Construction of Smart Supramolecular Polymeric Hydrogels Cross-linked by Discrete Organoplatinum(II) Metallacycles via Post-Assembly Polymerization

Gas-Controlled Self-Assembly of Metallacycle-Cored Supramolecular Star Polymer with Tunable Antibacterial Activity

Herein, a three-armed amphiphilic metallacycle-cored star supramolecular polymer (Por-MOM-PDMAEMA) has been designed and synthesized via highly efficient post-assembly polymerization. This star polymer is further self-assembled into nanoparticles of different sizes depending upon the experimental conditions. The gas-controlled morphology transformation and tunable antibacterial activities of Por-MOM-PDMAEMAis systematically investigated and compared with metallacycle (MOM). The superior antibacterial activity of Por-MOM-PDMAEMA against multidrug-resistant P. aeruginosa implies that the presence of photodynamic photosensitizer (Por) and cationic polymer chain will significantly enhance antibactericidal activity, which is mainly attributed to the synergistic effect of photosensitizer and polymer chain linked in one metallacycle core. By leveraging the unique properties of metallacycle and their dynamic response to gaseous stimuli, the antibacterial properties of the Por-MOM-PDMAEMA can be finely tuned in response to gas triggers.

Thermal-Sensitive Supramolecular Coordination Complex Formed by Orthogonal Metal Coordination and Host-Guest Interactions for an Electrical Thermometer

Supramolecular coordination complexes (SCCs) are popular for their structural diversity and functional adaptability, which make them suitable for a wide range of applications. Photophysical and mechanical performance of SCCs are the most attractive characteristics, yet their ionically conductive behavior and potential in electrical sensing have been rarely investigated. This study reports a well-designed SCC that integrates orthogonal metal coordination and host-guest interactions to achieve sensitive electrical thermal sensing. Owing to the thermodynamic nature of the host-guest interaction, the SCC encounters thermally induced disassembly, leading to significantly enhanced ion mobility and thus allowing for the precise detection of minor temperature variation. The SCC-based thermometer is then fabricated with the assistance of 3D printing and demonstrates good accuracy and reliability in monitoring human skin temperature and real-time temperature changes of mouse during the whole anesthesia and recovery process. Our findings provide an innovative strategy for developing electrical thermometers and expand the current application scope of SCCs in electrical sensing.

Supramolecular Synthesis of Star Polymers

Supramolecular polymers, in which monomers are assembled via intermolecular interactions, have been extensively studied. The fusion of supramolecular polymers with conventional polymers has attracted the attention of many researchers. In this review article, the recent progress in the construction of supramolecular star polymers, including regular star polymers and miktoarm star polymers, is discussed. The initial sections briefly provide an overview of the conventional classification and synthesis methods for star polymers. Coordination-driven self-assembly was investigated for the supramolecular synthesis of star polymers. Star polymers with multiple polymer chains radiating from metal-organic polyhedra (MOPs) have also been described. Particular focus has been placed on the synthesis of star polymers featuring supramolecular cores formed through hydrogen-bonding-directed self-assembly. After describing the synthesis of star polymers based on host-guest complexes, the construction of miktoarm star polymers based on the molecular recognition of coordination capsules is detailed.

Chemical and Photochemical-Driven Dissipative Fe3+/Fe2+-Ion Cross-Linked Carboxymethyl Cellulose Gels Operating Under Aerobic Conditions: Applications for Transient Controlled Release and Mechanical Actuation

A Fe3+-ion cross-linked carboxymethyl cellulose, Fe3+-CMC, redox-active gel exhibiting dissipative, transient stiffness properties is introduced. Chemical or photosensitized reduction of the higher-stiffness Fe3+-CMC to the lower-stiffness Fe2+-CMC gel, accompanied by the aerobic reoxidation of the Fe2+-CMC matrix, leads to the dissipative, transient stiffness, functional matrix. The light-induced, temporal, transient release of a load (Texas red dextran) and the light-triggered, transient mechanical bending of a poly-N-isopropylacrylamide (p-NIPAM)/Fe3+-CMC bilayer construct are introduced, thus demonstrating the potential use of the dissipative Fe3+-CMC gel for controlled drug release or soft robotic applications.

