Structure Sensitivity of the Oxygen Evolution Reaction Catalyzed by Cobalt(II,III) Oxide

Unifying thermochemistry concepts in computational heterogeneous catalysis

Thermophysical properties of adsorbates and gas-phase species define the free energy landscape of heterogeneously catalyzed processes and are pivotal for an atomistic understanding of the catalyst performance. These thermophysical properties, such as the free energy or the enthalpy, are typically derived from density functional theory (DFT) calculations. Enthalpies are species-interdependent properties that are only meaningful when referenced to other species. The widespread use of DFT has led to a proliferation of new energetic data in the literature and databases. However, there is a lack of consistency in how DFT data is referenced and how the associated enthalpies or free energies are stored and reported, leading to challenges in reproducing or utilizing the results of prior work. Additionally, DFT suffers from exchange-correlation errors that often require corrections to align the data with other global thermochemical networks, which are not always clearly documented or explained. In this review, we introduce a set of consistent terminology and definitions, review existing approaches, and unify the techniques using the framework of linear algebra. This set of terminology and tools facilitates the correction and alignment of energies between different data formats and sources, promoting the sharing and reuse of ab initio data. Standardization of thermochemistry concepts in computational heterogeneous catalysis reduces computational cost and enhances fundamental understanding of catalytic processes, which will accelerate the computational design of optimally performing catalysts.

Lanthanum-Promoted Electrocatalyst for the Oxygen Evolution Reaction: Unique Catalyst or Oxide Deconstruction?

A conventional performance metric for electrocatalysts that promote the oxygen evolution reaction (OER) is the current density at a given overpotential. However, the assumption that increased current density at lower overpotentials indicates superior catalyst design is precarious for OER catalysts in the working environment, as the crystalline lattice is prone to deconstruction and amorphization, thus greatly increasing the concentration of catalytic active sites. We show this to be the case for La3+ incorporation into Co3O4. Powder X-ray diffraction (PXRD), Raman spectroscopy and extended X-ray absorption fine structure (EXAFS) reveal smaller domain sizes with decreased long-range order and increased amorphization for La-modified Co3O4. This lattice deconstruction is exacerbated under the conditions of OER as indicated by operando spectroscopies. The overpotential for OER decreases with increasing La3+ concentration, with maximum activity achieved at 17% La incorporation. HRTEM images and electron diffraction patterns clearly show the formation of an amorphous overlayer during OER catalysis that is accelerated with La3+ addition. O 1s XPS spectra after OER show the loss of lattice-oxide and an increase in peak intensities associated with hydroxylated or defective O-atom environments, consistent with Co(O)x(OH)y species in an amorphous overlayer. Our results suggest that improved catalytic activity of oxides incorporated with La3+ ions (and likely other metal ions) is due to an increase in the number of terminal octahedral Co(O)x(OH)y edge sites upon Co3O4 lattice deconstruction, rather than enhanced intrinsic catalysis.

Breaking the Bottleneck of Activity and Stability of RuO2-Based Electrocatalysts for Acidic Oxygen Evolution

Electrochemical acidic oxygen evolution reaction (OER) is an important part for water electrolysis utilizing a proton exchange membrane (PEM) apparatus for industrial H2 production. RuO2 has garnered considerable attention as a potential acidic OER electrocatalyst. However, the overoxidation of Ru active sites under high potential conditions is usually harmful for activity and stability, thereby posing a challenge for large-scale commercialization, which needs effective strategies to circumvent the leaching of Ru and further activate Ru sites. Herein, a Mini-Review is presented to summarize the recent developments regarding the activation and stabilization of the Ru active sites and lattice oxygen through the modulation of the d-band center, coordination environment, bridged heteroatoms, and vacancy engineering, as well as structural protection strategies and reaction pathway optimization to promote the acidic OER activity and stability of RuO2-based electrocatalysts. This Mini-Review offers a profound understanding of the design of RuO2-based electrocatalysts with greatly enhanced acidic OER performances.

