Temporal Control of Aptamer Biosensors Using Covalent Self-Caging To Shift Equilibrium

Construction of a Near-Infrared Photoswitched Nanomachine Powered by an Endogenous Trigger for Activatable Imaging of Intracellular MicroRNA and Amplified Photodynamic Therapy for Cancer Cells

DNA nanomachines could initiate the cascade reaction in an autonomous mode under the drive of triggers, which achieve the signal amplification for the bioimaging of intracellular biomarkers. Compared with the "always-on" nanomachine that possibly produces false-positive signals, a controllable nanomachine with the on-site activation could be better for accurate tumor imaging and precise tumor therapy. Till now, the endogenous and exogenous triggers have been developed to design the controllable nanosensors. However, their combinations to develop feasible DNA nanomachines have been rarely studied. Herein, we constructed a near-infrared (NIR)-light-controlled DNA nanomachine that was first activated by the NIR light and then induced a target-triggered amplification process under the drive of an endogenous stimulus. Owing to adenosine-5'-triphosphate (ATP) having much higher concentration in cancer cells than that in healthy cells and the extracellular fluid, the obtained DNA nanomachine was selectively activated in cancer cells with inhibited interference signals from the surrounding healthy tissues. With obvious advantages including the exogenous NIR light initiation, the selective activation by the target microRNA, and the sensitive acceleration by the ATP-induced strand recycling reaction, the constructed nanomachine could be used to image the intracellular microRNA with increased sensitivity. Besides, after modifying the DNA sequence with the photosensitizer molecules, the obtained nanomachine could perform the selective photodynamic therapy on the tumor sections with the outstandingly decreased side effects. Thus, we hope the designed nanomachine could provide some important hints to design feasible nanomachines for accurate tumor diagnosis and precise tumor therapy.

Aptamer Conformational Dynamics Modulate Neurotransmitter Sensing in Nanopores

Aptamers that undergo conformational changes upon small-molecule recognition have been shown to gate the ionic flux through nanopores by rearranging the charge density within the aptamer-occluded orifice. However, mechanistic insight into such systems where biomolecular interactions are confined in nanoscale spaces is limited. To understand the fundamental mechanisms that facilitate the detection of small-molecule analytes inside structure-switching aptamer-modified nanopores, we correlated experimental observations to theoretical models. We developed a dopamine aptamer-functionalized nanopore sensor with femtomolar detection limits and compared the sensing behavior with that of a serotonin sensor fabricated with the same methodology. When these two neurotransmitters with comparable mass and equal charge were detected, the sensors showed an opposite electronic behavior. This distinctive phenomenon was extensively studied using complementary experimental techniques such as quartz crystal microbalance with dissipation monitoring, in combination with theoretical assessment by the finite element method and molecular dynamic simulations. Taken together, our studies demonstrate that the sensing behavior of aptamer-modified nanopores in detecting specific small-molecule analytes correlates with the structure-switching mechanisms of individual aptamers. We believe that such investigations not only improve our understanding of the complex interactions occurring in confined nanoscale environments but will also drive further innovations in biomimetic nanopore technologies.

De Novo Evolution of an Antibody-Mimicking Multivalent Aptamer via a DNA Framework

Multivalent interactions can often endow ligands with more efficient binding performance toward target molecules. Generally speaking, a multivalent aptamer can be constructed via post-assembly based on chemical structural information of target molecules and pre-identified monovalent aptamers derived from traditional systematic evolution of ligands by exponential enrichment (SELEX) technology. However, many target molecules may not have known matched aptamer partners, thus a de novo evolution will be highly desired as an alternative strategy for directed selection of a high-avidity, multivalent aptamer. Here, inspired by the superiority of multivalent interactions between antibodies and antigens, a direct SELEX strategy with a preorganized DNA framework library for an "Antibody-mimicking multivalent aptamer" (Amap) selection to epithelial cell adhesion molecule (EpCAM), a model target protein is reported. The Amap presents a relatively good binding affinity through both aptamer moieties concurrently binding to EpCAM, which has been confirmed by affinity analysis and molecular modeling. Furthermore, dynamic interactions between Amap and EpCAM are directly visualized by magnetic tweezers at the single-molecule level. A nice binding affinity of Amap to EpCAM-positive cancer cells has also been verified, which hints that their Amap-SELEX strategy has the potential to be a new route for de novo evolution of multivalent aptamers.

