New Insight into the Synthesis of Large-Pore Ordered Mesoporous Materials

Mussel-inspired interface deposition strategy for mesoporous metal-phenolic nanospheres with superior antioxidative, photothermal and antibacterial performance

Metal-phenolic networks (MPNs) have emerged as a versatile and multifunctional platform applied in bioimaging, disease treatment, electrocatalysis, and water purification. The synthesis of MPNs with mesoporous frameworks and ultra-small diameters (<200 nm), crucial for post-modification, cargo loading, and mass transport, remains a formidable challenge. Inspired by mussel chemistry, mesoporous metal-phenolic nanospheres (MMPNs) are facilely prepared by direct deposition of the metal-polyphenol complex on the interface of oil nano-droplets composed of block copolymers/1,3,5-trimethylbenzene followed by a spontaneous template-removal process. Due to the penetrable and stable networks, the oil nano-droplets gradually leak from the networks driven by shear stress during the stirring process. As a result, MMPNs are obtained without additional template removal procedures such as solvent extraction or high-temperature calcination. The materials have a large pore size (∼12.1 nm), uniform spherical morphology with a small particle size (∼99 nm), and a large specific surface area (49.8 m2 g-1). Due to the abundant phenolic hydroxyl groups, the MMPNs show excellent antioxidative property. The MMPNs also have excellent photothermal property, whose photothermal conversion efficiency was 40.9 %. Moreover, the phenolic hydroxyl groups can reduce Ag+ in situ to prepare Ag nanoparticles loaded MMPNs composites, which have excellent inhibition performance of drug-resistant bacteria biofilm.

Smart synthesis of highly porous metal oxide powders with the self-assembly of amphiphilic organic compounds

Supramolecular chemistry-mediated synthesis has thus far been employed for the design of ordered mesoporous structures surrounded by various metal oxides that are helpful as nanometer-scaled unique reaction containers with high specific surface area, large pore volume and uniform mesopores useful for the storage and mass transport of large-sized molecules. The evaporation-induced self-assembly (EISA) process is very powerful for fabricating mesoporous metal oxide films with the rapid evaporation of solvents. Although a similar EISA process is also applied to synthesize mesoporous metal oxide powders using the room-temperature drying process with slow evaporation of solvents, the control of the evaporation rate should be quantified for the complete reproduction of high-quality metal oxide powders. In this feature article, I introduce our recent challenge in synthesizing highly porous metal oxides in powder form with the smart optimization of synthetic conditions by combining several EISA processes to eliminate the mismatch of the rate of solvent evaporation, inducing the self-assembly of amphiphilic organic molecules.

Defect Regulation Strategy of Porous Persistent Phosphors for Multiple and Dynamic Information Encryption

Optical encryption technologies based on persistent luminescence material have currently drawn increasing attention due to the distinctive and long-lived optical properties, which enable multi-dimensional and dynamic optical information encryption to improve the security level. However, the controlled synthesis of persistent phosphors remains largely unexplored and it is still a great challenge to regulate the structure for optical properties optimization, which inevitably sets significant limitations on the practical application of persistent luminescent materials. Herein, a controlled synthesis method is proposed based on defect structure regulation and a series of porous persistent phosphors is obtained with different luminous intensities, lifetime, and wavelengths. By simply using diverse templates during the sol-gel process, the oxygen vacancy defects structures are successfully regulated to improve the optical properties. Additionally, the obtained series of porous Al2O3 are utilized for multi-color and dynamic optical information encryption to increase the security level. Overall, the proposed defect regulation strategy in this work is expected to provide a general and facile method for optimizing the optical properties of persistent luminescent materials, paving new ways for broadening their applications in multi-dimensional and dynamic information encryption.

Porous silicon and silica carriers for delivery of peptide therapeutics

Peptides have gained tremendous popularity as biological therapeutic agents in recent years due to their favourable specificity, diversity of targets, well-established screening methods, ease of production, and lower cost. However, their poor physiological and storage stability, pharmacokinetics, and fast clearance have limited their clinical translation. Novel nanocarrier-based strategies have shown promise in overcoming these issues. In this direction, porous silicon (pSi) and mesoporous silica nanoparticles (MSNs) have been widely explored as potential carriers for the delivery of peptide therapeutics. These materials possess several advantages, including large surface areas, tunable pore sizes, and adjustable pore architectures, which make them attractive carriers for peptide delivery systems. In this review, we cover pSi and MSNs as drug carriers focusing on their use in peptide delivery. The review provides a brief overview of their fabrication, surface modification, and interesting properties that make them ideal peptide drug carriers. The review provides a systematic account of various studies that have utilised these unique porous carriers for peptide delivery describing significant in vitro and in vivo results. We have also provided a critical comparison of the two carriers in terms of their physicochemical properties and short-term and long-term biocompatibility. Lastly, we have concluded the review with our opinion of this field and identified key areas for future research for clinical translation of pSi and MSN-based peptide therapeutic formulations.

Tuning Surface Organic Structures by Small Gas Molecules through Catassembly and Coassembly

The field of molecular assembly has seen remarkable advancements across various domains, such as materials science, nanotechnology, and biomedicine. Small gas molecules serve as pivotal modulators, capable of altering the architecture of assemblies via tuning a spectrum of intermolecular forces including hydrogen bonding, dipole-dipole interactions, and metal coordination. Surface techniques, notably scanning tunneling microscopy and atomic force microscopy, have proven instrumental in dissecting the structural metamorphosis and characteristic features of these assemblies at an unparalleled single-molecule resolution. Recent research has spotlighted two innovative approaches for modulating surface molecular assemblies with the aid of small gas molecules: "catassembly" and "coassembly". This Perspective delves into these methodologies through the lens of varying molecular interaction types. The strategies discussed here for regulating molecular assembly structures using small gas molecules can aid in understanding various complex assembly processes and structures and provide guidance for the further fabrication of complex surface structures.

