Turning on the Protonation-First Pathway for Electrocatalytic CO2 Reduction by Manganese Bipyridyl Tricarbonyl Complexes

Photocatalytic Conversion of CO2 to Formate/CO by an (η6-para-Cymene)Ru(II) Half-Metallocene Catalyst: Influence of Additives and TiO2 Immobilization on the Catalytic Mechanism and Product Selectivity

The catalytic efficacy of the monobipyridyl (η6-para-Cymene)Ru(II) half-metallocene, [(p-Cym)Ru(bpy)Cl]+ was evaluated in both mixed homogeneous (dye + catalyst) and heterogeneous hybrid systems (dye/TiO2/Catalyst) for photochemical CO2 reduction. A series of homogeneous photolysis experiments revealed that the (p-Cym)Ru(II) catalyst engages in two competitive routes for CO2 reduction (CO2 to formate conversion via RuII-hydride vs CO2 to CO conversion through a RuII-COOH intermediate). The conversion activity and product selectivity were notably impacted by the pKa value and the concentration of the proton source added. When a more acidic TEOA additive was introduced, the half-metallocene Ru(II) catalyst leaned toward producing formate through the RuII-H mechanism, with a formate selectivity of 86%. On the other hand, in homogeneous catalysis with TFE additive, the CO2-to-formate conversion through RuII-H was less effective, yielding a more efficient CO2-to-CO conversion with a selectivity of >80% (TONformate of 140 and TONCO of 626 over 48 h). The preference between the two pathways was elucidated through an electrochemical mechanistic study, monitoring the fate of the metal-hydride intermediate. Compared to the homogeneous system, the TiO2-heterogenized (p-Cym)Ru(II) catalyst demonstrated enhanced and enduring performance, attaining TONs of 1000 for CO2-to-CO and 665 for CO2-to-formate.

Photocatalytic CO2 Reduction Using Mixed Catalytic Systems Comprising an Iron Cation with Bulky Phenanthroline Ligands

This study reports on efficient photocatalytic CO2 reduction reactions using mixed catalytic systems of an Fe ion source and various 1,10-phenanthroline derivatives (R1R2p) as ligands in the presence of triethanolamine (TEOA). As the relatively bulky substituents at positions 2 and 9 of R1R2p weakened the ability to coordinate to the Fe ion, the Fe ion formed TEOA complexes. The free R1R2p accepted an electron from the reduced photosensitizer through proton-coupled electron transfer (PCET) using protons of TEOA dissolved in a CH3CN solution in a CO2 atmosphere as the initial step of the catalytic cycle. Although the mixed system of the nonsubstituted 1,10-phenanthroline generates a stable tris(phenanthroline)-Fe(II) complex in solution, this complex could not function as a CO2 reduction catalyst. The mechanism in which R1R2p interacts with the Fe ion after PCET was proposed for this efficient photocatalytic CO2 reduction. The proposed photocatalytic system using the 2,9-di-sec-butyl-phenanthroline ligand could produce CO with high efficiency (quantum yield of 8.2%) combined with a dinuclear Cu(I) complex as a photosensitizer.

Electrochemical CO2 Reduction by Urea Hangman Mn Terpyridine species

Based on our previous study in chemical subtleties of the proton tunneling distance for metal hydride formation (PTD-MH) to regulate the selectivity of CO2 reduction reaction (CO2RR), we have developed a family of Mn terpyridine derivatives, in which urea groups functions as multipoint hydrogen-bonding hangman to accelerate the reaction rate. We found that such changes to the second coordination sphere significantly increased the turnover frequency (TOF) for CO2 reduction to ca. 360s - 1 ${{s}^{-1}}$ with this family of molecular catalysts while maintaining high selectivity (ca. 100 %±3) for CO even in the presence of a large amount of phenol as proton source. Notably, the compounds studied in this manuscript all exhibit large value fori c a t / i p ${{{\bf i}}_{{\bf c a t}}/{{\bf i}}_{{\bf p}}}$ as that achieved by Fe porphyrins derivates, while saving up to 0.55 V in overpotential with respect to the latter.

Ligand-Bound CO2 as a Nonclassical Route toward Efficient Photocatalytic CO2 Reduction with a Ni N-Confused Porphyrin

Implementing the synergistic effects between the metal and the ligand has successfully streamlined the energetics for CO2 activation and gained high catalytic activities, establishing the important breakthroughs in photocatalytic CO2 reduction. Herein, we describe a Ni(II) N-confused porphyrin complex (NiNCP) featuring an acidic N-H group. It is readily deprotonated and exists in an anion form during catalysis. Owing to this functional site, NiNCP gave rise to an outstanding turnover number (TON) as high as 217,000 with a 98% selectivity for CO2 reduction to CO, while the parent Ni(II) porphyrin (NiTPP) was found to be nearly inactive. Our mechanistic analysis revealed a nonclassical reaction pattern where CO2 was effectively activated via the attack of the Lewis-basic ligand. The resulting ligand-bound CO2 adduct could be further reduced to produce CO. This new metal-ligand synergistic effect is anticipated to inspire the design of highly active catalysts for small molecule activations.

Bioinspired Binickel Catalyst for Carbon Dioxide Reduction: The Importance of Metal-ligand Cooperation

Catalyst design for the efficient CO2 reduction reaction (CO2RR) remains a crucial challenge for the conversion of CO2 to fuels. Natural Ni-Fe carbon monoxide dehydrogenase (NiFe-CODH) achieves reversible conversion of CO2 and CO at nearly thermodynamic equilibrium potential, which provides a template for developing CO2RR catalysts. However, compared with the natural enzyme, most biomimetic synthetic Ni-Fe complexes exhibit negligible CO2RR catalytic activities, which emphasizes the significance of effective bimetallic cooperation for CO2 activation. Enlightened by bimetallic synergy, we herein report a dinickel complex, NiIINiII(bphpp)(AcO)2 (where NiNi(bphpp) is derived from H2bphpp = 2,9-bis(5-tert-butyl-2-hydroxy-3-pyridylphenyl)-1,10-phenanthroline) for electrocatalytic reduction of CO2 to CO, which exhibits a remarkable reactivity approximately 5 times higher than that of the mononuclear Ni catalyst. Electrochemical and computational studies have revealed that the redox-active phenanthroline moiety effectively modulates the electron injection and transfer akin to the [Fe3S4] cluster in NiFe-CODH, and the secondary Ni site facilitates the C-O bond activation and cleavage through electron mediation and Lewis acid characteristics. Our work underscores the significant role of bimetallic cooperation in CO2 reduction catalysis and provides valuable guidance for the rational design of CO2RR catalysts.

