Transformation of Metal–Organic Framework Secondary Building Units into Hexanuclear Zr-Alkyl Catalysts for Ethylene Polymerization

A Gradient Solid-like Electrolyte Stabilizing Zn Anodes by In Situ Formation of a ZnSe Interphase

Rechargeable aqueous Zn-ion batteries are renowned for their safety, cost-effectiveness, environmental friendliness, and high capacity. However, critical issues, such as restricted electrode kinetics and uncontrolled dendrite growth of Zn anodes, have hindered their practical applications. Here, we propose a gradient solid-like electrolyte (GSLE) to enhance the overall performance of Zn anodes and Zn-ion batteries. It shows a high room-temperature conductivity of 13.3 mS cm-1 with an enhanced Zn2+ transference number of 0.67. With its negatively charged network, the GSLE establishes a Zn2+-rich region at the Zn|electrolyte interface, thereby boosting the interfacial charge transfer and accelerating electrode kinetics. Moreover, the GSLE in situ establishes a ZnSe-containing interphase on the surface of Zn anodes during cycling. Such an interphase effectively guides uniform Zn deposition and inhibits side reactions. As a result, symmetric cells using the GSLE demonstrate stabilized Zn plating/stripping cycling over 1400 h and tolerate a high critical current of 15 mA cm-2. Furthermore, the assembled vanadium-based full cells deliver a remarkable capacity of 125.4 mAh g-1 at 4 A g-1 and achieve a 90% capacity retention after 1000 cycles.

Pyrolytic Depolymerization of Polyolefins Catalysed by Zirconium-based UiO-66 Metal-Organic Frameworks

Polyolefins such as polyethylenes and polypropylenes are the most-produced plastic waste globally, yet are difficult to convert into useful products due to their unreactivity. Pyrolysis is a practical method for large-scale treatment of mixed, contaminated plastic, allowing for their conversion into industrially-relevant petrochemicals. Metal-organic frameworks (MOFs), despite their tremendous utility in heterogeneous catalysis, have been overlooked for polyolefin depolymerization due to their perceived thermal instabilities and inability of polyethylenes and polypropylenes to penetrate their pores. Herein, we demonstrate the viability of UiO-66 MOFs containing coordinatively-unsaturated zirconium nodes, as effective catalysts for pyrolysis that significantly enhances the yields of valuable liquid and gas hydrocarbons, whilst halving the amounts of residual solids produced. Reactions occur on the Lewis-acidic UiO-66 nodes, without the need for noble metals, and yield aliphatic product distributions distinctly different from the aromatic-rich hydrocarbons that can be obtained from zeolite catalysis. We also demonstrate the first unambiguous characterization of polyolefin penetration into UiO-66 pores at pyrolytic temperatures, allowing access to the abundant Zr-oxo nodes within the MOF interior for efficient C-C cleavage. Our work highlights the potential of MOFs as highly-designable heterogeneous catalysts for depolymerisation of plastics, which can complement conventional catalysts in reactivity.

Design and Advanced Manufacturing of NU-1000 Metal-Organic Frameworks with Future Perspectives for Environmental and Renewable Energy Applications

Metal-organic frameworks (MOFs) represent a relatively new family of materials that attract lots of attention thanks to their unique features such as hierarchical porosity, active metal centers, versatility of linkers/metal nodes, and large surface area. Among the extended list of MOFs, Zr-based-MOFs demonstrate comparably superior chemical and thermal stabilities, making them ideal candidates for energy and environmental applications. As a Zr-MOF, NU-1000 is first synthesized at Northwestern University. A comprehensive review of various approaches to the synthesis of NU-1000 MOFs for obtaining unique surface properties (e.g., diverse surface morphologies, large surface area, and particular pore size distribution) and their applications in the catalysis (electro-, and photo-catalysis), CO2 reduction, batteries, hydrogen storage, gas storage/separation, and other environmental fields are presented. The review further outlines the current challenges in the development of NU-1000 MOFs and their derivatives in practical applications, revealing areas for future investigation.

Covalent Organic Framework-Supported Metallocene for Ethylene Polymerization

The loading of homogeneous catalysts with support can dramatically improve their performance in olefin polymerization. However, the challenge lies in the development of supported catalysts with well-defined pore structures and good compatibility to achieve high catalytic activity and product performance. Herein, we report the use of an emergent class of porous material-covalent organic framework material (COF) as a carrier to support metallocene catalyst-Cp2 ZrCl2 for ethylene polymerization. The COF-supported catalyst demonstrates a higher catalytic activity of 31.1×106  g mol-1  h-1 at 140 °C, compared with 11.2×106  g mol-1  h-1 for the homogenous one. The resulting polyethylene (PE) products possess higher weight-average molecular weight (Mw ) and narrower molecular weight distribution (Ð) after COF supporting, that is, Mw increases from 160 to 308 kDa and Ð drops from 3.3 to 2.2. The melting point (Tm ) is also increased by up to 5.2 °C. Moreover, the PE product possesses a characteristic filamentous microstructure and demonstrates an increased tensile strength from 19.0 to 30.7 MPa and elongation at break from 350 to 1400 % after catalyst loading. We believe that the use of COF carriers will facilitate the future development of supported catalysts for highly efficient olefin polymerization and high-performance polyolefins.

