A Suite of Tetraphenylethylene-Based Discrete Organoplatinum(II) Metallacycles: Controllable Structure and Stoichiometry, Aggregation-Induced Emission, and Nitroaromatics Sensing

Aggregation-induced emission enhancement (AIEE) active bispyrene-based fluorescent probe: "turn-off" fluorescence for the detection of nitroaromatics

The detection of nitroaromatic explosives in real samples is essential for environmental monitoring because of their strongly powerful nature and wide applications in industries. Aggregation-induced emission enhancement (AIEE) active fluorescent probe has been widely employed to detect nitroaromatic explosives. Hereby, a simple V-shaped bispyrene-based fluorescent probe (called py-o) with AIEE properties was designed and synthesized, which was fully charactered by 1D NMR, ESI, FTIR, and 2D NOESY spectra. The py-o displayed bright blue-green fluorescence excimer emission at 480 nm in DMF/H2O (v/v 1:1). It is observed that the fluorescence excimer emission of py-o at 480 nm was quenched by PA in solution with a quenching constant of 5.45 × 104 M-1, and the limit of detection was approximately 0.139 μM. The details of the sensing mechanism were explained using 1H NMR titrations, Job's plot and Bensi-Hildebrand methods, which revealed a 1:1 binding ratio via the π-π interactions between PA and py-o. Meanwhile, it exhibited outstanding anti-interference ability in the detection of PA when interfering analytes were added under the same conditions. Furthermore, low-cost thin-layer chromatography (TLC) plates coated with py-o were developed as fluorescent tools for naked-eye detection of PA in the solid state. Therefore, this work provides a new method for constructing an AIEE fluorescent probe for the detection of nitroaromatic explosives to utilize in environmental monitoring.

An investigation of the Excitation Wavelength-Dependent Dynamic Changes in the Mechanism of Detection of Picric Acid using Pyrene-Based Donor-Acceptor Systems

Picric acid (PA) is an important industrial feedstock and hence the release of industrial effluents without proper remediation results in its buildup in soil and water bodies. The adverse effects of PA accumulation in living beings necessitate the development of efficient methods for its detection and quantification. Herein, we describe pyrene-based fluorescent sensors for PA, where pyrene is appended with electron-withdrawing groups, malononitrile, and 2-(3-cyano-4,5,5-trimethylfuran-2(5H)-ylidene) malononitrile (DCDHF). These molecules displayed the typical emission of pyrene monomers, as well as a broad red-shifted emission resulting from an intramolecular charge transfer (ICT) in the excited state. Both the emissions displayed a turn-off response to PA with high selectivity and sensitivity and the lowest limit of detection was estimated as 27 nM. To prove the feasibility of on-site detection, test paper strips were prepared, which could detect PA up to 4.58 picograms. Using a combination of experimental and theoretical studies the mechanism of the detection was identified as primary/secondary inner filter effect, oxidative photoinduced electron transfer, or a combination of both depending on the excitation wavelength. Interestingly, the contribution of each of these mechanisms to the total quenching process varied with a change in the excitation wavelength.

2H-Pyran-2-one-Functionalized Diketopyrrolopyrrole Dye: Design, Synthesis, and Explosives Sensor

In this work, a 2H-pyran-2-one-functionalized diketopyrrolopyrrole (DPP) (coded as receptor 1) was designed, synthesized, and fully characterized by various spectroscopic methods. The physical properties of molecular architecture 1 were studied employing theoretical calculations. Receptor 1 was elegantly scrutinized for the sensing of explosive nitroaromatic compounds (NACs). Receptor 1 exhibited detection of nitro explosives, i.e., picric acid (PA), 2,4-dinitrophenol (DNP), and nitrophenol (NP), via the fluorescence quenching mechanism. The Stern-Volmer equation was employed to evaluate the effectiveness of the quenching process. It was found that 1 exhibited a detection limit of about 7.58 × 10-5, 8.35 × 10-5, and 9.05 × 10-5 M toward PA, DNP, and NP, respectively. The influence of interfering metal ions and anions on PA detection was investigated thoroughly. Furthermore, receptor 1-based low-cost fluorescent thin-layer chromatography (TLC) plates were developed for the recognition of PA.

Pt(II) Tetrafacial Barrel with Aggregation-Induced Emission for Sensing

A new tetraphenylpyrazine-based tetraimidazole ligand (L) was synthesized and used for subcomponent self-assembly with cis-(tmeda)Pd(NO3)2 and cis-Pt(PEt3)2(OTf)2, leading to the formation of two tetrafacial barrels [Pd8L4(tmeda)8](NO3)16 (1) and [Pt8L4(PEt3)16](OTf)16 (2), respectively. Although ligand L is aggregation-induced emission (AIE) active, barrel 2 showed a magnificently higher AIE activity than ligand L, while 1 failed to retain the AIE properties of the ligand. Pd(II) barrel 1, undergoing an aggregation-caused quenching (ACQ) phenomenon, nullified the AIE activity of the ligand to be used in the photophysical application. The enhanced emission in the aggregated state of Pt(II) barrel 2 was used for the recognition of picric acid (PA), which is explosive in nature and one of the groundwater contaminants in landmine areas. The recognition of picric acid was found to be selective in comparison with that of other nitroaromatic compounds (NACs), which could be attributed to ground-state complex formation and resonance energy transfer between picric acid and barrel 2. The use of new AIE-active assembly 2 for selective detection of PA with a low detection limit is noteworthy.

