Two-Photon-Pumped Perovskite Semiconductor Nanocrystal Lasers

One-Step Fabrication of 0D Cs4PbBr6 Perovskite with Nonlinear Optical Properties for Ultrafast Pulse Generation

Low-dimensional lead halide perovskites demonstrate remarkable nonlinear optical characteristics attributed to their distinctive physical structures and electronic properties. Nevertheless, the investigation into their nonlinear optical properties remains in its incipient stages. This study addresses this gap by precisely controlling solvent volumes to synthesize both 0D Cs4PbBr6 and Cs4PbBr6/CsPbBr3 perovskites. Remarkably, as saturable absorbers, both pure Cs4PbBr6 and Cs4PbBr6/CsPbBr3 composites exhibit favorable nonlinear optical properties within the C-band, showcasing modulation depths of 9.22% and 16.83%, respectively. Moreover, for the first time, Cs4PbBr6 and Cs4PbBr6/CsPbBr3 composites have been successfully integrated into erbium-doped fiber lasers to realize the mode-locking operations. The utilization of the Cs4PbBr6/CsPbBr3 composites as a saturable absorber that enables the generation of conventional soliton mode-locked laser pulses with a pulse duration of 688 fs, and a repetition frequency of 10.947 MHz at a central wavelength of 1557 nm. Cs4PbBr6 is instrumental in generating laser pulses at a frequency of 10.899 MHz, producing pulse widths of 642 fs at the central wavelength of 1531.2 nm and 1.02 ps at the central wavelength of 1565.3 nm, respectively. The findings of this investigation underscore the potential utility of 0D Cs4PbBr6 and Cs4PbBr6/CsPbBr3 composites as promising materials for optical modulation within fiber laser applications.

Interplay between photoinduced charge and energy transfer in manganese doped perovskite quantum dots

A comprehensive study on the photo-excited relaxation dynamics in semiconducting perovskite quantum dots (PQDs) is pivotal in realizing their extensive potential for optoelectronics applications. Among different competing photoinduced relaxation kinetics, energy transfer and charge transfer (CT) in PQDs need special attention, as they often influence the device efficacy, particularly with the donor-acceptor hybrid architecture. In this work, we explore a detailed investigation into photoinduced CT dynamics in mixed halide undoped CsPb(Br/Cl)3 and Mn2+ doped CsPb(Br/Cl)3 PQDs with a quinone molecule, p-benzoquinone (BQ). The energy level alignment of undoped PQDs with BQ allows an efficient CT, whereas Mn2+ doping reduces the CT efficiency, experiencing a competition between energy transfer from host to dopant and CT to BQ. The conductive atomic force microscopy measurements unveil a direct correlation with the spectroscopic studies by showing a significant improvement in the conductance of undoped PQDs in the presence of BQ, while an inappreciable change is observed for doped PQDs. A much-reduced transition voltage and barrier height in the presence of BQ further validate faster CT for undoped PQD than the doped one. Furthermore, Mn2+ doping in PQDs is observed to enhance their stability, showing better air and thermal stability compared to their undoped counterparts. These results reveal that doping strategy can regulate the CT dynamics in these PQDs and increase their stability, which will be beneficial for the development of desired optoelectronic devices with long-term stability.

Highly Bright and Stable CsPbX3@Cs4PbX6 Hexagonal Nanoarchitectonics Created by Controlling Dissolution-Recrystallization of CsPbX3 Nanomaterials

CsPbBr3@Cs4PbBr6 hexagonal NCs with a bright photoluminescence (PL) peak of 456 nm are created through the dissolution-recrystallization of CsPbBr3 nanoplatelets. Small CsPbBr3 nanocrystals are encapsulated in hexagonal Cs4PbBr6 during recrystallization to form a core-shell structure and keep high brightness and stability. The recrystallization kinetics is systematically investigated to explore the roles of methyl acetate, oleylamine, and n-hexane. Result further indicates that core/shell NCs remained high PL under a variety of harsh conditions (e.g., light irradiation and heat treatment) because of Cs4PbX6 shell and the controlling of recrystallization. Their initial PL intensity is remained after 4 months of storage under ambient conditions and continuous exposure to UV lamp for 180 min. The bright PL is also maintained even treatment at 120 °C. To indicate the universality of this synthesis method, CsPbX3@Cs4PbX6 hexagonal NCs with different emission colors are fabricated by changing temperature, solvent viscosity, and precursors (e,g, oleylamine and halogens). These core-shell samples reveal bright and stable green, orange, and red PL. Because of its high stability, the core/shell NCs are dispersed in flexible films to create diverse patterns. The films also exhibit high brightness and excellent stability. This strategy opens a novel avenue for the application of perovskite nanomaterials in the display field.

Exceptional Stability against Water, UV Light, and Heat for CsPbBr3@Pb-MOF Composites

All-inorganic lead halide perovskite nanocrystals (NCs) have been widely applied in optoelectronic devices owing to their excellent photoluminescence (PL) properties. However, poor stability upon exposure to water, UV light or heat strongly limits their practical application. Herein, CsPbBr3@Pb-MOF composites with exceptional stability against water, UV light, and heat are synthesized by ultrasonic processing the precursors of lead-based MOF (Pb-MOF), oleylammonium bromide (OAmBr) and cesium oleate (Cs-OA) solutions at room temperature. Pb-MOF can not only provide the lead source for the in situ growth of CsPbBr3 NCs, but also the protective layer of perovskites NCs. The formed CsPbBr3@Pb-MOF composites show a considerable PL quantum yield (PLQY) of 67.8%, and can maintain 90% of the initial PL intensity when immersed in water for 2 months. In addition, the outstanding PL stability against UV light and heat is demonstrated with CsPbBr3 NCs synthesized by the conventional method as a comparison. Finally, a green (light-emitting diode) LED is fabricated using green-emitting CsPbBr3@Pb-MOF composites and exhibits excellent stability without packaging when immersed in water for 30 days. This study provides a practical approach to improve the stability in aqueous phase, which may pave the way for future applications for various optoelectronic devices.

On-Substrate Fabrication of CsPbBr3 Single-Crystal Microstructures via Nanoparticle Self-Assembly-Assisted Low-Temperature Sintering

The growth of all-inorganic perovskite single-crystal microstructures on substrates is a promising approach for constructing photonic and electronic microdevices. However, current preparation methods typically involve direct control of ions or atoms, which often depends on specific lattice-matched substrates for epitaxial growth and other stringent conditions that limit the mild preparation and flexibility of device integration. Herein, we present the on-substrate fabrication of CsPbBr3 single-crystal microstructures obtained via a nanoparticle self-assembly assisted low-temperature sintering (NSALS) method. Sintering guided by self-assembled atomically oriented superlattice embryos facilitated the formation of single-crystal microstructures under mild conditions without substrate dependence. The as-prepared on-substrate microstructures exhibited a consistent out-of-plane orientation with a carrier lifetime of up to 82.7 ns. Photodetectors fabricated by using these microstructures exhibited an excellent photoresponse of 9.15 A/W, and the dynamic optical response had a relative standard deviation as low as 0.1831%. The discrete photosensor microarray chip with 174000 pixels in a 100 mm2 area showed a response difference of less than 6%. This method of nanoscale particle-controlled single crystal growth on a substrate offers a perspective for mild-condition preparation and in situ repair of crystals of various types. This advancement can propel the flexible integration and widespread application of perovskite devices.