Post-Assembly Polymerization of Discrete Anion-Coordinated Triple Helicate

Hierarchical self-assembly has been recently employed in the construction of anion-coordination-driven gel materials. However, the post-assembly modification strategy, which may be a highly efficient strategy to realize the functionalization of discrete 'aniono' supramolecular architectures, has not been employed yet. Herein we report the first example of anion-coordination-driven gel material cross-linked by well-defined 'aniono' triple helicate through post-assembly polymerization. The obtained gel shows self-healing property and excellent compatibility with various surfaces, including glass, rubber, leaf, PP, and metal. The viscoelastic gel constructed through the post-assembly modification strategy enriches the method to construct the anion-coordination-driven smart materials.

Smart/stimuli-responsive chitosan/gelatin and other polymeric macromolecules natural hydrogels vs. synthetic hydrogels systems for brain tissue engineering: A state-of-the-art review

Currently, there are no viable curative treatments that can enhance the central nervous system's (CNS) recovery from trauma or illness. Bioengineered injectable smart/stimuli-responsive hydrogels (SSRHs) that mirror the intricacy of the CNS milieu and architecture have been suggested as a way to get around these restrictions in combination with medication and cell therapy. Additionally, the right biophysical and pharmacological stimuli are required to boost meaningful CNS regeneration. Recent research has focused heavily on developing SSRHs as cutting-edge delivery systems that can direct the regeneration of brain tissue. In the present article, we have discussed the pathology of brain injuries, and the applicable strategies employed to regenerate the brain tissues. Moreover, the most promising SSRHs for neural tissue engineering (TE) including alginate (Alg.), hyaluronic acid (HA), chitosan (CH), gelatin, and collagen are used in natural polymer-based hydrogels and thoroughly discussed in this review. The ability of these hydrogels to distribute bioactive substances or cells in response to internal and external stimuli is highlighted with particular attention. In addition, this article provides a summary of the most cutting-edge techniques for CNS recovery employing SSRHs for several neurodegenerative diseases.

Switchable metallacycles and metallacages

Two-dimensional metallacycles and three-dimensional metallacages constructed by coordination-driven self-assembly have attracted much attention because they exhibit unique structures and properties and are highly efficient to synthesize. Introduction of switching into supramolecular chemistry systems is a popular strategy, as switching can endow systems with reversible features that are triggered by different stimuli. Through this strategy, novel switchable metallacycles and metallacages were generated, which can be reversibly switched into different stable states with distinct characteristics by external stimuli. Switchable metallacycles and metallacages exhibit versatile structures and reversible properties and are inherently dynamic and respond to artificial signals; thus, these structures have many promising applications in a wide range of fields, such as drug delivery, data processing, pollutant removal, switchable catalysis, smart functional materials, etc. This review focuses on the design of switchable metallacycles and metallacages, their switching behaviours and mechanisms triggered by external stimuli, and the corresponding structural changes and resultant properties and functions.

Metal Organic Polygons and Polyhedra: Instabilities and Remedies

The field of coordination chemistry has undergone rapid transformation from preparation of monometallic complexes to multimetallic complexes. So far numerous multimetallic coordination complexes have been synthesized. Multimetallic coordination complexes with well-defined architectures are often called as metal organic polygons and polyhedra (MOPs). In recent past, MOPs have received tremendous attention due to their potential applicability in various emerging fields. However, the field of coordination chemistry of MOPs often suffer set back due to the instability of coordination complexes particularly in aqueous environment-mostly by aqueous solvent and atmospheric moisture. Accordingly, the fate of the field does not rely only on the water solubilities of newly synthesized MOPs but very much dependent on their stabilities both in solution and solid state. The present review discusses several methodologies to prepare MOPs and investigates their stabilities under various circumstances. Considering the potential applicability of MOPs in sustainable way, several methodologies (remedies) to enhance the stabilities of MOPs are discussed here.