Highly efficient mobility, separation and charge transfer in black SnO2-TiO2 structures with co-catalysts: the key step for the photocatalytic hydrogen evolution

Oxygen vacancies and co-catalysts enhance photocatalytic hydrogen production by improving the charge carrier separation. Herein, the black SnO2-TiO2 structure (BST) was synthesized for the first time by two consecutive methods. First, the sol-gel nucleation method allowed TiO2 to form on the SnO2 nanoparticles, creating a strong interaction and direct contact between them. Subsequently, this structure was reduced by NaBH4 during thermal treatment, generating (Ti3+/Sn2+) states to form the BST. Then, 2 wt% of Co, Cu or Pd was impregnated onto BST. The results showed that the activity raised with the presence of Ti3+/Sn2+ states, reaching a hydrogen generation rate of 147.50 μmol g-1 h-1 with BST in comparison with the rate of 99.50 μmol g-1 h-1 for white SnO2-TiO2. On the other hand, the interaction of the co-catalysts with the BST structure helped to increase the photocatalytic hydrogen production rates: 154.10 μmol g-1 h-1, 384.18 μmol g-1 h-1 and 480.20 μmol g-1 h-1 for cobalt-BST, copper-BST and palladium-BST, respectively. The results can be associated with the creation of Ti3+/Sn2+ at the BST interface that changes the lifetime of the charge carrier, improving the separation of photogenerated electrons and holes and the co-catalysts in the structures move the flat band position and increasing the photocurrent response to having electrons with greater reducing power.

Emerging Atomistic Modeling Methods for Heterogeneous Electrocatalysis

Heterogeneous electrocatalysis lies at the center of various technologies that could help enable a sustainable future. However, its complexity makes it challenging to accurately and efficiently model at an atomic level. Here, we review emerging atomistic methods to simulate the electrocatalytic interface with special attention devoted to the components/effects that have been challenging to model, such as solvation, electrolyte ions, electrode potential, reaction kinetics, and pH. Additionally, we review relevant computational spectroscopy methods. Then, we showcase several examples of applying these methods to understand and design catalysts relevant to green hydrogen. We also offer experimental views on how to bridge the gap between theory and experiments. Finally, we provide some perspectives on opportunities to advance the field.

Exploring Cu-Doped Co3O4 Bifunctional Oxygen Electrocatalysts for Aqueous Zn-Air Batteries

The efficiency of oxygen electrocatalysis is a key factor in diverse energy domain applications, including the performance of metal-air batteries, such as aqueous Zinc (Zn)-air batteries. We demonstrate here that the doping of cobalt oxide with optimal amounts of copper (abbreviated as Cu-doped Co3O4) results in a stable and efficient bifunctional electrocatalyst for oxygen reduction (ORR) and evolution (OER) reactions in aqueous Zn-air batteries. At high Cu-doping concentrations (≥5%), phase segregation occurs with the simultaneous presence of Co3O4 and copper oxide (CuO). At Cu-doping concentrations ≤5%, the Cu ion resides in the octahedral (Oh) site of Co3O4, as revealed by X-ray diffraction (XRD)/Raman spectroscopy investigations and molecular dynamics (MD) calculations. The residence of Cu@Oh sites leads to an increased concentration of surface Co3+-ions (at catalytically active planes) and oxygen vacancies, which is beneficial for the OER. Temperature-dependent magnetization measurements reveal favorable d-orbital configuration (high eg occupancy ≈ 1) and a low → high spin-state transition of the Co3+-ions, which are beneficial for the ORR in the alkaline medium. The influence of Cu-doping on the ORR activity of Co3O4 is additionally accounted in DFT calculations via interactions between solvent water molecules and oxygen vacancies. The application of the bifunctional Cu-doped (≤5%) Co3O4 electrocatalyst resulted in an aqueous Zn-air battery with promising power density (=84 mW/cm2), stable cyclability (over 210 cycles), and low charge/discharge overpotential (=0.92 V).

Understanding the reaction mechanism and kinetics of photocatalytic oxygen evolution on CoOx-loaded bismuth vanadate

Photocatalytic water splitting for green hydrogen production is hindered by the sluggish kinetics of oxygen evolution reaction (OER). Loading a co-catalyst is essential for accelerating the kinetics, but the detailed reaction mechanism and role of the co-catalyst are still obscure. Here, we focus on cobalt oxide (CoOx) loaded on bismuth vanadate (BiVO4) to investigate the impact of CoOx on the OER mechanism. We employ photoelectrochemical impedance spectroscopy and simultaneous measurements of photoinduced absorption and photocurrent. The reduction of V5+ in BiVO4 promotes the formation of a surface state on CoOx that plays a crucial role in the OER. The third-order reaction rate with respect to photohole charge density indicates that reaction intermediate species accumulate in the surface state through a three-electron oxidation process prior to the rate-determining step. Increasing the excitation light intensity onto the CoOx-loaded anode improves the photoconversion efficiency significantly, suggesting that the OER reaction at dual sites in an amorphous CoOx(OH)y layer dominates over single sites. Therefore, CoOx is directly involved in the OER by providing effective reaction sites, stabilizing reaction intermediates, and improving the charge transfer rate. These insights help advance our understanding of co-catalyst-assisted OER to achieve efficient water splitting.

