for methanol electrooxidation, which is instructive for the rational design of the high-performance catalyst.

Atomic hydrogen-mediated enhanced electrocatalytic hydrodehalogenation on Pd@MXene electrodes

In this study, a Pd@MXene catalyst was synthesized to enhance the electrocatalytic hydrodehalogenation (ECH) of emerging halogenated organic pollutants (HOPs) by improving the dispersibility, catalytic activity, and stability of palladium (Pd). The average size of Pd nanoparticles (NPs) was reduced to 3.62 ± 0.34 nm with a more intensive peak of Pd (111), which facilitated atomic hydrogen (H*) production. The Pd@MX/CC electrode demonstrated superior ECH activity for diclofenac (DCF) degradation, with a reaction rate constant (kobs) 2.48 times higher than that of Pd/CC (without MXene). The satisfactory ECH performance of Pd@MX/CC remained consistent within a wide range of initial DCF concentrations (5-100 mg/L), and no significant ECH attenuation was observed even after up to 10 batches. Furthermore, the high activity of Pd@MX/CC was also observed in the ECH of other halogenated organic pollutants (levofloxacin, tetrabromobisphenol A, and diatrizoate). Density functional theory (DFT) calculations revealed that electronic configuration modulation of the Pd@MXene catalyst optimized binging energies to H* , DCF, and dechlorinated products, thereby enhancing the ECH efficiency of DCF.

Immobilizing ultrasmall Pt nanocrystals on 3D interweaving BCN nanosheet-graphene networks enables efficient methanol oxidation reaction

Currently, the state-of-the-art anode catalysts employed in direct methanol fuel cells (DMFCs) consist of nanosize Pt dispersed on a carbonaceous support; however, the relatively weak Pt-carbon interfacial interactions severely affect their overall electrocatalytic activity and service life. Herein, we demonstrate a convenient and robust stereo-assembly strategy for the efficient immobilization of ultrasmall Pt nanocrystals on 3D interweaving porous B-doped g-C3N4 nanosheet-graphene networks (Pt/BCN-G) by combining thermal annealing and solvothermal processes. This delicate configuration endowed the resulting hybrid nanoarchitecture with unusual textural merits, including 3D crosslinked porous skeletons, well-separated ultrathin nanosheets, rich B and N species, homogeneous Pt dispersion, stable heterointerface, and high electrical conductivity. Consequently, the 3D Pt/BCN-G nanoarchitecture with an optimized composition exhibited a large electrochemically active surface area of up to 121.2 m2 g-1, high mass activity of 1782.2 mA mg-1, superior poison tolerance, and excellent cycling stability towards the electrooxidation of methanol, all of which exceeded that of the reference Pt/graphene, Pt/BCN, Pt/carbon nanotube, Pt/carbon black, and Pt/g-C3N4 catalysts.

Oxygen-Bridged Long-Range Dual Sites Boost Ethanol Electrooxidation by Facilitating C-C Bond Cleavage

Optimizing the interatomic distance of dual sites to realize C-C bond breaking of ethanol is critical for the commercialization of direct ethanol fuel cells. Herein, the concept of holding long-range dual sites is proposed to weaken the reaction barrier of C-C cleavage during the ethanol oxidation reaction (EOR). The obtained long-range Rh-O-Pt dual sites achieve a high current density of 7.43 mA/cm2 toward EOR, which is 13.3 times that of Pt/C, as well as remarkable stability. Electrochemical in situ Fourier transform infrared spectroscopy indicates that long-range Rh-O-Pt dual sites can increase the selectivity of C1 products and suppress the generation of a CO intermediate. Theoretical calculations further disclose that redistribution of the surface-localized electron around Rh-O-Pt can promote direct oxidation of -OH, accelerating C-C bond cleavage. This work provides a promising strategy for designing oxygen-bridged long-range dual sites to tune the activity and selectivity of complicated catalytic reactions.