Full-Color-Tunable Nanohydrogels as High-Stability Intracellular Nanothermometers

Full-color-tunable hydrogels with ultrahigh stability can be used in various fields, including intracellular temperature sensing. However, constructing full-color-tunable organic nanohydrogels with excellent biocompatibility and stability for intracellular temperature sensing remains a great challenge. Here, we report a full-color-tunable nanohydrogel with ultrahigh stability as an intracellular nanothermometer. Three types of temperature-sensitive polymers with red, green, and blue fluorescence were synthesized. Through easy mixing of these three polymers with regulation of the mass ratio, these polymers can be encoded to full-color-tunable fluorescent nanohydrogels, including nanohydrogels with white-light emission (NWLEs), with sizes of about 200 nm in aqueous media. Further study suggested that the as-obtained NWLEs exhibited good performance in intracellular temperature sensing because of their ultrahigh stability on their fluorescence properties and morphologies.

Non-equilibrium Nanoassemblies Constructed by Confined Coordination on a Polymer Chain

Biological systems employ non-equilibrium self-assembly to create ordered nanoarchitectures with sophisticated functions. However, it is challenging to construct artificial non-equilibrium nanoassemblies due to lack of control over assembly dynamics and kinetics. Herein, we design a series of linear polymers with different side groups for further coordination-driven self-assembly based on shape-complementarity. Such a design introduces a main-chain confinement which effectively slows down the assembly process of side groups, thus allowing us to monitor the real-time evolution of lychee-like nanostructures. The function related to the non-equilibrium nature is further explored by performing photothermal conversion study. The ability to observe and capture non-equilibrium states in this supramolecular system will enhance our understanding of the thermodynamic and kinetic features as well as functions of living systems.

Electroactive Polymer-Based Spray Ionization for Direct Mass Spectrometric Analysis

Electrochemically deposited electroactive polymer (EAP) films were investigated for their potential to enhance the performance of ambient ionization mass spectrometry (MS). Several EAPs of varying hydrophobicity were evaluated, including the superhydrophobic polymer poly[3,4-(2-dodecylethylenedioxy)thiophene] (PEDOT-C₁₂). The EAPs were electropolymerized onto indium tin oxide-coated glass, placed in front of the inlet of a mass spectrometer, and charged to 3.5-4.5 kV. Analyte solutions were then applied to the surface, initiating ionization events. Analytes including peptides and small molecule pharmaceuticals were studied in 0.1% formic acid in methanol/water ("spray solvent") as well as in synthetic biological fluid matrices, using both EAP spray ionization (EAPSI) and paper spray ionization (PSI). Each EAPSI analysis required as little as 0.1 μL of solution, and the resulting sprays were stable and reproducible. The sensitivity, limit of detection (LOD), and limit of quantification (LOQ) were evaluated using bradykinin, cannabinol, and cannabidiol, which were prepared in pure solvents, artificial urine, and artificial saliva. The limits of detection and quantitation for EAPSI were improved relative to PSI by 1-2 orders of magnitude for analytes prepared in methanol/water and on the same order of magnitude as PSI for analytes prepared in artificial saliva and urine. This EAP-based spray ionization technique offers possibilities for rapid MS analysis with small sample sizes, high accuracy, and miniaturization of MS instruments.

Metallacycle-cored fluorescent supramolecular polymer networks for the detection of acidic environments

Despite the challenges, supramolecular polymers (SPs) have received significant attention. In this study, pH-responsive fluorescent SPs were prepared by a bottom-up strategy. The rhombohedral metallacycle-cored supramolecular coordination complex (SCC) was first prepared by metal-ligand coordination between the 120° pyridinedione boron difluoride and the 60° crown ether-based platinum, which then interacted with ammonium salt-containing covalent polymers to form SP networks. These networks can potentially be used for the detection of organic acid solutions and inorganic acid vapours.

