Shape-Controlled Synthesis of Colloidal Metal Nanocrystals: Thermodynamic versus Kinetic Products

Enhanced immunochromatographic assay using multifunctional gold@iridium nanoflower with colorimetric photothermal catalytic activity for the detection of staphylococcal enterotoxin B

The development of a rapid, sensitive, and accurate screening method for staphylococcal enterotoxin B (SEB) in food is urgently needed because trace amounts of SEB can pose a serious threat to human health. Here, we developed a ultrasensitive triple-modal immunochromatographic assay (ICA) for SEB detection. The AuNFs@Ir nanoflowers exhibited enhanced colorimetric, photothermal, and catalytic performance by modulating the sharp branching structure of the gold nanoflowers and depositing high-density Ir atoms. Subsequently, the combination of AuNFs@Ir and ICA promoted colorimetric, catalytic amplified colorimetric, and photothermal-assisted quantitative detection. The results showed detection limits of 0.175, 0.0188, and 0.043 ng mL-1 in the colorimetric/photothermal/catalytic mode, which increased the sensitivity by 16.5-fold, 153.7-fold, and 67.2-fold, respectively, compared with the AuNPs-ICA. Furthermore, the proposed strategy was verified in milk, milk powder, pork, and beef successfully. This strategy improves significantly the sensitivity, accuracy, flexibility and offers an effective insight for foodborne bacterial toxin monitoring.

Evaluating the Accuracy of the COMSOL-Based Finite-Element Method for Simulating Plasmon-Modified Fluorescence

Accurately modeling plasmon-modified fluorescence is important for understanding and guiding the design of experimental nanostructures that reliably enhance fluorescence. They are of particular interest due to their potential to allow localized "hot spots" of high fluorescence enhancement in a reproducible manner. Given the increasingly prevalent use of the COMSOL Multiphysics software package for simulating these phenomena, we investigate its accuracy using an analytically tractable model consisting of a gold nanosphere interacting with either a plane wave or a radiating point dipole. COMSOL simulation results were compared with a formally exact analytical theory. It was found that simulation parameters commonly used for plane-wave scattering do not necessarily produce accurate results for the nanoparticle-plasmon-coupled dipole emission case. Instead, user-input adaptive meshing parameters were found to be helpful in achieving quantitative agreements between COMSOL and analytical theory results for plasmon-modified fluorescence. Our studies suggest convergence to analytically calculated values when a minimum of two additional user-input mesh elements separate the point-dipole position and the nanoparticle surface. This practical insight is expected to aid in the application of COMSOL simulations to planning and interpreting fluorescence modification experiments.

Fast tailoring the ZIF-8 surface microenvironment at ambient temperature to boost glucose oxidase-like activity of AuNPs for biosensing

Rational design and tailoring of the surface microenvironment surrounding the catalytic sites, such as noble metal nanoparticles, is an effective way to enhance the catalytic activity of mimicking enzymes. However, it remains on-going challenges to regulate the microenvironment of the catalytic sites due to the lack of tunable variability in structural precision of conventional solid catalysts. Herein, three types of zeolitic imidazolate framework-8 (ZIF-8) with different major crystal facet orientations, i.e., cubic with (100) facets (denoted ZIF-8c), truncated dodecahedral with (100), (110) facets (denoted ZIF-8tr), and dodecahedral with (110) facets (denoted ZIF-8r), were developed facilely using an electrochemical method by switching the potential at ambient temperature. Because the Zn2+ nodes were predominantly exposed on the (100) facets of ZIF-8, while the ligands were mainly exposed on the (110) facets. Hence, gold nanoparticles (AuNPs) showed differential glucose oxidase (GOx)-like activities when anchored in situ on different crystal facets of ZIF-8 and obeyed the following order ZIF-8c/Au>ZIF-8tr/Au>ZIF-8r/Au. Notably, both the metal nodes and aromatic linkers of ZIF-8 interacted with AuNPs through coordination and π-π interactions. The Zn2+ nodes facilitated the formation of the electron-deficient Au species. The electron transfer from AuNPs to Zn2+ sites effectively boosted the catalytic activity. It was known that directly tailoring the microenvironment at the supporting sites of noble metal catalysts to boost catalysis through a facile electrochemical method was not reported. Based on the favorable GOx-like activity and long-term stability of ZIF-8tr/Au, a highly sensitive electrochemical biosensing platform for assaying squamous cell carcinoma antigen (SCCA) was developed. It enabled fg-level detection of cancer marker.

Seed-Mediated Growth and Advanced Characterization of Chiral Gold Nanorods

The controlled growth of gold nanostructures with complex shapes and reduced symmetry, exemplified by chiral gold nanorods and nanoparticles, is one of the most dynamic fields of nanochemistry. A timely summary of underlying concepts, including growth mechanisms and redefined chirality measures, would further promote this research area. In this perspective, we aim to establish qualitative connections between the chiral shapes and growth conditions, specifically for the seed-mediated synthesis of chiral gold nanorods as a convenient case of chiral morphogenesis. The crystallographic and morphological features of achiral nanorods used as seeds, the experimental conditions during chiral growth, and the symmetry of the chiral inducers, can all be exploited to obtain nanorods with intricate chiral shapes. Chirality characterization (such as electron tomography techniques) and quantification (including chirality measures) emerge as critical aspects to comprehensively explore and understand such structures, enabling optimization of their geometric and optical features. We conclude by discussing relevant challenges to be addressed toward a better controlled synthesis of chiral plasmonic nanostructures.

Why Colloidal Syntheses of Bimetallic Nanoparticles Cannot be Generalized

Introducing one general synthesis to form bimetallic nanoparticles (NPs) could accelerate the discovery of NPs for promising energy applications. Although colloidal syntheses can provide precise structural and morphological control of bimetallic NPs, the complex chemical nature of multicomponent syntheses challenges the realization of such synthetic simplicity. Common synthetic issues are frequently ascribed to the variation in metal ion precursor reactivities and complex chemical interactions between the different metal surfaces and capping agents employed. However, no systematic studies have shown how these factors compete to ultimately assign the factor limiting the mixing and formation of bimetallic NPs. Here, we provide a parametric investigation of how the intrinsic standard reduction potentials (E0red) of the metal ions and cocapping agents influence the formation of bimetallic AuCu, AuPd, and PdCu NPs. Using a combination of in situ X-ray total scattering along with transmission electron microscopy and nuclear magnetic resonance spectroscopy, we illustrate the multifunctional role of the cocapping agents through interactions with both the metal ion precursors and NP surfaces to stabilize metastable structures. Additionally, we demonstrate how system-specific side reactions and the local metal ion coordination environment can be used to selectively tune the formation kinetics, structure, and morphology of bimetallic NPs. Ultimately, these insights show that the chemical interactions rather than the intrinsic E0red are responsible for the formation of bimetallic NPs. Broadly, these insights should aid the synthetic design of tailored multimetallic NPs.

Impact of Nanomedicine in Women's Metastatic Breast Cancer

Metastatic breast cancer is responsible for 90% of mortalities among women suffering from various types of breast cancers. Traditional cancer treatments such as chemotherapy and radiation therapy can cause significant side effects and may not be effective in many cases. However, recent advances in nanomedicine have shown great promise in the treatment of metastatic breast cancer. For example, nanomedicine demonstrated robust capacity in detection of metastatic cancers at early stages (i.e., before the metastatic cells leave the initial tumor site), which gives clinicians a timely option to change their treatment process (for example, instead of endocrine therapy they may use chemotherapy). Here recent advances in nanomedicine technology in the identification and treatment of metastatic breast cancers are reviewed.

Facile Synthesis and Characterization of Uniform Au Nanospheres Capped by Citrate for Biomedical Applications

We report a simple and versatile method for effectively replacing the toxic ligands, such as cetyltrimethylammonium bromide (CTAB) and cetyltrimethylammonium chloride (CTAC), on the surface of Au nanospheres with different sizes by citrate. The method involves the deposition of an ultrathin shell of fresh Au in the presence of sodium citrate at an adequate concentration. After the ligand exchange process, multiple techniques are used to confirm that the surface of the resultant Au nanospheres is covered by citrate while there is no sign of aggregation. We also demonstrate the mitigation of cell toxicity after exchanging the surface-bound CTAB/CTAC with citrate, opening the door to a range of biomedical applications.

