High-Yield Exfoliation of Ultrathin Two-Dimensional Ternary Chalcogenide Nanosheets for Highly Sensitive and Selective Fluorescence DNA Sensors

Extremely Enhanced Photoluminescence in MoS2-Derived Quantum Sheets

Molybdenum disulfide (MoS2) quantum sheets (QSs) are attractive for applications due to their tunable energy band structures and optical and electronic properties. The photoluminescence quantum yield (PLQY) of MoS2 QSs achieved by mechanical and liquid exfoliation and chemical vapor deposition is low. Some studies have reported that chemical treatment and elemental doping can improve the PLQY of transition metal dichalcogenides (TMDs), but this is limited by complex instruments and reactions. In this study, a heat treatment method based on a polar solvent is reported to improve the PLQY and photoluminescence (PL) intensity of MoS2 QSs at room temperature. The absolute PLQY of treated MoS2 QSs is increased to 18.5%, and the PL intensity is increased by a factor of 64. This method is also effective for tungsten disulfide (WS2) QSs. The PL enhancement of QSs is attributed to oxidation of the edges. Such passivation/deformation of MoS2 QSs facilitates the radiative route rather than the nonradiative route, resulting in extreme enhancement of the PL. Our work could provide novel insights/routes toward the PL enhancement of TMD QSs.

Quantitatively Exploring Giant Optical Anisotropy of Quasi-One-Dimensional Ta2NiS5

Optical anisotropy offers a heightened degree of flexibility in shaping optical properties and designing cutting-edge devices. Quasi-one-dimensional Ta2NiS5, with giant optical anisotropy, has been used in the development of new lasers and sensors. In this research endeavor, we successfully acquired the complete dielectric tensor of Ta2NiS5, utilizing the advanced technique of Mueller matrix spectroscopic ellipsometry, enabling a rigorous quantitative assessment of its optical anisotropy. The results indicate that Ta2NiS5 demonstrates giant birefringence and dichroism, with Δnmax = 1.54 and Δkmax = 1.80. This pursuit also delves into the fundamental underpinnings of this optical anisotropy, drawing upon a fusion of first-principles calculations and critical points analysis. The anisotropy of Ta2NiS5 arises from differences in optical transitions in different directions and is shown to be due to van Hove singularities without exciton effects. Its giant optical anisotropy is expected to be useful in the design of novel optical devices, and the revelation of the physical mechanism facilitates the modulation of its optical properties.

Morphological Evaluation of Supramolecular Soft Materials Obtained through Co-Assembly Processes

Low-molecular-weight gelators (LMWGs) are compounds with an intrinsic tendency to self-assemble forming various supramolecular architectures via non-covalent interactions. Considering that the development of supramolecular assemblies through the synergy of molecules is not entirely understood at the molecular level, this study introduced a Fmoc-short peptide and four Fmoc-amino acids as building blocks for the self-assembly/co-assembly process. Hence, we investigated the formation of supramolecular gels starting from the molecular aggregation following two triggering approaches: solvent/co-solvent method and pH switch. The complex morphological analysis (POM, AFM, and STEM) offered an insight into the spontaneous formation of well-ordered nanoaggregates. Briefly, POM and AFM images demonstrated that self-assembled gels present various morphologies like dendrimer, spherulite, and vesicle, whereas all co-assembled supramolecular systems exhibit fibrillar morphologies as a result of the interaction between co-partners of each system. STEM study has confirmed that the molecules interact and join together, finally forming a fibrous network, an aspect seen in both self-assembled and co-assembled gels. XRD allowed the determination of the molecular arrangement. The study emphasized that the Fmoc motif protected the amino groups and facilitated gelation through additional π-π interactions.

Temperature dependent charge carrier dynamics in 2D ternary Cu2MoS4 nanoflakes: An effect of electron-phonon coupling

Two-dimensional transition metal chalcogenides (2D TMCs) like MoS2, WS2 etc., have established significant dominance in the field of nanoscience and nanotechnology, owing to their unique properties like strong light-matter interaction, high carrier mobility, large photo-responsivity etc. Despite the widespread utilization of these binary TMCs, their potential in the advancement of the optoelectronic research is limited due to the constraints in band tuning and charge carrier lifetime. To overcome these limitations, ternary transition metal chalcogenides have emerged as promising alternatives. Although, the optical properties of these materials have never been explored properly. Herein, we have investigated one such promising member of this group, Cu2MoS4 (CMS) using both steady state and time-resolved spectroscopic techniques. The material exhibits a broad range of visible light absorption, peaking at 576 nm. Photoluminescence spectroscopy confirmed the presence of both band gap emission and trap state-mediated emissions. Transient absorption spectroscopy unraveled the excited state charge carrier dynamics of CMS in sub-ps timescale, upon irradiation of visible light. We found significant influence of the trap mediated recombination, while Auger process being dominant at high charge density. We extended our study in a wide temperature range (5-300 K), which reveals the impact of electron-phonon coupling strength on the band gap and charge carrier dynamics of this material. This detailed study would draw more attention toward the unexplored optical properties of ternary 2D chalcogenides and will open new avenues for the construction of 2D material-based optical devices.

