Dramatic Differences in Aggregation-Induced Emission and Supramolecular Polymerizability of Tetraphenylethene-Based Stereoisomers

Robust 1D selective correlation NMR spectroscopy for rapid chemical and biological applications

Selective homonuclear proton correlation NMR spectroscopy (COSY) provides a useful detection tool for elucidating molecular structures and identifying chemical compositions in 1D spectroscopic patterns. However, conventional 1D selective COSY experiments highly rely on the performance of selective excitation on targeted signals and their applications generally suffer from spectral congestion in complex chemical and biological samples. Herein, based on the concept of targeted excitation on coupled proton pairs and spectroscopic separation on their respective COSY responses, we propose a 1D selective NMR approach that is capable of individually recording direct coupling correlation information of targeted proton groups for analyses on complex samples, free of spectral congestion. The performance of the proposed approach is demonstrated on a medicine sample, a biological molecule, and a real metabonomics sample of human serum. This approach shows a promising analytical technique for structural studies and component analyses in chemical and biological applications. Keywords: NMR spectroscopy, Correlation spectroscopy, Targeted signal excitation, Spectral congestion, Molecular structure analysis.

Aggregation-induced emission-active supramolecular polymers: from controlled preparation to applications

Supramolecular polymers are typical self-assemblies, in which repeating monomer units are bonded together with dynamic and reversible noncovalent interactions. Supramolecular polymers can combine the advantages of polymer science and supramolecular chemistry. Aggregation-induced emission (AIE) means that a molecule remains faintly emissive in the dispersed state but intensively luminescent in a highly aggregated state. AIE has brought new opportunities and further development potential to the field of polymeric chemistry. The integration of AIE luminogens with supramolecular interactions can provide new vitality for supramolecular polymers. Therefore, it is essential for scientists to understand the preparation and applications of AIE-active supramolecular polymers. This review focuses on the recent advanced progress in the preparation of AIE-active supramolecular polymers. In addition, we summarize the newly developed supramolecular polymers with an AIE nature and their applications in chemical sensing, and in vitro and in vivo imaging, as well as the visualization of their structure and properties. Finally, the development trends and challenges of AIE-active supramolecular polymers are prospected.

Construction of Supramolecular Polymers and Covalent Polymers via the Same Monomers

Nature owns the ability to construct structurally different polymers from the same monomers. While polymers can be classified as covalent polymers (CPs) and supramolecular polymers (SPs), it is still difficult to synthesize CPs and SPs using same monomers like nature do. Herein, M1 with two diazo salts on both the ends was designed. Additionally, hydroquinone was chosen to be M2 for the existence of two hydroxyl groups. When mixing at room temperature, M1 and M2 self-assembled to SPs via N…H hydrogen bonds. In another way, upon the exposure to ultraviolet irradiation when blending M1 with M2, CPs were fabricated in the presence of covalent bonds. The excellent thermal stability of CPs was determined by TGA and DSC, while the great corrosion resistance of covalent polymers was detected by acid or alkali immersion. In this way, constructing two kinds of polymers using the same monomers was successfully achieved. This shows tremendous potential in fields of polymer science, supramolecular chemistry, which would boom the development of polymers.

Characterization by Gel Permeation Chromatography of the Molecular Weight of Supramolecular Polymers Generated by Forming Polyrotaxanes through the Introduction of External Stoppers

Supramolecular polymers find wide applications across diverse domains, and the molecular weight exerts a critical influence on their applicability. Consequently, the measurement of molecular weight for supramolecular polymers assumes paramount significance. Gel Permeation Chromatography (GPC) requiring low-concentration condition is a common characterization employed for molecular weight determination, which is not suitable for supramolecular polymers possessing concentration-independence property. Here, to break this threshold, we synthesized M1 embodying dibenzo-24-crown-8 (DB24C8) moiety as well as dibenzylammonium salt (DBA) group, which was capable of self-assembling into supramolecular polymers terminated with aldehyde groups at its end. Upon the addition of (4- (1,2,2-Triphenylvinyl) phenyl) methylamine (TPE-NH2), supramolecular polymers underwent a transition into polyrotaxanes, for which it was led by the generation of imine bonds. By virtue of GPC, the molecular weight of polyrotaxanes was obtained, then it was available to gain the molecular weight of supramolecular polymers with the help of transformation efficiency.

High-Performance Supramolecular Organogel Adhesives for Antimicrobial Applications in Diverse Conditions

Supramolecular organogel coatings that can disinfect the deposited microbial pathogens are emerging as an effective vehicle to prevent pathogen transmission. However, the development of anti-pathogen supramolecular adhesives with mechanical robustness and controlled oil inclusion is technically challenging. Here, we report supramolecular adhesives with mechanical integrity and robust interfacial adhesion over a wide range of biogenic antimicrobial oil. Bifunctional monomers are synthesized and assembled into linear polymers with semicrystalline stackings through hierarchical hydrogen bonds, where incorporated bioactive oil could regulate the semicrystalline stackings into nanosized crystalline domains through intermolecular hydrogen bonds. The abundant bonding motifs provided by the supramolecular cross-linked networks could accommodate oil molecules with high inclusion capability and provide more interfacial binding sites with high adhesion strength, and the nanosized crystalline domains could stabilize the organogel network and compensate for the interactions with oil molecules to enhance structural and mechanical stability. In addition, rapid healing, robust adhesion, and antimicrobial and antiviral properties of the resultant organogel coatings are demonstrated. This study paves the way for the development of high-performance antimicrobial supramolecular adhesives with controlled oil inclusion, showing potential applications in soft robotics, tissue engineering, and biomedical devices.

