In Situ Doping Strategy for the Preparation of Conjugated Triazine Frameworks Displaying Efficient CO2 Capture Performance

Constructing an Asymmetric Covalent Triazine Framework to Boost the Efficiency and Selectivity of Visible-Light-Driven CO2 Photoreduction

The photocatalytic reduction of CO2 represents an environmentally friendly and sustainable approach for generating valuable chemicals. In this study, a thiophene-modified highly conjugated asymmetric covalent triazine framework (As-CTF-S) is developed for this purpose. Significantly, single-component intramolecular energy transfer can enhance the photogenerated charge separation, leading to the efficient conversion of CO2 to CO during photocatalysis. As a result, without the need for additional photosensitizers or organic sacrificial agents, As-CTF-S demonstrates the highest photocatalytic ability of 353.2 µmol g-1 and achieves a selectivity of ≈99.95% within a 4 h period under visible light irradiation. This study provides molecular insights into the rational control of charge transfer pathways for high-efficiency CO2 photoreduction using single-component organic semiconductor catalysts.

Strategies for Enhancing the Photocatalytic and Electrocatalytic Efficiency of Covalent Triazine Frameworks for CO2 Reduction

Converting carbon dioxide (CO2) into fuel and high-value-added chemicals is considered a green and effective way to solve global energy and environmental problems. Covalent triazine frameworks (CTFs) are extensively utilized as an emerging catalyst for photo/electrocatalytic CO2 reduction reaction (CO2RR) recently recognized for their distinctive qualities, including excellent thermal and chemical stability, π-conjugated structure, rich nitrogen content, and a strong affinity for CO2, etc. Nevertheless, single-component CTFs have the problems of accelerated recombination of photoexcited electron-hole pairs and restricted conductivity, which limit their application for photo/electrocatalytic CO2RR. Therefore, emphasis will then summarize the strategies for enhancing the photocatalytic and electrocatalytic efficiency of CTFs for CO2RR in this paper, including atom doping, constructing a heterojunction structure, etc. This review first illustrates the synthesis strategies of CTFs and the advantages of CTFs in the field of photo/electrocatalytic CO2RR. Subsequently, the mechanism of CTF-based materials in photo/electrocatalytic CO2RR is described. Lastly, the challenges and future prospects of CTFs in photo/electrocatalytic CO2RR are addressed, which offers a fresh perspective for the future development of CTFs in photo/electrocatalytic CO2RR.

Reticular framework materials for photocatalytic organic reactions

Photocatalytic organic reactions, harvesting solar energy to produce high value-added organic chemicals, have attracted increasing attention as a sustainable approach to address the global energy crisis and environmental issues. Reticular framework materials, including metal-organic frameworks (MOFs) and covalent organic frameworks (COFs), are widely considered as promising candidates for photocatalysis owing to their high crystallinity, tailorable pore environment and extensive structural diversity. Although the design and synthesis of MOFs and COFs have been intensively developed in the last 20 years, their applications in photocatalytic organic transformations are still in the preliminary stage, making their systematic summary necessary. Thus, this review aims to provide a comprehensive understanding and useful guidelines for the exploration of suitable MOF and COF photocatalysts towards appropriate photocatalytic organic reactions. The commonly used reactions are categorized to facilitate the identification of suitable reaction types. From a practical viewpoint, the fundamentals of experimental design, including active species, performance evaluation and external reaction conditions, are discussed in detail for easy experimentation. Furthermore, the latest advances in photocatalytic organic reactions of MOFs and COFs, including their composites, are comprehensively summarized according to the actual active sites, together with the discussion of their structure-property relationship. We believe that this study will be helpful for researchers to design novel reticular framework photocatalysts for various organic synthetic applications.

Porous organic polymers (POPs) for environmental remediation

Modern global industrialization along with the ever-increasing growth of the population has resulted in continuous enhancement in the discharge and accumulation of various toxic and hazardous chemicals in the environment. These harmful pollutants, including toxic gases, inorganic heavy metal ions, anthropogenic waste, persistent organic pollutants, toxic dyes, pharmaceuticals, volatile organic compounds, etc., are destroying the ecological balance of the environment. Therefore, systematic monitoring and effective remediation of these toxic pollutants either by adsorptive removal or by catalytic degradation are of great significance. From this viewpoint, porous organic polymers (POPs), being two- or three-dimensional polymeric materials, constructed from small organic molecules connected with rigid covalent bonds have come forth as a promising platform toward various leading applications, especially for efficient environmental remediation. Their unique chemical and structural features including high stability, tunable pore functionalization, and large surface area have boosted the transformation of POPs into various macro-physical forms such as thick and thin-film membranes, which led to a new direction in advanced level pollutant removal, separation and catalytic degradation. In this review, our focus is to highlight the recent progress and achievements in the strategic design, synthesis, architectural-engineering and applications of POPs and their composite materials toward environmental remediation. Several strategies to improve the adsorption efficiency and catalytic degradation performance along with the in-depth interaction mechanism of POP-based materials have been systematically summarized. In addition, evolution of POPs from regular powder form application to rapid and more efficient size and chemo-selective, "real-time" applicable membrane-based application has been further highlighted. Finally, we put forward our perspective on the challenges and opportunities of these materials toward real-world implementation and future prospects in next generation remediation technology.