Direct Dioxygen Radical Coupling Driven by Octahedral Ruthenium-Oxygen-Cobalt Collaborative Coordination for Acidic Oxygen Evolution Reaction

The acidic oxygen evolution reaction (OER) has long been the bottleneck of proton exchange membrane water electrolyzers given its harsh oxidative and corrosive environments. Herein, we suggest an effective strategy to greatly enhance both the acidic OER activity and stability of Co3O4 spinel by atomic Ru selective substitution on the octahedral Co sites. The resulting highly symmetrical octahedral Ru-O-Co collaborative coordination with strong electron coupling effect enables the direct dioxygen radical coupling OER pathway. Indeed, both experiments and theoretical calculations reveal a thermodynamically breakthrough heterogeneous diatomic oxygen mechanism. Additionally, the active Ru-O-Co units are well-maintained upon the acidic OER thanks to the electron transfer from surrounding electron-enriched tetrahedral Co atoms via bridging oxygen bonds that suppresses the overoxidation and thus dissolution of active Ru and Co species. Consequently, the prepared catalyst, even with a low Ru mass loading of ca. 42.8 μg cm-2, exhibits an attractive acidic OER performance with a low overpotential of 200 mV and a low potential decay rate of 0.45 mV h-1 at 10 mA cm-2. Our work suggests an effective strategy to significantly enhance both the acidic OER activity and stability of low-cost electrocatalysts.

Atomically Dispersed Pt-Doped Co3 O4 Spinel Nanoparticles Embedded in Polyhedron Frames for Robust Propane Oxidation at Low Temperature

This study adopts a facile and effective in situ encapsulation-oxidation strategy for constructing a coupling catalyst composed of atomically dispersed Pt-doped Co₃ O₄ spinel nanoparticles (NPs) embedded in polyhedron frames (PFs) for robust propane total oxidation. Benefiting from the abundant oxygen vacancies and more highly valent active Co³⁺ species caused by the doping of Pt atoms as well as the confinement effect, the optimized 0.2Pt-Co₃ O₄ NPs/PFs catalyst exhibits excellent propane catalytic activity with low T₉₀ (184 °C), superior apparent reaction rate (21.62×10⁸ (mol g_cat ^-1 s^-1 )), low apparent activation energy (E_a = 17.89 kJ mol^-1 ), high turnover frequency ( 811×10⁷ (mol g_cat ^-1 s^-1 )) as well as good stability. In situ diffuse reflectance infrared Fourier transform spectroscopy and density functional theory calculations indicate that the doping of Pt atoms enhances the oxygen activation ability, and decreases the energy barrier required for CH bond breaking, thus improving the deep oxidation process of the intermediate species. This study opens up new ideas for constructing coupling catalysts from atomic scale with low cost to enhance the activation of oxygen molecules and the deep oxidation of linear short chain alkanes at low temperature.

Morphology-Dependent Electrocatalytic Behavior of Cobalt Chromite toward the Oxygen Evolution Reaction in Acidic and Alkaline Medium

Exploiting an affordable, durable, and high-performance electrocatalyst for the oxygen evolution reaction (OER) under lower pH condition (acidic) is highly challengeable and much attractive toward the hydrogen-based energy technologies. A spinel CoCr₂O₄ is observed as a potential noble-metal-free candidate for OER in alkaline medium. The presence of Cr further leads to electronic structure modulation of Co₃O₄ and thereby greatly increases the corrosive resistance toward OER in acidic environment. Herein, a typical CoCr₂O₄ with three different morphologies was synthesized for the very first time and employed as an electrocatalyst for OER in alkaline (1 M KOH) and acidic (0.5 M H₂SO₄) medium. Moreover, different morphologies display a different intrinsic exposed active site and thereby display different electrocatalytic activities. Likewise, the CoCr₂O₄ Mic (synthesized by the microwave heating method) displays a higher catalytic activity toward OER and delivers a low overpotential of 293 and 290 mV to attain 10 mA/cm² current density and smaller Tafel slope values of 40 and 151 mV/dec, respectively, in alkaline and acidic environment than the synthesized CoCr₂O₄ Wet (wet-chemically synthesized) and CoCr₂O₄ Hyd (hydrothermally synthesized). Moreover, CoCr₂O₄ Mic exhibits a long-term durability of 24 h (1 M KOH) and 10.5 h (0.5 M H₂SO₄). The optimized Co-O bond energy in OER condition makes the CoCr₂O₄ Mic superior than the CoCr₂O₄ Hyd and CoCr₂O₄ Wet. Moreover, the substitution of Cr induces the electron delocalization around the Co active species and thereby, positive shifting of the redox potential leads to providing an optimal binding energy for OER intermediates. Also, interestingly, this work represents a catalytic activity trend by a simple experimental result without any complex theoretical calculation. The morphology-dependent electrocatalytic activity obtained in this work will provide a new strategy in the field of electrochemical conversion and energy storage application.

