Measurement of Solvent OH−π Interactions Using a Molecular Balance

Boron-Nitrogen-Embedded Polycyclic Aromatic Hydrocarbon-Based Controllable Hierarchical Self-Assemblies through Synergistic Cation-π and C-H···π Interactions for Bifunctional Photo- and Electro-Catalysis

Boron-Nitrogen-embedded polycyclic aromatic hydrocarbons (BN-PAHs) as novel π-conjugated systems have attracted immense attention owing to their superior optoelectronic properties. However, constructing long-range ordered supramolecular assemblies based on BN-PAHs remains conspicuously scarce, primarily attributed to the constraints arising from coordinating multiple noncovalent interactions and the intrinsic characteristics of BN-PAHs, which hinder precise control over delicate self-assembly processes. Herein, we achieve the successful formation of BN-PAH-based controllable hierarchical assemblies through synergistically leveraged cation-π and C-H···π interactions. By carefully adjusting the solvent conditions in two progressive assembly hierarchies, the one-dimensional (1D) supramolecular assemblies with "rigid yet flexible" assembled units are first formed by cation-π interactions, and then they can be gradually fused into two-dimensional (2D) structures under specific C-H···π interactions, thus realizing the precise control of the transformation process from BN-PAH-based 1D primary structures to 2D higher-order assemblies. The resulting 2D-BNSA, characterized by enhanced electrical conductivity and ordered 2D layered structure, provides anchoring and dispersion sites for loading two appropriate nanocatalysts, thus facilitating the efficient photocatalytic CO2 reduction (with a remarkable CH4 evolution rate of 938.7 μmol g-1 h-1) and electrocatalytic acetylene semihydrogenation (reaching a Faradaic efficiency for ethylene up to 98.5%).

Contributions of London Dispersion Forces to Solution-Phase Association Processes

ConspectusDespite their ubiquity and early discovery, London dispersion forces are often overlooked. This is due, in part, to the difficulty in assessing their contributions to molecular and polymeric structure, stability, properties, and reactivities. However, recent advances in modeling have revealed that dispersion interactions play an important role in many important chemical and biological processes. Experimental confirmation of their impact in solution has been challenging, leading to controversies about their relative importance.In the course of studying noncovalent interactions using molecular devices, our understanding and appreciation for the importance of dispersion interactions have evolved. This Account follows this intellectual journey by using examples from the literature. The goals are twofold: to describe recent advances in understanding the interaction and to provide guidance to researchers studying weak noncovalent interactions. However, first, the experimental methods for measuring the effects of dispersion interactions and the strategies for isolating their influence are described. These include the design of molecular devices to measure these weak noncovalent interactions and the strategies to disentangle the solvation, solvophobic, and dispersion components of the resulting equilibria.The literature examples are organized around five fundamental questions. (1) Do dispersion interactions have a measurable effect on solution equilibria? (2) To what extent do solvents attenuate or compensate for dispersion interactions? (3) To what extent do the solvation and solvophobic terms influence the dispersion equilibria? (4) Can we predict whether a system will form attractive dispersion or repulsive steric interactions? (5) Can the dispersion term be isolated and interrogated? We were often surprised by the answers to these questions. In each case, we describe how the systems were designed to address these questions and discuss possible interpretations of the results.While dispersion interactions in solution were weak (usually <1 kcal/mol), their influence on complexation and conformational equilibria can be observed and measured. This underscores the significance of these interactions in molecular recognition, coordination chemistry, reaction design, and catalysis. The solvent components of the dispersion equilibria can also be significant. Therefore, the isolation of the dispersion contributions from the solvation and solvophobic effects represents an ongoing challenge. The experimental studies also provide important benchmarks and offer valuable insights to help refine the next generation of computational solvent models.

