C–H Activation on Co,O Sites: Isolated Surface Sites versus Molecular Analogs

Silicon Nitride Surface Enabled Propane Dehydrogenation Catalyzed by Supported Organozirconium

Mesoporous silicon nitride (Si3N4) is a nontraditional support for the chemisorption of organometallic complexes with the potential for enhancing catalytic activity through features such as the increased Lewis basicity of nitrogen for heterolytic bond activation, increased ligand donor strength, and metal-ligand orbital overlap. Here, tetrabenzyl zirconium (ZrBn4) was chemisorbed on Si3N4, and the resulting supported organometallic species was characterized by Diffuse Reflectance Infrared Fourier Transform Spectroscopy (DRIFTS), Dynamic Nuclear Polarization-enhanced Solid State Nuclear Magnetic Resonance (DNP-SSNMR), and X-ray Absorption Spectroscopy (XAS). Based on the hypothesis that the nitride might enable facile heterolytic C-H bond activation along the Zr-N bond, this material was found to be a highly active (1.53 molpropene molZr-1 h-1 at 450 °C) and selective (99% to propylene) catalyst for propane dehydrogenation. In contrast, the homologous silica supported complex exhibited negligible activity under these conditions.

Highly Selective and Efficient Perdeuteration of n-Pentane via H/D Exchange Catalyzed by a Silica-Supported Hafnium-Iridium Bimetallic Complex

A Surface OrganoMetallic Chemistry (SOMC) approach is used to prepare a novel hafnium-iridium catalyst immobilized on silica, HfIr/SiO2, featuring well-defined [≡SiOHf(CH2 tBu)2(μ-H)3IrCp*] surface sites. Unlike the monometallic analogous materials Hf/SiO2 and Ir/SiO2, which promote n-pentane deuterogenolysis through C-C bond scission, we demonstrate that under the same experimental conditions (1 bar D2, 250 °C, 3 h, 0.5 mol %), the heterobimetallic catalyst HfIr/SiO2 is highly efficient and selective for the perdeuteration of alkanes with D2, exemplified on n-pentane, without substantial deuterogenolysis (<2 % at 95 % conversion). Furthermore this HfIr/SiO2 catalyst is robust and can be re-used several times without evidence of decomposition. This represents substantial advance in catalytic H/D isotope exchange (HIE) reactions of C(sp3)-H bonds.

Tricoordinated Single-Atom Cobalt in Zeolite Boosting Propane Dehydrogenation

Propane dehydrogenation (PDH) reaction has emerged as one of the most promising propylene production routes due to its high selectivity for propylene and good economic benefits. However, the commercial PDH processes usually rely on expensive platinum-based and poisonous chromium oxide based catalysts. The exploration of cost-effective and ecofriendly PDH catalysts with excellent catalytic activity, propylene selectivity, and stability is of great significance yet remains challenging. Here, we discovered a new active center, i.e., an unsaturated tricoordinated cobalt unit (≡Si-O)CoO(O-Mo) in a molybdenum-doped silicalite-1 zeolite, which afforded an unprecedentedly high propylene formation rate of 22.6 molC3H6 gCo-1 h-1 and apparent rate coefficient of 130 molC3H6 gCo-1 h-1 bar-1 with >99% of propylene selectivity at 550 °C. Such activity is nearly one magnitude higher than that of previously reported Co-based catalysts in which cobalt atoms are commonly tetracoordinated, and even superior to that of most of Pt-based catalysts under similar operating conditions. Density functional theory calculations combined with the state-of-the-art characterizations unravel the role of the unsaturated tricoordinated Co unit in facilitating the C-H bond-breaking of propane and propylene desorption. The present work opens new opportunities for future large-scale industrial PDH production based on inexpensive non-noble metal catalysts.