Unravelling faradaic electrochemical efficiencies over Fe/Co spinel metal oxides using surface spectroscopy and microscopy techniques

Cobalt and iron metal-based oxide catalysts play a significant role in energy devices. To unravel some interesting parameters, we have synthesized metal oxides of cobalt and iron (i.e. Fe₂O₃, Co₃O₄, Co₂FeO₄ and CoFe₂O₄), and measured the effect of the valence band structure, morphology, size and defects in the nanoparticles towards the electrocatalytic hydrogen evolution reaction (HER), the oxygen evolution reaction (OER) and the oxygen reduction reaction (ORR). The compositional variations in the cobalt and iron precursors significantly alter the particle size from 60 to <10 nm and simultaneously the shape of the particles (cubic and spherical). The Tauc plot obtained from the solution phase ultraviolet (UV) spectra of the nanoparticles showed band gaps of 2.2, 2.3, 2.5 and 2.8 eV for Fe₂O₃, Co₃O₄, Co₂FeO₄ and CoFe₂O₄, respectively. Further, the valence band structure and work function analysis using ultraviolet photoelectron spectroscopy (UPS) and core level X-ray photoelectron spectroscopy (XPS) analyses provided better structural insight into metal oxide catalysts. In the Co₃O₄ system, the valence band structure favors the HER and Fe₂O₃ favors the OER. The composites Co₂FeO₄ and CoFe₂O₄ show a significant change in their core level (O 1s, Co 2p and Fe 2p spectra) and valence band structure. Co₃O₄ shows an overpotential of 370 mV against 416 mV for Fe₂O₃ at a current density of 2 mA cm^-2 for the HER. Similarly, Fe₂O₃ shows an overpotential of 410 mV against the 435 mV for Co₃O₄ at a current density of 10 mA cm^-2 for the OER. However, for the ORR, Co₃O₄ shows 70 mV improvement in the half-wave potential against Fe₂O₃. The composites (Co₂FeO₄ and CoFe₂O₄) display better performance compared to their respective parent oxide systems (i.e., Co₃O₄ and Fe₂O₃, respectively) in terms of the ORR half-wave potential, which can be attributed to the presence of the oxygen vacancies over the surface in these systems. This was further corroborated in density functional theory (DFT) simulations, wherein the oxygen vacancy formation on the surface of CoFe₂O₄(001) was calculated to be significantly lower (∼50 kJ mol^-1) compared to Co₃O₄ (001). The band diagram of the nanoparticles constructed from the various spectroscopic measurements with work function and band gap provides in-depth understanding of the electrocatalytic process.

Surface Design Strategy of Catalysts for Water Electrolysis

Hydrogen, a new energy carrier that can replace traditional fossil fuels, is seen as one of the most promising clean energy sources. The use of renewable electricity to drive hydrogen production has very broad prospects for addressing energy and environmental problems. Therefore, many researchers favor electrolytic water due to its green and low-cost advantages. The electrolytic water reaction comprises the oxygen evolution reaction (OER) and the hydrogen evolution reaction (HER). Understanding the OER and HER mechanisms in acidic and alkaline processes contributes to further studying the design of surface regulation of electrolytic water catalysts. The OER and HER catalysts are mainly reviewed for defects, doping, alloying, surface reconstruction, crystal surface structure, and heterostructures. Besides, recent catalysts for overall water splitting are also reviewed. Finally, this review paves the way to the rational design and synthesis of new materials for highly efficient electrocatalysis.

Operando Identification of the Reversible Skin Layer on Co3O4 as a Three-Dimensional Reaction Zone for Oxygen Evolution

Co oxides and oxyhydroxides have been studied extensively in the past as promising electrocatalysts for the oxygen evolution reaction (OER) in neutral to alkaline media. Earlier studies showed the formation of an ultrathin CoO_x(OH)_y skin layer on Co₃O₄ at potentials above 1.15 V vs reversible hydrogen electrode (RHE), but the precise influence of this skin layer on the OER reactivity is still under debate. We present here a systematic study of epitaxial spinel-type Co₃O₄ films with defined (111) orientation, prepared on different substrates by electrodeposition or physical vapor deposition. The OER overpotential of these samples may vary up to 120 mV, corresponding to two orders of magnitude differences in current density, which cannot be accounted for by differences in the electrochemically active surface area. We demonstrate by a careful analysis of operando surface X-ray diffraction measurements that these differences are clearly correlated with the average thickness of the skin layer. The OER reactivity increases with the amount of formed skin layer, indicating that the entire three-dimensional skin layer is an OER-active interphase. Furthermore, a scaling relationship between the reaction centers in the skin layer and the OER activity is established. It suggests that two lattice sites are involved in the OER mechanism.