Electrocatalytic CO2 Reduction: Monitoring of Catalytically Active, Downgraded, and Upgraded Cobalt Complexes

The premise of most studies on the homogeneous electrocatalytic CO2 reduction reaction (CO2RR) is a good understanding of the reaction mechanisms. Yet, analyzing the reaction intermediates formed at the working electrode is challenging and not always attainable. Here, we present a new, general approach to studying the reaction intermediates applied for CO2RR catalyzed by a series of cobalt complexes. The cobalt complexes were based on the TPA-ligands (TPA = tris(2-pyridylmethyl)amine) modified by amino groups in the secondary coordination sphere. By combining the electrochemical experiments, electrochemistry-coupled electrospray ionization mass spectrometry, with density functional theory (DFT) calculations, we identify and spectroscopically characterize the key reaction intermediates in the CO2RR and the competing hydrogen-evolution reaction (HER). Additionally, the experiments revealed the rarely reported in situ changes in the secondary coordination sphere of the cobalt complexes by the CO2-initiated transformation of the amino substituents to carbamates. This launched an even faster alternative HER pathway. The interplay of three catalytic cycles, as derived from the experiments and supported by the DFT calculations, explains the trends that cobalt complexes exhibit during the CO2RR and HER. Additionally, this study demonstrates the need for a molecular perspective in the electrocatalytic activation of small molecules efficiently obtained by the EC-ESI-MS technique.

Understanding the Interplay of the Brønsted Acidity of Catalyst Ancillary Groups and the Solution Components in Iron-porphyrin-Mediated Carbon Dioxide Reduction

The rapid and efficient conversion of carbon dioxide (CO2) to carbon monoxide (CO) is an ongoing challenge. Catalysts based on iron-porphyrin cores have emerged as excellent electrochemical mediators of the two proton + two electron reduction of CO2 to CO, and many of the design features that promote function are known. Of those design features, the incorporation of Brønsted acids in the second coordination sphere of the iron ion has a significant impact on catalyst turnover kinetics. The Brønsted acids are often in the form of hydroxyphenyl groups. Herein, we explore how the acidity of an ancillary 2-hydroxyphenyl group affects the performance of CO2 reduction electrocatalysts. A series of meso-5,10,15,20-tetraaryl porphyrins were prepared where only the functional group at the 5-meso position has an ionizable proton. A series of cyclic voltammetry (CV) experiments reveal that the complex with -OMe positioned para to the ionizable -OH shows the largest CO2 reduction rate constants in acetonitrile solvent. This is the least acidic -OH of the compounds surveyed. The turnover frequency of the -OMe derivative can be further improved with the addition of 4-trifluoromethylphenol to the solution. In contrast, the iron-porphyrin complex with -CF3 positioned opposite the ionizable -OH shows the smallest CO2 reduction rate constants, and its turnover frequency is less enhanced with the addition of phenols to the reaction solutions. The origin of this effect is rationalized based on kinetic isotope effect experiments and density functional calculations. We conclude that catalysts with weaker internal acids coupled with stronger external acid additives provide superior CO2 reduction kinetics.

Overall reaction mechanism of photocatalytic CO2 reduction on a Re(i)-complex catalyst unit of a Ru(ii)-Re(i) supramolecular photocatalyst

Rhenium(i) complexes fac-[ReI(diimine)(CO)3(L)]n+ are mostly used and evaluated as photocatalysts and catalysts in both photochemical and electrochemical systems for CO2 reduction. However, the selective reduction mechanism of CO2 to CO is unclear, although numerous mechanistic studies have been reported. A Ru(ii)-Re(i) supramolecular photocatalyst with fac-[ReI(diimine)(CO)3{OC(O)OCH2CH2NR2}] (R = C2H4OH) as a catalyst unit (RuC2Re) exhibits very high efficiency, selectivity, and durability of CO formation in photocatalytic CO2 reduction reactions. In this work, the reaction mechanism of photocatalytic CO2 reduction using RuC2Re is fully clarified. Time-resolved IR (TR-IR) measurements using rapid-scan FT-IR spectroscopy with laser flash photolysis verify the formation of RuC2Re(COOH) with a carboxylic acid unit, i.e., fac-[ReI(diimine)(CO)3(COOH)], in the photocatalytic reaction solution. Additionally, this important intermediate is detected in an actual photocatalytic reaction using steady state irradiation. Kinetics analysis of the TR-IR spectra and DFT calculations demonstrated the reaction mechanism of the conversion of the one-electron reduced species of RuC2Re with a fac-[ReI(diimine˙-)(CO)3{OC(O)OCH2CH2NR2}]- unit, which was produced via the photochemical reduction of RuC2Re by 1,3-dimethyl-2-phenyl-2,3-dihydro-1H-benzo[d]imidazole (BIH), to RuC2Re(COOH). The kinetics of the recovery processes of the starting complex RuC2Re from RuC2Re(COOH) accompanying the release of CO and OH- was also clarified. As a side reaction of RuC2Re(COOH), a long-lived carboxylate-ester complex with a fac-[ReI(diimine)(CO)3(COOC2H4NR2)] unit, which was produced by the nucleophilic attack of TEOA to one of the carbonyl ligands of RuC2Re(CO) with a fac-[ReI(diimine)(CO)4]+ unit, was formed during the photocatalytic reaction. This complex works not only as a precursor in another minor CO formation process but also as an external photosensitiser that photochemically reduces the other complexes i.e., RuC2Re, RuC2Re(COOH), and the intermediate that is reductively converted to RuC2Re(COOH).

Mechanistic insights of electrocatalytic CO2 reduction by Mn complexes: synergistic effects of the ligands

The electrocatalytic mechanisms of CO2 reduction catalyzed by pyridine-oxazoline (pyrox)-based Mn catalysts were investigated by DFT calculations. In-depth comparative analyses of pyrox-based and bipyridine-based Mn complexes were carried out. C-OH cleavage is the rate-determining step for both the protonation-first path and the reduction-first path. The free energy of CO2 activation (ΔG1) and the electrons donated by CO ligands in this step are effective descriptors in regulating the C-OH cleavage barrier. The reduction of carboxylate complex 6 (E6) is the potential-determining step for the reduction-first path. Meanwhile, for the protonation-first path, the initial generation (E2) or the regeneration (E8) of active catalyst might be potential-determining. Hirshfeld charge and orbital contribution analysis indicate that E6 is definitely based on the heterocyclic ligand and E2 is related to both the heterocyclic ligand and three CO ligands. Therefore, replacement of the CO ligand by a stronger electron donating ligand can effectively boost the catalytic activity of CO2 reduction without increasing the overpotential in the reduction-first path. This hypothesis is supported by the mechanism calculations of the Mn complex in which the axial CO ligand is replaced by a pyridine or PMe3.

