Influence of backbone conformational rigidity in temperature-sensitive amphiphilic supramolecular assemblies

Temperature Control of the Self-Assembly Process of 4-Aminoquinoline Amphiphile: Selective Construction of Perforated Vesicles and Nanofibers, and Structural Restoration Capability

The construction of diverse and distinctive self-assembled structures in water, based on the control of the self-assembly processes of artificial small molecules, has received considerable attention in supramolecular chemistry. Cage-like perforated vesicles are distinctive and interesting self-assembled structures. However, the development of self-assembling molecules that can easily form perforated vesicles remains challenging. This paper reports a lower critical solution temperature (LCST) behavior-triggered self-assembly property of a 4-aminoquinoline (4-AQ)-based amphiphile with a tetra(ethylene glycol) chain, in HEPES buffer (pH 7.4). This property allows to form perforated vesicles after heating at 80 °C (> LCST). The self-assembly process of the 4-AQ amphiphile can be controlled by heating at 80 °C (> LCST) or 60 °C (< LCST). After cooling to room temperature, the selective construction of the perforated vesicles and nanofibers was achieved from the same 4-AQ amphiphile. Furthermore, the perforated vesicles exhibited slow morphological transformation into intertwined-like nanofibers but were easily restored by brief heating above the LCST.

Thermosensitive core-rigid micelles of monomethoxy poly(ethylene glycol)-deoxy cholic acid

Background

Thermosensitive micelles with rigid cores that exhibit a reversible lower critical solution temperature at 30–35 °C can be applied for drug delivery.

Method

Hydrophilic monomethoxy poly(ethylene glycol) was conjugated to hydrophobic deoxycholic acid to prepare monomethoxy poly(ethylene glycol)-deoxycholic acid (mPEG-DC). Micelle formation and thermosensitive solution behavior were studied using various methods, including hydrophobic dye solubilization, transmission electron microscopy, dynamic light scattering, turbidity measurement, microcalorimetry, and ¹H-NMR spectroscopy. Drug release from the thermosensitive micelles was demonstrated using estradiol, a model drug.

Results

The mPEG-DC formed micelles with a critical micelle concentration of 0.05 wt.% and an average size of 15 nm. Aqueous mPEG-DC solutions exhibit a lower critical solution temperature (LCST) that is independent of concentration and reversible over heating and cooling cycles. The LCST transition is an entropically driven process involving dehydration of the PEG shell. The thermosensitive mPEG-DC micelles with rigid DC cores were applied as an estradiol delivery system in which estradiol was released, without initial burst, over the 16 days in a diffusion-controlled manner.

Conclusions

This study suggests that mPEG-DCs form thermosensitive micelles with rigid cores that can function as an excellent diffusion-controlled hydrophobic drug delivery system without initial burst release.

Graphical Abstract

Thermosensitive core-rigid micelles of monomethoxy poly(ethylene glycol)-deoxy cholic acid

Supplementary Information

The online version contains supplementary material available at 10.1186/s40824-022-00263-9.

Controlling Liquid Crystal Configuration and Phase Using Multiple Molecular Triggers

Liquid crystals are able to transform a local molecular interaction into a macroscopic change of state, making them a valuable "smart" material. Here, we investigate a novel polymeric amphiphile as a candidate for molecular triggering of liquid crystal droplets in aqueous background. Using microscopy equipped with crossed polarizers and optical tweezers, we find that the monomeric amphiphile is able to trigger both a fast phase change and then a subsequent transition from nematic to isotropic. We next include sodium dodecyl sulfate (SDS), a standard surfactant, with the novel amphiphilic molecules to test phase transitioning when both were present. As seen previously, we find that the activity of SDS at the surface can result in configuration changes with hysteresis. We find that the presence of the polymeric amphiphile reverses the hysteresis previously observed during such transitions. This work demonstrates a variety of phase and configuration changes of liquid crystals that can be controlled by multiple exogenous chemical triggers.

