Synergistic Effect in a Metal-Organic Framework Boosting the Electrochemical CO2 Overall Splitting

Highly Efficient Electrosynthesis of Urea from CO2 and Nitrate by a Metal-Organic Framework with Dual Active Sites

Electrosynthesis of urea from CO2 and NO3 - is a sustainable alternative to energy-intensive industrial processes. The main challenge hindering the progress of this technology lies in the development of advanced electrocatalysts that efficiently utilize abundant, low-cost CO2 and nitrogen sources to yield urea with both high Faradaic efficiency (FE) and current density. In this work, we designed and prepared a new two-dimensional metal-organic framework (MOF), namely PcNi-Fe-O, constructed by nickel-phthalocyanine (NiPc) ligands and square-planar FeO4 nodes, as the electrocatalyst for urea electrosynthesis. PcNi-Fe-O exhibits remarkable performance to yield urea at a high current density of 10.1 mA cm-2 with a high FE(urea) of 54.1 % in a neutral aqueous solution, surpassing those of most reported electrocatalysts. No obvious performance degradation was observed over 20 hours of continuous operation at the current density of 10.1 mA cm-2. By expanding the electrode area to 25 cm2 and operating for 8 hours, we obtained 0.164 g of high-purity urea, underscoring its potential for industrial applications. Mechanism study unveiled the enhanced performance might be ascribed to the synergistic interaction between NiPc and FeO4 sites. Specifically, NH3 produced at the FeO4 site can efficiently migrate and couple with the *NHCOOH intermediate adsorbed on the urea-producing site (NiPc). This synergistic effect results in a lower energy barrier for C-N bond formation than those of the reported catalysts with single active sites.

Copper dual-doping strategy of porous carbon nanofibers and nickel fluoride nanorods as bi-functional oxygen electrocatalysis for effective zinc-air batteries

Designing and developing efficient, low-cost bi-functional oxygen electrocatalysts is essential for effective zinc-air batteries. In this study, we propose a copper dual-doping strategy, which involves doping both porous carbon nanofibers (PCNFs) and nickel fluoride nanoparticles with copper alone, successfully preparing copper-doped nickel fluoride (NiF2) nanorods and copper nanoparticles co-modified PCNFs (Cu@NiF2/Cu-PCNFs) as an efficient bi-functional oxygen electrocatalyst. When copper is doped into the PCNFs in the form of metallic nanoparticles, the doped elemental copper can improve the electronic conductivity of composite materials to accelerate electron conduction. Meanwhile, the copper doping for NiF2 can significantly promote the transformation of nickel fluoride nanoparticles into nanorod structures, thus increasing the electrochemical active surface area and enhancing mass diffusion. The Cu-doped NiF2 nanorods also possess an optimized electronic structure, including a more negative d-band center, smaller bandgap width and lower reaction energy barrier. Under the synergistic effect of these advantages, the obtained Cu@NiF2/Cu-PCNFs exhibit outstanding bi-functional catalytic performances, with a low overpotential of 0.68 V and a peak power density of 222 mW cm-2 in zinc-air batteries (ZABs) and stable cycling for 800 h. This work proposes a one-step way based on the dual-doping strategy, providing important guidance for designing and developing efficient catalysts with well-designed architectures for high-performance ZABs.

Bifunctional Catalysts for CO2 Reduction and O2 Evolution: A Pivotal for Aqueous Rechargeable Zn-CO2 Batteries

The quest for the advancement of green energy storage technologies and reduction of carbon footprint is determinedly rising toward carbon neutrality. Aqueous rechargeable Zn-CO2 batteries (ARZCBs) hold the great potential to encounter both the targets simultaneously, i.e., green energy storage and CO2 conversion to value-added chemicals/fuels. The major descriptor of ARZCBs efficiency is allied with the reactions occurring at cathode during discharging (CO2 reduction) and charging (O2 evolution) which own different fundamental mechanisms and hence mandate the employment of two different catalysts. This presents an overall complex and expensive battery system which requires a concrete solution, while the development and application of a bifunctional cathode catalyst toward both reactions could reduce the complexity and cost and thus can be a pivotal for ARZCBs. However, despite the increasing research interest and ongoing research, a systematic evaluation of bifunctional catalysts is rarely reported. In this review, the need of bifunctional cathode catalysts for ARZCBs and associated challenges with strategies have been critically assessed. A detailed progress examination and understanding toward designing of bifunctional catalyst for ARZCBs have been provided. This review will enlighten the future research approaching boosted performance of ARZCBs through the development of efficient bifunctional cathode catalysts.

