Zinc and Magnesium Catalysts for the Hydrosilylation of Carbon Dioxide

Skeletal Formation of Carbocycles with CO2: Selective Synthesis of Indolo[3,2-b]carbazoles or Cyclophanes from Indoles, CO2, and Phenylsilane

The catalytic reactions of indoles with CO2 and phenylsilane afforded indolo[3,2-b]carbazoles, where the fused benzene ring was constructed by forming two C-H bonds and four C-C bonds with two CO2 molecules via deoxygenative conversions. Nine-membered cyclophanes made up of three indoles and three CO2 molecules were also obtained, where the cyclophane framework was constructed by forming six C-H bonds and six C-C bonds. These multicomponent cascade reactions giving completely different carbocycles were switched simply by choosing the solvent, acetonitrile or ethyl acetate.

Low oxidation state and hydrido group 2 complexes: synthesis and applications in the activation of gaseous substrates

Numerous industrial processes utilise gaseous chemical feedstocks to produce useful chemical products. Atmospheric and other small molecule gases, including anthropogenic waste products (e.g. carbon dioxide), can be viewed as sustainable building blocks to access value-added chemical commodities and materials. While transition metal complexes have been well documented in the reduction and transformation of these substrates, molecular complexes of the terrestrially abundant alkaline earth metals have also demonstrated promise with remarkable reactivity reported towards an array of industrially relevant gases over the past two decades. This review covers low oxidation state and hydrido group 2 complexes and their role in the reduction and transformation of a selection of important gaseous substrates towards value-added chemical products.

Hydrosilylation of nitriles and tertiary amides using a zinc precursor

We report a competent and selective hydrosilylation of nitriles and tertiary amides catalyzed by the readily available zinc bis(hexamethyldisilazide) under solvent-free and mild conditions, making it a sustainable and desirable alternative to existing methods. Both protocols afforded high conversion, superior selectivity, and a broad substrate scope, from electron-withdrawing to electron-donating and heterocyclic substitutions.

Conjugated Microporous Polymers for Catalytic CO2 Conversion

Rising carbon dioxide (CO2) levels in the atmosphere are recognized as a threat to atmospheric stability and life. Although this greenhouse gas is being produced on a large scale, there are solutions to reduction and indeed utilization of the gas. Many of these solutions involve costly or unstable technologies, such as air-sensitive metal-organic frameworks (MOFs) for CO2 capture or "non-green" systems such as amine scrubbing. Conjugated microporous polymers (CMPs) represent a simpler, cheaper, and greener solution to CO2 capture and utilization. They are often easy to synthesize at scale (a one pot reaction in many cases), chemically and thermally stable (especially in comparison with their MOF and covalent organic framework (COF) counterparts, owing to their amorphous nature), and, as a result, cheap to manufacture. Furthermore, their large surface areas, tunable porous frameworks and chemical structures mean they are reported as highly efficient CO2 capture motifs. In addition, they provide a dual pathway to utilize captured CO2 via chemical conversion or electrochemical reduction into industrially valuable products. Recent studies show that all these attractive properties can be realized in metal-free CMPs, presenting a truly green option. The promising results in these two fields of CMP applications are reviewed and explored here.

Lanthanide Mimicking by Magnesium for Oxazolidinone Synthesis

In the last decade, magnesium complexes have emerged as a viable alternative to transition-metal catalysts for the hydrofunctionalization of unsaturated bonds. However, their potential for advanced catalytic reactions has not been thoroughly investigated. To address this gap, we have developed a novel magnesium amide compound (3) using a PNP framework that is both bulky and flexible. Our research demonstrates that compound 3 can effectively catalyze the synthesis of biologically significant oxazolidinone derivatives. This synthesis involves a tandem reaction of hydroalkoxylation and cyclohydroamination of isocyanate using propargyl alcohol. Furthermore, we conducted comprehensive theoretical calculations to gain insights into the reaction mechanism. It is important to note that these types of transformations have not been reported for magnesium and would significantly enhance the catalytic portfolio of the 7th most abundant element.