Molecular Cavity for Catalysis and Formation of Metal Nanoparticles for Use in Catalysis

The employment of weak intermolecular interactions in supramolecular chemistry offers an alternative approach to project artificial chemical environments like the active sites of enzymes. Discrete molecular architectures with defined shapes and geometries have become a revolutionary field of research in recent years because of their intrinsic porosity and ease of synthesis using dynamic non-covalent/covalent interactions. Several porous molecular cages have been constructed from simple building blocks by self-assembly, which undergoes many self-correction processes to form the final architecture. These supramolecular systems have been developed to demonstrate numerous applications, such as guest stabilization, drug delivery, catalysis, smart materials, and many other related fields. In this respect, catalysis in confined nanospaces using such supramolecular cages has seen significant growth over the years. These porous discrete cages contain suitable apertures for easy intake of substrates and smooth release of products to exhibit exceptional catalytic efficacy. This review highlights recent advancements in catalytic activity influenced by the nanocavities of hydrogen-bonded cages, metal-ligand coordination cages, and dynamic or reversible covalently bonded organic cages in different solvent media. Synthetic strategies for these three types of supramolecular systems are discussed briefly and follow similar and simplistic approaches manifested by simple starting materials and benign conditions. These examples demonstrate the progress of various functionalized molecular cages for specific chemical transformations in aqueous and nonaqueous media. Finally, we discuss the enduring challenges related to porous cage compounds that need to be overcome for further developments in this field of work.

Photoresponsive DNA materials and their applications

Photoresponsive nucleic acids attract growing interest as functional constituents in materials science. Integration of photoisomerizable units into DNA strands provides an ideal handle for the reversible reconfiguration of nucleic acid architectures by light irradiation, triggering changes in the chemical and structural properties of the nanostructures that can be exploited in the development of photoresponsive functional devices such as machines, origami structures and ion channels, as well as environmentally adaptable 'smart' materials including nanoparticle aggregates and hydrogels. Moreover, photoresponsive DNA components allow control over the composition of dynamic supramolecular ensembles that mimic native networks. Beyond this, the modification of nucleic acids with photosensitizer functionality enables these biopolymers to act as scaffolds for spatial organization of electron transfer reactions mimicking natural photosynthesis. This review provides a comprehensive overview of these exciting developments in the design of photoresponsive DNA materials, and showcases a range of applications in catalysis, sensing and drug delivery/release. The key challenges facing the development of the field in the coming years are addressed, and exciting emergent research directions are identified.

An amphiphilic water-soluble biphen[3]arene with a tunable lower critical solution temperature behavior

The first amphiphilic water-soluble thermoresponsive biphen[3]arene with a tunable lower critical solution temperature behavior is reported.

Cross-Linked Supramolecular Polymer Networks Constructed by Pillar[5]arene-Based Host–Guest Recognition and Coordination/Oxidation of Catechol

In this work, two cross-linked supramolecular polymers are prepared by pillar[5]arene-based molecular recognition and coordination/oxidation of catechol. In addition, two supramolecular glues are obtained at high concentrations of the cross-linked...

Water compatible supramolecular polymers: recent progress

Water compatible supramolecular polymers (WCSPs) combine aqueous compatibility with the reversibility and environmental responsiveness of supramolecular polymers. WCSPs have seen application across a number of fields, including stimuli-responsive materials, healable materials, and drug delivery, and are attracting increasing attention from the design, synthesis, and materials perspectives. In this review, we summarize the chemistry of WCSPs from 2016 to mid-2021. For the sake of discussion, we divide WCSPs into five categories based on the core supramolecular approaches at play, namely hydrogen-bonding arrays, electrostatic interactions, large π-conjugated subunits, host-guest interactions, and peptide-based systems, respectively. We discuss both synthesis and polymer structure, as well as the underlying design expectations. The goal of this overview is to deepen our understanding of the strategies that have been exploited to prepare WCSPs, as well as their properties and uses. Thus, a section devoted to potential applications is included in this review.