Spatially Selective Monitoring of Subcellular Enzyme Dynamics in Response to Mitochondria-Targeted Photodynamic Therapy

Tracking spatial and temporal dynamics of bioactive molecules such as enzymes responding to therapeutic treatment is highly important for understanding of the related functions. However, in situ molecular imaging at subcellular level during photodynamic therapy (PDT) has been hampered by the limitations of existing methods. Herein, we present a multifunctional nanoplatform (termed as UR-HAPT) that is able to simultaneously monitor subcellular dynamics of human apurinic/apyrimidinic endonuclease 1 (APE1) during the near-infrared (NIR) light-mediated PDT. UR-HAPT was constructed by the combination of an upconversion nanoparticle-based PDT design and a mitochondria-targeting strategy with an APE1-responsive DNA reporter. Benefiting from the gain-of-function approach, activatable mitochondrial accumulation of APE1 in response to the oxidative stress was observed during the NIR light-triggered, mitochondria-targeted PDT process. We envision that this nanoplatform can be applicable to screen and evaluate potential enzyme inhibitors to improve the PDT efficacy.

Combating small molecule environmental contaminants: detection and sequestration using functional nucleic acids

Small molecule contaminants pose a significant threat to the environment and human health. While regulations are in place for allowed limits in many countries, detection and remediation of contaminants in more resource-limited settings and everyday environmental sources remains a challenge. Functional nucleic acids, including aptamers and DNA enzymes, have emerged as powerful options for addressing this challenge due to their ability to non-covalently interact with small molecule targets. The goal of this perspective is to outline recent efforts toward the selection of aptamers for small molecules and describe their subsequent implementation for environmental applications. Finally, we provide an outlook that addresses barriers that hinder these technologies from being widely adopted in field friendly settings and propose a path forward toward addressing these challenges.

Efficient delivery of a DNA aptamer-based biosensor into plant cells for glucose sensing through thiol-mediated uptake

DNA aptamers have been widely used as biosensors for detecting a variety of targets. Despite decades of success, they have not been applied to monitor any targets in plants, even though plants are a major platform for providing oxygen, food, and sustainable products ranging from energy fuels to chemicals, and high-value products such as pharmaceuticals. A major barrier to progress is a lack of efficient methods to deliver DNA into plant cells. We herein report a thiol-mediated uptake method that more efficiently delivers DNA into Arabidopsis and tobacco leaf cells than another state-of-the-art method, DNA nanostructures. Such a method allowed efficient delivery of a glucose DNA aptamer sensor into Arabidopsis for sensing glucose. This demonstration opens a new avenue to apply DNA aptamer sensors for functional studies of various targets, including metabolites, plant hormones, metal ions, and proteins in plants for a better understanding of the biodistribution and regulation of these species and their functions.

Light-Activated Nanodevice for On-Demand Imaging of miRNA in Living Cells via Logic Assembly

Low-abundance biomarker amplification detection systems have been widely used to detect miRNAs; however, "always active" systems are insufficient for high spatial and temporal control of miRNAs. Here, we constructed a light-activated nanodevice (LAN) based on DNA nanotechnology for high spatial and temporal precision detection of low-abundance miRNA. Light-activated hairpin probes and triple-helix molecular switches were modified on the surface of gold nanoparticles (AuNPs) to trigger miRNA on-demand imaging analysis by UV light activation. In the presence of both UV light and miRNA, the LAN releases hairpin DNA and completes the hybridization chain reaction (HCR) with the conformation-altered triple-helix molecular switch, enabling fluorescence imaging of low-abundance miRNAs in living cells. The current work provides an opportunity to develop light-activated signal amplification sensors that can accurately image miRNAs on-demand in both temporal and spatial dimensions.

