Helical Self-Assembly-Induced Singlet-Triplet Emissive Switching in a Mechanically Sensitive System

Narrowband Organic/Inorganic Hybrid Afterglow Materials

Narrowband afterglow materials display interesting functions in high-quality anti-counterfeiting and multiplexed bioimaging. However, there is still a limited exploration of these afterglow materials, especially for those with a full width at half maxima (FWHM) around 30 nm. Here, we report the fabrication of narrowband organic/inorganic hybrid afterglow materials via energy transfer technology. Coronene (Cor) with a long phosphorescence feature and broad phosphorescence band is selected as the donor for energy transfer, and inorganic quantum dots (QDs) of CdSe/ZnS with a narrowband emission are used as acceptors. Upon doping into the organic matrix, the resultant three-component materials exhibit a narrowband afterglow with an afterglow lifetime of approximately 3.4 s and an FWHM of 31 nm. The afterglow wavelength of the afterglow materials can be controlled by the QDs. This work based on organic/inorganic hybrids provides a facile approach for developing multicolor and narrowband afterglow materials, as well as opens a new way for expanding the features of organic afterglow for multifunctional applications. It is expected to rely on narrowband afterglow emitters to solve the "spectrum congestion" problem of high-density information storage in optical anti-counterfeiting and information encryption.

Enhancing Purely Organic Room Temperature Phosphorescence via Supramolecular Self-Assembly

Long-lived and highly efficient room temperature phosphorescence (RTP) materials are in high demand for practical applications in lighting and display, security signboards, and anti-counterfeiting. Achieving RTP in aqueous solutions, near-infrared (NIR) phosphorescence emission, and NIR-excited RTP are crucial for applications in bio-imaging, but these goals pose significant challenges. Supramolecular self-assembly provides an effective strategy to address the above problems. This review focuses on the recent advances in the enhancement of RTP via supramolecular self-assembly, covering four key aspects: small molecular self-assembly, cocrystals, the self-assembly of macrocyclic hosts and guests, and multi-stage supramolecular self-assembly. This review not only highlights progress in these areas but also underscores the prominent challenges associated with developing supramolecular RTP materials. The resulting strategies for the development of high-performance supramolecular RTP materials are discussed, aiming to satisfy the practical applications of RTP materials in biomedical science.

Circularly polarized luminescence in quantum dot-based materials

Quantum dots (QDs) have emerged as fantastic luminescent nanomaterials with significant potential due to their unique photoluminescence properties. With the rapid development of circularly polarized luminescence (CPL) materials, many researchers have associated QDs with the CPL property, resulting in numerous novel CPL-active QD-containing materials in recent years. The present work reviews the latest advances in CPL-active QD-based materials, which are classified based on the types of QDs, including perovskite QDs, carbon dots, and colloidal semiconductor QDs. The applications of CPL-active QD-based materials in biological, optoelectronic, and anti-counterfeiting fields are also discussed. Additionally, the current challenges and future perspectives in this field are summarized. This review article is expected to stimulate more unprecedented achievements based on CPL-active QD-based materials, thus further promoting their future practical applications.

Fabrication strategies for chiral self-assembly surface

Chiral self-assembly is the spontaneous organization of individual building blocks from chiral (bio)molecules to macroscopic objects into ordered superstructures. Chiral self-assembly is ubiquitous in nature, such as DNA and proteins, which formed the foundation of biological structures. In addition to chiral (bio) molecules, chiral ordered superstructures constructed by self-assembly have also attracted much attention. Chiral self-assembly usually refers to the process of forming chiral aggregates in an ordered arrangement under various non-covalent bonding such as H-bond, π-π interactions, van der Waals forces (dipole-dipole, electrostatic effects, etc.), and hydrophobic interactions. Chiral assembly involves the spontaneous process, which followed the minimum energy rule. It is essentially an intermolecular interaction force. Self-assembled chiral materials based on chiral recognition in electrochemistry, chiral catalysis, optical sensing, chiral separation, etc. have a broad application potential with the research development of chiral materials in recent years.

Stimuli-fluorochromic smart organic materials

Smart materials based on stimuli-fluorochromic π-conjugated solids (SFCSs) have aroused significant interest due to their versatile and exciting properties, leading to advanced applications. In this review, we highlight the recent developments in SFCS-based smart materials, expanding beyond organometallic compounds and light-responsive organic luminescent materials, with a discussion on the design strategies, exciting properties and stimuli-fluorochromic mechanisms along with their potential applications in the exciting fields of encryption, sensors, data storage, display, green printing, etc. The review comprehensively covers single-component and multi-component SFCSs as well as their stimuli-fluorochromic behaviors under external stimuli. We also provide insights into current achievements, limitations, and major challenges as well as future opportunities, aiming to inspire further investigation in this field in the near future. We expect this review to inspire more innovative research on SFCSs and their advanced applications so as to promote further development of smart materials and devices.