Redox-Active Ligand Assisted Multielectron Catalysis: A Case of Electrocatalyzed CO2-to-CO Conversion

The selective reduction of carbon dioxide remains a significant challenge due to the complex multielectron/proton transfer process, which results in a high kinetic barrier and the production of diverse products. Inspired by the electrostatic and H-bonding interactions observed in the second sphere of the [NiFe]-CODH enzyme, researchers have extensively explored these interactions to regulate proton transfer, stabilize intermediates, and ultimately improve the performance of catalytic CO2 reduction. In this work, a series of cobalt(II) tetraphenylporphyrins with varying numbers of redox-active nitro groups were synthesized and evaluated as CO2 reduction electrocatalysts. Analyses of the redox properties of these complexes revealed a consistent relationship between the number of nitro groups and the corresponding accepted electron number of the ligand at -1.59 V vs. Fc+/0. Among the catalysts tested, TNPPCo with four nitro groups exhibited the most efficient catalytic activity with a turnover frequency of 4.9 × 104 s-1 and a catalytic onset potential 820 mV more positive than that of the parent TPPCo. Furthermore, the turnover frequencies of the catalysts increased with a higher number of nitro groups. These results demonstrate the promising design strategy of incorporating multielectron redox-active ligands into CO2 reduction catalysts to enhance catalytic performance.

Hydrogenation of CO2 by a Bifunctional PC(sp3 )P Iridium(III) Pincer Complex Equipped with Tertiary Amine as a Functional Group

Reversible hydrogen storage in the form of stable and mostly harmless chemical substances such as formic acid (FA) is a cornerstone of a fossil fuels-free economy. In the past, we have reported a primary amine-functionalized bifunctional iridium(III)-PC(sp3 )P pincer complex as a mild and chemoselective catalyst for the additive-free decomposition of neat formic acid. In this manuscript, we report on the successful application of a redesigned complex bearing tertiary amine functionality as a catalyst for mild hydrogenation of CO2 to formic acid. The catalyst demonstrates TON up to 6×104 and TOF up to 1.7×104  h-1 . In addition to the practical value of the catalyst, experimental and computational mechanistic studies provide the rationale for the design of improved next-generation catalysts.

CO2 Activation with Manganese Tricarbonyl Complexes through an H-Atom Responsive Benzimidazole Ligand

Herein, we report the synthesis and characterization of two manganese tricarbonyl complexes, MnI (HL)(CO)3 Br (1 a-Br) and MnI (MeL)(CO)3 Br (1 b-Br) (where HL=2-(2'-pyridyl)benzimidazole; MeL=1-methyl-2-(2'-pyridy)benzimidazole) and assayed their electrocatalytic properties for CO2 reduction. A redox-active pyridine benzimidazole ancillary ligand in complex 1 a-Br displayed unique hydrogen atom transfer ability to facilitate electrocatalytic CO2 conversion at a markedly lower reduction potential than that observed for 1 b-Br. Notably, a one-electron reduction of 1 a-Br yields a structurally characterized H-bonded binuclear Mn(I) adduct (2 a') rather than the typically observed Mn(0)-Mn(0) dimer, suggesting a novel method for CO2 activation. Combining advanced electrochemical, spectroscopic, and single crystal X-ray diffraction techniques, we demonstrate the use of an H-atom responsive ligand may reveal an alternative, low-energy pathway for CO2 activation by an earth-abundant metal complex catalyst.

Effects of proton tunneling distance on CO2 reduction by Mn terpyridine species

Herein, we report two manganese terpyridine dicarbonyl complexes, covalently attached to a proximal (1) or distal (2) amide moiety at the ortho position of the pendent phenyl ring as a proton relay. The isomer 1 achieves a turnover frequency (TOF) of 325 s-1 with a minor overpotential of ca. 200 mV. The performance ranks it among the most efficient molecular catalysts for CO2-to-CO conversion, and it is ca.2 orders faster than isomer 2.

Rational design of co-ordination compounds in combination of bipyridine type of ligands and group 7 metal (M = Mn, Re) for photoCORM: a DFT study

CONTEXT

A large number of manganese and rhenium tricarbonyl complexes are known in literature along with various applications in different fields. CO-releasing molecules (CORMs) got recent research attention because CO can act as a prodrug for different diseases. CORMs offer the promising prospect of a safe and controllable amount of CO release. In this research work, we have explored the electronic properties of compounds such as bipyridine-related [Mn(CO)3] and [Re(CO)3] and we have compared the electronic properties of both manganese and rhenium tricarbonyl complexes in the light of carbon monoxide releasing tendency. The chosen Mn and Re metals have enough possibility to vary or play with ligands and design a new and novel CORM molecule. In this context, we have taken a range of 4,4'-disubstituted 2,2' bipyridyl ligands (Rbpy, where R = NH2, tBu, OCH3, H, CF3, CN, NO2) to investigate CO's liberation ability to identify and study such molecules. The calculated absorbance of designed complexes (1-14) shows visible/near-IR region (350-850 nm). The HOMO-LUMO energy gap of 7 (ΔE=2.40 eV) complex and for complex 14 (ΔE=2.28 eV) which is lesser in all complexes but the MLCT percentage is greater in Mn tricarbonyl complexes in comparison to Re tricarbonyl complexes. The calculated results of the FMO approach revealed that complex 7 and 14 have the lowest energy gap which is also in good agreement with DOSs and TDM results. The theoretically calculated results revealed that the both Mn and Re tricarbonyl complexes have a tendency for labialization of CO, but Mn tricarbonyl complexes are more prone to CO release because they have higher MLCT percentage.

METHODS

In this research work, we have performed density functional theory (DFT) calculations to explore the physical properties of compounds such as bipyridine-related [Mn(CO)3] and [Re(CO)3] and we have compared the physical properties of both manganese and rhenium tricarbonyl complexes in the light of carbon monoxide releasing tendency. DFT-based calculations were performed by using B3LYP/LANL2DZ basis set followed by acetonitrile solvent using the conductor-like polarizable continuum model (CPCM) for different calculations. Various geometrical calculations were performed using the Gaussian16 suite of programs and the output results obtained from Gaussian16 were visualized using GaussView 5.0.16. The same level of theory was used for various calculations, including frontier molecular orbital (FMO) analysis, metal to ligand charge transfer (MLCT), density of state (DOS) calculations, and transition density of matrix (TDM) calculations. For specific calculations, GaussSum 2.2 software package was used to calculate the density of states, and the Multiwfn 3.8 program was used to analyze the transition density matrix, which is presented using heat maps for both electrons and holes.