Self-Assembly of an [M8 L24 ]16+ Intertwined Cube and a Giant [M12 L16 ]24+ Orthobicupola

Through coordination-driven self-assembly, aesthetically captivating structures can be formed by tuning the length or flexibility of various components. The self-assembly of an elongated rigid terphenyl-based tetra-pyridyl ligand (L1) with a cis-Pd(II) acceptor produces an [M12 L16 ]24+ triangular orthobicupola structure (1). When flexibility is introduced into the ligand by the incorporation of a -CH2 - group between the dipyridylamine and terphenyl rings in the ligand (L2), anunique [M8 L24 ]16+ water-soluble 'intertwined cubic structure' (2) results. The inherent flexibility of ligand L2 might be the key factor behind the formation of the thermodynamically stable and 'intertwined cubic structure' in this scenario. This research showcases the ability to design and fabricate novel, topologically distinctive molecular structures by a straightforward and efficient approach.

Three-step cascaded artificial light-harvesting systems with tunable efficiency based on metallacycles

It is still challenging to develop multi-step cascaded artificial light-harvesting systems (ALHSs) with tunable efficiency. Here, we designed novel cascaded ALHSs with AIE-active metallacycles as the light-harvesting antenna, Eosin Y (ESY) and sulforhodamine 101 (SR101) as conveyors, near-infrared emissive chlorin-e6 (Ce6) as the final acceptor. The close contact and fair spectral overlap between donor and acceptor molecules at each level ensured the efficient sequential three-step energy transfer. The excited energy was sequentially and efficiently funneled to Ce6 along the cascaded line MTPEPt1 → ESY → SR101 → Ce6. Additionally, a unique strategy for regulating the efficiency of ALHS was illustrated by adjusting hydrophilic and hydrophobic interactions.

Emissive Click Cages

This study reports the synthesis of cofacial organic cage molecules containing aggregation-induced emissive (AIE) luminogens (AIEgens) through four-fold Cu(I)-catalyzed azide-alkyne cycloaddition (CuAAC) "click" reactions. The shorter AIEgen, tetraphenylethylene (TPE), afforded two orientational isomers (TPE-CC-1A and TPE-CC-1B). The longer AIEgen, tetrabiphenylethylene (TBPE), afforded a single isomer (TBPE-CC-2). The click reaction employed is irreversible, yet it yielded remarkable four-fold click products above 40 %. The phenyl rings around the ethylene core generate propeller-shaped chirality owing to their orientation, which influences the chirality of the resulting cages. The shorter cages are a mixture of PP/MM isomers, while the longer ones are a mixture of PM/MP isomers, as evidenced by their x-ray structures. The newly synthesized cage molecules are emissive even in dilute solutions (THF) and exhibit enhanced AIE upon the addition of water. The aggregated cage molecules in aqueous solution exhibit turn-off emission sensing of nitroaromatic explosives, with selectivity to picric acid in the 25-38 nanomolar detection range.

Chiral SPINOL-Based Pt(II) Metallacycles For Immunogenic Cell Death

The incorporation of chirality endows Pt(II)-based metal-organic complexes (MOCs) with unique potentials in several fields such as nonlinear optics and chiral catalysis. However, the exploration of chiral Pt(II) metallacycles in biological responses remains underdeveloped. Herein, we designed and synthesized two chiral Pt(II) metallacycles 1 and 2 via the coordination-driven self-assembly of chiral 1,1'-spirobiindane-7,7'-diol (SPINOL)-derived ligands and cis-Pt(PEt3)2(OTf)2 (90°Pt). Their structures were well characterized by 1H NMR, 31P{1H} NMR, ESI-TOF-MS, and X-ray crystallography, and their photophysical properties were investigated by UV-vis absorption, fluorescence, and circular dichroism (CD) spectroscopies. Then, the antitumor activity of the two chiral metallacycles in vitro was further tested. Complexes 1 and 2 exhibited strong cytotoxicity, especially toward the A549 cells. The destruction of the mitochondrial function, the inhibition of the glutathione (GSH)/glutathione disulfide (GSSG) level, and the inactivation of superoxide dismutase (SOD) induced by complexes 1 and 2 led to the massive accumulation of reactive oxygen species (ROS). The overloaded ROS then triggered apoptotic cell death, and the release of damage-associated molecular patterns (DAMPs) further induced immunogenic cell death (ICD). To the best of our knowledge, this is the first example of Pt(II)-based metallacycles that can induce immunogenic cell death, providing a new strategy for the future design and construction of immune-modulating platinum agents in cancer therapy.