Structured Catalysts and Catalytic Processes: Transport and Reaction Perspectives

The structure of catalysts determines the performance of catalytic processes. Intrinsically, the electronic and geometric structures influence the interaction between active species and the surface of the catalyst, which subsequently regulates the adsorption, reaction, and desorption behaviors. In recent decades, the development of catalysts with complex structures, including bulk, interfacial, encapsulated, and atomically dispersed structures, can potentially affect the electronic and geometric structures of catalysts and lead to further control of the transport and reaction of molecules. This review describes comprehensive understandings on the influence of electronic and geometric properties and complex catalyst structures on the performance of relevant heterogeneous catalytic processes, especially for the transport and reaction over structured catalysts for the conversions of light alkanes and small molecules. The recent research progress of the electronic and geometric properties over the active sites, specifically for theoretical descriptors developed in the recent decades, is discussed at the atomic level. The designs and properties of catalysts with specific structures are summarized. The transport phenomena and reactions over structured catalysts for the conversions of light alkanes and small molecules are analyzed. At the end of this review, we present our perspectives on the challenges for the further development of structured catalysts and heterogeneous catalytic processes.

Cooperative activation of carbon-hydrogen bonds by heterobimetallic systems

The direct activation of C-H bonds has been a rich and active field of organometallic chemistry for many years. Recently, incredible progress has been made and important mechanistic insights have accelerated research. In particular, the use of heterobimetallic complexes to heterolytically activate C-H bonds across the two metal centers has seen a recent surge in interest. This perspective article aims to orient the reader in this fast moving field, highlight recent progress, give design considerations for further research and provide an optimistic outlook on the future of catalytic C-H functionalization with heterobimetallic complexes.

Stabilization of Potent Co(II)-based Lewis Acids with Weakly Basic Ligands

Pairing cations with weakly coordinating anions (WCAs) often renders them highly Lewis-acidic and extremely reactive. Although these features are often desirable, excessive reactivity of a cation may lead to decomposition of solvents or WCAs, hindering isolation, storage and practical use of such species. In an attempt to mitigate the problem, we introduce a series of readily available novel Co(II)-WCA salts with the metal center stabilized by weakly bound ligands: SO₂ , halogenated acetonitriles and nitromethane with comprehensive characterization including structural, magnetic and spectral (IR) properties as well as thermal stability assessment. The use of these simple yet rarely encountered ligands yields mostly stable and highly Lewis-acidic complexes, in some cases comparable to SbF₅ according to calculated Fluoride Ion Affinities. Highly acidic character of the species is also reflected in observed reactivity. Since the most convenient route towards the Co(II) complexes leads through silver salts, the results are complemented with characterization of a series of novel Ag(I) complexes with abovementioned ligands. Experimental part is backed with DFT calculations which gives insight into the structure and energetics of presented Co(II) complexes and shows that Co(II) center is available for substrates like olefins. This makes them good candidates for catalysts in reactions requiring the presence of Lewis acids.

Spin Hyperpolarization in Modern Magnetic Resonance

Magnetic resonance techniques are successfully utilized in a broad range of scientific disciplines and in various practical applications, with medical magnetic resonance imaging being the most widely known example. Currently, both fundamental and applied magnetic resonance are enjoying a major boost owing to the rapidly developing field of spin hyperpolarization. Hyperpolarization techniques are able to enhance signal intensities in magnetic resonance by several orders of magnitude, and thus to largely overcome its major disadvantage of relatively low sensitivity. This provides new impetus for existing applications of magnetic resonance and opens the gates to exciting new possibilities. In this review, we provide a unified picture of the many methods and techniques that fall under the umbrella term "hyperpolarization" but are currently seldom perceived as integral parts of the same field. Specifically, before delving into the individual techniques, we provide a detailed analysis of the underlying principles of spin hyperpolarization. We attempt to uncover and classify the origins of hyperpolarization, to establish its sources and the specific mechanisms that enable the flow of polarization from a source to the target spins. We then give a more detailed analysis of individual hyperpolarization techniques: the mechanisms by which they work, fundamental and technical requirements, characteristic applications, unresolved issues, and possible future directions. We are seeing a continuous growth of activity in the field of spin hyperpolarization, and we expect the field to flourish as new and improved hyperpolarization techniques are implemented. Some key areas for development are in prolonging polarization lifetimes, making hyperpolarization techniques more generally applicable to chemical/biological systems, reducing the technical and equipment requirements, and creating more efficient excitation and detection schemes. We hope this review will facilitate the sharing of knowledge between subfields within the broad topic of hyperpolarization, to help overcome existing challenges in magnetic resonance and enable novel applications.