Exploring the Parameters Controlling Product Selectivity in Electrochemical CO2 Reduction in Competition with Hydrogen Evolution Employing Manganese Bipyridine Complexes

Selective reduction of CO₂ is an efficient solution for producing nonfossil-based chemical feedstocks and simultaneously alleviating the increasing atmospheric concentration of this greenhouse gas. With this aim, molecular electrocatalysts are being extensively studied, although selectivity remains an issue. In this work, a combined experimental-computational study explores how the molecular structure of Mn-based complexes determines the dominant product in the reduction of CO₂ to HCOOH, CO, and H₂. In contrast to previous Mn(bpy-R)(CO)₃Br catalysts containing alkyl amines in the vicinity of the Br ligand, here, we report that bpy-based macrocycles locking these amines at the side opposite to the Br ligand change the product selectivity from HCOOH to H₂. Ab initio molecular dynamics simulations of the active species showed that free rotation of the Mn(CO)₃ moiety allows for the approach of the protonated amine to the reactive center yielding a Mn-hydride intermediate, which is the key in the formation of H₂ and HCOOH. Additional studies with DFT methods showed that the macrocyclic moiety hinders the insertion of CO₂ to the metal hydride favoring the formation of H₂ over HCOOH. Further, our results suggest that the minor CO product observed experimentally is formed when CO₂ adds to Mn on the side opposite to the amine ligand before protonation. These results show how product selectivity can be modulated by ligand design in Mn-based catalysts, providing atomistic details that can be leveraged in the development of a fully selective system.

Analyzing Structure-Activity Variations for Mn-Carbonyl Complexes in the Reduction of CO2 to CO

Contemporary electrocatalysts for the reduction of CO₂ often suffer from low stability, activity, and selectivity, or a combination thereof. Mn-carbonyl complexes represent a promising class of molecular electrocatalysts for the reduction of CO₂ to CO as they are able to promote this reaction at relatively mild overpotentials, whereby rare-earth metals are not required. The electronic and geometric structure of the reaction center of these molecular electrocatalysts is precisely known and can be tuned via ligand modifications. However, ligand characteristics that are required to achieve high catalytic turnover at minimal overpotential remain unclear. We consider 55 Mn-carbonyl complexes, which have previously been synthesized and characterized experimentally. Four intermediates were identified that are common across all catalytic mechanisms proposed for Mn-carbonyl complexes, and their structures were used to calculate descriptors for each of the 55 Mn-carbonyl complexes. These electronic-structure-based descriptors encompass the binding energies, the highest occupied and lowest unoccupied molecular orbitals, and partial charges. Trends in turnover frequency and overpotential with these descriptors were analyzed to afford meaningful physical insights into what ligand characteristics lead to good catalytic performance, and how this is affected by the reaction conditions. These insights can be expected to significantly contribute to the rational design of more active Mn-carbonyl electrocatalysts.

Chirality-Guided Isomerization of Mn2S2 Diamond Core Complexes: A Mechanistic Study

Occasioned by the discovery of a ligand transfer from M(N₂S₂) to Mn^I in Mn(CO)₅Br, the resulting H₂N₂S₂ ligand-tethered dimanganese complex, (μ₄-N,N'-ethylenebis(mercaptoacetamide))[Mn₂(CO)₆], was found to have myriad analogues of the type (μ-S-E)₂[Mn₂(CO)₆], making up an under-studied class containing Mn₂S₂ rhombs. The attempt to synthesize a nontethered version resulted in a solid-state structure in an anti-conformation. However, a direct comparison of the Fourier-transform infrared spectra of the tethered versus nontethered complexes in combination with theoretical frequency calculation suggested the coexistence of syn- and anti-isomers and their interconversion in solution. Analysis of the syn- versus anti-version of the dimanganese components led to the understanding that whereas the anti-form exists as centrosymmetric RS isomers, the syn-form is restricted by C₂ symmetry to be either RR or SS. Molecular scrambling experiments indicated monomeric, pentacoordinate, 16-e^- (S-O)Mn(CO)₃ intermediates with lifetimes sufficiently long to sample R and S monomers. Density functional theory analysis of the mechanistic pathway and a kinetic study corroborated that the proposed isomerization involves the cleavage and reformation of the dimeric structures.

Steric and Lewis Basicity Influence of the Second Coordination Sphere on Electrocatalytic CO2 Reduction by Manganese Bipyridyl Complexes

This study aims to provide a greater insight into the balance between steric (bpy vs (Ph)₂bpy vs mes₂bpy ligands) and Lewis basic ((Ph)₂bpy vs (MeOPh)₂bpy vs (MeSPh)₂bpy ligands) influence on the efficiencies of the protonation-first vs reduction-first CO₂ reduction mechanisms with [Mn^I(R₂bpy)(CO)₃(CH₃CN)]⁺ precatalysts, and on their respective transition-state geometries/energies for rate-determining C-OH bond cleavage toward CO evolution. The presence of only modest steric bulk at the 6,6'-diphenyl-2,2'-bipyridyl ((Ph)₂bpy) ligand has here allowed unique insight into the mechanism of catalyst activation and CO₂ binding by navigating a perfect medium between the nonsterically encumbered bpy-based and the highly sterically encumbered mes₂bpy-based precatalysts. Cyclic voltammetry conducted in CO₂-saturated electrolyte for the (Ph)₂bpy-based precatalyst [2-CH₃CN]⁺ confirms that CO₂ binding occurs at the two-electron-reduced activated catalyst [2]^- in the absence of an excess proton source, in contrast to prior assumptions that all manganese catalysts require a strong acid for CO₂ binding. This observation is supported by computed free energies of the parent-child reaction for [Mn-Mn]⁰ dimer formation, where increased steric hindrance relative to the bpy-based precatalyst correlates with favorable CO₂ binding. A critical balance must be adhered to, however, as the absence of steric bulk in the bpy-based precatalyst [1-CH₃CN]⁺ maintains a lower overpotential than [2-CH₃CN]⁺ at the protonation-first pathway with comparable kinetic performance, whereas an ∼2-fold greater TOF_max is observed at its reduction-first pathway with an almost identical overpotential as [2-CH₃CN]⁺. Notably, excessive steric bulk in the mes₂bpy-based precatalyst [3-CH₃CN]⁺ results in increased activation free energies of the C-OH bond cleavage transition states for both the protonation-first and the reduction-first pathways relative to both [1-CH₃CN]⁺ and [2-CH₃CN]⁺. In fact, [3-CH₃CN]⁺ requires a 1 V window beyond its onset potential to reach its peak catalytic current, which is in contrast to the narrower (<0.30 V) potential response window of the remaining catalysts here studied. Voltammetry recorded under 1 atm of CO₂ with 2.8 M (5%) H₂O establishes [2-CH₃CN]⁺ to have the lowest overpotential (η = 0.75 V) in the series here studied, attributed to its ability to lie "on the fence" when providing sufficient steric bulk to hinder (but not prevent) [Mn-Mn]⁰ dimerization, while simultaneously having a limited steric impact on the free energy of activation for the rate-determining C-OH bond cleavage transition state. While the methoxyphenyl bpy-based precatalyst [4-CH₃CN]⁺ possesses an increased steric presence relative to [2-CH₃CN]⁺, this is offset by its capacity to stabilize the C-OH bond cleavage transition states of both the protonation-first and the reduction-first pathways by facilitating second coordination sphere H-bonding stabilization.