Electrocatalytic Reduction of Carbon Dioxide in Acidic Electrolyte with Superior Performance of a Metal-Covalent Organic Framework over Metal-Organic Framework

CO2 electroreduction (CO2RR) to generate valuable chemicals in acidic electrolytes can improve the carbon utilization rate in comparison to that under alkaline conditions. However, the thermodynamically more favorable hydrogen evolution reaction under an acidic electrolyte makes the CO2RR a big challenge. Herein, robust metal phthalocyanine(Pc)-based (M = Ni, Co) conductive metal-covalent organic frameworks (MCOFs) connected by strong metal tetraaza[14]annulene (TAA) linkage, named NiPc-NiTAA and NiPc-CoTAA, are designed and synthesized to apply in the CO2RR in acidic electrolytes for the first time. The optimal NiPc-NiTAA exhibited an excellent Faradaic efficiency (FECO) of 95.1% and a CO partial current density of 143.0 mA cm-2 at -1.5 V versus the reversible hydrogen electrode in an acidic electrolyte, which is 3.1 times that of the corresponding metal-organic framework NiPc-NiN4. The comparison tests and theoretical calculations reveal that in-plane full π-d conjugation MCOF with a good conductivity of 3.01 × 10-4 S m-1 accelerates migration of the electrons. The NiTAA linkage can tune the electron distribution in the d orbit of metal centers, making the d-band center close to the Fermi level and then activating CO2. Thus, the active sites of NiPc and NiTAA collaborate to reduce the *COOH formation energy barrier, favoring CO production in an acid electrolyte. It is a helpful route for designing outstanding conductive MCOF materials to enhance CO2 electrocatalysis under an acidic electrolyte.

Iron Active Center Coordination Reconstruction in Iron Carbide Modified on Porous Carbon for Superior Overall Water Splitting

In this work, a novel liquid nitrogen quenching strategy is engineered to fulfill iron active center coordination reconstruction within iron carbide (Fe3C) modified on biomass-derived nitrogen-doped porous carbon (NC) for initiating rapid hydrogen and oxygen evolution, where the chrysanthemum tea (elm seeds, corn leaves, and shaddock peel, etc.) is treated as biomass carbon source within Fe3C and NC. Moreover, the original thermodynamic stability is changed through the corresponding force generated by liquid nitrogen quenching and the phase transformation is induced with rich carbon vacancies with the increasing instantaneous temperature drop amplitude. Noteworthy, the optimizing intermediate absorption/desorption is achieved by new phases, Fe coordination, and carbon vacancies. The Fe3C/NC-550 (550 refers to quenching temperature) demonstrates outstanding overpotential for hydrogen evolution reaction (26.3 mV at -10 mA cm-2) and oxygen evolution reaction (281.4 mV at 10 mA cm-2), favorable overall water splitting activity (1.57 V at 10 mA cm-2). Density functional theory (DFT) calculations further confirm that liquid nitrogen quenching treatment can enhance the intrinsic electrocatalytic activity efficiently by optimizing the adsorption free energy of reaction intermediates. Overall, the above results authenticate that liquid nitrogen quenching strategy open up new possibilities for obtaining highly active electrocatalysts for the new generation of green energy conversion systems.

Fabrication of Nickel Single Atoms with Ionic Liquids by Only One-Step Pyrolysis for CO2 Electroreduction

Single-atom catalysts (SACs) are appealing for carbon dioxide (CO2) electroreduction with the utmost advantages; however, their preparation is still challenging because of the complicated procedure. Here, a novel Ni-based single-atom catalyst (Ni-BB-BD) is constructed from raw materials, [BMIM]BF4, [BMIM]DCN, and NiCl2·6H2O, directly without any precursor by only one-step pyrolysis. Ni-BB-BD achieves a maximum carbon monoxide Faradaic efficiency (FECO) of 96.5% at -0.8 V vs RHE, as well as long-term stability over 16 h. High current density up to -170.6 mA cm-2 at -1.0 V vs RHE is achieved in the flow cell along with a CO selectivity of 97.7%. It is identified that [BMIM]BF4 is the nitrogen source, while [BMIM]DCN is mainly taken as the carbon source. Theoretical studies have revealed that the rich nitrogen content, especially for the uncoordinated nitrogen, plays a critical role in lowering rate-limiting barrier height. This work develops a facile and effective strategy to prepare the SACs.

