Site-Selective, Copper-Mediated O-Arylation of Carbohydrate Derivatives

Asymmetric Pd/Organoboron-Catalyzed Site-Selective Carbohydrate Functionalization with Alkoxyallenes Involving Noncovalent Stereocontrol

Herein, we demonstrate the robustness of a synergistic chiral Pd/organoboron system in tackling a challenging suite of site-, regio-, enantio- and diastereoselectivity issues across a considerable palette of biologically relevant carbohydrate polyols, when prochiral alkoxyallenes were employed as electrophiles. In view of the burgeoning role of noncovalent interactions (NCIs) in stereoselective carbohydrate synthesis, our mechanistic experiments and DFT modeling of the reaction path unexpectedly revealed that NCIs such as hydrogen bonding and CH-π interactions between the resting states of the Pd-π-allyl complex and the borinate saccharide are critically involved in the stereoselectivity control. Our strategy thus illuminates the untapped potential of harnessing NCIs in the context of transition metal catalysis to tackle stereoselectivity challenges in carbohydrate functionalization.

Regioselective Deacetylation of Peracetylated Deoxy-C-glycopyranosides by Boron Trichloride (BCl3)

A general approach for regioselective deacetylation at sugar 3-OH of peracetylated 6-deoxy-C-glucopyranosides mediated by BCl3 was developed. The approach could be extended to other sugar-derived 6-deoxy-C-glycopyranosides, such as those derived from mannose, galactose, and rhamnose, with deacetylation occurring at varied sugar hydroxyl groups, and further extended to 4-deoxy-C-glucopyranosides with deacetylation occurring at sugar 3-OH. The approach would enable access to synthetically challenging carbohydrate derivatives. A possible mechanism of the regioselectivity was proposed.

Stereospecific Cu(I)-Catalyzed C-O Cross-Coupling Synthesis of Acyclic 1,2-Di- and Trisubstituted Vinylic Ethers from Alcohols and Vinylic Halides

CuI and trans-N,N'-dimethylcyclohexyldiamine catalyze the single-step C-O bond cross-coupling between 1,2-di- and trisubstituted vinylic halides with functionalized alcohols, producing acyclic vinylic ethers. This stereospecific transformation selectively gives each of the (E)- and (Z)-vinylic ether products from the corresponding vinyl halide precursors. This method is compatible with carbohydrate-derived primary and secondary alcohols and several other functional groups. The conditions are mild enough to reliably generate vinylic allylic ethers without promoting Claisen rearrangements.

Catalytic Approaches to Chemo- and Site-Selective Transformation of Carbohydrates

Carbohydrates are a fundamental unit playing pivotal roles in all the biological processes. It is thus essential to develop methods for synthesizing, functionalizing, and manipulating carbohydrates for further understanding of their functions and the creation of sugar-based functional materials. It is, however, not trivial to develop such methods, since carbohydrates are densely decorated with polar and similarly reactive hydroxy groups in a stereodefined manner. New approaches to chemo- and site-selective transformations of carbohydrates are, therefore, of great significance for revolutionizing sugar chemistry to enable easier access to sugars of interest. This review begins with a brief overview of the innate reactivity of hydroxy groups of carbohydrates. It is followed by discussions about catalytic approaches to enhance, override, or be orthogonal to the innate reactivity for the transformation of carbohydrates. This review avoids making a list of chemo- and site-selective reactions, but rather focuses on summarizing the concept behind each reported transformation. The literature references were sorted into sections based on the underlying ideas of the catalytic approaches, which we hope will help readers have a better sense of the current state of chemistry and develop innovative ideas for the field.

Mechanistic Study of the Copper(II)-Mediated Site-Selective O-Arylation of Glycosides with Arylboronic Acids

Glycosides having multiple free OH groups have been shown to undergo site-selective O-arylations in the presence of arylboronic acids and copper(II) acetate. Herein, a mechanistic analysis of these Chan-Evans-Lam-type couplings is presented based on reaction kinetics, mass spectrometric analysis of reaction mixtures, and substituent effect studies. The results establish that the formation of a substrate-derived boronic ester accelerates the rate-determining transmetalation step. Intramolecular transfer of the aryl group from the boronic ester is ruled out in favor of a pathway in which the key pre-transmetalation assembly is generated from a boronic ester, a copper complex, and a second equivalent of arylboronic acid.