Detection of small molecules by fluorescence intensity using single dye labeled aptamers and quencher transition metal ions

We describe herein an aptamer-based sensing approach that signal the presence of small-molecule targets when fluorescent DNA probes are challenged with the Ni²⁺ or Co²⁺ quencher metal ions. Functional oligonucleotides targeting L-tyrosinamide (L-Tym), adenosine (Ade) or cocaine (Coc) were end-labeled by the Texas-Red fluorophore. A fluorescence quenching occurred upon association of these transition metal ions with the free conjugates. The formation of the target-probe complex, by the way of variations in the overall binding of quencher metal ions along the DNA strands, led to a partial restoration (for the Ade and Coc systems) or a further attenuation (for the L-Tym system) of the fluorescence intensity. The absolute signal gain varied from 40 to 180% depending on the target-probe pair investigated. The approach was also used to detect the compound Ade in a spiked biological matrix in 1 min or less. The transition metal ion-based quenching strategy is characterized by its very simple implementation, low cost, and rapid signaling.

Stimuli-responsive assembly of bilingual peptide nucleic acids

Peptide nucleic acids (PNAs) are high-affinity synthetic nucleic acid analogs capable of hybridization with native nucleic acids. PNAs synthesized having amino acid sidechains installed at the γ-position along the backbone provide a template for a single biopolymer to simultaneously encode nucleic acid and amino acid sequences. Previously, we reported the development of “bilingual” PNAs through the synthesis of an amphiphilic sequence featuring separate blocks of hydrophobic and hydrophilic amino acid functional groups. These PNAs combined the sequence-specific binding activity of nucleic acids with the structural organization properties of peptides. Like other amphiphilic compounds, these γ-PNAs were observed to assemble spontaneously into micelle-like nanostructures in aqueous solutions and disassembly was induced through hybridization to a complementary sequence. Here, we explore whether assembly of these bilingual PNAs is possible by harnessing the nucleic acid code. Specifically, we designed an amphiphile-masking duplex system in which spontaneous amphiphile assembly is prevented through hybridization to a nucleic acid masking sequence. We show that the amphiphile is displaced upon introduction of a releasing sequence complementary to the masking sequence through toehold mediated displacement. Upon release, we observe that the amphiphile proceeds to assemble in a fashion consistent with our previously reported structures. Our approach represents a novel method for controlled stimuli-responsive assembly of PNA-based nanostructures.

“Bilingual” biopolymers comprised of γ-modified peptide nucleic acids can harness peptide and nucleic acid codes to direct assembly and recognition. Herein, we demonstrate stimuli-responsive assembly through a toehold-mediated displacement motif.

Photocaged amplified FRET nanoflares: spatiotemporal controllable of mRNA-powered nanomachines for precise and sensitive microRNA imaging in live cells

There is considerable interest in creating a precise and sensitive strategy for in situ visualizing and profiling intracellular miRNA. Present here is a novel photocaged amplified FRET nanoflare (PAFN), which spatiotemporal controls of mRNA-powered nanomachine for precise and sensitive miRNA imaging in live cells. The PAFN could be activated remotely by light, be triggered by specific low-abundance miRNA and fueled by high-abundance mRNA. It offers high spatiotemporal control over the initial activity of nanomachine at desirable time and site, and a ‘one-to-more’ ratiometric signal amplification model. The PAFN, an unprecedented design, is quiescent during the delivery process. However, upon reaching the interest tumor site, it can be selectively activated by light, and then be triggered by specific miRNA, avoiding undesirable early activation and reducing nonspecific signals, allowing precise and sensitive detection of specific miRNA in live cells. This strategy may open new avenues for creating spatiotemporally controllable and endogenous molecule-powered nanomachine, facilitating application at biological and medical imaging.

Exponential Increase in an Ionic Signal: A Dominant Role of the Space Charge Effect on the Outer Surface of Nanochannels

Nanochannels have advantage in sensitive analyses due to the confinement effects on ionic signal in nano- or sub-nanometric confines but could realize further gains by optimizing signal mechanism. Making target recognitions on the outer surface of nanochannels has been verified to improve target recognitions and signal conversions by maximizing surfaces accessible to targets and ions, but until recently, the signal mechanism has been still unclear. Using electroneutral peptide nucleic acid (PNA) and negative-charged DNA, we verified a dominant space charge effect on an ionic signal on the outer surface of nanochannels. A typical exponential increase of the ionic signal with the charge density on the outer surface has been demonstrated through the PNA-PNA, PNA-DNA, DNA-DNA hybrid, DNA cleavage, and hybridization chain reaction. These results challenge the essential role of steric hindrance on the ionic signal and describe a new ion passageway surrounded and accelerated by the stern layer of charged species on the nanochannel outer surface.