Microenvironment Restruction of Emerging 2D Materials and their Roles in Therapeutic and Diagnostic Nano-Bio-Platforms

Engineering advanced therapeutic and diagnostic nano-bio-platforms (NBPFs) have emerged as rapidly-developed pathways against a wide range of challenges in antitumor, antipathogen, tissue regeneration, bioimaging, and biosensing applications. Emerged 2D materials have attracted extensive scientific interest as fundamental building blocks or nanostructures among material scientists, chemists, biologists, and doctors due to their advantageous physicochemical and biological properties. This timely review provides a comprehensive summary of creating advanced NBPFs via emerging 2D materials (2D-NBPFs) with unique insights into the corresponding molecularly restructured microenvironments and biofunctionalities. First, it is focused on an up-to-date overview of the synthetic strategies for designing 2D-NBPFs with a cross-comparison of their advantages and disadvantages. After that, the recent key achievements are summarized in tuning the biofunctionalities of 2D-NBPFs via molecularly programmed microenvironments, including physiological stability, biocompatibility, bio-adhesiveness, specific binding to pathogens, broad-spectrum pathogen inhibitors, stimuli-responsive systems, and enzyme-mimetics. Moreover, the representative therapeutic and diagnostic applications of 2D-NBPFs are also discussed with detailed disclosure of their critical design principles and parameters. Finally, current challenges and future research directions are also discussed. Overall, this review will provide cutting-edge and multidisciplinary guidance for accelerating future developments and therapeutic/diagnostic applications of 2D-NBPFs.

MXene-Based Aptameric Fluorosensor for Sensitive and Rapid Detection of COVID-19

The severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2)-caused COVID-19 pandemic has rapidly escalated into the largest global health emergency, which pushes to develop detection kits for the detection of COVID-19 with high sensitivity, specificity, and fast analysis. Here, aptamer-functionalized MXene nanosheet is demonstrated as a novel bionanosensor that detects COVID-19. Upon binding to the spike receptor binding domain of SARS-CoV-2, the aptamer probe is released from MXene surface restoring the quenched fluorescence. The performances of the fluorosensor are evaluated using antigen protein, cultured virus, and swab specimens from COVID-19 patients. It is evidenced that this sensor can detect SARS-CoV-2 spike protein at final concentration of 38.9 fg mL^-1 and SARS-CoV-2 pseudovirus (limit of detection: 7.2 copies) within 30 min. Its application for clinical samples analysis is also demonstrated successfully. This work offers an effective sensing platform for sensitive and rapid detection of COVID-19 with high specificity.

Self-supported trimetallic NiZnLa nanosheets on hierarchical porous graphene oxide-polymer composite fibers for enhanced phosphate removal from water

Phosphate-induced water eutrophication has attracted global attention. Fabricating adsorbents with both high phosphate adsorption affinity and accessible separation property is challenging. Herein, PG@NZL, a hierarchical nanocomposite fibrous membrane, was fabricated via in-situ growth of La-doped NiZn-LDH (NiZnLa_0.1) over electrospun graphene oxide-polymer composite fibers (PG). The porous surface of the PG fibers provided abundant anchor sites for the vertical self-supported growth of NiZnLa_0.1 nanosheets, contributing to a high surface area. The La-doped NiZnLa_0.1 trimetallic LDH achieved a much higher adsorption capacity than NiZn-LDH. The negative adsorption energy (-1.45 eV), calculated with DFT, confirmed its spontaneous adsorption potential for phosphate. Interestingly, the PG fibers contributed to oxygen vacancies and the metal center electronic structure evolution of NiZnLa_0.1, thus strengthening the coordination with phosphate. Mechanistic analysis revealed that the high adsorption capacity of PG@NZL is attributed to its superior anion exchange property, oxygen vacancies, and inner-sphere complexation. Therefore, the flexible and easily separated PG@NZL nanocomposite fibrous membrane is a promising adsorbent for effectively treating phosphate-bearing wastewater.

Defect-Rich Molybdenum Sulfide Quantum Dots for Amplified Photoluminescence and Photonics-Driven Reactive Oxygen Species Generation

Transition metal dichalcogenide (TMD) quantum dots (QDs) with defects have attracted interesting chemistry due to the contribution of vacancies to their unique optical, physical, catalytic, and electrical properties. Engineering defined defects into molybdenum sulfide (MoS₂ ) QDs is challenging. Herein, by applying a mild biomineralization-assisted bottom-up strategy, blue photoluminescent MoS₂ QDs (B-QDs) with a high density of defects are fabricated. The two-stage synthesis begins with a bottom-up synthesis of original MoS₂ QDs (O-QDs) through chemical reactions of Mo and sulfide ions, followed by alkaline etching that creates high sulfur-vacancy defects to eventually form B-QDs. Alkaline etching significantly increases the photoluminescence (PL) and photo-oxidation. An increase in defect density is shown to bring about increased active sites and decreased bandgap energy; which is further validated with density functional theory calculations. There is strengthened binding affinity between QDs and O₂ due to lower gap energy (∆E_ST ) between S₁ and T₁ , accompanied with improved intersystem crossing (ISC) efficiency. Lowered gap energy contributes to assist e^- -h⁺ pair formation and the strengthened binding affinity between QDs and ³ O₂ . Defect engineering unravels another dimension of material properties control and can bring fresh new applications to otherwise well characterized TMD nanomaterials.

Free-standing homochiral 2D monolayers by exfoliation of molecular crystals

Two-dimensional materials with monolayer thickness and extreme aspect ratios are sought for their high surface areas and unusual physicochemical properties¹. Liquid exfoliation is a straightforward and scalable means of accessing such materials², but has been restricted to sheets maintained by strong covalent, coordination or ionic interactions^3-10. The exfoliation of molecular crystals, in which repeat units are held together by weak non-covalent bonding, could generate a greatly expanded range of two-dimensional crystalline materials with diverse surfaces and structural features. However, at first sight, these weak forces would seem incapable of supporting such intrinsically fragile morphologies. Against this expectation, we show here that crystals composed of discrete supramolecular coordination complexes can be exfoliated by sonication to give free-standing monolayers approximately 2.3 nanometres thick with aspect ratios up to approximately 2,500:1, sustained purely by apolar intermolecular interactions. These nanosheets are characterized by atomic force microscopy and high-resolution transmission electron microscopy, confirming their crystallinity. The monolayers possess complex chiral surfaces derived partly from individual supramolecular coordination complex components but also from interactions with neighbours. In this respect, they represent a distinct type of material in which molecular components are all equally exposed to their environment, as if in solution, yet with properties arising from cooperation between molecules, because of crystallinity. This unusual nature is reflected in the molecular recognition properties of the materials, which bind carbohydrates with strongly enhanced enantiodiscrimination relative to individual molecules or bulk three-dimensional crystals.