Variations in CTAC batches from different suppliers highly affect the shape yield in seed-mediated synthesis of gold nanotriangles

The rapidly developing miniaturization in numerous fields require low-demanding but robust methods of nanomaterial production. Colloidal synthesis provides great flexibility in product material, size, and shape. Gold nanoparticle synthesis has been thoroughly studied, however, recent reports on mechanistic insights of crystal formation have been hindered by the numerous procedures and parameter optimization works. With every new study, scientists fill another blank space on the map of understanding anisotropic growth and find out the critical parameters. In the current work, we highlight the choice importance for surfactant supplier in achieving the gold nanotriangle formation. We systematically study the variation in the shape yield when utilizing five batches of cetyltrimethylammonium chloride (CTAC) from varied suppliers. Using analytical techniques, we search for deviations causing such variation, e.g. different impurity content. We found only a marginal effect of iodine contamination on the studied system, excluding this factor as decisive in contrast to what was proposed earlier in the literature, and leaving the high dependency of the yield to originate from yet unknown reagent characteristics. A deeper understanding of these factors would provide highly effective protocols lowering the reagent consumption and increasing the accessibility of nanomaterials manufactured in a sustainable manner.

A catalyst family of high-entropy alloy atomic layers with square atomic arrangements comprising iron- and platinum-group metals

We report a catalyst family of high-entropy alloy (HEA) atomic layers having three elements from iron-group metals (IGMs) and two elements from platinum-group metals (PGMs). Ten distinct quinary compositions of IGM-PGM-HEA with precisely controlled square atomic arrangements are used to explore their impact on hydrogen evolution reaction (HER) and hydrogen oxidation reaction (HOR). The PtRuFeCoNi atomic layers perform enhanced catalytic activity and durability toward HER and HOR when benchmarked against the other IGM-PGM-HEA and commercial Pt/C catalysts. Operando synchrotron x-ray absorption spectroscopy and density functional theory simulations confirm the cocktail effect arising from the multielement composition. This effect optimizes hydrogen-adsorption free energy and contributes to the remarkable catalytic activity observed in PtRuFeCoNi. In situ electron microscopy captures the phase transformation of metastable PtRuFeCoNi during the annealing process. They transform from random atomic mixing (25°C), to ordered L10 (300°C) and L12 (400°C) intermetallic, and finally phase-separated states (500°C).

Plasmon-Induced Hot Electrons in Nanostructured Materials: Generation, Collection, and Application to Photochemistry

Plasmon refers to the coherent oscillation of all conduction-band electrons in a nanostructure made of a metal or a heavily doped semiconductor. Upon excitation, the plasmon can decay through different channels, including nonradiative Landau damping for the generation of plasmon-induced energetic carriers, the so-called hot electrons and holes. The energetic carriers can be collected by transferring to a functional material situated next to the plasmonic component in a hybrid configuration to facilitate a range of photochemical processes for energy or chemical conversion. This article centers on the recent advancement in generating and utilizing plasmon-induced hot electrons in a rich variety of hybrid nanostructures. After a brief introduction to the fundamentals of hot-electron generation and decay in plasmonic nanocrystals, we extensively discuss how to collect the hot electrons with various types of functional materials. With a focus on plasmonic nanocrystals made of metals, we also briefly examine those based upon heavily doped semiconductors. Finally, we illustrate how site-selected growth can be leveraged for the rational fabrication of different types of hybrid nanostructures, with an emphasis on the parameters that can be experimentally controlled to tailor the properties for various applications.

Exploring the Complex Chemistry and Degradation of Ascorbic Acid in Aqueous Nanoparticle Synthesis

Ascorbic acid (AA) is the most widely used reductant for noble metal nanoparticle (NP) synthesis. Despite the synthetic relevance, its aqueous chemistry remains misunderstood, due in part to various assumptions about its reduction pathway which are insufficiently supported by experimental evidence. This study aims to provide an understanding of the complex chemistry associated with AA under aqueous conditions. We demonstrate that (i) AA undergoes appreciable degradation in alkaline solution on a timescale relevant to NP synthesis, (ii) contrary to popular belief, AA does not degrade into dehydroascorbic acid (DHA), nor is DHA the oxidized product of AA under noble metal NP synthetic conditions, (iii) DHA, which readily degrades under alkaline conditions, can also effectively reduce metal salt precursors to metal NPs, (iv) neither ascorbate nor dehydroascorbate act as surface capping agents post-synthetically on the NPs (v) AA degradation time greatly affects the morphology and polydispersity of the resultant NP. Results from our mechanistic investigation enabled us to utilize purposefully-aged reductants to achieve control over shape yield and monodispersity in the seed-mediated synthesis of Au nanorods. Our findings have important implications for achieving monodispersed products in the many metal NP synthesis reactions that make use of AA as a reducing agent.

Robust, Reproducible, and Scalable Synthesis of Silver Nanocubes

It remains a challenge to accomplish colloidal synthesis of noble-metal nanocrystals marked by high quality, large quantity, and batch-to-batch consistency. Here we report a self-airtight setup for achieving robust, reproducible, and scalable production of Ag nanocubes with uniform and controlled sizes from 18 to 60 nm. Different from the conventional open-to-air setup, the self-airtight system makes it practical to stabilize the reaction condition by minimizing the loss of volatile reagents. The new setup also allows us to easily optimize the amount of O2 (from air) trapped in the system, ensuring burst nucleation of single-crystal seeds, followed by their slow growth into nanocubes. Most significantly, the new setup allows for the production of Ag nanocubes at gram quantities without sacrificing uniformity, corner/edge sharpness, controlled size, and high purity across different batches. The availability of high-quality Ag nanocubes in such a large quantity is anticipated to substantially boost their use in applications related to plasmonics, catalysis, and biomedicine.

Insight from Boric Acid into Bioskeleton Formation: Inscribed Circle Effect on the Edge-Base Plate Growth

Complex morphologies in nature often arise from the assembly of elemental building blocks, leading to diverse and intricate structures. Understanding the mechanisms that govern the formation of these complex morphologies remains a significant challenge. In particular, the edge-base plate growth of biogenic crystals plays a crucial role in directing the development of intricate bioskeleton morphologies. However, the factors and regulatory processes that govern edge-base plate growth remain insufficiently understood. Inspired by biological skeletons and based on the soluble property of boric acid (BA) in both water and alcohols, we obtained a series of novel BA morphologies, including coccolith, and anemone biological skeletons. Here, we unveil the "inscribed circle effect", a concise mathematical model that reveals the underlying causative factors and regulatory mechanisms driving edge-base plate growth. Our findings illuminate how variations in solvent environments can exert control over the edge-base plate growth pathways, thereby resulting in the formation of diverse and complex morphologies. This understanding holds significant potential for guiding the chemical synthesis of bioskeleton materials.

Optimizing Silver Paste Conductivity with Controlled Convection for Nanowrinkle Growth

Conductive silver paste plays a crucial role as an interconnecting material between electrodes and circuits in electronic circuits and solar cells. The quality of the silver paste is greatly influenced by the preparation of the conductive-phase silver powder and the sintering process. This study investigated the impact of fluid dynamics on the preparation of silver powder. Combined with X-ray diffractometer characterization and molecular dynamics simulation, the formation mechanism of wrinkled silver powder was explained. The wrinkled silver powder replaced the traditional smooth spherical silver powder, and the point contact between the smooth silver powder turned into a line and surface contact. After mixing and sintering with the micrometer flake silver powder, the electrical conductivity and sintering morphology of the silver paste were improved. Compared with the silver content of conventional silver paste (≥75 wt %), the silver paste of (9.23 ± 0.68) × 10-6 Ω cm can be prepared by curing at 250 °C for 45 min when wrinkled powder/flake powder = 1:1 and silver paste content was only 66.7%. This research work provides a new idea for the morphology control of submicrometer silver powder, which has important applications in the field of low-temperature silver paste for new N-type batteries.