MOFs as Versatile Catalysts: Synthesis Strategies and Applications in Value-Added Compound Production

Catalysts played a crucial role in advancing modern human civilization, from ancient times to the industrial revolution. Due to high cost and limited availability of traditional catalysts, there is a need to develop cost-effective, high-activity, and nonprecious metal-based electrocatalysts. Metal-organic frameworks (MOFs) have emerged as an ideal candidate for heterogeneous catalysis due to their physicochemical properties, hybrid inorganic/organic structures, uncoordinated metal sites, and accessible organic sections. MOFs are high nanoporous crystalline materials that can be used as catalysts to facilitate polymerization reactions. Their chemical and structural diversity make them effective for various reactions compared to traditional catalysts. MOFs have been applied in gas storage and separation, ion-exchange, drug delivery, luminescence, sensing, nanofilters, water purification, and catalysis. The review focuses on MOF-enabled heterogeneous catalysis for value-added compound production, including alcohol oxidation, olefin oligomerization, and polymerization reactions. MOFs offer tunable porosity, high spatial density, and single-crystal XRD control over catalyst properties. In this review, MOFs were focused on reactions of CO2 fixation, CO2 reduction, and photoelectrochemical water splitting. Overall, MOFs have great potential as versatile catalysts for diverse applications in the future.

Nanoscale designing of metal organic framework moieties as efficient tools for environmental decontamination

Environmental pollutants, being a major and detrimental component of the ecological imbalance, need to be controlled. Serious health issues can get intensified due to contaminants present in the air, water, and soil. Accurate and rapid monitoring of environmental pollutants is imperative for the detoxification of the environment and hence living beings. Metal-organic frameworks (MOFs) are a class of porous and highly diverse adsorbent materials with tunable surface area and diverse functionality. Similarly, the conversion of MOFs into nanoscale regime leads to the formation of nanometal-organic frameworks (NMOFs) with increased selectivity, sensitivity, detection ability, and portability. The present review majorly focuses on a variety of synthetic methods including the ex situ and in situ synthesis of MOF nanocomposites and direct synthesis of NMOFs. Furthermore, a variety of applications such as nanoabsorbent, nanocatalysts, and nanosensors for different dyes, antibiotics, toxic ions, gases, pesticides, etc., are described along with illustrations. An initiative is depicted hereby using nanostructures of MOFs to decontaminate hazardous environmental toxicants.

Boosting Catalytic Performance of MOF-808(Zr) by Direct Generation of Rich Defective Zr Nodes via a Solvent-Free Approach

Creation of rich open metal sites (defect) on the nodes of metal-organic frameworks (MOFs) is an efficient approach to enhance their catalytic performance in heterogeneous reactions; however, direct generation of such defects remains challenging. In this contribution, we developed an in situ green route for rapid fabrication of defective MOF-808(Zr) with rich Zr-OH/OH₂ sites (occupying 25% Zr coordination sites) and hierarchical porosity without the assistance of formic acid and solvent. The optimal MOF-808(Zr) not only displayed superior activity in oxidative desulfurization (ODS) for removing 1000 ppm sulfur at ambient temperature within 20 min but also could convert 3.8 mmol of benzaldehyde to (dimethoxymethyl)benzene within 90 s at 30 °C. The turnover frequencies reached 45.4 h^-1 for ODS and 3451 h^-1 for acetalization, outperforming the most reported MOF-based catalysts. Theoretical calculation and experimental results show that the formed Zr-OH/OH₂ can react with H₂O₂ to generate peroxo-zirconium species, which readily oxidize the sulfur compound. Our work provides a new approach to the synthesis of defect-rich MOF-808(Zr) with the accessibility of active sites for target reactions.