Porous organic polymers for CO2 capture, separation and conversion

Porous organic polymers (POPs) have long been considered as prime candidates for carbon dioxide (CO2) capture, separation, and conversion. Especially their permanent porosity, structural tunability, stability and relatively low cost are key factors in such considerations. Whereas heteratom-rich microporous networks as well as their amine impregnation/functionalization have been actively exploited to boost the CO2 affinity of POPs, recently, the focus has shifted to engineering the pore environment, resulting in a new generation of highly microporous POPs rich in heteroatoms and featuring abundant catalytic sites for the capture and conversion of CO2 into value-added products. In this review, we aim to provide key insights into structure-property relationships governing the separation, capture and conversion of CO2 using POPs and highlight recent advances in the field.

Increased CO2 Affinity and Adsorption Selectivity in MOF-801 Fluorinated Analogues

The novel Zr^IV-based perfluorinated metal-organic framework (PF-MOF) [Zr₆O₄(OH)₄(TFS)₆] (ZrTFS) was prepared under solvent-free conditions using the commercially available tetrafluorosuccinic acid (H₂TFS) as a bridging ditopic linker. Since H₂TFS can be seen as the fully aliphatic and perfluorinated C₄ analogue of fumaric acid, ZrTFS was found to be isoreticular to zirconium fumarate (MOF-801). The structure of ZrTFS was solved and refined from X-ray powder diffraction data. Despite this analogy, the gas adsorption capacity of ZrTFS is much lower than that of MOF-801; in the former, the presence of bulky fluorine atoms causes a considerable window size reduction. To have PF-MOFs with more accessible porosity, postsynthetic exchange (PSE) reactions on (defective) MOF-801 suspended in H₂TFS aqueous solutions were carried out. Despite the different H₂TFS concentrations used in the PSE process, the exchanges yielded two mixed-linker materials of similar minimal formulae [Zr₆O₄(μ₃-OH)₄(μ₁-OH)_2.08(H₂O)_2.08(FUM)_4.04(HTFS)_1.84] (PF-MOF1) and [Zr₆O₄(μ₃-OH)₄(μ₁-OH)_1.83(H₂O)_1.83(FUM)_4.04(HTFS)_2.09] (PF-MOF2) (FUM^2- = fumarate), where the perfluorinated linker was found to fully replace the capping acetate in the defective sites of pristine MOF-801. CO₂ and N₂ adsorption isotherms collected on all samples reveal that both CO₂ thermodynamic affinity (isosteric heat of adsorption at zero coverage, Q_st) and CO₂/N₂ adsorption selectivity increase with the amount of incorporated TFS^2-, reaching the maximum values of 30 kJ mol^-1 and 41 (IAST), respectively, in PF-MOF2. This confirms the beneficial effect coming from the introduction of fluorinated linkers in MOFs on their CO₂ adsorption ability. Finally, solid-state density functional theory calculations were carried out to cast light on the structural features and on the thermodynamics of CO₂ adsorption in MOF-801 and ZrTFS. Due to the difficulties in modeling a defective MOF, an intermediate structure containing both linkers in the framework was also designed. In this structure, the preferential CO₂ adsorption site is the tetrahedral pore in the "UiO-66-like" structure. The extra energy stabilization stems from a hydrogen bond interaction between CO₂ and a hydroxyl group on the inorganic cluster.