Helical Self-Assembly and Fe3+ Detection of V-Shaped AIE-Active Chiral Tetraphenylbutadiene-Based Polyamides

Chiral aggregation-induced emission (AIE) molecules have drawn attention for their helical self-assembly and special optical properties. The helical self-assembly of AIE-active chiral non-linear main-chain polymers can produce some desired optical features. In this work, a series of V-shaped chiral AIE-active polyamides P1-C3, P1-C6, P1-C12 and linear P2-C3, P2-C6, bearing n-propyl/hexyl/dodecyl side-chains, based on tetraphenylbutadiene (TPB), were prepared. All target main-chain polymers exhibit distinct AIE characteristics. The polymer P1-C6 with moderate length alkyl chains shows better AIE properties. The V-shaped main-chains and the chiral induction of (1R,2R)-(+)-1,2-cyclohexanediamine in each repeating unit promote the polymer chains display helical conformation, and multiple helical polymer chains induce nano-fibers helicity when the polymer chains aggregate and self-assemble in THF/H2 O mixtures. Simultaneously, the helical conformation polymer chains and helical nano-fibers cause P1-C6 produce strong circular dichroism (CD) signals with positive Cotton effect. Moreover, P1-C6 could also occur fluorescence quenching response to Fe3+ selectively with a low detection limit of 3.48 μmol/L.

Small Molecules Mediated the Chirality Transfer in Self-Assembled Nanocomposites with Strong Circularly Polarized Luminescence

Manipulation of the chirality at all scales has a cross-disciplinary importance and may address key challenges at the heart of physical sciences. One critical question in this field is how the chirality of one entity can be transferred to the asymmetry of another entity. Here, we find that small molecules play a crucial role in the chirality transfer from chiral organic molecules to CdSe/CdS nanorods, where the handedness of the nanorod assemblies either agrees or disagrees with that of the molecular assemblies, leading to the positive or inverse chirality transfer. The assembling mode of nanorods on the molecular assemblies, where the nanorods are either lying or standing, is closely associated with the handedness of the nanorod assemblies, resulting in opposite chirality. Furthermore, we have found that circularly polarized emission from chiral assemblies of nanorods is dependent on molecular additives. The promoted luminescence dissymmetry factor (glum) of the nanocomposites with a high value of ∼0.3 could be attained under optimal conditions.

Elucidation of the key role of isomerization in the self-assembly and luminescence properties of AIEgens

Due to the hierarchical nature of the self-assembly process, it is effective to control assembled nanostructures by tuning the spatial configurations of the building blocks through Z-/E-isomerization. A pair of AIE stereoisomers termed (Z)-/(E)-TPE-UPy was reported with different self-assembly mechanisms, morphologies and luminescence properties. In this study, we present a multiscale modeling combining MD simulations, hybrid QM/MM calculations and the PCM model, to systematically clarify the molecular configuration-molecular assembly-photophysical property relationship of (Z)-/(E)-TPE-UPy. Our study shows that (Z)-TPE-UPy follows a concentration-dependent ring-chain polymerization mechanism. At low concentration, (Z)-TPE-UPy tends to form ring-like (Z)-close-dimers with all H-bond sites occupied, while at high concentration, the H-bond backbone in the chain-like structures is more planar and stronger, making the zig-zag chain-like conformations more favorable. For the (E)-isomer, the H-bond backbone is quite planar and rigid, which makes it linearly elongate one-by-one at the whole range of concentrations via the isodesmic polymerization mechanism. (Z)-TPE-UPy oligomers exhibit large flexibility and diverse conformations, leading to sharply enhanced viscosity at high concentration in experiments. Moreover, the fluorescence spectrum of (Z)-/(E)-TPE-UPy aggregate is conformation-dependent and the enhanced emission in the aggregated state is attributed to the restriction of the low-frequency intramolecular rotations of the phenyl rings and the distortion of the CC plane, as well as the reduction of electron-vibration couplings. Our work not only offers valuable insights into the key role of stereoisomerism in assembled morphologies and luminescence properties, but also provides a theoretical basis for the rational design of new building blocks based on stereoisomers.

Efficient detection of L-aspartic acid and L-glutamic acid by self-assembled fluorescent microparticles with AIE and FRET activities

Amino acids play an important role in the formation of proteins, enzymes, hormones and peptides in animals. Moreover, aspartic acid and glutamic acid have a critical impact on the central nervous system as excitatory neurotransmitters. Here, we report the highly selective detection of L-glutamic acid (L-Glu) and L-aspartic acid (L-Asp) using fluorescent microparticles constructed by the combination of aggregation-induced emission and self-assembly-induced Förster resonance energy transfer.