2-Anilidomethylpyridine-Derived Three-Coordinate Zinc Hydride: The Journey Unveils Anilide Backbone's Reactive Nature

Low-coordinate heteroleptic zinc hydrides are catalytically important but rare and synthetically challenging. We herein report three-coordinate monomeric zinc hydride on a 2-anilidomethylpyridine framework (NNL). The synthetic success comes through systematically screening a few different routes from different precursors. During the process, the ligand's anilide backbone interestingly appears to be more reactive than Zn's terminal site to electrophilic Lewis and Brønsted acids. The proligand NNLH reacts with [Zn{N(SiMe3)2}2] and ZnEt2 to give [(NNL)ZnA] (A = N(SiMe3)2 (1), Et(2)). Both are inert to PhSiH3 and H2 but react with HBpin only through the internal Zn-Nanilide bond to give the borylated ligand NNLBpin (3). The reactions of 1 and 2 with Ph3EOH (E = C, Si) afford a series of divergent compounds like [(NNLH)Zn(OSiPh3)2] (4), [Zn3(OSiPh3)4Et2] (5), and [EtZn(OCPh3)] (6). But in all cases, it is invariably the Zn-Nanilide bond protonated by the -OH with equal or higher preference than the terminal Zn-N or Zn-C bonds. A DFT analysis rationalizes the origin of such a reactivity pattern. Realizing that an acid-free route might be the key, reacting [(NNL)Li] with ZnBr2 gives [(NNL)Zn(μ-Br)]2 (7), which on successively treating with KOSiPh3 and PhSiH3 gives the desired [(NNL)ZnH] (8) as a three-coordinate monomer with a terminal Zn-H bond. Estimating the ligand steric in 8 shows the openness in Zn's coordination sphere, a desired criterion for efficient catalysis. This and a positive influence of the pyridyl sidearm is reflected in 8's superior activity in hydroborating PhC(O)Me by HBpin in comparison to Jones' two-coordinate anilido zinc hydride.

Accelerating σ-Bond Metathesis at Sn(II) Centers

Molecular main-group hydride catalysts are attractive as cheap and Earth-abundant alternatives to transition-metal analogues. In the case of the latter, specific steric and electronic tuning of the metal center through ligand choice has enabled the iterative and rational development of superior catalysts. Analogously, a deeper understanding of electronic structure-activity relationships for molecular main-group hydrides should facilitate the development of superior main-group hydride catalysts. Herein, we report a modular Sn-Ni bimetallic system in which we systematically vary the ancillary ligand on Ni, which, in turn, tunes the Sn center. This tuning is probed using Sn L1 XAS as a measure of electron density at the Sn center. We demonstrate that increased electron density at Sn centers accelerates the rate of σ-bond metathesis, and we employ this understanding to develop a highly active Sn-based catalyst for the hydroboration of CO2 using pinacolborane. Additionally, we demonstrate that engineering London dispersion interactions within the secondary coordination sphere of Sn allows for further rate acceleration. These results show that the electronics of main-group catalysts can be controlled without the competing effects of geometry perturbations and that this manifests in substantial reactivity differences.

Donor-Acceptor Activation of Carbon Dioxide

The activation and functionalization of carbon dioxide entails great interest related to its abundance, low toxicity and associated environmental problems. However, the inertness of CO2 has posed a challenge towards its efficient conversion to added-value products. In this review we discuss one of the strategies that have been widely used to capture and activate carbon dioxide, namely the use of donor-acceptor interactions by partnering a Lewis acidic and a Lewis basic fragment. This type of CO2 activation resembles that found in metalloenzymes, whose outstanding performance in catalytically transforming carbon dioxide encourages further bioinspired research. We have divided this review into three general sections based on the nature of the active sites: metal-free examples (mainly formed by frustrated Lewis pairs), main group-transition metal combinations, and transition metal heterobimetallic complexes. Overall, we discuss one hundred compounds that cooperatively activate carbon dioxide by donor-acceptor interactions, revealing a wide range of structural motifs.

One-Pot Synthesis of Dihydropyrans via CO2 Reduction and Domino Knoevenagel/oxa-Diels-Alder Reactions

Catalytic CO₂ reduction with phenylsilane under solvent-free conditions was linked with the one-pot synthesis of 3,4-dihydropyrans from β-dicarbonyl compounds and styrenes. The synthesis includes three processes: (1) bis(silyl)acetal formation from CO₂ and phenylsilane and a domino reaction of (2) Knoevenagel condensation and (3) inverse-electron-demand oxa-Diels-Alder reaction. The first process was catalyzed by a pentanuclear Zn^II complex (0.07 mol %) to generate bis(silyl)acetals, which were hydrolyzed into formaldehyde to be used in the second step.