The Restructuring-Induced CoO x Catalyst for Electrochemical Water Splitting

Restructuring is an important yet less understood phenomenon in the catalysis community. Recent studies have shown that a group of transition metal sulfide catalysts can completely or partially restructure during electrochemical reactions which then exhibit high activity even better than the best commercial standards. However, such restructuring processes and the final structures of the new catalysts are elusive, mainly due to the difficulty from the reaction-induced changes that cannot be captured by ex situ characterizations. To establish the true structure-property relationship in these in situ generated catalysts, we use multimodel operando characterizations including Raman spectroscopy, X-ray absorption spectroscopy, and X-ray reflectivity to investigate the restructuring of a representative catalyst, Co₉S₈, that shows better activity compared to the commercial standard RuO₂ during the oxygen evolution reaction (OER), a key half reaction in water-splitting for hydrogen generation. We find that Co₉S₈ ultimately converts to oxide cluster (CoO _x ) containing six oxygen coordinated Co octahedra as the basic unit which is the true catalytic center to promote high OER activity. The density functional theory calculations verify the in situ generated CoO _x consisting of edge-sharing CoO₆ octahedral clusters as the actual active sites. Our results also provide insights to design other transition-metal-based materials as efficient electrocatalysts that experience a similar restructuring in OER.

Water-Assisted Chemical Route Towards the Oxygen Evolution Reaction at the Hydrated (110) Ruthenium Oxide Surface: Heterogeneous Catalysis via DFT-MD and Metadynamics Simulations

Notwithstanding that RuO2 is a promising catalyst for the oxygen evolution reaction (OER), a plethora of fundamental details on its catalytic properties are still elusive, severely limiting its large-scale deployment. It is also established experimentally that corrosion and wettability of metal oxides can, in fact, enhance the catalytic activity for OER owing to the formation of a hydrated surface layer. However, the mechanistic interplay between surface wettability, interfacial water dynamics and OER across RuO2 , and what degree these processes are correlated are still debated. Herein, spin-polarized Density Functional Theory Molecular Dynamics (DFT-MD) simulations, coupled with advanced enhanced sampling methods in the well-tempered metadynamics framework, are applied to gain a global understanding of RuO2 aqueous interface (explicit water solvent) in catalyzing the OER, and hence possibly help in the design of novel catalysts in the context of photochemical water oxidation. The present study quantitatively assesses the free-energy barriers behind the OER at the (110)-RuO2 catalyst surface revealing plausible pathways composing the reaction network of the O2 evolution. In particular, OER is investigated at room temperature when such a surface is exposed to both gas-phase and liquid-phase water. Albeit a unique efficient pathway has been identified in the gas-phase OER, a surprisingly lowest-free-energy-requiring reaction route is possible when (110)-RuO2 is in contact with explicit liquid water. By estimating the free-energy surfaces associated to these processes, we reveal a noticeable water-assisted OER mechanism which involves a crucial proton-transfer-step assisted by the local water environment. These findings pave the way toward the systematic usage of DFT-MD coupled with metadynamics techniques for the fine assessment of the activity of catalysts, considering finite-temperature and explicit-solvent effects.

A Molecular Tetrahedral Cobalt-Seleno-Based Complex as an Efficient Electrocatalyst for Water Splitting

The cobalt-seleno-based coordination complex, [Co{(SePⁱPr₂)₂N}₂], is reported with respect to its catalytic activity in oxygen evolution and hydrogen evolution reactions (OER and HER, respectively) in alkaline solutions. An overpotential of 320 and 630 mV was required to achieve 10 mA cm^-2 for OER and HER, respectively. The overpotential for OER of this CoSe₄-containing complex is one of the lowest that has been observed until now for molecular cobalt(II) systems, under the reported conditions. In addition, this cobalt-seleno-based complex exhibits a high mass activity (14.15 A g^-1) and a much higher turn-over frequency (TOF) value (0.032 s^-1) at an overpotential of 300 mV. These observations confirm analogous ones already reported in the literature pertaining to the potential of molecular cobalt-seleno systems as efficient OER electrocatalysts.