Molecular bases for temperature sensitivity in supramolecular assemblies and their applications as thermoresponsive soft materials

Thermoresponsive supramolecular assemblies have been extensively explored in diverse formats, from injectable hydrogels to nanoscale carriers, for a variety of applications including drug delivery, tissue engineering and thermo-controlled catalysis. Understanding the molecular bases behind thermal sensitivity of materials is fundamentally important for the rational design of assemblies with optimal combination of properties and predictable tunability for specific applications. In this review, we summarize the recent advances in this area with a specific focus on the parameters and factors that influence thermoresponsive properties of soft materials. We summarize and analyze the effects of structures and architectures of molecules, hydrophilic and lipophilic balance, concentration, components and external additives upon the thermoresponsiveness of the corresponding molecular assemblies.

Re-entrant Photoinduced Morphological Transformation and Temperature-Dependent Kinetic Products of a Rectangular Amphiphilic Diarylethene Assembly

An amphiphilic rectangular-shaped photochromic diarylethene bearing two hydrophobic alkyl chains and two hydrophilic tri(ethylene glycol) chains was synthesized, and its photoinduced morphological transformation in water was investigated. Two unexpected phenomena were revealed in the course of the experiments: a re-entrant photoinduced macroscopic morphological transformation and temperature-dependent kinetic products of supramolecular assembly. When the pure closed-ring isomer was dispersed in water, a re-entrant photoinduced morphological transformation, that is, a photoinduced transition from the hydrated phase to the dehydrated phase and then back to the hydrated phase, was observed by optical microscopy upon irradiation with green light at 20 °C; this was interpreted by the V-shaped phase diagram of the LCST transition. The aqueous assembly of the pure closed-ring isomer was controlled by changing the temperature; specifically, rapid cooling to 15 and 5 °C gave J and H aggregates, respectively, as the kinetic products. The thermodynamic product at both temperatures was a mixture of mostly H aggregate with a small amount of J aggregate. This behavior was rationalized by the temperature-dependent potential energy surface of the supramolecular assembly.

Understanding functional group and assembly dynamics in temperature responsive systems leads to design principles for enzyme responsive assemblies

Understanding the molecular rules behind the dynamics of supramolecular assemblies is fundamentally important for the rational design of responsive assemblies with tunable properties. Herein, we report that the dynamics of temperature-sensitive supramolecular assemblies is not only affected by the dehydration of oligoethylene glycol (OEG) motifs, but also by the thermally-promoted molecular motions. These counteracting features set up a dynamics transition point (DTP) that can be modulated with subtle variations in a small hydrophobic patch on the hydrophilic face of the amphiphilic assembly. Understanding the structural factors that control the dynamics of the assemblies leads to rational design of enzyme-responsive assemblies with tunable temperature responsive profiles.

Surface ligand rigidity modulates lipid raft affinity of ultra-small hydrophobic nanoparticles: insights from molecular dynamics simulations

Differential preferences between lipids and proteins drive the formation of dynamical nanoscale membrane domains (lipid rafts), which play key roles in the proper functioning of cells. On the other hand, due to the potent physicochemical properties of nanoparticles (NPs), they have been widely used in drug delivery, bio-imaging and regulating various essential biological processes of the cells. Hence, in this work, we aim to design ultra-small hydrophobic NPs with tunable raft affinity, which is supposed to partition into the hydrophobic region of lipid membranes and be able to regulate the dynamics of the lipid raft domains. A series of μs-scale coarse-grained molecular dynamics simulations and umbrella sampling free energy calculations were performed to investigate the role of surface ligand rigidity of ultra-small hydrophobicNPs in their raft affinity. Our results indicated that the preferred localization of NPs can be tuned by adjusting their surface ligand rigidity. Generally, rigid NPs tended to target the raft domain, while soft NPs preferred the interface of the raft and non-raft domains. The free energy analysis further indicated that the surface ligand rigidity of NPs can enhance their targeting to lipid raft domains. Besides, we found that these ultra-small NPs had no significant effects on the phase separation of the lipid membrane although they might cause some local interference to surrounding lipids. These results indicate that the targeting to the lipid raft domain can be achieved by the surface ligand rigidity of NPs, which provides helpful insights for further regulations of lipid raft-mediated biological processes.