Photophysics and its application in photon upconversion

Photoluminescence (PL) upconversion is a phenomenon involving light-matter interaction, where the energy of the emitted photons is higher than that of the incident photons. PL upconversion has promising applications in optoelectronic devices, displays, photovoltaics, imaging, diagnosis and treatment. In this review, we summarize the mechanism of PL upconversion and ultrafast PL physical processes. In particular, we highlight the advances in laser cooling, biological imaging, volumetric displays and photonics.

Size Dependence of Trion and Biexciton Binding Energies in Lead Halide Perovskite Nanocrystals

Lead halide perovskite nanocrystals (NCs) have attracted much attention as light-source materials for light-emitting diodes, lasers, and quantum light emitters. The luminescence properties of perovskite NCs and the performance of NC-based light-source devices depend on trion and biexciton dynamics. Here, we examined the size dependence of trion and biexciton binding energies by conducting low-temperature single-dot spectroscopy on three different perovskite NCs: CsPbBr3, CsPbI3, and FAPbBr3. While the photoluminescence spectral widths of the all-inorganic CsPbBr3 and CsPbI3 NCs were narrow, compared with those of the organic-inorganic hybrid FAPbBr3 NCs, the binding energies of trions and biexcitons of all three samples showed similar size dependences, independent of the A-site cation and halogen. The effective-mass approximation calculations implied the importance of dynamical dielectric screening on the formation of trions and biexcitons.

Two-Color Amplified Spontaneous Emission from Auger-Suppressed Quantum Dots in Liquids

Colloidal quantum-dot (QD) lasing is normally achieved in close-packed solid-state films, as a high QD volume fraction is required for stimulated emission to outcompete fast Auger decay of optical-gain-active multiexciton states. Here a new type of liquid optical-gain medium is demonstrated, in which compact compositionally-graded QDs (ccg-QDs) that feature strong suppression of Auger decay are liquefied using a small amount of solvent. Transient absorption measurements of ccg-QD liquid suspensions reveal broad-band optical gain spanning a wide spectral range from 560 (green) to 675 nm (red). The gain magnitude is sufficient to realize a two-color amplified spontaneous emission (ASE) at 637 and 594 nm due to the band-edge (1S) and the excited-state (1P) transition, respectively. Importantly, the ASE regime is achieved using quasicontinuous excitation with nanosecond pulses. Furthermore, the ASE is highly stable under prolonged excitation, which stands in contrast to traditional dyes that exhibit strong degradation under identical excitation conditions. These observations point toward a considerable potential of high-density ccg-QD suspensions as liquid, dye-like optical gain media that feature readily achievable spectral tunability and stable operation under intense photoexcitation.

The Role of Antisolvents with Different Functional Groups in the Formation of Cs4PbBr6 and CsPbBr3 Particles

Compared to the high-temperature hot injection (HI) technique, the room-temperature supersaturated recrystallization (SR) approach is more hopeful to realize the industrialized production of CsPbX3 (X = Cl, Br, and I) nanomaterials. However, accurate compositional control of the product is still difficult, and the role and underlying mechanism of antisolvents in the reprecipitation process remain unclear. Herein, CsPbBr3 particles and CsPbBr3/Cs4PbBr6 composites with certain proportions are synthesized using different antisolvents with the SR method. By adjustment of the polarity or functional group of antisolvents, it is found that the functional groups of antisolvents have a major impact on the composition of the products. Furthermore, the influential mechanism of different antisolvents on the compositions of products is investigated by combining electrostatic potential calculations and ultraviolet-visible absorption spectroscopy. It suggests that the interaction between functional groups of antisolvents and organic ligands influences the coordination status of the intermediate Pb-complex and further affects the separating rate of the Pb(II)-intermediate, leading to the formation of products with different compositions. A physicochemical mechanism is proposed to explain the formation of Cs4PbBr6 and CsPbBr3. This work deepens the understanding of the formation mechanism of all-inorganic metal halide perovskite-related materials based on the SR method and provides new routes to achieve their controllable preparation.

Sub-Single-Exciton Optical Gain in Lead Halide Perovskite Quantum Dots Revealed by Exciton Polarization Spectroscopy

Optical gain of colloidal quantum dots (QDs) is often attained in the multiexciton regime, which strongly complicates their lasing applications as the gain lifetime is limited by nonradiative Auger recombination occurring typically on the picosecond time scale. In principle, low-threshold gain can be achieved if the gain-active emission has a sizable red shift compared to the absorption. But, this mechanism has been rarely observed in typical QDs featuring small Stokes shift due to their weak electron-phonon coupling. Here, we report the observation of sub-single-exciton gain in CsPbI3 and CsPbBr3 perovskite QDs, which is unequivocally established through pinpointing the stimulated emission and biexciton absorption signatures using polarization-controlled femtosecond transient absorption spectroscopy. The soft lattice of perovskite QDs and hence strong electron-phonon coupling lead to two stimulated emission features from free and self-trapped excitons, respectively. In monodisperse QDs of varying sizes, the Stokes shift of the self-trapped exciton emission is sufficiently large to overcome the biexciton absorption loss and the inhomogeneous line width, enabling optical gain with average exciton occupancy down to <10%.

Large two-photon cross sections and low-threshold multiphoton lasing of CdS/CdSe/CdS quantum shells

Colloidal quantum shells are spherical semiconductor quantum wells, which have shown strong promise as optical materials, particularly in classes of experiments requiring multiple excitons. The two-photon properties of CdS/CdSe/CdS quantum shell samples are studied here to demonstrate large non-linear absorption cross-sections while retaining advantageous multiexciton physics conferred by the geometrical structure. The quantum shells have large two-phonon cross sections (0.4-7.9 × 106 GM), which highlights their potential use in upconversion imaging in which large per particle two-photon absorption is critical. Time-resolved measurements confirmed that the quantum shells have long biexciton lifetime (>10 ns in the largest core samples reported here) and large gain bandwidth (>300 meV). The combination of these attributes with large two-photon cross sections makes the CdS/CdSe/CdS quantum shells excellent gain media for two-photon excitation. With a broad gain bandwidth and long gain lifetime, quantum shell solids support multimodal amplified spontaneous emission from excitons, biexcitons, and higher excited states. Thresholds for amplified spontaneous emission and lasing, which are as low as 1 mJ cm-2, are comparable to, or lower than, the thresholds reported for other colloidal materials.