Efficient Visible-Light-Activated Ultra-Long Room-Temperature Phosphorescence Triggered by Multi-Esterification

The development of ultra-long room-temperature phosphorescence (UL-RTP) in processable amorphous organic materials is highly desirable for applications in flexible displays, anti-counterfeiting, and bio-imaging. However, achieving efficient UL-RTP from amorphous materials remains a challenging task, especially with activation by visible light and a bright afterglow. Here we report a general and rational molecular-design strategy to enable efficient visible-light-excited UL-RTP by multi-esterification of a rigid large-plane phosphorescence core. Notably, multi-esterification minimizes the aggregation-induced quenching and accomplishes a 'four birds with one stone' possibility in the generation and radiation process of UL-RTP: i) shifting the excitation from ultraviolet light to blue-light through enhancing the transition dipole moment of low-lying singlet-states, ii) facilitating the intersystem crossing process through the incorporation of lone-pair electrons, iii) boosting the decay process of long-lived triplet excitons resulting from a significantly increased transition dipole moment, and iv) reducing the intrinsic triplet nonradiative decay by substitution of high-frequency vibrating hydrogen atoms. All these factors synergistically contribute to the most efficient and stable visible-light-stimulated UL-RTP (lifetime up to 2.01 s and efficiency up to 35.4 % upon excitation at 450 nm) in flexible films using multi-esterified coronene, which allows high-tech applications in single-component time-delayed white light-emitting diodes and information technology based on flashlight-activated afterglow encryption.

Single-Component Color-Tunable Smart Organic Emitters with Simultaneous Multistage Stimuli-Responsiveness and Multimode Emissions

Achieving color-tunable emission in single-component organic emitters with multistage stimuli-responsiveness is of vital significance for intelligent optoelectronic applications, but remains enormously challenging. Herein, we present an unprecedented example of a color-tunable single-component smart organic emitter (DDOP) that simultaneously exhibits multistage stimuli-responsiveness and multimode emissions. DDOP based on a highly twisted amide-bridged donor-acceptor-donor structure has been found to facilitate intersystem crossing, form multimode emissions, and generate multiple emissive species with multistage stimuli-responsiveness. DDOP pristine crystalline powders exhibit abnormal excitation-dependent emissions from a monomer-dominated blue emission centered at 470 nm to a dimer-dominated yellow emission centered at 550 nm through decreasing the ultraviolet (UV) excitation wavelengths, whereas DDOP single crystals show a wide emission band with a main emission peak at 585 nm when excited at different wavelengths. The emission behaviors of pristine crystalline powders and single crystals are different, demonstrating emission features that are closely related to the aggregation states. The work has developed color-tunable single-component organic emitters with simultaneous multistage stimuli-responsiveness and multimode emissions, which is vital for expanding intelligent optoelectronic applications, including multilevel information encryption, multicolor emissive patterns, and visual monitoring of UV wavelengths.

Photo-Controlled Self-Assembly of Nanoparticles: A Promising Strategy for Development of Novel Structures

Photo-controlled self-assembly of nanoparticles (NPs) is an advanced and promising approach to address a series of material issues from the molecular level to the nano/micro scale, owing to the fact that light stimulus is typically precise and rapid, and can provide contactless spatial and temporal control. The traditional photo-controlled assembly of NPs is based on photochemical processes through NPs modified by photo-responsive molecules, which are realized through the change in chemical structure under irradiation. Moreover, photoexcitation-induced assembly of NPs is another promising physical strategy, and such a strategy aims to employ molecular conformational change in the excited state (rather than the chemical structure) to drive molecular motion and assembly. The exploration and control of NP assembly through such a photo-controlled strategy can open a new paradigm for scientists to deal with "bottom-up" behaviors and develop unprecedented optoelectronic functional materials.

Establishing PQ-ERA photoclick reactions with unprecedented efficiency by engineering of the nature of the phenanthraquinone triplet state

The light-induced photocycloaddition of 9,10-phenanthrenequinone (PQ) with electron-rich alkenes (ERA), known as the PQ-ERA reaction, is a highly attractive photoclick reaction characterized by high selectivity, external non-invasive control with light and biocompatibility. The conventionally used PQ compounds show limited reactivity, which hinders the overall efficiency of the PQ-ERA reaction. To address this issue, we present in this study a simple strategy to boost the reactivity of the PQ triplet state to further enhance the efficiency of the PQ-ERA reaction, enabled by thiophene substitution at the 3-position of the PQ scaffold. Our investigations show that this substitution pattern significantly increases the population of the reactive triplet state (³ππ*) during excitation of 3-thiophene PQs. This results in a superb photoreaction quantum yield (Φ_P, up to 98%), high second order rate constants (k₂, up to 1974 M^-1 s^-1), and notable oxygen tolerance for the PQ-ERA reaction system. These results have been supported by both experimental transient absorption data and theoretical calculations, providing further evidence for the effectiveness of this strategy, and offering fine prospects for fast and efficient photoclick transformations.