Cooperatively assembled liquid crystals enable temperature-controlled Förster resonance energy transfer

Balancing the rigidity of a π-conjugated structure for strong emission and the flexibility of liquid crystals for self-assembly is the key to realizing highly emissive liquid crystals (HELCs). Here we show that (1) integrating organization-induced emission into dual molecular cooperatively-assembled liquid crystals, (2) amplifying mesogens, and (3) elongating the spacer linking the emitter and the mesogen create advanced materials with desired thermal–optical properties. Impressively, assembling the fluorescent acceptor Nile red into its host donor designed according to the aforementioned strategies results in a temperature-controlled Förster resonance energy transfer (FRET) system. Indeed, FRET exhibits strong S-curve dependence as temperature sweeps through the liquid crystal phase transformation. Such thermochromic materials, suitable for dynamic thermo-optical sensing and modulation, are anticipated to unlock new and smart approaches for controlling and directing light in stimuli-responsive devices.

A temperature-sensitive Förster resonance energy transfer system was constructed using a highly emissive liquid crystal co-assembled with Nile red, enabling thermo-optical modulation for controlling and directing light in stimuli-responsive devices.

Direct Observation of Liquid Crystal Droplet Configurational Transitions using Optical Tweezers

Liquid crystals (LCs) are easily influenced by external interactions, particularly at interfaces. When rod-like LC molecules are confined to spherical droplets, they experience a competition between interfacial tension and elastic deformations. The configuration of LCs inside a droplet can be controlled using surfactants that influence the interfacial orientation of the LC molecules in the oil-phase of an oil in water emulsion. Here, we used the surfactant sodium dodecyl sulfate (SDS) to manipulate the orientation of 5CB molecules in a polydisperse emulsion and examined the configuration of the droplets as a function of SDS concentration. We triggered pronounced morphological transitions by altering the SDS concentration while observing an individual LC droplet held in place using an optical tweezer. We compared the experimental configuration changes to predictions from simulations. We observed a hysteresis in the SDS concentration that induced the morphological transition from radial to bipolar and back as well as a fluctuations in the configuration during the transition.

A New Strategy for Reporting Specific Protein Binding Events at Aqueous-Liquid Crystal Interfaces in the Presence of Non-Specific Proteins

Aqueous-liquid crystal (LC) interfaces offer promise as responsive interfaces at which biomolecular recognition events can be amplified into macroscopic signals. However, the design of LC interfaces that distinguish between specific and non-specific protein interactions remains an unresolved challenge. Herein, we report the synthesis of amphiphilic monomers, dimers, and trimers conjugated to sulfonamide ligands via triazole rings, their assembly at aqueous-LC interfaces, and the orientational response of LCs to the interactions of carbonic anhydrase II (CAII) and serum albumin with the oligomer-decorated LC interfaces. Of six oligomers synthesized, only dimers without amide methylation were found to assemble at aqueous interfaces of nematic 4-cyano-4'-pentylbiphenyl (5CB) to induce perpendicular LC orientations. At dimer-decorated LC interfaces, we found that concentrations of CAII less than 4 μM did not measurably perturb the LC but prevented non-specific adsorption and penetration of serum albumin into the dimer-decorated interface that otherwise triggered bright, globular LC optical domains. These experiments and others (including competitive adsorption of CAII, BSA, and lysozyme) support our hypothesis that specific binding of CAII to the dimer prevents LC anchoring transitions triggered by non-specific adsorption of serum albumin. We illustrate the utility of the approach by reporting (i) the relative activity of two small-molecule inhibitors (6-ethoxy-2-benzothiazolesulfonamide and benzenesulfonamide) of CAII to sulfonamide and (ii) proteolytic digestion of a protein (CAII) by thermolysin. Overall, the results in this paper provide new insight into the interactions of proteins at aqueous-LC interfaces and fresh ideas for either blocking non-specific interactions of proteins at surfaces or reporting specific binding events at LC interfaces in the presence of non-specific proteins.