Coupling Pulse Radiolysis with Nanosecond Time-Resolved Step-Scan Fourier Transform Infrared Spectroscopy: Broadband Mid-Infrared Detection of Radiolytically Generated Transients

We describe the first implementation of broadband, nanosecond time-resolved step-scan Fourier transform infrared (S²-FT-IR) spectroscopy at a pulse radiolysis facility. This new technique allows the rapid acquisition of nano- to microsecond time-resolved infrared (TRIR) spectra of transient species generated by pulse radiolysis of liquid samples at a pulsed electron accelerator. Wide regions of the mid-infrared can be probed in a single experiment, which often takes < 20-30 min to complete. It is therefore a powerful method for rapidly locating the IR absorptions of short-lived, radiation-induced species in solution, and for directly monitoring their subsequent reactions. Time-resolved step-scan FT-IR detection for pulse radiolysis thus complements our existing narrowband quantum cascade laser-based pulse radiolysis-TRIR detection system, which is more suitable for acquiring single-shot kinetics and narrowband TRIR spectra on small-volume samples and in strongly absorbing solvents, such as water. We have demonstrated the application of time-resolved step-scan FT-IR spectroscopy to pulse radiolysis by probing the metal carbonyl and organic carbonyl vibrations of the one-electron-reduced forms of two Re-based CO₂ reduction catalysts in acetonitrile solution. Transient IR absorption bands with amplitudes on the order of 1 × 10^-3 are easily detected on the sub-microsecond timescale using electron pulses as short as 250 ns.

Dual electronic effects achieving a high-performance Ni(II) pincer catalyst for CO2 photoreduction in a noble-metal-free system

A carbazolide-bis(NHC) Ni^II catalyst (1; NHC, N-heterocyclic carbene) for selective CO₂ photoreduction was designed herein by a one-stone-two-birds strategy. The extended π-conjugation and the strong σ/π electron-donation characteristics (two birds) of the carbazolide fragment (one stone) lead to significantly enhanced activity for photoreduction of CO₂ to CO. The turnover number (TON) and turnover frequency (TOF) of 1 were ninefold and eightfold higher than those of the reported pyridinol-bis(NHC) Ni^II complex at the same catalyst concentration using an identical Ir photosensitizer, respectively, with a selectivity of ∼100%. More importantly, an organic dye was applied to displace the Ir photosensitizer to develop a noble-metal-free photocatalytic system, which maintained excellent performance and obtained an outstanding quantum yield of 11.2%. Detailed investigations combining experimental and computational studies revealed the catalytic mechanism, which highlights the potential of the one-stone-two-birds effect.

A Mesoionic Carbene-Pyridine Bidentate Ligand That Improves Stability in Electrocatalytic CO2 Reduction by a Molecular Manganese Catalyst

Tricarbonyl Group 7 complexes have a longstanding history as efficacious CO₂ electroreduction catalysts. Typically, these complexes feature an auxiliary 2,2'-bipyridine ligand that assists in redox steps by delocalizing the electron density into the ligand orbitals. While this feature lends to an accessible redox potential for CO₂ electroreduction, it also presents challenges for electrocatalysis with Mn because the electron density is removed from metal-ligand bonding orbitals. The results presented here thus introduce a mesoionic carbene (MIC) as a potent ligand platform to promote Mn-based electrocatalysis. The strong σ donation of the N,C-bidentate MIC is shown to help centralize the electron density on the Mn center while also maintaining relevant redox potentials for CO₂ electroreduction. Mechanistic investigation supports catalytic turnover at two operative potentials separated by 400 mV. In the low operating potential regime at -1.54 V, Mn(0) species catalyze CO₂ to CO and CO₃^2-, which has a maximum rate of 7 ± 5 s^-1 and is stable for up to 30.7 h. At higher operating potential at -1.94 V, "Mn(-1)" catalyzes CO₂ to CO and H₂O with faster turnovers of 200 ± 100 s^-1, with the trade-off being less stability at 6.7 h. The relative stabilities of Mn complexes bearing MIC and 4,4'-di-tert-butyl-2,2'-bipyridine were compared by evaluation under the same electrolysis conditions and therefore elucidated that the MIC promotes longevity for CO evolution throughout a 5 h period.

Photocatalytic Reduction of CO2 to CO in Aqueous Solution under Red-Light Irradiation by a Zn-Porphyrin-Sensitized Mn(I) Catalyst

This work demonstrates photocatalytic CO₂ reduction by a noble-metal-free photosensitizer-catalyst system in aqueous solution under red-light irradiation. A water-soluble Mn(I) tricarbonyl diimine complex, [MnBr(4,4′-{Et₂O₃PCH₂}₂-2,2′-bipyridyl)(CO)₃] (1), has been fully characterized, including single-crystal X-ray crystallography, and shown to reduce CO₂ to CO following photosensitization by tetra(N-methyl-4-pyridyl)porphyrin Zn(II) tetrachloride [Zn(TMPyP)]Cl₄ (2) under 625 nm irradiation. This is the first example of 2 employed as a photosensitizer for CO₂ reduction. The incorporation of −P(O)(OEt)₂ groups, decoupled from the core of the catalyst by a −CH₂– spacer, afforded water solubility without compromising the electronic properties of the catalyst. The photostability of the active Mn(I) catalyst over prolonged periods of irradiation with red light was confirmed by ¹H and ¹³C{¹H} NMR spectroscopy. This first report on Mn(I) species as a homogeneous photocatalyst, working in water and under red light, illustrates further future prospects of intrinsically photounstable Mn(I) complexes as solar-driven catalysts in an aqueous environment.

A Mn(I) bipyridyl tricarbonyl complex, where the diimine ligand is functionalized with water-solubilizing phosphonate ester groups, has been prepared and is shown to catalytically convert CO₂ to CO in aqueous solution following photosensitization from a water-soluble Zn(II) porphyrin under red-light irradiation.