Carbazole fluorophore with an imidazole/thiazole unit: contrasting stimuli-induced fluorescence switching, water-sensing and deep-blue emission

Carbazole-based, π-conjugated donor-acceptor fluorophores were synthesized by integrating imidazole/thiazole units. Then, we investigated the impact of subtle structural changes on fluorescence properties. Carbazole integrated with imidazole (Cz-I) and carbazole integrated with thiazole (Cz-T) showed strong fluorescence in solution (quantum yield (Φ _f) = 0.18 (Cz-I) and 0.14 (Cz-T) compared with the standard quinine sulfate) and solid-state (Φ _f = 8.0% (Cz-I) and 14.6% (Cz-T)). Cz-I showed relatively more blue-shifted emission in solution compared with the solid-state (λ _max = 417 nm (CH₃CN) and 460 nm (solid)). Cz-T exhibited deep-blue emission in the solid-state compared with solution (λ _max = 455 nm (CH₃CN) and 418 nm (solid)). Interestingly, Cz-T exhibited a drastic change in fluorescence in organic solvents (CH₃CN, THF, CH₃OH, DMSO) with a low percentage (1%) of water. Cz-I showed reversible fluorescence switching between two fluorescence states upon exposure to trifluoracetic acid (TFA)/ammonia (NH₃). In contrast, Cz-T displayed reversible/self-reversible off-on fluorescence switching upon exposure to TFA or NH₃. Mechanofluorochromic studies of Cz-I showed a slight reduction in fluorescence intensity upon crushing and reversal to the initial state upon heating. Cz-T exhibited off-on reversible/self-reversible fluorescence switching upon crushing/heating. Computational studies indicated that thiazole integration improved the electron-withdrawing characteristics compared with imidazole and contributed to contrasting fluorescence responses. Thus, a simple change of nitrogen with sulfur produced contrasting self-assembly in the solid-state that led to different functional properties and stimuli-induced fluorescence switching.

Modulus watch: In situ determination of the gel modulus by timing the fluorescence color change

The gel modulus, a key parameter for gel materials, is traditionally determined by cumbersome rheometer. Recently, probe technologies occur to meet the requirements of in situ determination. Till now, in situ and quantitatively testing of gel materials with unabridged structure informations still remains a challenge. Here, we provide a facile, in situ approach to determine the gel modulus, by timing the aggregation of a doped fluorescence probe. The probe shows green emission during aggregation and shifts to blue once it forms aggregates. The higher modulus of the gel, the longer probe's aggregation time. Furthermore, a quantitative correlation of gel modulus with the aggregation time is established. The in situ method not only facilitates the scientific researches in the field of gels, but also provides a new approach for spatiotemporal materials.

Tuning the Solid Phase Fluorescence Emission from Long Wavelength Visible to Near-Infrared in Oxazol-5-One Derivatives: Structure-Property Relationship, Theoretical and Experimental Studies

Most of the fluorescent molecules among organic [Formula: see text]-conjugated materials show blue or green emission in the solid phase but few of them emit red-shifted visible and near-infrared light in the material science. To create molecules emitting for this feature, two π-conjugated oxazol-5-one derivatives containing donor (OCH₃) and acceptor groups (NO₂) were synthesized. Their optical and charge-transport properties were investigated through experimental and theoretical methods including the single crystal X-ray crystallography, Hirshfeld Surface Analysis, photophysical studies and Density Functional Theory (DFT), respectively. In addition, FT-IR, ¹H-NMR, ¹³C-NMR spectroscopy, cyclic voltammetry (CV) measurements were performed. According to our results, both molecules may provide the significant pathway of development of long wavelength visible and red emissive features in solid phase with the aggregation induced enhanced emission (AIEE) properties particularly in the fields of OLEDs, optical communication, defence and bioimaging.

Conjugation Extension and Halochromic Behaviors of S-Fused Polycyclic Aromatic Hydrocarbons Bearing Cyclopenta[b]thiopyran Moieties

Three S-fused polycyclic aromatic hydrocarbons (PAHs) bearing cyclopenta[b]thiopyran moieties have been designed and successfully synthesized. With the conjugation extension, the absorption onset of the longest PAH reaches 1110 nm. All the three S-fused PAHs exhibit significant halochromic properties in both solution and solid states. Upon protonation, the proton is incorporated on the cyclopentadiene ring while the positive charge is localized on the thiopyrylium ring. Moreover, no significant difference can be found for the two shorter PAHs upon the protonation by different organic acids, such as trifluoroacetic acid (TFA) and trifluoromethanesulfonic acid (TfOH), while the longest PAH can be only mono-protonated by TFA but di-protonated by stronger TfOH. Furthermore, after protonation, the non-emissive S-fused PAHs exhibit strong fluorescence and can be regenerated by simply neutralization with triethylamine. The enhanced emission of mono-protonated products stem from S₂ →S₀ transitions, which disobey the Kasha's rule.

Insights into Self-Assembly of Nonplanar Molecules with Aggregation-Induced Emission Characteristics

Utilizing nonplanar conjugated molecules as building blocks facilitates the development of self-assembly but is fundamentally challenging. To study the self-assembly behavior, we herein demonstrate the self-assembly process of a nonplanar conjugated molecule with aggregation-induced emission (AIE) feature from an isolated molecule to an irregular cluster to a well-defined vesicle driven by amphiphiles. The superhigh aggregation-sensitive emission affords more precise and detailed information about the self-assembly process than traditional dyes. Meanwhile, the arrangements of the AIE-active molecule change from disordered to well-organized forms by reducing the twisted configuration during the transformation process, and the strong hydrophobicity of amphiphiles is crucial for such configuration and morphology transformations. Owing to the thermophilic bacteria-mimetic membranes, the obtained vesicles exhibit a property of superhigh thermal stability. They also display promising light-harvesting applications. This work not only deciphers the self-assembly of AIE molecules but also provides a strategy for nonplanar molecules to build well-organized self-assemblies.