RE-SELEX: restriction enzyme-based evolution of structure-switching aptamer biosensors

Aptamers are widely employed as recognition elements in small molecule biosensors due to their ability to recognize small molecule targets with high affinity and selectivity. Structure-switching aptamers are particularly promising for biosensing applications because target-induced conformational change can be directly linked to a functional output. However, traditional evolution methods do not select for the significant conformational change needed to create structure-switching biosensors. Modified selection methods have been described to select for structure-switching architectures, but these remain limited by the need for immobilization. Herein we describe the first homogenous, structure-switching aptamer selection that directly reports on biosensor capacity for the target. We exploit the activity of restriction enzymes to isolate aptamer candidates that undergo target-induced displacement of a short complementary strand. As an initial demonstration of the utility of this approach, we performed selection against kanamycin A. Four enriched candidate sequences were successfully characterized as structure-switching biosensors for detection of kanamycin A. Optimization of biosensor conditions afforded facile detection of kanamycin A (90 μM to 10 mM) with high selectivity over three other aminoglycosides. This research demonstrates a general method to directly select for structure-switching biosensors and can be applied to a broad range of small-molecule targets.

PNA-Guided Peptide Engineering of Aptamer Sensor for Protease-Unlocked Molecular Imaging

Protease-triggered control of functional DNA has remained unachieved, leaving a significant gap in activatable DNA biotechnology. Here we disclose the design of a protease-activatable aptamer technology that can perform molecular sensing and imaging function in a tumor-specific manner. The system is constructed by locking structure-switching activity of aptamer using a rationally designed PNA-peptide-PNA triblock copolymer. Highly selective cleavage of the peptide substrate is achieved by protease-mediated enzymatic reaction that result in reduced binding affinity of PNA to the aptamer module, with the subsequently recovering its biosensing function. We demonstrated that the DNA/peptide/PNA hybrid system not only allows for tumor cell-selective ATP imaging in vitro , but it also produce a fluorescent signal in vivo with improved tumor specificity. This work illustrates the potential of bridging the gap between functional DNA field and peptide area for precise biomedical applications.

Conditionally Activated ("Caged") Oligonucleotides

Conditionally activated ("caged") oligonucleotides provide useful spatiotemporal control for studying dynamic biological processes, e.g., regulating in vivo gene expression or probing specific oligonucleotide targets. This review summarizes recent advances in caging strategies, which involve different stimuli in the activation step. Oligo cyclization is a particularly attractive caging strategy, which simplifies the probe design and affords oligo stabilization. Our laboratory developed an efficient synthesis for circular caged oligos, and a circular caged antisense DNA oligo was successfully applied in gene regulation. A second technology is Transcriptome In Vivo Analysis (TIVA), where caged oligos enable mRNA isolation from single cells in living tissue. We highlight our development of TIVA probes with improved caging stability. Finally, we illustrate the first protease-activated oligo probe, which was designed for caspase-3. This expands the toolkit for investigating the transcriptome under a specific physiologic condition (e.g., apoptosis), particularly in specimens where light activation is impractical.

Thermoreversible Control of Nucleic Acid Structure and Function with Glyoxal Caging

Controlling the structure and activity of nucleic acids dramatically expands their potential for application in therapeutics, biosensing, nanotechnology, and biocomputing. Several methods have been developed to impart responsiveness of DNA and RNA to small-molecule and light-based stimuli. However, heat-triggered control of nucleic acids has remained largely unexplored, leaving a significant gap in responsive nucleic acid technology. Moreover, current technologies have been limited to natural nucleic acids and are often incompatible with polymerase-generated sequences. Here we show that glyoxal, a well-characterized compound that covalently attaches to the Watson-Crick-Franklin face of several nucleobases, addresses these limitations by thermoreversibly modulating the structure and activity of virtually any nucleic acid scaffold. Using a variety of DNA and RNA constructs, we demonstrate that glyoxal modification is easily installed and potently disrupts nucleic acid structure and function. We also characterize the kinetics of decaging and show that activity can be restored via tunable thermal removal of glyoxal adducts under a variety of conditions. We further illustrate the versatility of this approach by reversibly caging a 2'-O-methylated RNA aptamer as well as synthetic threose nucleic acid (TNA) and peptide nucleic acid (PNA) scaffolds. Glyoxal caging can also be used to reversibly disrupt enzyme-nucleic acid interactions, and we show that caging of guide RNA allows for tunable and reversible control over CRISPR-Cas9 activity. We also demonstrate glyoxal caging as an effective method for enhancing PCR specificity, and we cage a biostable antisense oligonucleotide for time-release activation and titration of gene expression in living cells. Together, glyoxalation is a straightforward and scarless method for imparting reversible thermal responsiveness to theoretically any nucleic acid architecture, addressing a significant need in synthetic biology and offering a versatile new tool for constructing programmable nucleic acid components in medicine, nanotechnology, and biocomputing.