Microenvironment Modulation of Metal-Organic Frameworks (MOFs) for Coordination Olefin Oligomerization and (co)Polymerization

The majority of commercial polyolefins are produced by coordination polymerization using early or late transition metal catalysts. Molecular catalysts containing these transition metals (Ti, Zr, Cr, Ni, and Fe, etc.) are loaded on supports for controlled polymerization behavior and polymer morphology in slurry or gas phase processes. Within the last few years, metal-organic frameworks (MOFs), a class of unique porous crystalline materials constructed from metal ions/clusters and organic ligands, have been designed and utilized as excellent supports for heterogeneous polymerization catalysis whose high density and uniform distribution of active sites would benefit the modulations of molecular weight distributions of high-performance olefin oligomers and (co)polymers. Impressive efforts have been made to modulate the microenvironment surrounding the active centers at the atomic level for improved activities of MOFs-based catalysts and controlled selectivity of olefin insertion. This review aims to draw a comprehensive picture of MOFs for coordination olefin oligomerization and (co)polymerization in the past decades with respect to different transition metal active centers, various incorporation sites, and finally microenvironment modulation. In consideration of more efforts are needed to overcome challenges for further industrial and commercial application, a brief outlook is provided.

Molecular Sieving of Propylene from Propane in Metal-Organic Framework-Derived Ultramicroporous Carbon Adsorbents

The development of adsorption-based separation processes alternative to the energy-intensive cryogenic distillation for a mixture of propylene and propane remains essential but challenging in gas industries. Molecular sieving separation of C₃H₆/C₃H₈ on stable carbon adsorbents appeals to be promising, while it is quite challenging to realize due to the random distributions and arrangements of the internal pores in common carbons. Herein, a series of polysaccharide-based CD-MOF-derived ultramicroporous carbon adsorbents with their pore size tuned at a subangstrom level were prepared. Molecular sieving separation of C₃H₆/C₃H₈ was realized on the optimal C-CDMOF-2-700 owing to the delicate structure with an appropriate pore size (5.0 Å). Besides, C-CDMOF-2-700 exhibited a high C₃H₆ uptake of 1.97 mmol g^-1 under ambient conditions. An ultrahigh uptake ratio of C₃H₆/C₃H₈ at 1.0 kPa (403) was also achieved, outperforming all reported adsorbents. Kinetic adsorption tests and breakthrough experiments further demonstrate this well-designed carbon adsorbent to be promising in industrial C₃H₆/C₃H₈ separation.

Sidechain Metallopolymers with Precisely Controlled Structures: Synthesis and Application in Catalysis

Inspired by the cooperative multi-metallic activation in metalloenzyme catalysis, artificial enzymes as multi-metallic catalysts have been developed for improved kinetics and higher selectivity. Previous models about multi-metallic catalysts, such as cross-linked polymer-supported catalysts, failed to precisely control the number and location of their active sites, leading to low activity and selectivity. In recent years, metallopolymers with metals in the sidechain, also named as sidechain metallopolymers (SMPs), have attracted much attention because of their combination of the catalytic, magnetic, and electronic properties of metals with desirable mechanical and processing properties of polymeric backbones. Living and controlled polymerization techniques provide access to SMPs with precisely controlled structures, for example, controlled degree of polymerization (DP) and molecular weight dispersity (Đ), which may have excellent performance as multi-metallic catalysts in a variety of catalytic reactions. This review will cover the recent advances about SMPs, especially on their synthesis and application in catalysis. These tailor-made SMPs with metallic catalytic centers can precisely control the number and location of their active sites, exhibiting high catalytic efficiency.

Carbon Dioxide Capture Chemistry of Amino Acid Functionalized Metal-Organic Frameworks in Humid Flue Gas

Metal-organic framework-808 has been functionalized with 11 amino acids (AA) to produce a series of MOF-808-AA structures. The adsorption of CO₂ under flue gas conditions revealed that glycine- and dl-lysine-functionalized MOF-808 (MOF-808-Gly and -dl-Lys) have the highest uptake capacities. Enhanced CO₂ capture performance in the presence of water was observed and studied by using single-component sorption isotherms, CO₂/H₂O binary isotherm, and dynamic breakthrough measurements. The key to the favorable performance was uncovered by deciphering the mechanism of CO₂ capture in the pores and attributed to the formation of bicarbonate as evidenced by ¹³C and ¹⁵N solid-state nuclear magnetic resonance spectroscopy studies. On the basis of these results, we examined the performance of MOF-808-Gly in simulated coal flue gas conditions and found that it is possible to capture and release CO₂ by vacuum swing adsorption. MOF-808-Gly was cycled at least 80 times with full retention of performance. This study significantly advances our understanding of CO₂ chemistry in MOFs by revealing how strongly bound amine moieties to the MOF backbone create the chemistry and environment within the pores, leading to the binding and release of CO₂ under mild conditions without application of heat.