Four-Winged Propeller-Shaped Indole-Modified and Indole-Substituted Tetraphenylethylenes: Greenish-Blue Emitters with Aggregation-Induced Emission Features for Conventional Organic Light-Emitting Diodes

Aggregation-induced emission (AIE) is an extraordinary photochemical phenomenon described by Tang's group in 2001, where the aggregation of some organic molecules enhances their light emission by limiting intramolecular activity in the aggregate state. This phenomenon offers new opportunities for researchers due to its potential applications in optoelectronics, energy, and biophysics. Tetraphenylethylenes (TPEs) are reliable AIE luminogens with a wide range of successful applications in material chemistry. To expand the library of AIE-active TPEs, both a series of TPE analogues, in which the phenyl rotor has been replaced by the indole ring, and indole-substituted TPE derivatives were designed and synthesized through vinyl-aryl and aryl-aryl bond formations using the Suzuki coupling reaction. Efficient synthetic routes that delivered indole-modified and indole-substituted TPEs have been developed, and almost all heterocyclic TPE analogues have demonstrated AIE behavior. Furthermore, to test whether the indole ring can be diversified, two title compounds were converted to a series of bis(indolyl)methane (BIM), and these BIM-TPE materials showed typical AIE properties. Interestingly, two compounds indicated a solvent vapor fuming reversible switch between bright blue emission and greenish-yellow emission. Upon fuming with dichloromethane, their fluorescence spectra showed 8 and 32 nm red-shift and could return to the original state after fuming with hexane. Furthermore, we have explored the effects of replacing the phenyl ring in TPE with indole together with the substitution of TPE with indole ring(s) on the performance of organic light-emitting diode (OLED) device applications. In addition, density functional theory calculations; the optical, electrochemical, light emission, electroluminescence characteristics; and admittance spectroscopic analysis of OLED devices of four representative TPEs have been investigated in detail. As a result, the indole-TPEs are potential blue emitters with AIE features for conventional OLEDs, which is a significant color in displays and lighting.

Stereoisomeric engineering of aggregation-induced emission photosensitizers towards fungal killing

Fungal infection poses and increased risk to human health. Photodynamic therapy (PDT) as an alternative antifungal approach garners much interest due to its minimal side effects and negligible antifungal drug resistance. Herein, we develop stereoisomeric photosensitizers ((Z)- and (E)-TPE-EPy) by harnessing different spatial configurations of one molecule. They possess aggregation-induced emission characteristics and ROS, viz. ¹O₂ and O₂^-• generation capabilities that enable image-guided PDT. Also, the cationization of the photosensitizers realizes the targeting of fungal mitochondria for antifungal PDT killing. Particularly, stereoisomeric engineering assisted by supramolecular assembly leads to enhanced fluorescence intensity and ROS generation efficiency of the stereoisomers due to the excited state energy flow from nonradiative decay to the fluorescence pathway and intersystem (ISC) process. As a result, the supramolecular assemblies based on (Z)- and (E)-TPE-EPy show dramatically lowered dark toxicity without sacrificing their significant phototoxicity in the photodynamic antifungal experiments. This study is a demonstration of stereoisomeric engineering of aggregation-induced emission photosensitizers based on (Z)- and (E)-configurations.

AIEgen-Enabled Multicolor Visualization for the Formation of Supramolecular Polymer Networks

Extensive reports on the use of supramolecular polymer networks (SPNs) in self-healing materials, controlled release system and degradable products have led more researchers to tap their potential owing to the unique properties. Yet, the attendant efforts in the visualization through conventional luminescence methods during the formation of SPNs have been met with limited success. Herein, we designed a special type of SPNs prepared by PPMU polymer chains containing pyrene benzohydrazonate (PBHZ) molecules as AIEgens for the multicolor visualization with naked eyes. The complete detection of the formation process of the networks relied on the PBHZ molecules with aggregation-induced ratiometric emission (AIRE) effect, which enabled the fluorescence of the polymer networks transits from blue to cyan, and then to green with the increasing crosslinking degree derived from the hydrogen bonds between 2-ureido-4-pyrimidone (UPy) units of the polymer chains. Additionally, we certificated the stimuli-responsiveness of the obtained SPNs, and the fluorescence change, as well as observing the morphology transition. The AIEgen-enabled multicolor visualization of the formation of SPNs may provide better understanding of the details of the crosslinking interactions in the microstructural evolution, giving more inspiration for the multifunctional products based on SPNs.

Understanding of supramolecular solution polymerization and interfacial polymerization via forming multiple hydrogen bonds: a computer simulation study

By employing dissipative particle dynamics (DPD) simulations combined with stochastic polymerization models, we have conducted a detailed simulation study of supramolecular solution polymerization as well as interfacial polymerization employing a coarse-grained model which is closer to the real monomer structure. By adding bending angle potentials to coarse-grained models representing supramolecular reactive monomers, we achieved monomer model simulations for different kinds of multiple hydrogen bonds. Our simulation results indicated that for the interfacial polymerization system, the volume of the monomer caused a strong steric hindrance effect, which in turn led to a low average degree of polymerization of the product. Therefore, by appropriately reducing the volume of the reaction monomer (corresponding to different confinement ascribed to the multiple hydrogen bonds), the average polymerization degree, the degree of reaction and the polymerization rate of the monomer can be effectively improved. For the solution polymerization system and the interfacial polymerization system, a certain proportion of rigid monomers and flexible monomers (60% rigid monomers and 40% flexible monomers) are mixed. High molecular weight products can thus be obtained via the polymerization reaction. The simulation strategy proposed in this study can not only provide theoretical guidance for better design of new supramolecular systems, but also provide ideas for the further synthesis of higher molecular weight supramolecular polymers.