Supramolecular Strategy to Achieve Distinct Optical Characteristics and Boosted Chiroptical Enhancement Based on the Closed Conformation of Platinum(II) Complexes

Synthesis of chiral molecules for understanding and revealing the expression, transfer, and amplification of chirality is beneficial to explore effective chiral medicines and high-performance chiroptical materials. Herein, we report a series of square-planar phosphorescent platinum(II) complexes adopting a dominantly closed conformation that exhibit efficient chiroptical transfer and enhancement due to the nonclassical intramolecular C-H···O or C-H···F hydrogen bonds between bipyridyl chelating and alkynyl auxiliary ligands as well as the intermolecular π-π stacking and metal-metal interactions. The spectroscopic and theoretical calculation results demonstrate that the chirality and optic properties are regulated from the molecular level to hierarchical assemblies. Notably, a 154 times larger g_abs value of the circular dichroism signals is obtained. This study provides a feasible design principle to achieve large chiropticity and control the expression and transfer of the chirality.

Photoexcitation-Induced Assembly: A Bottom-Up Physical Strategy for Driving Molecular Motion and Phase Evolution

ConspectusIn the field of molecular assembly, photodriven self-assembly is a smart and crucial strategy to regulate the molecular orderliness, multiscale structure, and optoelectronic properties. Traditionally, photodriven self-assembly is based on photochemical processes, through molecular structural change induced by photoreactions. Despite great progress in the photochemical self-assembly, there still exists disadvantages (e.g., the photoconversion rate never reaches 100% with the possible side reactions). Therefore, the photoinduced nanostructure and morphology are often difficult to predict due to insufficient phase transition or defects. In contrast, the physical processes based on photoexcitation are straightforward and can fully utilize photons to avoid the drawbacks of photochemistry. The photoexcitation strategy excludes the change of molecular structure, only utilizing the molecular conformational change from the ground state to excited state. Then, the excited state conformation is employed to drive molecular movement and aggregation, further promoting the synergistic assembly or phase transition of the entire material system. The regulation and exploration of molecular assembly upon photoexcitation can open up a new paradigm to deal with the "bottom-up" behavior and develop unprecedented optoelectronic functional materials.This Account starts with a brief introduction to the problems faced by photocontrolled self-assembly and presents the photoexcitation-induced assembly (PEIA) strategy. Then, we focus on exploring PEIA strategy based on persulfurated arenes as the prototype. The molecular conformational transition of persulfurated arenes from the ground state to the excited state is conducive to the formation of intermolecular interactions, successively driving molecular motion, aggregation, and assembly. Next, we describe our progress in exploring PEIA of persulfurated arenes at the molecular level and then demonstrate that the PEIA of persulfurated arenes can synergistically drive molecular motion and phase transition in various block copolymer systems. Moreover, we provide the potential applications of PEIA in dynamic visual imaging, information encryption, and surface property regulation. Finally, an outlook on further development of PEIA is prospected.

Making multi-twisted luminophores produce persistent room-temperature phosphorescence

Multi-twisted molecules, especially those with more than four branched rotation axes, have served as superior prototypes in diverse fields like molecular machines, optical materials, sensors, and so forth. However, due to excessive non-radiative relaxation of these molecules, it remains challenging to address their persistent room-temperature phosphorescence (pRTP), which limits their further development. Herein, we develop a host-guest energy-transfer relay strategy to improve the phosphorescence lifetime of multi-twisted luminophores by over thousand-fold to realize pRTP, which can be witnessed by the naked eye after removing the excitation light source. Moreover, we employ photoexcitation-induced molecular rearrangement to further prolong the phosphorescence lifetime, which, to the best of our knowledge, is the first example of photoactivation in ordered host-guest systems. Our systems show superior humidity and oxygen resistance, enabling long-term (at least over 9-12 months) stability of the pRTP properties. By achieving pRTP of multi-twisted luminophores, this work can advance the understanding of molecular photophysical mechanisms and guide the study of more molecular systems that are difficult to achieve pRTP.