Illustrating new understanding of adsorbed water on silica for inducing tetrahedral cobalt(II) for propane dehydrogenation

Highly dispersed metal sites on the surface of silica, achieved from immobilization of metal precursor within hydroxyl groups, has gained increasing attention in the field of heterogeneous catalyst. However, the special role of adsorbed water derived by hydroxyl groups on the silica is generally ignored. Herein, a new understanding of adsorbed water on the formation of highly dispersed tetrahedral Co(II) (T_d-cobalt(II)) sites is illustrated. It is indicated that sufficient adsorbed water induces the transformation of precursor of Co(NO₃)₂ into intermediate of [Co(H₂O)₆]²⁺. Subsequently, [Co(H₂O)₆]²⁺ makes the highly dispersed T_d-cobalt(II) sites to be available during direct H₂-reduction process. A systematic characterization and DFT calculation prove the existence of the adsorbed water and the importance of the intermediate of [Co(H₂O)₆]²⁺, respectively. The as-synthesized catalyst is attempted to the propane dehydrogenation, which shows better reactivity when compared with other reported Co based catalysts.

Nitrile regio-synthesis by Ni centers on a siliceous surface: implications in prebiotic chemistry

By means of quantum chemistry (PBE0/def2-TZVPP; DLPNO-CCSD(T)/cc-pVTZ) and small, but reliable models of Polyhedral Oligomeric Silsesquioxanes (POSS), an array of astrochemically-relevant catalysis products, related to prebiotic and origin of life chemistry, has been theoretically explored. In this work, the heterogeneous phase hydrocyanation reaction of an unsaturated CC bond (propene) catalyzed by a Ni center complexed to a silica surface is analyzed. Of the two possible regioisomers, the branched iso-propyl-cyanide is thermodynamically and kinetically preferred over the linear n-propyl-cyanide (T = 200 K). The formation of nitriles based on a regioselective process has profound implications on prebiotic and origin of life chemistry, as well as deep connections to terrestrial surface chemistry and geochemistry.

Metal Sites in Zeolites: Synthesis, Characterization, and Catalysis

Zeolites with ordered microporous systems, distinct framework topologies, good spatial nanoconfinement effects, and superior (hydro)thermal stability are an ideal scaffold for planting diverse active metal species, including single sites, clusters, and nanoparticles in the framework and framework-associated sites and extra-framework positions, thus affording the metal-in-zeolite catalysts outstanding activity, unique shape selectivity, and enhanced stability and recyclability in the processes of Brønsted acid-, Lewis acid-, and extra-framework metal-catalyzed reactions. Especially, thanks to the advances in zeolite synthesis and characterization techniques in recent years, zeolite-confined extra-framework metal catalysts (denoted as metal@zeolite composites) have experienced rapid development in heterogeneous catalysis, owing to the combination of the merits of both active metal sites and zeolite intrinsic properties. In this review, we will present the recent developments of synthesis strategies for incorporating and tailoring of active metal sites in zeolites and advanced characterization techniques for identification of the location, distribution, and coordination environment of metal species in zeolites. Furthermore, the catalytic applications of metal-in-zeolite catalysts are demonstrated, with an emphasis on the metal@zeolite composites in hydrogenation, dehydrogenation, and oxidation reactions. Finally, we point out the current challenges and future perspectives on precise synthesis, atomic level identification, and practical application of the metal-in-zeolite catalyst system.