Structural Studies of Monounsaturated and ω-3 Polyunsaturated Free Fatty Acids in Solution with the Combined Use οf NMR and DFT Calculations-Comparison with the Liquid State

Molecular structures, in chloroform and DMSO solution, of the free fatty acids (FFAs) caproleic acid, oleic acid, α-linolenic acid, eicosapentanoic acid (EPA) and docosahexaenoic acid (DHA) are reported with the combined use of NMR and DFT calculations. Variable temperature and concentration chemical shifts of the COOH protons, transient 1D NOE experiments and DFT calculations demonstrate the major contribution of low molecular weight aggregates of dimerized fatty acids through intermolecular hydrogen bond interactions of the carboxylic groups, with parallel and antiparallel interdigitated structures even at the low concentration of 20 mM in CDCl3. For the dimeric DHA, a structural model of an intermolecular hydrogen bond through carboxylic groups and an intermolecular hydrogen bond between the carboxylic group of one molecule and the ω-3 double bond of a second molecule is shown to play a role. In DMSO-d6 solution, NMR and DFT studies show that the carboxylic groups form strong intermolecular hydrogen bond interactions with a single discrete solvation molecule of DMSO. These solvation species form parallel and antiparallel interdigitated structures of low molecular weight, as in chloroform solution. This structural motif, therefore, is an intrinsic property of the FFAs, which is not strongly affected by the length and degree of unsaturation of the chain and the hydrogen bond ability of the solvent.

An investigation into the adsorption mechanism of n-butanol by ZIF-8: a combined experimental and ab initio molecular dynamics approach

The zeolitic imidazolate framework, ZIF-8, has been shown by experimental methods to have a maximum saturation adsorption capacity of 0.36 g g^-1 for n-butanol from aqueous solution, equivalent to a loading of 14 butanol molecules per unit cell or 7 molecules per sodalite β-cage. Diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) shows the presence of hydrogen bonding between adsorbed butanol molecules within the cage; the presence of three different O-H stretching modes indicates the formation of butanol clusters of varying size. Ab initio molecular dynamics simulations show the formation of intermolecular hydrogen bonding between the butanol molecules, with an average hydrogen-bond coordination number of 0.9 after 15 ps simulation time. The simulations also uniquely demonstrate the presence of weaker interactions between the alcohol O-H group and the π-orbital of the imidazole ring on the internal surface of the cage during early stages of adsorption. The calculated adsorption energy per butanol molecule is -33.7 kJ mol^-1, confirming that the butanol is only weakly bound, driven primarily by the hydrogen bonding. Solid-state MAS NMR spectra suggest that the adsorbed butanol molecules possess a reasonable degree of mobility in their adsorbed state, rather than being rigidly held in specific sites. 2D ¹³C-¹H heteronuclear correlation (HETCOR) experiments show interactions between the butanol aliphatic chain and the ZIF-8 framework experimentally, suggesting that O-H interactions with the π-orbital are only short lived. The insight gained from these results will allow the design of more efficient ways of recovering and isolating n-butanol, an important biofuel, from low-concentration solutions.

Thermally Controlled Exciplex Fluorescence in a Dynamic Homo[2]catenane

Motion-induced change in emission (MICE) is a phenomenon that can be employed to develop various types of probes, including temperature and viscosity sensors. Although MICE, arising from the conformational motion in particular compounds, has been studied extensively, this phenomenon has not been investigated in depth in mechanically interlocked molecules (MIMs) undergoing coconformational changes. Herein, we report the investigation of a thermoresponsive dynamic homo[2]catenane incorporating pyrene units and displaying relative circumrotational motions of its cyclophanes as evidenced by variable-temperature ¹H NMR spectroscopy and supported by its visualization through molecular dynamics simulations and quantum mechanics calculations. The relative coconformational motions induce a significant change in the fluorescence emission of the homo[2]catenane upon changes in temperature compared with its component cyclophanes. This variation in the exciplex emission of the homo[2]catenane is reversible as demonstrated by four complete cooling and heating cycles. This research opens up possibilities of using the coconformational changes in MIMs-based chromophores for probing fluctuations in temperature which could lead to applications in biomedicine or materials science.

Evidence for Oxonium Ions in Ethereal "Hydrogen Chloride"

Although solutions of hydrogen chloride in ethereal solvents like diethyl ether or dioxane are commonly employed in the laboratory, the solution structure of these reagents has yet to be firmly established. Here, we analyze solutions of ethereal hydrogen chloride or deuterium chloride in toluene, in dichloromethane, or in the absence of a co-solvent by in situ infrared spectroscopy. The resulting spectra are inconsistent with free HCl or often-proposed 1:1 HCl-ether complexes but closely match the predicted spectra of oxonium ions generated via protonation of diethyl ether. Molecular dynamics simulation of the oxonium chloride complexes provides evidence for an outer-sphere contact ion pair. These results suggest new approaches for tuning the acidity of strong Brønsted acids in organic solvents and demonstrate the importance of conducting spectroscopic measurements under reaction-relevant conditions.