Facile synthesis of a triazine-based porous organic polymer containing thiophene units for effective loading and releasing of temozolomide

Suzuki cross-coupling reaction was employed to easily obtain a triazine-based porous organic polymer (2,4,6-tris(5-bromothiophene-2-yl)-1,3,5-triazine [TBrTh]–1,3,5-benzene-triyltriboronic acid pinacol ester [BTBPE]–covalent triazine framework [CTF]) containing thiophene units. The chemical structure of TBrTh–BTBPE–CTF was revealed by solid-state 13C NMR, Fourier-transform infrared, and X-ray photoelectron spectroscopy. TBrTh–BTBPE–CTF with an amorphous structure exhibited excellent thermal stability and intrinsic porosity (373 m2·g−1 of Brunauer–Emmett–Teller surface area). Consequently, temozolomide (TMZ) was used as an oral alkylating agent in melanoma treatment to explore the drug loading and releasing behavior of TBrTh–BTBPE–CTF as a result of the low cytotoxicity of thiophene-based polymers. The successful loading of TMZ within the polymeric structure was suggested by thermogravimetric analysis and N2 sorption isotherms. The release experiments were performed in phosphate-buffered saline at pH values of 5.5 and 7.4, exhibiting good controlled-release properties. These results suggest that the current porous organic polymer is expected to be a drug carrier for the delivery and release of TMZ.

Nitrogen Atom-Doped Layered Graphene for High-Performance CO2/N2 Adsorption and Separation

The development of high-performance CO2 capture and separation adsorbents is critical to alleviate the deteriorating environmental issues. Herein, N atom-doped layered graphene (N-MGN) was introduced to form triazine and pyridine as potential CO2 capture and separation adsorbents via regulation of interlayer spacings. Structural analyses showed that accessible surface area of the N-MGN is 2521.72 m2 g−1, the porosity increased from 9.43% to 84.86%. At ultra-low pressure, N-MGN_6.8 have exhibited a high CO2 adsorption capacity of 10.59 mmol/g at 298 K and 0.4 bar. At high pressure, the absolute adsorption capacities of CO2 in N-MGN_17.0 (40.16 mmol g−1) at 7.0 MPa and 298 K are much larger than that of N-doping slit pore. At 298 K and 1.0 bar, the highest selectivity of CO2 over N2 reached up to ~133 in N-MGN_6.8. The research shows that N doping can effectively improve the adsorption and separation capacity of CO2 and N2 in layered graphene, and the interlayer spacing has an important influence on the adsorption capacity of CO2/N2. The adsorption heat and relative concentration curves further confirmed that the layered graphene with an interlayer spacing of 6.8 Å has the best adsorption and separation ability of CO2 and N2 under low pressure. Under high pressure, the layered graphene with the interlayer spacing of 17.0 Å has the best adsorption and separation ability of CO2 and N2.

Installation of synergistic binding sites onto porous organic polymers for efficient removal of perfluorooctanoic acid

Herein, we report a strategy to construct highly efficient perfluorooctanoic acid (PFOA) adsorbents by installing synergistic electrostatic/hydrophobic sites onto porous organic polymers (POPs). The constructed model material of PAF-1-NDMB (NDMB = N,N-dimethyl-butylamine) demonstrates an exceptionally high PFOA uptake capacity over 2000 mg g^-1, which is 14.8 times enhancement compared with its parent material of PAF-1. And it is 32.0 and 24.1 times higher than benchmark materials of DFB-CDP (β-cyclodextrin (β-CD)-based polymer network) and activated carbon under the same conditions. Furthermore, PAF-1-NDMB exhibits the highest k₂ value of 24,000 g mg^-1 h^-1 among all reported PFOA sorbents. And it can remove 99.99% PFOA from 1000 ppb to <70 ppt within 2 min, which is lower than the advisory level of Environmental Protection Agency of United States. This work thus not only provides a generic approach for constructing PFOA adsorbents, but also develops POPs as a platform for PFOA capture.

Graphitic Aza-Fused π-Conjugated Networks: Construction, Engineering, and Task-Specific Applications

2D π-conjugated networks linked by aza-fused units represent a pivotal category of graphitic materials with stacked nanosheet architectures. Extensive efforts have been directed at their fabrication and application since the discovery of covalent triazine frameworks (CTFs). Besides the triazine cores, tricycloquinazoline and hexaazatriphenylene linkages are further introduced to tailor the structures and properties. Diverse related materials have been developed rapidly, and a thorough outlook is necessitated to unveil the structure-property-application relationships across multiple subcategories, which is pivotal to guide the design and fabrication toward enhanced task-specific performance. Herein, the structure types and development of related materials including CTFs, covalent quinazoline networks, and hexaazatriphenylene networks, are introduced. Advanced synthetic strategies coupled with characterization techniques provide powerful tools to engineer the properties and tune the associated behaviors in corresponding applications. Case studies in the areas of gas adsorption, membrane-based separation, thermo-/electro-/photocatalysis, and energy storage are then addressed, focusing on the correlation between structure/property engineering and optimization of the corresponding performance, particularly the preferred features and strategies in each specific field. In the last section, the underlying challenges and opportunities in construction and application of this emerging and promising material category are discussed.