Understanding of supramolecular emulsion interfacial polymerization in silico

The composition and structure of a membrane determine its functionality and practical application. We study the supramolecular polymeric membrane prepared by supramolecular emulsion interfacial polymerization (SEIP) on the oil-in-water droplet via the computer simulation method. The factors that may influence its structure and properties are investigated, such as the degree of polymerization and molecular weight distribution (MWD) of products in the polymeric membranes. We find that the SEIP can lead to a higher total degree of polymerization as compared to the supramolecular interfacial polymerization (SIP). However, the average chain length of products in the SEIP is lower than that of the SIP due to its obvious interface curvature. The stoichiometric ratio of reactants in two phases will affect the MWD of the products, which further affects the performance of the membranes in practical applications, such as drug release rate and permeability. Besides, the MWD of the product by SEIP obviously deviates from the Flory distribution as a consequence of the curvature of reaction interface. In addition, we obtain the MWD for the emulsions whose size distribution conforms to the Gaussian distribution so that the MWD may be predicted according to the corresponding emulsion size distribution. This study helps us to better understand the controlling factors that may affect the structure and properties of supramolecular polymeric membranes by SEIP.

When polymerization meets coordination-driven self-assembly: metallo-supramolecular polymers based on supramolecular coordination complexes

Polymers have greatly changed and are still changing the way we live ever since, and the construction of novel polymers as functional materials remains an attractive topic in polymer science and related areas. During the past few years, the marriage of discrete supramolecular coordination complexes (SCCs), including two-dimensional (2D) metallacycles and three-dimensional (3D) metallacages, and polymers gave rise to two novel types of metallo-supramolecular polymers, i.e., metallacycle/metallacage-cored star polymers (MSPs) and metallacycle/metallacage-crosslinked polymer networks (MPNs), which has attracted increasing attention and emerged as an exciting new research direction in polymer chemistry. Attributed to their well-defined and diverse topological architectures as well as the unique dynamic features of metallacycles/metallacages as cores or crosslinks, these novel polymers have shown extensive applications. In this review, aiming at providing a practical guide to this emerging area, the introduction of synthetic strategies towards MSPs and MPNs will be presented. In addition, their wide applications in areas such as functional materials, molecular sieving, drug delivery, bacterial killing and bioimaging are also discussed.

Novel self-healing and multi-stimuli-responsive supramolecular gel based on d-sorbitol diacetal for multifunctional applications

A simple-structured super gelator with self-healability and multi-stimuli responses was reported herein, which exhibited multiple visual molecular recognition abilities. Multifunctional applications such as effective lubricants, safe fuels, high-efficient propellants, dyes adsorbents, enhanced fluorescence emission and separation of aldehydes from aqueous solutions are integrated into a single organogelator, which was rarely reported.

A simple-structured super gelator with self-healability and multi-stimuli responses was reported herein, which exhibited multiple visual molecular recognition abilities.

A multi-responsive supramolecular heparin-based biohybrid metallogel constructed by controlled self-assembly based on metal–ligand, host–guest and electrostatic interactions

A new family of supramolecular heparin-based biohybrid metallogels with multiple stimuli-responsive behaviours was constructed through the controlled self-assembly based on three orthogonal interactions within a single system.

A supramolecular dual-donor artificial light-harvesting system with efficient visible light-harvesting capacity

A supramolecular dual-donor artificial light-harvesting system with efficient visible light-harvesting capacity was constructed through the hierarchical self-assembly approach.