Liquid-Phase Exfoliation of Ta2NiS5 and Its Application in Near-Infrared Mode-Locked Fiber Lasers with Evanescent Field Interactions and Passively Q-Switched Bulk Laser

We report on the application of a 1 μm solid-state passively Q-switched (PQS) laser and 1, 1.5 μm mode-locked (ML) fiber lasers based on ternary chalcogenide Ta2NiS5 saturable absorber (SA), which were successfully fabricated by liquid-phase exfoliation method (LPE). The nonlinear absorption of the Ta2NiS5-SA was characterized by 0.32 GW/cm2 and 0.25 GW/cm2 saturation intensities with 7.3% and 5.1% modulations depths at 1 μm and 1.5 μm, respectively. A PQS solid-state laser operating at 1.0 μm has been realized with the Ta2NiS5-SA. The maximum average output power, shortest pulse width, pulse energy, and pulse peak power from the PQS laser are 0.257 W, 180 ns, 1.265 μJ, and 7 W. Moreover, highly stable femtosecond laser centered at 1.5 μm, and picosecond centered at 1 μm, ML fiber lasers were obtained using the Ta2NiS5-SA. A 70 dB signal-to-noise ML laser with a pulse duration of 781 fs was observed in the telecommunication window, which is better than the duration of the previously reported lasers based on Ta2NiS5. The corresponding maximum single pulse energy and peak power are 0.977 nJ and 1251 W, respectively. The Ta2NiS5-SA fabricated by the LPE method was applied in near-infrared (NIR) ML fiber lasers (evanescent field interactions) and PQS bulk lasers. The results indicate that Ta2NiS5-SA prepared by the LPE method can be applied in a 1 μm bulk PQS laser and improved by the new combination mode (evanescent field interactions) for better output performance of the fiber laser.

2D Heterostructures for Ubiquitous Electronics and Optoelectronics: Principles, Opportunities, and Challenges

A grand family of two-dimensional (2D) materials and their heterostructures have been discovered through the extensive experimental and theoretical efforts of chemists, material scientists, physicists, and technologists. These pioneering works contribute to realizing the fundamental platforms to explore and analyze new physical/chemical properties and technological phenomena at the micro-nano-pico scales. Engineering 2D van der Waals (vdW) materials and their heterostructures via chemical and physical methods with a suitable choice of stacking order, thickness, and interlayer interactions enable exotic carrier dynamics, showing potential in high-frequency electronics, broadband optoelectronics, low-power neuromorphic computing, and ubiquitous electronics. This comprehensive review addresses recent advances in terms of representative 2D materials, the general fabrication methods, and characterization techniques and the vital role of the physical parameters affecting the quality of 2D heterostructures. The main emphasis is on 2D heterostructures and 3D-bulk (3D) hybrid systems exhibiting intrinsic quantum mechanical responses in the optical, valley, and topological states. Finally, we discuss the universality of 2D heterostructures with representative applications and trends for future electronics and optoelectronics (FEO) under the challenges and opportunities from physical, nanotechnological, and material synthesis perspectives.

Facile Synthesis of Pd-Ir Nanocubes for Biosensing

Displaying extremely high peroxidase-like activity and uniform cubic structure enclosed by (100) facets, Pd-Ir nanocubes are an attractive nanomaterial for bioanalysis. However, there exists a great challenge to deposit atomic layers of Ir on the surface of Pd nanocubes due to the relatively low energy barrier of homogeneous nucleation of Ir atoms compared to heterogeneous nucleation. Here, a simple and surfactant-free approach is presented to synthesize Pd-Ir nanocubes with atomic Ir shell thickness in an aqueous solution at room temperature. Biomolecules such as antibodies and nucleic acids have free access to the surface of Pd-Ir nanocubes. Applications of Pd-Ir nanocubes in immunoassays and aptamer-based biosensors are realized, exploiting the excellent peroxidase activity and fluorescence quenching ability of Pd-Ir nanocubes. This work makes a significant step forward towards the practical utility of Pd-Ir nanocubes in bioanalysis.

Two-Dimensional GeC2 with Tunable Electronic and Carrier Transport Properties and a High Current ON/OFF Ratio

In this study, we present that 2D tetrahex-GeC₂ materials possess novel electronic and carrier transport properties based on density functional theory computations combined with the nonequilibrium Green's function method. We show that under the 4% (-4%) in-plane expansion (compression) along the a-direction (b-direction) of the tetrahex-GeC₂ monolayer, the bandgap can be enlarged to a desirable 1.26 eV (1.32 eV), close to that of silicon. The carrier transport properties of both the sub-10 nm tetrahex-GeC₂ monolayer and the bilayer show strong anisotropy within the bias from -1 to 1 V. The current ON (a-direction)/OFF (b-direction) ratio amounts to 10⁵ for the tetrahex-GeC₂ monolayer. A striking negative differential conductance arises with the maximum I_peak/I_valley on the order of 10⁴ under the 4% uniaxial expansion along the b-direction of the tetrahex-GeC₂ monolayer. Overall, the 2D tetrahex-GeC₂ monolayer and bilayer possess highly tunable electronic and carrier transport properties under uniaxial strain, which can be exploited for potential applications in nanoelectronics.