Water-Soluble Pd6L3 Molecular Bowl for Separation of Phenanthrene from a Mixture of Isomeric Aromatic Hydrocarbons

Phenanthrene is a high-value raw material in chemical industries. Separation of phenanthrene from isomeric anthracene continues to be a big challenge in the industry due to their very similar physical properties. Herein, we report the self-assembly of a water-soluble molecular bowl (TB) from a phenothiazine-based unsymmetrical terapyridyl ligand (L) and a cis-blocked 90° Pd(II) acceptor. TB featured an unusual bowl-like topology, with a wide rim diameter and a hydrophobic inner cavity fenced by the aromatic rings of the ligand. The above-mentioned features of TB allow it to bind polyaromatic hydrocarbons in its confined cavity. TB shows a higher affinity for phenanthrene over its isomer anthracene in water, which enables it to separate phenanthrene with ∼93% purity from an equimolar mixture of phenanthrene and anthracene. TB is also able to extract pyrene with around ∼90% purity from an equimolar mixture of coronene, perylene, and pyrene. Moreover, TB can be reused for several cycles without significant degradation in its performance as an extracting agent. This clean strategy of separation of phenanthrene and pyrene from a mixture of hydrophobic hydrocarbons by aqueous extraction is noteworthy.

Construction of 1,3,5-Triazine-Based Prisms and Their Enhanced Solid-State Emissions

In this study, two trigonal prisms based on the 1,3,5-triazine motif (SA and SB), distinguished by hydrophobic groups, were prepared by the self-assembly of tritopic terpyridine ligands and Zn(II) ions. SA and SB exhibited high luminescence efficiencies in the solid state, overcoming the fluorescence quenching of the 1,3,5-triazine group caused by π-π interactions. Notably, SA and SB exhibited different luminescence behaviors in the solution state and aggregation state. SB with 12 alkyl chains exhibited extremely weak fluorescence in a dilute solution, but its fluorescence intensity and photoluminescence quantum yield (PLQY) were significantly enhanced in the aggregated state (with the increase in the water fraction), especially in the solid state. Different from the gradually enhanced efficiency of SB, the PLQY of SA gradually decreased with the increase in aggregation but still maintained a high luminescence efficiency. These two complexes exhibited different modes to solve the fluorescence quenching of 1,3,5-triazine in the solid state. The hierarchical self-assembly of SB exhibited nanorods owing to the hydrophobic interactions of alky chains, while SA aggregated into spheres under the influence of π-π interactions.

Self-Assembled Encapsulation of CuX2- (X = Br, Cl) in a Gold Phosphine Box-like Cavity with Metallophilic Au-Cu Interactions

Synthetic routes to the crystallization of two new box-like complexes, [Au6(Triphos)4(CuBr2)](OTf)5·(CH2Cl2)3·(CH3OH)3·(H2O)4 (1) and [Au6(Triphos)4 (CuCl2)](PF6)5·(CH2Cl2)4 (2) (triphos = bis(2-diphenylphosphinoethyl)phenylphosphine), have been developed. The two centrosymmetric cationic complexes have been structurally characterized through single-crystal X-ray diffraction and shown to contain a CuX2- (X = Br or Cl) unit suspended between two Au(I) centers without the involvement of bridging ligands. These colorless crystals display green luminescence (λem = 527 nm) for (1) and teal luminescence (λem = 464 nm) for (2). Computational results document the metallophilic interactions that are involved in positioning the Cu(I) center between the two Au(I) ions and in the luminescence.

Aggregation-induced emission enhancement (AIEE) of tetrarhenium(I) metallacycles and their application as luminescent sensors for nitroaromatics and antibiotics

The self-assembly of tetrarhenium metallacycles [{Re(CO)₃}₂(μ-dhaq)(μ-N-N)]₂ (3a, N-N = 1,3-bis(1-butylbenzimidazol-2-yl)benzene; 3b, N-N = 1,3-bis(1-octylbenzimidazol-2-yl)benzene), (H₂-dhaq = 1,4-dihydroxy-9,10-anthraquinone) and [{Re(CO)₃}₂(μ-thaq)(μ-N-N)]₂ (4, N-N = 1,3-bis(1-butylbenzimidazol-2-yl)benzene), (H₂-thaq = 1,2,4-trihydroxy-9,10-anthraquinone) under solvothermal conditions is described. The metallacycles 3a,b and 4 underwent aggregation-induced emission enhancement (AIEE) in THF upon the incremental addition of water. TEM images revealed that metallacycle 3a in a 60% aqueous THF solution formed rectangular aggregates with a wide size distribution, while a 90% aqueous THF solution resulted in the formation of a mixture of nanorods and amorphous aggregates due to rapid and abrupt aggregation. UV-vis and emission spectral profiles supported the formation of nanoaggregates of metallacycles 3a,b and 4 upon the gradual addition of water to a THF solution containing metallacycles. Further studies indicated that these nanoaggregates were excellent probes for the sensitive and selective detection of nitro group containing picric acid (PA) derivatives as well as antibiotics.

Aggregation-Induced Emission Metallocuboctahedra for White Light Devices

Materials for organic light-emitting devices which exhibit superior emission properties in both the solution and solid states with a high fluorescence quantum yield have been extensively sought after. Herein, two metallocages, S1 and S2, were constructed, and both showed typical aggregation-induced emission (AIE) features with intense yellow fluorescence. By adding blue-emissive 9,10-dimethylanthracene, pure white light emission can be produced in the solution of S1 and S2. Furthermore, due to the remarkable AIE feature and good fluorescence quantum yield in the solid state, metallocages are highly emissive in the solid state and can be utilized to coat blue LED bulbs or integrate with blue-emitting chips to obtain white light. This study advances the usage of metallocages as practical solid-state fluorescent materials and provides a fresh perspective on highly emissive AIE materials.