Spatiotemporally Controllable MicroRNA Imaging in Living Cells via a Near-Infrared Light-Activated Nanoprobe

In situ spatiotemporal microRNA (miRNA) imaging in mammal cells plays an essential role in illustrating its structures and biological functions. Herein, we proposed a near-infrared (NIR) light-activated nanoprobe for high-sensitive in situ controllable miRNA imaging in living cells. The NIR-activated nanoprobe employed an upconversion nanoparticle that acted as a NIR-to-UV transducer to trigger the following photocleavage toward a dumbbell DNA probe tethered on the surface of the nanoparticle. The structure change of the dumbbell probe then induced a catalytic hairpin assembly of target miRNAs, by which in situ readout of the amplified fluorescence signal was enabled. Additionally, both intracellular miRNA imaging and accurate quantification in live cells were realized without damaging the cell membranes. Compared with conventional in situ strategies, the proposed approach remarkedly increases imaging efficiency by eliminating those unfavored intercellular molecular imaging backgrounds. We assured that the proposed NIR-activated miRNA sensing strategy will add to the advancement for bioanalysis in living systems, which is of crucial importance in the diagnosis of various human diseases, especially cancers.

Probing the Mechanism of Structure-Switching Aptamer Assembly by Super-Resolution Localization of Individual DNA Molecules

Oligonucleotide aptamers can be converted into structure-switching biosensors by incorporating a short, typically labeled oligonucleotide that is complementary to the analyte-binding region. Binding of a target analyte can disrupt the hybridization equilibrium between the aptamer and the labeled-complementary oligo producing a concentration-dependent signal for target-analyte sensing. Despite its importance in the performance of a biosensor, the mechanism of analyte-response of most structure-switching aptamers is not well understood. In this work, we employ single-molecule fluorescence imaging to investigate the competitive kinetics of association of a labeled complementary oligonucleotide and a target analyte, l-tyrosinamide (L-Tym), interacting with an L-Tym-binding aptamer. The complementary readout strand is fluorescently labeled, allowing us to measure its hybridization kinetics with individual aptamers immobilized on a surface and located with super-resolution techniques; the small-molecule L-Tym analyte is not labeled in order to avoid having an attached dye molecule impact its interactions with the aptamer. We measure the association kinetics of unlabeled L-Tym by detecting its influence on the hybridization of the labeled complementary strand. We find that L-Tym slows the association rate of the complementary strand with the aptamer but does not impact its dissociation rate, suggesting an S_N1-like mechanism where the complementary strand must dissociate before L-Tym can bind. The competitive model revealed a slow association rate between L-Tym and the aptamer, producing a long-lived L-Tym-aptamer complex that blocks hybridization with the labeled complementary strand. These results provide insight about the kinetics and mechanism of analyte recognition in this structure-switching aptamer, and the methodology provides a general means of measuring the rates of unlabeled-analyte binding kinetics in aptamer-based biosensors.

Photocaged FRET nanoflares for intracellular microRNA imaging

Herein, we developed photocaged FRET nanoflares for spatiotemporal microRNA imaging in living cells. In other words, the probes will not work until they are exposed to UV light.