Dynamic B/N Lewis Pairs: Insights into the Structural Variations and Photochromism via Light-Induced Fluorescence to Phosphorescence Switching

Ultralong afterglow emissions due to room-temperature phosphorescence (RTP) are of paramount importance in the advancement of smart sensors, bioimaging and light-emitting devices. We herein present an efficient approach to achieve rarely accessible phosphorescence of heavy atom-free organoboranes via photochemical switching of sterically tunable fluorescent Lewis pairs (LPs). LPs are widely applied in and well-known for their outstanding performance in catalysis and supramolecular soft materials but have not thus far been exploited to develop photo-responsive RTP materials. The intramolecular LP M1BNM not only shows a dynamic response to thermal treatment due to reversible N→B coordination but crystals of M1BNM also undergo rapid photochromic switching. As a result, unusual emission switching from short-lived fluorescence to long-lived phosphorescence (rad-M1BNM, τ_RTP =232 ms) is observed. The reported discoveries in the field of Lewis pairs chemistry offer important insights into their structural dynamics, while also pointing to new opportunities for photoactive materials with implications for fast responsive detectors.

Organic phosphorescent scintillation from copolymers by X-ray irradiation

Scintillators that exhibit X-ray-excited luminescence have great potential in radiation detection, X-ray imaging, radiotherapy, and non-destructive testing. However, most reported scintillators are limited to inorganic or organic crystal materials, which have some obstacles in repeatability and processability. Here we present a facile strategy to achieve the X-ray-excited organic phosphorescent scintillation from amorphous copolymers through the copolymerization of the bromine-substituted chromophores and acrylic acid. These polymeric scintillators exhibit efficient X-ray responsibility and decent phosphorescent quantum yield up to 51.4% under ambient conditions. The universality of the design principle was further confirmed by a series of copolymers with multi-color radioluminescence ranging from green to orange-red. Moreover, we demonstrated their potential application in X-ray radiography. This finding not only outlines a feasible principle to develop X-ray responsive phosphorescent polymers, but also expands the potential applications of polymer materials with phosphorescence features.

Ultralong-Lived Up-Conversional Room-Temperature Afterglow Materials with a Polyvinyl Alcohol Substrate

Room-temperature afterglow (RTA) materials have a wide range of applications in imaging, lighting, and therapy, due to their long lifetime and persistent luminescence after the light source is removed. Additionally, near-infrared light with low energy and a high penetration rate ensures its irreplaceable importance in imaging and therapy. Thus, it is vital to design RTA materials excited by NIR. In the present study, we select up-conversion nanoparticles (UCNPs) as the donor and add them into hybrids, obtained by dispersing coronene tetra-carboxylate salt (CS) into a polyvinyl alcohol (PVA)-substrate through a series of mixing methods. Through radiation energy transfer between the donor UCNPs and the acceptor CS, a kind of RTA film with a photoluminescence lifetime of more than 2 s under NIR excitation was successfully achieved, and these films could maintain persistent naked-eye-distinguishable luminescence after withdrawing the excitation light source. Furthermore, the films obtained from UCNP doping into CS/PVA hybrids were found to exhibit better RTA performance than those from smearing. This idea of up-conversion afterglow broadens the tuning and application scope for polymer-based luminescent materials.

Click Synthesis Enabled Sulfur Atom Strategy for Polymerization-Enhanced and Two-Photon Photosensitization

Facile tailoring of photosensitizers (PSs) with advanced and synergetic properties is highly expected to broaden and deepen photodynamic therapy (PDT) applications. Herein, a catalyst-free thiol-yne click reaction was employed to develop the sulfur atom-based PSs by using the in situ formed sulfur "heavy atom effect" to enhance the intersystem crossing (ISC), while such an effect can be remarkably magnified by the polymerization. The introduction of a tetraphenylpyrazine-based aggregation-induced emission (AIE) unit was also advantageous in PS design by suppressing their non-radiative decay to facilitate the ISC in the aggregated state. Besides, the resulting sulfur atom electron donor, together with a double-bond π bridge and AIE electron acceptor, created a donor-π-acceptor (D-π-A) molecular system with good two-photon excitation properties. Combined with the high singlet oxygen generation efficiency, the fabricated polymer nanoparticles exhibited an excellent in vitro two-photon-excited PDT towards cancer cells, therefore possessing a huge potential for the deep-tissue disease therapy.