Manganese Carbonyl Complexes as Selective Electrocatalysts for CO2 Reduction in Water and Organic Solvents

The electrochemical reduction of CO₂ provides a way to sustainably generate carbon-based fuels and feedstocks. Molecular CO₂ reduction electrocatalysts provide tunable reaction centers offering an approach to control the selectivity of catalysis. Manganese carbonyl complexes, based on [Mn(bpy)(CO)₃Br] and its derivatives (bpy = 2,2′-bipyridine), are particularly interesting due to their ease of synthesis and the use of a first-row earth-abundant transition metal. [Mn(bpy)(CO)₃Br] was first shown to be an active and selective catalyst for reducing CO₂ to CO in organic solvents in 2011. Since then, manganese carbonyl catalysts have been widely studied with numerous reports of their use as electrocatalysts and photocatalysts and studies of their mechanism.

This class of Mn catalysts only shows CO₂ reduction activity with the addition of weak Brønsted acids. Perhaps surprisingly, early reports showed increased turnover frequencies as the acid strength is increased without a loss in selectivity toward CO evolution. It may have been expected that the competing hydrogen evolution reaction could have led to lower selectivity. Inspired by these works we began to explore if the catalyst would work in protic solvents, namely, water, and to explore the pH range over which it can operate. Here we describe the early studies from our laboratory that first demonstrated the use of manganese carbonyl complexes in water and then go on to discuss wider developments on the use of these catalysts in water, highlighting their potential as catalysts for use in aqueous CO₂ electrolyzers.

Key to the excellent selectivity of these catalysts in the presence of Brønsted acids is a proton-assisted CO₂ binding mechanism, where for the acids widely studied, lower pK_a values actually favor CO₂ binding over Mn–H formation, a precursor to H₂ evolution. Here we discuss the wider literature before focusing on our own contributions in validating this previously proposed mechanism through the use of vibrational sum frequency generation (VSFG) spectroelectrochemistry. This allowed us to study [Mn(bpy)(CO)₃Br] while it is at, or near, the electrode surface, which provided a way to identify new catalytic intermediates and also confirm that proton-assisted CO₂ binding operates in both the “dimer” and primary (via [Mn(bpy)(CO)₃]⁻) pathways. Understanding the mechanism of how these highly selective catalysts operate is important as we propose that the Mn complexes will be valuable models to guide the development of new proton/acid tolerant CO₂ reduction catalysts.

Understanding the Role of Inter- and Intramolecular Promoters in Electro- and Photochemical CO2 Reduction Using Mn, Re, and Ru Catalysts

Recycling of carbon dioxide to fuels and chemicals is a promising strategy for renewable energy storage. Carbon dioxide conversion can be achieved by (i) artificial photosynthesis using photoinduced electrons; (ii) electrolysis using electricity produced by photovoltaics; and (iii) thermal CO₂ hydrogenation using renewable H₂. The focus of our group's research is on molecular catalysts, in particular coordination complexes of transition metals (e.g., Mn, Re, and Ru), which offer versatile platforms for mechanistic studies of photo- and electrochemical CO₂ reduction. The interactions of catalytic intermediates with Lewis or Brønsted acids, hydrogen-bonding moieties, solvents, cations, etc., that function as promoters or cofactors have become increasingly important for efficient catalysis. These interactions may have dramatic effects on selectivity and rates by stabilizing intermediates or lowering transition state barriers, but they are difficult to elucidate and challenging to predict. We have been carrying out experimental and theoretical studies of CO₂ reduction using molecular catalysts toward addressing mechanisms of efficient CO₂ reduction systems with emphasis on those containing intramolecular (or pendent) and intermolecular (solution phase) additives. This Account describes the identification of reaction intermediates produced during CO₂ reduction in the presence of triethanolamine or ionic liquids, the benefits of hydrogen-bonding interactions among intermediates or cofactors, and the complications of pendent phenolic donors/phenoxide bases under electrochemical conditions.Triethanolamine (TEOA) is a common sacrificial electron donor for photosensitizer excited state reductive quenching and has a long history of use in photocatalytic CO₂ reduction. It also functions as a Brønsted base in conjunction with more potent sacrificial electron donors, such as 1,3-dimethyl-2-phenyl-2,3-dihydro-1H-benzo[d]imidazole (BIH). Deprotonation of the BIH^•+ cation radical promotes irreversible photoinduced electron transfer by preventing charge recombination. Despite its wide use, most research to date has not considered the broader reactions of TEOA, including its direct interaction with CO₂ or its influence on catalytic intermediates. We found that in acetonitrile, TEOA captures CO₂ in the form of a zwitterionic adduct without any metal catalyst. In the presence of ruthenium carbonyl catalysts bearing α-diimine ligands, it participates in metal hydride formation, accelerates hydride transfer to CO₂ to form the bound formate intermediate, and assists in the dissociation of formate anion from the catalyst ( J. Am. Chem. Soc. 2020, 142, 2413-2428).Hydrogen bonding and acid/base promoters are understood to interact with key catalytic intermediates, such as the metallocarboxylate or metallocarboxylic acid during CO₂ reduction. The former is a high energy species, and hydrogen-bonding or Lewis acid-stabilization are beneficial. We have found that imidazolium-based ionic liquid cations can stabilize the doubly reduced form of the [ReCl(bpy)(CO)₃] (bpy = 2,2'-bipyridine) electrocatalyst through both hydrogen-bonding and π-π interactions, resulting in CO₂ reduction occurring at a more positive potential with a higher catalytic current ( J. Phys. Chem. Lett. 2014, 5, 2033-2038). Hydrogen bonding interactions between Lewis basic methoxy groups in the second coordination sphere of a Mn-based catalyst and the OH group of the Mn-COOH intermediate in the presence of a Brønsted acid were also found to promote C-(OH) bond cleavage, enabling access to a low-energy protonation-first pathway for CO₂ reduction ( J. Am. Chem. Soc. 2017, 139, 2604-2618).The kinetics of forming the metallocarboxylic acid can be enhanced by internal acids, and its proton-induced C-OH bond cleavage to the metallocarbonyl and H₂O is often the rate-limiting step. Therefore, proton movement organized by pendent hydrogen-bonding networks may also accelerate this step. In contrast, during electrolysis, OH groups in the second coordination sphere are deprotonated to the oxyanions, which deter catalytic CO₂ reduction by directly binding CO₂ to form the carbonate or by making an M-O bond in competition with CO₂ binding ( Inorg. Chem. 2016, 55, 4582-4594). Our results emphasize that detailed mechanistic research is critical in discovering the design principles for improved catalysts.