Ionic Solvent-Assisted MAPbBr3 Perovskite Film for Two-Photon Pumped Single-Mode Laser

Miniaturized coherent light sources on the nanoscale are highly desired for on-chip photonics integration. However, when approaching the diffraction limit, the sub-wavelength-scale all-dielectric lasers are difficult to realize due to the trade-off between lasing performance and physical size. Especially for a thin-film laser, usually an externally complex cavity is required to provide the necessary optical feedback. Herein, we successfully shrink the MAPbBr3 perovskite thin-film laser to sub-wavelength scale (300 nm) with simplified cavity design using only an ultraviolet glue layer and a quartz glass. The morphology quality and the gain properties of the film are enhanced by introducing ionic liquid. Consequently, the stable and low-threshold single-mode laser with a highly linear polarization degree of 78.6% and a narrow line width of 0.35 nm is achieved under two-photon excitation. The excellent single-mode laser with sub-wavelength scale and ultrasimplified structure could provide a facile and versatile platform for future integrated optoelectronic devices.

Ultraviolet-Visible-Short-Wavelength Infrared Broadband and Fast-Response Photodetectors Enabled by Individual Monocrystalline Perovskite Nanoplate

Perovskite-based photodetectors exhibit potential applications in communication, neuromorphic chips, and biomedical imaging due to their outstanding photoelectric properties and facile manufacturability. However, few of perovskite-based photodetectors focus on ultraviolet-visible-short-wavelength infrared (UV-Vis-SWIR) broadband photodetection because of the relatively large bandgap. Moreover, such broadband photodetectors with individual nanocrystal channel featuring monolithic integration with functional electronic/optical components have hardly been explored. Herein, an individual monocrystalline MAPbBr3 nanoplate-based photodetector is demonstrated that simultaneously achieves efficient UV-Vis-SWIR detection and fast-response. Nanoplate photodetectors (NPDs) are prepared by assembling single nanoplate on adjacent gold electrodes. NPDs exhibit high external quantum efficiency (EQE) and detectivity of 1200% and 5.37 × 1012 Jones, as well as fast response with rise time of 80 µs. Notably, NPDs simultaneously achieve high EQE and fast response, exceeding most perovskite devices with multi-nanocrystal channel. Benefiting from the high specific surface area of nanoplate with surface-trap-assisted absorption, NPDs achieve high performance in the near-infrared and SWIR spectral region of 850-1450 nm. Unencapsulated devices show outstanding UV-laser-irradiation endurance and decent periodicity and repeatability after 29-day-storage in atmospheric environment. Finally, imaging applications are demonstrated. This work verifies the potential of perovskite-based broadband photodetection, and stimulates the monolithic integration of various perovskite-based devices.

Amplified spontaneous emission from inclusions containing cesium lead bromide in glasses

Cesium lead halide (CsPbX3, X = Cl, Br and I) perovskite nanocrystals embedded glasses exhibit good optical properties and have potential as gain media. However, origins of the amplified spontaneous emission (ASE) from CsPbX3 nanocrystals are controversial. Here, it is found that ASE is from CsPbX3 nanocrystals in inclusions instead of CsPbX3 nanocrystals dispersed in the glass matrix. Inclusions with various sizes are capable of generating ASE, and ASE of the inclusions can sustain at energy densities as high as several tens of mJ/cm2. Thresholds of the fs laser energy densities increase with the increase in fs laser wavelength, and high net optical gain coefficient is obtained.

Revealing the influence of doping elements (Ge, Sn, Ca, and Sr) on the properties of α-CsPbI3: a DFT investigation

In this study, using density functional theory, we calculated the band structure and photoelectric properties in a series of 12.5% B-doped (B = Ge, Sn, Ca, and Sr) CsPbI3 perovskite systems. It is found that Ge doping can improve the structural stability and is more conducive to applications under high-pressure or by applying stress via calculating the bond length, formation energy, elastic properties, and electronic local function. In addition, the optimal direction for applying stress is achieved according to the elastic properties. Furthermore, in terms of electronic properties, the reason of energy band variation and the influence of chemical bond on the structural stability of doped α-CsPbI3 are investigated. The possibility of the applications of the CsPb0.875B0.125I3 perovskite is explored based on the optical properties. Thus, the theoretical study of the CsPb0.875B0.125I3 perovskite provides novel insights into the design of next-generation photoelectric and photovoltaic materials.

Carriers, Quasi-particles, and Collective Excitations in Halide Perovskites

Halide perovskites (HPs) are potential game-changing materials for a broad spectrum of optoelectronic applications ranging from photovoltaics, light-emitting devices, lasers to radiation detectors, ferroelectrics, thermoelectrics, etc. Underpinning this spectacular expansion is their fascinating photophysics involving a complex interplay of carrier, lattice, and quasi-particle interactions spanning several temporal orders that give rise to their remarkable optical and electronic properties. Herein, we critically examine and distill their dynamical behavior, collective interactions, and underlying mechanisms in conjunction with the experimental approaches. This review aims to provide a unified photophysical picture fundamental to understanding the outstanding light-harvesting and light-emitting properties of HPs. The hotbed of carrier and quasi-particle interactions uncovered in HPs underscores the critical role of ultrafast spectroscopy and fundamental photophysics studies in advancing perovskite optoelectronics.

Nonlinear two-photon pumped vortex lasing based on quasi-bound states in the continuum from perovskite metasurface

The experimental observation of nonlinear two-photon pumped vortex lasing from perovskite metasurfaces is demonstrated. The vortex lasing beam is based on symmetry-protected quasi-bound states in the continuum (QBICs). The topological charge is estimated to be +1 according to the simulation result. The quality factor and lasing threshold are around 1100 and 4.28 mJ/cm2, respectively. Theoretical analysis reveals that the QBIC mode originates from the magnetic dipole mode. The lasing wavelength can be experimentally designed within a broad spectral range by changing the diameter and periodicity of the metasurface. The finite array size effect of QBIC can affect the quality factor of the lasing and be used to modulate the lasing. Results shown in this study can lead to more complex vortex beam lasing from a single chip and previously unidentified ways to obtain ultrafast modulation of the QBIC lasing via the finite array size effect.

Emission properties of Pd-doped CsPbBr3 perovskite nanocrystal: Infrared emission due to the Pd-doping

Perovskite-type materials have attracted great attention in recent times due to their interesting characteristics, such as their luminescent properties. The good photoluminescence quantum yields as well as the possibility of tuning the emission wavelength has allowed the study of these materials in several applications, such as sensors or LEDs. As sensors, making nanocrystals of these perovskites emitting in the near infrared (NIR) would open the possibility of using these materials in biomedical applications. In the present work, Pd-doped CsPbBr₃ perovskite nanocrystals (NCs) were synthesized and characterized. We show here Pd-doped NCs synthesized emit in NIR, at about 875 nm, using a laser emitting at 785 nm as the excitation source. This result is really new and promising, because it opens the possibility of using these nanocrystals in many applications as sensor in the field of nanobiomedicine in the future.