Triazine 2D Nanosheets as a New Class of Nanomaterials: Crystallinity, Properties and Applications

Based on the recent (2015–2021) literature data, the authors analyze the mutual dependence of crystallinity/amorphism and specific surface area and porosity in covalent triazine frameworks (CTFs), taking into account thermodynamic and kinetic control in the synthesis of these 2D nanosheets. CTFs have now become a promising new class of high-performance porous organic materials. They can be recycled and reused easily, and thus have great potential as sustainable materials. For 2D CTFs, numerous examples are given to support the known rule that the structure and properties of any material with a given composition depend on the conditions of its synthesis. The review may be useful for elder students, postgraduate students, engineers and research fellows dealing with chemical synthesis and modern nanotechnologies based on 2D covalent triazine frameworks.

Facile preparation of oxygen-rich porous polymer microspheres from lignin-derived phenols for selective CO2 adsorption and iodine vapor capture

Lignin is a natural O-containing aromatic amorphous polymers from the residues of biorefinery and industrial papermaking, it can derive lots of aromatic phenol chemicals used as industrial raw materials by an efficient depolymerization, and then produce synthetic polymers. Here, we selected six aromatic units from the liquid products of lignin depolymerization, and tried to prepare diversified O-rich hyper-cross-linked polymers (HCPs) by one-pot Friedel-Crafts alkylation reaction for CO₂ and iodine vapor capture. HCP1, HCP2, and HCP3 microspheres possessed similar porous structure with Brunauer-Emmett-Teller (BET) surface areas (S_BET) of 14.1-20.6 m²/g and high O content (26.34-30.68 wt%), while HCP4, HCP5, and HCP6 were composed of many bulks with 3D networks structure, and showed larger S_BET of 15.4-246.9 m²/g and relatively low O content (18.48-26.38 wt%). The results indicated that the chemical position and quantities of substituent groups (methoxy and alkyl) into lignin-derived units had evident impact on their morphology and textural parameters. These HCPs exhibited considerable CO₂ uptake (64.1 mg/g) and selectivity (35.2) at 273 K， and high iodine vapor uptake (192.3 wt%). Moreover, the performance analysis implied that the S_BET and pore volume of these HCPs had not played the dominated roles in the CO₂ and I₂ adsorption, while their pore size distribution, O-functional groups, and electron density will be more important for the capture of the both. This study will offer a facile synthesis of O-rich polymer microsphere adsorbents based on the green and sustainable lignin.

A Rigid and Planar Aza-Based Ternary Anhydride for the Preparation of Cross-Linked Polyimide Membrane Displaying High CO2/CH4 Separation Performance

In this study, based on the preparation of hexaazatriphenylene-ternary-anhydride (HAT-T), polyimide membranes were prepared by reaction of 4,4′-(hexafluoroisopropylidene)diphthalic anhydride (6FDA), 4,4′-diaminodiphenyl sulfide (SDA), 2,2′-bis (trifluoromethyl)diaminobiphenyl (TFDB) and 5-amino-2-(4-aminophenyl) benzimidazole (PABZ). Polyimide films with a hexazobenzo structure have good film-forming properties, high molecular weight (Mn = 0.79–11.79 × 106, Mw = 1.03–16.60 × 106) and narrow molecular weight distribution (polymer dispersity index = 1.17–1.54). With the introduction of rigid HAT-T, the tensile strength and elongation at break of polyimide films are 195.63–510.37 MPa and 4.00–9.70%, respectively, with excellent mechanical properties. The gas separation performance test shows that hexaazatriphenylene-containing polyimide films have good gas selectivity for CO2/CH4. In particular, the separation performance of PIc-t (6FDA/PABZ/HAT-T) surpasses the “2008 Robeson Upper Bound”. The selectivity of 188.43 for CO2/CH4 gas reveals its potential value in the separation and purification of methane gas.