Switching Catalyst Selectivity via the Introduction of a Pendant Nitrophenyl Group

The conversion of abundant small molecules to value-added products serves as an attractive method to store renewable energy in chemical bonds. A family of macrocyclic cobalt aminopyridine complexes was previously reported to reduce CO₂ to CO with 98% faradaic efficiency through the formation of hydrogen-bonding networks and with the number of secondary amines affecting catalyst performance. One of these aminopyridine macrocycles, (NH)₁(NMe)₃-bridged calix[4]pyridine (L⁵), was modified with a nitrophenyl group to form L^NO2 and metalated with a cobalt(II) precursor to generate CoL^NO2, which would allow for probing the positioning and steric effects on catalysis. The addition of a nitrophenyl moiety to the ligand backbone results in a drastic shift in selectivity. Large current increases in the presence of added protons and CoL^NO2 are observed under both N₂ and CO₂. The current increases under N₂ are ∼30 times larger than the ones under CO₂, suggesting a change in the selectivity of CoL^NO2 to favor H₂ production versus CO₂ reduction. H₂ is determined to be the dominant reduction product by gas chromatography, reaching faradaic efficiencies up to 76% under N₂ with TFE and 71% under CO₂ with H₂O, in addition to small amounts of formate. X-ray photoelectron spectroscopy (XPS) reveals the presence of a cobalt-containing heterogeneous deposit on the working electrode surface, indicating the addition of the nitrophenyl group reduces the electrochemical stability of the catalyst. These observed catalytic behaviors are demonstrably different relative to the tetra-NH bridged macrocycle, which shows 98% faradaic efficiency for CO₂-to-CO conversion with TFE, highlighting the importance of pendant hydrogen bond donors and electrochemically robust functional groups for selective CO₂ conversion.

Strategies for Breaking Molecular Scaling Relationships for the Electrochemical CO2 Reduction Reaction

The electrocatalytic CO2 reduction reaction (CO2RR) is a promising strategy for converting CO2 to fuels and value-added chemicals using renewable energy sources. Molecular electrocatalysts show promise for the selective conversion...

Electronic structure analysis of electrochemical CO2 reduction by iron-porphyrins reveals basic requirements to design catalysts bearing non-innocent ligands

Electrocatalytic CO2 reduction is a possible solution to the increasing CO2 concentration in the earth atmosphere, because it enables storage of energy while using the harmful CO2 feedstock as starting...

Promoting Selective Generation of Formic Acid from CO2 Using Mn(bpy)(CO)3Br as Electrocatalyst and Triethylamine/Isopropanol as Additives

Urgent solutions are needed to efficiently convert the greenhouse gas CO₂ into higher-value products. In this work, fac-Mn(bpy)(CO)₃Br (bpy = 2,2'-bipyridine) is employed as electrocatalyst in reductive CO₂ conversion. It is shown that product selectivity can be shifted from CO toward HCOOH using appropriate additives, i.e., Et₃N along with iPrOH. A crucial aspect of the strategy is to outrun the dimer-generating parent-child reaction involving fac-Mn(bpy)(CO)₃Br and [Mn(bpy)(CO)₃]^- and instead produce the Mn hydride intermediate. Preferentially, this is done at the first reduction wave to enable formation of HCOOH at an overpotential as low as 260 mV and with faradaic efficiency of 59 ± 1%. The latter may be increased to 71 ± 3% at an overpotential of 560 mV, using 2 M concentrations of both Et₃N and iPrOH. The nature of the amine additive is crucial for product selectivity, as the faradaic efficiency for HCOOH formation decreases to 13 ± 4% if Et₃N is replaced with Et₂NH. The origin of this difference lies in the ability of Et₃N/iPrOH to establish an equilibrium solution of isopropyl carbonate and CO₂, while with Et₂NH/iPrOH, formation of the diethylcarbamic acid is favored. According to density-functional theory calculations, CO₂ in the former case can take part favorably in the catalytic cycle, while this is less opportune in the latter case because of the CO₂-to-carbamic acid conversion. This work presents a straightforward procedure for electrochemical reduction of CO₂ to HCOOH by combining an easily synthesized manganese catalyst with commercially available additives.

Effects of Protonation State on Electrocatalytic CO2 Reduction by a Cobalt Aminopyridine Macrocyclic Complex

A critical component in the reduction of CO₂ to CO and H₂O is the delivery of 2 equiv of protons and electrons to the CO₂ molecule. The timing and sequencing of these proton and electron transfer steps are essential factors in directing the activity and selectivity for catalytic CO₂ reduction. In previous studies, we have reported a series of macrocyclic aminopyridine cobalt complexes capable of reducing CO₂ to CO with high faradaic efficiencies. Kinetic investigations reveal a relationship between the observed rate constant (k_obs) and the number of pendant amine hydrogen bond donors minus one, suggesting the presence of a deprotonated active catalytic state. Herein, we investigate the feasibility of these proposed deprotonated complexes toward CO₂ reduction. Two deprotonated derivatives, Co(L^4-) and Co(L^2-), of the tetraamino macrocycle Co(L) were independently synthesized and structurally characterized revealing extensive delocalization of the negative charge upon deprotonation. ¹H nuclear magnetic resonance spectroscopy and ultraviolet-visible titration studies confirm that under catalytic conditions, the active form of the catalyst gradually becomes deprotonated, supporting thus the n_donor - 1 relationship with k_obs. Electrochemical studies of Co(L^4-) reveal that this deprotonated analogue is competent for electrocatalysis upon addition of an exogenous weak acid source, such as 2,2,2-trifluoroethanol, resulting in faradaic efficiencies for CO₂-to-CO conversion identical to those observed with the fully protonated derivative (>98%).

Multiple-Site Concerted Proton-Electron Transfer in a Manganese-Based Complete Functional Model for [FeFe]-Hydrogenase

The active site of [FeFe]-hydrogenase (H₂ ase) is preorganized with an amine (azadithiolate) as a proton relay and a [4Fe4S] subunit as an electron reservoir, which together lower the overpotential for proton reduction and hydrogen oxidation by multiple-site concerted proton-electron transfer (MS-CPET). Herein, we report a mononuclear manganese complex, fac-[Mn(CO)₃ (6-(2-hydroxyphenol)-2-pyridine-2-quinoline) Br] (1), as a rare model to fully mimic the functions of the H₂ ase. In 1, a redox-active bidentate ligand with a pendent phenol replicates the roles of the electron reservoir and the proton relay in the enzyme. Experimental and theoretical studies revealed two consecutive MS-CPET processes in the catalytic cycle, in each of which an electron stored in the reductive ligand and a proton at the proximal phenol moiety are transferred to the Mn center in a concerted way. By virtue of this mechanism, complex 1 exhibited a low overpotential comparable to that of natural enzyme in electrochemical hydrogen production using phenol as a proton source.