Construction of metallo-triangles with cis-TPE motifs and fluorescence properties

Two metallo-triangles, SA and SB, with cis-TPE motifs were constructed, and their fluorescence properties were explored. Compared with the dilute solution, both triangles SA and SB exhibited significant AIE behavior in the aggregated states. Moreover, the shorter version SA showed higher quantum yields than SB in the aggregated states.

Anion-Coordination-Driven Assembly: From Discrete Supramolecular Self-Assemblies to Functional Soft Materials

Anion templated assembly of supramolecular systems has been extensively explored in previous reports, whereas anions serve only as an auxiliary and spectator role. With the development of anion coordination chemistry in recent years, anion coordination-driven assembly (ACDA) has emerged as a new strategy for the construction of supramolecular self-assemblies. Anions are proved to exist as the main actors in the construction of supramolecular architectures, i. e., serve as the coordination center. This Review will focus on the recent progress in anion-coordination-driven assembly of discrete supramolecular architectures, such as helicates, polyhedrons and polygons, and the various applications of 'aniono'-systems. At the end of this Review, we highlight current challenges and opportunities for future research of anion-coordination-driven self-assembly.

AIE-Active, Stimuli-Responsive Fluorescent 2D Block Copolymer Nanoplatelets Based on Corona Chain Compression

Aggregation-induced emission (AIE) represents a powerful tool in nanoscience as a result of enhanced luminescence in the condensed state. Although AIEgenic materials have been utilized in a wide range of applications, well-defined self-assembled nanoparticles with tailorable and uniform dimensions and morphology remain challenging to access. Herein, we use the seeded growth, living crystallization-driven self-assembly (CDSA) method to prepare size-tunable and uniform AIE-active 2D nanoplatelets from amphiphilic block copolymer (BCP) precursors with a crystallizable core-forming block and a corona-forming block to which tetraphenylethene (TPE) groups were covalently grafted as AIE-active pendants. The nanoplatelets were formed as a result of a solvophobicity-induced 1D to 2D morphology preference change, which accompanied the seeded growth of a BCP with a quaternized corona-forming block bearing the TPE luminogen. The 2D nanoplatelets exhibited a solvent-responsive fluorescent emission, and examples with coronas containing homogeneously distributed AIE-active TPE groups and Hg(II)-capturing thymine units exhibited excellent performance as proof-of-concept "turn-on" sensors for Hg(II) detection with a rapid response, high selectivity, and a low detection limit (5-125 × 10^-9 M, i.e., 1-25 ppb). The fluorescence intensity was found to be nonlinear with respect to analyte concentration and to increase with the area of the nanoplatelet. This behavior is consistent with a cooperative mechanism based on changes in the steric compression of the corona chains, which gives rise to a restriction of the intramolecular motion (RIM) effect.

Fluorescent porous organic polymers for detection and adsorption of nitroaromatic compounds

A fluorescent porous organic polymer (FPOP) with strong fluorescence and tunable emission colors, was synthesized through a simple cost-effective method via Scholl coupling reaction. Experiments proved the stability and excellent detection and adsorption ability, and microporous nature of the material. Luminescence of FPOP was quenched when addition of nitroaromatic compounds. The properties along with large-scale and low-cost preparation make these FPOP potential candidates for fluorescence detection of nitroaromatic compounds. Additionally, FPOP shows higher adsorption capacity and rate than other reported adsorbents, and has the possibility of being an effective adsorbent for industrial usage. Moreover, a fluorescent test paper was further developed and is found to be sensitive to 10^-8 M level, complete with a rapid response time and visual detection. This newly developed strategy may open up an avenue for exploring porous polymers, particularly those with a strong fluorescence, for the large-scale fabrication of FPOP for various advanced applications.

Binding of Dual-Function Hybridized MetalOrganic Capsules to Enzymes for Cascade Catalysis

The combination of chemo- and biocatalysis for multistep syntheses provides attractive advantages in terms of evolvability, promiscuity, and sustainability striving for desirable catalytic performance. Through the encapsulation of flavin analogues by both NADH and heme mimics codecorated heteroleptic metal-organic capsules, herein, we report a progressive host-guest strategy to imitate cytochrome P450s catalysis for cascade oxidative coupling catalysis. Besides the construction of stable dual-function metal-organic capsules and the modification of cofactor-decorated capsules at the domain of enzymes, this supramolecular strategy involves multistage directional electron flow, affording reactive ferric peroxide species for inducing oxygenation. Under light irradiation, the metal-organic capsule selectively converts stilbene to oxidative coupling products (including 2-oxo-1,2-diphenylethyl formate, 2-alkoxy-1,2-diphenylethanone) in tandem with enzymatic reactions respectively, at the domain of natural enzymes. The ingenious combination of capsules and enzymes with the in situ-regenerated capsule-loaded NADH cofactor promises non-native coupling reactions by forming regional cooperation and division. This abiotic-biotic conjugated host-guest strategy is conducive to the de novo creation of multifunctional components approaching active enzymatic sites for reinforced matter and energy transporting, demonstrating a key role of multicomponent supramolecular catalysts for one-pot integrated catalytic conversions.