Strain Engineering for Electrocatalytic Overall Water Splitting

Strain engineering is a novel method that can achieve superior performance for different applications. The lattice strain can affect the performance of electrochemical catalysts by changing the binding energy between the surface-active sites and intermediates and can be affected by the thickness, surface defects and composition of the materials. In this review, we summarized the basic principle, characterization method, introduction strategy and application direction of lattice strain. The reactions on hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) are focused. Finally, the present challenges are summarized, and suggestions for the future development of lattice strain in electrocatalytic overall water splitting are put forward.

Br, O-Modified Cu(111) Interface Promotes CO2 Reduction to Multicarbon Products

Electrochemical reduction of CO2 to multicarbon (C2+) products with added value represents a promising strategy for achieving a carbon-neutral economy. Precise manipulation of the catalytic interface is imperative to control the catalytic selectivity, particularly toward C2+ products. In this study, a unique Cu/UIO-Br interface is designed, wherein the Cu(111) plane is co-modified simultaneously by Br and O from UIO-66-Br support. Such Cu/UIO-Br catalytic interface demonstrates a superior Faradaic efficiency of ≈53% for C2+ products (ethanol/ethylene) and the C2+ partial current density reached 24.3 mA cm-2 in an H-cell electrolyzer. The kinetic isotopic effect test, in situ attenuated total reflection Fourier transform infrared spectroscopy and density functional theory calculations have been conducted to elucidate the catalytic mechanism. The Br, O co-modification on the Cu(111) interface enhanced the adsorption of CO2 species. The hydrogen-bond effect from the doped Br atom regulated the kinetic processes of *H species in CO2RR and promoted the formation of *COH intermediate. The formed *COH facilitates the *CO-*COH coupling and promotes the C2+ selectivity finally. This comprehensive investigation not only provides an in-depth study and understanding of the catalytic process but also offers a promising strategy for designing efficient Cu-based catalysts with exceptional C2+ products.

Construction of Co-ZIF-derived CoS2@Cu hollow heterogeneous nanotube array for the detection of hydrazine in environmental water samples

As a neurotoxin, it is necessary to establish a low cost, stable and sensitive method for the quantitative detection of hydrazine. Using Co-ZIF (zeolite imidazole framework) nanorods as precursor, CoS2 hollow nanotube array heterogeneous structure loaded with Cu nanoparticles were prepared on carbon cloth (CC) by etching, calcination and plasma magnetron sputtering (CoS2@Cu HNTA/CC). As a self-supporting electrode, its hollow heterogeneous structure provides a large area of electron transfer channel for the oxidation of the food pollutant hydrazine. In addition, bimetallic synergies and in situ N doping regulated the electronic structure of CoS2@Cu HNTA/CC, and thus significantly improved the electrical conductivity and catalytic activity. As an efficient hydrazine sensor with a wide linear range of 1 μM L-1-10 mM (1 μM-1 mM and 1 mM-10 mM), its sensitivity and the limit of detection are 7996 μA mM-1 cm-2, 3772 μA mM-1 cm-2 and 0.276 μM (S/N = 3), respectively. This study provides a new strategy for the construction of MOFs (Metal Organic Framework)-derived bimetallic composites and their application in electrochemical sensing.

Steering CO2 Electroreduction Selectivity U-Turn to Ethylene by Cu-Si Bonded Interface