Mechanism Insights into the Iridium(III)- and B(C6F5)3-Catalyzed Reduction of CO2 to the Formaldehyde Level with Tertiary Silanes

The catalytic system [Ir(CF3CO2)(κ2-NSiMe)2] [1; NSiMe = (4-methylpyridin-2-yloxy)dimethylsilyl]/B(C6F5)3 promotes the selective reduction of CO2 with tertiary silanes to the corresponding bis(silyl)acetal. Stoichiometric and catalytic studies evidenced that species [Ir(CF3COO-B(C6F5)3)(κ2-NSiMe)2] (3), [Ir(κ2-NSiMe)2][HB(C6F5)3] (4), and [Ir(HCOO-B(C6F5)3)(κ2-NSiMe)2] (5) are intermediates of the catalytic process. The structure of 3 has been determined by X-ray diffraction methods. Theoretical calculations show that the rate-limiting step for the 1/B(C6F5)3-catalyzed hydrosilylation of CO2 to bis(silyl)acetal is a boron-promoted Si-H bond cleavage via an iridium silylacetal borane adduct.

Challenges and Prospects in the Catalytic Conversion of Carbon Dioxide to Formaldehyde

Formaldehyde (HCHO) is a crucial C₁ building block for daily-life commodities in a wide range of industrial processes. Industrial production of HCHO today is based on energy- and cost-intensive gas-phase catalytic oxidation of methanol, which calls for exploring other and more sustainable ways of carrying out this process. Utilization of carbon dioxide (CO₂ ) as precursor presents a promising strategy to simultaneously mitigate the carbon footprint and alleviate environmental issues. This Minireview summarizes recent progress in CO₂ -to-HCHO conversion using hydrogenation, hydroboration/hydrosilylation as well as photochemical, electrochemical, photoelectrochemical, and enzymatic approaches. The active species, reaction intermediates, and mechanistic pathways are discussed to deepen the understanding of HCHO selectivity issues. Finally, shortcomings and prospects of the various strategies for sustainable reduction of CO₂ to HCHO are discussed.

Divergent CO2 Activation by Tuning the Lewis Acid in Iron-Based Bimetallic Systems

Bimetallic motifs mediate the selective activation and functionalization of CO₂ in metalloenzymes and some recent synthetic systems. In this work, we build on the nascent concept of bimetallic frustrated Lewis pairs (FLPs) to investigate the activation and reduction of CO₂ . Using the Fe⁰ fragment [(depe)₂ Fe] (depe=1,2-bis(diethylphosphino)ethane) as base, we modify the nature of the partner Lewis acid to accomplish a divergent and highly chemoselective reactivity towards CO₂ . [Au(PMe₂ Ar)]⁺ irreversibly dissociates CO₂ , Zn(C₆ F₅ )₂ and B(C₆ F₅ )₃ yield different CO₂ adducts stabilized by push-pull interactions, while Al(C₆ F₅ )₃ leads to a rare heterobimetallic C-O bond cleavage, and thus to contrasting reduced products after exposure to dihydrogen. Computational investigations provide a rationale for the divergent reactivity, while Energy Decomposition Analysis-Natural Orbital for Chemical Valence (EDA-NOCV) method substantiates the heterobimetallic bonding situation.

Synthesis, characterisation and reactivity of group 2 complexes with a thiopyridyl scorpionate ligand

Herein we report the reactivity of the proligand tris(2-pyridylthio)methane (HTptm) with various Alkaline Earth (AE) reagents: (1) dialkylmagnesium reagents and (2) AE bis-amides (AE = Mg-Ba). Heteroleptic complexes of general formulae [Mg(Tptm)(R)] (R = Me, ⁿBu; Tptm = {C(S-C₅H₄N)₃}^-) and [AE(Tptm)(N'')] (AE = Mg-Ba; N'' = {N(SiMe₃)₂}^-) were targeted from the reaction of HTptm with R₂Mg or [AE(N'')₂]₂. Reaction of the proligand with dialkylmagnesium reagents led to formation of [{Mg(κ³C,N,N-C{Bu}{S-C₅H₄N}₂)(μ-S-C₅H₄N)}₂] (1) and [{Mg(κ³C,N,N-C{Me}{S-C₅H₄N}₂)(μ-OSiMe₃)}₂] (2) respectively, as a result of a novel transfer of an alkyl group onto the methanide carbon with concomitant C-S bond cleavage. However, reactivity of bis-amide precursors for Mg and Ca did afford the target species [AE(Tptm)(N'')] (3-AE; AE = Mg-Ca), although these proved susceptible to ligand degradation processes. DFT calculations show that alkyl transfer in the putative [Mg(Tptm)(ⁿBu)] (1m') system and amide transfer in 3-Ca is a facile process that induces C-S bond cleavage in the Tptm ligand. 3-Mg and 3-Ca were also tested as catalysts for the hydrophosphination of selected alkenes and alkynes, including the first example of mono-hydrophosphination of 4-ethynylpyridine which was achieved with high conversions and excellent regio- and stereochemical control.