Quantifying Solvophobic Effects in Organic Solvents Using a Hydrocarbon Molecular Balance

We evaluate the use of the cohesive energy density (ced) as a quantitative descriptor for solvophobic effects in organic solvents by measuring ΔG_Z/E of the rigid Z- and E-2,2'-diethynyl-9,9'-bifluorenylidene. In line with previously employed balances, solvent-dependent changes in ΔG_Z/E are predominantly induced by solvophobic effects, leading to a strong correlation with the solvent's ced. We re-emphasize the role of ceds as quantitative descriptors of solvophobic effects of organic solvents. Our experimental findings are well supported by B3LYP-D3/def2TZVP computations.

N-Arylimide Molecular Balances: A Comprehensive Platform for Studying Aromatic Interactions in Solution

Noncovalent interactions of aromatic surfaces play a key role in many biological processes and in determining the properties and utility of synthetic materials, sensors, and catalysts. However, the study of aromatic interactions has been challenging because these interactions are usually very weak and their trends are modulated by many factors such as structural, electronic, steric, and solvent effects. Recently, N-arylimide molecular balances have emerged as highly versatile and effective platforms for studying aromatic interactions in solution. These molecular balances can accurately measure weak noncovalent interactions in solution via their influence on the folded-unfolded conformational equilibrium. The structure (i.e., size, shape, π-conjugation, and substitution) and nature (i.e., element, charge, and polarity) of the π-surfaces and interacting groups can be readily varied, enabling the study of a wide range of aromatic interactions. These include aromatic stacking, heterocyclic aromatic stacking, and alkyl-π, chalcogen-π, silver-π, halogen-π, substituent-π, and solvent-π interactions. The ability to measure a diverse array of aromatic interactions within a single model system provides a unique perspective and insights as the interaction energies, stability trends, and solvent effects for different types of interactions can be directly compared. Some broad conclusions that have emerged from this comprehensive analysis include: (1) The strongest aromatic interactions involve groups with positive charges such as pyridinium and metal ions which interact with the electrostatically negative π-face of the aromatic surface via cation-π or metal-π interactions. Attractive electrostatic interactions can also form between aromatic surfaces and groups with partial positive charges. (2) Electrostatic interactions involving aromatic surfaces can be switched from repulsive to attractive using electron-withdrawing substituents or heterocycles. These electrostatic trends appear to span many types of aromatic interactions involving a polar group interacting with a π-surface such as halogen-π, chalcogen-π, and carbonyl-π. (3) Nonpolar groups form weak but measurable stabilizing interactions with aromatic surfaces in organic solvents due to favorable dispersion and/or solvophobic effects. A good predictor of the interaction strength is provided by the change in solvent-accessible surface area. (4) Solvent effects modulate the aromatic interactions in the forms of solvophobic effects and competitive solvation, which can be modeled using solvent cohesion density and specific solvent-solute interactions.

The Solvent Effect on Weak Interactions in Supramolecular Polymers: Differences between Small Molecular Probes and Supramolecular Polymers

In this minireview, weak interactions that occur in supramolecular polymers are discussed. Combination of weak and strong interactions plays an important role in the construction of supramolecular polymers. It is beneficial to separate the contributions of the weak interactions, as well as each solvent effect on the weak interactions. However, it is generally difficult to observe each solvent effect separately at work in each interaction. Small molecular probes are useful to estimate the contributions of the weak interaction. But, the results should be treated with caution when applied to supramolecular polymer systems. To overcome the problems, a new solvent parameter, solvation ability (SA), is introduced, which was determined on the balance point of extended and stacked forms of porphyrin-based interconvertible supramolecular polymers.