Solvothermal Preparation of Crystal Seeds and Anisotropy-Controlled Growth of Silver Nanoplates

We synthesized silver nanoplates using the solvothermal method and, for the first time, placed them as crystal seeds in a water-based growth solution, thereby successfully achieving the large-scale production of silver nanoplates. The synthesis method enabled independent control of the lateral size and vertical size of the silver nanoplates. More specifically, the lateral size could be adjusted within the range of 565 nm-1.682 μm, while the vertical size was achieved by introducing Cl- as a capping agent and the vertical size was thickened from 18.28 to 40.41 nm.

Combating Atherosclerosis with Chirality/Phase Dual-Engineered Nanozyme Featuring Microenvironment-Programmed Senolytic and Senomorphic Actions

Senescence plays a critical role in the development and progression of various diseases. This study introduces an amorphous, high-entropy alloy (HEA)-based nanozyme designed to combat senescence. By adjusting the nanozyme's composition and surface properties, this work analyzes its catalytic performance under both normal and aging conditions, confirming that peroxide and superoxide dismutase (SOD) activity are crucial for its anti-aging therapeutic function. Subsequently, the chiral-dependent therapeutic effect is validated and the senolytic performance of D-handed PtPd2CuFe across several aging models is confirmed. Through multi-Omics analyses, this work explores the mechanism underlying the senolytic action exerted by nanozyme in depth. It is confirm that exposure to senescent conditions leads to the enrichment of copper and iron atoms in their lower oxidation states, disrupting the iron-thiol cluster in mitochondria and lipoic acid transferase, as well as oxidizing unsaturated fatty acids, triggering a cascade of cuproptosis and ferroptosis. Additionally, the concentration-dependent anti-aging effects of nanozyme is validated. Even an ultralow dose, the therapeutic can still act as a senomorphic, reducing the effects of senescence. Given its broad-spectrum action and concentration-adjustable anti-aging potential, this work confirms the remarkable therapeutic capability of D-handed PtPd2CuFe in managing atherosclerosis, a disease involving various types of senescent cells.

Recent advances in dynamic reconstruction of electrocatalysts for carbon dioxide reduction

Electrocatalysts undergo structural evolution under operating electrochemical CO2 reduction reaction (CO2RR) conditions. This dynamic reconstruction correlates with variations in CO2RR activity, selectivity, and stability, posing challenges in catalyst design for electrochemical CO2RR. Despite increased research on the reconstruction behavior of CO2RR electrocatalysts, a comprehensive understanding of their dynamic structural evolution under reaction conditions is lacking. This review summarizes recent developments in the dynamic reconstruction of catalysts during the CO2RR process, covering fundamental principles, modulation strategies, and in situ/operando characterizations. It aims to enhance understanding of electrocatalyst dynamic reconstruction, offering guidelines for the rational design of CO2RR electrocatalysts.

Controllable synthesis of high-entropy alloys

High-entropy alloys (HEAs) involving more than four elements, as emerging alloys, have brought about a paradigm shift in material design. The unprecedented compositional diversities and structural complexities of HEAs endow multidimensional exploration space and great potential for practical benefits, as well as a formidable challenge for synthesis. To further optimize performance and promote advanced applications, it is essential to synthesize HEAs with desired characteristics to satisfy the requirements in the application scenarios. The properties of HEAs are highly related to their chemical compositions, microstructure, and morphology. In this review, a comprehensive overview of the controllable synthesis of HEAs is provided, ranging from composition design to morphology control, structure construction, and surface/interface engineering. The fundamental parameters and advanced characterization related to HEAs are introduced. We also propose several critical directions for future development. This review can provide insight and an in-depth understanding of HEAs, accelerating the synthesis of the desired HEAs.

Troubleshooting the influence of trace chemical impurities on nanoparticle growth kinetics via electrochemical measurements

Reproducibility issues resulting from particle growth solutions made with cetyltrimethylammonium bromide (CTAB) surfactant from different lots and product lines in a newly developed synthesis of monometallic palladium (Pd) tetrahexahedra (THH) nanoparticles are investigated via a multi-pronged approach. Time-resolved electrochemical measurements of solution potential, variation of chemical parameters in colloidal synthesis, and correlation to electrodeposition syntheses are used together to uncover the effects of the unknown contaminants on the chemical reducing environment during nanoparticle growth. Iodide-a known impurity in commercial CTAB-is identified as one of the required components for equalizing the reducing environment across multiple CTAB sources. However, an additional component-acetone-is critical to establishing the growth kinetics necessary to enable the reproducible synthesis of THH in each of the CTAB formulations. In one CTAB variety, the powdered surfactant contains too much acetone, and drying of the as-received surfactant and re-addition of solvent is necessary for successful Pd THH synthesis. The relevance of solvent impurities to the reducing environment in aqueous nanoparticle synthesis is confirmed via electrochemical measurement approaches and solvent addition experiments. This work highlights the utility of real-time electrochemical potential measurements as a tool for benchmarking of nanoparticle syntheses and troubleshooting of reproducibility issues. The results additionally emphasize the importance of considering organic solvent impurities in powdered commercial reagents as a possible shape-determining factor during shaped nanomaterials synthesis.

Open Cross-gap Gold Nanocubes with Strong, Large-Area, Symmetric Electromagnetic Field Enhancement for On-Particle Molecular-Fingerprint Raman Bioassays

Plasmonic nanoparticles with an externally open nanogap can localize the electromagnetic (EM) field inside the gap and directly detect the target via the open nanogap with surface-enhanced Raman scattering (SERS). It would be beneficial to design and synthesize the open gap nanoprobes in a high yield for obtaining uniform and quantitative signals from randomly oriented nanoparticles and utilizing these particles for direct SERS analysis. Here, we report a facile strategy to synthesize open cross-gap (X-gap) nanocubes (OXNCs) with size- and EM field-tunable gaps in a high yield. The site-specific growth of Au budding structures at the corners of the AuNC using the principle that the Au deposition rate is faster than the surface diffusion rate of the adatoms allows for a uniform X-gap formation. The average SERS enhancement factor (EF) for the OXNCs with 2.6 nm X-gaps was 1.2 × 109, and the EFs were narrowly distributed within 1 order of magnitude for ∼93% of the measured OXNCs. OXNCs consistently displayed strong EM field enhancement on large particle surfaces for widely varying incident light polarization directions, and this can be attributed to the symmetric X-gap geometry and the availability of these gaps on all 6 faces of a cube. Finally, the OXNC probes with varying X-gap sizes have been utilized in directly detecting biomolecules with varying sizes without Raman dyes. The concept, synthetic method, and biosensing results shown here with OXNCs pave the way for designing, synthesizing, and utilizing plasmonic nanoparticles for selective, quantitative molecular-fingerprint Raman sensing and imaging applications.

Rational Electrochemical Design of Cuprous Oxide Hierarchical Microarchitectures and Their Derivatives for SERS Sensing Applications

Rational morphology control of inorganic microarchitectures is important in diverse fields, requiring precise regulation of nucleation and growth processes. While wet chemical methods have achieved success regarding the shape-controlled synthesis of micro/nanostructures, accurately controlling the growth behavior in real time remains challenging. Comparatively, the electrodeposition technique can immediately control the growth behavior by tuning the overpotential, whereas it is rarely used to design complex microarchitectures. Here, the electrochemical design of complex Cu2O microarchitectures step-by-step by precisely controlling the growth behavior is demonstrated. The growth modes can be switched between the thermodynamic and kinetic modes by varying the overpotential. Cl- ions preferably adhered to {100} facets to modulate growth rates of these facets is proved. The discovered growth modes to prepare Cu2O microarchitectures composed of multiple building units inaccessible with existing methods are employed. Polyvinyl alcohol (PVA) additives can guarantee all pre-electrodeposits simultaneously evolve into uniform microarchitectures, instead of forming undesired microstructures on bare electrode surfaces in following electrodeposition processes is discovered. The designed Cu2O microarchitectures can be converted into noble metal microstructures with shapes unchanged, which can be used as surface-enhanced Raman scattering substrates. An electrochemical avenue toward rational design of complex inorganic microarchitectures is opened up.