MOF-enabled confinement and related effects for chemical catalyst presentation and utilization

A defining characteristic of nearly all catalytically functional MOFs is uniform, molecular-scale porosity. MOF pores, linkers and nodes that define them, help regulate reactant and product transport, catalyst siting, catalyst accessibility, catalyst stability, catalyst activity, co-catalyst proximity, composition of the chemical environment at and beyond the catalytic active site, chemical intermediate and transition-state conformations, thermodynamic affinity of molecular guests for MOF interior sites, framework charge and density of charge-compensating ions, pore hydrophobicity/hydrophilicity, pore and channel rigidity vs. flexibility, and other features and properties. Collectively and individually, these properties help define overall catalyst functional behaviour. This review focuses on how porous, catalyst-containing MOFs capitalize on molecular-scale confinement, containment, isolation, environment modulation, energy delivery, and mobility to accomplish desired chemical transformations with potentially superior selectivity or other efficacy, especially in comparison to catalysts in homogeneous solution environments.

Facile synthesis of MOF-808/AgI Z-scheme heterojunction with improved photocatalytic performance for the degradation of tetracycline hydrochloride under simulated sunlight

The MOF-808/AgI Z-scheme heterojunction expanded the light absorption range and promoted the separation of electron–hole pairs, thus enhancing the photocatalytic activity.

Enhanced Adsorption and Mass Transfer of Hierarchically Porous Zr-MOF Nanoarchitectures toward Toxic Chemical Removal

Zirconium-based metal-organic frameworks (Zr-MOFs) have shown tremendous prospects as highly efficient adsorbents against toxic chemicals under ambient conditions. Here, we report for the first time the enhanced toxic chemical adsorption and mass transfer properties of hierarchically porous Zr-MOF nanoarchitectures. A general and scalable sol-gel-based strategy combined with facile ambient pressure drying (APD) was utilized to construct MOF-808, MOF-808-NH₂, and UiO-66-NH₂ xerogel monoliths, denoted as G808, G808-NH₂, and G66-NH₂, respectively. The resulting Zr-MOF xerogels demonstrated 3D porous networks assembled by nanocrystal aggregates, with substantially higher mesoporosities than the precipitate analogues. Microbreakthrough tests on powders and tube breakthrough experiments on engineered granules were conducted at different relative humidities to comprehensively evaluate the NO₂ adsorption capabilities. The Zr-MOF xerogels showed considerably better NO₂ removal abilities than the precipitates, whether intrinsically or under simulated respirator canister/protection filter environment conditions. Multiple physicochemical characterizations were conducted to illuminate the NO₂ filtration mechanisms. Analysis on adsorption kinetics and mass transfer patterns in Zr-MOF xerogels was further performed to visualize the underlying structure-activity relationship using the gravimetric uptake and zero length column methods with cyclohexane and acetaldehyde as probes. The results revealed that the synergy of hierarchical porosities and nanosized crystals could effectively expedite the intracrystalline diffusion for the G66-NH₂ xerogel as well as alleviate the surface resistance for the G808-NH₂ xerogel, which led to accelerated overall adsorption uptake and thus enhanced performance toward toxic chemical removal.

Wiggling Mesopores Kinetically Amplify the Adsorptive Separation of Propylene/Propane

Adsorptive separation is an appealing technology for propylene and propane separation; however, the challenge lies in the design of efficient adsorbents which can distinguish the two molecules having very similar properties. Here we report a kinetically amplified separation by creating wiggling mesopores in structurally robust carbon monoliths. The wiggling mesopores with alternating wide and narrow segments afford a surface area of 413 m²  g^-1 and a tri-modal pore size distribution centered at 1.5, 4.2 and 6.6 nm, respectively. The synergistically kinetic and equilibrium effects were observed and quantitatively assessed, which together ensured a remarkable propylene/propane selectivity up to 39. This selectivity outperformed not only the available carbon adsorbents but also highly competitive among the dominated crystalline porous adsorbents. In addition, the wiggling mesoporous carbon adsorbent showed excellent dynamical separation stability, which ensured its great potential in practical molecular separations.

Influence of Pore Structure and Metal-Node Geometry on the Polymerization of Ethylene over Cr-Based Metal-Organic Frameworks

Metal-organic frameworks (MOFs) have received increasing interest as solid single-site catalysts, owing to their tunable pore architecture and metal node geometry. The ability to exploit these modulators makes them prominent candidates for producing polyethylene (PE) materials with narrow dispersity index (Ð) values. Here a study is presented in which the ethylene polymerization properties, with Et2 AlCl as activator, of three renowned Cr-based MOFs, MIL-101(Cr)-NDC (NDC=2,6-dicarboxynapthalene), MIL-53(Cr) and HKUST-1(Cr), are systematically investigated. Ethylene polymerization reactions revealed varying catalytic activities, with MIL-101(Cr)-NDC and MIL-53(Cr) being significantly more active than HKUST-1(Cr). Analysis of the PE products revealed large Ð values, demonstrating that polymerization occurs over a multitude of active Cr centers rather than a singular type of Cr site. Spectroscopic experiments, in the form of powder X-ray diffraction (pXRD), UV/Vis-NIR diffuse reflectance spectroscopy (DRS) and CO probe molecule Fourier transform infrared (FTIR) spectroscopy corroborated these findings, indicating that indeed for each MOF unique active sites are generated, however without alteration of the original oxidation state. Furthermore, the pXRD experiments indicated that one major prerequisite for catalytic activity was the degree of MOF activation by the Et2 AlCl co-catalyst, with the more active materials portraying a larger degree of activation.