Structural Investigation of Magnesium Complexes Supported by a Thiopyridyl Scorpionate Ligand

Herein, we report the synthesis of a series of heteroleptic magnesium complexes stabilized with the scorpionate ligand tris(2-pyridylthio)methanide (Tptm). The compounds of the general formula [Mg(Tptm)(X)] (1-X; X = Cl, Br, I) were obtained via protonolysis reaction between the proligand and selected Grignard reagents. Attempts to isolate the potassium derivative K(Tptm) lead to decomposition of Tptm and formation of the alkene (C₅H₄N-S)₂C=C(C₅H₄N-S)₂, and this degradation was also modelled using DFT methods. Compound 1-I was treated with K(CH₂Ph), affording the degradation product [Mg(Bptm)₂] (2; Bptm = {CH(S-C₅NH₃)₂}⁻). We analyzed and quantified the steric properties of the Tptm ligand using the structural information of the compounds obtained in this study paired with buried volume calculations, also adding the structural data of HTptm and its CF₃-substituted congener (HTptm^CF3). These studies highlight the highly flexible nature of this ligand scaffold and its ability to stabilize various coordination motifs and geometries, which is a highly desirable feature in the design of novel organometallic reagents and catalysts.

Thermally stable zinc hydride catalyst for hydrosilylation of CO2 to silyl formate at atmospheric pressure

Neutral zinc complexes supported by H[PNNO], a diaminophenolate ligand bearing a pendant phosphine group, were synthesized and characterized. The phosphine arm adopts two different configurations in solution and prevents aggregation. The monomeric zinc hydride complex is stable at elevated temperatures up to 125 °C and reacts readily with CO₂ to afford a zinc formate complex. The zinc hydride is active for CO₂ hydrosilylation at atmospheric CO₂ pressure and is selective for CO₂ reduction to the silyl-formate product.

Catalytic reduction of carbon dioxide by a zinc hydride compound, [Tptm]ZnH, and conversion to the methanol level

The zinc hydride compound, [Tptm]ZnH, may achieve the reduction of CO₂ by (RO)₃SiH (R = Me, Et) to the methanol oxidation level, (MeO)_xSi(OR)_4-x, via the formate species, HCO₂Si(OR)₃. However, because insertion of CO₂ into the Zn-H bond is more facile than insertion of HCO₂Si(OR)₃, conversion of HCO₂Si(OR)₃ to the methanol level only occurs to a significant extent in the absence of CO₂.

Synthesis of bis(2-pyridylthio)methyl zinc hydride and catalytic hydrosilylation and hydroboration of CO2

The reactions of bis(2-pyridylthio)methane with Me₂Zn and Zn[N(SiMe₃)₂]₂ afford [Bptm]ZnMe and [Bptm]ZnN(SiMe₃)₂, thereby providing access to a variety of other [Bptm]ZnX derivatives, including the zinc hydride complex [Bptm]ZnH, which serves as a catalyst for the reduction of CO₂ and other carbonyl compounds via hydrosilylation and hydroboration.

Hydroboration of CO2 catalyzed by heteroscorpionate zwitterionic zinc and magnesium hydride complexes

The heteroscorpionate zinc hydride complex LZnH 2, (L = (MePz)₂CP(Ph)₂NPh, MePz = 3,5-dimethylpyrazolyl), its formate complex 3, and magnesium hydride complex LMgH 5 with the same ligand were synthesized and detected for the catalytic hydroboration reaction of CO₂. With BH₃·SMe₂ as the reductant, zinc-based hydride complex 2 and formate complex 3 show a similar capability of hydroboration of CO₂, featuring excellent reactivity and selectivity. The conversion of BH₃·SMe₂ reached 84%, the highest TON of 252 compared to other zinc catalysts was achieved at room temperature and borate ester products at reduction levels of CH₃OH were obtained. Magnesium-based hydride complex 5 showed inferior activity for the hydroboration reduction of CO₂.