Bridging colloidal and electrochemical syntheses of metal nanocrystals with seeded electrodeposition for tracking single nanocrystal growth

Metal nanocrystals (NCs) produced by colloidal synthesis have a variety of structural features, such as different planes, edges, and defects. Even from the best colloidal syntheses, these characteristics are distributed differently in each NC. This inherent heterogeneity can play a significant role in the properties displayed by NCs. This manuscript reports the use of electrochemistry to synthesize Au NCs in a system evaluated to track individual NC growth trajectories as a first step toward rapid identification of NCs with different structural features. Au nanocubes were prepared colloidally and deposited onto a glassy carbon electrode using either electrospray or an airbrush, resulting in well-spaced Au nanocubes. The Au nanocubes then served as seeds as gold salt was reduced to deposit metal at constant potential. Deposition at constant potential facilitates overgrowth on the Au nanocubes to achieve new NC shapes. The effects of applied potential, deposition time, precursor concentration, and capping agents on NC shape evolution were studied. The outcomes are correlated to results from traditional colloidal syntheses, providing a bridge between the two synthetic strategies. Moreover, scanning electron microscopy was used to image the same NCs before and after deposition, linking individual seed features to differences in deposition. This ability is anticipated to enable tracking of individual growth trajectories of NCs to elucidate sources of heterogeneity in NC syntheses.

Photochemical engineering unsaturated Pt islands on supported Pd nanocrystals for a robust pH-universal hydrogen evolution reaction

The rational design of heterostructured nanocrystals (HNCs) is of great significance for developing highly efficient hydrogen evolution reaction (HER) electrocatalysts. However, a significant challenge still lies in realizing the controllable synthesis of desired HNCs directly onto a support and exploring their structure-activity-dependent HER performance. Herein, we reported various controllable Pd7@Ptx core-shell HNCs with optimal hybrid structures via a photochemical deposition strategy. The growth patterns of a Pt shell can be finely controlled by adjusting the growth kinetics, resulting in a varying deposition rate. In particular, the as-prepared Pd7@Pt3 HNCs with a Pt shell in the Stranski-Krastanov mode showed the best performances over a wide pH range media, delivering low overpotentials of 33, 18 and 49 mV, resulting in a catalytic current density of 10 mA cm-2 at a low effective catalyst loading of 0.021 mg cm-2. The resulting Tafel slopes were 23.1, 52.6 and 42.7 mV dec-1 in 0.5 M H2SO4, 1.0 M phosphate-buffered saline (PBS) and 1.0 M KOH electrolyte, respectively. It was found that the increased fraction of unsaturated coordination of Pt islands in the resultant material is the key to the enhanced and robust HER activity, which has been confirmed through density functional theory (DFT) calculations. This strategy could be extended to the rational design and synthesis of other heterostructured catalysts for energy conversion and storage.

Mechanochemical hydroquinone regeneration promotes gold salt reduction in sub-stoichiometric conditions of the reducing agent

Bottom-up mechanochemical synthesis (BUMS) has been demonstrated to be an efficient approach for the preparation of metal nanoparticles (NPs), protected by surface agents or anchored on solid supports. However, there are limitations, such as precise size and morphological control, due to a lack of knowledge about the mechanically induced processes of NP formation under milling. In this article, we further investigate the BUMS of AuNPs. Using SiO2 as a solid support, we studied the effect of typical reducing agents, namely NaBH4, L-ascorbic acid, and hydroquinone (HQ), on the conversion of a AuIII source. XANES showed that HQ is the strongest reducing agent under our experimental conditions, leading to the quantitative conversion of gold salt in a few minutes. Interestingly, even when HQ was used in sub-stoichiometric amounts, AuIII could be reduced to ratios higher than 85% after two minutes of milling. Investigations into the byproducts by 1H NMR and GC-FID/MS enabled the identification HQ regeneration and the formation of its derivatives. We mainly focused on benzoquinone (BQ), which is the product of the oxidation of HQ as it reduces the gold salt. We could demonstrate that HQ is regenerated from BQ exclusively under milling and acidic conditions. The regenerated HQ and other HQ-chlorinated molecules could then reduce gold-oxidized species, leading to higher conversions and economy of reactants. Our study highlights the intriguing and complex mechanisms of mechanochemical systems, in addition to fostering the atom and energy economy side of mechanochemical means to produce metal nanoparticles.

One-Step Electrochemical Synthesis of Multiyolk-Shell Nanocoils for Exceptional Photocatalytic Performance

Multiyolk-shell (mYS) nanostructures have garnered significant interest in various photocatalysis applications such as water splitting and waste treatment. Nonetheless, the complexity and rigorous conditions for the synthesis have hindered their widespread implementation. This study presents a one-step electrochemical strategy for synthesizing multiyolk-shell nanocoils (mYSNC), wherein multiple cores of noble metal nanoparticles, such as Au, are embedded within the hollow coil-shaped FePO4 shell structures, mitigating the challenges posed by conventional methods. By capitalizing on the dissimilar dissolution rates of bimetallic alloy nanocoils in an electrochemically programmed solution, nanocoils of different shapes and materials, including two variations of mYSNCs are successfully fabricated. The resulting Au-FePO4 mYSNCs exhibit exceptional photocatalytic performance for environmental remediation, demonstrating up to 99% degradation of methylene blue molecules within 50 min and 95% degradation of tetracycline within 100 min under ultraviolet-visible (UV-vis) light source. This remarkable performance can be attributed to the abundant electrochemical active sites, internal voids facilitating efficient light harvesting with coil morphology, amplified localized surface plasmon resonance (LSPR) at the plasmonic nanoparticle-semiconductor interface, and effective band engineering. The innovative approach utilizing bimetallic alloys demonstrates precise geometric control and design of intricate multicomponent hybrid composites, showcasing the potential for developing versatile hollow nanomaterials for catalytic applications.

Single [0001]-oriented zinc metal anode enables sustainable zinc batteries

The optimization of crystalline orientation of a Zn metal substrate to expose more Zn(0002) planes has been recognized as an effective strategy in pursuit of highly reversible Zn metal anodes. However, the lattice mismatch between substrate and overgrowth crystals has hampered the epitaxial sustainability of Zn metal. Herein, we discover that the presence of crystal grains deviating from [0001] orientation within a Zn(0002) metal anode leads to the failure of epitaxial mechanism. The electrodeposited [0001]-uniaxial oriented Zn metal anodes with a single (0002) texture fundamentally eliminate the lattice mismatch and achieve ultra-sustainable homoepitaxial growth. Using high-angle angular dark-filed scanning transmission electron microscopy, we elucidate the homoepitaxial growth of the deposited Zn following the "~ABABAB~" arrangement on the Zn(0002) metal from an atomic-level perspective. Such consistently epitaxial behavior of Zn metal retards dendrite formation and enables improved cycling, even in Zn||NH4V4O10 pouch cells, with a high capacity of 220 mAh g-1 for over 450 cycles. The insights gained from this work on the [0001]-oriented Zn metal anode and its persistently homoepitaxial mechanism pave the way for other metal electrodes with high reversibility.

Revisiting El-Sayed Synthesis: Bayesian Optimization for Revealing New Insights during the Growth of Gold Nanorods

In diverse fields, machine learning (ML) has sparked transformative changes, primarily driven by the wealth of big data. However, an alternative approach seeks to mine insights from "precious data", offering the possibility to reveal missed knowledge and escape potential knowledge traps. In this context, Bayesian optimization (BO) protocols have emerged as crucial tools for optimizing the synthesis and discovery of a broad spectrum of compounds including nanoparticles. In our work, we aimed to go beyond the commonly explored experimental conditions and showcase a workflow capable of unearthing fresh insights, even in well-studied research domains. The growth of AuNRs is a nonequilibrium process that remains poorly understood despite the presence of well-established seeded growth protocols. Traditional research aimed at understanding the mechanism of AuNR growth has primarily relied on altering one reaction condition at a time. While these studies are undeniably valuable, they often fail to capture the synergies between different reaction conditions, thus constraining the depth of insights they can offer. In the present study, we exploit BO, to identify diverse experimental conditions yielding AuNRs with similar spectroscopic characteristics. Notably, we identify viable and accelerated synthesis conditions involving elevated temperatures (36-40 °C) as well as high ascorbic acid concentrations. More importantly, we note that ascorbic acid and temperature can modulate each other's undesirable influences on the growth of AuNRs. Finally, by harnessing the power of interpretable ML algorithms, complemented by our deep chemical understanding, we revisited the established hierarchical relationships among reaction conditions that impact the El-Sayed-based growth of AuNRs.