Efficient optimization of the synthetic conditions for aerosol-assisted high-quality mesoporous CeO2 powders

The morphology of surfactant-assisted mesoporous metal oxides was tuned to obtain high surface-area particles by utilizing the synthetic conditions for fabricating transparent thin films through an evaporation-induced self-assembly (EISA) process. For investigating their potential applications, especially for designing heterogeneous catalysts, mesoporous metal oxides should be obtained in powder forms; however, a serious limitation associated with their reproducibility persists. Herein, along with a rapid optimization approach, starting from determining and improving chemical composition for the fabrication of mesoporous metal oxide films, an advanced approach to obtain highly porous metal oxide powders is presented using a temperature-controlled spray-drying process with step-by-step but smooth optimization by combining several EISA processes, involving the utilization of a precursor solution optimized for a slow-drying process in the case of ceria (CeO2) using poly(styrene)-block-poly(ethylene oxide) (PS-b-PEO).

Hollow mesoporous carbon supported Co-modified Cu/Cu2O electrocatalyst for nitrate reduction reaction

The electroreduction of nitrate (NO3-) pollutants to ammonia (NH3) provides a sustainable approach for both wastewater treatment and NH3 synthesis. However, electroreduction of nitrate requires multi-step electron and proton transfer, resulting in a sluggish reaction rate. Herein, we synthesized a Co-modified Cu/Cu2O catalyst supported on hollow mesoporous carbon substrates (Co/Cu/Cu2O-MesoC) by a one-step microwave-assisted reduction method. At -0.25 V vs. reversible hydrogen electrode (RHE), Co/Cu/Cu2O-MesoC shows a Faradaic efficiency (FE) of 100 ± 1% in 0.1 M NO3-. Notably, the maximum NH3 yield rate (YieldNH3) reaches 6.416 ± 0.78 mmol mgcat-1h-1 at -0.45 V vs. RHE, which is much better than most of the previous reports. Electrochemical evaluation and in-situ Fourier transform infrared (FTIR) spectroscopy reveal that the addition of Co could promote water electrolysis, and the generated H* is involved in the following hydrogenation of intermediates, ultimately leading to faster kinetics and energetics during electrocatalytic conversion of NO3- to NH3. This synergetic electrocatalysis strategy opens a new avenue for the development of high-activity, selectivity, and stability catalysts.

3D Carbon Microspheres with a Maze-Like Structure and Large Mesopore Tunnels Built From Rapid Aerosol-Confined Coherent Salt/Surfactant Templating

Hierarchically porous carbons with tailor-made properties are essential for applications wherein rich active sites and fast mass transfer are required. Herein, a rapid aerosol-confined salt/surfactant templating approach is proposed for synthesizing hierarchically porous carbon microspheres (HPCMs) with a maze-like structure and large mesopore tunnels for high-performance tri-phase catalytic ozonation. The confined assembly in drying microdroplets is crucial for coherent salt (NaCl) and surfactant (F127) dual templating without macroscopic phase separation. The HPCMs possess tunable sizes, a maze-like structure with highly open macropores (0.3-30 µm) templated from NaCl crystal arrays, large intrawall mesopore tunnels (10-45 nm) templated from F127, and rich micropores (surface area >1000 m2 g-1 ) and oxygen heteroatoms originated from NaCl-confined carbonization of phenolic resin. The structure formation mechanism of the HPCMs and several influencing factors on properties are elaborated. The HPCMs exhibit superior performance in gas-liquid-solid tri-phase catalytic ozonation for oxalate degradation, owing to their hierarchical pore structure for fast mass transfer and rich defects and oxygen-containing groups (especially carbonyl) for efficient O3 activation. The reactive oxygen species responsible for oxalate degradation and the influences of several structure parameters on performance are discussed. This work may provide a platform for producing hierarchically porous materials for various applications.

Mesoporous carbon hemispheres integrated with Fe-Gd nanoparticles for potential MR/PA imaging-guided photothermal therapy

Asymmetric carbon has emerged as an important material to enrich morphologies as well as enhance functions for bioapplications. Here, asymmetric mesoporous carbon hemispheres (CHS) integrated with γ-Fe2O3 and GdPO4 (Fe-Gd) nanoparticles are proposed and prepared for potential imaging-guided photothermal therapy (PTT). Interestingly, Fe-Gd/CHS contributes to an almost 1.5 times enhancement in light harvesting and photothermal conversion efficiency as compared with its corresponding spherical analogue. The possible underlying mechanism is discussed in view of the unique asymmetric structure-featured carbon. Further identification of the inherited photoacoustic (PA) and magnetic resonance (MR) imaging properties leads to the consequent in vivo evaluation of its imaging and PTT performances, which demonstrates its capability as a function-integrated system for potential theranostics.

Recent progress of MOF-functionalized nanocomposites: From structure to properties

Metal-organic frameworks (MOFs) are novel crystalline porous materials assembled from metal ions and organic ligands. The adaptability of their design and the fine-tuning of the pore structures make them stand out in porous materials. Furthermore, by integrating MOF guest functional materials with other hosts, the novel composites have synergistic benefits in numerous fields such as batteries, supercapacitors, catalysis, gas storage and separation, sensors, and drug delivery. This article starts by examining the structural relationship between the host and guest materials, providing a comprehensive overview of the research advancements in various types of MOF-functionalized composites reported to date. The review focuses specifically on four types of spatial structures, including MOFs being (1) embedded in nanopores, (2) immobilized on surface, (3) coated as shells and (4) assembled into hybrids. In addition, specific design ideas for these four MOF-based composites are presented. Some of them involve in situ synthesis method, solvothermal method, etc. The specific properties and applications of these materials are also mentioned. Finally, a brief summary of the advantages of these four types of MOF composites is given. Hopefully, this article will help researchers in the design of MOF composite structures.