A Strategy Based on Aggregation-Induced Ratiometric Emission to Differentiate Molecular Weight of Supramolecular Polymers

Molecular weight has an important bearing on the properties of supramolecular polymers. However, the intuitive differentiation of the molecular weight of supramolecular polymers remains challenging. Given this situation, establishing a reliable relationship between fluorescence properties and molecular weight may be a promising strategy. Herein, we prepared a supramolecular monomer M1 with aggregation-induced ratiometric emission characteristics. With the increasing M1 concentration (0.100-100 mM), the average degree of polymerization (DP_DOSY ) rose from 1.00 to 293. Meanwhile, the color changed from dark blue to cyan, finally to yellow-green in the same concentration range. Hence, the intuitive relationship between DP_DOSY and fluorescence colors was constructed, allowing the visual differentiation of molecular weight. Moreover, the fluorescence color could be regulated by introducing a competitive molecule to induce the depolymerization of supramolecular polymers.

Metal-ligand Interactions and Oligo(p-Phenylene Vinylene) Derivatives Based Supramolecular Polymer Possessing Variable Fluorescence Colors

Fluorescent supramolecular polymers combine the benefits of supramolecular polymers in terms of dynamic nature with the optoelectronic features of incorporated fluorophores. However, the majority of fluorescent supramolecular polymers can only exhibit a single fluorescent state, restricting their applications. Incorporating J-type dyes into supramolecular monomers is expected to impart supramolecular polymers with variable fluorescence colors, because the aggregation mode of J-type dyes is closely related to the formation of supramolecular polymers. Herein, we report a supramolecular polymer [M1·Zn(OTf)₂ ]_n , in which the monomer M1 contains a J-type dye, oligo(p-phenylene vinylene) (OPV) derivative, and two terpyridine ends. The M1 + Zn(OTf)₂ solutions exhibit fluorescence color changes varying from cyan to yellow-green in the monomer concentration ranging from 0.04 to 1.00 mM. Moreover, based on the outputs from laser scanning confocal microscopy (LSCM), the fluorescence color transition during the formation of supramolecular polymers is intuitively proven. Additionally, considering the close relationship between the supramolecular polymer structure and the fluorescence color, the fluorescence color can be regulated by introducing tetraethylammonium hydroxide (TBAOH) that can bind with Zn²⁺ competitively to break up the structure of the supramolecular polymer. This article is protected by copyright. All rights reserved.

Oxidative evolution of Z/E-diaminotetraphenylethylene

We report that Z/E-diaminotetraphenylethylene (Z/E-2NH₂-TPE) molecules suffer primarily from oxidative evolution rather than recognized isomerization. The oxide is separated and its structure is deciphered by single crystal X-ray diffraction. The oxidative evolution accompanying the rearrangement is explained through quantum theoretical calculation.

Structural Transformation of Copper Coordination Complexes with Inducing Supramolecular Chirality

Four copper coordination complexes [CuL(CH3OH)]n (1), [CuL(C2H5OH)]n (2), [(CuL)·0.5H2O]n (3), and [CuL(H2O)·0.5H2O]n (4) with a tridentated Schiff base ligand (H2L = (E)-2-((4-fluoro-2-hydroxybenzylidene)amino)acetate) were obtained in different solvents and reaction times....

Trans/cis-stereoisomers of triterpenoid-substituted tetraphenylethene: aggregation-induced emission, aggregate morphology, and mechano-chromism

Trans/cis stereoisomers with multiple functionalities play an important role in chemistry and materials science. In this work, two pure stereoisomers (trans- and cis-TPE-2GA) of the tetraphenylethene (TPE) derivatives bi-substituted by a bio-resourced rigid triterpenoid and glycyrrhetinic acid (GA) were synthesized and characterized by 1D and 2D NMR, single crystal analysis, and HR-MS. Both trans- and cis-TPE-2GA are thermally stable even on heating at 160 °C for 30 min, whereas they can undergo trans-to-cis and cis-to-trans photoisomerization under similar UV illumination. The introduction of triterpenoid units endowed isomers with different aggregation-induced emission (AIE) and self-assembly properties and distinct crystallinity. Trans- and cis-TPE-2GA exhibit different evolution of the fluorescent intensity in water/acetone mixture with the increase in the water fraction, which are closely related to the different evolution of the aggregate morphology, from nanorods to nanospheres for trans-TPE-2GA, while from twisted ribbons, to nanotubes and nanospheres for cis-TPE-2GA. In the solid state, the mechano-chromic properties are shown by cis-TPE-2GA, while no mechano-chromic effect is observed for trans-TPE-2GA under the same grinding conditions because of their distinct crystallinity. Finally, theoretical calculation and photophysical study demonstrate that despite both isomers being assigned to the charge transfer state emission, cis-TPE-2GA has a slightly lower energy gap, a higher quantum yield, and a longer lifetime in comparison with trans-TPE-2GA, which explained their difference in the fluorescence and mechano-chromic properties. This work may improve the understanding of the TPE-based trans and cis stereoisomers, which will be beneficial in the design of novel TPE-based functional materials.