A pH-responsive graftable supramolecular polymer with tailorable surface functionality by orthogonal halogen bonding and hydrogen bonding

Orthogonal halogen (X)-bonding and hydrogen (H)-bonding have been employed for constructing a surface functionalizable supramolecular polymer in water featuring tunable morphology and dual stimuli (pH and temperature) responsive properties.

MUC-1 recognition-based activated drug nanoplatform improves doxorubicin chemotherapy in breast cancer

Tumor-targeted drug delivery systems with stimuli-response drug release have been increasingly used to improve the therapeutic efficacy of antitumor drugs. Here, we report a specific molecular recognition activation drug nanoplatform based on specially designed DNA sensor-capped doxorubicin (DOX)-loaded mesoporous silica nanoparticles (MSNs), designated as specific molecular recognition-activated nanoparticle (SMRAN). DNA sensors on the targeted nanoparticles can trigger DOX release through a conformational switch induced by MUC-1. This causes a significant difference in cell viability between breast cancer MCF-7 and normal breast Hs578bst cells (24.8% and 86.0%). In vivo experiments showed that the tumor volume was reduced 1.5-times in the SMRAN treatment group. Compared with that in the DOX group, due to significantly improved tumor accumulation and retention of DOX. The strategy of the MUC-1 activated drug delivery system is expected to provide a new perspective for clinical application.

Photoinduced repetitive separation of a supramolecular assembly composed of an amphiphilic diarylethene mixture

A supramolecular assembly composed of a two-component mixture of amphiphilic diarylethenes, which have octyloxycarbonyl and N-octylcarbamoyl groups, showed a unique macroscopic transformation upon irradiation with UV light and subsequent standing in the dark. Unlike the pure compounds, the assembly was repetitively separated into a blue sphere and a red-purple sparse structure. Both the blue sphere and the sparse structure turned into colorless spheres upon irradiation with visible light and the divided colorless spheres showed the same response to UV and visible light. Phase diagrams based on the change in absorption spectra upon temperature change suggested that the transformation originates from a LCST transition. In the 0.5 : 0.5 mixture, in contrast to the pure compounds, the transition temperature sharply changed at around 50% of the fraction of the closed-ring isomer. TEM imaging showed that the 0.5 : 0.5 mixture with high photoisomerization yield formed a 10 nm-sized network. Judging from the phase diagram and TEM images, the separation is understood as the local phase transition of the regions with a high fraction of the closed-ring isomer.

Switchable Solubility of Azobenzene-Based Bolaamphiphiles

The ability to design amphiphiles with predictable solubility properties is of everlasting interest in supramolecular chemistry. Relevant structural parameters include the hydrophobic-hydrophilic balance and structural flexibility. In this work, we investigate the water solubility of azobenzene-based triglycerol bolaamphiphiles (TGBAs). In particular, we analyzed the structural effects of backbone hydrophobicity, flexibility, and cis/trans isomerization on the water solubility of a subset of five TGBAs. This leads to the first example of a non-ionic bolaamphiphile whose water solubility can be changed by irradiation with light. The underlying kinetics were monitored using liquid chromatography and a closer analysis of the underlying aggregation processes provides a mechanistic understanding of the light-driven dissolution process. We anticipate that the results obtained will help to engineer bolaamphiphiles with predictable solution properties in the future.