Recent advances in the exonuclease III-assisted target signal amplification strategy for nucleic acid detection

The detection of nucleic acids has become significantly important in molecular diagnostics, gene therapy, mutation analysis, forensic investigations and biomedical development, and so on. In recent years, exonuclease III (Exo III) as an enzyme in the 3'-5' exonuclease family has evolved as a frequently used technique for signal amplification of low level DNA target detection. Different from the traditional target amplification strategies, the Exo III-assisted amplification strategy has been used for target DNA detection through directly amplifying the amounts of signal reagents. The Exo III-assisted amplification strategy has its unique advantages and characters, because the character of non-specific recognition of Exo III can overcome the limitation of a target-to-probe ratio of 1 : 1 in the traditional nucleic acid hybridization assay and acquire higher sensitivity. In this review, we selectively discuss the recent advances in the Exo III-assisted amplification strategy, including the amplification strategy integrated with nanomaterials, biosensors, hairpin probes and other nucleic acid detection methods. We also discuss the strengths and limitations of each strategy and methods to overcome the limitations.

Methods of hexagonal boron nitride exfoliation and its functionalization: covalent and non-covalent approaches

The exfoliation of two-dimensional (2D) hexagonal boron nitride nanosheets (h-BNNSs) from bulk hexagonal boron nitride (h-BN) materials has received intense interest owing to their fascinating physical, chemical, and biological properties. Numerous exfoliation techniques offer scalable approaches for harvesting single-layer or few-layer h-BNNSs. Their structure is very comparable to graphite, and they have numerous significant applications owing to their superb thermal, electrical, optical, and mechanical performance. Exfoliation from bulk stacked h-BN is the most cost-effective way to obtain large quantities of few layer h-BN. Herein, numerous methods have been discussed to achieve the exfoliation of h-BN, each with advantages and disadvantages. Herein, we describe the existing exfoliation methods used to fabricate single-layer materials. Besides exfoliation methods, various functionalization methods, such as covalent, non-covalent, and Lewis acid-base approaches, including physical and chemical methods, are extensively described for the preparation of several h-BNNS derivatives. Moreover, the unique and potent characteristics of functionalized h-BNNSs, like enhanced solubility in water, improved thermal conductivity, stability, and excellent biocompatibility, lead to certain extensive applications in the areas of biomedical science, electronics, novel polymeric composites, and UV photodetectors, and these are also highlighted.

Differences and Similarities of Photocatalysis and Electrocatalysis in Two-Dimensional Nanomaterials: Strategies, Traps, Applications and Challenges

Photocatalysis and electrocatalysis have been essential parts of electrochemical processes for over half a century. Recent progress in the controllable synthesis of 2D nanomaterials has exhibited enhanced catalytic performance compared to bulk materials. This has led to significant interest in the exploitation of 2D nanomaterials for catalysis. There have been a variety of excellent reviews on 2D nanomaterials for catalysis, but related issues of differences and similarities between photocatalysis and electrocatalysis in 2D nanomaterials are still vacant. Here, we provide a comprehensive overview on the differences and similarities of photocatalysis and electrocatalysis in the latest 2D nanomaterials. Strategies and traps for performance enhancement of 2D nanocatalysts are highlighted, which point out the differences and similarities of series issues for photocatalysis and electrocatalysis. In addition, 2D nanocatalysts and their catalytic applications are discussed. Finally, opportunities, challenges and development directions for 2D nanocatalysts are described. The intention of this review is to inspire and direct interest in this research realm for the creation of future 2D nanomaterials for photocatalysis and electrocatalysis.

Self-Powered Broadband Photodetector and Sensor Based on Novel Few-Layered Pd3(PS4)2 Nanosheets

Optoelectronics and sensing devices are of enormous importance in our modern lives, which has propelled the scientific community to explore new two-dimensional (2D) nanomaterials to meet the requirements of future devices. Herein, we present the exfoliation of palladium thiophosphate (Pd₃(PS₄)₂) by mechanical shear force exfoliation. The Pd₃(PS₄)₂-based photoelectrochemical (PEC) device demonstrated self-powered broadband photodetection in the range of 385-940 nm with an unprecedented responsivity of 2 A W^-1 and a specific detectivity of about 8.67 × 10¹¹ cm Hz^1/2 W^-1 under the illumination of 420 nm LED light. The crucial parameters such as photoresponsivity, response, and recovery time of the device can be controlled by an externally applied voltage and the analyte concentration. Moreover, Pd₃(PS₄)₂-based vapor-sensing devices exhibited frequency-dependent selective acetone sensing in the presence of other organic vapors with an ultrafast response and a recovery time of less than 1 s. Finally, the photocatalytic activity of Pd₃(PS₄)₂ was revealed, which can be attributed to the presence of an appropriate band alignment with the catalytic activity of Pd. This novel material with the aforementioned fascinating phenomenon will pave the way toward practical future applications in optoelectronics and sensing.