A synergistic Rh(I)/organoboron-catalysed site-selective carbohydrate functionalization that involves multiple stereocontrol

Site-selective functionalization is a core synthetic strategy that has broad implications in organic synthesis. Particularly, exploiting chiral catalysis to control site selectivity in complex carbohydrate functionalizations has emerged as a leading method to unravel unprecedented routes into biologically relevant glycosides. However, robust catalytic systems available to overcome multiple facets of stereoselectivity challenges to this end still remain scarce. Here we report a synergistic chiral Rh(I)- and organoboron-catalysed protocol, which enables access into synthetically challenging but biologically relevant arylnaphthalene glycosides. Our method depicts the employment of chiral Rh(I) catalysis in site-selective carbohydrate functionalization and showcases the utility of boronic acid as a compatible co-catalyst. Crucial to the success of our method is the judicious choice of a suitable organoboron catalyst. We also determine that exquisite multiple aspects of stereocontrol, including enantio-, diastereo-, regio- and anomeric control and dynamic kinetic resolution, are concomitantly operative.

Controlling the Site Selectivity in Acylations of Amphiphilic Diols: Directing the Reaction toward the Apolar Domain in a Model Diol and the Midecamycin A1 Macrolide Antibiotic

Seeking to improve the site selectivity of acylation of amphiphilic diols, which is induced by imidazole-based nucleophilic catalysts and directs the reaction toward apolar sites, as we recently reported, we examined a new improved catalytic design and an alteration of the acylating agent. The new catalysts performed slightly better selectivity-wise in the model reaction, compared to the previous set, but notably could be prepared in a much more synthetically economic way. The change of the acylating agent from anhydride to acyl chloride, particularly in combination with the new catalysts, accelerated the reaction and increased the selectivity in favor of the apolar site. The new selectivity-inducing techniques were applied to midecamycin, a natural amphiphilic antibiotic possessing a secondary alcohol moiety in each of its two domains, polar as well as apolar. In the case of the anhydride, a basic dimethylamino group, decorating this substrate, overrides the catalyst's selectivity preference and forces selective acylation of the alcohol in the polar domain with a more than 91:1 ratio of the monoacylated products. To counteract the internal base influence, an acid additive was used or the acylating agent was changed to acyl chloride. The latter adjustment leads, in combination with our best catalyst, to the reversal of the ratio between the products to 1:11.

New chemical processes to streamline carbohydrate synthesis

Carbohydrates hold potential for the future of therapeutic development due to their important role in essential biological processes. However, it is still challenging to produce homogenous materials, especially for non-mammalian sugars that are considered rare. Recent developments in this field have focused on catalytic methods, including organometallic and organocatalytic approaches to regioselective functionalization. Many approaches to glycosylations also utilize catalysts, increasingly in combination with photoredox conditions, to achieve stereoselectivity. Additionally, there have been significant advancements in the automation of glycosylation to synthesize oligosaccharides in less time and with fewer manually conducted steps by the user.

Selective Axial-to-Equatorial Epimerization of Carbohydrates

Radical-mediated transformations have emerged as powerful methods for the synthesis of rare and unnatural branched, deoxygenated, and isomeric sugars. Here, we describe a radical-mediated axial-to-equatorial alcohol epimerization method to transform abundant glycans into rare isomers. The method delivers highly predictable and selective reaction outcomes that are complementary to other sugar isomerization methods. The synthetic utility of isomer interconversion is showcased through expedient glycan synthesis, including one-step glycodiversification. Mechanistic studies reveal that both site- and diastereoselectivities are achieved by highly selective H atom abstraction of equatorially disposed α-hydroxy C-H bonds.

Atroposelective Desymmetrization of Resorcinol-Bearing Quinazolinones via Cu-Catalyzed C-O Bond Formation

Enantioselective Cu-catalyzed C-O cross coupling reactions yielding atropisomeric resorcinol-bearing quinazolinones have been developed. Utilizing a new guanidinylated dimeric peptidic ligand, a set of products were generated in good yields with excellent stereocontrol. The transformation was readily scalable, and a range of product derivatizations were performed.

Studies of Catalyst-Controlled Regioselective Acetalization and Its Application to Single-Pot Synthesis of Differentially Protected Saccharides

This article describes studies on the regioselective acetal protection of monosaccharide-based diols using chiral phosphoric acids (CPAs) and their immobilized polymeric variants, (R)-Ad-TRIP-PS and (S)-SPINOL-PS, as the catalysts. These catalyst-controlled regioselective acetalizations were found to proceed with high regioselectivities (up to >25:1 rr) on various d-glucose-, d-galactose-, d-mannose-, and l-fucose-derived 1,2-diols and could be carried out in a regiodivergent fashion depending on the choice of chiral catalyst. The polymeric catalysts were conveniently recycled and reused multiple times for gram-scale functionalizations with catalytic loadings as low as 0.1 mol %, and their performance was often found to be superior to the performance of their monomeric variants. These regioselective CPA-catalyzed acetalizations were successfully combined with common hydroxyl group functionalizations as single-pot telescoped procedures to produce 32 regioisomerically pure differentially protected mono- and disaccharide derivatives. To further demonstrate the utility of the polymeric catalysts, the same batch of (R)-Ad-TRIP-PS catalyst was recycled and reused to accomplish single-pot gram-scale syntheses of 6 differentially protected d-glucose derivatives. The subsequent exploration of the reaction mechanism using NMR studies of deuterated and nondeuterated substrates revealed that low-temperature acetalizations happen via a syn-addition mechanism and that the reaction regioselectivity exhibits strong dependence on the temperature. The computational studies indicate a complex temperature-dependent interplay of two reaction mechanisms, one involving an anomeric phosphate intermediate and another via concerted asynchronous formation of an acetal, that results in syn-addition products. The computational models also explain the steric factors responsible for the observed C2 selectivities and are consistent with experimentally observed selectivity trends.