Tuning the Thermoresponsivity of Amphiphilic Copolymers via Stereocomplex Crystallization of Hydrophobic Blocks

Thermoresponsive polymers that exhibit a cloud point temperature (T_cp) are an important class of stimuli-responsive polymers that have great potential for biomedical applications. Precise tuning of the T_cp is of fundamental importance for designing thermoresponsive polymers. However, tuning the T_cp generally requires sophisticated control over the chemical and assembled structures of thermoresponsive polymers. Here, we report a simple yet effective method to tune the T_cp of thermoresponsive polymers only by mixing and varying the mixing ratios of amphiphilic copolymer pair that contains l- and d-configured hydrophobic blocks in a dilute solution. Stereocomplex (SC) crystallization of the l- and d-configured blocks led to form core-shell micelles with a larger size, a bigger core, and a higher aggregation number, which facilitated the intermicellar aggregation upon heating due to improved intermicellar attractions. SC crystallization of the hydrophobic blocks improved the separation efficacy of the thermoresponsive copolymers for removal of hydrophobic pollutants from water.

Insights into the Kinetics of Supramolecular Comonomer Incorporation in Water

Multicomponent supramolecular polymers are a versatile platform to prepare functional architectures, but a few studies have been devoted to investigate their noncovalent synthesis. Here, we study supramolecular copolymerizations by examining the mechanism and time scales associated with the incorporation of new monomers in benzene-1,3,5-tricarboxamide (BTA)-based supramolecular polymers. The BTA molecules in this study all contain three tetra(ethylene glycol) chains at the periphery for water solubility but differ in their alkyl chains that feature either 10, 12 or 13 methylene units. C₁₀BTA does not form ordered supramolecular assemblies, whereas C₁₂BTA and C₁₃BTA both form high aspect ratio supramolecular polymers. First, we illustrate that C₁₀BTA can mix into the supramolecular polymers based on either C₁₂BTA or C₁₃BTA by comparing the temperature response of the equilibrated mixtures to the temperature response of the individual components in water. Subsequently, we mix C₁₀BTA with the polymers and follow the copolymerization over time with UV spectroscopy and hydrogen/deuterium exchange mass spectrometry experiments. Interestingly, the time scales obtained in both experiments reveal significant differences in the rates of copolymerization. Coarse-grained simulations are used to study the incorporation pathway and kinetics of the C₁₀BTA monomers into the different polymers. The results demonstrate that the kinetic stability of the host supramolecular polymer controls the rate at which new monomers can enter the existing supramolecular polymers.

Oligomers as Triggers for Responsive Liquid Crystals

We report an investigation of the influence of aqueous solutions of amphiphilic oligomers on the ordering of micrometer-thick films of thermotropic liquid crystals (LCs), thus addressing the gap in knowledge arising from previous studies of the interactions of monomeric and polymeric amphiphiles with LCs. Specifically, we synthesized amphiphilic oligomers (with decyl hydrophobic and pentaethylene glycol hydrophilic domains) in monomer, dimer, and trimer forms, and incubated aqueous solutions of the oligomers against nematic films of 4'-pentyl-4-biphenylcarbonitrile (5CB). All amphiphilic oligomers caused sequential surface-driven orientational (planar to homeotropic) and then bulk phase transitions (nematic to isotropic) with dynamics depending strongly on the degree of oligomerization. The dynamics of the orientational transitions accelerated from monomer to trimer, consistent with the effects of an increase in adsorption free energy. The mechanism underlying the orientational transition, however, involved a decrease in anchoring energy and not change in the easy axis of the LC. In contrast, the rate of the phase transition induced by absorption of oligomers into the LC decreased from monomer to trimer, suggesting that constraints on configurational degrees of freedom influence the absorption free energies of the oligomers. Interestingly, the oligomer-induced transition from the nematic to isotropic phase of 5CB was observed to nucleate at the aqueous-5CB interface, consistent with surface-induced disorder underlying the above-reported decrease in anchoring energy caused by the oligomers. Finally, we provided proof-of-concept experiments of the triggering of LCs using a trimeric amphiphile that is photocleaved by UV illumination into monomeric fragments. Overall, our results provide insight into the rational design of oligomers that can be used as triggers to create responsive LCs.