Shedding Light on the Interactions of Hydrocarbon Ester Substituents upon Formation of Dimeric Titanium(IV) Triscatecholates in DMSO Solution

The dissociation of hierarchically formed dimeric triple lithium bridged triscatecholate titanium(IV) helicates with hydrocarbyl esters as side groups is systematically investigated in DMSO. Primary alkyl, alkenyl, alkynyl as well as benzyl esters are studied in order to minimize steric effects close to the helicate core. The 1 H NMR dimerization constants for the monomer-dimer equilibrium show some solvent dependent influence of the side chains on the dimer stability. In the dimer, the ability of the hydrocarbyl ester groups to aggregate minimizes their contacts with the solvent molecules. Due to this, most solvophobic alkyl groups show the highest dimerization tendency followed by alkenyls, alkynyls and finally benzyls. Furthermore, trends within the different groups of compounds can be observed. For example, the dimer is destabilized by internal double or triple bonds due to π-π repulsion. A strong indication for solvent supported London dispersion interaction between the ester side groups is found by observation of an even/odd alternation of dimerization constants within the series of n-alkyls, n-Ω-alkenyls or n-Ω-alkynyls. This corresponds to the interaction of the parent hydrocarbons, as documented by an even/odd melting point alternation.

Interplay between n→π* Interactions and Dynamic Covalent Bonds: Quantification and Modulation by Solvent Effects

Orbital donor-acceptor interactions play critical roles throughout chemistry, and hence, their regulation and functionalization are of great significance. Herein we demonstrate for the first time the investigation of n→π* interactions through the strategy of dynamic covalent chemistry (DCC), and we further showcase its use in the stabilization of imine. The n→π* interaction between donor X and acceptor aldehyde/imine within 2-X-2'-formylbiphenyl derivatives was found to significantly influence the thermodynamics of imine exchange. The orbital interaction was then quantified through imine exchange, the equilibrium of which was successfully correlated with the difference in natural bond orbital stabilization energy of n→π* interactions of aldehyde and its imine. Moreover, the examination of solvent effects provided insights into the distinct feature of the modulation of n→π* interaction with aprotic and protic solvents. The n→π* interaction involving imine was enhanced in protic solvents due to hydrogen bonding with the solvent. This finding further enabled the stabilization of imine in purely aqueous solution. The strategies and results reported should find application in many fields, including molecular recognition, biological labeling, and asymmetric catalysis.

Supramolecular cage encapsulation as a versatile tool for the experimental quantification of aromatic stacking interactions

The widespread presence of aromatic stacking interactions in chemical and biological systems, combined with their relatively small energetic contribution, have led to a plethora of theoretical and experimental studies for their quantification and rationalization. Typically, π-π aromatic interactions are studied as a function of substituents to gather information about the interaction mechanism. While experiments suggest that aromatic interactions are dominated by local electrostatic contacts between π-electron density and CH groups, theoretical work has raised the possibility that direct electrostatic interactions between local dipoles of the substituents may play a role. We describe a supramolecular cage that binds two aromatic carboxylates in a stacked geometry such that the aromatic substituents are remote in space. Chemical Double Mutant Cycles (DMCs) were used to measure fifteen different aromatic stacking interactions as a function of substituent (NMe2, OMe, Me, Cl and NO2). When both aromatic rings have electron-withdrawing nitro substituents, the interaction is attractive (-2.8 kJ mol-1) due to reduced π-electron repulsion. When both aromatic rings have electron-donating di-methylamino substituents, the interaction is repulsive (+2.0 kJ mol-1) due to increased π-electron repulsion. The results show that aromatic stacking interactions are dominated by short range electrostatic contacts rather than substituent dipole interactions.

Study of through-space substituent–π interactions using N-phenylimide molecular balances

Substituent–π interactions associated with aromatic stacking interactions were experimentally measured using a small N-phenylimide molecular balance model system.