Nanosheets and Hydrogels Formed by 2 nm Metal-Organic Cages with Electrostatic Interaction

We report the mechanism of hydrogel formation in dilute aqueous solutions (>15 mg/mL) by 2 nm metal-organic cages (MOCs). Experiments and all-atom simulations confirm that with the addition of small electrolytes, the MOCs self-assemble into 2D nanosheets via counterion-mediated attraction because of their unique molecular structure and charge distribution as well as σ-π interactions. The stiff nanosheets are difficult to bend into 3-D hollow, spherical blackberry type structures, as observed in many other macroion systems. Instead, they stay in solution and their very large excluded volumes lead to gelation at low (∼1.5 wt %) MOC concentrations, with additional help from hydrophobic and partial π-π interactions similar to the gelation of graphene oxides.

Supramolecular Polymers With AIE Property Fabricated From a Cyanostilbene Motif-Derived Ditopic Benzo-21-Crown-7 and a Ditopic Dialkylammonium Salt

Fluorescent supramolecular polymers (FSP) have attracted considerable attention in recent years. Particularly, the incorporation of aggregation-induced emission (AIE) property to the FSP will bring this material into practical applications. Herein, we designed and synthesized a cyanostilbene motif derived ditopic benzo-21-crown-7 (B21C7) as a host molecule (H). The cyanostilbene motif endows H with AIE property while the B21C7 motif renders it with the capability to complex with electron deficient guest molecules. Upon the addition of a ditopic dialkylammonium salt molecule (G), a novel FSP with blue luminescent property can be constructed. This B21C7-based host-guest FSP with blue fluorescence may have potential application in supramolecular luminescent materials.

Covalent Post-Assembly Modification: A Synthetic Multipurpose Tool in Supramolecular Chemistry

The use of covalent post-assembly modification (PAM) in supramolecular chemistry has grown significantly in recent years, to the point where PAM is now a versatile synthesis tool for tuning, modulating, and expanding the functionality of self-assembled complexes and materials. PAM underpins supramolecular template-synthesis strategies, enables modular derivatization of supramolecular assemblies, permits the covalent 'locking' of unstable structures, and can trigger controlled structural transformations between different assembled morphologies. This Review discusses key examples of PAM spanning a range of material classes, including discrete supramolecular complexes, self-assembled soft nanostructures and hierarchically ordered polymeric and framework materials. As such, we hope to highlight how PAM has continued to evolve as a creative and functional addition to the synthetic chemist's toolbox for constructing bespoke self-assembled complexes and materials.

High-Strength and High-Toughness Silk Fibroin Hydrogels: A Strategy Using Dynamic Host-Guest Interactions

Natural polymer-based hydrogels attract great attention because of their inherent biocompatibility and controllable biodegradability. However, the broad applications of these hydrogels require a combination of high mechanical strength, high toughness, fatigue resistance, as well as self-healing. The integration of this combination into one natural polymer-based hydrogel remains challenging. Here, a molecular design strategy was proposed to fabricate mechanically robust silk fibroin-based hydrogels using host-guest interactions. Silk fibroin molecules was chemically modified with cholesterol (Chol, guest) or β-cyclodextrin (β-CD, host), and host-guest interaction between Chol and β-CD moieties drove the supramolecular assemblies of hydrogels. The dissociation/reassociation behavior of host-guest complexation, serving as sacrificial bonds, endowed hydrogels with effective energy dissipation and rapid self-healing ability. The prepared silk fibroin-based hydrogels exhibited high mechanical strength, high toughness, and remarkable fatigue resistance, superior to conventional silk fibroin hydrogels. Moreover, due to reversible host-guest interactions, hydrogels achieved facile functional recovery after damage without any external stimuli. This design strategy provides an avenue to develop natural polymer-based materials with robust mechanical properties, thus broadening current hydrogel applications.