Amphiphilic Carbazole-Containing Compounds with Lower Critical Solution Temperature Behavior for Supramolecular Self-Assembly and Solution-Processable Resistive Memories

The self-organization and resistive memory performances of a series of newly synthesized water-soluble amphiphilic carbazole derivatives have been explored. Temperature-dependent UV/Vis absorption spectroscopy has been conducted to study the isodesmic self-assembly mechanism of the carbazole-containing compounds. This class of compounds also exhibits interesting lower critical solution temperature properties, which are sensitive to concentration and ionic additives. One of the compounds has been solution-processed and utilized as an active material in the engineering of resistive memory devices, exhibiting a switching voltage of about 3.9 V, a constant ON/OFF current ratio of 10⁶ , and a long retention time of 10⁴  s. The present work demonstrates the versatile potential applications of water-soluble amphiphilic carbazole-containing compounds in supramolecular chemistry and resistive memory devices.

Stimuli-Responsive Directional Vesicular Assembly with Tunable Surface Functionality and Impact on Enzyme Inhibition

The article describes the self-assembly of a series of unsymmetrical bola-shaped π-amphiphiles (NDI-1, NDI-1a, NDI-2, NDI-3, and NDI-4) consisting of a hydrophobic naphthalene-diimide (NDI) chromophore attached to a nonionic hydrophilic wedge and an anionic headgroup in the two opposite arms of the central NDI. By design, only a single hydrazide group is linked either on the ionic or nonionic arm of the NDI. NDI-1 and NDI-1a are regioisomers differing only in the location of the hydrazide group, placed in the nonionic or ionic arm, respectively. NDI-2, NDI-3, and NDI-4 are similar to NDI-1 in the placement of the hydrazide group but differ in the nature of the ionic headgroups. Except for NDI-2, all of them exhibit spontaneous vesicle structures in water (pH 9.0) as established by electron microscopy, small-angle neutron scattering, dynamic light scattering, and spectroscopy studies. Supramolecularly assembled oligo-oxyethylene chains of the hydrophobic wedge exhibited a lower critical solution temperature (LCST) at ∼40 °C, similar to that of covalent polymers. Consequently, above the LCST, the bola-amphiphile was converted to a single headgroup surfactant, resulting in the collapse of the vesicular structure to nanoparticles. In all examples, the dominant H-bonding force among the hydrazide groups resulted in unidirectional orientation, leading to the formation of a nonsymmetric membrane with the H-bonded chain located at the inner wall. Therefore, the functional group displayed in these vesicles could be fully dictated by the location of the hydrazide group. Thus, for NDI-1, NDI-3, or NDI-4, the hydrazide group, located at the nonionic arm, directed the nonionic wedge to converge at the inner wall of the vesicle by displaying the anionic headgroups toward the outer surface. In contrast, NDI-1a formed a nonionic vesicle because in this case anionic headgroups were located at the inner wall of the membrane. Furthermore, among NDI-1, NDI-3, and NDI-4, the charge density of the anionic surface and accordingly the radius of curvature and particle size could be tuned precisely as a function of the extent of charge delocalization in the phenoxide or carboxylate headgroup. These distinct self-assembly modes resulted in very different abilities of these vesicles for electrostatic-interaction-driven biomolecular recognition, which was studied by testing their ability to bind with cationic protein chymotripsin and inhibit its enzymatic activity. The enzyme inhibition ability followed the order NDI-1 > NDI-3 > NDI-4 > NDI-2 ≈ NDI-1a, which could be rationalized by their distinct functional group display and surface charge density factors.

Phototransformative Supramolecular Assembly of Amphiphilic Diarylethenes Realized by a Combination of Photochromism and Lower Critical Solution Temperature Behavior

Amphiphilic diarylethenes bearing octyloxycarbonyl and N-octylcarbamoyl groups have been designed and synthesized. These ester- and amide-linked compounds form micrometer-sized supramolecular assemblies in water, and these assemblies exhibit photoinduced macroscopic morphological transformations upon alternate irradiation with UV and visible light. The ester-linked diarylethene showed a transformation between colorless spheres and a red-purple hazy fringe, whereas the microspheres of the amide-linked diarylethene showed changes in color, size, and shape, but the spheres did not show division. TEM images revealed that the spheres of the open-ring isomers have coacervate structures, with bicontinuous aqueous and organic phases. The closed-ring isomers of the ester- and amide-linked compounds were found to form nanofibers and thin layers, respectively. These compounds showed absorption spectral shifts at temperatures corresponding to the lower critical solution temperature (LCST) transition. This morphological transformation can be rationalized as the photoinduced phase transition between the high- and low-temperature phases of the LCST transition. These results open up a new avenue for the design of phototransformative supramolecular assemblies based on a combination of photochromism and LCST behavior.