Hollow Mesoporous Molybdenum Single-Atom Nanozyme-Based Reactor for Enhanced Cascade Catalytic Antibacterial Therapy

Purpose

The remarkable peroxidase-like activity of single-atom nanozymes (SAzymes) allows them to catalyze the conversion of H2O2 to •OH, rendering them highly promising for antibacterial applications. However, their practical in vivo application is hindered by the near-neutral pH and insufficient H2O2 levels present in physiological systems. This study was aimed at developing a SAzyme-based nanoreactor and investigating its in vivo antibacterial activity.

Methods

We developed a hollow mesoporous molybdenum single-atom nanozyme (HMMo-SAzyme) using a controlled chemical etching approach and pyrolysis strategy. The HMMo-SAzyme not only exhibited excellent catalytic activity but also served as an effective nanocarrier. By loading glucose oxidase (GOx) with HMMo-SAzyme and encapsulating it with hyaluronic acid (HA), a nanoreactor (HMMo/GOx@HA) was constructed as glucose-triggered cascade catalyst for combating bacterial infection in vivo.

Results

Hyaluronidase (HAase) at the site of infection degraded HA, allowing GOx to convert glucose into gluconic acid and H2O2. An acid environment significantly enhanced the catalytic activity of HMMo-SAzyme to promote the further catalytic conversion of H2O2 to •OH for bacterial elimination. In vitro and in vivo experiments demonstrated that the nanoreactor had excellent antibacterial activity and negligible biological toxicity.

Conclusion

This study represents a significant advancement in developing a cascade catalytic system with high efficiency based on hollow mesoporous SAzyme, promising the advancement of biological applications of SAzyme.

Superstructure-Induced Hierarchical Assemblies for Nanoconfined Photocatalysis

Most attempts to synthesize supramolecular nanosystems are limited to a single mechanism, often resulting in the formation of nanomaterials that lack diversity in properties. Herein, hierarchical assemblies with appropriate variety are fabricated in bulk via a superstructure-induced organic-inorganic hybrid strategy. The dynamic balance between substructures and superstructures is managed using covalent organic frameworks (COFs) and metal-organic frameworks (MOFs) as dual building blocks to regulate the performances of hierarchical assemblies. Significantly, the superstructures resulting from the controlled cascade between COFs and MOFs create highly active photocatalytic systems through multiple topologies. Our designed tandem photocatalysis can precisely and efficiently regulate the conversion rates of bioactive molecules (benzo[d]imidazoles) through competing redox pathways. Furthermore, benzo[d]imidazoles catalyzed by such supramolecular nanosystems can be isolated in yields ranging from 70 % to 93 % within tens of minutes. The multilayered structural states within the supramolecular systems demonstrate the importance of hierarchical assemblies in facilitating photocatalytic propagation and expanding the structural repertoire of supramolecular hybrids.

A high activity mesoporous Pt@KIT-6 nanocomposite for selective hydrogenation of halogenated nitroarenes in a continuous-flow microreactor

In this study, we designed a Pt@KIT-6 nanocomposite prepared by impregnating platinum nanoparticles on the nanopores of the KIT-6 mesoporous material. This Pt@KIT-6 nanocomposite was used as a catalyst in a micro fixed bed reactor (MFBR) for the continuous-flow hydrogenation of halogenated nitroarenes, which demonstrates three advantages. First, the Pt@KIT-6 nanocomposite has a stable mesoporous nanostructure, which effectively enhances the active site and hydrogen adsorption capacity. The uniformly distributed pore structure and large specific surface area were confirmed by electron microscopy and N2 physisorption, respectively. In addition, the aggregation of the loaded metal was avoided, which facilitated the maintenance of high activity and selectivity. The conversion and selectivity reached 99% within 5.0 minutes at room temperature (20 °C). Furthermore, the continuous-flow microreactor allows precise control and timely transfer of the reaction system, reducing the impact of haloid acids. The activity and selectivity of the Pt@KIT-6 nanocomposite showed virtually no degradation after 24 hours of continuous operation of the entire continuous-flow system. Overall, the Pt@KIT-6 nanocomposite showed good catalysis for the hydrogenation of halogenated nitroarenes in the continuous-flow microreactor. This work provides insights into the rational design of a highly active and selective catalyst for selective hydrogenation systems.

Multiple Carbon Morphologies Derived from Polyion Complex-Based Double Hydrophilic Block Copolymers as Templates and Phenol as a Carbon Precursor