Atomic Insight into the Local Structure and Microenvironment of Isolated Co-Motifs in MFI Zeolite Frameworks for Propane Dehydrogenation

Embedding metal species into zeolite frameworks can create framework-bond metal sites in a confined microenvironment. The metals sitting in the specific T sites of zeolites and their crystalline surroundings are both committed to the interaction with the reactant, participation in the activation, and transient state achievement during the whole catalytic process. Herein, we construct isolated Co-motifs into purely siliceous MFI zeolite frameworks (Co-MFI) and reveal the location and microenvironment of the isolated Co active center in the MFI zeolite framework particularly beneficial for propane dehydrogenation (PDH). The isolated Co-motif with the distorted tetrahedral structure ({(≡SiO)₂Co(HO-Si≡)₂}, two Co-O-Si bonds, and two pseudobridging hydroxyls (Co···OH-Si) is located at T₁₍₇₎ and T₃₍₉₎ sites of the MFI zeolite. DFT calculations and deuterium-labeling reactions verify that the isolated Co-motif together with the MFI microenvironment collectively promotes the PDH reaction by providing an exclusive microenvironment to preactivate C₃H₈, polarizing the oxygen in Co-O-Si bonds to accept H* ({(≡SiO)CoH^δ- (H^δ+O-Si≡)₃}), and a scaffold structure to stabilize the C₃H₇* intermediate. The Co-motif active center in Co-MFI goes through the dynamic evolutions and restoration in electronic states and coordination states in a continuous and repetitive way, which meets the requirements from the series of elementary steps in the PDH catalytic cycle and fulfills the successful catalysis like enzyme catalysis.

Multiple Surface Site Three-Dimensional Structure Determination of a Supported Molecular Catalyst

The structural characterization of supported molecular catalysts is challenging due to the low density of active sites and the presence of several organic/organometallic surface groups resulting from the often complex surface chemistry associated with support functionalization. Here, we provide a complete atomic-scale description of all surface sites in an N-heterocyclic carbene based on iridium and supported on silica, at all stages of its synthesis. By combining a suitable isotope labeling strategy with the implementation of multinuclear dipolar recoupling DNP-enhanced NMR experiments, the 3D structure of the Ir-NHC sites, as well as that of the synthesis intermediates were determined. As a significant fraction of parent surface fragments does not react during the multistep synthesis, site-selective experiments were implemented to specifically probe proximities between the organometallic groups and the solid support. The NMR-derived structure of the iridium sites points to a well-defined conformation. By interpreting EXAFS spectroscopy and chemical analysis data augmented by computational studies, the presence of two coordination geometries is demonstrated: Ir-NHC fragments coordinated by a 1,5-cyclooctadiene and one Cl ligand, as well as, more surprisingly, a fragment coordinated by two NHC and two Cl ligands. This study demonstrates a unique methodology to disclose individual surface structures in complex, multisite environments, a long-standing challenge in the field of heterogeneous/supported catalysts, while revealing new, unexpected structural features of metallo-NHC-supported substrates. It also highlights the potentially large diversity of surface sites present in functional materials prepared by surface chemistry, an essential knowledge to design materials with improved performances.

Advances in Zeolite-Supported Metal Catalysts for Propane Dehydrogenation

Propylene is one of the building blocks of the modern industrial mansion, which is the feeding stock for polypropylene, acrylonitrile, and other important chemicals. Propane dehydrogenation (PDH) is one of...

Stable co-production of olefins and aromatics from ethane over Co2+-exchanged HZSM-5 zeolite

Olefins and aromatics can be stably co-produced from ethane over a Co-exchanged HZSM-5 catalyst in which isolated Co(ii) species are anchored at Brønsted acid sites and active for efficient ethane dehydrogenation.