Interpretable Machine Learning of Two-Photon Absorption

Molecules with strong two-photon absorption (TPA) are important in many advanced applications such as upconverted laser and photodynamic therapy, but their design is hampered by the high cost of experimental screening and accurate quantum chemical (QC) calculations. Here a systematic study is performed by collecting an experimental TPA database with ≈900 molecules, analyzing with interpretable machine learning (ML) the key molecular features explaining TPA magnitudes, and building a fast ML model for predictions. The ML model has prediction errors of similar magnitude compared to experimental and affordable QC methods errors and has the potential for high-throughput screening as additionally validated with the new experimental measurements. ML feature analysis is generally consistent with common beliefs which is quantified and rectified. The most important feature is conjugation length followed by features reflecting the effects of donor and acceptor substitution and coplanarity.

Synthesis and Applications of Halide Perovskite Nanocrystals in Optoelectronics

The perovskites used for optoelectronic devices have been more attractive during recent years due to their wide variety of advantages, such as their low cost, high photoluminescence quantum yield (PLQY), high carrier mobility, flexible bandgap tunability, and high light absorption ability. However, optoelectronic applications for traditional inorganic and organic materials present dilemmas due to their hardly tunable bandgap and instability. On the other hand, there are some more important benefits for perovskite nanocrystals, such as a size-dependent bandgap and the availability of anion exchange at room temperature. Therefore, perovskite NC-based applications are currently favored, offering a research direction beyond perovskite, and much research has focused on the stability issue and device performance. Thus, the synthesis and applications of perovskite NCs need to be thoroughly discussed for the future development of solar cells, light-emitting diodes, photodetectors, and laser research.

Near-Infrared LEDs Based on Quantum Cutting-Activated Electroluminescence of Ytterbium Ions

Cesium lead halide perovskite nanocrystals (PNCs) exhibit promising prospects for application in optoelectronic devices. However, electroactivated near-infrared (NIR) PNC light-emitting diodes (LEDs) with emission peaks over 800 nm have not been achieved. Herein, we demonstrate the electroactivated NIR PNC LEDs based on Yb³⁺-doped CsPb(Cl_1-xBr_x)₃ PNCs with extraordinary high NIR photoluminescence quantum yields over 170%. The fabricated NIR LEDs possess an irradiance of 584.7 μW cm^-2, an EQE of 1.2%, and a turn-on voltage of 3.1 V. The ultrafast quantum cutting process from the PNC host to Yb³⁺ has been revealed as the main mechanism of electroluminescence (EL)-activated Yb³⁺ for the first time via exploring how the trend between the EL intensity of PNC and Yb³⁺ varies with different voltages along with the tendency of temperature- and doping-concentration-dependent PL and EL spectra. This work will extend the application of PNCs to optical communication, night-vision devices, and biomedical imaging.

Size-dependent photoinduced transparency in colloidal CdTe quantum dots in the strong confinement regime: an inverse linear relationship

Nanomaterials have been investigated as saturable absorbers for ultrafast lasers because of their large photoinduced transparency related to ground-state bleaching. However, the quantum dot size effect on the photoinduced transparency in the strong confinement regime has not been explored due to the challenge of accurately measuring the ground state and the excited-state absorption cross-sections. At the same time, these optical properties are essential to calculate several chemical and physical quantities at the nanoscale. In this context, we have employed the photoluminescence saturation method to determine the ground-state absorption cross-section and the femtosecond open-aperture Z-scan technique to investigate the size-dependent ground-state bleaching of glutathione-capped CdTe QDs synthesized in an aqueous medium. The results were modeled using rate equations within the three-energy levels approach. Our results pointed out that the photoinduced transparency rate at the 1S_3/2(h) → 1S(e) transition peak presents an inverse linear relationship with the QD diameter (from 2.2 nm up to 3 nm). Otherwise, the larger QDs have a higher ground-state cross-section, which is directly proportional to the ground-state bleaching. To explain this apparent contradiction, we calculate the effective absorption coefficient α_eff = σ/V (σ is the absorption cross section and V is the QD volume) for the QDs and observed that the smaller QDs have a higher absorption from the ground to the first excited state, corroborating our results. Finally, our results showed that the saturable absorption effect in CdTe-QDs is slightly higher than that obtained for graphene and other 2D materials and smaller than the black phosphorus in the visible region.

Investigation of Two Photon Absorption of Ligand-Modified CsPbBr3 Quantum Dots

The characteristics and application of nonlinear absorption from CsPbBr₃ QDs film with the ligand-modified strategy have been investigated in this work. By means of a near-infrared fs Ti:sapphire laser as a light source, the up-conversion emission of CsPbBr₃ QDs film of around 518 nm revealed a quadratic increase with the pump intensity. Through the temperature-dependent up-conversion emission, we obtained the binding energy and longitudinal optical (LO) phonon energy of CsPbBr₃ QDs film of around 58.1 and 61.2 meV, respectively. Due to more active thermal coupling between the excited electron or hot phonon effect, the photon decay trace under two-photon excitation was prolonged at higher temperatures. The ligand-modified CsPbBr₃ QDs film exhibits a relatively large TPA coefficient of around 28.6 cm/GW by the open aperture Z-scan measurement, and it has been demonstrated as a promising nonlinear medium to obtain the pulsewidth of ultrafast lasers.

Recent progress and future prospects on halide perovskite nanocrystals for optoelectronics and beyond

As an emerging new class of semiconductor nanomaterials, halide perovskite (ABX₃, X = Cl, Br, or I) nanocrystals (NCs) are attracting increasing attention owing to their great potential in optoelectronics and beyond. This field has experienced rapid breakthroughs over the past few years. In this comprehensive review, halide perovskite NCs that are either freestanding or embedded in a matrix (e.g., perovskites, metal-organic frameworks, glass) will be discussed. We will summarize recent progress on the synthesis and post-synthesis methods of halide perovskite NCs. Characterizations of halide perovskite NCs by using a variety of techniques will be present. Tremendous efforts to tailor the optical and electronic properties of halide perovskite NCs in terms of manipulating their size, surface, and component will be highlighted. Physical insights gained on the unique optical and charge-carrier transport properties will be provided. Importantly, the growing potential of halide perovskite NCs for advancing optoelectronic applications and beyond including light-emitting devices (LEDs), solar cells, scintillators and X-ray imaging, lasers, thin-film transistors (TFTs), artificial synapses, and light communication will be extensively discussed, along with prospecting their development in the future.