This study demonstrates the multiple carbon morphology forming abilities of two dissimilar polyion complex (PIC)-based double hydrophilic block copolymers (DHBC) along with three different phenol concentrations when subjecting the blend in aqueous media via a hydrothermal-assisted carbonization strategy. The morphological transition from worm-like to spherical along with granular is found for the blend of oppositely charged poly(ethylene glycol) (PEG)-conjugated poly(amino acid) block copolymers, PEG-poly(l-lysine) (PEG-PLys) and PEG-poly(glutamic acid) (PEG-PGlu), along with three different concentrations of phenol. In contrast, after mixing the combination of PEG-PLys and PEG-poly(aspartic acid) (PEG-PAsp) separately with three different phenol contents, elliptical to irregular to spherical structural transition occurred. Fourier transform infrared and circular dichroism spectroscopic studies indicated that the formation of worm-like hybrid micellar structures is attributed to the presence of the β-sheet structure, whereas spherical-shaped hybrid micellar structures are formed due to the existence of α-helix and random coil structures. We discuss the mechanism for the secondary structure-induced morphology formation based on the theory related to the packing parameter, which is commonly used for analyzing the shape of the micellar structures. Secondary structures of the PIC-based DHBC system are responsible for forming multiple carbon morphologies, whereas these structures are absent in the case of the amphiphilic block copolymer (ABC) system. Furthermore, ABC-based template methods require organic solvent, ultrasonication, and a prolonged solvent evaporation process to obtain multiple carbon morphologies. Scanning electron microscopy observations suggested there is no significant morphological change even after subjecting the hybrid micelles to carbonization at elevated temperatures. Raman scattering studies revealed that the degree of graphitization and the graphitic crystallite domain size of the carbonized sample depend on the phenol content. Carbon materials exhibited the highest specific surface area of 579 m² g^-1 along with a pore volume of 0.398 cc g^-1, and this observation suggests that the prepared carbons are porous. Our findings illustrate the facile and effective strategy to fabricate the multiple carbon morphologies that can be used as potential candidates for energy storage applications.

Functional Carbon from Nature: Biomass-Derived Carbon Materials and the Recent Progress of Their Applications

Biomass is considered as a promising source to fabricate functional carbon materials for its sustainability, low cost, and high carbon content. Biomass-derived-carbon materials (BCMs) have been a thriving research field. Novel structures, diverse synthesis methods, and versatile applications of BCMs have been reported. However, there has been no recent review of the numerous studies of different aspects of BCMs-related research. Therefore, this paper presents a comprehensive review that summarizes the progress of BCMs related research. Herein, typical types of biomass used to prepare BCMs are introduced. Variable structures of BCMs are summarized as the performance and properties of BCMs are closely related to their structures. Representative synthesis strategies, including both their merits and drawbacks are reviewed comprehensively. Moreover, the influence of synthetic conditions on the structure of as-prepared carbon products is discussed, providing important information for the rational design of the fabrication process of BCMs. Recent progress in versatile applications of BCMs based on their morphologies and physicochemical properties is reported. Finally, the remaining challenges of BCMs, are highlighted. Overall, this review provides a valuable overview of current knowledge and recent progress of BCMs, and it outlines directions for future research development of BCMs.

Continuous-Flow Hydrogenation of Nitroaromatics in Microreactor with Mesoporous Pd@SBA-15

The hydrogenation of nitroaromatics to prepare aromatic amines plays a crucial role in the chemical industry. Traditional hydrogenation has the risk of hydrogen leakage from the equipment, and its catalyst has the disadvantage of being easily deactivated and difficult to recover. In this study, we designed an efficient and stable mesoporous catalyst, Pd@SBA-15, which was constructed by impregnating the nanopores of the mesoporous material SBA-15 with palladium nanoparticles. The catalyst was then filled in a micro-packed-bed reactor (MPBR) for continuous flow hydrogenation. The designed continuous flow hydrogenation system has two distinctive features. First, we used mesoporous Pd@SBA-15 instead of the traditional bulk Pd/C as the hydrogenation catalyst, which is more suitable for exposing the active sites of metal Pd and reducing the agglomeration of nanometals. The highly ordered porous structure enhances hydrogen adsorption and thus hydrogenation efficiency. Secondly, the continuous flow system allows for precise detection and control of the reaction process. The highly efficient catalysts do not require complex post-treatment recovery, which continues to operate for 24 h with barely any reduction in activity. Due to the high catalytic activity, the designed mesoporous Pd@SBA-15 showed excellent catalytic performance as a hydrogenation catalyst in a continuous flow system with 99% conversion of nitroaromatics in 1 min. This work provides insights into the rational design of hydrogenation systems in the chemical industry.

Acceleration of the semi-hydrogenation of alkynes over an N-doped porous carbon sphere-confined ultrafine PdCu bimetallic nanoparticle catalyst

Selective hydrogenation of alkynes to obtain alkenes is a key reaction in petrochemical and fine chemical industries. However, the development of stable and highly selective catalysts with uniformly dispersed active sites is still immensely challenging for the semi-hydrogenation of alkynes. In this study, N-doped porous carbon nanospheres (NPCNs) were synthesized by the nanoemulsion self-assembly and subsequently carbonization method. Ultrafine PdCu bimetallic nanoparticles (NPs) were uniformly dispersed and immobilized on NPCNs. The obtained PdCu/NPCNs catalyst exhibited an open framework and abundant active sites originating from ultrafine PdCu NPs. In the semi-hydrogenation of alkynes, the PdCu/NPCNs catalyst exhibited a remarkable performance and stability, outperforming most of the classical catalysts. The excellent performance was related to the introduction of a secondary metal Cu, which can regulate the electronic state of Pd active sites to further enhance the hydrogenation activity and selectivity. Hence, the facile approach reported herein may be useful for constructing highly dispersed bimetallic NP-based catalysts for selective hydrogenation of alkynes in the petrochemical industry.