Activity Trends in the Propane Dehydrogenation Reaction Catalyzed by MIII Sites on an Amorphous SiO2 Model: A Theoretical Perspective

One class of particularly active catalysts for the Propane Dehydrogenation (PDH) reaction are well-defined M(III) sites on amorphous SiO2. In the present work, we focus on evaluating the catalytic trends of the PDH for four M(III) single-sites (Cr, Mo, Ga and In) on a realistic amorphous model of SiO2 using density functional theory-based calculations and the energetic span model. We considered a catalytic pathway spanned by three reaction steps taking place on selected MIII–O pair of the SiO2 model: σ-bond metathesis of propane on a MIII–O bond to form M-propyl and O–H group, a β-H transfer step forming M–H and propene, and the H–H coupling step producing H2 and regenerating the initial M–O bond. With the application of the energetic span model, we found that the calculated catalytic activity for Ga and Cr is comparable to the ones reported at the experimental level, enabling us to benchmark the model and the methodology used. Furthermore, results suggest that both In(III) and Mo(III) on SiO2 are potential active catalysts for PDH, provided they can be synthesized and are stable under PDH reaction conditions.

Atomically Dispersed Co2+ Sites Incorporated into a Silicalite-1 Zeolite Framework as a High-Performance and Coking-Resistant Catalyst for Propane Nonoxidative Dehydrogenation to Propylene

Propane nonoxidative dehydrogenation (PDH) is a promising route to produce propylene with the development of shale gas exploration technology. Co-based catalysts with low cost and low toxicity could activate C-H effectively, but they suffer from deactivation with coke formation. In this work, a catalyst formed by incorporating highly dispersed Co sites into a Silicalite-1 zeolite framework (Co-Silicalite-1) is synthesized by a hydrothermal protocol in the presence of ammonia, which exhibits superior propane dehydrogenation catalytic performance with 0.0946 mmol C₃H₆·s^-1·g_Co^-1 and propylene selectivity higher than 98.5%. It also shows outstanding catalytic stability and coking resistance in a 3560 min time-on-stream. Combined characterization results demonstrate that the tetrahedrally coordinated Co²⁺ site serves as the PDH catalytic active site, which is stabilized by Si-O units of the zeolite framework. Incorporation of Co sites into the zeolite framework could avoid the reduction of Co species to metallic Co. Moreover, the catalytic performance is improved by the enhanced propane adsorption and propylene desorption.

Spatially isolated cobalt oxide sites derived from MOFs for direct propane dehydrogenation

The "active site isolation" strategy has been proved to be efficient for enhancing the catalytic performance in propane dehydrogenation (PDH). Herein, spatially isolated cobalt oxide sites within nitrogen-doped carbon (NC) layers supported on silicalite-1 zeolite (CoO_x@NC/S-1) were synthesized by a two-step process consisting of the pyrolysis of bimetallic Zn/Co zeolitic imidazole frameworks loaded on silicalite-1 (ZnCo-ZIF/S-1) under N₂ and the subsequent calcination in air atmosphere. This catalyst possesses exceptional catalytic performance for PDH with the propane conversion of 40% and the propene selectivity of >97%, and no apparent deactivation is observed after 10 h PDH reaction at 600 °C. With intensive characterizations and experiments, it is indicated that the real active sites of CoO_x@NC/S-1 are isolated CoO sites during the PDH process. In situ FT-IR spectroscopy shows the same intermediate product (Co-C₃H₇) during both propane dehydrogenation and propene hydrogenation, indicating that they have a reverse reaction process, and a reaction mechanism for PDH is proposed accordingly.

Heterogeneous Catalysis and Parahydrogen-Induced Polarization

Parahydrogen-induced polarization with heterogeneous catalysts (HET-PHIP) has been a subject of extensive research in the last decade since its first observation in 2007. While NMR signal enhancements obtained with such catalysts are currently below those achieved with transition metal complexes in homogeneous hydrogenations in solution, this relatively new field demonstrates major prospects for a broad range of advanced fundamental and practical applications, from providing catalyst-free hyperpolarized fluids for biomedical magnetic resonance imaging (MRI) to exploring mechanisms of industrially important heterogeneous catalytic processes. This review covers the evolution of the heterogeneous catalysts used for PHIP observation, from metal complexes immobilized on solid supports to bulk metals and single-atom catalysts and discusses the general visions for maximizing the obtained NMR signal enhancements using HET-PHIP. Various practical applications of HET-PHIP, both for catalytic studies and for potential production of hyperpolarized contrast agents for MRI, are described.