Competing Energy Transfer-Modulated Dual Emission in Mn2+-Doped Cs2NaTbCl6 Rare-Earth Double Perovskites

A₂B^IB^IIIX₆ double perovskites are promising materials due to their outstanding photoelectronic properties and excellent stability in the environment. Herein, we synthesized Mn²⁺:Cs₂NaTbCl₆ with dual emission through a solvothermal method for the first time. Mn²⁺:Cs₂NaTbCl₆ double perovskites exhibit excellent environmental stability and high photoluminescence quantum yields (PLQYs). The Cs₂NaTbCl₆ was successfully doped with Mn²⁺ in two modes: at Mn-feeding concentrations below 1%, Mn²⁺ first tend to insert into the interstitial void, but if the Mn-feeding concentration exceeds 1%, Mn²⁺ will further substitute Na⁺ site of the Cs₂NaTbCl₆ lattice and thus both two doping modes coexist. After Mn²⁺ doping, efficient energy transfer from the ⁵D₄ level of Tb³⁺ ions to the ⁴T₁ level of Mn²⁺ ions occurs, resulting in tunable dual emission from the Tb³⁺⁵D₄ → ⁷F_J=6,5,4,3 transition and Mn²⁺⁴T₁ → ⁶A₁ transition. Further, LED based on the Mn²⁺:Cs₂NaTbCl₆ double perovskites exhibits excellent performance and stability. This work demonstrates a strategy to achieve novel lanthanide-based double perovskites with potential applications in photonics.

Two-photon absorption in halide perovskites and their applications

Active research on halide perovskites has given us a deep understanding of this family of materials and their potential for applications in advanced optoelectronic devices. One of the prominent outcomes is the use of perovskite materials for nonlinear optical applications. Two-photon absorption in perovskites, in particular their nanostructures, has been extensively studied and shows huge promise for many applications. However, we are still far from a thorough understanding of two-photon absorption in halide perovskites from a micro to macro perspective. Here we summarize different techniques for studying the two-photon absorption in nonlinear optical materials. We discuss the in-depth photophysics in two-photon absorption in halide perovskites. A comprehensive summary about the factors which influence two-photon absorption provides the direction to improve the two-photon absorption properties of halide perovskites. A summary of the recent applications of two-photon absorption in halide perovskites provides inspirations for engineers to utilize halide perovskites in two-photon absorption device development. This review will help readers to have a comprehensive and in-depth understanding of the research field of two-photon absorption of halide perovskites from microscopic mechanisms to applications. The article can serve as a manual and give inspiration for future researchers.

Two-Photon Lasing from Two-Dimensional Homologous Ruddlesden-Popper Perovskite with Giant Nonlinear Absorption and Natural Microcavities

Two-dimensional Ruddlesden-Popper perovskites (RPPs) with multiple quantum well-like structures, strong excitonic quantum confinement, and high stability are promising optical gain media. However, the lasing from such material with a small number of inorganic well layers is difficult to achieve. Herein, we demonstrate the low-threshold upconversion lasing from the homologous RPP (PEA)₂(MA)_n-1Pb_nI_3n+1 (n = 2 and 3) microflakes with wavelength varies from 598 to 637 nm under 800 nm laser excitation at low temperature (≤153 K). Using the micro Z-scan technique, we discovered that the RPP flakes have a giant two-photon absorption coefficient β as high as 3.6 × 10³ cm GW^-1, resulting in the effective upconversion transition under two-photon excitation. Furthermore, the self-formation of Fabry-Pérot microcavities provides the support for lasing emission from the n ≥ 2 RPP flakes. Calculation results and microscopic transient absorption measurements reveal that low-threshold lasing is due to the high differential gain coefficient and the suppressed nonradiative Auger recombination rate inside the quantum confinement structures. These properties enable RPPs as potential gain media for developing upconversion microcavity lasers.

Lasing Action from Quasi-Propagating Modes

Band edges at the high symmetry points in reciprocal space of periodic structures hold special interest in materials engineering for their high density of states. In optical metamaterials, standing waves found at these points have facilitated lasing, bound-states-in-the-continuum, and Bose-Einstein condensation. However, because high symmetry points by definition are localized, properties associated with them are limited to specific energies and wavevectors. Conversely, quasi-propagating modes along the high symmetry directions are predicted to enable similar phenomena over a continuum of energies and wavevectors. Here, quasi-propagating modes in 2D nanoparticle lattices are shown to support lasing action over a continuous range of wavelengths and symmetry-determined directions from a single device. Using lead halide perovskite nanocrystal films as gain materials, lasing is achieved from waveguide-surface lattice resonance (W-SLR) modes that can be decomposed into propagating waves along high symmetry directions, and standing waves in the orthogonal direction that provide optical feedback. The characteristics of the lasing beams are analyzed using an analytical 3D model that describes diffracted light in 2D lattices. Demonstrations of lasing across different wavelengths and lattice designs highlight how quasi-propagating modes offer possibilities to engineer chromatic multibeam emission important in hyperspectral 3D sensing, high-bandwidth Li-Fi communication, and laser projection displays.

Alcohol-Stable Perovskite Nanocrystals and Their In Situ Capsulation with Polystyrene

In recent years, lead halide perovskite nanocrystals (PNCs) have presented potential scalable applications in all fields due to their outstanding properties. However, most commonly used PNCs capped with oleic acid (OA) and oleylamine (OAm) suffer from bad stability in polar solutions and thus require various surface protections with organic or inorganic materials. Encapsulation with highly hydrophobic polystyrene (PS) is one of the most efficient ways to protect PNCs; however, the presently used swelling-shrinking strategy faces several challenges, such as weak interaction between PS chains and the surface ligands in nonpolar media causing a low encapsulation efficiency, and serious aggregation of PS particles during the shrinkage process leading to very different particle sizes. Herein, alcohol-stable polyacrylic acid-capped CsPbBr3 PNCs (i.e., PAA-PNCs) are first synthesized and then in situ encapsulated with PS shells by polymerizing styrene monomer on the PNC surfaces in a polar organic solvent (e.g., ethanol). The in situ PS-encapsulated PAA-PNCs (i.e., PAA-PNCs@iPS) exhibit outstanding monodispersity, remarkable water, heat, and UV stability, high fluorescence activity, and color purity. The unique synthesis strategy and good performances of PAA-PNCs@iPS will boost the applications of PNCs in LEDs, biological imaging, and chemosensing.

Photophysical and photoelectrochemical properties of CsPbBr3 films grown by an electrochemically assisted deposition

Perovskite have had a great impact on the solid-state physics world in the last decade not only achieving great success in photovoltaics but, more recently, also in the implementation of other optoelectronic devices. One of the main obstacles for the adoption of Pb-based perovskite technologies are the high amounts of Pb needed in the conventional preparation methods. Here we present for the first time a detailed analysis of the photophysical and photoelectrochemical properties of CsPbBr3 films directly grown on FTO coated glass through a novel technique based in the electrodeposition of PbO2 as CsPbBr3 precursor. This technique allows to save up to 90 % of the Pb used compared to traditional methods and can be scalable compared with the commonly used spin-coating process. The low temperature analysis of their photoluminescence spectra, performed in both steady state and time dependence, revealed a strong interaction between electrons and longitudinal optical phonons dominant at high temperatures. On the other hand, the electrochemical and photoelectrochemical analysis proves that CsPbBr3 prepared using this new method has state-of-the-art features, showing a p-type behavior under depletion regime. This is also confirmed by photoelectrochemical measurements using p-benzoquinone as target molecule. These results prove that the proposed method can be used to produce excellent CsPbBr3 films, saving much of the lead waste.