A photo-regulated aptamer sensor for spatiotemporally controlled monitoring of ATP in the mitochondria of living cells

Fluorescent aptamer sensors have shown enormous potential for intracellular imaging of small molecule metabolites. Since metabolites distribute differently at different subcellular locations and their concentrations and locations fluctuate with time, methods are needed for spatiotemporally controlled monitoring of these metabolites. Built upon previous success in temporal control of aptamer-based sensors, we herein report an aptamer sensor containing a photocleavable linker and using DQAsomes to target mitochondria for spatiotemporally controlled monitoring of ATP in the mitochondria of living cells. The photocleavable modification on the DNA ATP aptamer sensor can prevent sensor activation before reaching mitochondria and the sensor can then be activated upon light irradiation. The sensor has a detection limit of 3.7 μM and high selectivity against other nucleotides, allowing detection of ATP concentration fluctuations in mitochondria induced by Ca²⁺ or oligomycin. This work represents the first successful delivery of a DNA aptamer sensor to mitochondria, providing a new platform for targeted delivery to subcellular organelles for monitoring energy producing processes, as well as mitochondrial dysfunction-related diseases in different cells.

A photo-regulated ATP sensor coupled with cationic DQAsomes is developed for spatiotemporally controlled imaging of ATP in the mitochondria of living cells.

Perspective on the Future Role of Aptamers in Analytical Chemistry

It has been almost 30 years since the invention of Systematic Evolution of Ligands by Exponential Enrichment (SELEX) methodology and the description of the first aptamers. In retrospect over the past 30 years, advances in aptamer development and application have demonstrated that aptamers are potentially useful reagents that can be employed in diverse areas within analytical chemistry, biotechnology, biomedicine, and molecular biology. While often touted as artificial antibodies with an ability to be selected for any target, aptamer development, unfortunately, lags behind development of analytical methodologies that employ aptamers, hindering deeper integration into the application of analytical tool development. This perspective covers recent advances in SELEX methodology for improving efficiency of the SELEX procedure and enhancing affinity and specificity of the selected aptamers, what we view as a critical barrier in the future role of aptamers in analytical chemistry. We discuss postselection modifications that can be used for enhancing performance of the selected aptamers in an analytical device by including understanding intermolecular interaction forces in the binding domain. While highlighting promising properties of aptamers that enable several analytical advances, we provide discussion on the challenges of penetration of aptamers in the analytical field.

Dynamic Control of Peptide Strand Displacement Reaction Using Functional Biomolecular Domain for Biosensing

Nature's great repository provides nucleic acids and amino acids as the fundamental elements of life. Inspired by the programmability of nucleic acids, DNA nanotechnology has been extensively developed based on the strand displacement reaction of nucleic acids. In comparison with nucleic acids, amino acids possess higher programmability and more functionalities owing to the diversity of the amino acid unit. However, the design of the peptide-based bimolecular cascade is still limited. We herein describe a peptide-based strand displacement reaction, which was granted with a specific biological function by addition of a functional domain onto the coiled-coil peptide based displacement substrate. The displacement substrate was specifically designed to response to Tau protein based on a well-established Tau inhibition sequence. We demonstrated that the kinetics of the designed displacement reaction can be dynamically tuned through blocking the toehold region to prevent migration. A nanomolar Tau detection linear range was achieved through the designed displacement reaction within a rapid turnaround time of 30 min. We also presented the capability of the peptide strand displacement based sensing system operating in real human biological samples and its excellent orthogonality on response to irrelevant biological components. We envision that this will be of especially high utility for the development of next-generation biotechnology.

Ultrasensitive determination of thrombin by using an electrode modified with WSe2 and gold nanoparticles, aptamer-thrombin-aptamer sandwiching, redox cycling, and signal enhancement by alkaline phosphatase

A sensitive aptamer/protein binding-triggered sandwich assay for thrombin is described. It is based on electrochemical-chemical-chemical redox cycling using a glassy carbon electrode (GCE) that was modified with WSe₂ and gold nanoparticles (AuNPs). The AuNPs are linked to thrombin aptamer 1 via Au-S bonds. Thrombin is first captured by aptamer 1 and then sandwiched through the simultaneous interaction with AuNPs modified with thrombin-specific aptamer 2 and signalling probe. Subsequently, the DNA-linked AuNP hybrids result in the capture of streptavidin-conjugated alkaline phosphatase onto the modified GCE through the specific affinity reaction for further signal enhancement. As a result, a linear range of 0-1 ng mL^-1 and a detection limit as low as 190 fg mL^-1 are accomplished. The specificity for thrombin is excellent. Conceivably, this strategy can be easily expanded to other proteins by using the appropriate aptamer. Graphical abstract Schematic presentation of an electrochemical biosensor for thrombin based on WSe₂ and gold nanoparticles, aptamer-thrombin-aptamer sandwiching, redox cycling, and signal enhancement by alkaline phosphatase.