Photoinduced E to Z isomerization of tetraphenylethylene derivatives within organometallic supramolecular assemblies

Isolation of E-1,2-bis(4-bromophenyl)-1,2-diphenyl-ethylene from the E/Z isomer mixture obtained by a McMurry coupling reaction and reaction of this isomer with imidazole followed by N-alkylation with nBuBr and anion exchange yielded the bisimidazolium tetraphenylethylene (TPE) derivative H2-E-1(PF6)2. The reaction of H2-E-1(PF6)2 with Ag2O yielded the di-nuclear metallarectangle [Ag2(E-1)2](PF6)2 where the two bis-NHC donors E-1 bridge two silver atoms. Irradiation of [Ag2(E-1)2](PF6)2 leads to E/Z isomerization of the di-NHC ligand and formation of Z-1 in the mononuclear complex [Ag(Z-1)]PF6. Demetallation of the di-NHC ligand with NH4Cl/NH4PF6 yielded bisimidazolium salt H2-Z-1(PF6)2. The unique isomerization of the E-TPE derivative into its Z-isomer via metal complex formation/irradiation/demetallation cannot be achieved by irradiation of the individual imidazolium salt. The emissive properties of the TPE complexes [Ag2(E-1)2](PF6)2 and [Ag(Z-1)]PF6 have been investigated.

Aggregation-Induced Emission-Active Gels: Fabrications, Functions, and Applications

Chromophores that exhibit aggregation-induced emission (i.e., aggregation-induced emission luminogens [AIEgens]) emit intense fluorescence in their aggregated states, but show negligible emission as discrete molecular species in solution due to the changes in restriction and freedom of intramolecular motions. As solvent-swollen quasi-solids with both a compact phase and a free space, gels enable manipulation of intramolecular motions. Thus, AIE-active gels have attracted significant interest owing to their various distinctive properties and promising application potential. Herein, a comprehensive overview of AIE-active gels is provided. The fabrication strategies employed are detailed, and the applications of AIEgens are summarized. In addition, the gel functions arising from the AIE moieties are revealed, along with their structure-property relationships. Furthermore, the applications of AIE-active gels in diverse areas are illustrated. Finally, ongoing challenges and potential means to address them are discussed, along with future perspectives on AIE-active gels, with the overall aim of inspiring research on novel materials and ideas.

Aggregation induced emission of chalcones

There is always a need for efficient luminescent materials with simple synthesis and possible ease of hydrogen atom or functional group manipulation for use in different optoelectronic and biological applications. However, for certain real-world uses aggregation caused quenching effect of luminophores in their solid/aggregate state is undesirable, and is a cause of concern in areas, wherein the solid-state optical performance is more crucial. In this regard, chalcones have been explored for their ability to display aggregation-induced emission (AIE) or aggregation-induced enhanced emission (AIEE), which can be of practical use. This article is thus focused on an integrated evidence-based report on the AIE/AIEE-active chalcone systems for potential technological and biological applications.

Graphic abstract

Modulation of Aggregation-Induced Emission by Excitation Energy Transfer: Design and Application

Excitation energy transfer (EET) as a fundamental photophysical process is well-explored for developing functional materials with tunable photophysical properties. Compared to traditional fluorophores, aggregation-induced emission luminogens (AIEgens) exhibit unique advantages for building EET systems, especially serving as energy donors, due to their outstanding photophysical properties such as bright fluorescence in aggregation state, broad absorption and emission spectra, large Stokes shift, and high photobleaching resistance. In addition, the photophysical properties of AIEgens can be modulated by energy transfer for improved luminescence performance. Therefore, a variety of EET systems based on AIEgens have been constructed and their applications in different areas have been explored. In this review, we summarize recent progress in the design strategy of AIE-based energy transfer systems for light-harvesting, fluorescent probes and theranostic systems, with an emphasis on design strategies to achieve desirable properties. The limitations, challenges and future opportunities of AIE-EET systems are briefly outlined. Design strategies and applications (light-harvesting, fluorescent probe and theranostics) of AIEgen-based excitation energy systems are discussed in this review.

Aggregation-Induced Emission Molecule Microwire-Based Specific Organic Vapor Detector through Structural Modification

An optical organic vapor sensor array based on colorimetric or fluorescence changes quantified by spectroscopy provides an efficient method for realizing rapid identification and detection of organic vapor, but improving the sensitivity of the optical organic vapor sensor is challenging. Here, AIE/polymer (AIE, ggregation-induced emission) composites into microwires arrays are fabricated as organic vapor sensors with specific recognition and high sensitivity for different vapors using the capillary-bridge-mediated assembly method. Such organic vapor sensor successfully detects organic vapor relying on a swelling-induced fluorescence change of the AIE/polymer composites, combating the unique property of AIE molecules and vapor absorption-induced polymer swelling. A series of AIE/polymer composites into microwires arrays with four different groups on the AIE molecule and four different side chains on the polymer is fabricated to detect four different organic vapors. The mechanism for improved sensitivity of the AIE/polymer composites microwires arrays sensors is the same because of the similar polarity between the group of AIE molecules and the vapor molecules. Molecular design of the side chains of the polymer and the groups of AIE molecules based on the polarity of the targeted vapor molecule can enhance the sensitivity of the sensors to the subparts per million level.