A Highly Efficient Phosphorescence/Fluorescence Supramolecular Switch Based on a Bromoisoquinoline Cascaded Assembly in Aqueous Solution

Despite ongoing research into photocontrolled supramolecular switches, reversible photoswitching between room-temperature phosphorescence (RTP) and delayed fluorescence is rare in the aqueous phase. Herein, an efficient RTP-fluorescence switch based on a cascaded supramolecular assembly is reported, which is constructed using a 6-bromoisoquinoline derivative (G3 ), cucurbit[7]uril (CB[7]), sulfonatocalix[4]arene (SC4A4), and a photochromic spiropyran (SP) derivative. Benefiting from the confinement effect of CB[7], initial complexation with CB[7] arouses an emerging RTP signal at 540 nm for G3 . This structure subsequently coassembles with amphiphilic SC4A4 to form tight spherical nanoparticles, thereby further facilitating RTP emission (≈12 times) in addition to a prolonged lifetime (i.e., 1.80 ms c.f., 50.1 µs). Interestingly, following cascaded assembly with a photocontrolled energy acceptor (i.e., SP), the efficient light-driven RTP energy transfer occurs when SP is transformed to its fluorescent merocyanine (MC) state. Ultimately, this endows the final system with an excellent RTP-fluorescence photoswitching property accompanied by multicolor tunable long-lived emission. Moreover, this switching process can be reversibly modulated over multiple cycles under alternating UV and visible photoirradiation. Finally, the prepared switch is successfully applied to photocontrolled multicolor cell labeling to offer a new approach for the design and fabrication of novel advanced light-responsive RTP materials in aqueous environments.

Esterase-Activated Precipitating Strategy to Achieve Highly Specific Detection and Long-Term Imaging of Calcium Ions by Aggregation-Induced Phosphorescence Probe

Spatial and temporal monitoring of bioactive targets such as calcium ions is vitally significant for their essential roles in physiological and biochemical functions. Herein, we proposed an esterase-activated precipitating strategy to achieve highly specific identification and long-term bioimaging of calcium ions via lighting up the calcium ions by precipitation using a water-soluble aggregation-induced phosphorescence (AIP) probe. The designed probe CaP2 has an AIP behavior and can be efficiently aggregated by calcium ions through the coupling coordination of carboxylic acid and cyanide groups, which enables it to light up Ca²⁺ by precipitating-triggered phosphorescence. Four hydrophilic groups of tetraethylene glycol were introduced to endow the resulting probe CaP3 with extraordinary water solubility as well as excellent cellular penetration. Only when the probe CaP3 penetrates inside the live cells the existing esterase in cells can activate the probe to be transformed active CaP2 probe selectively binding with calcium ion in the surroundings. The probe was used to further evaluate the imaging of intracellular calcium ions in model organisms. The excellent imaging performance of CaP3 in Arabidopsis thaliana seedling roots demonstrates that CaP3 has the excellent capability of monitoring calcium ions in live-cell imaging, and furthermore CaP3 exhibits much better photostability and thereby greater potential in long-term imaging. This work established a general esterase-activated precipitating strategy to achieve specific detection and bioimaging in situ triggered by esterase in live cells, and established a water-soluble aggregation-induced phosphorescence probe with high selectivity to achieve specific sensing and long-term imaging of calcium ions in live cells.

Mechanical stimuli-induced multiple photophysical responsive AIEgens with high contrast properties

A new cyano-distyrylbenzene derivative with a mechano-force induced high contrast transition in color and emission was demonstrated here. Under mechanical stimuli, the emission peak can undergo a large wavelength shift from 440 nm to 650 nm, while the appearance color can switch from white to pink.

Rigid Polymer Network-Based Autonomous Photoswitches Working in the Solid State Encoded by Room-Temperature Phosphorescence

Autonomous molecular switches with self-recoverability are of great theoretical and experimental interest since they can avoid additional chemical or energy imposition during the working process. Due to the high energy barrier, however, the solid state is generally unfavorable for materials to exhibit the autonomous switch behavior. To promote the practical usage of the autonomous molecular switch, herein, we propose a prototype of an autonomous photoswitch that can work in the solid state based on a rigid polymer network. A hexacarboxylic sodium-modified hexathiobenzene compound was employed as a photoexcitation-driven unit, which can undergo molecular aggregation upon irradiation because of the distinct conformational difference between the ground state and the photoexcited state. Then, we selected a relatively rigid polymer named poly(dimethyldiallylammonium)chloride (PDDA) to complex with the hexacarboxylic sodium-modified hexathiobenzene through electrostatic coupling. Through optimization, the photoexcitation-controlled molecular aggregation and its self-recovery can work well in the solid matrix of PDDA under rhythmical photoirradiation. This process can be easily encoded by a self-recoverable room-temperature phosphorescence, featuring an excellent performance of the autonomous switch.