Cotinuous precision separation of gold using a metal-organic framework/polymer composite

Critical metals of environmental and economic relevance can be found within complex mixtures, such as mine tailings, electronic waste and wastewater, at trace amounts. Specifically, gold is a critical metal that carries desired redox active properties in various applications, including modern electronics, medicine and chemical catalysis. Here we report the structuring of sub-micron Fe-BTC/PpPDA crystallites into larger 250μm or 500μm granules for continuous packed bed experiments for the precision separation of gold. The Structured Fe-BTC/PpPDA is highly crystalline and porous with a BET surface area of 750 m2g-1. Further, the hybrid nanocomposite material maintains its selectivity for gold ions over common inorganic interferents. The structuring approach reported prevents excessive pressure drop and ensures stability over time and operation in a packed bed column. Further, we demonstrate that the Structured Fe-BTC/PpPDA can concentrate at least 42 wt% of gold under a dynamic continuous flow operation. These findings highlight the potential of Structured Fe-BTC/PpPDA for practical applications in industry, particularly in the selective capture of gold from complex mixtures.

One-Stop Plasmonic Nanocube-Excited SERS Immunoassay Platform of Multiple Cardiac Biomarkers for Rapid Screening and Progressive Tracing of Acute Myocardial Infarction

Rapid and precise acute myocardial infarction (AMI) diagnosis is essential for preventing patient death. In addition, the complementary roles of creatine kinase muscle brain (CK-MB) and cardiac troponin I (cTnI) cardiac biomarkers in the early and late stages of AMI demand their simultaneous detection, which is difficult to implement using conventional fluorescence and electrochemical technologies. Here, a nanotechnology-based one-stop immuno-surface-enhanced Raman scattering (SERS) detection platform is reported for multiple cardiac indicators for the rapid screening and progressive tracing of AMI events. Optimal SERS is achieved using optical property-based, excitation wavelength-optimized, and high-yield anisotropic plasmonic gold nanocubes. Optimal immunoassay reaction efficiencies are achieved by increasing immobilized antibodies. Multiple simultaneous detection strategies are implemented by incorporating two different Raman reports with narrow wavenumbers corresponding to two indicators and by establishing a computational SERS mapping process to accurately detect their concentrations, irrespective of multiple enzymes in the human serum. The SERS platform precisely estimated AMI onset and progressive timing in human serum and made rapid AMI identification feasible using a portable Raman spectrometer. This integrated platform is hypothesized to significantly contribute to emergency medicine and forensic science by providing timely treatment and observation.

Mechanistic insights into C-C coupling in electrochemical CO reduction using gold superlattices

Developing in situ/operando spectroscopic techniques with high sensitivity and reproducibility is of great importance for mechanistic investigations of surface-mediated electrochemical reactions. Herein, we report the fabrication of highly ordered rhombic gold nanocube superlattices (GNSs) as substrates for surface-enhanced infrared absorption spectroscopy (SEIRAS) with significantly enhanced SEIRA effect, which can be controlled by manipulating the randomness of GNSs. Finite difference time domain simulations reveal that the electromagnetic effect accounts for the significantly improved spectroscopic vibrations on the GNSs. In situ SEIRAS results show that the vibrations of CO on the Cu2O surfaces have been enhanced by 2.4 ± 0.5 and 18.0 ± 1.3 times using GNSs as substrates compared to those on traditional chemically deposited gold films in acidic and neutral electrolytes, respectively. Combined with isotopic labeling experiments, the reaction mechanisms for C-C coupling of CO electroreduction on Cu-based catalysts are revealed using the GNSs substrates.

Quantitative Study on the Influence of Bromide Ions toward the Reduction Kinetics for Size-Tunable Palladium Nanocubes

During the preparation of nanocrystals, regulating the dosage of key additives in the reaction system and the reaction temperature commonly affects the sizes and morphologies of the products. Despite the fact that bromide ions play a pivotal role in the synthesis of palladium nanocubes (Pd NCs), there is still a lack of quantitative and in-depth research on how the ions affect the reduction kinetics of Pd precursors and further on products. In this work, Pd NCs with different sizes have been prepared under various reaction conditions coupled to a systematic mechanism study. Quantitative measurements demonstrate that the reduction processes could be considered quasi-first-order reactions, and the corresponding kinetic parameters have been obtained. Furthermore, a linear relationship is discovered between k and the average size (d) of Pd NCs. The investigation on the growth patterns of four chosen systems reveals that given reaction conditions lead to certain results with unique growth patterns.

Spike Growth on Patterned Gold Nanoparticle Scaffolds

This work reports a scaffold-templated, bottom-up synthesis of 3D anisotropic nanofeatures on periodic arrays of gold nanoparticles (AuNPs). Our method relies on substrate-bound AuNPs as large seeds with hemispherical shapes and smooth surfaces after the thermal annealing of as-fabricated particles. Spiky features were grown by immersing the patterned AuNPs into a growth solution consisting of a gold salt and Good's buffer; the number and length of spikes could be tuned by changing the solution pH and buffer concentration. Intermediate structures that informed the growth mechanism were characterized as a function of time by correlating the optical properties and spike features. Large-area (cm2) spiky AuNP arrays exhibited surface-enhanced Raman spectroscopy enhancement that was associated with increased numbers of high-aspect-ratio spikes formed on the AuNP seeds.

Gold nanoparticle-decorated earth-abundant clay nanotubes as catalyst for the degradation of phenothiazine dyes and reduction of 4-(4-nitrophenyl)morpholine

In the present work, halloysite nanotubes modified with gold nanoparticles (AuNPs-HNT) are successfully prepared by wet chemical method for the catalytic degradation of phenothiazine dyes (azure B (AZB) and toluidine blue O (TBO)) and also cleaner reduction of 4-(4-nitrophenyl)morpholine (4NM) in the sodium borohydride (NaBH4) media. The catalyst is formulated by modifying the HNT support with a 0.964% metal loading using the HNT supports modified with 3-aminopropyl-trimethoxysilane (APTMS) coupling agent to facilitate the anchoring sites to trap the AuNPs and to prevent their agglomeration/aggregation. The AuNPs-HNT catalyst is investigated for structural and morphological characterization to get insights about the formation of the catalyst for the effective catalytic reduction of dyes and 4NM. The microscopic studies demonstrate that AuNPs (2.75 nm) are decorated on the outer surface of HNT. The as-prepared AuNPs-HNT catalyst demonstrates AZB and TBO dye degradation efficiency up to 96% in 10 and 11 min, respectively, and catalytic reduction of 4NM to 4-morpholinoaniline (MAN) is achieved up to 97% in 11 min, in the presence of NaBH4 without the formation of any by-products. The pseudo-first-order rate constant (K1) value of the AuNPs-HNT catalyst for AZB, TBO, and 4NM were calculated to be 0.0078, 0.0055, and 0.0066 s-1, respectively. Moreover, the synthesized catalyst shows an excellent reusability with stable catalytic reduction for 7 successive cycles for both the dyes and 4NM. A plausible mechanism for the catalytic dye degradation and reduction of 4NM by AuNPs-HNT catalyst is proposed as well. The obtained results clearly indicate the potential of AuNPs-HNT as an efficient catalyst for the removal of dye contaminants from the aquatic environments and cleaner reduction of 4NM to MAN, insinuating future pharmaceutical applications.