Trisyl-based multidentate ligands: synthesis and their transition-metal complexes

Herein we report the synthesis and applications of unusual trisyl-based multidentate ligands [trisyl = tris(trimethylsilyl)methyl, -C(SiMe₃)₃]. First, by applying a new trisyl synthon (Me₃Si)₂CH(SiMe₂CH₂Cl) 1, trisyl-based S- or N-containing compounds 2 were efficiently obtained. On treatment of these compounds 2 with MeLi, their corresponding S- or N-coordinated pincer-like trisyl-based lithium salts 3, including the S-bridged ditrisyl compound 3a [Li{C(SiMe₃)₂SiMe₂CH₂SCH₂SiMe₂C(SiMe₃)₂}Li(DME)₃] and the N-coordinated monotrisyl compounds 3b [(NacNac^DippLiCH₂SiMe₂C(SiMe₃)₂Li(THF)], 3c [Li(THF){C(SiMe₃)₂SiMe₂CH₂N(Me)CH₂C₅H₄N-2}], and 3d [Li{C(SiMe₃)₂SiMe₂CH₂N(Me)CH₂CH₂N(ⁱPr)₂}] were synthesized and structurally characterized by single-crystal X-ray structural analysis. Second, to test these novel lithium salts as straightforward precursors for the synthesis of transition-metal complexes with unique structures, these lithium salts were applied to react with MCl₂ (M = Cr, Mn, Fe, Co). Their corresponding transition-metal complexes 4-8 were obtained in high yields and structurally characterized by single-crystal X-ray structural analysis. Third, the preliminary reactivities of compound 4 were explored.

Acceleration Effect of Bases on Mn Pincer Complex-Catalyzed CO2 Hydroboration

Herein, we report a comprehensive study of CO₂ hydroboration catalyzed by Mn pincer complexes. The traditional metal-ligand cooperation (MLC) mechanism based on the H-Mn-N-Bpin pincer complex is not viable due to the competing abstraction of the Bpin group from the H-Mn-N-Bpin complex by NaO^tBu. Instead, we propose an ionic mechanism based on the H-Mn-N-Na species with a low energy span (22.5 kcal/mol) and unveil the acceleration effect of bases. The X groups in the H-Mn-N-X catalyst models are further modulated, and the steric hindrance and H→B donor-acceptor interactions of the X group increase the energy barrier of the hydride transfer. The hydrogen bond and electrostatic interactions of the X group can accelerate the hydride transfer to HCOOBpin and HCHO molecules except for the nonpolar CO₂ molecule. Based on these discoveries, we designed a pyridine-based Mn pincer catalyst system, which could achieve CO₂ hydroboration in low-temperature and base-free conditions through a metal-ligand cooperation mechanism.

Cobalt-Catalyzed Hydrosilylation of Carbon Dioxide to the Formic Acid, Formaldehyde, and Methanol Level-How to Control the Catalytic Network?

The selective hydrosilylation of carbon dioxide (CO₂) to either the formic acid, formaldehyde, or methanol level using a molecular cobalt(II) triazine complex can be controlled based on reaction parameters such as temperature, CO₂ pressure, and concentration. Here, we rationalize the catalytic mechanism that enables the selective arrival at each product platform. Key reactive intermediates were prepared and spectroscopically characterized, while the catalytic mechanism and the energy profile were analyzed with density functional theory (DFT) methods and microkinetic modeling. It transpired that the stepwise reduction of CO₂ involves three consecutive catalytic cycles, including the same cobalt(I) triazine hydride complex as the active species. The increasing kinetic barriers associated with each reduction step and the competing hydride transfer steps in the three cycles corroborate the strong influence of the catalyst environment on the product selectivity. The fundamental mechanistic insights provide a consistent description of the catalytic system and rationalize, in particular, the experimentally verified opportunity to steer the reaction toward the formaldehyde product as the chemically most challenging reduction level.