Selective CO2 adsorption and bathochromic shift in a phosphocholine-based lipid and conjugated polymer assembly

We assemble a film of a phosphocholine-based lipid and a crystalline conjugated polymer using hydrophobic interactions between the alkyl tails of the lipid and alkyl side chains of the polymer, and demonstrated its selective gas adsorption properties and the polymer's improved light absorption properties. We show that a strong attractive interaction between the polar lipid heads and CO₂ was responsible for 6 times more CO₂ being adsorbed onto the assembly than N₂, and that with repeated CO₂ adsorption and vacuuming procedures, the assembly structures of the lipid-polymer assembly were irreversibly changed, as demonstrated by in situ grazing-incidence X-ray diffraction during the gas adsorption and desorption. Despite the disruption of the lipid structure caused by adsorbed polar gas molecules on polar head groups, gas adsorption could promote orderly alkyl chain packing by inducing compressive strain, resulting in enhanced electron delocalization of conjugated backbones and bathochromic light absorption. The findings suggest that merging the structures of the crystalline functional polymer and lipid bilayer is a viable option for solar energy-converting systems that use conjugated polymers as a light harvester and the polar heads as CO₂-capturing sites.

Assembly films of a phosphocholine-based lipid and a crystalline conjugated polymer had significant CO₂ selective adsorption and light absorption due to the attractive interaction of CO₂ with exposed polar lipid heads and enhanced morphologies.

Temperature-Dependent Nitrous Oxide/Carbon Dioxide Preferential Adsorption in a Thiazolium-Functionalized NU-1000 Metal-Organic Framework

Solvent-assisted ligand incorporation (SALI) of the ditopic linker 5-carboxy-3-(4-carboxybenzyl)thiazolium bromide [(H₂PhTz)Br] into the zirconium metal-organic framework NU-1000 [Zr₆O₄(OH)₈(H₂O)₄(TBAPy)₂, where NU = Northwestern University and H₄TBAPy = 1,3,6,8-tetrakis(p-benzoic-acid)pyrene], led to the SALIed NU-1000-PhTz material of minimal formula [Zr₆O₄(OH)₆(H₂O)₂(TBAPy)₂(PhTz)]Br. NU-1000-PhTz has been thoroughly characterized in the solid state. As confirmed by powder X-ray diffraction, this material keeps the same three-dimensional architecture of NU-1000 and the dicarboxylic extra linker bridges adjacent [Zr₆] nodes ca. 8 Å far apart along the crystallographic c-axis. The functionalized MOF has a BET specific surface area of 1560 m²/g, and it is featured by a slightly higher thermal stability than its parent material (T_dec = 820 vs. 800 K, respectively). NU-1000-PhTz has been exploited for the capture and separation of two pollutant gases: carbon dioxide (CO₂) and nitrous oxide (N₂O). The high thermodynamic affinity for both gases [isosteric heat of adsorption (Q_st) = 25 and 27 kJ mol^-1 for CO₂ and N₂O, respectively] reasonably stems from the strong interactions between these (polar) "stick-like" molecules and the ionic framework. Intriguingly, NU-1000-PhTz shows an unprecedented temperature-dependent adsorption capacity, loading more N₂O in the 298 K ≤ T ≤ 313 K range but more CO₂ at temperatures falling out of this range. Grand canonical Monte Carlo simulations of the adsorption isotherms confirmed that the preferential adsorption sites of both gases are the triangular channels (micropores) in close proximity to the polar pillar. While CO₂ interacts with the thiazolium ring in an "end-on" fashion through its O atoms, N₂O adopts a "side-on" configuration through its three atoms simultaneously. These findings open new horizons in the discovery of functional materials that may discriminate between polluting gases through selective adsorption at different temperatures.

High performance CO2 capture at elevated temperatures by using cenospheres prepared from solid waste, fly ash

Cenospheres (CS) are spherical shaped inorganic frameworks present in with fly ash which is generated from coal-fired thermal power plants. These spherical structures were functionalized with imidazole and amine moieties to capture CO₂ selectively from flue gases at elevated temperature. The functionalized CS have shown a high selectivity for CO₂ adsorption (4.68 mmol g^-1) over N₂ (0.46 mmol g^-1) at 333 K/1 bar from a simulated flue gas (0.15 CO₂ and 0.85 N₂, v%) composition of thermal power plants. When the moisture content reached to 30 vol% the adsorption capacity of CS materials was reduced to 20 vol% as compared to dry flue gas. The functionalized CS can be used repeatedly for 50 cycles without losing its adsorption capacity. The cost estimate for CO₂ capture by using the proposed adsorption system would be $12.01/ton of CO₂ which is lower as compared to amine absorption system and zeolite-based adsorption system reported in the literature. The CS materials are prepared from solid wastes reduce the cost of production and their large scale manufacturing is technically feasible to capture CO₂ from industrial flue gases efficiently in near future.