Abundant Exterior/Interior Active Sites Enable Three-Dimensional PdPtBiTe Dumbbells C-C Cleavage Electrocatalysts for Actual Alcohol Fuel Cells

Developing high-activity electrocatalysts is of great significance for the commercialization of direct alcohol fuel cells (DAFCs), but it still faces challenges. Herein, three-dimensional (3D) porous PdPtBiTe dumbbells (DBs) were successfully fabricated via the visible photoassisted method. The alloying effect, defect-rich surface/interface and nanoscale cavity, and open pores make the 3D PdPtBiTe DBs a comprehensive and remarkable electrocatalyst for the C1-C3 alcohol (ethanol, ethylene glycol, glycerol, and methanol) oxidation reaction (EOR, EGOR, GOR, and MOR, respectively) in an alkaline electrolyte, and the results of in situ Fourier transform infrared spectra revealed a superior C-C bond cleavage ability. The 3D PdPtBiTe DBs exhibit ultrahigh EOR, EGOR, GOR, and MOR mass activities of 25.4, 23.2, 16.8, and 18.3 A mgPd + Pt-1, respectively, considerably surpassing those of the commercial Pt/C and Pd/C. Moreover, the mass peak power densities of 3D PdPtBiTe DBs in actual ethanol, ethylene glycol, glycerol, or methanol fuel cells increase to 409.5, 501.5, 558.0, or 601.3 mW mgPd + Pt-1 in O2, respectively. This study provides a new class of multimetallic nanomaterials as state-of-the-art multifunctional anode electrocatalysts for actual DAFCs.

Boosting the Methanol Oxidation Reaction Activity of Pt-Ru Clusters via Resonance Energy Transfer

The sluggish kinetics of the methanol oxidation reaction (MOR) with PtRu electrocatalyst severely hinder the commercialization of direct methanol fuel cells (DMFCs). The electronic structure of Pt is of significant importance for its catalytic activity. Herein, it is reported that low-cost fluorescent carbon dots (CDs) can regulate the behavior of the D-band center of Pt in PtRu clusters through resonance energy transfer (RET), resulting in a significant increase in the catalytic activity of the catalyst participating in methanol electrooxidation. For the first time, the bifunction of RET is used to provide unique strategy for fabrication of PtRu electrocatalysts, not only tunes the electronic structure of metals, but also provides an important role in anchoring metal clusters. Density functional theory calculations further prove that charge transfer between CDs and Pt promotes the dehydrogenation of methanol on PtRu catalysts and reduces the free energy barrier of the reaction associated with the oxidation of CO* to CO2 . This helps to improve the catalytic activity of the systems participating in MOR. The performance of the best sample is 2.76 times higher than that of commercial PtRu/C (213.0 vs 76.99 mW cm - 2 mg Pt - 1 ${\rm{mW\ cm}}^{ - 2}{\rm{\ mg}}_{{\rm{Pt}}}^{ - 1}$ ). The fabricated system can be potentially used for the efficient fabrication of DMFCs.

Surface passivation for highly active, selective, stable, and scalable CO2 electroreduction

Electrochemical conversion of CO2 to formic acid using Bismuth catalysts is one the most promising pathways for industrialization. However, it is still difficult to achieve high formic acid production at wide voltage intervals and industrial current densities because the Bi catalysts are often poisoned by oxygenated species. Herein, we report a Bi3S2 nanowire-ascorbic acid hybrid catalyst that simultaneously improves formic acid selectivity, activity, and stability at high applied voltages. Specifically, a more than 95% faraday efficiency was achieved for the formate formation over a wide potential range above 1.0 V and at ampere-level current densities. The observed excellent catalytic performance was attributable to a unique reconstruction mechanism to form more defective sites while the ascorbic acid layer further stabilized the defective sites by trapping the poisoning hydroxyl groups. When used in an all-solid-state reactor system, the newly developed catalyst achieved efficient production of pure formic acid over 120 hours at 50 mA cm-2 (200 mA cell current).