From Multi- to Single-Hollow Trimetallic Nanocrystals by Ultrafast Heating

Metal nanocrystals (NCs) display unique physicochemical features that are highly dependent on nanoparticle dimensions, anisotropy, structure, and composition. The development of synthesis methodologies that allow us to tune such parameters finely emerges as crucial for the application of metal NCs in catalysis, optical materials, or biomedicine. Here, we describe a synthetic methodology to fabricate hollow multimetallic heterostructures using a combination of seed-mediated growth routes and femtosecond-pulsed laser irradiation. The envisaged methodology relies on the coreduction of Ag and Pd ions on gold nanorods (Au NRs) to form Au@PdAg core-shell nanostructures containing small cavities at the Au-PdAg interface. The excitation of Au@PdAg NRs with low fluence femtosecond pulses was employed to induce the coalescence and growth of large cavities, forming multihollow anisotropic Au@PdAg nanostructures. Moreover, single-hollow alloy AuPdAg could be achieved in high yield by increasing the irradiation energy. Advanced electron microscopy techniques, energy-dispersive X-ray spectroscopy (EDX) tomography, X-ray absorption near-edge structure (XANES) spectroscopy, and finite differences in the time domain (FDTD) simulations allowed us to characterize the morphology, structure, and elemental distribution of the irradiated NCs in detail. The ability of the reported synthesis route to fabricate multimetallic NCs with unprecedented hollow nanostructures offers attractive prospects for the fabrication of tailored high-entropy alloy nanoparticles.

Anisotropic Gold Nanomaterial Synthesis Using Peptide Facet Specificity and Timed Intervention

Thin metal particles with two-dimensional (2D) symmetry are attractive for multiple applications but are difficult to synthesize in a reproducible manner. Although molecules that selectively adsorb to facets have been used to control nanoparticle shape, there is still limited research into the temporal control of growth processes to control these structural outcomes. Moreover, much of the current research into the growth of thin 2D particles lacks mechanistic details. In this work, we study why the substitution of isoleucine for methionine in a gold-binding peptide (Z2, RMRMKMK) results in an increase in gold nanoparticle anisotropy. Nanoplatelet growth in the presence of Z2M246I (RIRIKIK) is characterized using in situ small-angle X-ray scattering (SAXS) and UV-vis spectroscopy. Fitting time-resolved SAXS profiles reveal that 10 nm-thick particles with 2D symmetry are formed within the first few minutes of the reaction. Next, through a combination of electron diffraction and molecular dynamics simulations, we show that substitution of methionine for isoleucine increases the (111) facet selectivity in Z2M246I, and we conclude that this is key to the growth of nanoplatelets. However, the potential application of nanoplatelets formed using Z2M246I is limited due to their uncontrolled lateral growth, aggregation, and rapid sedimentation. Therefore, we use a liquid-handling robot to perform temporally controlled synthesis and dynamic intervention through the addition of Z2 to nanoplatelets grown in the presence of Z2M246I at different times. UV-vis spectroscopy, dynamic light scattering, and electron microscopy show that dynamic intervention results in control over the mean size and stability of plate-like particles. Finally, we use in situ UV-vis spectroscopy to study plate-like particle growth at different times of intervention. Our results demonstrate that both the selectivity and magnitude of binding free energy toward lattices are important for controlling nanoparticle growth pathways.

Recent Advances of Seed-Mediated Growth of Metal Nanoparticles: from Growth to Applications

Unprecedented advances in metal nanoparticle synthesis have paved the way for broad applications in sensing, imaging, catalysis, diagnosis, and therapy by tuning the optical properties, enhancing catalytic performance, and improving chemical and biological properties of metal nanoparticles. The central guiding concept for regulating the size and morphology of metal nanoparticles is identified as the precise manipulation of nucleation and subsequent growth, often known as seed-mediated growth methods. However, since the growth process is sensitive not only to the metal seeds but also to capping agents, metal precursors, growth solution, growth/incubation time, reductants, and other influencing factors, the precise control of metal nanoparticle morphology is multifactorial. Further, multiple reaction parameters are entangled with each other, so it is necessary to clarify the mechanism by which each factor precisely regulates the morphology of metal nanoparticles. In this review, to exploit the generality and extendibility of metal nanoparticle synthesis, the mechanisms of growth influencing factors in seed-mediated growth methods are systematically summarized. Second, a variety of critical properties and applications enabled by grown metal nanoparticles are focused upon. Finally, the current progress and offer insights on the challenges, opportunities, and future directions for the growth and applications of grown metal nanoparticles are reviewed.

Unraveling chemical processes during nanoparticle synthesis with liquid phase electron microscopy and correlative techniques

Liquid phase transmission electron microscopy (LPTEM) has enabled unprecedented direct real time imaging of physicochemical processes during solution phase synthesis of metallic nanoparticles. LPTEM primarily provides images of nanometer scale, and sometimes atomic scale, metal nanoparticle crystallization processes, but provides little chemical information about organic surface ligands, metal-ligand complexes and reaction intermediates, and redox reactions. Likewise, complex electron beam-solvent interactions during LPTEM make it challenging to pinpoint the chemical processes, some involving exotic highly reactive radicals, impacting nanoparticle formation. Pairing LPTEM with correlative solution synthesis, ex situ chemical analysis, and theoretical modeling represents a powerful approach to gain a holistic understanding of the chemical processes involved in nanoparticle synthesis. In this feature article, we review recent work by our lab and others that has focused on elucidating chemical processes during nanoparticle synthesis using LPTEM and correlative chemical characterization and modeling, including mass and optical spectrometry, fluorescence microscopy, solution chemistry, and reaction kinetic modeling. In particular, we show how these approaches enable investigating redox chemistry during LPTEM, polymeric and organic capping ligands, metal deposition mechanisms on plasmonic nanoparticles, metal clusters and complexes, and multimetallic nanoparticle formation. Future avenues of research are discussed, including moving beyond electron beam induced nanoparticle formation by using light and thermal stimuli during LPTEM. We discuss prospects for real time LPTEM imaging and online chemical analysis of reaction intermediates using microfluidic flow reactors.

Bimetallic Nanoalloy Catalysts for Green Energy Production: Advances in Synthesis Routes and Characterization Techniques

Bimetallic Nanoalloy catalysts have diverse uses in clean energy, sensing, catalysis, biomedicine, and energy storage, with some supported and unsupported catalysts. Conventional synthetic methods for producing bimetallic alloy nanoparticles often produce unalloyed and bulky particles that do not exhibit desired characteristics. Alloys, when prepared with advanced nanoscale methods, give higher surface area, activity, and selectivity than individual metals due to changes in their electronic properties and reduced size. This review demonstrates the synthesis methods and principles to produce and characterize highly dispersed, well-alloyed bimetallic nanoalloy particles in relatively simple, effective, and generalized approaches and the overall existence of conventional synthetic methods with modifications to prepare bimetallic alloy catalysts. The basic concepts and mechanistic understanding are represented with purposely selected examples. Herein, the enthralling properties with widespread applications of nanoalloy catalysts in heterogeneous catalysis are also presented, especially for Hydrogen Evolution Reaction (HER), Oxidation Reduction Reaction (ORR), Oxygen Evolution Reaction (OER), and alcohol oxidation with a particular focus on Pt and Pd-based bimetallic nanoalloys and their numerous fields of applications. The high entropy alloy is described as a complicated subject with an emphasis on laser-based green synthesis of nanoparticles and, in conclusion, the forecasts and contemporary challenges for the controlled synthesis of nanoalloys are addressed.

Peroxidase mimics of platinum-group metals for in vitro diagnostics: opportunities and challenges

Platinum-group metal (PGM) nanostructures with peroxidase-like catalytic activities (i.e., peroxidase mimics) have been actively developed and applied to in vitro diagnostics in recent years. This article provides our viewpoints on this emerging field from the perspectives of materials science and solid-state chemistry angles. We start with an introduction to PGM peroxidase mimics, their catalytic efficiencies, and insights into catalysis from computational simulations. We then discuss chemical approaches to the synthesis of PGM peroxidase mimics with desired physicochemical parameters and catalytic properties. Then, we elaborate on general methods for functionalizing the surfaces of PGM mimics with bioreceptors. Thereafter, we highlight the applications of PGM mimics in in vitro diagnostics, emphasizing the interactions of PGM mimics with other components of a diagnostic system. We conclude this article with our opinions on the challenges and opportunities in this field.