Tunable Second-Level Room-Temperature Phosphorescence of Solid Supramolecules between Acrylamide-Phenylpyridium Copolymers and Cucurbit[7]uril

A series of solid supramolecules based on acrylamide-phenylpyridium copolymers with various substituent groups (P-R: R=-CN, -CO₂ Et, -Me, -CF₃ ) and cucurbit[7]uril (CB[7]) are constructed to exhibit tunable second-level (from 0.9 s to 2.2 s) room-temperature phosphorescence (RTP) in the amorphous state. Compared with other solid supramolecules P-R/CB[7] (R=-CN, -CO₂ Et, -Me), P-CF₃ /CB[7] displays the longest lifetime (2.2 s), which is probably attributed to the fluorophilic interaction of cucurbiturils leading to a uncommon host-guest interaction between 4-phenylpyridium with -CF₃ and CB[7]. Furthermore, the RTP solid supramolecular assembly (donors) can further react with organic dyes Eosin Y or SR101 (acceptors) to form ternary supramolecular systems featuring ultralong phosphorescence energy transfer (PpET) and visible delayed fluorescence (yellow for EY at 568 nm and red for SR101 at 620 nm). Significantly, the ultralong multicolor PpET supramolecular assembly can be further applied in fields of anti-counterfeiting and information encryption and painting.

Controllable Macroscopic Chirality of Coordination Polymers through pH and Anion-Mediated Weak Interactions

Helical architectures with controllable helical sense bias have recently attracted considerable interest for mimicking biological helices and developing novel chiral materials. Coordination polymers (CPs), composed of metal ion nodes and organic linkers, are intriguing systems showing tunable structures and functions. However, CPs with helical morphologies have rarely been explored so far. Particularly, chirality inversion through external stimulus has not been achieved in helical CPs. In this work, we carried out an in-depth investigation on the self-assembly of 1D gadolinium(III) phosphonate CPs using GdX₃ (X=Cl, Br, I) and Gd(RSO₃ ) (R=CH₃ , C₆ H₅ , CF₃ ) as metal sources and R-(1-phenylethylamino)methyl phosphonic acid (R-pempH₂ ) as ligand. Superhelices were formed by precise control of the interchain interactions through different intercalated anions. Furthermore, the twisting direction of superhelices could be controlled by synergistic effect of anions and pH. This study may provide a new route to fabricate helical nanostructures of CPs with a desirable chiral sense and help understand the inner mechanism of the self-assembly process of macroscopic helical structures of molecular systems.

Hierarchical Chiral Supramolecular Nanoarchitectonics with Molecular Detection: Helical Structure Controls upon Self-Assembly and Coassembly

The morphological transformation from microspheres to helical supramolecular nanofibers with controllable handedness is achieved by the introduction of molecular chirality based on amino acid derivatives (TDAP), and the chirality of the supramolecular architectures that are achieved is nullified through the coassembly of the equivalent TDAP enantiomers. The molecular detection of achiral melamine based on the R-TDAP-COOH supramolecular system is achieved by the appearance of helicity and inversion.

Purely Organic Room-Temperature Phosphorescence Endowing Fast Intersystem Crossing from Through-Space Spin-Orbit Coupling

Purely organic room-temperature phosphorescence endowing very fast intersystem crossing from through-space systems has not been well investigated. Here we report three space-confined bridged phosphors, where phenothiazine is linked with dibenzothiophene, dibenzofuran, and carbazole by a 9,9-dimethylxanthene bridge. Nearly pure phosphorescence is observed in the crystals at room temperature. Interestingly, phosphorescence comes solely from the phenothiazine segment. Experimental results indicate that bridged counterparts of dibenzothiophene, dibenzofuran, and carbazole contribute as close-lying triplet states with locally excited (LE) character. The through-space spin-orbit coupling principle is proposed in these bridged systems, as their ¹LE and ³LE states have intrinsic spatial overlap, degenerate energy levels, and tilting face-to-face alignment. The resulting effective through-space spin-orbit coupling leads to efficient intersystem crossing a with rate constant as high as 10⁹ s^-1 and an overwhelming triplet decay channel of the singlet excited state.

Stacked Reticular Frame Boosted Circularly Polarized Luminescence of Chiral Covalent Organic Frameworks

Chiral covalent organic frameworks (COFs) with circularly polarized luminescence (CPL) are intriguing as advanced chiroptical materials but have not been reported to date. We constructed chiroptical COF materials with CPL activity through the convenient Knoevenagel condensation of formyl-functionalized axially chiral linkers and C3-symmetric 1,3,5-benzenetriacetonitrile. Remarkably, the as-prepared chiral COFs showed high absorption and luminescent dissymmetric factors up to 0.02 (g_abs ) and 0.04 (g_lum ), respectively. In contrast, the branched chiral polymers from the same starting monomers were CPL silent. Structural and spectral characterization revealed that the reticular frame was indispensable for CPL generation via confined chirality transfer. Moreover, reticular stacking boosted the CPL performance significantly due to the interlayer restriction of frame. This work demonstrates the first example of a CPL-active COF and provides insight into CPL generation through covalent reticular chemistry, which will play a constructive role in the future design of high-performance CPL materials.