Aromatic Amino Acid-Mediated Perovskite Nanocrystals: Fluorescence Tuning and Morphological Evolution

Lead halide perovskites with high fluorescent and tunable morphology appeared at the forefront of materials chemistry because of their corresponding impressive optoelectronic properties. The current advancement of metal halide perovskites put forward the functional and bidentate ligand to expand their utilization in modified ligand chemistry. We successfully introduced nontoxic aromatic amino acid as a capping ligand to synthesize the perovskite nanocrystals (PNCs). The implementation of aromatic amino acid for the construction of CsPbX₃ nanocrystals (NCs) provides the synergetic service of the carboxylic and amine groups with the phenyl residue, which prompts the formation of NCs with high fluorescence intensity. The experimental results demonstrate the emissive property of PNCs in a whole visible region with long-term stability. Additionally, the morphology of the NCs has been tuned. We performed several characterization techniques to investigate the nature of the NCs in the solid and solution phases.

Spontaneous Formation of Lead-Free Cs3 Cu2 I5 Quantum Dots in Metal-Organic-Frameworks with Deep-Blue Emission

All-inorganic lead-free Cs₃ Cu₂ I₅  perovskite-derivant quantum dots (QDs) have attracted tremendous attention due to their nontoxicity and unique optoelectronic properties. However, the traditional hot-injection method requires high temperatures and multiple ligands to confine the growth of QDs. Herein, a strategy is reported to spontaneously synthesize ultrasmall Cs₃ Cu₂ I₅  QDs within metal-organic-frameworks (MOFs) MOF-74 at room temperature (RT) with an average diameter of 4.33 nm. The obtained Cs₃ Cu₂ I₅  QDs exhibit an evident deep-blue emission with Commission Internationale de L'Eclairage coordinates of (0.17, 0.07), owing to the strong quantum confinement effect. Due to the protection of MOF-74, the Cs₃ Cu₂ I₅  QDs demonstrate superior stability, and the photoluminescence quantum yield retains 89% of the initial value after the storage of 1440 h under the environment with relative humidity exceeding 70%. Besides, triplet-triplet annihilation upconversion emission is observed within the composite of Cs₃ Cu₂ I₅ @MOF-74, which brings out apparent temperature-dependent photoluminescence. This study reveals a facile method for fabricating ultrasmall lead-free perovskite-derivant QDs at RT without multiple ligands. Besides, the temperature-dependent photoluminescence of Cs₃ Cu₂ I₅ @MOF-74 may open up a new way to develop the applications of temperature sensors or other related optoelectronic devices.

All Optical Switching through Anistropic Gain of CsPbBr3 Single Crystal Microplatelet

Perovskite micro/nanostructures have recently emerged as a highly attractive gain material for nanolasers. To explore their applications and further improve performance, it is essential to understand the optical gain and the anisotropic properties. Herein, we obtained high quality CsPbBr₃ microplatelets (MP) with anisotropic orthorhombic phase. Optical gain of CsPbBr₃ single crystal MP was investigated via microscale variable stripe-length measurement. A polarization-dependent optical gain was observed, and the gain along [002] was larger than that of [1-10]. The behavior was attributed to the lowest energy transition dipole moment of [002] induced by the smaller deviation of Br-Pb-Br bond from the perfect lattice. Along the [002] direction, we obtained the optical gain value up to 5077 cm^-1, which is the record value ever reported. Moreover, all optical switching of lasing is realized by periodical polarized excitation. Our results provide new perceptions in the design of novel functional anisotropic devices based on perovskite micro/nanostructures.

Achieving Up-Conversion Amplified Spontaneous Emission through Spin Alignment between Coherent Light-Emitting Excitons in Perovskite Microstructures

Metal hybrid perovskites have presented interesting infrared-to-visible up-conversion light-emitting lasing properties through multi-photon absorption. Here, when the optical pumping switches between circular and linear polarization, up-conversion amplified spontaneous emission (ASE) intensity exhibits large and small amplitudes, respectively, leading to a positive up-conversion ΔASE in the CsPbBr3 perovskite microrods. This observed phenomenon demonstrates that the coherent interaction between coherent light-emitting excitons is indeed established at the up-conversion ASE regime in the CsPbBr3 perovskite microrods. In addition, the positive up-conversion ΔASE indicates the orbital magnetic dipoles between coherent light-emitting excitons are conserved during up-conversion ASE action. Essentially, the up-conversion ΔASE results provide evidence that shows up-conversion ASE can be realized by the orbit−orbit polarization interaction between light-emitting excitons. Moreover, up-conversion ASE proportionally increased as the pumping fluence increased, which shows that orbit–orbit polarization interaction can be gradually enhanced between coherent light-emitting excitons by increasing pumping density in the CsPbBr3 perovskite microrods. Substantially, our studies provide a fundamental understanding of the spin alignment between coherent light-emitting excitons towards developing spin-dependent nonlinear lasing actions in metal halide perovskites.

Photoinduced Transformation of Cs2Au2Br6 into CsPbBr3 Nanocrystals

Lead-free halide double perovskites offer an environmentally friendly alternative to lead halide perovskites for designing optoelectronic solar cell devices. One simple approach to synthesize such double halide perovskites is through metal ion exchange. CsPbBr₃ nanocrystals undergo exchange of Pb²⁺ with Au(I)/Au(III) to form double perovskite Cs₂Au₂Br₆. When excited, a majority of the charge carriers undergo quick recombination in contrast to long-lived charge carries of excited CsPbBr₃ nanocrystals. This metal ion exchange process is reversible as one can regenerate CsPbBr₃ by adding excess PbBr₂ to the suspension. Interestingly, when subjected to visible light irradiation, Cs₂Au₂Br₆ nanocrystals eject reduced Au from the lattice as evidenced from the formation of larger gold nanoparticles. The presence of residual Pb²⁺ ions in the suspension restores the original CsPbBr₃ composition. The results presented here provide insight into the dynamic nature of Au within the perovskite lattice under both chemical and light stimuli.

Synergistic Regulation Effect of Nitrate and Calcium Ions for Highly Luminescent and Robust α-CsPbI3 Perovskite

The α-CsPbI₃ nanocrystals (NCs) easily transform into yellow non-perovskite, accompanying with declining photoelectric properties that restricting their practical applications in diverse fields. Herein, the highly luminescent and robust α-CsPbI₃ NCs is achieved through engineering the lattice symmetry of perovskite, enabled by the synergistic effect of NO₃^- ion passivation and Ca²⁺ ion doping. The introduced NO₃^- ions enhance the phase-change energy barrier and the surface steric hindrance, thus promoting the formation of α-CsPbI₃ NCs with hyper-symmetric crystal structure, while the Ca²⁺ ion doping contributes to improving their lattice symmetry by significant regulation of the tolerance factor. As a result, the obtained α-CsPbI₃ NCs display an outstanding photoluminescence quantum yield of 96.6%, together with the reduced defect state density and eminent conductivity. Most importantly, the as-engineered α-CsPbI₃ NCs exhibit excellent stability under ambient conditions for 9 months and UV illumination for 32 h. It displays brilliant thermal stability, maintaining luminous intensity for 15 min under 140 °C, and performing desired durability and reversibility, evidenced by 160 °C cyclic test and 120 °C reversibility test. Given enhanced robustness, the as-engineered α-CsPbI₃ NCs based light-emitting-diode devices are constructed, exhibiting a power efficiency of 105.3 lm W^-1 and the excellent working stability for 18 h.