Climbing with support: scaling the volcano relationship through support–electrocatalyst interactions in electrodeposited RuO2 for the oxygen evolution reaction

The interfacial charge transfer and support-induced electrocatalyst faceting in thin catalysts enable ‘climbing up’ the volcano map for OER electrocatalysts. The conductivity of the support determines the OER activity of thick catalysts.

Bimetallics in a Nutshell: Complexes Supported by Chelating Naphthyridine-Based Ligands

Bimetallic motifs are a structural feature common to some of the most effective and synthetically useful catalysts known, including in the active sites of many metalloenzymes and on the surfaces of industrially relevant heterogeneous materials. However, the complexity of these systems often hampers detailed studies of their fundamental properties. To glean valuable mechanistic insight into how these catalysts function, this research group has prepared a family of dinucleating 1,8-naphthyridine ligands that bind two first-row transition metals in close proximity, originally designed to help mimic the proposed active site of metal oxide surfaces. Of the various bimetallic combinations examined, dicopper(I) is particularly versatile, as neutral bridging ligands adopt a variety of different binding modes depending on the configuration of frontier orbitals available to interact with the Cu centers. Organodicopper complexes are readily accessible, either through the traditional route of salt metathesis or via the activation of tetraarylborate anions through aryl group abstraction by a dicopper(I) unit. The resulting bridging aryl complexes engage in C-H bond activations, notably with terminal alkynes to afford bridging alkynyl species. The μ-hydrocarbyl complexes are surprisingly tolerant of water and elevated temperatures. This stability was leveraged to isolate a species that typically represents a fleeting intermediate in Cu-catalyzed azide-alkyne coupling (CuAAC); reaction of a bridging alkynyl complex with an organic azide afforded the first example of a well-defined, symmetrically bridged dicopper triazolide. This complex was shown to be an intermediate during CuAAC, providing support for a proposed bimetallic mechanism. These platforms are not limited to formally low oxidation states; chemical oxidation of the hydrocarbyl complexes cleanly results in formation of mixed valence Cu^ICu^II complexes with varying degrees of distortion in both the bridging moiety and the dicopper core. Higher oxidation states, e.g., dicopper(II), are easily accessed via oxidation of a dicopper(I) compound with air to give a Cu^II₂(μ-OH)₂ complex. Reduction of this compound with silanes resulted in the unexpected formation of pentametallic copper(I) dihydride clusters or trimetallic monohydride complexes, depending on the nature of the silane. Finally, development of an unsymmetrical naphthyridine ligand with mixed donor side-arms enables selective synthesis of an isostructural series of six heterobimetallic complexes, demonstrating the power of ligand design in the preparation of heterometallic assemblies.

A tetranuclear cobalt(ii) phosphate possessing a D4R core: an efficient water oxidation catalyst

The reaction of Co(OAc)2·4H2O with a sterically hindered phosphate ester, LH2, afforded a tetranuclear complex, [CoII(L)(CH3CN)]4·5CH3CN (1) [LH2 = 2,6-(diphenylmethyl)-4-isopropyl-phenyl phosphate]. The molecular structure of 1 reveals that it is a tetranuclear assembly where the Co(ii) centers are present in the alternate corners of a cube. The four Co(ii) centers are held together by four di-anionic [L]2- ligands. The fourth coordination site on Co(ii) is taken by an acetonitrile ligand. Changing the Co(ii) precursor from Co(OAc)2·4H2O to Co(NO3)2·6H2O afforded a mononuclear complex [CoII(LH)2(CH3CN)2(MeOH)2](MeOH)2 (2). In 2, the Co(ii) centre is surrounded by two monoanionic [LH]- ligands and a pair of methanol and acetonitrile solvents in a six-coordinate arrangement. 1 has been found to be an efficient catalyst for electrochemical water oxidation under highly basic conditions while the mononuclear analogue, 2, does not respond to electrochemical water oxidation. The tetranuclear catalyst has excellent electrochemical stability and longevity, as established by chronoamperometry and >1000 cycle durability tests under highly alkaline conditions. Excellent current densities of 1 and 10 mA cm-2 were achieved with overpotentials of 354 and 452 mV respectively. The turnover frequency of this catalyst was calculated to be 5.23 s-1 with an excellent faradaic efficiency of 97%, indicating the selective oxygen evolution reaction (OER) occurring with the aid of this catalyst. A mechanistic insight into the higher activity of complex 1 towards the OER compared to that of complex 2 is also provided using density functional theory based calculations.