Highly Perfluorinated Covalent Triazine Frameworks Derived from a Low-Temperature Ionothermal Approach Towards Enhanced CO2 Electroreduction

Perfluorinated covalent triazine frameworks (F-CTFs) have shown unique features and attractive performance in separation and catalysis. However, state-of-the-art F-CTFs synthesized via the ZnCl₂ -promoted procedure have quite low fluorine contents due to C-F bond cleavage induced by chloride (a Lewis base) and the harsh conditions deployed (400-700 °C). Fabricating F-CTFs with high fluorine contents (>30 wt %) remains challenging. Herein, we present a low-temperature ionothermal approach (275 °C) to prepare F-CTFs, which is achieved via polymerization of tetrafluoroterephthalonitrile (TFPN) over the Lewis superacids, e.g., zinc triflimide [Zn(NTf₂ )₂ ] without side reactions. With low catalyst loading (equimolar), F-CTFs are afforded with high fluorine content (31 wt %), surface area up to 367 m²  g^-1 , and micropores around 1.1 nm. The highly hydrophobic F-CTF-1 exhibits good capability to boost electroreduction of CO₂ to CO, with faradaic efficiency of 95.7 % at -0.8 V and high current density (-141 mA cm^-2 ) surpassing most of the metal-free electrocatalysts.

Rapid, Ordered Polymerization of Crystalline Semiconducting Covalent Triazine Frameworks

The rapid synthesis of crystalline covalent triazine frameworks (CTFs) and exploration of the polymerization mechanism are highly desired for the research of crystalline porous polymers, but have not yet been reported. Herein, we demonstrate a scalable microwave-assisted synthetic strategy to successfully prepare a series of highly crystalline and semiconducting CTFs within 20 minutes for the first time. By in situ imaging and time-dependent characterization, we proposed an ordered two-dimensional (2D) polymerization mechanism for crystalline CTFs, in which the monomers rapidly polymerize into periodic 2D molecular sheets within 10 s and then grow into more ordered framework structures. Photocatalytic study of CTF with different crystallinity revealed that large crystalline domain could significantly improve the photocatalytic performance. Single-layer and few-layer crystalline 2D triazine polymer nanosheets could be obtained through simple ball-milling exfoliation of the bulk layered CTFs and exhibit nearly fivefold improved photocatalytic hydrogen evolution rate up to 7971 μmol g^-1  h^-1 .

A Solvent-Polarity-Induced Interface Self-Assembly Strategy towards Mesoporous Triazine-Based Carbon Materials

Triazine-based materials with porous structure have recently received numerous attentions as a fascinating new class because of their superior potential for various applications. However, it is still a formidable challenge to obtain triazine-based materials with precise adjustable meso-scaled pore sizes and controllable pore structures by reported synthesis approaches. Herein, we develop a solvent polarity induced interface self-assembly strategy to construct mesoporous triazine-based carbon materials. In this method, we employ a mixed solvent system within a suitable range of polarity (0.223≤Lippert-Mataga parameter (Δf) ≤0.295) to induce valid self-assembly of skeleton precursor and surfactant. The as-prepared mesoporous triazine-based carbon materials possess uniform tunable pore sizes (8.2-14.0 nm), high surface areas and ultrahigh nitrogen content (up to 18 %). Owing to these intriguing advantages, the fabricated mesoporous triazine-based carbon materials as functionalized porous solid absorbents exhibit predominant CO₂ adsorption performance and exceptional selectivity for the capture of CO₂ over N₂ .

Unprecedented processable hypercrosslinked polymers with controlled knitting

Processable microporous organic polymers (MOPs) attract incomparable research interests becuase their vairous types such as monoliths and membranes are for practical application. Most of processable MOPs usually need the harsh conditions such as the use of expensive metal catalysts, specialized stereospecific monomers etc., which restrict the sustainable and real applications of processable MOPs. Therefore, the economical mass production of processable MOPs remains a formidable challenge. Herein, we report that a novel strategy for constructing processable hypercrosslinked polymers (HCPs) need two steps synthesis of pre-crosslinking and deep-crosslinking using divinylbenzene (DVB) as self-crosslinking monomer under the catalysis of a small amount of FeCl₃ . The resulting HCPs monoliths possess high BET surface area of 1033-1056 m² g^-1 with hierarchical porosity, and show excellent mechanical strength up to 65 MPa. It is, to the best of our knowledge, the first report of using aromatic vinyl monomers as self-crosslinking monomers to generate HCPs monoliths with high surface area, yielding no by-products and high mechanical strength. This article is protected by copyright. All rights reserved.