Concise Syntheses of Violaceoids A and C

The concise syntheses of two alkylated hydroquinone natural products, violaceoids A and C, were accomplished by a protecting-group-free method employing the commercially available 2,5-dihydroxybenzaldehyde as the starting material. The key strategy of the syntheses is the utilization of alkenylboronic acid as both the coupling and temporary protective reagents to efficiently introduce the requisite alkenyl side chain of violaceoid A. Moreover, the synthesis of violaceoid C is reported here for the first time.

Recent advances in the direct O-arylation of carbohydrates

Methods for the O-arylation of hydroxyl and hemiacetal groups in carbohydrates via C(sp2)-O bond formation are discussed. Such methods provide an alternative disconnection to the traditional approach of nucleophilic substitution between a sugar-derived electrophile and a phenol or phenoxide nucleophile. They have led to new opportunities for stereoselectivity, site-selectivity and chemoselectivity in the preparation of O-aryl glycosides and carbohydrate-derived aryl ethers, compounds that are useful for a broad range of applications in medicinal chemistry, glycobiology and organic synthesis.

Site-switchable mono-O-allylation of polyols

Site-selective modification of complex molecules allows for rapid accesses to their analogues and derivatives, and, therefore, offers highly valuable opportunities to probe their functions. However, to selectively manipulate one out of many repeatedly occurring functional groups within a substrate represents a grand challenge in chemistry. Yet more demanding is to develop methods in which alterations to the reaction conditions lead to switching of the specific site of reaction. We report herein the development of a Pd/Lewis acid co-catalytic system that achieves not only site-selective, but site-switchable mono-O-allylation of polyols with readily available reagents and catalysts. Through exchanging the Lewis acid additives that recognize specific hydroxyls in a polyol substrate, our system managed to install a versatile allyl group to the target in a site-switchable manner. Our design demonstrates remarkable scope, and is amenable to the direct derivatization of various complex, bioactive natural products.

Selective manipulation of one functional group, out of many repeatedly occurring in a substrate, represents a grand challenge in chemistry. Here, the authors report a Pd/Lewis acid cocatalytic system that achieves not only site-selective, but also site-switchable mono-O-allylation of polyols.

Cu(I)/sucrose-catalyzed hydroxylation of arenes in water: the dual role of sucrose

A protocol for the hydroxylation of aryl halides catalyzed by copper(i) and sucrose in neat water has been developed. The dual role of sucrose, the reaction pathway, and the high selectivity for hydroxylation were investigated using a combination of experimental and theoretical techniques.

Synthesis of aryl ethers of carbohydrates via reaction with arynes: selective O-arylation of trans-vicinal dihydroxyl groups in carbohydrates

A new method for the O-arylation of carbohydrates under metal-free conditions using arynes as an aryl source has been developed. This approach works well with mono, di and trihydroxy compounds. Preferential O-arylation takes place at primary over secondary and equatorial over axial. Site-selective O-arylation was achieved with the substrate having trans vicinal diequatorial hydroxyls.

Total syntheses of seminolipid and its analogues by using 2,6-bis(trifluoromethyl)phenylboronic acid as protective reagent

A concise total synthesis of seminolipid, a sulfoglycolipid, has been achieved; key features include regioselective, tin-free sulfation of allyl β-d-galactopyranoside using 2,6-bis(trifluoromethyl)phenylboronic acid as protective reagent, stereoselective epoxidation, and site-selective acylation. The utility of this divergent synthetic approach to introduce 2,2,2-trichloroethyl-protected sulfate group at an early stage without toxic and environmentally unfavorable tin reagents was demonstrated by the syntheses of three seminolipid analogues with different side-chains from the common intermediate.

Copper-Catalyzed Anomeric O-Arylation of Carbohydrate Derivatives at Room Temperature

Direct and practical anomeric O-arylation of sugar lactols with substituted arylboronic acids has been established. Using copper catalysis at room temperature under an air atmosphere, the protocol proved to be general, and a variety of aryl O-glycosides have been prepared in good to excellent yields. Furthermore, this approach was extended successfully to unprotected carbohydrates, including α-mannose, and it was demonstrated here how the interaction between carbohydrates and boronic acids can be combined with copper catalysis to achieve selective anomeric O-arylation.