Surfactant-Induced Interfacial Aggregation of Porphyrins for Structuring Color-Tunable Liquids

Locking nonequilibrium shapes of liquids into targeted architectures by interfacial jamming of nanoparticles is an emerging area in material science. 5,10,15,20-tetrakis(4-sulfonatophenyl) porphyrin (H₆ TPPS) shows three different aggregation states that present an absorption imaging platform to monitor the assembly and jamming of supramolecular polymer surfactants (SPSs) at the liquid/liquid interface. The interfacial interconversion of H₆ TPPS, specifically H₄ TPPS^2- dissolved in water, from J- to an H-aggregation was induced by strong electrostatic interactions with amine-terminated polystyrene dissolved in toluene at the water/toluene interface. This resulted in color-tunable liquids due to interfacial jamming of the SPSs formed between H₄ TPPS^2- and amine-terminated polystyrene. However, the formed SPSs cannot lock in nonequilibrium shapes of liquids. In addition, a self-wrinkling behavior was observed when amphiphilic triblock copolymers of PS-block-poly(2-vinylpyridine)-block-poly(ethylene oxide) were used to interact with H₄ TPPS^2- . Subsequently, the SPSs formed can lock in nonequilibrium shapes of liquids.

Light-Gated Nano-Porous Capsules from Stereoisomer-Directed Self-Assemblies

Structuring pores into stable membrane and controlling their opening is extremely useful for applications that require nanopores as channels for material exchange and transportation. In this work, nanoporous vesicles with aggregation-induced emission (AIE) properties were developed from the amphiphilic polymer PEG550-TPE-Chol, in which the hydrophobic part is composed of a tetraphenylethene (TPE) group and a cholesterol moiety and the hydrophilic block is a poly(ethylene glycol) (PEG, M_n = 550 Da). Two stereoisomers, trans-PEG550-TPE-Chol and cis-PEG550-TPE-Chol, were successfully synthesized. These thermally stable stereoisomers showed distinct self-assembly behavior in water: trans-PEG550-TPE-Chol formed classical vesicles, while cis-PEG550-TPE-Chol self-assembled into cylindrical micelles. Interestingly, trans/cis mixtures of PEG550-TPE-Chol (trans/cis = 60/40), either naturally synthesized without isomers' separation during the synthesis or intentionally mixed using trans- and cis-isomers, constructed perforated vesicles with nanopores. Moreover, under the illumination of high intensity UV light (365 nm, 15 mW/cm²), the classical vesicles of trans-PEG550-TPE-Chol were perforated by its cis counterparts generated from the trans-cis photoisomerization, while the cylindrical micelles of cis-PEG550-TPE-Chol interweaved to form meshes and nanoporous membranes due to the trans-isomers produced by cis-trans photoisomerization. All of these assemblies in water emitted bright cyan fluorescence under UV light, while their constituent molecules were not fluorescent when solubilized in organic solvent. The AIE fluorescent normal vesicles and nanoporous vesicles may find potential applications in biotechnology as light-gated delivery vehicles and capsules with nanochannels for material exchange.

Pillararene-based AIEgens: research progress and appealing applications

The pillararene-based AIEgens and AIE materials, constructed using different assembly forms, show attractive applications in various areas.

Towards photoswitchable quadruple hydrogen bonds via a reversible "photolocking" strategy for photocontrolled self-assembly

Developing new photoswitchable noncovalent interaction motifs with controllable bonding affinity is crucial for the construction of photoresponsive supramolecular systems and materials. Here we describe a unique "photolocking" strategy for realizing photoswitchable control of quadruple hydrogen-bonding interactions on the basis of modifying the ureidopyrimidinone (UPy) module with an ortho-ester substituted azobenzene unit as the "photo-lock". Upon light irradiation, the obtained Azo-UPy motif is capable of unlocking/locking the partial H-bonding sites of the UPy unit, leading to photoswitching between homo- and heteroquadruple hydrogen-bonded dimers, which has been further applied for the fabrication of novel tunable hydrogen bonded supramolecular systems. This "photolocking" strategy appears to be broadly applicable in the rational design and construction of other H-bonding motifs with sufficiently photoswitchable noncovalent interactions.

Color-Tunable and ESIPT-Inspired Solid Fluorophores Based on Benzothiazole Derivatives: Aggregation-Induced Emission, Strong Solvatochromic Effect, and White Light Emission

Organic solid materials with color-tunable emissions have been extensively applied in various fields. However, a rational design and facile synthesis of an ideal fluorophore are still challenging due to the undesirable aggregation-caused quenching effect in concentrated solution and solid form. Herein, we have developed a series of 2-(2'-hydroxyphenyl)benzothiazole (HBT)-derived color-tunable solid emitters by switching functional groups at the ortho-position of a hydroxyl group via formylation and an aldol condensation reaction. By tuning the electron-withdrawing ability and the π-conjugated framework introduced by the functional groups, fluorophores emit light covering the full-color range from blue to near-infrared regions with high quantum yields in their solid form and show a significant solvatochromic effect in polar solvents. The aggregation-induced emission (AIE) or aggregation-induced emission enhancement (AIEE) and excited-state intramolecular proton transfer (ESIPT) involving fluorescence mechanism, along with their inter/intramolecular interactions in crystals, are elucidated to depict the key factors for tunable emissions and high emitting efficiency. Furthermore, high-quality white-light-emitting materials are obtained in various solvents and polydimethylsiloxane (PDMS) films with combined fluorophores. Overall, these studies report a promising strategy for the construction of organic solid materials with color-tunable emission and shed light on methods for obtaining desirable emission efficiency.