A theoretical perspective of the ultrafast transient absorption dynamics of CsPbBr3

Transient absorption spectra (TAS) of lead halide perovskites can provide important insights into the nature of the photoexcited state dynamics of this prototypical class of materials. Here, we perform ground and excited state molecular dynamics (MD) simulations within a restricted open shell Kohn-Sham (ROKS) approach in order to interpret the characteristic features of the TAS of CsPbBr₃ . Our results reveal that properties such as the finite temperature band gap, the Stokes shift, and therefore, also the TAS are strongly size-dependent. Our TAS simulations show an early positive red-shifted feature on the fs scale that can be explained by geometric relaxation in the excited state. As excited-state processes can crucially affect the electronic properties of this class of photoactive materials, our observations are an important ingredient for further optimization of lead halide based optoelectronic devices.

Recent Development of Optoelectronic Application Based on Metal Halide Perovskite Nanocrystals

In the past years, metal halide perovskite (MHP) single crystals have become promising candidates for optoelectronic devices since they possess better optical and charge transport properties than their polycrystalline counterparts. Despite these advantages, traditional bulk growth methods do not lend MHP single crystals to device integration as readily as their polycrystalline analogues. Perovskite nanocrystals (NCs), nanometer-scale perovskite single crystals capped with surfactant molecules and dispersed in non-polar solution, are widely investigated in solar cells and light-emitting diodes (LEDs), because of the direct bandgap, tunable bandgaps, long charge diffusion length, and high carrier mobility, as well as solution-processed film fabrication and convenient substrate integration. In this review, we summarize recent developments in the optoelectronic application of perovskite nanocrystal, including solar cells, LEDs, and lasers. We highlight strategies for optimizing the device performance. This review aims to guide the future design of perovskite nanocrystals for various optoelectronic applications.

Improved One- and Multiple-Photon Excited Photoluminescence from Cd2+-Doped CsPbBr3 Perovskite NCs

Metal halide perovskite nanocrystals (NCs) attract much attention for light-emitting applications due to their exceptional optical properties. More recently, perovskite NCs have begun to be considered a promising material for nonlinear optical applications. Numerous strategies have recently been developed to improve the properties of metal halide perovskite NCs. Among them, B-site doping is one of the most promising ways to enhance their brightness and stability. However, there is a lack of study of the influence of B-site doping on the nonlinear optical properties of inorganic perovskite NCs. Here, we demonstrate that Cd²⁺ doping simultaneously improves both the linear (higher photoluminescence quantum yield, larger exciton binding energy, reduced trap states density, and faster radiative recombination) and nonlinear (higher two- and three-photon absorption cross-sections) optical properties of CsPbBr₃ NCs. Cd²⁺ doping results in a two-photon absorption cross-section, reaching 2.6 × 10⁶ Goeppert-Mayer (GM), which is among the highest reported for CsPbBr₃ NCs.

Elucidating the oxygen reduction reaction mechanism on the surfaces of 2D monolayer CsPbBr3 perovskite

The oxygen reduction reaction (ORR) is an indispensable reaction in electrochemical energy converting systems such as fuel cells.

A comparative study of the mechanical stability, electronic, optical and photocatalytic properties of CsPbX3 (X = Cl, Br, I) by DFT calculations for optoelectronic applications

Organic free Cs-based perovskite materials are potential candidates for electronic and optoelectronic applications. A systematic comparative study of the mechanical, electronic, optical, and photocatalytic properties of CsPbX₃ (X = Cl, Br, I) was conducted using density functional theory to compare the applicability of these materials in optoelectronic, photocatalytic, and photovoltaic (PV) devices. We calculated structural and elastic properties to determine the better agreement of damage-tolerance and electronic and optical responses for suitable device applications. Optimized lattice parameters and elastic constants showed excellent agreement with the experimental data whereas some properties were found to be much better than other theoretical reports. CsPbBr₃ is thermodynamically more stable and more ductile compared to the other two perovskites. The hydrostatic pressure dependent mechanical stability showed that CsPbCl₃ and CsPbBr₃ sustained stability under low applied pressure, whereas the stability of CsPbI₃ was very high. The electronic band gap calculations showed that CsPbCl₃, CsPbBr_3, and CsPbI₃ are suitable for green, orange, and red emissions of optical spectra owing to the proper electronic band gaps. CsPbI₃ can be shown as the best photocatalyst for the hydrogen evolution reaction and CsPbBr₃ is the most stable photocatalyst due to its nearly balanced oxidation and reduction potentials, but CaPbCl₃ is better for O₂ production. The density of states and other optical properties have been reported in this study. Thus, our findings would be beneficial for experimental studies and can open a new window for efficient electronic, optoelectronic, and hydrogen production along with the biodegradation of polluted and waste materials.

Organic free Cs-based perovskite materials are potential candidates for electronic and optoelectronic applications.

Solution-processed whispering-gallery-mode microsphere lasers based on colloidal CsPbBr3perovskite nanocrystals

Perovskite nanocrystals (NCs) have emerged as attractive gain materials for solution-processed microlasers. Despite the recent surge of reports in this field, it is still challenging to develop low-cost perovskite NC-based microlasers with high performance. Herein, we demonstrate low-threshold, spectrally tunable lasing from ensembles of CsPbBr₃NCs deposited on silica microspheres. Multiple whispering-gallery-mode lasing is achieved from individual NC/microspheres with a low threshold of ∼3.1μJ cm^-2and cavity quality factor of ∼1193. Through time-resolved photoluminescence measurements, electron-hole plasma recombination is elucidated as the lasing mechanism. By tuning the microsphere diameter, the desirable single-mode lasing is successfully achieved. Remarkably, the CsPbBr₃NCs display durable room-temperature lasing under ∼10⁷shots of pulsed laser excitation, substantially exceeding the stability of conventional colloidal NCs. These CsPbBr₃NC-based microlasers can be potentially useful in photonic applications.