Self-Assembly of Nanocubic Molecular Capsules via Solvent-Guided Formation of Rectangular Blocks

We investigate the mechanism underlying the self-assembly of gear-shaped amphiphilic molecules into a highly ordered nanocubic capsule ("nanocube") in aqueous methanol. Simulation results show that the solvent molecules play a significant role in the assembly process by directing the primitive intermediates to orthogonal/rectangular shapes, thus creating appropriate building blocks for cubic assembly while avoiding off-pathway stacked aggregates. Free-energy analyses reveal that the interplay of the direct intermonomer interaction and the solvent-mediated repulsion between large aromatic cores (via preferential solvation of methanol on hydrophobic surfaces) leads to the strong trend for perpendicular binding of monomers and hence the solvent-guided formation of rectangular blocks. Furthermore, we report the self-assembly simulation of the nanocube using replica exchange with solute tempering and demonstrate that the simulation can predict a highly ordered nanocapsule structure, assembly intermediates, and encapsulated molecules, which helps promote computer-aided design of functional molecular self-assemblies in explicit solvent.

Tipping the Balance between S-π and O-π Interactions

A comprehensive experimental survey consisting of 36 molecular balances was conducted to compare 18 pairs of S-π versus O-π interactions over a wide range of structural, geometric, and solvent parameters. A strong linear correlation was observed between the folding energies of the sulfur and oxygen balances across the entire library of balance pairs. The more stable interaction systematically switched from the O-π to S-π interaction. Computational studies of bimolecular PhSCH₃-arene and PhOCH₃-arene complexes were able to replicate the experimental trends in the molecular balances. The change in preference for the O-π to S-π interaction was due to the interplay of stabilizing (dispersion and solvophobic) and destabilizing (exchange-repulsion) terms arising from the differences in size and polarizability of the oxygen and sulfur atoms.

The phenyl vinyl ether-methanol complex: a model system for quantum chemistry benchmarking

The structure of the isolated aggregate of phenyl vinyl ether and methanol is studied by combining a multi-spectroscopic approach and quantum-chemical calculations in order to investigate the delicate interplay of noncovalent interactions. The complementary results of vibrational and rotational spectroscopy applied in molecular beam experiments reveal the preference of a hydrogen bond of the methanol towards the ether oxygen (OH∙∙∙O) over the π-docking motifs via the phenyl and vinyl moieties, with an additional less populated OH∙∙∙P(phenyl)-bound isomer detected only by microwave spectroscopy. The correct prediction of the energetic order of the isomers using quantum-chemical calculations turns out to be challenging and succeeds with a sophisticated local coupled cluster method. The latter also yields a quantification as well as a visualization of London dispersion, which prove to be valuable tools for understanding the role of dispersion on the docking preferences. Beyond the structural analysis of the electronic ground state (S₀), the electronically excited (S₁) state is analyzed, in which a destabilization of the OH∙∙∙O structure compared to the S₀ state is observed experimentally and theoretically.

Anion-enhanced solvophobic effects in organic solvent

Molecular balanced measured a two-fold anion-induced enhancement of the solvophobic effect in organic solvents.

Chasing Weak Forces: Hierarchically Assembled Helicates as a Probe for the Evaluation of the Energetics of Weak Interactions

London dispersion forces are the weakest interactions between molecules. Because of this, their influence on chemical processes is often low, but can definitely not be ignored, and even becomes important in cases of molecules with large contact surfaces. Hierarchically assembled dinuclear titanium(IV) helicates represent a rare example in which the direct observation of London dispersion forces is possible in solution even in the presence of strong cohesive solvent effects. Hereby, the dispersion forces do not unlimitedly support the formation of the dimeric complexes. Although they have some favorable enthalpic contribution to the dimerization of the monomeric complex units, large flexible substituents become conformationally restricted by the interactions leading to an entropic disadvantage. The dimeric helicates are entropically destabilized.

The Structure of Ethylbenzene, Styrene and Phenylacetylene Determined by Total Neutron Scattering

Organic solvents such as phenylacetylene, styrene and ethylbenzene are widely used in industrial processes, especially in the production of rubber or thermoplastics. Despite their important applications detailed knowledge about their structure is limited. In this paper the structures of these three aromatic solvents were investigated using neutron diffraction. The results show that many of their structural characteristics are similar, although the structure of phenylacetylene is more ordered and has a smaller solvation sphere than either ethylbenzene or styrene. Two regions within the first coordination sphere, in which the surrounding molecules show different preferable orientations with respect to the central molecule, were found for each liquid. Additionally, the localisation of the aliphatic chains reveals that they tend to favour closer interactions with each other than to the aromatic rings of the adjacent molecules.