Unprecedented Application of Covalent Organic Frameworks for Polymerization Catalysis: Rh/TPB-DMTP-COF in Polymerization of Phenylacetylene and Its Functional Derivatives

Covalent organic frameworks (COFs) are applied widely in organic catalysis; however, no precedent has been reported in polymerization catalysis. Herein, we report the new application of COFs for polymerization catalysis. Different amounts of homogeneous Rh catalyst are incorporated into the COF via post-treatment to give a series of TPB-DMTP-COF-X wt % Rh (b-e) containing varying amounts of Rh from 2.74 to 11.38 wt %. In contrast to the known Rh catalysts, TPB-DMTP-COF-X wt % Rh (b-e) display an uncommon synergistic effect and exceptional steric confinement effect of nanochannels. Therefore, they possess the advantages of both homogeneous catalysts in high activity and selectivity and heterogeneous catalysts in stability and recyclability with extremely high activity up to 1.3 × 10⁷ g·mol_Rh^-1·h^-1 and cis-selectivity up to 99% and can be readily recycled and reused five times in the polymerization of phenylacetylene and its derivatives, affording cis-transoidal polyphenylacetylene and its derivatives having helical structures, aggregation-induced emission properties, or fluorescence properties with narrow molecular weight distributions.

Polymethylaluminoxane organic frameworks (sMAOF) – highly active supports for slurry phase ethylene polymerisation

A series of modified solid polymethylaluminoxane (sMAO) catalyst supports have been developed for slurry phase ethylene polymerisation, using aryl di-ol modifier groups.

Sulfate-functionalized metal–organic frameworks supporting Pd nanoparticles for the hydrogenolysis of glycerol to 1,2-propanediol

Installing sulfate and Pd in MOF-808 achieved glycerol conversion to 1,2-PDO via selective hydrogenolysis.

Recent Advances in the Application of Metal–Organic Frameworks for Polymerization and Oligomerization Reactions

Polymers have become one of the major types of materials that are essential in our daily life. The controlled synthesis of value-added polymers with unique mechanical and chemical properties have attracted broad research interest. Metal–organic framework (MOF) is a class of porous material with immense structural diversity which offers unique advantages for catalyzing polymerization and oligomerization reactions including the uniformity of the catalytic active site, and the templating effect of the nano-sized channels. We summarized in this review the important recent progress in the field of MOF-catalyzed and MOF-templated polymerizations, to reveal the chemical principle and structural aspects of these systems and hope to inspire the future design of novel polymerization systems with improved activity and specificity.

A polythiophene/UiO-66 composite coating for extraction of volatile organic compounds migrated from ion-exchange resins prior to their determination by gas chromatography

A Poly (3,4-ethylenedioxothiophene) (PEDOT)/UiO-66 composite was electrodeposited on an etched stainless-steel wire as head-space solid-phase microextraction (HS-SPME) coating. A robust, well controlled thickness, and uniform coating of metal organic framework composites can be realized by the electrodeposited strategy. The incorporated UiO-66 not only enhanced the uniformity and stability of the composite coating, but also effectively decreased the stacking phenomenon of PEDOT and improved its extraction efficiency, which was over 100 times higher than that of the PEDOT coating without UiO-66. The composite coating was used to enrich seven types of volatile organic compounds (VOCs) in ion-exchange resins, including methyl cyclohexane, benzene, toluene, ortho-xylene, styrene, para-xylene and divinyl-benzene. The results of adsorption isotherm analysis showed that π stacking effect played dominant role between the composite coating and VOCs in the extraction process. The composite coating was characterized by scanning electron microscopy, X-ray diffraction, Fourier transform infrared and thermogravimetric analysis, respectively. A determination method for seven kinds of VOCs was established by HS-SPME coupled with gas chromatography-flame ionization detection (GC-FID). Under the optimal experimental conditions, the detection linear range (LRs) was 0.09-100 ng mL^-1, and the detection limit (LODs) was 0.03-0.06 ng mL^-1 (S/N = 3). The method was applied for the migration detection of VOCs in four types of ion-exchange resin, which showed satisfactory recovery (84.5-117.2%).