Stimuli-Responsive Biomolecule-Based Hydrogels and Their Applications

This Review presents polysaccharides, oligosaccharides, nucleic acids, peptides, and proteins as functional stimuli-responsive polymer scaffolds that yield hydrogels with controlled stiffness. Different physical or chemical triggers can be used to structurally reconfigure the crosslinking units and control the stiffness of the hydrogels. The integration of stimuli-responsive supramolecular complexes and stimuli-responsive biomolecular units as crosslinkers leads to hybrid hydrogels undergoing reversible triggered transitions across different stiffness states. Different applications of stimuli-responsive biomolecule-based hydrogels are discussed. The assembly of stimuli-responsive biomolecule-based hydrogel films on surfaces and their applications are discussed. The coating of drug-loaded nanoparticles with stimuli-responsive hydrogels for controlled drug release is also presented.

Soft Actuated Hybrid Hydrogel with Bioinspired Complexity to Control Mechanical Flexure Behavior for Tissue Engineering

Hydrogels exhibit excellent properties that enable them as nanostructured scaffolds for soft tissue engineering. However, single-component hydrogels have significant limitations due to the low versatility of the single component. To achieve this goal, we have designed and characterized different multi-component hydrogels composed of gelatin, alginate, hydroxyapatite, and a protein (BSA and fibrinogen). First, we describe the surface morphology of the samples and the main characteristics of the physiological interplay by using fourier transform infrared (FT-IR), and confocal Raman microscopy. Then, their degradation and swelling were studied and mechanical properties were determined by rheology measurements. Experimental data were carefully collected and quantitatively analyzed by developing specific approaches and different theoretical models to determining the most important parameters. Finally, we determine how the nanoscale of the system influences its macroscopic properties and characterize the extent to which degree each component maintains its own functionality, demonstrating that with the optimal components, in the right proportion, multifunctional hydrogels can be developed.

Recent developments in the construction and applications of platinum-based metallacycles and metallacages via coordination

Coordination-driven suprastructures have attracted much interest due to their unique properties. Among these structures, platinum-based architectures have been broadly studied due to their facile preparation. The resultant two- or three-dimensional (2D or 3D) systems have many advantages over their precursors, such as improved emission tuning, sensitivity as sensors, and capture and release of guests, and they have been applied in biomedical diagnosis as well as in catalysis. Herein, we review the recent results related to platinum-based coordination-driven self-assembly (CDSA), and the text is organized to emphasizes both the synthesis of new metallacycles and metallacages and their various applications.

Emissive Metallacycle-Crosslinked Supramolecular Networks with Tunable Crosslinking Densities for Bacterial Imaging and Killing

The chemical structures and topologies of the crosslinks in supramolecular networks play a crucial role in their properties and functions. Herein, the preparation of a type of poly(N-isopropylacrylamide) (PNIPAAM)-based supramolecular networks crosslinked by emissive hexagonal metallacycles is presented. The topological connections in these networks greatly affect their properties, as evidenced by their differences in absorption, emission, lower critical solution temperature, and modulus along with the variation of crosslinking densities. The integration of PNIPAAM and metallacycles in the networks benefits them improved bioavailability, making them serve as reagents for bacterial imaging and killing. This study provides a strategy to prepare cavity-crosslinked polymer networks for antibacterial applications.

Photo- and Thermosensitive Polymer Membrane with a Tunable Microstructure Doped with Graphene Oxide Nanosheets and Poly(N-isopropylacrylamide) for the Application of Light-Cleaning

Traditional polymer membranes exhibit a constant structure that makes adjustment of the filtration process difficult, such as flux changing and contaminant cleaning. Inspired by the automatically closing behavior of leaf stomata under strong light, we prepared a membrane with thermo- and photosensitivities, whose microstructure, as well as filtration properties, could be controlled by adjusting the light condition. The membrane was fabricated by the immersion phase inversion method with a casting solution of polyvinylidene fluoride-g-poly(N-isopropylacrylamide) (PVDF-g-PNIPAAm) and graphene oxide (GO) nanosheets. Additionally, the membrane could be heated to a high temperature in a short time under illumination, causing shrinkage of its PNIPAAm chains and expansion of its membrane pores. On the basis of the reversible photoinduced structural transformation, the membrane exhibited a high water gating ratio under the switching of light on/off. Moreover, we proposed a novel and simple method to clear the contaminant from the pores of the membrane via light, which we named "light-cleaning". Light-cleaning had a flux recovery rate of 99.2%, substantially higher than that of back-washing (62%). This work not only extends the controllability and functionality of the polymer membrane but also develops a new membrane cleaning system.