Dual roles of sub-nanometer NiO in alkaline hydrogen evolution reaction: breaking the Volmer limitation and optimizing d-orbital electronic configuration

Pt-based nanoclusters toward the hydrogen evolution reaction (HER) remain the most promising electrocatalysts. However, the sluggish alkaline Volmer-step kinetics and the high-cost have hampered progress in developing high-performance HER catalysts. Herein, we propose to construct sub-nanometer NiO to tune the d-orbital electronic structure of nanocluster-level Pt for breaking the Volmer-step limitation and reducing the Pt-loading. Theoretical simulations firstly suggest that electron transfer from NiO to Pt nanoclusters could downshift the Ed-band of Pt and result in the well-optimized adsorption/desorption strength of the hydrogen intermediate (H*), therefore accelerating the hydrogen generation rate. NiO and Pt nanoclusters confined into the inherent pores of N-doped carbon derived from ZIF-8 (Pt/NiO/NPC) were designed to realize the structure of computational prediction and boost the alkaline hydrogen evolution. The optimal 1.5%Pt/NiO/NPC exhibited an excellent HER performance and stability with a low Tafel slope (only 22.5 mv dec-1) and an overpotential of 25.2 mV at 10 mA cm-2. Importantly, the 1.5%Pt/NiO/NPC possesses a mass activity of 17.37 A mg-1 at the overpotential of 20 mV, over 54 times higher than the benchmark 20 wt% Pt/C. Furthermore, DFT calculations illustrate that the Volmer-step could be accelerated owing to the high OH- attraction of NiO nanoclusters, leading to the Pt nanoclusters exhibiting a balance of H* adsorption and desorption (ΔGH* = -0.082 eV). Our findings provide new insights into breaking the water dissociation limit of Pt-based catalysts by coupling with a metal oxide.

Low-Pt Octahedral PtCuCo Nanoalloys: "One Stone, Four Birds" for Oxygen Reduction and Methanol Oxidation Reactions

To find a low-Pt electrocatalyst that is functionally integrated and superior to the state-of-the-art single-Pt electrocatalyst is expectedly a challenge. We have in this study found that the reactivity of the oxygen reduction reaction (ORR) and the methanol oxidation reaction (MOR), in both acidic and alkaline electrolytes (viz., four half-cell reactions), can be modified and greatly enhanced by the electronic and/or synergistic effects of a low-Pt octahedral PtCuCo alloy. For the ORR, the mass activity (MA) of Pt_0.23Cu_0.64Co_0.13/C in an acidic or alkaline electrolyte was 14.3 or 10.7 times that of the commercial Pt/C. For the MOR, the MA of Pt_0.23Cu_0.64Co_0.13/C in an acidic or alkaline electrolyte was 7.2 or 3.4 times that of the commercial Pt/C. In addition, Pt_0.23Cu_0.64Co_0.13/C exhibited an increased durability and CO tolerance, as compared with the commercial Pt/C. Density functional theory calculations demonstrated that the PtCuCo(111) surface can effectively optimize the O* binding energy. This work has successfully shown an example of how both acidic and alkaline ORR and MOR activities can be significantly synchronously enhanced.

Hollow Nitrogen-Doped porous carbon spheres decorated with atomically dispersed Ni-N3 sites for efficient electrocatalytic CO2 reduction

Hollow nitrogen-doped porous carbon spheres (HNCS) with plentiful coordination N sites, high surface area, and superior electrical conductivity are ideal catalyst supports due to their easily access of reactants to active sites and excellent stability. To date, nevertheless, little has been reported on HNCS as supports to metal-single-atomic sites for CO₂ reduction (CO₂R). Here we report our findings in preparation of nickel-single-atom catalysts anchored on HNCS (Ni SAC@HNCS) for highly efficient CO₂R. The obtained Ni SAC@HNCS catalyst exhibits excellent activity and selectivity for the electrocatalytic CO₂-to-CO conversion, achieving a Faradaic efficiency (FE) of 95.2% and a partial current density of 20.2 mA cm^-2. When applied to a flow cell, the Ni SAC@HNCS delivers above 95% FE_CO over a wide potential range and a peak FE_CO of 99%. Further, there is no obvious degradation in FE_CO and the current for CO production during continuous electrocatalysis of 9 h, suggesting good stability of Ni SAC@HNCS.