TADF-Type Organic Afterglow

We report a highly efficient dopant-matrix afterglow system enabled by TADF mechanism to realize afterglow quantum yields of 60-70 %, which features a moderate rate constant for reverse intersystem crossing (k_RISC ) to simultaneously improve afterglow quantum yields and maintain afterglow emission lifetime. Difluoroboron β-diketonate (BF₂ bdk) compounds are designed with multiple electron-donating groups to possess moderate k_RISC values and are selected as luminescent dopants. The matrices with carbonyl functional groups such as phenyl benzoate (PhB) have been found to interact with and perturb BF₂ bdk excited states by dipole-dipole interactions and thus enhance the intersystem crossing of BF₂ bdk excited states. Through dopant-matrix collaboration, the efficient TADF-type afterglow materials have been achieved to exhibit excellent processability into desired shapes and large-area films by melt casting, as well as aqueous afterglow dispersions for potential bioimaging applications.

Enhancing the Operability of Photoexcitation-Controlled Aggregation-Induced Emissive Molecules in the Organic Phase

Controllable aggregation-induced emission luminogens (AIEgens) by photoexcitation can be conducted within a single solvent, thus opening new opportunities for preparing and processing smart materials. However, undesired side-reactions like photooxidation that can easily occur in the organic phase remain, limiting their applications. To enhance the operability of photoexcitation-controlled AIEgens (to specifically produce a phosphorescence characteristic) in the organic phase, in this work, we employ a typical prototype, hexathiobenzene, usually as the specific phosphorescent group, and investigate a series of physical and chemical factors, such as light intensity, dissolved oxygen content, and solvent polarity, to explore ways to control the photoexcitation-controllable AIEgens against the impurities from side-reactions. An organogel strategy was also developed to minimize interference factors and improve the practical application ability. We believe that the presented results provide new insights into the further development of the photoexcitation-based functional materials and the promotion of their practical usage.

Visualizing Material Processing via Photoexcitation-Controlled Organic-Phase Aggregation-Induced Emission

Aggregation-induced emission (AIE) has been much employed for visualizing material aggregation and self-assembly. However, water is generally required for the preparation of the AIE aggregates, the operation of which limits numerous material processing behaviors. Employing hexathiobenzene-based small molecules, monopolymers, and block copolymers as different material prototypes, we herein achieve AIE in pure organic phases by applying a nonequilibrium strategy, photoexcitation-controlled aggregation. This strategy enabled a dynamic change of molecular conformation rather than chemical structure upon irradiation, leading to a continuous aggregation-dependent luminescent enhancement (up to ~200-fold increase of the luminescent quantum yield) in organic solvents. Accompanied by the materialization of the nonequilibrium strategy, photoconvertible self-assemblies with a steady-state characteristic can be achieved upon organic solvent processing. The visual monitoring with the luminescence change covered the whole solution-to-film transition, as well as the in situ photoprocessing of the solid-state materials.

Transforming a Fluorochrome to an Efficient Photocatalyst for Oxidative Hydroxylation: A Supramolecular Dimerization Strategy Based on Host-Enhanced Charge Transfer

The development of non-covalent synthetic strategy to fabricate efficient photocatalysts is of great importance in theranostic and organic materials. Herein, a fluorochrome N,N'-dimethyl 2,5-bis(4-pyridinium)thiazolo[5,4-d]thiazolediiodide (MPT) was transformed into an efficient photocatalyst through supramolecular dimerization in the cavity of cucurbit[8]uril (CB[8]). The host-enhanced charge transfer interaction within the supramolecular dimer 2MPT-CB[8] dramatically promoted intersystem crossing to produce triplet. In addition, the staggered conformation of 2MPT-CB[8] facilitated the energy transfer and electron transfer of the triplet. As a result, 2MPT-CB[8] could serve as a high-efficiency photocatalyst for the oxidative hydroxylation of arylboronic acids. This supramolecular dimerization strategy enriches the supramolecular engineering of functional π-systems. It is anticipated that this strategy can be extended to fabricate various π-systems with tailor-made functions.