Supramolecularly Engineered Circular Bivalent Aptamer for Enhanced Functional Protein Delivery

Circular bivalent aptamers (cb-apt) comprise an emerging class of chemically engineered aptamers with substantially improved stability and molecular recognition ability. Its therapeutic application, however, is challenged by the lack of functional modules to control the interactions of cb-apt with therapeutics. We present the design of a β-cyclodextrin-modified cb-apt (cb-apt-βCD) and its supramolecular interaction with molecular therapeutics via host-guest chemistry for targeted intracellular delivery. The supramolecular ensemble exhibits high serum stability and enhanced intracellular delivery efficiency compared to a monomeric aptamer. The cb-apt-βCD ensemble delivers green fluorescent protein into targeted cells with efficiency as high as 80%, or cytotoxic saporin to efficiently inhibit tumor cell growth. The strategy of conjugating βCD to cb-apt, and subsequently modulating the supramolecular chemistry of cb-apt-βCD, provides a general platform to expand and diversify the function of aptamers, enabling new biological and therapeutic applications.

Electrochemical Aptamer-Based Sensors for Rapid Point-of-Use Monitoring of the Mycotoxin Ochratoxin A Directly in a Food Stream

The ability to measure the concentration of specific small molecules continuously and in real-time in complex sample streams would impact many areas of agriculture, food safety, and food production. Monitoring for mycotoxin taint in real time during food processing, for example, could improve public health. Towards this end, we describe here an inexpensive electrochemical DNA-based sensor that supports real-time monitor of the mycotoxin ochratoxin A in a flowing stream of foodstuffs.

Optochemical Control of Biological Processes in Cells and Animals

Biological processes are naturally regulated with high spatial and temporal control, as is perhaps most evident in metazoan embryogenesis. Chemical tools have been extensively utilized in cell and developmental biology to investigate cellular processes, and conditional control methods have expanded applications of these technologies toward resolving complex biological questions. Light represents an excellent external trigger since it can be controlled with very high spatial and temporal precision. To this end, several optically regulated tools have been developed and applied to living systems. In this review we discuss recent developments of optochemical tools, including small molecules, peptides, proteins, and nucleic acids that can be irreversibly or reversibly controlled through light irradiation, with a focus on applications in cells and animals.

Single Nanochannel-Aptamer-Based Biosensor for Ultrasensitive and Selective Cocaine Detection

Ultrasensitive and selective detection of molecules at nano or sub-nanomolar level is very important for many areas such as early diagnosis and drug testing. Herein, we report a high-sensitive cocaine sensor based on a single nanochannel coupled with DNA aptamers. The single nanochannel-aptamer-based biosensor can recognize cocaine molecules with an excellent sensitivity and good selectivity. A linear relationship between target cocaine concentration and output ionic current is obtained in a wide concentration range of cocaine from 1 nM to 10 μM. The cocaine sensor also shows a detection limit down to 1 nM. This study provides a new avenue to develop new nanochannel-aptamer-based biosensors for rapid and ultratrace detection of a variety of illicit drugs.

Nongenetic Reprogramming of the Ligand Specificity of Growth Factor Receptors by Bispecific DNA Aptamers

The reprogramming of receptor-ligand interactions affords an opportunity to direct cells to respond to user-defined external cues. Although this has often been achieved via the genetic engineering of receptors, an alternative, nongenetic approach is highly demanded. In this article, we propose the design of oligonucleotide-based synthetic switches that feature the ability to reprogram the ligand specificity of the growth factor receptor. We demonstrated that our synthetic switches induced growth factor signaling via the formation of the dynamic complex with specific external cues that would otherwise not induce the signaling. This chemical approach may be applied to designing a new class of chemical tools that can control the activities of native cells and represent smart and safer regenerative drugs.