Multielement 2D layered material photodetectors

The pronounced quantum confinement effects, outstanding mechanical strength, strong light-matter interactions and reasonably high electric transport properties under atomically thin limit have conjointly established 2D layered materials (2DLMs) as compelling building blocks towards the next generation optoelectronic devices. By virtue of the diverse compositions and crystal structures which bring about abundant physical properties, multielement 2DLMs (ME2DLMs) have become a bran-new research focus of tremendous scientific enthusiasm. Herein, for the first time, this review provides a comprehensive overview on the latest evolution of ME2DLM photodetectors. The crystal structures, synthesis, and physical properties of various experimentally realized ME2DLMs as well as the development in metal-semiconductor-metal photodetectors are comprehensively summarized by dividing them into narrow-bandgap ME2DLMs (including Bi₂O₂X (X = S, Se, Te), EuMTe₃(M = Bi, Sb), Nb₂XTe₄(X = Si, Ge), Ta₂NiX₅(X = S, Se), M₂PdX₆(M = Ta, Nb; X = S, Se), PbSnS₂), moderate-bandgap ME2DLMs (including CuIn₇Se₁₁, CuTaS₃, GaGeTe, TlMX₂(M = Ga, In; X = S, Se)), wide-bandgap ME2DLMs (including BiOX (X = F, Cl, Br, I), MPX₃(M = Fe, Ni, Mn, Cd, Zn; X = S, Se), ABP₂X₆(A = Cu, Ag; B = In, Bi; X = S, Se), Ga₂In₄S₉), as well as topological ME2DLMs (MIrTe₄(M = Ta, Nb)). In the last section, the ongoing challenges standing in the way of further development are underscored and the potential strategies settling them are proposed, which is aimed at navigating the future advancement of this fascinating domain.

Near-infrared inorganic nanomaterial-based nanosystems for photothermal therapy

The development of robust materials for treating diseases through non-invasive photothermal therapy (PTT) has attracted increasing attention in recent years. Among various types of nanomaterials, inorganic nanomaterials with strong absorption in the near-infrared (NIR) window can be employed as high-efficiency photothermal agents to treat cancer and bacterial infections. In addition, inorganic nanomaterials can be easily combined with other drugs or chemical reagents to construct multifunctional nanomaterials to cascade stimulation responses, enhance therapeutic effects, and perform precise medical treatments. In this review, focusing on the latest developments of inorganic nanomaterials in photothermal therapy, we firstly introduced the light-to-heat conversion mechanism of inorganic nanomaterials. Secondly, we summarized the application of common inorganic nanomaterials, such as metallic nanoparticles, transition metal oxide nanoparticles and two dimensional (2D) nanosheets. In addition, the strategy of developing multifunctional nano-platforms with excellent biocompatibility as well as good targeted capability was also expounded. Finally, challenges and new perspectives for designing effective inorganic nanomaterial-based nanosystems for photothermal assisted therapy were also discussed.

Recent Advances in 2D Group VB Transition Metal Chalcogenides

2D materials have received considerable research interest owing to their abundant material systems and remarkable properties. Among them, 2D group VB transition metal chalcogenides (GVTMCs) stand out as emerging 2D metallic materials and significantly broaden the research scope of 2D materials. 2D GVTMCs have great advantages in electrical transport, 2D magnetism, charge density wave, sensing, catalysis, and charge storage, making them attractive in the fields of functional devices and energy chemistry. In this review, the recent progress of 2D GVTMCs is summarized systematically from fundamental properties, growth methodologies to potential applications. The challenges and prospects are also discussed for future research in this field.

High-Yield Exfoliation of Ultrathin 2D Ni3 Cr2 P2 S9 and Ni3 Cr2 P2 Se9 Nanosheets

Multinary layered 2D nanomaterials can exhibit distinct physicochemical properties and innovative applications as compared to binary 2D nanomaterials due to their unique crystal structures. However, it still remains a challenge for the high-yield preparation of high-quality multinary 2D nanosheets. Here, the high-yield and large-scale production of two quaternary metal thiophosphate nanosheets are reported, i.e., Ni₃ Cr₂ P₂ S₉ and Ni₃ Cr₂ P₂ Se₉ , via the liquid exfoliation of their layered bulk crystals. The exfoliated single-crystalline Ni₃ Cr₂ P₂ S₉ nanosheets, with a lateral size ranging from a few hundred nanometers to a few micrometers and thickness of 1.4 ± 0.2 nm, can be easily used to prepare flexible thin films via a simple vacuum filtration process. As a proof-of-concept application, the fabricated thin film is used as a supercapacitor electrode with good specific capacitance. These high-yield, large-scale, solution-processable quaternary metal thiophosphate nanosheets could also be promising in other applications like biosensors, cancer therapies, and flexible electronics.

Targeted Sub-Attomole Cancer Biomarker Detection Based on Phase Singularity 2D Nanomaterial-Enhanced Plasmonic Biosensor

A zero-reflection-induced phase singularity is achieved through precisely controlling the resonance characteristics using two-dimensional nanomaterials. An atomically thin nano-layer having a high absorption coefficient is exploited to enhance the zero-reflection dip, which has led to the subsequent phase singularity and thus a giant lateral position shift. We have improved the detection limit of low molecular weight molecules by more than three orders of magnitude compared to current state-of-art nanomaterial-enhanced plasmonic sensors. Detection of small cancer biomarkers with low molecular weight and a low concentration range has always been challenging yet urgent in many clinical applications such as diagnosing early-stage cancer, monitoring treatment and detecting relapse. Here, a highly enhanced plasmonic biosensor that can overcome this challenge is developed using atomically thin two-dimensional phase change nanomaterial. By precisely engineering the configuration with atomically thin materials, the phase singularity has been successfully achieved with a significantly enhanced lateral position shift effect. Based on our knowledge, it is the first experimental demonstration of a lateral position signal change > 340 μm at a sensing interface from all optical techniques. With this enhanced plasmonic effect, the detection limit has been experimentally demonstrated to be 10^-15 mol L^-1 for TNF-α cancer marker, which has been found in various human diseases including inflammatory diseases and different kinds of cancer. The as-reported novel integration of atomically thin Ge₂Sb₂Te₅ with plasmonic substrate, which results in a phase singularity and thus a giant lateral position shift, enables the detection of cancer markers with low molecular weight at femtomolar level. These results will definitely hold promising potential in biomedical application and clinical diagnostics.