Highly Tunable Enhancement and Switching of Nonlinear Emission from All-Inorganic Lead Halide Perovskites via Electric Field

Herein, we demonstrate a highly tunable enhancement and switching of nonlinear emission from all-inorganic metal halide perovskites based on an asymmetrically biased metal-insulator-semiconductor (MIS) structure. We achieve 2 orders of magnitude enhancement of the two-photon-pumped photoluminescence (TPL) from CsPbBr₃ microplates with the MIS structure, due to comprehensive effects including localized field effect, trap-filling effect, and collection enhancement. In particular, taking advantage of electric-field-induced passivation/activation of Br vacancies, we realize highly tunable TPL enhancement, ranging from ∼61.2-fold to ∼370.3-fold. Moreover, we demonstrate an efficient modulation of the two-photon-pumped lasing from the MIS structure, which exhibits electric field induced switching with a high on/off ratio of 67:1. This work has opened new avenues for steering carrier transport and nonlinear emission in lead halide perovskites, which shows great promise for realizing high-efficiency and tunable nonlinear nanophotonic devices.

Microfluidic synthesis of optically responsive materials for nano- and biophotonics

Recently, nanomaterials demonstrating optical response under illumination, the so-called optically responsive nanoparticles (NPs), have found their broad application as optical switchers, gas adsorbents, data storage devices, and optical and biological sensors. Unique optical properties of such nanomaterials are strongly related to their chemical composition, geometrical parameters and morphology. Microfluidic approaches for NPs' synthesis allow overcoming the known critical stages in conventional synthesis of NPs due to a high rate of heat/mass transfer and precise regulation of synthesis conditions, which results in reproducible synthesis outcomes with the desired physico-chemical properties. Here, we review the recent advances in microfluidic approach for synthesis of optically responsive nanomaterials (plasmonic, photoluminescent, shape-changeable NPs), highlighting the general background of microfluidics, common considerations in the design of microfluidic chips (MFCs), and theoretical models of the NPs' formation mechanisms. Comparative analysis of microfluidic synthesis with conventional synthesis methods is provided further, along with the recent applications of optically responsive NPs in nano- and biophotonics.

Luminescence and Stability Enhancement of Inorganic Perovskite Nanocrystals via Selective Surface Ligand Binding

Colloidal lead halide perovskite nanocrystals (NCs) have recently emerged as one of the most promising light-emitting materials for optoelectronic devices with outstanding performance. However, the facile detachment of surface capping organic ligands from these NCs leads to very poor colloidal stability and durability. This is mainly due to the weak interfacial interactions between the inorganic perovskite core and ligands, high density of surface defect states, and aggregation of NCs. Here, using a combination of time-resolved laser spectroscopy and density functional theory (DFT) calculations, we explored the major impact of surface orientations and terminations for both CsPbBr₃ and Cs₄PbBr₆ NCs not only on the interfacial binding affinities with organic ligands but also on surface defect formation and NC aggregation. By rationalizing that surface trap states are responsible for the decrease in photoluminescence (PL) upon fabrication and purification, we propose a powerful ligand-engineering strategy for eliminating these trap states and preventing the aggregation of CsPbBr₃ and Cs₄PbBr₆ NCs. Interestingly, we find that the surface orientation and dimensionality determine the degree of interfacial interactions between the inorganic perovskite core and ligands and subsequently control the overall PL intensity and NC stability. Our results demonstrate that a treatment of as-synthesized CsPbBr₃ NCs consisting of the addition of extra oleylammonium bromide (OAmBr) as a capping ligand, allows the CsPbBr₃ NCs to retain their green emission with increased PL intensity and quantum yields and improves colloidal durability. On the other hand, the ultraviolet emissions of Cs₄PbBr₆ NCs are effectively increased upon addition of extra cesium oleate (CsOL) as the trap states induced by surface cesium ions are largely reduced by the formation of Cs-O bonds. Our work provides a robust and adequate ligand engineering approach to significantly enhance the optical behavior of perovskite NCs with different dimensionalities and various compositions and to achieve more efficient and stable light-harvesting devices.

Biphasic Liquid-Liquid Interface Limit Architecture of High-Quality Perovskite Single-Crystal Sheets for UV Photodetection

Thin organic-inorganic MAPbX₃ perovskite single-crystal sheets have become the hotspot of smart photodetectors because of their low number of trap states, high carrier mobility, long diffusion length, and effective light-receiving area. However, MAPbX₃ single crystals are so fragile that single-crystal perovskite sheets with a thickness of ≤100 μm are hard to obtain by cutting. Thin single-crystal MAPbX₃ sheets were synthesized by the biphasic liquid-liquid interface limit method with dimethicone/DMSO biphasic films and could be obtained with an adjustable thickness of 1-50 μm and improved crystal quality of the perovskite sheets. The thin MAPbX₃ single-crystal sheet-based photodetector exhibits a superior responsivity of 0.88 A W^-1, an external quantum efficiency of 276.8%, and an ultrahigh detectivity of 2.26 × 10¹¹ Jones under 395 nm irradiation at 3 V. These values are more than 500% as high as those of the bulk-crystal-based photodetector. In particular, the sheet-based photodetector could retain long-time stability after 4200 on-off cycles.

Near-Ergodic CsPbBr3 Perovskite Nanocrystal with Minimal Statistical Aging

Optical robustness, uniformity, ergodicity, statistical aging, etc. dictate the applicability of nanocrystals. Based on a series of multimodal statistical analyses such as the Kolmogorov-Smirnov test, Lévy statistics, etc., we demonstrate that for CsPbBr₃ perovskite nanocrystals (PNCs): (a) the extent of heterogeneity in the quality and associated physical processes is minimal; (b) the optical robustness is very high, and (c) indeed, a single PNC can depict optical behavior of its ensemble. In addition, toward prospective applications, an optically robust CsPbBr₃ PNC exhibits (i) near-ergodicity and (ii) minimal statistical aging, which are extremely vital and complementary to its high defect tolerance.

Current status on synthesis, properties and applications of CsPbX3(X = Cl, Br, I) perovskite quantum dots/nanocrystals

The quantum confinement effect and interesting optical properties of cesium lead halide (CsPbX₃; X = Cl, Br, I) perovskite quantum dots (QDs) and nanocrystals (NCs) have given a new horizon to lighting and photonic applications. Given the exponential rate at which scientific results on CsPbX₃NCs are published in the last few years, it can be expected that the research in CsPbX₃NCs will further receive increasing scientific interests in the near future and possibly lead to great commercial opportunities to realize these materials based practical applications. With the rapid progress in the single-photon emitting CsPbX₃QDs and NCs, practical applications of the quantum technologies such as single-photon emitting light-emitting diode, quantum lasers, quantum computing might soon be possible. But to reach at cutting edge of stable perovskite QDs/NCs, the study of fundamental insight and theoretical aspects of crystal design is yet insufficient. Even more, it has aroused many unanswered questions related to the stability, optical and electronic properties of the CsPbX₃QDs. Aim of the present review is to illustrate didactically a precise study of recent progress in the synthesis, properties and applications of CsPbX₃QDs and NCs. Critical issues that currently restrict the applicability of these QDs will be identified and advanced methodologies currently in the developing queue, to overcome the roadblock, will be presented. And finally, the prospects for future directions will be provided.