Copper-mediated anomeric O-arylation with organoboron reagents

Copper-mediated couplings of arylboroxines with glycosyl hemiacetals furnish O-aryl glycosides via Csp2-O bond formation. The method enables the anomeric O-arylation of protected pyranose and furanose derivatives, and is tolerant of functionalized arylboroxine partners. Whereas mixtures of anomers are formed from glucopyranose, galactopyranose and arabinofuranose hemiacetals, the α-anomer is generated selectively from mannopyranose and mannofuranose-derived substrates.

Oxalic Diamides and tert-Butoxide: Two Types of Ligands Enabling Practical Access to Alkyl Aryl Ethers via Cu-Catalyzed Coupling Reaction

A robust and practical protocol for preparing alkyl aryl ethers has been developed, which relies on using two types of ligands to promote Cu-catalyzed alkoxylation of (hetero)aryl halides. The reaction scope is very general for a variety of coupling partners, particularly for challenging secondary alcohols and (hetero)aryl chlorides. In case of coupling with aryl chlorides and bromides, two oxalic diamides serve as the powerful ligands. The tert-butoxide is first demonstrated as a ligand for Cu-catalyzed coupling reaction, leading to alkoxylation of aryl iodides complete at room temperature. Additionally, a number of carbohydrate derivatives are applicable for this coupling reaction, affording the corresponding carbohydrate-aryl ethers in 29-98% yields.

Copper-Promoted Functionalization of Organic Molecules: from Biologically Relevant Cu/O2 Model Systems to Organometallic Transformations

Copper is one of the most abundant and less toxic transition metals. Nature takes advantage of the bioavailability and rich redox chemistry of Cu to carry out oxygenase and oxidase organic transformations using O₂ (or H₂O₂) as oxidant. Inspired by the reactivity of these Cu-dependent metalloenzymes, chemists have developed synthetic protocols to functionalize organic molecules under enviormentally benign conditions. Copper also promotes other transformations usually catalyzed by 4d and 5d transition metals (Pd, Pt, Rh, etc.) such as nitrene insertions or C-C and C-heteroatom coupling reactions. In this review, we summarized the most relevant research in which copper promotes or catalyzes the functionalization of organic molecules, including biological catalysis, bioinspired model systems, and organometallic reactivity. The reaction mechanisms by which these processes take place are discussed in detail.

Regioselective Manipulation of GlcNAc Provides Allosamine, Lividosamine, and Related Compounds

Palladium-catalyzed oxidation of isopropyl N-acetyl-α-d-glucosamine (GlcNAc) is used to prepare the rare sugars allosamine, lividosamine, and related compounds with unprecedented selectivity. The Passerini reaction applied on 3-keto-GlcNAc provides an entry into branching of the carbon skeleton in this compound.

Recent advances in site-selective functionalization of carbohydrates mediated by organocatalysts

As one of the four fundamental building blocks of life, carbohydrates assume varied and expansive roles in biological contexts. More in-depth understanding of carbohydrates and their interactions, however, is often restricted by our inability to synthesize and subsequently functionalize them in a site-selective manner. This review will summarize recent advances in the site-selective functionalization of carbohydrates using organocatalysts, including achiral catalysts, chiral nucleophilic bases, chiral N-heterocyclic carbenes, and chiral phosphoric acids, with an emphasis on the catalytic nature in each case. As in many endeavors, taking an alternative approach can often lead to success, and selected examples of these achievements will be highlighted as well.

2,6-Bis(trifluoromethyl)phenylboronic Esters as Protective Groups for Diols: A Protection/Deprotection Protocol for Use under Mild Conditions

The application of 2,6-bis(trifluoromethyl)phenyl boronic acid ( o-FXylB(OH)₂; o-FXyl = 2,6-(CF₃)₂C₆H₃) as a recoverable and reusable protective agent for diols is described. The resulting cyclic boronic esters are water- and air-stable and tolerant to various organic transformations. Moreover, they can be deprotected under mild conditions. This methodology was applied to the synthesis of a highly conjugated enetriyne natural product with anti-angiogenic activities.

Synthetic applications and methodology development of Chan-Lam coupling: a review

Chan-Lam coupling is one of the most popular and easy methods to perform arylation of amines (N-arylations). This cross-coupling is generally performed by reacting aryl boronate derivatives with a variety of substrates involving nitrogen containing functional groups such as amines, amides, ureas, hydrazine, carbamates. This article summarizes the synthetic applications of this reaction and the efforts of scientists to develop novel and efficient methodologies for this reaction.