Strain in Silica-Supported Ga(III) Sites: Neither Too Much nor Too Little for Propane Dehydrogenation Catalytic Activity

Well-defined Ga(III) sites on SiO₂ are highly active, selective, and stable catalysts in the propane dehydrogenation (PDH) reaction. In this contribution, we evaluate the catalytic activity toward PDH of tricoordinated and tetracoordinated Ga(III) sites on SiO₂ by means of first-principles calculations using realistic amorphous periodic SiO₂ models. We evaluated the three reaction steps in PDH, namely, the C-H activation of propane to form propyl, the β-hydride (β-H) transfer to form propene and a gallium hydride, and the H-H coupling to release H₂, regenerating the initial Ga-O bond and closing the catalytic cycle. Our work shows how Brønsted-Evans-Polanyi relationships are followed to a certain extent for these three reaction steps on Ga(III) sites on SiO₂ and highlights the role of the strain of the reactive Ga-O pairs on such sites of realistic amorphous SiO₂ models. It also shows how transition-state scaling holds very well for the β-H transfer step. While highly strained sites are very reactive sites for the initial C-H activation, they are more difficult to regenerate. The corresponding less strained sites are not reactive enough, pointing to the need for the right balance in strain to be an effective site for PDH. Overall, our work provides an understanding of the intrinsic activity of acidic Ga single sites toward the PDH reaction and paves the way toward the design and prediction of better single-site catalysts on SiO₂ for the PDH reaction.

Heterogeneous alkane dehydrogenation catalysts investigated via a surface organometallic chemistry approach

The selective conversion of light alkanes (C₂–C₆ saturated hydrocarbons) to the corresponding alkene is an appealing strategy for the petrochemical industry in view of the availability of these feedstocks, in particular with the emergence of Shale gas. Here, we present a review of model dehydrogenation catalysts of light alkanes prepared via surface organometallic chemistry (SOMC). A specific focus of this review is the use of molecular strategies for the deconvolution of complex heterogeneous materials that are proficient in enabling dehydrogenation reactions. The challenges associated with the proposed reactions are highlighted, as well as overriding themes that can be ascertained from the systematic study of these challenging reactions using model SOMC catalysts.

Alkane dehydrogenation over heterogeneous catalysts has attracted renewed attention in recent years. Here, well-defined catalysts based on isolated metal sites and supported Pt-alloys prepared via SOMC are discussed and compared to classical systems.

Well-Defined, Silica-Supported Homobimetallic Nickel Hydride Hydrogenation Catalyst

There is an increasing interest to replace precious metal-based catalysts by earth-abundant nonprecious metals due to higher costs, toxicity, and declining availability of the former. Here, the synthesis of a well-defined supported nickel hydrogenation catalyst prepared by surface organometallic chemistry is reported. For this purpose, [LNi(μ-H)]₂ (L = HC(CMeNC₆H₃(ⁱPr)₂)₂) was grafted on partially dehydroxylated silica to give a homobimetallic H- and O(silica)-bridged Ni₂ complex. The structure of the latter was confirmed by infrared spectroscopy, X-ray absorption near-edge structure, and extended X-ray absorption fine structure analyses as well as hydride titration studies. The immobilized catalyst was capable of hydrogenating alkenes and alkynes at low temperatures without prior activation. As an example, ethene can be hydrogenated with an initial turnover frequency of 25.5 min^-1 at room temperature.