Monomicellar assembly to synthesize structured and functional mesoporous carbonaceous nanomaterials

The large pores of functional mesoporous carbonaceous nanomaterials have broad accessibility, making them efficient substrates for the mass transport of chemicals in biomedical applications, gas separation, catalysis, sensing, and energy storage and conversion. Recently, the assembly of monomicelles has been used to control the nanostructure and mesoporosity of carbonaceous nanomaterials, where the structure-oriented unit is a single micelle made up of block copolymers/surfactants and of precursor species (via hydrogen bonds, Coulombic and/or other noncovalent interactions). Each monomicelle then represents a template for a single mesopore, and multiple monomicelles can be stacked like LEGO blocks. After polymerization of the precursor species (in this case dopamine), carbonization results in the carbonaceous nanomaterial. The micellar size, structure and shape can be easily tuned by altering the synthetic conditions, providing a high degree of control over the structure of the final product, which can therefore be shaped into original nanostructures otherwise difficult to synthesize using conventional templating methods. Here we provide a detailed procedure for the preparation of the monomicelles, the monomicellar assembly into mesostructured polymeric samples and the conversion of polymeric samples to carbonaceous frameworks. We describe the functional characterization of two mesoporous carbonaceous nanomaterials that demonstrate excellent sodium-ion storage performance and oxygen reduction reactivity, respectively. The monomicellar assembly process for the synthesis of the ordered mesoporous polymers requires ~5 h; the synthesis, including subsequent centrifugation, freeze drying and carbonization, requires 2 d, whereas the entire procedure, including the characterization of the nanomaterials, requires ~4 d.

Modeling Interfacial Interaction between Gas Molecules and Semiconductor Metal Oxides: A New View Angle on Gas Sensing

With the development of internet of things and artificial intelligence electronics, metal oxide semiconductor (MOS)-based sensing materials have attracted increasing attention from both fundamental research and practical applications. MOS materials possess intrinsic physicochemical properties, tunable compositions, and electronic structure, and are particularly suitable for integration and miniaturization in developing chemiresistive gas sensors. During sensing processes, the dynamic gas-solid interface interactions play crucial roles in improving sensors' performance, and most studies emphasize the gas-MOS chemical reactions. Herein, from a new view angle focusing more on physical gas-solid interactions during gas sensing, basic theory overview and latest progress for the dynamic process of gas molecules including adsorption, desorption, and diffusion, are systematically summarized and elucidated. The unique electronic sensing mechanisms are also discussed from various aspects including molecular interaction models, gas diffusion mechanism, and interfacial reaction behaviors, where structure-activity relationship and diffusion behavior are overviewed in detail. Especially, the surface adsorption-desorption dynamics are discussed and evaluated, and their potential effects on sensing performance are elucidated from the gas-solid interfacial regulation perspective. Finally, the prospect for further research directions in improving gas dynamic processes in MOS gas sensors is discussed, aiming to supplement the approaches for the development of high-performance MOS gas sensors.

Insight into the Evolution of Ordered Mesoporous sp2 Carbonaceous Material Derived from Self-Assembly of a Block Copolymer

Block-copolymer-derived ordered mesoporous carbon (OMC) materials have great potential in many applications, such as adsorption, catalysis, and energy conversions; however, their formation process and the kinetic mechanism remain unclear. Herein, a N-doped OMC (N-OMC) with sp²-bonded C atoms is developed via self-assembly of the polystyrene-block-poly(4-vinyl pyridine) block copolymer. By correlating the external morphologies with the internal chemical states, the formation process can be concluded as follows: (1) pore evolution via polystyrene domain degradation and (2) regularization and graphitization of the residual carbon via the removal of sp³ C atoms. In addition, the thickness of the N-OMC shows a power function relationship with the spin-coating rate, and the N content can be incredibly increased up to 26.34 at. % in an NH₃ carbonization atmosphere. With the as-prepared N-OMC as the support for loading of the pseudo-atomic-scale Pt (Pt/N-OMC), a high electrochemical active surface area value of 99.64 m²·g^-1 and a half-wave potential (E_1/2) of 0.850 V_RHE are achieved, showing great potential in developing single-atom electrocatalysts.

NiFe2O4@B,N,F-tridoped CeO2 (NFTDNC): a mesoporous nanocatalyst in the synthesis of pyrazolopyranopyrimidine and 1H-pyrazolo[1,2-b]phthalazine-5,10-dione derivatives and as an adsorbent

Mesoporous materials, due to their unique textural and structural features and successful applications in different scientific areas, engrossed our curiosity to form a mesoporous nanostructure. A facile method for the formation of nickel ferrite immobilized over B,N,F tridoped mesoporous cerium oxide (CeO₂) nanostructures (NFTDNC) was designed and communicated in this report. It was characterized by thermogravimetric analysis (TGA), X-ray photoelectron spectroscopy (XPS), powder X-ray diffraction study (PXRD), scanning transmission electron microscopy (STEM), high-resolution transmission electron microscopy (HR-TEM), field emission gun-scanning electron microscopy (FE-SEM), vibrating sample magnetometry (VSM), photoluminescence (PL), Brunauer-Emmett-Teller (BET), energy dispersive X-ray analysis (EDX) and elemental mapping, UV-visible spectroscopy (UV-VIS) and Fourier transform infrared spectroscopy (FT-IR). The applications of the mesoporous nanomaterial (NFTDNC) as an adaptable heterogeneous nanocatalyst and as a phenomenal adsorbent for methyl orange (MO) dye were established. It catalyzed the formation of pyrazolopyranopyrimidine and 1H-pyrazolo[1,2-b]phthalazine-5,10-diones derivatives for the five runs. The recycled catalyst exhibited agglomeration in structural features confirmed by PXRD and HR-TEM studies. NFTDNC as an adsorbent fitted the Freundlich isotherm for the adsorption of MO dye. Moreover, it followed the linear pseudo-second-order kinetics rate equation (R² ≥ 0.98914). MO was adsorbed completely in 60 min with the NFTDNC mesoporous nanostructure.

Hierarchical large-pore MOFs templated from poly(ethylene oxide)-b-polystyrene diblock copolymer with tuneable pore sizes

Diblock copolymer poly(ethylene oxide)-b-poly(styrene) (PEO-b-PS) was adopted to template the synthesis of hierarchically porous Ce-based metal-organic frameworks (MOFs) for the first time. By extending the synergistic effect of Hofmeister ions and soft templates into the water-rich system, UiO-66 type Ce-MOFs with a mesopore size of about 15 nm were achieved. Mesopore size could be further tuned up to approximately 23 nm upon introducing 1,3,5-trimethylbenzene to the micelle core of PEO-b-PS.