Porous Organic Polymers for Catalytic Conversion of Carbon Dioxide

To overcome the challenges of global warming and environmental pollution, it is necessary to reduce the concentration of carbon dioxide (CO₂ ) in the atmosphere, which is mainly accumulated in the air through the burning of fossil fuels. Therefore, the development of environmentally friendly strategies to capture carbon dioxide and convert it into value-added products offers a promising way forward for reducing carbon dioxide concentration in the atmosphere. In this context, POPs (porous organic polymers) have shown great potential as CO₂ selective adsorbents due to their high specific surface area, chemical stability, nanoscale porosity and structural diversity, as well as POPs based heterogeneous catalysts for CO₂ conversion. This review provides a concise account of preparation methods of various POPs, challenges and current development trends of POPs in photocatalytic CO₂ reduction, electrocatalytic CO₂ reduction and chemical CO₂ conversion.

Amide-bridged conjugated organic polymers: efficient metal-free catalysts for visible-light-driven CO2 reduction with H2O to CO

The visible-light-driven photoreduction of CO₂ to value-added chemicals over metal-free photocatalysts without sacrificial reagents is very interesting, but challenging. Herein, we present amide-bridged conjugated organic polymers (amide-COPs) prepared via self-condensation of amino nitriles in combination with hydrolysis, for the photoreduction of CO₂ with H₂O without any photosensitizers or sacrificial reagents under visible light irradiation. These catalysts can afford CO as the sole carbonaceous product without H₂ generation. Especially, amide-DAMN derived from diaminomaleonitrile exhibited the highest activity for the photoreduction of CO₂ to CO with a generation rate of 20.6 μmol g^-1 h^-1. Experiments and DFT calculations confirmed cyano/amide groups as active sites for CO₂ reduction and second amine groups for H₂O oxidation, and suggested that superior selectivity towards CO may be attributed to the adjacent redox sites. This work presents a new insight into designing photocatalysts for artificial photosynthesis.

Nitrogen-rich covalent triazine frameworks for high-efficient removal of anion dyes and the synergistic adsorption of cationic dyes

Efficient adsorption of organic dyes from effluent has great importance for ecological and environmental protection. Herein, covalent triazine frameworks (CTFs) were constructed via the polycondensation of melamine and cyanuric chloride directly. Due to the numerous basic nitrogen atoms as high as 58.98 wt%, high BET surface area (670.2 m g^-1), and hierarchical pore structure, CTFs demonstrated selective adsorption of anionic dyes in high capacity (e.g., a maximum adsorption capacity of 1581 mg g^-1 for Congo red at 30 °C). The mechanism of the outstanding adsorption performance was carefully verified and ascribed to the electrostatic attraction and hydrogen bonding between CTFs and anionic dyes. The amine groups linking two adjacent triazine rings have primary responsibility for the superior performance. Unexpectedly, CTFs expressed a tuning synergetic effect for removing cationic dyes in aqueous solution coexisting with anionic dyes, exhibiting a great superiority in the specific and comprehensive treatment of organic dyes contaminated water. Furthermore, CTFs were stable and had long-periodic availability for more than 6 times, ensuring the adsorption rate higher than 90%. For better operation, hybrid monolithic aerogels were constructed by incorporating CTFs into polyvinylidene fluoride then casting in melamine resin foams. The obtained aerogels expressed high-efficient removal of anionic dyes coupled with convenient operation. This well-established metal-free porous material is a promising adsorbent candidate for anionic dyes selectively and even synergetic adsorption of cationic dyes in water remediation.

Carbon dioxide adsorption based on porous materials

Global warming due to the high concentration of anthropogenic CO2 in the atmosphere is considered one of the world's leading challenges in the 21st century as it leads to severe consequences such as climate change, extreme weather events, ocean warming, sea-level rise, declining Arctic sea ice, and the acidification of oceans. This encouraged advancing technologies that sequester carbon dioxide from the atmosphere or capture those emitted before entering the carbon cycle. Recently, CO2 capture, utilizing porous materials was established as a very favorable route, which has drawn extreme interest from scientists and engineers due to their advantages over the absorption approach. In this review, we summarize developments in porous adsorbents for CO2 capture with emphasis on recent studies. Highly efficient porous adsorption materials including metal-organic frameworks (MOFs), zeolites, mesoporous silica, clay, porous carbons, porous organic polymers (POP), and metal oxides (MO) are discussed. Besides, advanced strategies employed to increase the performance of CO2 adsorption capacity to overcome their drawbacks have been discoursed.

Pre-carbonized nitrogen-rich polytriazines for the controlled growth of silver nanoparticles: catalysts for enhanced CO2 chemical conversion at atmospheric pressure

Mono-dispersed Ag NPs were generated controllably in pre-carbonized covalent triazine frameworks for CO₂ conversion at mild conditions with excellent catalytic activity.