2D layered SiP as anisotropic nonlinear optical material

Two-dimensional (2D) material of silicon phosphide (SiP) has recently been shown as a promising optical material with large band gap, fast photoresponse and strong anisotropy. However, the nonlinear optical properties of 2D SiP have not been investigated yet. Here, the thickness-dependent in-plane anisotropic third-harmonic generation (THG) from the mechanically exfoliated 2D layered SiP flakes is reported. The crystal orientation of the SiP flake is determined by the angle-resolved polarized Raman spectroscopy. The angular dependence of the THG emission with respect to the incident linear polarization is found to be strongly anisotropic with the two-fold polarization dependence pattern. Furthermore, the effect of the SiP flake thickness on the THG power is analyzed.

A ratiometric electrochemiluminescence strategy based on two-dimensional nanomaterial-nucleic acid interactions for biosensing and logic gates operation

Two-dimensional (2D) nanomaterial-nucleic acid interactions have been widely used in the construction of fluorescent sensors, but they are rarely used in the construction of electrochemiluminescent (ECL) sensors and have never been used in the design of ratiometric ECL sensors. Therefore, a ratiometric ECL sensing platform was developed in this study based on the ECL resonance energy transfer (ECL-RET) of graphitic carbon nitride nanosheets (GCNNs)/Ru(bpy)₃²⁺ donor/acceptor pair. The 2D GCNNs showed much weaker affinity to the long dsDNA duplexes formed by hybridization chain reaction (HCR) than Ru(bpy)₃²⁺-lableled fuel hairpin DNAs (H1 and H2) for HCR. Therefore, the target-initiated HCR resulted in the luminescence enhancement of the GCNNs at 460 nm and the luminescence attenuation of the Ru(bpy)₃²⁺ at 610 nm. By measuring the I_{460 nm}/I_{610 nm} ratios, quantitative analysis of microRNA-133a was realized with a limit of detection of 0.41 pM. In addition, this ECL-RET sensing platform can be easily extended to detect metal ions or aptamer substrates by simply redesigning helper DNAs without changing the sequences of fuel hairpin DNAs. Moreover, due to the programmability of HCR, a series of sensitive logic gates ("OR", "INHIBIT", "AND", "NAND" and "INHIBIT-OR") based on the ECL-RET ratiometry can be constructed and responded to as low as 100 pM of Hg²⁺ or Ag⁺.

Cascade synthesis and optoelectronic applications of intermediate bandgap Cu3VSe4 nanosheets

Two-dimensional (2D) ternary materials recently generated interest in optoelectronics and energy-related applications, alongside their binary counterparts. To date, only a few naturally occurring layered 2D ternary materials have been explored. The plethora of benefits owed to reduced dimensionality prompted exploration of expanding non-layered ternary chalcogenides into the 2D realm. This work presents a templating method that uses 2D transition metal dichalcogenides as initiators to be converted into the corresponding ternary chalcogenide upon addition of copper, via a solution-phase synthesis, conducted in high boiling point solvents. The process starts with preparation of VSe₂ nanosheets, which are next converted into Cu₃VSe₄ sulvanite nanosheets (NSs) which retain the 2D geometry while presenting an X-ray diffraction pattern identical with the one for the bulk Cu₃VSe₄. Both the scanning electron microscopy and transmission microscopy electron microscopy show the presence of quasi-2D morphology. Recent studies of the sulfur-containing sulvanite Cu₃VS₄ highlight the presence of an intermediate bandgap, associated with enhanced photovoltaic (PV) performance. The Cu₃VSe₄ nanosheets reported herein exhibit multiple UV–Vis absorption peaks, related to the intermediate bandgaps similar to Cu₃VS₄ and Cu₃VSe₄ nanocrystals. To test the potential of Cu₃VSe₄ NSs as an absorber for solar photovoltaic devices, Cu₃VSe₄ NSs thin-films deposited on FTO were subjected to photoelectrochemical testing, showing p-type behavior and stable photocurrents of up to ~ 0.036 mA/cm². The photocurrent shows a ninefold increase in comparison to reported performance of Cu₃VSe₄ nanocrystals. This proves that quasi-2D sulvanite nanosheets are amenable to thin-film deposition and could show superior PV performance in comparison to nanocrystal thin-films. The obtained electrical impedance spectroscopy signal of the Cu₃VSe₄ NSs-FTO based electrochemical cell fits an equivalent circuit with the circuit elements of solution resistance (R_s), charge-transfer resistance (R_ct), double-layer capacitance (C_dl), and Warburg impedance (W). The estimated charge transfer resistance value of 300 Ω cm² obtained from the Nyquist plot provides an insight into the rate of charge transfer on the electrode/electrolyte interface.

Uniform palladium nanosheets for fluorimetric detection of circulating tumor DNA

Fluorescence quenching property of two-dimensional (2D) nanosheets (NSs) have received extensively attention in the construction of novel biosensing platform. However, the heterogeneity of the wide-size distribution and inefficient fluorescence quenching capacity limit its wide practical applications. Herein, for the first time, we report a novel fluorescent biosensor based on uniform palladium NSs (Pd NSs) with excellent fluorescence quenching efficiency and differential affinity toward ssDNA versus dsDNA and combination with a pair of DNA detection probes with fluorophore for detecting circulating tumor DNA (ctDNA). The DNA detection probes are facilitated to adsorbed to the surface of Pd NSs, leading to efficient fluorescence quench. In the presence of target DNA, it can be linked by T4 DNA ligase to form long DNA duplex structures, which display weak affinity toward Pd NSs, producing the fluorescence recovery. The remarkable fluorescence quenching efficiency and ssDNA/dsDNA differential affinity of Pd NSs make it have a good detection ability without signal amplification. The result indicates that this facile but cost-effective strategy holds great promise in bioanalysis.