Evolution of a Metal-Organic Framework into a Brønsted Acid Catalyst for Glycerol Dehydration to Acrolein

Metal-organic frameworks (MOFs) as solid acid catalysts provide active sites with definite structures. Here, Zr₆ -based MOF-808 and its derivatives were studied as catalysts for glycerol dehydration, the products of which (acrolein vs. acetol) are very sensitive to the nature of the catalytic acid sites. Evolving MOF-808 into MOF-808-S with a 120 % increase in the number of Brønsted OH^- /H₂ O coordinated to Zr^IV and a vanished Lewis acidity by steam treatment, the post-synthetically modified catalyst presented 100 % conversion of glycerol, 91 % selectivity to acrolein, and 0 % selectivity to acetol within the active window. Real-time analysis of the product composition indicated the in situ MOF structural evolution. Overall, the specific MOF-substrate interaction characterized by the probe reaction provides more understandings on the structural evolution of the MOFs and their impact on the performance as solid acid catalysts.

Metal-organic framework (MOF) materials as polymerization catalysts: a review and recent advances

Synthetic polymers are ubiquitous across both the industrial and consumer segments of the world economy. Catalysts enable rapid, efficient, selective, and even stereoselective, formation of desired polymers from any of a host of candidate monomers. While numerous molecular catalysts have been shown to be effective for these reactions, separation of the catalysts from reaction products is typically difficult - a potentially problematic complication that suggests instead the use of heterogeneous catalysts. Many of the most effective heterogeneous catalysts, however, comprise supported collections of reaction centres that are decidedly nonuniform in their composition, siting, and activity. Nonuniformity complicates atomic-scale evaluation of the basis for catalytic activity and thus impedes scientific hypothesis-driven understanding and development of superior catalysts. In view of the fundamental desirability of structural and chemical uniformity at the meso, nano, and even atomic scale, crystallographically well-defined, high-porosity metal-organic frameworks (MOFs) have attracted attention as model catalysts and/or catalyst-supports for a wide variety of chemical transformations. In the realm of synthetic polymers, catalyst-functionalized MOFs have been studied for reactions ranging from coordination-mediated polymerization of ethylene to visible-light initiated radical polymerizations. Nevertheless, many polymerization reactions remain to be explored - and, no doubt, will be explored, given the remarkable structural and compositional diversity of attainable MOFs. Noteworthy emerging studies include work directed toward more sophisticated catalytic schemes such as polymer templating using MOF pore architectures and tandem copolymerizations using MOF-supported reaction centres. Finally, it is appropriate to recognize that MOFs themselves are synthetic polymers - albeit, uncoventional ones.

Metal-Organic Framework-Based Catalysts with Single Metal Sites

Metal-organic frameworks (MOFs) are a class of distinctive porous crystalline materials constructed by metal ions/clusters and organic linkers. Owing to their structural diversity, functional adjustability, and high surface area, different types of MOF-based single metal sites are well exploited, including coordinately unsaturated metal sites from metal nodes and metallolinkers, as well as active metal species immobilized to MOFs. Furthermore, controllable thermal transformation of MOFs can upgrade them to nanomaterials functionalized with active single-atom catalysts (SACs). These unique features of MOFs and their derivatives enable them to serve as a highly versatile platform for catalysis, which has actually been becoming a rapidly developing interdisciplinary research area. In this review, we overview the recent developments of catalysis at single metal sites in MOF-based materials with emphasis on their structures and applications for thermocatalysis, electrocatalysis, and photocatalysis. We also compare the results and summarize the major insights gained from the works in this review, providing the challenges and prospects in this emerging field.

Self-supported rhodium catalysts based on a microporous metal–organic framework for polymerization of phenylacetylene and its derivatives

Highly efficient, cis-selective, stable, recyclable and reusable heterogeneous single-site MOF-supported rhodium catalysts polymerize PA and its derivatives, producing cis-transoidal PPAs and their functional derivatives having a helical configuration or AIE properties.

Semiconductive Nature of Lead-Based Metal-Organic Frameworks with Three-Dimensionally Extended Sulfur Secondary Building Units

Recently, metal-organic frameworks (MOFs) composed of sulfur secondary building units (sulfur-SBUs) have attracted significant attention as unique electronic materials with high conductivities and photo- and electrocatalytic properties. Herein we report the crystal structure of KGF-1, an example of a Pb-MOF composed of three-dimensionally extended sulfur-SBUs that displays molecular sieving behavior, visible-light absorption, and a semiconductor band structure and is a hydrogen-evolution photocatalyst.