Construction of Supramolecular Liquid-Crystalline Metallacycles for Holographic Storage of Colored Images

Design and construction of new functionalized supramolecular coordination complexes (SCCs) via coordination-driven self-assembly strategy is highly important in supramolecular chemistry and materials science. Herein, we present a family of well-defined metallacycles decorated with mesogenic forklike dendrons through the strategy of coordination-driven self-assembly. Due to the existence of mesogenic forklike dendrons, the obtained metallacycles displayed the smectic A liquid crystal phase at room temperature while their precursors exhibited the rectangular columnar liquid crystal phase. Interestingly, by taking advantage of the electrostatic interactions between the positively charged metallacycle and the negatively charged heparin, the doping of heparin induced a significant change of the liquid-crystalline behaviors of metallacycles. More importantly, the prepared liquid-crystalline metallacycles could be further applied for holographic storage of colored images. Notably, the rhomboidal metallacycle and hexagonal metallacycle gave rise to different holographic performances although they featured a similar liquid crystal phase behavior. Therefore, this research not only provides the first successful example of supramolecular liquid-crystalline metallacycles for holographic storage of colored images but also opens a new door for supramolecular liquid-crystalline metallacycles toward advanced optical applications.

Self-Assembly of Porphyrin-Containing Metalla-Assemblies and Cancer Photodynamic Therapy

In this report, we describe the synthesis of two porphyrin-containing Pt(II) supramolecular assemblies via coordination-driven self-assembly. X-ray crystallographic analysis on one assembly reveals that the metalla-assembly formation imposes large interchromophore distances, leading to a higher ¹O₂ generation efficiency, relative to the corresponding small molecular precursors. The metalla-assemblies were examined as photosensitizers for photodynamic therapy as the potential reduction of the unfavorable self-aggregation phenomenon. In vivo and in vitro investigations demonstrate that the metalla-assemblies exhibit enhanced anticancer activity with minimal dose requirement and side effects comparable to the small molecule precursors. Thus, our work demonstrates that self-assembly provides a promising methodology for enhancing the therapeutic effectiveness of anticancer agents.

Preparation of injectable hydrogel with near-infrared light response and photo-controlled drug release

Photo-controlled release hydrogel provides a new strategy for treating tumours. Under the stimulation of external light sources, the ability to release the entrapped drug on time and space on demand has outstanding advantages in improving drug utilisation, optimising treatment, and reducing toxicity and side effects. In this study, a photo-controlled drug delivery system for disulphide cross-linked polyaspartic acid (PASP-SS) hydrogels encapsulating proteinase K (ProK) adsorbed with platinum nanoparticles (PtNPs) was designed. The injectable cysteamine-modified polyaspartic acid (PASP-SH) sol and PtNPs adsorbed by ProK (ProK-PtNPs) as regulatory factors were prepared. Then, ProK-PtNPs and lentinan were dissolved in the sol, and the oxidant was added to the matrix to form the gel in situ quickly after injection. Finally, the degradation of PASP-SS hydrogel by ProK and the controllability of drug release under near-infrared (NIR) light irradiation were elucidated. In vitro degradation of hydrogels and drug release experiments showed that the degradation rate of PASP-SS hydrogel significantly increased and the drug release rate increased significantly under near-infrared radiation. The results of cytotoxicity test showed that PASP-SS, ProK-PtNPs, and lentinan all had more than 90% cell survival rate on NIH3T3, and the lentinan released from the carrier obviously inhibited the proliferation of MCF7. PASP hydrogel has the potential to respond to on-demand light control.