Dual Function Based on Switchable Colorimetric Luminescence for Water and Temperature Sensing in Two-Dimensional Metal-Organic Framework Nanosheets

A simple, rapid, highly selective, and real-time determination of water is urgently required for preventing danger from water contamination in materials. Herein, the excited-state proton transfer (ESPT) concept-based luminescent sensor [Cd₂(2,5-tpt)(4,5-idc)(H₂O)₄] (1) (2,5-tpt = 2,5-dihydroxyterephthalic acid and 4,5-idc = 4,5-imidazoledicarboxylic acid) has been designed for discriminative detection via enol-keto tautomerism. To improve the sensitivity, two-dimensional (2D) nanosheets of 1 have been synthesized by top-down liquid ultrasonic exfoliation technology for sensing water in dimethylformamide, which lead to fast detection (<30 s), high selectivity, broad-range detection (0-50% v/v), and a low detection limit value (0.25% v/v). This sensor can serve dual sensing mechanisms along with a luminescent color change via shifted emission (green→yellow) in low water content and a turn-off method in high water content. For ease of use, the test-strip paper-based 2D nanosheets of 1 have been prepared and applied for water detection with long-term stability, pH stability, and good reusability. On-site water detection in real time can be evaluated using a smartphone color-scanning application for quantitative scanometric assays coupled with test-strip paper-based 2D nanosheets of 1. Also, 1 can be utilized for a colorimetric luminescent thermometer in the ranges of physiological and high temperature with good linearity and recyclability.

In-plane anisotropic third-harmonic generation from germanium arsenide thin flakes

A newly introduced two-dimensional (2D) layered germanium arsenide (GeAs) has attracted growing interest due to its promising highly in-plane anisotropic crystal structure and electronic properties for photonic and optoelectronic applications. The potential of 2D layered GeAs for many applications such as anisotropic photodetection, electronics, superconductivity and thermoelectricity is being investigated in recent studies. However, the intrinsic nonlinear optical properties of 2D layered GeAs have not been explored yet. Here, thickness- and incident polarization-dependent in-plane anisotropic third-harmonic generation (THG) from the mechanically exfoliated thin GeAs flakes is reported. Furthermore, the effect of the flake thickness on the THG conversion efficiency is shown to find the optimal thickness range for high conversion efficiency. The polarization state of the emitted THG signal is also analyzed by measuring the Stokes parameters with different polarization states of the pump beam to demonstrate the capability of controlling the intensity and polarization of TH emission. Our results will create new opportunities for advancing anisotropic optical devices used for future photonic integration, optical communication and optical information processing.

An unprecedented polyhydroxycarboxylic acid ligand bridged multi-EuIII incorporated tellurotungstate and its luminescence properties

The first polyhydroxycarboxylic acid ligand bridged multi-EuIII-incorporated tellurotungstate K14H10[Eu4(H2O)4W6(H2glu)4O12(B-α-TeW9O33)4]·60H2O (H6glu = d-gluconic acid) (1) was synthesized via an organic ligand-driven self-assembly strategy. The polyhydroxycarboxylic acid ligand bridged tetrameric polyoxoanion [Eu4(H2O)4W6(H2glu)4O12(B-α-TeW9O33)4]24- in 1 can be viewed as an aggregation of four trivacant Keggin [B-α-TeW9O33]8- fragments and an innovative heterometallic [Eu4(H2O)4W6(H2glu)4O12]8+ cluster, in which four high-coordinate polyhydroxy flexible H2glu4- ligands chelate W and Eu centers through carboxyl and hydroxyl groups, giving rise to a heterometallic cluster. The hexagonal packing of the tetrameric polyoxoanions in 1 along the c axis provides excellent porous channels, which greatly increases the specific surface area of the whole framework and may be of benefit for fluorescence sensing in aqueous solution. 1 can function as a "turn-off" luminescence sensor to detect Cu2+ ions in aqueous solution. The limit of detection (LOD) of the 1-sensor is 8.82 × 10-6 mM, which is the lowest among the reported polyoxometalate-based fluorescence sensors. As for the Cu2+-quenching system, it can function as an "off-on" sensor to detect cysteine in an aqueous system, affording a LOD of 1.75 × 10-4 mM. This work opens up an avenue to broaden the applications of polyoxometalate-based materials in the optical intelligence detection field.

Interfacial Synthesis of a Monolayered Fluorescent Two-Dimensional Polymer through Dynamic Imine Chemistry

A fluorescent monolayered two-dimensional polymer (2DP) containing both tetraphenylethylene (TPE) and imine linkages is synthesized at air-water interface using the Langmuir-Blodgett method. We designed TPE-based monomers with long distances between the TPE and the imine linkages to avoid the charge transfer and therefore keep the fluorescence. A monolayered 2DP provided with more than 104 μm2 in domain size and around 0.8 nm thickness was obtained through a successive Schiff base reaction at air-water interface. The nanostructures and fluorescent property of 2DP films were characterized by optical microscopy, SEM, TEM, AFM and fluorescence spectrum. Most importantly, the tip-enhanced Raman spectroscopy (TERS) was utilized here to confirm the success of the polycondensation of monolayered 2DP.