Homogeneous Catalysis for Sustainable Energy: Hydrogen and Methanol Economies, Fuels from Biomass, and Related Topics

As the world pledges to significantly cut carbon emissions, the demand for sustainable and clean energy has now become more important than ever. This includes both production and storage of energy carriers, a majority of which involve catalytic reactions. This article reviews recent developments of homogeneous catalysts in emerging applications of sustainable energy. The most important focus has been on hydrogen storage as several efficient homogeneous catalysts have been reported recently for (de)hydrogenative transformations promising to the hydrogen economy. Another direction that has been extensively covered in this review is that of the methanol economy. Homogeneous catalysts investigated for the production of methanol from CO₂, CO, and HCOOH have been discussed in detail. Moreover, catalytic processes for the production of conventional fuels (higher alkanes such as diesel, wax) from biomass or lower alkanes have also been discussed. A section has also been dedicated to the production of ethylene glycol from CO and H₂ using homogeneous catalysts. Well-defined transition metal complexes, in particular, pincer complexes, have been discussed in more detail due to their high activity and well-studied mechanisms.

Ascendancy of Nitrogen Heterocycles in the Computationally Designed Mn(I)PNN Pincer Catalysts on the Hydrogenation of Carbon Dioxide to Methanol

The development of sustainable catalysts to get methanol from CO₂ under milder conditions and without any additives is still considered an arduous task. In many instances, transition-metal-catalyzed carbon dioxide to formic acid formation is more facile than methanol formation. This article provides comprehensive density functional theoretic investigations of six new Mn(I)PNN complexes, which are designed to perform CO₂ to methanol conversion under milder reaction conditions. All these six catalysts have similar structural features except at terminal nitrogen, -N (1), where adenine-inspired nitrogen heterocycles containing pyridine and pyrimidine moieties are attached to instill an electron withdrawing effect on the central metal and thus to facilitate dihydrogen polarization during the catalyst regeneration. All these computationally modeled Mn(I)PNN complexes demonstrate the promising catalytic activity to get methanol through cascade catalytic cycles at 298.15 K. The metal-ligand cooperative (MLC) as well as noncooperative (NC) pathways are investigated for each catalytic cycle. The NC pathway is the preferred pathway for formic acid and formaldehyde formation, whereas methanol formation proceeds through only the MLC pathway. Different nitrogen heterocycles attached to the -N (1) terminal manifested a considerable amount of impact on the Gibbs free energies, overall activation energies, and computed turnover frequencies (TOFs). Among all the catalysts, SPCAT02 provides excellent TOFs for HCO₂H (500 151 h^-1), HCHO (11 912 h^-1), and CH₃OH (2 372 400 h^-1) formation at 50 °C. SPCAT04 is found to be a better catalyst for the selective formation of formic acid formation at room temperature than the rest of the catalysts. The computed TOF results are found reliable upon comparison with experimentally established catalysts. To establish the structure-activity relationship, the activation strain model and Fukui function calculations are performed on all the catalysts. Both these studies provide complementary results. The present study revealed a very important finding that a more electrophilic metal center could facilitate the CO₂ hydrogenation reaction robustly. All computationally designed catalysts could be cheaper and better alternatives to convert CO₂ to methanol under mild reaction conditions in an aqueous medium.

Molecular Main Group Metal Hydrides

This review serves to document advances in the synthesis, versatile bonding, and reactivity of molecular main group metal hydrides within Groups 1, 2, and 12-16. Particular attention will be given to the emerging use of said hydrides in the rapidly expanding field of Main Group element-mediated catalysis. While this review is comprehensive in nature, focus will be given to research appearing in the open literature since 2001.

Deaggregation of Zinc Dihydride by Lewis Acids Including Carbon Dioxide in the Presence of Nitrogen Donors