Enhanced Gas Uptake in a Microporous Metal-Organic Framework via a Sorbate Induced-Fit Mechanism

Physical adsorption of gas molecules in microporous materials is an exothermic process, with desorption entropy driving a decrease in uptake with temperature. Enhanced gas sorption with increasing temperature is rare in porous materials and is indicative of sorbate initiated structural change. Here, sorption of C₂H₆, C₃H₆, and C₃H₈ in a flexible microporous metal-organic framework (MOF) {Cu(FPBDC)]·DMF}_n (NKU-FlexMOF-1) (H₂FPBDC = 5-(5-fluoropyridin-3-yl)-1,3-benzenedicarboxylic acid) that increases with rising temperature over a practically useful temperature and pressure range is reported along with other small molecule and hydrocarbon sorption isotherms. Single X-ray diffraction studies, temperature-dependent gas sorption isotherms, in situ and variable temperature powder X-ray diffraction experiments, and electronic structure calculations were performed to characterize the conformation-dependent sorption behavior in NKU-FlexMOF-1. In total, the data supports that the atypical sorption behavior is a result of loading-dependent structural changes in the flexible framework of NKU-FlexMOF-1 induced by sorbate-specific guest-framework interactions. The sorbates cause subtle adaptations of the framework distinct to each sorbate providing an induced-fit separation mechanism to resolve chemically similar hydrocarbons through highly specific sorbate-sorbent interactions. The relevant intermolecular contacts are shown to be predominantly repulsion and dispersion interactions. NKU-FlexMOF-1 is also found to be stable in aqueous solutions including toleration of pH changes. These experiments demonstrate the potential of this flexible microporous MOF for cost and energy efficient industrial hydrocarbon separation and purification processes. The efficacy for the separation of C₃H₆/C₃H₈ mixtures is explicitly demonstrated using NKU-FlexMOF-1a (i.e., activated NKU-FlexMOF-1) for a particular useful temperature range.

pKa-Directed Incorporation of Phosphonates into MOF-808 via Ligand Exchange: Stability and Adsorption Properties for Uranium

We report a class of pK_a-directed, precise incorporation of phosphonate ligands into a zirconium-based metal-organic framework (Zr-MOF), MOF-808, via ligand exchange. By replacing of formate ligands with methylphosphonic acid (MPA), ethanephosphonic acid (EPA), and vinylphosphonic acid (VPA), whose pK_a values are slightly higher than that of the benzenetricarboxylic acid (BTC) linker in MOF-808, daughter MOFs can be synthesized without controlling the stoichiometric amounts of added MPA. The methylphosphonate MOFs (808-MPAs) demonstrate high porosities, with only small changes in the pore diameter and specific surface area when compared with the parent MOF-808. PXRD patterns and structure refinements indicate the expansion of the lattice for all MOFs after decorating with methylphosphonate ligands. The XPS spectra reveal a charge redistribution of the Zr₆ node after ligand exchange. FTIR and ³¹P MAS NMR spectra, combined with DFT calculation, suggest that the methylphosphonate ligand is connected to the Zr₆ node as CH₃P(O)(OZr)(OH) species with an accessible acidic P-OH group. Besides, 808-MPAs demonstrate excellent chemical stability in concentrated HCl, concentrated HNO₃, hot water, and 0.2 mol/L trifluoroacetic acid solutions. Impressively, 808-MPAs show ultrafast adsorption performance for uranyl ions using the ion-exchange property of P-OH sites in their cavity environment, with an equilibrium time of 10 min, much quicker than the previous adsorbents. The present study demonstrates a series of important proof-of-concept examples of the pK_a-directed Zr-MOFs with tunable phosphonate-terminated ligands, which can extend to other phosphonate-functionalized Zr-based framework platforms in the near future.

Metal-Organic Frameworks in Polymer Science: Polymerization Catalysis, Polymerization Environment, and Hybrid Materials

The development of metal-organic frameworks (MOFs) has had a significant impact on various fields of chemistry and materials science. Naturally, polymer science also exploited this novel type of material for various purposes, which is due to the defined porosity, high surface area, and catalytic activity of MOFs. The present review covers various topics of MOF/polymer research beginning with MOF-based polymerization catalysis. Furthermore, polymerization inside MOF pores as well as polymerization of MOF ligands is described, which have a significant effect on polymer structures. Finally, MOF/polymer hybrid and composite materials are highlighted, encompassing a range of material classes, like bulk materials, membranes, and dispersed materials. In the course of the review, various applications of MOF/polymer combinations are discussed (e.g., adsorption, gas separation, drug delivery, catalysis, organic electronics, and stimuli-responsive materials). Finally, past research is concluded and an outlook toward future development is provided.