Fluorescent cyclophanes and their applications

With the serendipitous discovery of crown ethers by Pedersen more than half a century ago and the subsequent introduction of host-guest chemistry and supramolecular chemistry by Cram and Lehn, respectively, followed by the design and synthesis of wholly synthetic cyclophanes-in particular, fluorescent cyclophanes, having rich structural characteristics and functions-have been the focus of considerable research activity during the past few decades. Cyclophanes with remarkable emissive properties have been investigated continuously over the years and employed in numerous applications across the field of science and technology. In this Review, we feature the recent developments in the chemistry of fluorescent cyclophanes, along with their design and synthesis. Their host-guest chemistry and applications related to their structure and properties are highlighted.

Emissive Platinum(II) Macrocycles as Tunable Cascade Energy Transfer Scaffolds

Developing artificial light-harvesting scaffolds with a cascade energy transfer process is significant for better understanding of photosynthesis. Here, we report [3+3] self-assembled Pt^II fluorescent macrocycles (3 a and 3 b) as light-harvesting platforms with cascade energy transfer. The Pt^II macrocycles aggregate into nanospheres and show emission-enhancement characteristics upon increasing water content in acetone medium. These aggregates (3a^a and 3b^a ) serve as energy donors when mixed with the hydrophobic dye Eosin-Y (ESY). In the presence of a second dye, Nile Red (NiR), an unusual sequential two-step energy transfer takes place from the macrocycles to NiR. In this case, ESY acts as a bridge in the relay mode. Additionally, a unique strategy to control such an energy transfer process by tuning the chain length of the alkyl group attached to the periphery of the macrocycles is demonstrated.

An Adaptable Water-Soluble Molecular Boat for Selective Separation of Phenanthrene from Isomeric Anthracene

Anthracene crude oil is a common source of phenanthrene for its industrial use. The isolation of phenanthrene from this source is a challenging task due to very similar physical properties to its isomer anthracene. We report here a water-soluble Pd(II) molecular boat (MB1) with unusual structural topology that was obtained by assembling a flexible tetrapyridyl donor (L) with a cis-Pd(II) acceptor. The flexible backbone of the boat enabled it to breathe in the presence of a guest optimizing the fit within the cavity. The boat binds phenanthrene more strongly than anthracene, which enabled separation of phenanthrene with an >98% purity from an equimolar mixture of the two isomers using MB1 as an extracting agent. MB1 represents a unique example of a coordination receptor suitable for selective aqueous extraction of phenanthrene from anthracene with reusability of several cycles.

Constructing Supramolecular Frameworks Based Imidazolate-Edge-Bridged Metallacalix[3]arenes via Hierarchical Self-Assemblies

Hierarchical self-assembly of novel supramolecular structures has obtained increasing attention. Herein we design and synthesize the palladium(II)-based molecular basket-like structures, as structural analog of metallacalix[3]arene [M3L3]3+ (M = (dmbpy)Pd, (phen)Pd; dmbpy = 4,4’-dimethyl-bipyridine; phen = 1,10-phenanthroline), by coordination-driven self-assembly from imidazolate-containing ligand [4,5-bis(2,5-dimethylthiophen-3-yl)-1H-imidazole (HL) with palladium(II) nitrate precursors (dmbpy)Pd(NO3)2 and (phen)Pd(NO3)2. The difference of the palladium(II) nitrate precursors with π-surface in complex produces variations of the two-dimensional (2-D) and three-dimensional (3-D) high-ordered supramolecular architectures, constructed by π···π packing and hydrogen bonding interactions, with metallacalixarenes as building blocks. These results provide perceptions of further exploring the hierarchical assembly of supramolecular structures based on π···π packing and multiple hydrogen bonding.

Dual-AIEgens in one organoplatinum(II) metallaprism: photoluminescence exploration

Two sets of cis-trans isostructural metallaprisms were constructed from the controlling linkage of a Pt-corner, and a linear and quadrilateral AIE ligand. The combination of two AIEgens of TPE and the Pt-corner into one system endows these isomers with interesting AIE functions.

Selective separation of planar and non-planar hydrocarbons using an aqueous Pd6 interlocked cage

Polycyclic aromatic hydrocarbons (PAHs) find multiple applications ranging from fabric dyes to optoelectronic materials. Hydrogenation of PAHs is often employed for their purification or derivatization. However, separation of PAHs from their hydrogenated analogues is challenging because of their similar physical properties. An example of such is the separation of 9,10-dihydroanthracene from phenanthrene/anthracene which requires fractional distillation at high temperature (∼340 °C) to obtain pure anthracene/phenanthrene in coal industry. Herein we demonstrate a new approach for this separation at room temperature using a water-soluble interlocked cage (1) as extracting agent by host–guest chemistry. The cage was obtained by self-assembly of a triimidazole donor L·HNO₃ with cis-[(tmeda)Pd(NO₃)₂] (M) [tmeda = N,N,N′,N′-tetramethylethane-1,2-diamine]. 1 has a triply interlocked structure with an inner cavity capable of selectively binding planar aromatic guests.

We report here a triply interlocked cage with the ability to encapsulate planar guests in aqueous medium. This property was then employed to efficiently separate planar and non-planar aromatic hydrocarbons by aqueous extraction.