Copper (Cu), with the advantage of producing a deep reduction product, is a unique catalyst for the electrochemical reduction of CO2 (CO2RR). Designing a Cu-based catalyst to trigger CO2RR to a multicarbon product and understanding the accurate structure-activity relationship for elucidating reaction mechanisms still remain a challenge. Herein, we demonstrate a rational design of a core-shell structured silica-copper catalyst (p-Cu@m-SiO2) through Cu-Si direct bonding for efficient and selective CO2RR. The Cu-Si interface fulfills the inversion in CO2RR product selectivity. The product ratio of C2H4/CH4 changes from 0.6 to 14.4 after silica modification, and the current density reaches a high of up to 450 mA cm-2. The kinetic isotopic effect, in situ attenuated total reflection Fourier-transform infrared spectra, and density functional theory were applied to elucidate the reaction mechanism. The SiO2 shell stabilizes the *H intermediate by forming Si-O-H and inhibits the hydrogen evolution reaction effectively. Moreover, the direct-bonded Cu-Si interface makes bare Cu sites with larger charge density. Such bare Cu sites and Si-O-H sites stabilized the *CHO and activated the *CO, promoting the coupling of *CHO and *CO intermediates to form C2H4. This work provides a promising strategy for designing Cu-based catalysts with high C2H4 catalytic activity.

Tuning Coordination Structures of Zn Sites Through Symmetry-Breaking Accelerates Electrocatalysis

Manipulating the coordination environment of individual active sites in a precise manner remains an important challenge in electrocatalytic reactions. Herein, inspired by theoretical predictions, a facile procedure to synthesize a series of symmetry-breaking zinc metal-organic framework (Zn-MOF) catalysts with well-defined structures is presented. Benefiting from the optimized coordination microenvironment regulated by symmetry-breaking, Zn-N2 S2 -MOF exhibits the best performance of nitrogen (N2 ) reduction reaction (NRR) with NH3 yield rate of 25.07 ± 1.57 µg h-1  cm-2 and Faradaic efficiency of 44.57 ± 2.79% compared with reported Zn-based NRR catalysts. X-ray absorption near-edge structure shows that the symmetry-breaking distorts the coordination environment and modulates the delocalized electrons around the Zn sites, which favors the formation of unpaired low-valence Znδ+ , thereby facilitating the adsorption/activation of N2 . Theoretical calculations elucidate that low-valence Znδ+ in Zn-N2 S2 -MOF can effectively lower the energy barrier of potential determining step, promoting the kinetics and boosting the NRR activity. This work highlights the relationship between the precise coordination environment of metal sites and the catalytic activity, which offers insightful guidance for rationally designing high-efficiency electrocatalysts.

Complete Glucose Electrooxidation Enabled by Coordinatively Unsaturated Copper Sites in Metal-Organic Frameworks

The electrocatalytic oxidation of glucose plays a vital role in biomass conversion, renewable energy, and biosensors, but significant challenges remain to achieve high selectivity and high activity simultaneously. In this study, we present a novel approach for achieving complete glucose electrooxidation utilizing Cu-based metal-hydroxide-organic framework (Cu-MHOF) featuring coordinatively unsaturated Cu active sites. In contrast to traditional Cu(OH)2 catalysts, the Cu-MHOF exhibits a remarkable 40-fold increase in electrocatalytic activity for glucose oxidation, enabling exclusive oxidation of glucose into formate and carbonate as the final products. The critical role of open metal sites in enhancing the adsorption affinity of glucose and key intermediates was confirmed by control experiments and density functional theory simulations. Subsequently, a miniaturized nonenzymatic glucose sensor was developed showing superior performance with a high sensitivity of 214.7 μA mM-1  cm-2 , a wide detection range from 0.1 μM to 22 mM, and a low detection limit of 0.086 μM. Our work provides a novel molecule-level strategy for designing catalytically active sites and could inspire the development of novel metal-organic framework for next-generation electrochemical devices.

Ag+ -Doped InSe Nanosheets for Membrane Electrode Assembly Electrolyzer toward Large-Current Electroreduction of CO2 to Ethanol

It is an appealing approach to CO2 utilization through CO2 electroreduction (CO2 ER) to ethanol at high current density; however, the commonly used Cu-based catalysts cannot sustain large current during CO2 ER despite their capability for ethanol production. Herein, we report that Ag+ -doped InSe nanosheets with Se vacancies can address this grand challenge in a membrane electrode assembly (MEA) electrolyzer. As revealed by our experimental characterization and theoretical calculation, the Ag+ doping, which can tailor the electronic structure of InSe while diversifying catalytically active sites, enables the formation of key reaction intermediates and their sequential evolution into ethanol. More importantly, such a material can well work for large-current conditions in MEA electrolyzers with In2+ species stabilized via electron transfer from Ag to Se. Remarkably, in an MEA electrolyzer by coupling cathodic CO2 ER with anodic oxygen evolution reaction (OER), the optimal catalyst exhibits an ethanol Faradaic efficiency of 68.7 % and a partial current density of 186.6 mA cm-2 on the cathode with a full-cell ethanol energy efficiency of 26.1 % at 3.0 V. This work opens an avenue for large-current production of ethanol from CO2 with high selectivity and energy efficiency by rationally designing electrocatalysts.