Synthesis of Zwitterionic CsPbBr3 Nanocrystals with Controlled Anisotropy using Surface-Selective Ligand Pairs

Mechanistic studies of the morphology of lead halide perovskite nanocrystals (LHP-NCs) are hampered by a lack of generalizable suitable synthetic strategies and ligand systems. Here, the synthesis of zwitterionic CsPbBr3 NCs is presented with controlled anisotropy using a proposed "surface-selective ligand pairs" strategy. Such a strategy provides a platform to systematically study the binding affinity of capping ligand pairs and the resulting LHP morphologies. By using zwitterionic ligands (ZwL) with varying structures, majority ZwL-capped LHP NCs with controlled morphology are obtained, including anisotropic nanoplatelets and nanorods, for the first time. Combining experiments with density functional theory calculations, factors that govern the ligand binding on the different surface facets of LHP-NCs are revealed, including the steric bulkiness of the ligand, the number of binding sites, and the charge distance between binding moieties. This study provides guidance for the further exploration of anisotropic LHP-NCs.

Strain and Surface Engineering of Multicomponent Metallic Nanomaterials with Unconventional Phases

Multicomponent metallic nanomaterials with unconventional phases show great prospects in electrochemical energy storage and conversion, owing to unique crystal structures and abundant structural effects. In this review, we emphasize the progress in the strain and surface engineering of these novel nanomaterials. We start with a brief introduction of the structural configurations of these materials, based on the interaction types between the components. Next, the fundamentals of strain, strain effect in relevant metallic nanomaterials with unconventional phases, and their formation mechanisms are discussed. Then the progress in surface engineering of these multicomponent metallic nanomaterials is demonstrated from the aspects of morphology control, crystallinity control, surface modification, and surface reconstruction. Moreover, the applications of the strain- and surface-engineered unconventional nanomaterials mainly in electrocatalysis are also introduced, where in addition to the catalytic performance, the structure-performance correlations are highlighted. Finally, the challenges and opportunities in this promising field are prospected.

Tailoring Cu Electrodes for Enhanced CO2 Electroreduction through Plasma Electrolysis in Non-Conventional Phosphorus-Oxoanion-Based Electrolytes

This study presents a green, ultra-fast, and facile technique for the fabrication of micro/nano-structured and porous Cu electrodes through in-liquid plasma electrolysis using phosphorous-oxoanion-based electrolytes. Besides the preferential surface faceting, the Cu electrodes exhibit unique surface structures, including octahedral nanocrystals besides nanoporous and microporous structures, depending on the employed electrolyte. The incorporation of P-atoms into the Cu surfaces is observed. The modified Cu electrodes display increased roughness, leading to higher current densities for CO2 electroreduction reaction. The selectivity of the modified Cu electrodes towards C2 products is highest for the Cu electrodes treated in Na2 HPO3 and Na3 PO4 electrolytes, whereas those treated in Na2 H2 PO2 produce the most H2 . The Cu electrode treated in Na3 PO4 produces ethylene (23 %) at -1.1 V vs. RHE, and a comparable amount of acetaldehyde (15 %) that is typically observed for Cu(110) single crystals. The enhanced selectivity is attributed to several factors, including the surface morphology, the incorporation of phosphorus into the Cu structure, and the formation of Cu(110) facets. Our results not only advance our understanding of the influence of the electrolyte's nature on the plasma electrolysis of Cu electrodes, but also underscores the potential of in-liquid plasma treatment for developing efficient Cu electrocatalysts for sustainable CO2 conversion.

A Surfactant-Free and General Strategy for the Synthesis of Bimetallic Core-Shell Nanocrystals on Reduced Graphene Oxide through Targeted Photodeposition

Tunable physicochemical properties of bimetallic core-shell heterostructured nanocrystals (HNCs) have shown enormous potential in electrocatalytic reactions. In many cases, HNCs are required to load on supports to inhibit catalyst aggregation. However, the introduction of supports during the process of growing core-shell HNCs makes the synthesis much more complicated and difficult to control precisely. Herein, we reported a universal photochemical synthetic strategy for the controlled synthesis of well-defined surfactant-free core-shell metal HNCs on a reduced graphene oxide (rGO) support, which was assisted by the fine control of photogenerated electrons directly transferring to the targeted metal seeds via rGO and the precisely tuned adsorption capacity of the added second metal precursors. The surface photovoltage microscopy (SPVM) platform proved that photogenerated electrons flowed through rGO to Pd particles under illumination. We have successfully synthesized 24 different core-shell metal HNCs, i.,e., M_A@M_B (M_A = Pd, Au, and Pt; M_B = Au, Ag, Pt, Pd, Ir, Ru, Rh, Ni and Cu), on the rGO supports. The as-prepared Pd@Cu core-shell HNCs showed outstanding performance in the electrocatalytic reduction of CO₂ to CH₄. This work could shed light on the controlled synthesis of more functional bimetallic nanostructured materials on diverse supports for various applications.

Shape tunability of copper nanocrystals deposited on nanorods

The significant role of metal particle geometry in dictating catalytic activity, selectivity, and stability is well established in heterocatalysis. However, this topic is rarely explored in semiconductor-metal hybrid photocatalytic systems, primarily due to the lack of synthetic control over this feature. Herein, we present a new synthetic route for the deposition of metallic Cu nanoparticles with spherical, elliptic, or cubic geometrical shapes, which are selectively grown on one side of the well-established CdSe@CdS nanorod photocatalytic system. An additional multipod morphology in which several nanorod branches are combined on a single Cu domain is presented as well. Cu is an earth-abundant low-cost catalyst known to promote a diverse gallery of organic transformations and is an excellent thermal and electrical conductor with interesting plasmonic properties. Its deposition on cadmium chalcogenide nanostructures is enabled here via mitigation of the reaction kinetics such that the cation exchange reaction is prevented. The structural diversity of these sophisticated nanoscale hybrid systems lays the foundations for shape-activity correlation studies and employment in various applications.

Ligand Chemistry in Antitumor Theranostic Nanoparticles

Theranostic nanoparticles' potential in tumor treatment has been widely acknowledged thanks to their capability of integrating multifaceted functionalities into a single nanosystem. Theranostic nanoparticles are typically equipped with an inorganic core with exploitable physical properties for imaging and therapeutic functions, bioinert coatings for improved biocompatibility and immunological stealth, controlled drug-loading-release modules, and the ability to recognize specific cell type for uptake. Integrating multiple functionalities in a single nanosized construct require sophisticated molecular design and precise execution of assembly procedures. Underlying the multifunctionality of theranostic nanoparticles, ligand chemistry plays a decisive role in translating theoretical designs into fully functionalized theranostic nanoparticles. The ligand hierarchy in theranostic nanoparticles is usually threefold. As they serve to passivate the nanoparticle's surface, capping ligands form the first layer directly interfacing with the crystalline lattice of the inorganic core. The size and shape of nanoparticles are largely determined by the molecular property of capping ligands so that they have profound influences on the nanoparticles' surface chemistry and physical properties. Capping ligands are mostly chemically inert, which necessitates the presence of additional ligands for drug loading and tumor targeting. The second layer is commonly utilized for drug loading. Therapeutic drugs can either be covalently conjugated onto the capping layer or noncovalently loaded onto nanoparticles via drug-loading ligands. Drug-loading ligands need to be equally versatile in properties to accommodate the diversity of drugs. Biodegradable moieties are often incorporated into drug-loading ligands to enable smart drug release. With the aid of targeting ligands which usually stand the tallest on the nanoparticle surface to seek and bind to their corresponding receptors on the target, theranostic nanoparticles can preferentially accumulate at the tumor site to attain a higher precision and quantity for drug delivery. In this Account, the properties and utilities of representative capping ligands, drug-loading ligands, and targeting ligands are reviewed. Since these types of ligands are often assembled in close vicinity to each other, it is essential for them to be chemically compatible and able to function in tandem with each other. Relevant conjugation strategies and critical factors with a significant impact on ligands' performance on nanoparticles are discussed. Representative theranostic nanoparticles are presented to showcase how different types of ligands function synergistically from a single nanosystem. Finally, the technological outlook of evolving ligand chemistry on theranostic nanoparticles is provided.