Homogeneous molecular catalysis of the electrochemical reduction of N2O to N2: redox vs. chemical catalysis

Homogeneous electrochemical catalysis of N₂O reduction to N₂ is investigated with a series of organic catalysts and rhenium and manganese bipyridyl carbonyl complexes. An activation-driving force correlation is revealed with the organic species characteristic of a redox catalysis involving an outer-sphere electron transfer from the radical anions or dianions of the reduced catalyst to N₂O. Taking into account the previously estimated reorganization energy required to form the N₂O radical anions leads to an estimation of the N₂O/N₂O˙⁻ standard potential in acetonitrile electrolyte. The direct reduction of N₂O at a glassy carbon electrode follows the same quadratic activation driving force relationship. Our analysis reveals that the catalytic effect of the mediators is due to a smaller reorganization energy of the homogeneous electron transfer than that of the heterogeneous one. The physical effect of “spreading” electrons in the electrolyte is shown to be unfavorable for the homogeneous reduction. Importantly, we show that the reduction of N₂O by low valent rhenium and manganese bipyridyl carbonyl complexes is of a chemical nature, with an initial one-electron reduction process associated with a chemical reaction more efficient than the simple outer-sphere electron transfer process. This points to an inner-sphere mechanism possibly involving partial charge transfer from the low valent metal to the binding N₂O and emphasizes the differences between chemical and redox catalytic processes.

Homogeneous electrochemical catalysis of N₂O reduction to N₂ is investigated with a series of organic catalysts and rhenium and manganese bipyridyl carbonyl complexes.

Enhancement of electrocatalytic abilities toward CO2 reduction by tethering redox-active metal complexes to the active site

Tethering metal complexes, like [Ru(bpy)₂Cl₂] (bpy = 2,2'-bipyridine), which are redox-active at low reduction potentials and have the ability to transfer electrons to another complex, to a [Ni(cyclen)]²⁺ electrocatalyst enhanced the reduction of CO₂ to CO at low overpotentials. The [Ni(cyclen)]²⁺ electrocatalyst was modified by tethering redox-active metal complexes via 4-methylpyridyl linkers. The redox-active metal complexes were reduced after CO₂ bound to the active site. In controlled potential electrolysis (CPE) experiments in 95 : 5 (v/v) CH₃CN/H₂O, [{([Ru]pic)₄cyclen}NiCl]⁵⁺ ([Ru]⁺ = {Ru(bpy)₂Cl}⁺; pic = 4-methylpyridyl) could be used to reduce CO₂ into CO at a turnover frequency (TOF) of 708 s^-1 with a faradaic efficiency (FE) of 80% at an onset potential of -1.60 V vs. NHE. At the same time, this electrocatalyst was active at an onset potential of -1.25 V vs. NHE, which is the reduction potential of one of the bpy ligands of the [Ru]⁺ moieties, with FE = 84% and TOF = 178 s^-1. When the electrocatalysis was performed using [bn₄cyclenNiCl]Cl (bn = benzyl) without tethered redox-active metal complexes, the TOF value was determined to be 8 s^-1 with FE = 77% at an onset potential of -1.45 V vs. NHE. The results show that tethering redox-active metal complexes significantly improves the electrocatalytic activities by lowering the potential needed to reduce CO₂.

Secondary Coordination Effect on Monobipyridyl Ru(II) Catalysts in Photochemical CO2 Reduction: Effective Proton Shuttle of Pendant Brønsted Acid/Base Sites (OH and N(CH3)2) and Its Mechanistic Investigation

While the incorporation of pendant Brønsted acid/base sites in the secondary coordination sphere is a promising and effective strategy to increase the catalytic performance and product selectivity in organometallic catalysis for CO₂ reduction, the control of product selectivity still faces a great challenge. Herein, we report two new trans(Cl)-[Ru(6-X-bpy)(CO)₂Cl₂] complexes functionalized with a saturated ethylene-linked functional group (bpy = 2,2'-bipyridine; X = -(CH₂)₂-OH or -(CH₂)₂-N(CH₃)₂) at the ortho(6)-position of bpy ligand, which are named Ru-bpy^OH and Ru-bpy^diMeN, respectively. In the series of photolysis experiments, compared to nontethered case, the asymmetric attachment of tethering ligand to the bpy ligand led to less efficient but more selective formate production with inactivation of CO₂-to-CO conversion route during photoreaction. From a series of in situ FTIR analyses, it was found that the Ru-formate intermediates are stabilized by a highly probable hydrogen bonding between pendent proton donors (-diMeN⁺H or -OH) and the oxygen atom of metal-bound formate (Ru^I-OCHO···H-E-(CH₂)₂-, E = O or diMeN⁺). Under such conformation, the liberation of formate from the stabilized Ru^I-formate becomes less efficient compared to the nontethered case, consequently lowering the CO₂-to-formate conversion activities during photoreaction. At the same time, such stabilization of Ru-formate species prevents the dehydration reaction route (η¹-OCHO → η¹-COOH on Ru metal) which leads toward the generation of Ru-CO species (key intermediate for CO production), eventually leading to the reduction of CO₂-to-CO conversion activity.

Activating the Fe(I) State of Iron Porphyrinoid with Second-Sphere Proton Transfer Residues for Selective Reduction of CO2 to HCOOH via Fe(III/II)-COOH Intermediate(s)

The ability to tune the selectivity of CO₂ reduction by first-row transition metal-based complexes via the inclusion of second-sphere effects heralds exciting and sought-after possibilities. On the basis of the mechanistic understanding of CO₂ reduction by iron porphyrins developed by trapping and characterizing the intermediates involved ( J. Am. Chem. Soc. 2015, 137, 11214), a porphyrinoid ligand is envisaged to switch the selectivity of the iron porphyrins by reducing CO₂ from CO to HCOOH as well as lower the overpotential to the process. The results show that the iron porphyrinoid designed can catalyze the reduction of CO₂ to HCOOH using water as the proton source with 97% yield with no detectable H₂ or CO. The iron porphyrinoid can activate CO₂ in its Fe(I) state resulting in very low overpotential for CO₂ reduction in contrast to all reported iron porphyrins, which can reduce CO₂ in their Fe(0) state. Intermediates involved in CO₂ reduction, Fe(III)-COOH and a Fe(II)-COOH, are identified with in situ FTIR-SEC and subsequently chemically generated and characterized using FTIR, resonance Raman, and Mössbauer spectroscopy. The mechanism of the reaction helps elucidate a key role played by a closely placed proton transfer residue in aiding CO₂ binding to Fe(I), stabilizing the intermediates, and determining the fate of a rate-determining Fe(II)-COOH intermediate.