Hierarchically Porous MOFs Synthesized by Soft-Template Strategies

The past few decades have been witnessing the rapid research boom of metal-organic frameworks (MOFs), which are assembled from metal nodes and multitopic organic linkers. In virtue of their modular assembly mode, they can be tailored according to desired functions to satisfy numerous potential applications. However, most initially reported MOFs were restricted to the microporous regime, limiting their practical applications with bulk molecules involved. Therefore, the research attention was immediately directed toward enlarging the intrinsic pore size of frameworks by extending the secondary building units or organic ligands. Unfortunately, the synthesis of more extended ligands is frequently tedious, and the most resultant MOFs are not sufficiently stable, restricting their popularization. The soft-template strategy is recognized as a promising avenue to produce hierarchically porous MOFs (HPMOFs), although early attempts generally failed due to the incompatibility between the surfactant self-assembly and guided crystallization process of MOF precursors in the organic phase. Therefore, developing a rational soft-template strategy to achieve the precise control of morphology and porosity of HPMOFs is of great significance.In this Account, we present our recent progress on the development and applications of HPMOFs prepared by soft-template strategies. We highlight the key issues upon using the soft-template strategy to synthesize HPMOFs. To enhance the interaction between the template and MOF precursor, a long-chain monocarboxylic acid strategy is introduced to synthesize HPMOFs with irregular mesopores in the organic phase. Then, to improve the order of mesopores, an aqueous-phase synthesis method using amphoteric surfactants as templates is developed to prepare ordered HPMOFs. To further enlarge the pore size and make the synthesis conditions of MOFs compatible with the self-assembly of surfactants, a salting-in species-induced self-assembly strategy is proposed and coupled with the structure-directing properties of copolymer templates to synthesize a series of HPMOFs with large mesopores and even macropores. This salting-in ion-mediated self-assembly (SIMS) strategy paves the way to modify the pore size, pore structure, morphology, and chemical composition of HPMOFs. The separated but intimately interconnected hierarchical pores in the resultant HPMOFs can not only realize rapid mass transport but also isolate different-size guest molecules so that they are competent for a broad range of applications including protein digestion, cascade catalysis, enzyme-assisted substrate sensing, and DNA cleavage. Finally, the limitations, challenges, and future developments of this rapidly evolving field are described. This Account with a highlight to the soft-template strategies not only provides interesting insights to understand the assembly process between templates and MOFs but also inspires an optimization of the properties of HPMOFs from diverse aspects for desired applications.

Soft Template-Based Synthesis of Mesoporous Phosphorus- and Boron-Codoped NiFe-Based Alloys for Efficient Oxygen Evolution Reaction

Controlling the morphology, composition, and crystalline phase of mesoporous nonnoble metal catalysts is essential for improving their performance. Herein, well-defined P- and B-codoped NiFe alloy mesoporous nanospheres (NiFeB-P MNs) with an adjustable Ni/Fe ratio and large mesopores (11 nm) are synthesized via soft-template-based chemical reduction and a subsequent phosphine-vapor-based phosphidation process. Earth-abundant NiFe-based materials are considered promising electrocatalysts for the oxygen evolution reaction (OER) because of their low cost and high intrinsic catalytic activity. The resulting NiFeB-P MNs exhibit a low OER overpotential of 252 mV at 10 mA cm^-2 , which is significantly smaller than that of B-doped NiFe MNs (274 mV) and commercial RuO₂ (269 mV) in alkaline electrolytes. Thus, this work highlights the practicality of designing mesoporous nonnoble metal structures and the importance of incorporating P in metallic-B-based alloys to modify their electronic structure for enhancing their intrinsic activity.

Al2O3 Dot and Antidot Array Synthesis in Hexagonally Packed Poly(styrene-block-methyl methacrylate) Nanometer-Thick Films for Nanostructure Fabrication

Nanostructured organic templates originating from self-assembled block copolymers (BCPs) can be converted into inorganic nanostructures by sequential infiltration synthesis (SIS). This capability is particularly relevant within the framework of advanced lithographic applications because of the exploitation of the BCP-based nanostructures as hard masks. In this work, Al₂O₃ dot and antidot arrays were synthesized by sequential infiltration of trimethylaluminum and water precursors into perpendicularly oriented cylinder-forming poly(styrene-block-methyl methacrylate) (PS-b-PMMA) BCP thin films. The mechanism governing the effective incorporation of Al₂O₃ into the PMMA component of the BCP thin films was investigated evaluating the evolution of the lateral and vertical dimensions of Al₂O₃ dot and antidot arrays as a function of the SIS cycle number. The not-reactive PS component and the PS/PMMA interface in self-assembled PS-b-PMMA thin films result in additional paths for diffusion and supplementary surfaces for sorption of precursor molecules, respectively. Thus, the mass uptake of Al₂O₃ into the PMMA block of self-assembled PS-b-PMMA thin films is higher than that in pure PMMA thin films.

Preparing Well-Defined Polyacrylamide-b-Polycarbonate by Integrating Photoiniferter Polymerization and TBD-Catalyzed ROP

The dual-initiator technique allows the polymerization of different monomers from orthogonal polymerization mechanisms to obtain block copolymers (BCPs). In this study, it is attempted to combine photoiniferter living free radical polymerization and organocatalytic ring-opening polymerization (ROP) to design a hydroxyl-functionalized carbamodithioate, i.e., 4-(hydroxymethyl)benzyl diethylcarbamodithioate (HBDC), which can integrate photoiniferter polymerization of acrylamide monomers and ROP of cyclic carbonates. As a proof of concept, the monomer applicability is further extended to acrylates and lactones. The results confirm that the two polymerization systems are experimentally compatible in a stepwise sequence as well as in a simultaneous one-pot process to synthesize BCPs. It is reasonable to assume that HBDC can allow for simple and efficient one-pot access to well-defined BCPs from a larger range of monomers, which is more advantageous from the operational, economical, and environmental points of view.