Iridium tetrazolato complexes as efficient protein staining agents

Iridium tetrazolato complexes have been illustrated as one kind of efficient protein staining agent.

Isomerization-Induced Excimer Formation of Pyrene-Based Acylhydrazone Controlled by Light- and Solvent-Sensing Aromatic Analytes

Pyrene is a fluorescent polycyclic aromatic hydrocarbon, and it would be interesting to determine whether its C═N-based conjugate can be used for sensing of aromatic analytes at its supramolecular aggregated state. For this purpose, we have synthesized (E)-3,4,5-tris(dodecyloxy)-N'-(pyren-1-ylmethylene)benzohydrazide (Py@B) by alkylation, substitution, and the Schiff base reaction methodology. The E-isomer of Py@B (E-Py@B) exhibits a bright fluorescence due to excimer formation in nonaromatic solvents. Upon photoirradiation with λ = 254 nm, it exhibits E-Z isomerization across the C═N bond at a low concentration (10^-4 M), resulting in a quenched fluorescence intensity, and interestingly, upon photoirradiation with λ = 365 nm, the Z-isomer of Py@B returns to the E-isomer again, indicating that E-Z isomerization of Py@B is reversible in nature. The thick supramolecular aggregated morphology of E-Py@B changes to a flowery needlelike morphology after photoirradiation with λ = 254 nm. The UV-vis absorption band at 370 nm for 10^-4 M Py@B in methyl cyclohexane (MCH) is due to excimer formation for closer proximity of pyrene moieties present in E-Py@B and changes to the absorption peak at 344 nm for its Z-isomer formation. The fluorescence spectroscopy results also support the fact that the optimum concentration of the E-isomer of Py@B is 2 × 10^-4 M in MCH for excimer formation. From spectral results, it may be concluded that nonaromatic solvents assist in constructing the excimer, but aromatic solvents resist forming an excimer complex of E-Py@B. The fluorescent emission of E-Py@B in MCH is quickly quenched on addition of different aromatic analytes through both static and dynamic pathways. In the solid state, E-Py@B also senses aromatic vapors efficiently via fluorescence quenching. Absorbance spectra of a model molecule obtained using time-dependent density functional theory (TDDFT) calculations on a DFT-optimized structure indicate complex adduct formation between E-Py@B and aromatic analytes from the well-matched theoretical and experimental UV-vis spectra on addition of different analytes with E-Py@B.

Study of a phosphorescent cationic iridium(III) complex displaying a blue-shift in crystals

We report the synthesis and the characterization of a new cationic iridium(III) complex featuring two 1-(p-methoxyphenyl)-5-methoxybenzimidazole cyclometallating ligands and a dimethylbipyridine ancillary ligand. The complex has been fully characterized by 1D and 2D NMR (¹H, ¹³C, ¹⁹F and ³¹P), elemental analysis and high-resolution mass spectrometry (HRMS). The photoluminescence studies performed in a solution, on amorphous powder and on crystals revealed an unexpected behavior. Indeed, the emission spectra observed in both solution (CH₂Cl₂) and amorphous powder samples are centered at around 580 nm, whereas in crystals the emission displays a large hypsochromic shift of ∼800 cm^-1 (λ_em = 558 nm). X-ray diffraction experiments, photophysical studies and DFT calculations allow for rationalizing the hypsochromic shift.

Synergistic combination of ACQ and AIE moieties to enhance the emission of hexagonal metallacycles

Herein, we show the synergistic combination of aggregation-caused quenching (ACQ) and aggregation-induced emission (AIE) units into two hexagonal metallacycles. The resultant metallacycles displayed emergent photophysical properties including tunable fluorescence using the polarity and solubility of the solvents as well as enhanced emissive efficacy. Our work demonstrates the synergistic enhancement of these two orthogonal effects via coordination-driven self-assembly.

Supramolecular Assembly with Aggregation-Induced Emission Property for Sensing and Detection

The fabrication of new supramolecular materials for real-time detection of analytes including ions, organic pollutants, gases, biomolecules, and drugs is of pivotal importance in industrial manufacture, clinical treatment, and environmental remediation. Incorporating fluorescent molecules with distinct aggregation-induced emission (AIE) effects into supramolecular assemblies has received much attention over the past two decades, owing to the remarkable performance of the AIE-active supramolecular materials in sensing and detection. In this minireview, we summarize the recent progress of superior detection systems on the basis of supramolecular assemblies accompanied with AIE features. We envision that this minireview will be helpful and timely for relevant researchers to stimulate new thinking for constructing new AIE-based supramolecular materials with advanced architectures for effective sensing and detection.

AIE-MOF materials for biological applications

Metal-Organic Frameworks (MOFs), coming under the realm of coordination chemistry, are unparalleled and the most studied among the group of porous materials. Structurally, these are well-defined three-dimensional crystalline products that can be tuned for various potential applications with a range of physico-chemical properties. More recently, aggregation-induced emission (AIE) and AIE of MOF material has attracted tremendous attention due to promising applications in biology. However, a chapter summarizing the work in AIE-MOFs materials has never been reported till date. A comprehensive review on the AIE and MOFs separately is beyond the reach of this chapter. Hence, we have summarized overview of recent developments in the syntheses and biological applications such as cell imaging, heparin detection, and drug delivery. In the end, conclusion, prospects and challenges in the arena of AIE-MOF materials are also highlighted.