Methylene-Bridged Tridentate Salicylaldiminato Binuclear Titanium Complexes as Copolymerization Catalysts for the Preparation of LLDPE through [Fe]/[Ti] Tandem Catalysis

A novel tandem catalysis system consisted of salicylaldiminato binuclear/mononuclear titanium and 2,6-bis(imino)pyridyl iron complexes was developed to catalyze ethylene in-situ copolymerization. Linear low-density polyethylene (LLDPE) with varying molecular weight and branching degree was successfully prepared with ethylene as the sole monomer feed. The polymerization conditions, including the reaction temperature, the Fi/Ti molar ratio, and the structures of bi- or mononuclear Ti complexes were found to greatly influence the catalytic performances and the properties of obtained polymers. The polymers were characterized by differential scanning calorimetry (DSC), high temperature gel permeation chromatography (GPC) and high temperature 13C NMR spectroscopy, and found to contain ethyl, butyl, as well as some longer branches. The binuclear titanium complexes demonstrated excellent catalytic activity (up to 8.95 × 106 g/molTi·h·atm) and showed a strong positive comonomer effect when combined with the bisiminopyridyl Fe complex. The branching degree can be tuned from 2.53 to 22.89/1000C by changing the reaction conditions or using different copolymerization pre-catalysts. The melting points, crystallinity and molecular weights of the products can also be modified accordingly. The binuclear complex Ti2L1 with methylthio sidearm showed higher capability for comonomer incorporation and produced polymers with higher branching degree and much higher molecular weight compared with the mononuclear analogue.

Gas reactions under intrapore condensation regime within tailored metal-organic framework catalysts

Production of 1-butene, a major monomer in polymer industry, is dominated by homogeneous protocols via ethylene dimerization. Homogeneous catalysts can achieve high selectivity but require large amounts of activators and solvents, and exhibit poor recyclability; in turn, heterogeneous systems are robust but lack selectivity. Here we show how the precise engineering of metal–organic frameworks (MOFs) holds promise for a sustainable process. The key to the (Ru)HKUST-1 MOF activity is the intrapore reactant condensation that enhances ethylene dimerization with high selectivity (> 99% 1-butene) and high stability (> 120 h) in the absence of activators and solvents. According to spectroscopy, kinetics, and modeling, the engineering of defective nodes via controlled thermal approaches rules the activity, while intrapore ethylene condensation accounts for selectivity and stability. The combination of well-defined actives sites with the concentration effect arising from condensation regimes paves the way toward the development of robust MOF catalysts for diverse gas-phase reactions.

The search for robust heterogeneous catalysts for the production of linear α-olefins is still a challenge as they do not show well-defined sites and lack the high selectivity reported for homogeneous counterparts. Here the authors show how the precise engineering of metal–organic frameworks (MOFs) holds promise for a sustainable process.

Zr-Based Metal-Organic Frameworks with Intrinsic Peroxidase-Like Activity for Ultradeep Oxidative Desulfurization: Mechanism of H2O2 Decomposition

The restriction of sulfur content in fuels has become increasingly stringent as a result of the growing environmental concerns. Although several MOF-derived materials like POM@MOF composites have shown the ability to catalyze oxidative desulfurization (ODS), their catalytic activities inevitably obstructed by the encapsulated catalytic sites like POM due to the blockage of cavities. Therefore, MOFs with intrinsic and accessible catalytic sites are highly desirable for their applications in ultradeep ODS. Herein, four representative Zr-based MOFs (Zr-MOFs), namely, UiO-66, UiO-67, NU-1000, and MOF-808, were assessed for catalytic ODS. These MOFs were confirmed that they have peroxidase-like activity and can catalyze ODS with H₂O₂ as oxidant. Among them, MOF-808 showed the highest catalytic activity and it can fully desulfurize dibenzothiophene (DBT) in a model gasoline with a S concentration of 1000 ppm under 40 °C within 5 min. An extremely low apparent Arrhenius activation energy (22.0 KJ·mol^-1) and an extraordinarily high TOF value (42.7 h^-1) were obtained, ranking MOF-808 among the best catalysts for the catalytic DBT oxidation. Further studies confirmed that the excellent catalytic activity is mainly responsible for the high concentration of the accessible Zr-OH(H₂O) catalytic sites decorated in MOF-808. The superoxide radicals (^•O₂^-) and hydroxyl radicals (^•OH) were identified and were proved to involve in the DBT oxidation. Besides, the effects of Brönsted and lewis acidity to the catalytic efficiency were also discussed. Based on the experimental results, a plausible mechanism concerning on Zr-OH(H₂O) groups promoting the H₂O₂ decomposion in to both ^•O₂^- and ^•OH was first proposed. Moreover, MOF-808 can be facilely reused for at least eight runs without significant loss of its catalytic activity. By the integration of facile synthesis, high catalytic efficiency, and good stability, MOF-808 thus represents a new benchmark catalyst for catalytic oxidative desulfurization.