Urchin-like band-matched Fe2O3@In2S3 hybrid as an efficient photocatalyst for CO2 reduction

Herein, an urchin-like Fe₂O₃@In₂S₃ hybrid composite is designed and synthesized using a facile process. The composite efficiently harvests light in both the ultraviolet and visible regions, and the unique hierarchical structure provides several advantages for photocatalytic applications: (i) a suitable band-matching structure and broadband-light absorbing capacity enable the reduction of CO₂ into hydrocarbon, (ii) the extensive network of interfacial contact between nano-sized Fe₂O₃ and In₂S₃ significantly increases the separation of charge carriers and enhances the utilization of photogenerated electron-hole pairs, and (iii) an abundance of surface oxygen vacancies provide numerous active sites for CO₂ molecule adsorption. The optimized Fe₂O₃@In₂S₃ composite generated CO from the photocatalytic reduction of CO₂ at a rate of 42.83 μmol·g^-1·h^-1, and no signs of deactivation were observed during continued testing for 32 h under 300 W Xe lamp irradiation.

Palladium metallene confined on MXene with increased hydroxyl binding strength for highly efficient ethanol electrooxidation

Rational design and synthesis of high-performance electrocatalysts for ethanol oxidation reaction (EOR) is crucial to large-scale commercialization of direct ethanol fuel cells, but it is still an incredible challenge. Herein, a unique Pd metallene/Ti3C2Tx MXene (Pdene/Ti3C2Tx)-supported electrocatalyst is constructed via an in-situ growth approach for high-efficiency EOR. The resulting Pdene/Ti3C2Tx catalyst achieves an ultrahigh mass activity of 7.47 A mgPd-1 under alkaline condition, as well as high tolerance to CO poisoning. In situ attenuated total reflection-infrared spectroscopy studies combined with density functional theory calculations reveal that the excellent EOR activity of Pdene/Ti3C2Tx catalyst is attributed to the unique and stable interfaces which reduce the reaction energy barrier of *CH3CO intermediate oxidation and facilitate oxidative removal of CO poisonous species by increasing the Pd-OH binding strength.

Amorphous TiOx Stabilized Intermetallic Pt3Ti Nanocatalyst for Methanol Oxidation Reaction

Intermetallic compounds, featuring atomically ordered structures, have emerged as a class of promising electrocatalysts for fuel cells. However, it remains a formidable challenge to controllably synthesize Pt-based intermetallics during the essential high-temperature annealing process as well as stabilize the nanoparticles (NPs) during the electrocatalytic process. Herein, we demonstrated a Ketjen black supported intermetallic Pt₃Ti nanocatalyst coupled with amorphous TiO_x species (Pt₃Ti-TiO_x/KB). The TiO_x can not only confine Pt₃Ti NPs during the synthesis and electrocatalytic process by a strong metal-oxide interaction but also promote the water dissociation for generating more OH species, thus facilitating the conversion of CO_ad. The Pt₃Ti-TiO_x/KB showed a significantly enhanced mass activity (2.15 A mg_Pt^-1) for the methanol oxidation reaction, compared with Pt₃Ti/KB and Pt/C, and presented an impressively high mass activity retention (∼71%) after the durability test. This work provides an effective strategy of coupling Pt-based intermetallics with functional oxides for developing highly performed electrocatalysts.