Construction of Entropically Favored Supramolecular Metal-Ligand Trimeric Assemblies Supported by Flexible Pyridylaminophosphorus(V) Scaffolds

The self-assembly reactions of tetratopic metal acceptors with the flexible bidentate ligands are known to yield self-assembled molecular squares of the type [M₄L₈], triangles of composition [M₃L₆], or a mixture of these two. In this work, we demonstrate the preferential formation of a trimeric cage assembly of the formula [Pd₃(L¹)₆·(BF₄)₆] (1a) over the tetrameric cage [Pd₄(L¹)₈·(BF₄)₈] (1b) by employing a flexible dipodal phosphoramide ligand, [PhPO(NH(3-Py))₂] (L¹; 3-Py = 3-aminopyridine), in a reaction with [Pd(CH₃CN)₄·(BF₄)₂]. The entropically favored trimeric self-assembly of 1a is the predominant species in the solution [dimethyl sulfoxide (DMSO)-d₆] at room temperature. In fact, at higher temperatures, 1a was found to be the only product, as observed from the disappearance of the peak due to 1b in the ³¹P NMR spectrum. However, in a 1:1 mixture of acetonitrile (MeCN)-d₃ and DMSO-d₆, the tetrameric species 1b is the preferred species, as revealed by the ³¹P NMR and electrospray ionization mass spectral analyses. The structure of the molecular trimer 1a has been established in the solid state by using single-crystal X-ray diffraction analysis. Interestingly, treatment of an another flexible ligand, [MePO(NH(3-Py))₂] (L²), with the same Pd(II) acceptor resulted in exclusive formation of the trimeric cage [Pd₃(L²)₆·(BF₄)₆] (2).

Bis(β-diketone)-based metallacycles with haloalkane-induced fluorescence enhancement

A series of metallarectangles 1-5 were synthesized by the selective combination of (p-cymene)Ru-corner, bis(β-diketone) arms and bifunctional pyridyl linkers. They exhibited a very rare phenomenon of haloalkane-induced fluorescence enhancement.

Drum-like Metallacages with Size-Dependent Fluorescence: Exploring the Photophysics of Tetraphenylethylene under Locked Conformations

Materials with aggregation-induced emission (AIE) properties are of growing interest due to their widespread applications. AIEgens, such as tetraphenylethylene units, display varying emission behaviors during their conformational changes. However, the structure-property relationships of the intermediate conformations have rarely been explored. Herein, we show that the conformational restriction on TPE units can affect the structural relaxation in the excited state and the resulting photophysical behaviors. Specifically, three metallacages of different sizes were prepared via the coordination-driven self-assembly of a TPE-based tetrapyridyl donor with length-increasing Pt(II) acceptors. While the metallacages share similar scaffolds, they exhibit a trend of red-shifted fluorescence and attenuated quantum yield with the increase of their sizes. Furthermore, spectroscopic and computational studies together with a control experiment were conducted, revealing that the degree of cage tension imposed on the excited-state conformational relaxation of TPE moieties resulted in their distinct photophysical properties. The precise control of conformation holds promise as a strategy for understanding the AIE mechanism as well as optimizing the photophysical behaviors of materials on the platform of supramolecular coordination complexes.

Supramolecular Coordination Cages Based on N-Heterocyclic Carbene-Gold(I) Ligands and Their Precursors: Self-Assembly, Structural Transformation and Guest-Binding Properties

The incorporation of functional groups into the cavity of discrete supramolecular coordination cages (SCCs) will bring unique functions and applications. Here, three dicarboxylate ligands (H₂ L1Cl, H₂ L2Cl and H₂ L3Cl) containing N-heterocyclic carbene (NHC) precursors as linkers were introduced to construct SCCs by combining with two C₃ -symmertic (CpZr)₃ (μ₃ -O)(μ₂ -OH)₃ clusters as three-connect vertices, resulted in a series of rugby-like V₂ E₃ (V=vertex, E=edge) type homoleptic cages (SCC-1, SCC-2 and SCC-3). However, V₄ E₆ -type tetrahedral cages (SCC-4 and SCC-5), incorporating six Au-NHC moieties, were obtained when the corresponding NHC-gold(I) functionalized ligands (H₂ L1^Au , H₂ L2^Au ) were applied. For the first time, we present a trackable CpZr-involved cage to cage conversion to generate a heteroleptic V₂ E₃ cage (SCC-6) from two homoleptic cages (SCC-2 and SCC-5) with different geometries of V₂ E₃ and V₄ E₆ . The heteroleptic assembly SCC-6 can also be formed upon a subcomponent displacement strategy. The structural transformation and reassembly processes were detected and monitored by ¹ H NMR spectroscopy and electrospray-ionization mass spectrometry. The formation of heteroleptic assembly was further supported by single crystal X-ray diffraction analysis. Moreover, homoleptic cage SCC-2 possesses a trigonal bipyramidal cationic cavity allowing the encapsulation of a series of sulfonate anionic guests.