In Situ and Emerging Transmission Electron Microscopy for Catalysis Research

Catalysts are the primary facilitator in many dynamic processes. Therefore, a thorough understanding of these processes has vast implications for a myriad of energy systems. The scanning/transmission electron microscope (S/TEM) is a powerful tool not only for atomic-scale characterization but also in situ catalytic experimentation. Techniques such as liquid and gas phase electron microscopy allow the observation of catalysts in an environment conducive to catalytic reactions. Correlated algorithms can greatly improve microscopy data processing and expand multidimensional data handling. Furthermore, new techniques including 4D-STEM, atomic electron tomography, cryogenic electron microscopy, and monochromated electron energy loss spectroscopy (EELS) push the boundaries of our comprehension of catalyst behavior. In this review, we discuss the existing and emergent techniques for observing catalysts using S/TEM. Challenges and opportunities highlighted aim to inspire and accelerate the use of electron microscopy to further investigate the complex interplay of catalytic systems.

Quantification, Exchange, and Removal of Surface Ligands on Noble-Metal Nanocrystals

ConspectusSurface ligands are vital to the colloidal synthesis of noble-metal nanocrystals with well-controlled sizes and shapes for various applications. The surface ligands not only dictate the formation of nanocrystals with diverse shapes but also serve as a colloidal stabilizer to prevent the suspended nanocrystals from aggregation during their synthesis or storage. By leveraging the facet selectivity of some surface ligands, one can further control the sites for growth or galvanic replacement to transform presynthesized nanocrystals into complex structures that are otherwise difficult to fabricate using conventional methods. Furthermore, the presence of surface ligands on nanocrystals also facilitates their applications in areas such as sensing, imaging, nanomedicine, and self-assembly. Despite their popular use in enhancing the properties of nanocrystals and thus optimizing their performance in a wide variety of applications, it remains a major challenge to quantitatively determine the coverage density of ligand molecules, not to mention the difficulty of substituting or removing them without compromising the surface structure and aggregation state of the nanocrystals.In this Account, we recapitulate our efforts in developing methods capable of qualitatively or quantitatively measuring, exchanging, and removing the surface ligands adsorbed on noble-metal nanocrystals. We begin with an introduction to the typical interactions between ligand molecules and surface atoms, followed by a discussion of the Langmuir model that can be used to describe the adsorption of surface ligands. It is also emphasized that the adsorption process may become very complex in the case of a polymeric ligand due to the variations in binding configuration and chain conformation. We then highlight the capabilities of various spectroscopy methods to analyze the adsorbed ligands qualitatively or quantitatively. Specifically, surface-enhanced Raman scattering, Fourier transform infrared, and X-ray photoelectron spectroscopy are three examples of qualitative methods that can be used to confirm the absence or presence of a surface ligand. On the other hand, ultraviolet-visible spectroscopy and inductively coupled plasma mass spectrometry can be used for quantitative measurements. Additionally, the coverage density of a ligand can be derived by analyzing the morphological changes during nanocrystal growth. We then discuss how the ligands present on the surface of metal nanocrystals can be exchanged directly or indirectly to meet the requirements of different applications. The former can be done using a ligand with stronger binding, whereas the latter is achieved by introducing a sacrificial shell to the surface of the nanocrystals. Furthermore, we highlight three additional strategies besides simple washing to remove the surface ligands, including calcination, heating in a solution, and UV-ozone treatment. Finally, we showcase three applications of metal nanocrystals in nanomedicine, tumor targeting, and self-assembly by taking advantage of the diversity of surface ligands bearing different functional groups. We also offer perspectives on the challenges and opportunities in realizing the full potential of surface ligands.

Bridging Colloidal and Electrochemical Nanoparticle Growth with In Situ Electrochemical Measurements

ConspectusProspective applications involving the electrification of industrial chemical processes and electrical energy to chemical fuels interconversion as part of the energy transition to renewable energy sources have led to an increasing need for highly tailored nanostructures immobilized on electrode surfaces. Control of surface facet structure across material compositions is of particular importance for ensuring performance in such applications. Colloidal methods for producing shaped nanoparticles in solution are abundant, particularly for noble metals. However, significant technical challenges remain with respect to rationally designing syntheses for the novel compositions and morphologies required to sustainably enable the above technological advances as well as in developing methods for uniformly and reproducibly dispersing colloidally synthesized nanostructures on electrode surfaces. The direct synthesis of nanoparticles on electrodes using chemical reduction approaches remains challenging, though recent advances have been made for certain materials and structures. Electrochemical nanoparticle synthesis─where an applied current or potential instead of a chemical reducing agent drives the redox chemistry of nanoparticle growth─is poised to play an important role in advancing the fabrication of nanostructured electrodes. Specifically, this Account focuses on the colloidal-inspired design of electrochemical syntheses and the interplay between colloidal and electrochemical approaches in terms of understanding the fundamental chemical reaction mechanisms of nanoparticle growth. An initial discussion of the development of electrochemical particle syntheses that incorporate colloidal synthetic tools highlights the promising emergent capabilities that result from blending these two approaches. Furthermore, it demonstrates how existing colloidal syntheses can be directly translated to electrochemical growth on a conductive surface using real-time electrochemical measurements of the chemistry of the growth solution. Measuring the open circuit potential of a colloidal synthesis over time and then replicating that measured potential during electrochemical deposition leads to the formation of the same nanoparticle shape. These in situ open circuit and chronopotentiometric measurements also give fundamental insight about the changing chemical environment during particle growth. We highlight how these time-resolved electrochemical measurements, as well as correlated spectroelectrochemical monitoring of particle formation kinetics, enable the extraction of information regarding mechanisms of particle formation that is difficult to obtain using other approaches. This information can be translated back into colloidal synthesis design via a directed, intentional approach to synthetic development. We additionally explore the added flexibility of synthetic design for methods involving electrochemically driven reduction as compared to the use of chemical reducing agents. The Account concludes with a brief perspective on potential future directions in both fundamental studies and synthetic development enabled by this emerging integrated electrochemical approach.

Exploring the Bottom-Up Growth of Anisotropic Gold Nanoparticles from Substrate-Bound Seeds in Microfluidic Reactors

We developed an unconventional seed-mediated in situ synthetic method, whereby gold nanostars are formed directly on the internal walls of microfluidic reactors. The dense plasmonic substrate coatings were grown in microfluidic channels with different geometries to elucidate the impacts of flow rate and profile on reagent consumption, product morphology, and density. Nanostar growth was found to occur in the flow-limited regime and our results highlight the possibility of creating shape gradients or incorporating multiple morphologies in the same microreactor, which is challenging to achieve with traditional self-assembly. The plasmonic-microfluidic platforms developed herein have implications for a broad range of applications, including cell culture/sorting, catalysis, sensing, and drug/gene delivery.

Quantitatively controlled electrophoretic deposition of nanocrystal films from non-aqueous suspensions

This study presents a novel method to correlate the mass and charge transfer kinetics during the electrophoretic deposition of nanocrystal films by using a purpose-built double quartz crystal microbalance combined with simultaneous current-measurement. Our data support a multistep process for film formation: generation of charged nanocrystal flux, charge transfer at the electrode, and polarization of neutral nanocrystals near the electrode surface. The polarized particles are then subject to dielectrophoretic forces that reduce diffusion away from the interface, generating a sufficiently high neutral particle concentration at the interface to form a film. The correlation of mass and charge transfer enables quantification of the nanocrystal charge, the fraction of charged nanocrystals, and the initial sticking coefficient of the particles. These quantities permit calculation of the film thickness, providing a theoretical basis for using concentration and voltage as process parameters to grow films of targeted thicknesses.