Self-template synthesis of mesoporous vanadium oxide nanospheres with intrinsic peroxidase-like activity and high antibacterial performance

Mesoporous vanadium oxide nanospheres are a very promising nanozyme for antibacterial and chemical sensing. However, controllable synthesis of mesoporous vanadium oxide nanospheres with uniform structure and small diameter (<200 nm) remains challenging. Herein, mesoporous vanadium oxide nanospheres (MVONs) with a small, uniform and adjustable particle size (52-105 nm), large mesopore size (5.1-5.8 nm), and high specific surface area (up to 63.7 m² g^-1) are constructed via a self-template strategy using tannic acid, formaldehyde and vanadium compounds as a polymerizable ligand, cross-linking agent and metal source, respectively. The relationships between synthesis conditions and material nanostructure are systematically investigated. The particle size and peroxidase-like activity of MVONs can be easily changed by adding different amounts of Pluronic block copolymer F127. Owing to the mesoporous structure, high specific surface area and small particle size, MVONs can effectively convert H₂O₂ into extremely toxic reactive oxygen species, and further kill Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus). This research establishes a universal, reliable method for synthesizing mesoporous vanadium oxide nanospheres, which might be used in catalysis, biosensors, and antibacterial treatment.

Helically aligned fused carbon hollow nanospheres with chiral discrimination ability

While the functions of carbon materials with precisely controlled nanostructures have been reported in many studies, their chiral discriminating abilities have not been reported yet. Herein, chiral discrimination is achieved using helical carbon materials devoid of chiral attachments. A Fe₃O₄ nanoparticle template with ethyl cellulose (carbon source) is self-assembled on dispersed multiwalled carbon nanotubes (MWCNTs) fixed in a lamellar structure, with helical nanoparticle alignment induced by the addition of a binaphthyl derivative. Carbonization followed by template removal produces helically aligned fused carbon hollow nanospheres (CHNSs) with no chiral molecules left. Helicity is confirmed using vacuum-ultraviolet circular dichroism spectroscopy. Chiral discrimination, as revealed by the electrochemical reactions of binaphthol and a chiral ferrocene derivative in aqueous and nonaqueous electrolytes, respectively, is attributable to the chiral space formed between the CHNS and MWCNT surfaces.

Highly porous nitrogen-doped carbon superstructures derived from the intramolecular cyclization-induced crystallization-driven self-assembly of poly(amic acid)

Hierarchically porous carbon nanomaterials have shown significant potential in electrochemical energy storage due to the promoted charge and mass transfer. Herein, a facile template-free method is proposed to prepare nitrogen-doped carbon superstructures (N-CSs) with multi-level pores by pyrolysis of polymeric precursors derived from the intramolecular cyclization-induced crystallization-driven self-assembly (ICI-CDSA) of poly(amic acid) (PAA). The excellent thermal stability of PAA enables the N-CSs to inherit the hierarchical structure of the precursors during pyrolysis, which facilitates the formation of meso- and macropores while the decomposition of the precursors promotes the creation of micropores. Electrochemical tests demonstrate the ultrahigh surface-area-normalized capacitance (76.5 μF cm-2) of the N-CSs facilitated by the hierarchically porous structure, promoting the charge and mass transfer, as well as the high utilization of pyridinic and pyrrolic nitrogen (12.9%) to provide significant pseudocapacitance contribution up to 40.6%. Considering the diversity of monomers of PAA, this ICI-CDSA strategy could be extended to prepare carbon nanomaterials with various morphologies, pore structures and chemical compositions.

Spherical mesoporous Fe-N-C single-atom nanozyme for photothermal and catalytic synergistic antibacterial therapy

Nanozyme has been regarded as an efficient antibiotic to kill bacteria using the reactive oxygen species (ROS) generated by Fenton-like reaction. However, its activity is still unsatisfied and requires large amount of hydrogen peroxide with side effects toward normal tissues. Herein, spherical mesoporous Fe-N-C single-atom nanozyme (SAzyme) is designed for antibacterial therapy via photothermal treatment enhanced Fenton-like catalysis process. Due to the large pore size (4.0 nm), high specific surface area (413.9 m² g^-1) and uniform diameter (100 nm), the catalytic performance of Fe-N-C SAzyme is greatly improved. The Michaelis-Menten constant (K_m) is 4.84 mmol L^-1, which is similar with that of horseradish peroxidase (3.7 mmol L^-1). Moreover, mesoporous Fe-N-C SAzyme shows high photothermal conversion efficiency (23.3 %) owing to the carbon framework. The catalytic activity can be enhanced under light irradiation due to the elevated reaction temperature. The bacteria can also be killed via physical heat effect. Due to the synergistic effect of nanozyme catalysis and photothermal treatment, the antibacterial performance is much higher than that using single antibacterial method. This work provides an alternative for combined antibacterial treatment via photothermal treatment assisted catalytic process using spherical mesoporous single-atom nanozyme as an antibiotic.