Optimization of the facet structure of cobalt oxide catalysts for enhanced hydrogen evolution reaction

The three different exposed crystal planes of Co₃O₄ catalysts, in which the {112} and {011} planes with abundant Co³⁺ sites exhibited photocatalytic hydrogen evolution activity superior to that of the {001} plane.

Significance of Engineering the Octahedral Units to Promote the Oxygen Evolution Reaction of Spinel Oxides

The clean energy carrier, hydrogen, if efficiently produced by water electrolysis using renewable energy input, would revolutionize the energy landscape. It is the sluggish oxygen evolution reaction (OER) at the anode of water electrolyzer that limits the overall efficiency. The large spinel oxide family is widely studied due to their low cost and promising OER activity. As the distribution of transition metal (TM) cations in octahedral and tetrahedral site is an important variable controlling the electronic structure of spinel oxides, the TM geometric effect on OER is discussed. The dominant role of octahedral sites is found experimentally and explained by computational studies. The redox-active TM locating at octahedral site guarantees an effective interaction with the oxygen at OER conditions. In addition, the adjacent octahedral centers in spinel act cooperatively in promoting the fast OER kinetics. In remarkable contrast, the isolated tetrahedral TM centers in spinel prohibit the OER mediated by dual-metal sites. Furthermore, various spinel oxides preferentially expose octahedral-occupied cations on the surface, making the octahedral cations easily accessible to the reactants. The future perspectives and challenges in advancing fundamental understanding and developing robust spinel catalysts are discussed.

2D Electron Gas and Oxygen Vacancy Induced High Oxygen Evolution Performances for Advanced Co3 O4 /CeO2 Nanohybrids

The rational design of atomic-scale interfaces in multiphase nanohybrids is an alluring and challenging approach to develop advanced electrocatalysts. Herein, through the selection of two different metal oxides with particular intrinsic features, advanced Co₃ O₄ /CeO₂ nanohybrids (NHs) with CeO₂ nanocubes anchored on Co₃ O₄ nanosheets are developed, which show not only high oxygen vacancy concentration but also remarkable 2D electron gas (2DEG) behavior with ≈0.79 ± 0.1 excess e^- /u.c. on the Ce³⁺ sites at the Co₃ O₄ -CeO₂ interface. Such a 2DEG transport channel leads to a high carrier density of 3.8 × 10¹⁴ cm^-2 and good conductivity. Consequently, the Co₃ O₄ /CeO₂ NHs demonstrate dramatically enhanced oxygen evolution reaction (OER) performances with a low overpotential of 270 mV at 10 mA cm^-2 and a high turnover frequency of 0.25 s^-1 when compared to those of pure Co₃ O₄ and CeO₂ counterparts, outperforming commercial IrO₂ and some recently reported representative OER catalysts. These results demonstrate the validity of tailoring the electrocatalytic properties of metal oxides by 2DEG engineering, offering a step forward in the design of advanced hybrid nanostructures.

Photoactive Zn–air batteries using spinel-type cobalt oxide as a bifunctional photocatalyst at the air cathode

Spinel-type cobalt oxide (Co₃O₄) was synthesized and used as a photoactive bifunctional electrocatalyst towards the oxygen evolution reaction (OER) and the oxygen reduction reaction (ORR) at the air cathode of zinc–air batteries (ZABs).

Revealing the thermodynamics of individual catalytic steps based on temperature-dependent single-particle nanocatalysis

Due to the intrinsic heterogeneity of nanocatalysis, many underlying catalytic details on nanocatalysts are hidden in ensemble-averaged measurements.

Atomistic Investigation of Doping Effects on Electrocatalytic Properties of Cobalt Oxides for Water Oxidation

The development of high-performance oxygen evolution reaction (OER) catalysts is crucial to achieve the clean production of hydrogen via water splitting. Recently, Co-based oxides have been intensively investigated as some of the most efficient and cost-effective OER catalysts. In particular, compositional tuning of Co-based oxides via doping or substitution is shown to significantly affect their catalytic activity. Nevertheless, the origin of this enhanced catalytic activity and the reaction mechanism occurring at catalytic active sites remain controversial. Theoretical investigations are performed on the electrocatalytic properties of pristine and transition metal (Fe, Ni, and Mn)-substituted Co oxides using first-principle calculations. A comprehensive evaluation of the doping effects is conducted by considering various oxygen local environments in the crystal structure, which helps elucidate the mechanism behind the doping-induced enhancement of Co-based catalysts. It is demonstrated that the local distortion induced by dopant cations remarkably facilitates the catalysis at a specific site by modulating the hydrogen bonding. In particular, the presence of Jahn-Teller-active Fe(IV) is shown to result in a substantial reduction in the overpotential at the initially inactive catalysis site without compromising the activity of the pristine active sites, supporting previous experimental observations of exceptional OER performance for Fe-containing Co oxides.