Simple Vanilla Derivatives for Long-Lived Room-Temperature Polymer Phosphorescence as Invisible Security Inks

Developing novel long-lived room-temperature polymer phosphorescence (RTPP) materials could significantly expand their application scope. Herein, a series of RTPP materials based on eight simple vanilla derivatives for security ink application are reported. Attributed to strong mutual hydrogen bonding with polyvinyl alcohol (PVA) matrix, vanilla-doped PVA films exhibit ultralong phosphorescence emission under ambient conditions observed by naked eyes, where methyl vanillate shows the longest emission time up to 7 s. Impressively, when vanilla-doped PVA materials are utilized as invisible security inks, and the inks not only present excellent luminescent emission stability under ambient conditions but also maintain perfect reversibility between room temperature and 65°C for multiple cycles. Owing to the unique RTPP performance, an advanced anticounterfeiting data encoding/reading strategy based on handwriting technology and complex pattern steganography is developed.

Controlling Ultra-Large Optical Asymmetry in Amorphous Molecular Aggregations

Although ultra-large optical asymmetry appears in crystalline materials, distractions from the mesoscopic ordering often causes inauthenticity in chiropticity. In amorphous materials, however, it remains challenging and elusive to achieve large chiropticity. Herein, we report the quantitative control of chiral amplification, on amorphous supramolecular structures of cholesteryl-linked bis(dipyrrinato)zinc(II), to an exceptionally high level. A proper chiral packing of the building block at several molecular scale considerably contributes to the absorptive dissymmetry factor g_abs , although the system is overall disordered. The intense and tunable aggregation strength renders a variable g_abs value up to +0.10 and +0.31 in the solution and in film state. On this basis, a superior ON-OFF switching of chiropticity is realized under external stimuli. This work establishes a general design principle to control over ultra-large optical asymmetry on a wider scope of chiral materials.

Lighting up solid states using a rubber

It is crucial and desirable to develop green and high-efficient strategies to regulate solid-state structures and their related material properties. However, relative to solution, it is more difficult to break and generate chemical bonds in solid states. In this work, a rubbing-induced photoluminescence on the solid states of ortho-pyridinil phenol family was achieved. This rubbing response relied on an accurately designed topochemical tautomerism, where a negative charge, exactly provided by the triboelectric effect of a rubber, can induce a proton transfer in a double H-bonded dimeric structure. This process instantaneously led to a bright-form tautomer that can be stabilized in the solid-state settings, leading to an up to over 450-fold increase of the fluorescent quantum yield of the materials. The property can be repeatedly used due to the reversibility of the tautomerism, enabling encrypted applications. Moreover, a further modification to the structure can be accomplished to achieve different properties, opening up more possibilities for the design of new-generation smart materials.

Changes in molecular properties due to stimuli response are critically important for the development of new materials. However, most processes are slow or inefficient in the solid state. Here the authors demonstrate property switching in the solid state using a rubbing-induced tautomerism in multiple hydrogen-bonded donor-acceptor couples.

Multidimensional Structure Conformation of Persulfurated Benzene for Highly Efficient Phosphorescence

It is a challenge to acquire, realize, and comprehend highly emissive phosphorescent molecules. Herein, we report that, using persulfurated benzene compounds as models, phosphorescence can be strongly enhanced through the modification of molecular conformation and crystal growth conditions. By varying the peripheral groups in these compounds, we were able to control their molecular conformation and crystal growth mode, leading to one- (1D), two- (2D), and three-dimensional (3D) crystal morphologies. Two kinds of typical molecular conformations were separately obtained in these crystals through substituent group control or the solvent effect. Importantly, a symmetrical 3,3-conformer exhibits that a planar central benzene ring prefers a 3D-type crystal growth mode, demonstrating high phosphorescence efficiency. Such outcome is attributed to the strong crystal protection effect of the 3D crystal and the bright global minimum (GM) boat-like T₁ state of the symmetrical 3,3-conformer. The conformation studies further reveal small deformation of the inner benzene ring in both singlet and triplet states. The GM boat-like T₁ state is indicated by theoretical calculations, which is far away from the conical intersection (CI) point between the S₀ and T₁ potential energy surfaces. Meanwhile, the small energy gap between S₁ and T₁ states and the considerable spin-orbit coupling matrix elements allow an efficient population of the T₁ state. Combined with the crystal protection and conformation effect, the 3,3-conformer crystal shows high phosphorescence efficiency. The unsymmetrical 2,4-conformer conformation with the twisted central benzene ring leads to 1D or 2D crystal growth mode, which has a weak crystal protection effect. In addition, the unsymmetrical conformation has a dark GM T₁ state that is very close to the T₁-S₀ CI point, implying an efficient nonradiative T₁-S₀ quenching. Thus, weak phosphorescence was observed from the unsymmetrical conformation. This study provides an insight for the development of highly emissive phosphorescent materials.