Self-Accelerating Effect in a Covalent-Organic Framework with Imidazole Groups Boosts Electroreduction of CO2 to CO

Solvent effect plays an important role in catalytic reaction, but there is little research and attention on it in electrochemical CO2 reduction reaction (eCO2 RR). Herein, we report a stable covalent-organic framework (denoted as PcNi-im) with imidazole groups as a new electrocatalyst for eCO2 RR to CO. Interestingly, compared with neutral conditions, PcNi-im not only showed high Faraday efficiency of CO product (≈100 %) under acidic conditions (pH ≈ 1), but also the partial current density was increased from 258 to 320 mA cm-2 . No obvious degradation was observed over 10 hours of continuous operation at the current density of 250 mA cm-2 . The mechanism study shows that the imidazole group on the framework can be protonated to form an imidazole cation in acidic media, hence reducing the surface work function and charge density of the active metal center. As a result, CO poisoning effect is weakened and the key intermediate *COOH is also stabilized, thus accelerating the catalytic reaction rate.

Photocoupled Electroreduction of CO2 over Photosensitizer-Decorated Covalent Organic Frameworks

Introducing an external visible-light field would be a promising strategy to improve the activity of the electrocatalytic CO2 reduction reaction (CO2RR), but it still remains a challenge due to the short excited-state lifetime of active sites. Herein, Ru(bpy)3Cl2 struts as powerful photosensitive donors were immobilized into the backbones of Co-porphyrin-based covalent organic frameworks (named Co-Bpy-COF-Rux, x is the molar ratio of Ru and Co species, x = 1/2 and 2/3) via coordination bonds, for the photo-coupled CO2RR to produce CO. The optimal Co-Bpy-COF-Ru1/2 displays a high CO Faradaic efficiency of 96.7% at -0.7 V vs reversible hydrogen electrode (RHE) and a CO partial current density of 16.27 mA cm-2 at -1.1 V vs RHE under the assistance of light, both of which were far surpassing the values observed in the dark. The significantly enhanced activity is mainly attributed to the incorporation of a Ru(bpy)3Cl2 donor with long excited-state lifetime and concomitantly giant built-in electric field in Co-Bpy-COF-Ru1/2, which efficiently accelerate the photo-induced electron transfer from Ru(bpy)3Cl2 to the cobalt-porphyrin under the external light. Thus, the cobalt-porphyrin active sites have a longer excited-state lifetime to lower the rate-determining steps' energy occurring during the actual photo-coupled electrocatalytic CO2RR process. This is the first work of porphyrin-based COFs for photo-coupled CO2RR, opening a new frontier for the construction of efficient photo-coupled electrocatalysts.

Regulation of Electrocatalytic Behavior by Axial Oxygen Enhances the Catalytic Activity of CoN4 Sites for CO2 Reduction

Recent studies have found that the existence of oxygen around the active sites may be essential for efficient electrochemical CO2 -to-CO conversion. Hence, this work proposes the modulation of oxygen coordination and investigates the as-induced catalytic behavior in CO2 RR. It designs and synthesizes conjugated phthalocyanine frameworks catalysts (CPF-Co) with abundant CoN4 centers as an active source, and subsequently modifies the electronic structure of CPF-Co by introducing graphene oxide (GO) with oxygen-rich functional groups. A systematic study reveals that the axial coordination between oxygen and the catalytic sites could form an optimized O-CoN4 structure to break the electron distribution symmetry of Co, thus reducing the energy barrier to the activation of CO2 to COOH*. Meanwhile, by adjusting the content of oxygen, the proper supports can also facilitate the charge transfer efficiency between the matrix layer and the catalytic sites. The optimized CPF-Co@LGO exhibits a high TOF value (2.81 s-1 ), CO selectivity (97.6%) as well as stability (24 h) at 21 mA cm-2 current density. This work reveals the modulation of oxygen during CO2 RR and provides a novel strategy for the design of efficient electrocatalysts, which may inspire new exploration and principles for CO2 RR.