Diabatic model for electrochemical hydrogen evolution based on constrained DFT configuration interaction

The accuracy of density functional theory (DFT) based kinetic models for electrocatalysis is diminished by spurious electron delocalization effects, which manifest as uncertainties in the predicted values of reaction and activation energies. In this work, we present a constrained DFT (CDFT) approach to alleviate overdelocalization effects in the Volmer-Heyrovsky mechanism of the hydrogen evolution reaction (HER). This method is applied a posteriori to configurations sampled along a reaction path to correct their relative stabilities. Concretely, the first step of this approach involves describing the reaction in terms of a set of diabatic states that are constructed by imposing suitable density constraints on the system. Refined reaction energy profiles are then recovered by performing a configuration interaction (CDFT-CI) calculation within the basis spanned by the diabatic states. After a careful validation of the proposed method, we examined HER catalysis on open-ended carbon nanotubes and discovered that CDFT-CI increased activation energies and decreased reaction energies relative to DFT predictions. We believe that a similar approach could also be adopted to treat overdelocalization effects in other electrocatalytic proton-coupled electron transfer reactions, e.g., in the oxygen reduction reaction.

Addressing global uncertainty and sensitivity in first-principles based microkinetic models by an adaptive sparse grid approach

In the last decade, first-principles-based microkinetic modeling has been developed into an important tool for a mechanistic understanding of heterogeneous catalysis. A commonly known, but hitherto barely analyzed issue in this kind of modeling is the presence of sizable errors from the use of approximate Density Functional Theory (DFT). We here address the propagation of these errors to the catalytic turnover frequency (TOF) by global sensitivity and uncertainty analysis. Both analyses require the numerical quadrature of high-dimensional integrals. To achieve this efficiently, we utilize and extend an adaptive sparse grid approach and exploit the confinement of the strongly non-linear behavior of the TOF to local regions of the parameter space. We demonstrate the methodology on a model of the oxygen evolution reaction at the Co₃O₄ (110)-A surface, using a maximum entropy error model that imposes nothing but reasonable bounds on the errors. For this setting, the DFT errors lead to an absolute uncertainty of several orders of magnitude in the TOF. We nevertheless find that it is still possible to draw conclusions from such uncertain models about the atomistic aspects controlling the reactivity. A comparison with derivative-based local sensitivity analysis instead reveals that this more established approach provides incomplete information. Since the adaptive sparse grids allow for the evaluation of the integrals with only a modest number of function evaluations, this approach opens the way for a global sensitivity analysis of more complex models, for instance, models based on kinetic Monte Carlo simulations.

Boosting electrochemical water oxidation through replacement of Oh Co sites in cobalt oxide spinel with manganese

The strikingly high catalytic performance and stability of manganese substituted cobalt oxide spinel (Mn_xCo_3-xO₄) over pristine cobalt oxide spinel (Co₃O₄) for the alkaline electrochemical water oxidation is reported. The different role of cations could be uncovered along with the detection of drastic surface-structural changes during the catalysis using spectroscopic and microscopic methods.

In situ cathodic activation of V-incorporated NixSy nanowires for enhanced hydrogen evolution

In situ cathodic activation (ISCA) of V-incorporated Ni_xS_y nanowires supported on nickel foam (VS/Ni_xS_y/NF) can be realized in an alkaline hydrogen evolution reaction (HER) process, which provides not only clearly enhanced activity but also ultrahigh stability for HER. The ISCA process is continuous linear sweep voltammetry (LSV) on VS/Ni_xS_y/NF as a cathodic electrode with gradually enhanced HER activity. The activated VS/Ni_xS_y/NF (A-VS/Ni_xS_y/NF) demonstrates enhanced HER activity with an overpotential of 125 mV to drive 10 mA cm^-2, which is much lower than that of other samples. It may be predicted that the ISCA-derived amorphous VOOH film covering on A-VS/Ni_xS_y/NF accelerates the HER process, and NiOOH may protect active sites from decaying, leading to excellent activity and structural stability. However, for single metal sulfides, the ISCA process of nickel or vanadium sulfides is not available, implying that the synergistic effect between Ni and V of VS/Ni_xS_y/NF may be the key to drive ISCA in alkaline HER. In addition, its ultra-high stability confirms that the stable active sites and nanostructures of A-VS/Ni_xS_y/NF are derived from ISCA. Therefore, the ISCA of V-incorporated transition metal sulfides in the alkaline HER process may be a facile and promising method to obtain efficient electrocatalysts.