Laser-induced graphene (LIG)-driven medical sensors for health monitoring and diseases diagnosis

Laser-induced graphene (LIG) is a class of three-dimensional (3D) porous carbon nanomaterial. It can be prepared by direct laser writing on some polymer materials in the air. Because of its features of simplicity, fast production, and excellent physicochemical properties, it was widely used in medical sensing devices. This minireview gives an overview of the characteristics of LIG and LIG-driven sensors. Various methods for preparing graphene were compared and discussed. The applications of the LIG in biochemical sensors for ions, small molecules, microRNA, protein, and cell detection were highlighted. LIG-based physical physiological sensors and wearable electronics for medical applications were also included. Finally, our insights into current challenges and prospects for LIG-based medical sensing devices were presented.

Interfacial Assembly and Applications of Functional Mesoporous Materials

Functional mesoporous materials have gained tremendous attention due to their distinctive properties and potential applications. In recent decades, the self-assembly of micelles and framework precursors into mesostructures on the liquid-solid, liquid-liquid, and gas-liquid interface has been explored in the construction of functional mesoporous materials with diverse compositions, morphologies, mesostructures, and pore sizes. Compared with the one-phase solution synthetic approach, the introduction of a two-phase interface in the synthetic system changes self-assembly behaviors between micelles and framework species, leading to the possibility for the on-demand fabrication of unique mesoporous architectures. In addition, controlling the interfacial tension is critical to manipulate the self-assembly process for precise synthesis. In particular, recent breakthroughs based on the concept of the "monomicelles" assembly mechanism are very promising and interesting for the synthesis of functional mesoporous materials with the precise control. In this review, we highlight the synthetic strategies, principles, and interface engineering at the macroscale, microscale, and nanoscale for oriented interfacial assembly of functional mesoporous materials over the past 10 years. The potential applications in various fields, including adsorption, separation, sensors, catalysis, energy storage, solar cells, and biomedicine, are discussed. Finally, we also propose the remaining challenges, possible directions, and opportunities in this field for the future outlook.

Hydrophilic arginine-functionalized mesoporous polydopamine-graphene oxide composites for glycopeptides analysis

Considering the importance of glycopeptides in the clinical diagnosis of cancer and some serious diseases, the identification of glycopeptides from complex biological samples has attracted considerable attention. Effective pre-enrichment before mass spectrometry analysis plays an important role. In this work, a kind of hydrophilic two-dimensional composites (denoted as GO@MPDA@Arg) based on mesoporous polydopamine-graphene oxide were used to selectively enrich glycopeptides in biological samples. The mesoporous polydopamine (MPDA) layer self-assembled with template Pluronic F127 provided more binding sites to load arginine, and bound arginine enhanced the hydrophilicity of the material. As a result, GO@MPDA@Arg composites exhibited excellent enrichment performance for glycopeptides, containing good selectivity (IgG digests : BSA digests = 1:50, molar ratio), low detection limit for IgG digests (10 fmol μL^-1), high loading capacity for IgG digests (200 μg mg^-1), and good size exclusion (IgG digests : IgG : BSA = 1:100:100, mass ratio). In addition, mouse brain tissue was selected as the actual biological sample to further study the enrichment effect of GO@MPDA@Arg composites. In three parallel experiments, a total of 401 glycopeptides belonging to 233 glycoproteins were enriched from 200 μg digestion of mouse brain extract. The enrichment results demonstrate that GO@MPDA@Arg composites have application potential for glycopeptides enrichment in protein post-translational modification research.

Dissecting Biological and Synthetic Soft-Hard Interfaces for Tissue-Like Systems

Soft and hard materials at interfaces exhibit mismatched behaviors, such as mismatched chemical or biochemical reactivity, mechanical response, and environmental adaptability. Leveraging or mitigating these differences can yield interfacial processes difficult to achieve, or inapplicable, in pure soft or pure hard phases. Exploration of interfacial mismatches and their associated (bio)chemical, mechanical, or other physical processes may yield numerous opportunities in both fundamental studies and applications, in a manner similar to that of semiconductor heterojunctions and their contribution to solid-state physics and the semiconductor industry over the past few decades. In this review, we explore the fundamental chemical roles and principles involved in designing these interfaces, such as the (bio)chemical evolution of adaptive or buffer zones. We discuss the spectroscopic, microscopic, (bio)chemical, and computational tools required to uncover the chemical processes in these confined or hidden soft-hard interfaces. We propose a soft-hard interaction framework and use it to discuss soft-hard interfacial processes in multiple systems and across several spatiotemporal scales, focusing on tissue-like materials and devices. We end this review by proposing several new scientific and engineering approaches to leveraging the soft-hard interfacial processes involved in biointerfacing composites and exploring new applications for these composites.

Synthesis of Mesoporous CuO Hollow Sphere Nanozyme for Paper-Based Hydrogen Peroxide Sensor

Point-of-care monitoring of hydrogen peroxide is important due to its wide usage in biomedicine, the household and industry. Herein, a paper sensor is developed for sensitive, visual and selective detection of H2O2 using a mesoporous metal oxide hollow sphere as a nanozyme. The mesoporous CuO hollow sphere is synthesized by direct decomposition of copper-polyphenol colloidal spheres. The obtained mesoporous CuO hollow sphere shows a large specific surface area (58.77 m2/g), pore volume (0.56 cm3/g), accessible mesopores (5.8 nm), a hollow structure and a uniform diameter (~100 nm). Furthermore, they are proven to show excellent peroxidase-like activities with Km and Vmax values of 120 mM and 1.396 × 10-5 M·s-1, respectively. Such mesoporous CuO hollow spheres are then loaded on the low-cost and disposable filter paper test strip. The obtained paper sensor can be effectively used for detection of H2O2 in the range of 2.4-150 μM. This work provides a new kind of paper sensor fabricated from a mesoporous metal oxide hollow sphere nanozyme. These sensors could be potentially used in bioanalysis, food security and environmental protection.