Complex Organic Matter Synthesis on Siloxyl Radicals in the Presence of CO

Heterogeneous phase astrochemistry plays an important role in the synthesis of complex organic matter (COM) as found on comets and rocky body surfaces like asteroids, planetoids, moons and planets. The proposed catalytic model is based on two assumptions: (a) siliceous rocks in both crystalline or amorphous states show surface-exposed defective centers such as siloxyl (Si-O•) radicals; (b) the second phase is represented by gas phase CO molecules, an abundant C₁ building block found in space. By means of quantum chemistry; (DFT, PW6B95/def2-TZVPP); the surface of a siliceous rock in presence of CO is modeled by a simple POSS (polyhedral silsesquioxane) where a siloxyl (Si-O•) radical is present. Four CO molecules have been consecutively added to the Si-O• radical and to the nascent polymeric CO (pCO) chain. The first CO insertion shows no activation free energy with ΔG_200K = −21.7 kcal/mol forming the SiO-CO• radical. The second and third CO insertions show ΔG200K‡ ≤ 10.5 kcal/mol. Ring closure of the SiO-CO-CO• (oxalic anhydride) moiety as well as of the SiO-CO-CO-CO• system (di-cheto form of oxetane) are thermodynamically disfavored. The last CO insertion shows no free energy of activation resulting in the stable five member pCO ring, precursor to 1,4-epoxy-1,2,3-butanone. Hydrogenation reactions of the pCO have been considered on the SiO oxygen or on the carbons and oxygens of the pCO chains. The formation of the reactive aldehyde SiO-CHO on the siliceous surface is possible. In principle, the complete hydrogenation of the (CO)₁₋₄ series results in the formation of methanol and polyols. Furthermore, all the SiO-pCO intermediates and the lactone 1,4-epoxy-1,2,3-butanone product in its radical form can be important building blocks in further polymerization reactions and/or open ring reactions with H (aldehydes, polyols) or CN (chetonitriles), resulting in highly reactive multi-functional compounds contributing to COM synthesis.

Propane dehydrogenation: catalyst development, new chemistry, and emerging technologies

This review describes recent advances in the propane dehydrogenation process in terms of emerging technologies, catalyst development and new chemistry.

Recent progress in heterogeneous metal and metal oxide catalysts for direct dehydrogenation of ethane and propane

Metal and metal oxide catalysts for non-oxidative ethane/propane dehydrogenation are outlined with respect to catalyst synthesis, structure–property relationship and catalytic mechanism.

Current status and perspectives in oxidative, non-oxidative and CO2-mediated dehydrogenation of propane and isobutane over metal oxide catalysts

Conversion of propane or isobutane from natural/shale gas into propene or isobutene, which are indispensable for the synthesis of commodity chemicals, is an important environmentally friendly alternative to oil-based cracking processes.

Catalytic hydrogenation with parahydrogen: a bridge from homogeneous to heterogeneous catalysis

One of the essential themes in modern catalysis is that of bridging the gap between its homogeneous and heterogeneous counterparts to combine their individual advantages and overcome shortcomings. One more incentive can now be added to the list, namely the ability of transition metal complexes to provide strong nuclear magnetic resonance (NMR) signal enhancement upon their use in homogeneous hydrogenations of unsaturated compounds with parahydrogen in solution. The addition of both H atoms of a parahydrogen molecule to the same substrate, a prerequisite for such effects, is implemented naturally with metal complexes that operate via the formation of a dihydride intermediate, but not with most heterogeneous catalysts. Despite that, it has been demonstrated in recent years that various types of heterogeneous catalysts are able to perform the required pairwise H2 addition at least to some extent. This has opened a major gateway for developing highly sensitive and informative tools for mechanistic studies of heterogeneous hydrogenations and other processes involving H2. Besides, production of catalyst-free fluids with NMR signals enhanced by 3-4 orders of magnitude is essential for modern applications of magnetic resonance imaging (MRI), including biomedical research and practice. The ongoing efforts to design heterogeneous catalysts which can implement the homogeneous (pairwise) hydrogenation mechanism are reported.

Iron doping boosts the reactivity and stability of the γ-Al2O3 nanosheet supported cobalt catalyst for propane dehydrogenation

This study describes a new iron-doping strategy to improve both the reactivity and stability of a cobalt catalyst in propane dehydrogenation, meanwhile, the defective γ-Al₂O₃ nanosheet synergistically boosted the dehydrogenating activity of that.