Aptamer/Protein Proximity Binding-Triggered Molecular Machine for Amplified Electrochemical Sensing of Thrombin

The development of convenient and sensitive methods without involving any enzymes or complex nanomaterials for the monitoring of proteins is of great significance in disease diagnostics. In this work, we describe the validation of a new aptamer/protein proximity binding-triggered molecular machinery amplification strategy for sensitive electrochemical assay of thrombin in complex serum samples. The sensing interface is prepared by self-assembly of three-stranded DNA complexes on the gold electrode. The association of two distinct functional aptamers with different sites of thrombin triggers proximity binding-induced displacement of one of the short single-stranded DNAs (ssDNAs) from the surface-immobilized three-stranded DNA complexes, exposing a prelocked toehold domain to hybridize with a methylene blue (MB)-tagged fuel ssDNA strand (MB-DNA). Subsequent toehold-mediated strand displacement by the MB-DNA leads to the release and recycling of the aptamer/protein complexes and the function of the molecular machine. Eventually, a large number of MB-DNA strands are captured by the sensor surface, generating drastically amplified electrochemical responses from the MB tags for sensitive detection of thrombin. Our signal amplified sensor is completely enzyme-free and shows a dynamic range from 5 pM to 1 nM with a detection limit of 1.7 pM. Such sensor also has a high specificity for thrombin assay in serum samples. By changing the affinity probe pairs, the developed sensor can be readily expanded as a more general platform for sensitive detection of different types of proteins.

Nanomaterials-modified cellulose paper as a platform for biosensing applications

Recently, paper substrates have attracted tremendous interest from both academia and industry. Not only is paper highly abundant and portable, it is lightweight, disposable, easy-to-use, and can be rolled or folded into 3D configurations. More importantly, with a unique porous bulk structure and rough and absorptive surface properties, the construction of nanomaterials-functionalized cellulose has enabled cellulose paper to be applied for point-of-care (POC) paper devices with reasonably good performance at low cost. In this review, the latest advances in the modification of nanomaterials on paper cellulose are summed up. To begin with, the attractive properties of paper-based analytical devices are described. Then, fabricating methods for the functionalization of cellulose with diverse materials, including noble metals, bimetals, metal oxides, carbon nanomaterials, and molecular imprinting polymer nanoparticles, as well as their applications, are introduced in detail. Finally, the current critical issues, challenges, and future prospectives for exploring a paper-based analytical system based on nanomaterials-modified cellulose are discussed. It is believed that more strategies will be developed in the future to construct nanomaterials-functionalized cellulose, paving the way for the mass production of POC paper devices with a satisfactory performance.

Stimuli-Responsive Self-Assembled DNA Nanomaterials for Biomedical Applications

Stimuli-responsive DNA-based materials represent a major class of remarkable functional nanomaterials for nano-biotechnological applications. In this review, recent progress in the development of stimuli-responsive systems based on self-assembled DNA nanostructures is introduced and classified. Representative examples are presented in terms of their design, working principles and mechanisms to trigger the response of the stimuli-responsive DNA system upon expose to a large variety of stimuli including pH, metal ions, oligonucleotides, small molecules, enzymes, heat, and light. Substantial in vitro studies have clearly revealed the advantages of the use of stimuli-responsive DNA nanomaterials in different biomedical applications, particularly for biosensing, drug delivery, therapy and diagnostic purposes in addition to bio-computing. Some of the challenges faced and suggestions for further development are also highlighted.

Photocaged G-Quadruplex DNAzyme and Aptamer by Post-Synthetic Modification on Phosphodiester Backbone

G-quadruplex-containing DNAzymes and aptamers are widely applied in many research fields because of their high stability and prominent activities versus the protein counterparts. In this work, G-quadruplex DNAs were equipped with photolabile groups to construct photocaged DNAzymes and aptamers. We incorporated TEEP-OH (thioether-enol phosphate, phenol substituted) into phosphodiester backbone of G-quadruplex DNA by a facile post-synthetic method to achieve efficient photocaging of their activities. Upon light irradiation, the peroxidase-mimicking activity of the caged G-quadruplex DNAzyme was activated, through the transformation of TEEP-OH into a native DNA phosphodiester without any artificial scar. Similarly, the caged G-quadruplex thrombin-binding aptamer also showed light-induced activation of thrombin inhibition activity. This method could serve as a general strategy to prepare photocaged G-quadruplex DNA with other activities for noninvasive control of their functions.