Controllable and Diversiform Topological Morphologies of Self-Assembling Supra-Amphiphiles with Aggregation-Induced Emission Characteristics for Mimicking Light-Harvesting Antenna

Controllable construction of diversiform topological morphologies through supramolecular self-assembly on the basis of single building block is of vital importance, but still remains a big challenge. Herein, a bola-type supra-amphiphile, namely DAdDMA@2β-CD, is rationally designed and successfully prepared by typical host-guest binding β-cyclodextrin units with an aggregation-induced emission (AIE)-active scaffold DAdDMA. Self-assembling investigation reveals that several morphologies of self-assembled DAdDMA@2β-CD including leaf-like lamellar structure, nanoribbons, vesicles, nanofibers, helical nanofibers, and toroids, can be straightforwardly fabricated by simply manipulating the self-assembling solvent proportioning and/or temperature. To the best of knowledge, this presented protocol probably holds the most types of self-assembling morphology alterations using a single entity. Moreover, the developed leaf-like lamellar structure performs well in mimicking the light-harvesting antenna system by incorporating with a Förster resonance energy transfer acceptor, providing up to 94.2% of energy transfer efficiency.

Fluorescent Metallosupramolecular Elastomers for Fast and Ultrasensitive Humidity Sensing

Fluorescent supramolecular polymers that can respond to subtle external stimuli to generate luminescence signals are promising in a wide range of applications, including probes, anti-counterfeiting materials, and sensors. However, complicated preparative procedures, limited responsive speed, and relatively low sensitivity still limit their practical sensing applications. Herein, we report europium-containing metallosupramolecular (PU-Eu) elastomers for fast and ultrasensitive humidity sensing by employing hygroscopic polyurethane (PU), whose urethane groups can coordinate with europium ions (Eu³⁺), emitting a strong luminescent signal by ligand-to-metal energy transfer. The variant of the coordination bond strength triggered by external humidity imparts the PU-Eu elastomer with a fast (∼1.1 s) and ultrasensitive response to the humid condition, where the external humidity increases by ∼1% and the corresponding fluorescence intensity will drop by ∼421.98 a.u. By a dip-coating process, PU-Eu elastomers can be conveniently coated on a hydrophilic and porous cellulose acetate nanofiber membrane, and the resulting composite membrane can achieve real-time and reversible monitoring of environmental humidity and human respiration. Given the versatility of PU-Eu elastomers, this study provides a low-cost and facile route of obtaining fluorescent metallosupramolecular polymers for fast and ultrasensitive humidity sensing.

Fluorescent Supramolecular Polymers Formed by Crown Ether-Based Host-Guest Interaction

Inspired by the vast array of assemblies present in nature, supramolecular chemistry has attracted significant attention on account of its diverse supra-structures, which include micelles, vesicles, and fibers, in addition to its extensive applications in luminescent materials, sensors, bioimaging, and drug delivery over the past decades. Supramolecular polymers, which represent a combination of supramolecular chemistry and polymer science, are constructed by non-covalent interactions, such as host-guest interactions, hydrogen bonding, hydrophobic or hydrophilic interactions, metal-ligand interactions, π-π stacking, and electrostatic interactions. To date, numerous host-guest recognition systems have been reported, including crown ethers, cyclodextrins, calixarenes, cucurbituril, pillararenes, and other macrocyclic hosts. Among them, crown ethers, as the first generation of macrocyclic hosts, provide a promising and facile alternative route to supramolecular polymers. In addition, the incorporation of fluorophores into supramolecular polymers could endow them with multiple properties and functions, thereby presenting potential advantages in the context of smart materials. Thus, this review focuses on the fabrication strategies, interesting properties, and potential applications of fluorescent supramolecular polymers based on crown ethers. Typical examples are presented and discussed in terms of three different types of building blocks, namely covalently bonded low-molecular-weight compounds, polymers modified by hosts or guests, and supramolecular coordination complexes.

Aggregation-Induced Emissive and Circularly Polarized Homogeneous Sulfono-γ-AApeptide Foldamers

Through our continuous effort in developing a new class of foldamers, we have both designed and synthesized homogenous sulfono-γ-AApeptides using tetraphenylethylene (TPE) moieties attached to the backbone as luminogenic sidechains. Based on previous crystal structures, we have found that these foldamers adopted a left-handed 414-helix. Due to the constraint of the helical scaffold, the rotation of the TPE moieties were restricted, leading to fluorescent emissive properties with high quantum yields not only at the aggregate state but also in solution. Investigation of the relationship between the structure and fluorescence behavior reveals that emission was induced by the combined effect of the aggregation-induced emission (AIE) and the rotated restriction from the backbone. Furthermore, as the packing mode of the luminogens could be precisely adjusted by the helical backbone, these foldamers were found to be circularly polarizable with relatively large luminescence dissymmetry factor (g lum). Interestingly, possessing cationic amphipathic structures similar to that of host-defense peptides (HDPs), these sulfono-γ-AApeptides were able to inhibit the growth of Gram-positive bacteria methicillin-resistant S. aureus (MRSA) through membrane interactions.