Engineering the highly efficient heterogeneous catalyst based on PdCu nanoalloy and nitrogen-doped Ti3C2Tx MXene for ethanol electrooxidation

Improving the electrocatalytic performance by modulating the surface and interface electronic structure of noble metals is still a research hotspot in electrocatalysis. Herein, we prepared the heterogeneous catalyst based on the well-dispersed PdCu nanoalloy and the N-doped Ti₃C₂T_x MXene support (PdCu/N-Ti₃C₂T_x) via in situ growth of PdCu nanoparticles on the fantastic N-Ti₃C₂T_x sheets. By exploring the electrocatalytic properties of ethanol oxidation reaction (EOR), the composition optimized Pd₁Cu₁/N-Ti₃C₂T_x delivers higher mass activity/specific activity/intrinsic activity (2200.7 mA mg_Pd^-1/13.1 mA cm^-2/2.2 s^-1), anti-poisoning ability and stability than those of Pd/N-Ti₃C₂T_x, Pd₁Cu₁/Ti₃C₂T_x and commercial Pd/C, which can be attributed to the modified surface electronic features of Pd by the participation of Cu atoms and N-Ti₃C₂T_x MXene, as well as the "metal-carrier" effect between the PdCu nanoalloy and N-Ti₃C₂T_x heterogeneous interface. Furthermore, the conductivity of N-Ti₃C₂T_x MXene can be improved by N-doping, and the abundant terminal groups (-O, -OH, -F and N) on the N-Ti₃C₂T_x surface can promote the electron exchange between PdCu and N-Ti₃C₂T_x. This work provides an effective strategy for engineering heterogeneous electrocatalysts for enhanced electrocatalytic EOR by adjusting the interfacial electronic structure of noble metals.

Hierarchical N-doped carbon nanofiber-loaded NiCo alloy nanocrystals with enhanced methanol electrooxidation for alkaline direct methanol fuel cells

The high catalytic activity of non-precious metals in alkaline media opens a new direction for the development of alkaline direct methanol fuel cell (ADMFC) electrocatalysts. Herein, a highly dispersed N-doped carbon nanofibers (CNFs) -loaded NiCo non-precious metal alloy electrocatalyst based on metal-organic frameworks (MOFs) was prepared, which conferred excellent methanol oxidation activity and resistance to carbon monoxide (CO) poisoning through a surface electronic structure modulation strategy. The porous electrospun polyacrylonitrile (PAN) nanofibers and the P-electron conjugated structure of polyaniline chains provide fast charge transfer channels, enabling electrocatalysts with abundant active sites and efficient electron transfer. The optimized NiCo/N-CNFs@800 was tested as an anode catalyst for ADMFC single cell and exhibited a power density of 29.15 mW cm^-2. Due to the fast charge transfer and mass transfer brought by its one-dimensional porous structure and the synergistic effect between NiCo alloy, NiCo/N-CNFs@800 is expected to be an economical, efficient and CO-resistant methanol oxidation reaction (MOR) electrocatalyst.

Subnanoscale Dual-Site Pd-Pt Layers Make PdPtCu Nanocrystals CO-Tolerant Bipolar Effective Electrocatalysts for Alcohol Fuel Cell Devices

Finding a high-performance low-Pt bipolar electrocatalyst in actual direct alcohol fuel cells (DAFCs) remains challenging and desirable. Here, we developed a crystalline PdPtCu@amorphous subnanometer Pd-Pt "dual site" layer core-shell structure for the oxygen reduction reaction (ORR) and alcohol (methanol, ethylene glycol, glycerol, and their mixtures) oxidation reaction (AOR) in an alkaline electrolyte (denoted D-PdPtCu). The prepared D-PdPtCu/C achieved a direct 4-electron ORR pathway, a full oxidation pathway for AOR, and high CO tolerance. The ORR mass activity (MA) of D-PdPtCu/C delivered a 52.8- or 59.3-fold increase over commercial Pt/C or Pd/C, respectively, and no activity loss after 20000 cycles. The D-PdPtCu/C also exhibited much higher AOR MA and stability than Pt/C or Pd/C. Density functional theory revealed the intrinsic nature of a subnanometer Pd-Pt "dual site" surface for ORR and AOR activity enhancement. The D-PdPtCu/C as an effective bipolar electrocatalyst yielded higher peak power densities than commercial Pt/C in actual DAFCs.