A Self-Assembled Palladium(II) Barrel for Binding of Fullerenes and Photosensitization Ability of the Fullerene-Encapsulated Barrel

Fullerene extracts obtained from fullerene soot lack their real application due to their poor solubility in common solvents and difficulty in purification. Encapsulation of these extracts in a suitable host is an important approach to address these issues. We present a new Pd₆ barrel (1), which is composed of three 1,4-dihydropyrrolo[3,2-b]pyrrole panels, clipped through six cis-Pd^II acceptors. Large open windows and cavity make it an efficient host for a large guest. Favorable interactions between the ligand and fullerene (C₆₀ and C₇₀ ) allows the barrel to encapsulate fullerene efficiently. Thorough investigation reveals that barrel 1 has a stronger binding affinity towards C₇₀ over C₆₀ , resulting in the predominant extraction of C₇₀ from a mixture of the two. Finally, the fullerene encapsulated barrels C₆₀ ⊂1 and C₇₀ ⊂1 were found to be efficient for visible-light-induced singlet oxygen generation. Such preferential binding of C₇₀ and photosensitizing ability of C₆₀ ⊂1 and C₇₀ ⊂1 are noteworthy.

A Feasible Strategy of Fabricating Type I Photosensitizer for Photodynamic Therapy in Cancer Cells and Pathogens

The utilization of photochemical reaction channel based on radical process is rarely reported, which might be a very efficient and feasible strategy for improving generation of Type I reactive oxygen species (ROS). In this work, a double ionic-type aggregation-induced emission luminogen (AIEgen) of TIdBO was developed as a photosensitizer, of which the potential photocyclization characteristic involving an electron-transfer process had a positive effect on Type I ROS generation in aggregates under continuous light irradiation. Its noticeable photodynamic therapy (PDT) performance and self-monitoring of PDT process by the relationship between cellular morphology change and fluorescence intensity enhancement were achieved. In addition, it showed a good killing ability to microbes and specific interactions with microbes but not cells by regulating the incubation time. These intriguing results reveal a feasible design principle for the implementation of efficient PS preparation in clinical treatment under hypoxic conditions.

Coordination-Driven Self-Assembly of Cyclometalated Iridium Squares Using Linear Aromatic Diisocyanides

Here, we demonstrate facile [4 + 4] coordination-driven self-assembly of cyclometalated iridium(III) using linear aryldiisocyanide bridging ligands (BLs). A family of nine new [Ir(C^N)₂(μ-BL)]₄⁴⁺ coordination cages is described, where C^N is the cyclometalating ligand-2-phenylpyridine (ppy), 2-phenylbenzothiazole (bt), or 1-phenylisoquinoline (piq)-and BL is the diisocyanide BL, with varying spacer lengths between the isocyanide binding sites. These supramolecular coordination compounds are prepared via a one-pot synthesis, with isolated yields of 40-83%. ¹H NMR spectroscopy confirms the selective isolation of a single product, which is affirmed to be the M₄L₄ square by high-resolution mass spectrometry. Detailed photophysical studies were carried out to reveal the nature of the luminescent triplet states in these complexes. In most cases, phosphorescence arises from the [Ir(C^N)₂]⁺ nodes, with the emission color determined by the cyclometalating ligand. However, in two cases, the lowest-energy triplet state resides on the aromatic core of the BL, and weak phosphorescence from that state is observed. This work shows that aromatic diisocyanide ligands enable coordination-driven assembly of inert iridium(III) nodes under mild conditions, producing supramolecular coordination complexes with desirable photophysical properties.

Self-assembled metallasupramolecular cages towards light harvesting systems for oxidative cyclization

Designing artificial light harvesting systems with the ability to utilize the output energy for fruitful application in aqueous medium is an intriguing topic for the development of clean and sustainable energy. We report here facile synthesis of three prismatic molecular cages as imminent supramolecular optoelectronic materials via two-component coordination-driven self-assembly of a new tetra-imidazole donor (L) in combination with 180°/120° di-platinum(ii) acceptors. Self-assembly of 180° trans-Pt(ii) acceptors A1 and A2 with L leads to the formation of cages Pt4 L 2(1a) and Pt8 L 2(2a) respectively, while 120°-Pt(ii) acceptor A3 with L gives the Pt8 L 2(3a) metallacage. PF6 - analogues (1b, 2b and 3b) of the metallacages possess a high molar extinction coefficient and large Stokes shift. 1b-3b are weakly emissive in dilute solution but showed aggregation induced emission (AIE) in a water/MeCN mixture as well as in the solid state. AIE active 2b and 3b in aqueous (90% water/MeCN mixture) medium act as donors for fabricating artificial light harvesting systems via Förster resonance energy transfer (FRET) with organic dye rhodamine-B (RhB) with high energy efficiency and good antenna effect. The metallacages 2b and 3b represent an interesting platform to fabricate new generation supramolecular aqueous light harvesting systems with high antenna effect. Finally, the harvested energy of the LHSs (2b + RhB) and (3b + RhB) was utilized successfully for efficient visible light induced photo-oxidative cross coupling cyclization of N,N-dimethylaniline (4) with a series of N-alkyl/aryl maleimides (5) in aqueous acetonitrile with dramatic enhancement in yields compared to the reactions with RhB or cages alone.