Catalyst-free development of N-doped microporous carbons for selective CO2 separation

Owing to their catalyst-free development, high yield, notable CO₂ uptake performance, and excellent CO₂/CH₄ selectivity, the fabricated N-doped microporous carbons (NMCs) are highly suitable for selective CO₂ separation.

Construction of Oxygen-Rich Carbon Foams for Rapid Carbon Dioxide Capture

As carbon dioxide (CO₂) adsorbents, porous materials with high specific surface areas and abundant CO₂-philic groups always exhibit high CO₂ capacities. Based on this consensus, a category of oxygen-rich macroporous carbon foams was fabricated from macroporous resorcinol-formaldehyde resins (PRFs), which were obtained via an oil-in-water concentrated emulsion. By the active effect of potassium hydroxide (KOH) at high temperatures, the resultant carbon foams (ACRFs) possessed abundant micropores with rich oxygen content simultaneously. At the same time, most of the ACRFs could retain the marcoporous structure of their precursor. It is found that porosity of ACRFs was mainly determined by carbonization temperature, and the highest specific surface areas and total pore volume of ACRFs could reach 2046 m²/g and 0.900 cm³/g, respectively. At 273 k, ACRFs showed highest CO₂ capacity as 271 mg/g at 1 bar and 91.5 mg at 15 kPa. Furthermore, it is shown that the ultra-micropore volume was mainly responsible for the CO₂ capacities of ACRFs at 1 bar, and CO₂ capacities at 15 kPa were mainly affected by the oxygen content. It is also found that the presence of macropores would accelerate ACRFs adsorbing CO₂. This study provides ideas for designing a porous CO₂ adsorbent.

Direct Z-Scheme Heterojunction of SnS2 /Sulfur-Bridged Covalent Triazine Frameworks for Visible-Light-Driven CO2 Photoreduction

Solar-driven reduction of CO₂ into renewable carbon forms is considered as an alternative approach to address global warming and the energy crisis but suffers from low efficiency of the photocatalysts. Herein, a direct Z-Scheme SnS₂ /sulfur-bridged covalent triazine frameworks (S-CTFs) photocatalyst (denoted as SnS₂ /S-CTFs) was developed, which could efficiently adsorb CO₂ owing to the CO₂ -philic feature of S-CTFs and promote separation of photoinduced electron-hole pairs. Under visible-light irradiation, SnS₂ /S-CTFs exhibited excellent performance for CO₂ photoreduction, yielding CO and CH₄ with evolution rates of 123.6 and 43.4 μmol g^-1  h^-1 , respectively, much better than the most catalysts reported to date. This inorganic/organic hybrid with direct Z-Scheme structure for visible-light-driven CO₂ photoreduction provides new insights for designing photocatalysts with high efficiency for solar-to-fuel conversion.

Illustrating the Role of Quaternary-N of BINOL Covalent Triazine-Based Frameworks in Oxygen Reduction and Hydrogen Evolution Reactions

Defective nitrogen-doped carbon materials have shown a promising application as metal-free electrocatalysts in the oxygen reduction reaction (ORR) and the hydrogen evolution reaction (HER). However, there are still some challenges in the tuning of metal-free electrocatalysts and in understanding the roles of various nitrogen species in their electrocatalytic performance. Herein, we design a covalent triazine framework (CTF)-based material as an effective metal-free bifunctional electrocatalyst. We chose BINOL-CN (2,2'-dihydroxy-[1,1'-binaphthalene]-6,6'-dicarbonitrile) as both a carbon and a nitrogen source for the fabrication of N-containing CTF-based materials. Four BINOL-CTFs with varying N-functionalities (pyridinic-N/triazine-N, pyrrolic-N, quaternary-N, and pyridine-N-oxide) were successfully obtained. These materials were evaluated in the ORR and the HER in basic and acidic conditions, respectively. The best material has an onset potential of 0.793 V and a half-wave potential of 0.737 V, and it follows first-order kinetics in a 4e^- pathway in the ORR reaction. The same material shows an impressive HER activity with an overpotential of 0.31 V to achieve 10 mA/cm² and a small Tafel slope of 41 mV/dec, which is comparable to 31 mV/dec for Pt/C, making it a potential bifunctional electrocatalyst. We showed that the ORR and HER reactivity of CTF-based materials depends exclusively on the amount of quaternary-N species and on the available surface area and pore volume. This work highlights the engineering of CTF materials with varying amounts of N species as high-performance bifunctional electrocatalysts.