Smart Fluorescent Nanoparticles in Water Showing Temperature-Dependent Ratiometric Fluorescence Color Change

We synthesized two different amphiphilic small molecules 1 and 2 by attaching the same oligo(ethylene glycol) (OEG) unit to the same dicyanodistyrylbenzene (DCS) fluorophore but at different positions. These molecules self-assemble into nanoparticles in water and show lower critical solution temperature (LCST) at 26 and 58 °C, respectively. Upon heating, the transition of hydrophilic coils to hydrophobic globules of the OEG unit leads to the change in the stacking structure of the luminescent DCS cores. As a result, it shows significant ratiometric fluorescence color changes from excimeric yellow emission to monomer-dominated green emission. Interestingly, the coassembly of 1 and 2 exhibits single transition temperature between the transition temperatures of the two components. Moreover, it is demonstrated that the transition temperature of the coassembly is delicately tuned over 26-58 °C by varying the molar mixing ratio of them.

Release Behavior of Polymeric Vesicles in Solution Controlled by External Electrostatic Field

We found that the polymeric vesicles from the self-assembly of amphiphilic block copolymer polystyrene-block-poly(acrylic acid) (PS₁₄₄-b-PAA₂₂) in the dioxane/water mixture can be deformed, broken and finally divided into smaller ones via the external electrostatic field. The higher the electrostatic field intensity, the smaller the vesicles. More importantly, this fission phenomenon induced by electrostatic field can be used to control the release behavior of the vesicles. Our experimental results show that the Nile Red (NR) molecules encapsulated inside the cavity of vesicles can be accurately released by controlling the electrostatic field intensity and the release time. These findings not only enrich the knowledge for the external field induced transformation of polymer structures, but also provide a new and highly convenient approach for the controllable release of polymersomes in solution.

Perylene bisimide hydrogels and lyotropic liquid crystals with temperature-responsive color change

The self-assembly of perylene bisimide (PBI) dyes bearing oligo ethylene glycol (OEG) units in water affords responsive functional nanostructures characterized by their lower critical solution temperature (LCST). Tuning of the LCST is realized by a supramolecular approach that relies on two structurally closely related PBI-OEG molecules. The two PBIs socially co-assemble in water and the resulting nanostructures exhibit a single LCST in between the transition temperatures of the aggregates formed by single components. This permits to precisely tune the transition from a hydrogel to a lyotropic liquid crystal state at temperatures between 26 and 51 °C by adjusting the molar fraction of the two PBIs. Owing to concomitant changes in PBI-PBI interactions this phase transition affords a pronounced color change with "fluorescence-on" response that can be utilized as a smart temperature sensory system.

Role of Aromatic Interactions in Temperature-Sensitive Amphiphilic Supramolecular Assemblies

Aromatic interactions were found to greatly influence the temperature-dependent dynamic behavior within supramolecular assemblies. Using an amphiphilic dendron, we systematically changed the hydrophobic groups introducing increasing levels of aromaticity while keeping the hydrophilic part constant. We show that the supramolecular assemblies become less sensitive to temperature changes when aromatic interactions in the aggregate are increased. Conversely, the absence of aromaticity in the hydrophobic moieties produces temperature-sensitive aggregates. These results show that subtle molecular-level interactions can be utilized to control temperature-sensitive behavior in the nanoscale. These findings open up new design strategies to rationally tune the behavior of stimuli-responsive supramolecular assemblies on multiple spatiotemporal scales.