In-plane anisotropic electronics based on low-symmetry 2D materials: progress and prospects

Low-symmetry layered materials such as black phosphorus (BP) have been revived recently due to their high intrinsic mobility and in-plane anisotropic properties, which can be used in anisotropic electronic and optoelectronic devices. Since the anisotropic properties have a close relationship with their anisotropic structural characters, especially for materials with low-symmetry, exploring new low-symmetry layered materials and investigating their anisotropic properties have inspired numerous research efforts. In this paper, we review the recent experimental progresses on low-symmetry layered materials and their corresponding anisotropic electrical transport, magneto-transport, optoelectronic, thermoelectric, ferroelectric, and piezoelectric properties. The boom of new low-symmetry layered materials with high anisotropy could open up considerable possibilities for next-generation anisotropic multifunctional electronic devices.

Exonuclease III-Regulated Target Cyclic Amplification-Based Single Nucleotide Polymorphism Detection Using Ultrathin Ternary Chalcogenide Nanosheets

Herein, we report that the ternary chalcogenide nanosheet exhibits different affinity toward oligonucleotides with different lengths and efficiently quenches the fluorescence of dye-labeled DNA probes. Based on these findings, as a proof-of-concept application, the ternary chalcogenide nanosheet is used as a target cyclic amplification biosensor, showing high specificity in discriminating single-base mismatch. This simple strategy is fast and sensitive for the single nucleotide polymorphism detection. Ultralow detection limit of unlabeled target (250 fM) and high discrimination ratio (5%) in the mixture of perfect match (mutant-type) and single-base mismatch (wild-type) target are achieved. This sensing method is extensively compatible for the single nucleotide polymorphism detection in clinical samples, making it a promising tool for the mutation-based clinical diagnostic and genomic research.

2D nanostructures beyond graphene: preparation, biocompatibility and biodegradation behaviors

The research advances of the preparation, biocompatibility and biodegradation of 2D nanomaterials are introduced. The prospects and challenges of the biomedical applications of 2D nanomaterials are summarized.

Ultra-thin metal-organic framework nanoribbons

Structure engineering of metal-organic frameworks (MOFs) at the nanometer scale is attracting increasing interest due to their unique properties and new functions that normally cannot be achieved in bulk MOF crystals. Here, we report the preparation of ultra-thin MOF nanoribbons (NRBs) by using metal-hydroxide nanostructures as the precursors. Importantly, this general method can be used to synthesize various kinds of ultra-thin MOF NRBs, such as MBDC (M = Co, Ni; BDC = 1,4-benzenedicarboxylate), NiCoBDC, CoTCPP (TCPP = tetrakis(4-carboxyphenyl)porphyrin) and MIL-53(Al) NRBs. As a proof-of-concept application, the as-prepared ultra-thin CoBDC NRBs have been successfully used as a fluorescent sensing platform for DNA detection, which exhibited excellent sensitivity and selectivity. The present strategy might open an avenue to prepare MOF nanomaterials with new structures and unique properties for various promising applications.

Functionalized Hybridization of 2D Nanomaterials

The discovery of graphene and subsequent verification of its unique properties have aroused great research interest to exploit diversified graphene-analogous 2D nanomaterials with fascinating physicochemical properties. Through either physical or chemical doping, linkage, adsorption, and hybridization with other functional species into or onto them, more novel/improved properties are readily created to extend/expand their functionalities and further achieve great performance. Here, various functionalized hybridizations by using different types of 2D nanomaterials are overviewed systematically with emphasis on their interaction formats (e.g., in-plane or inter plane), synergistic properties, and enhanced applications. As the most intensely investigated 2D materials in the post-graphene era, transition metal dichalcogenide nanosheets are comprehensively investigated through their element doping, physical/chemical functionalization, and nanohybridization. Meanwhile, representative hybrids with more types of nanosheets are also presented to understand their unique surface structures and address the special requirements for better applications. More excitingly, the van der Waals heterostructures of diverse 2D materials are specifically summarized to add more functionality or flexibility into 2D material systems. Finally, the current research status and faced challenges are discussed properly and several perspectives are elaborately given to accelerate the rational fabrication of varied and talented 2D hybrids.

Highly Luminescent and Self-Enhanced Electrochemiluminescence of Tris(bipyridine) Ruthenium(II) Nanohybrid and Its Sensing Application for Label-Free Detection of MicroRNA

Inspired by the coreactive activity of carbon nanodots (CDs) and branched polyethylenimine (BPEI) toward electrochemiluminescence (ECL) of Ru(bpy)₃²⁺, a highly luminescent and self-enhanced ECL nanohybrid (Ru-BCDs) was synthesized through covalently linking BPEI-coated carbon dots (BCDs) with Tris (4,4'-dicarboxylic acid-2,2'-bipyridyl) ruthenium(II) dichloride (Ru(dcbpy)₃²⁺). The composition and morphological characterization demonstrated that the spherical Ru-BCDs particles with 12.1 ± 1.4 nm diameter were obtained. The enhanced ECL property of Ru-BCDs was proved to originate from the dual coreactive contribution of BPEI and CDs as coreactants as well as the intramolecular electron transfer process, which could shorten the electron transfer path and minimize energy loss. A carbon nitride nanosheet (CNN) was utilized to stabilize the Ru-BCDs-modified glassy carbon electrode, which greatly improved the stability of solid-state ECL. By utilizing the affinity discrepancy of the CNN to single-stranded and double-stranded nucleic acids, a label-free and signal-on ECL biosensor was constructed for the determination of microRNA-133a (miR-133a), a potential biomarker of acute myocardial infarction. The designed biosensor exhibited good performance of miR-133a detection with a detection limit of 60 fM and could be used for the detection of real human serum with satisfactory results. The self-enhanced ECL nanohybrid with distinguished ECL efficiency holds a promising prospect in biosensing and bioimaging applications.