Thermally sensitive polymeric zinc dihydride [ZnH₂]_n can conveniently be prepared by the reaction of ZnEt₂ with [AlH₃(NEt₃)]. When reacted with CO₂ (1 bar) in the presence of chelating N-donor ligands L_n = N,N,N',N'-tetramethylethylenediamine (TMEDA), N,N,N',N'-tetramethyl-1,3-propanediamine (TMPDA), N,N,N',N″,N''-pentamethyldiethylenetriamine (PMDTA), and 1,4,7,10-tetramethyl-1,4,7,10-tetraazacyclododecane (Me₄TACD), insertion into the Zn-H bond readily occurred. Depending on the denticity n, formates [(L_n)Zn(OCHO)₂] were isolated and structurally characterized, either as a molecule (L_n = TMEDA, TMPDA, PMDTA) or a charge-separated ion pair [(L_n)Zn(OCHO)][OCHO] (L_n = Me₄TACD). The reaction of [ZnH₂]_n with the mild Lewis acid BPh₃ in the presence of chelating N-donor ligands L_n gave a series of hydridotriphenylborates, either as a contact ion pair [(L₂)Zn(H)(HBPh₃)] (L₂ = TMEDA, TMPDA) or a separated ion pair [(L_n)Zn(H)][HBPh₃] (L_n = PMDTA, Me₄TACD). In the crystal, the contact ion pair [(TMEDA)Zn(H)(HBPh₃)] showed a bent Zn-H-B bridge indicative of a delocalized Zn-H-B interaction. In contrast, a linear Zn-H-B bridge for [(TMPDA)Zn(H)(HBPh₃)] was observed, suggesting a contact ion pair. In THF solution, both complexes show an exchange with free BPh₃ as well as [HBPh₃]^-. DFT calculations suggest the presence of [HBPh₃]^- anion with a highly polarized B-H bond that interacts with the Lewis acidic zinc hydride cation [(L₂)Zn(H)]⁺. The hydridotriphenylborates [(L_n)Zn(H)(HBPh₃)] underwent CO₂ insertion to give (formato)zinc (formoxy)triphenylborate complexes [(L_n)Zn(OCHO)][(OCHO)BPh₃] (L_n = TMPDA, PMDTA, Me₄TACD). For L_n = TMEDA, a dinuclear complex [(L_n)₂Zn₂(μ-OCHO)₃][(OCHO)BPh₃] was isolated. Hydridotriphenylborates [(L_n)Zn(H)(HBPh₃)] catalyzed the hydrosilylation of CO₂ (1 bar) by ⁿBuMe₂SiH in THF at 70 °C to give formoxysilane and (methoxy)silane.

Synthesis, Structure, and Reactivity of a Terminal Cadmium Hydride Compound, [κ3-TismPriBenz]CdH

The terminal cadmium hydride compound, [κ³-Tism^PriBenz]CdH, which features the tris[(1-isopropylbenzimidazol-2-yl)dimethylsilyl]methyl ligand, may be obtained via the reactions of either [κ³-Tism^PriBenz]CdN(SiMe₃)₂ or [Tism^PriBenz]CdOSiPh₃ with PhSiH₃. The Cd-H bond of [κ³-Tism^PriBenz]CdH undergoes (a) metathesis reactions with MeI, Me₃SiX (X = Cl, Br, I, NCO), and Me₃SnX (X = Cl, Br, I) to afford the corresponding [Tism^PriBenz]CdX derivative, (b) insertion with CO₂ and CS₂ to afford respectively [Tism^PriBenz]Cd(κ¹-O₂CH) and [Tism^PriBenz]Cd(κ¹-S₂CH), and (c) hydride abstraction with B(C₆F₅)₃ to afford {[Tism^PriBenz]Cd}[HB(C₆F₅)₃] that possesses a rare trigonal monopyramidal geometry for cadmium.

Hydrosilylative reduction of carbon dioxide by a homoleptic lanthanum aryloxide catalyst with high activity and selectivity

An efficient tandem hydrosilylation of CO2, which uses a combination of a simple, homoleptic lanthanum aryloxide and B(C6F5)3, was performed. Use of a less sterically hindered silane led to an exclusive reduction of CO2 to CH4, with a turnover frequency of up to 6000 h-1 at room temperature. The catalytic system is robust, and 19 400 turnovers could be achieved with 0.005 mol% loading of lanthanum. The reaction outcome depended highly on the nature of the silane reductant used. Selective production of the formaldehyde equivalent, i.e., bis(silyl)acetal, without over-reduction, was observed when a sterically bulky silane was used. The reaction mechanism was elucidated by stoichiometric reactions and DFT calculations.

Reaction of a Molybdenum Bis(dinitrogen) Complex with Carbon Dioxide: A Combined Experimental and Computational Investigation

Refluxing Mo(CO)₆ in the presence of the phosphine-functionalized α-diimine ligand ^Ph2PPrDI allowed for substitution and formation of the dicarbonyl complex, (^Ph2PPrDI)Mo(CO)₂. Oxidation with I₂ followed by heating resulted in further CO dissociation and isolation of the corresponding diiodide complex, (^Ph2PPrDI)MoI₂. Reduction of this complex under a N₂ atmosphere afforded the corresponding bis(dinitrogen) complex, (^Ph2PPrDI)Mo(N₂)₂. The solid-state structures of all three compounds were found to feature a tetradentate chelate and cis-monodentate ligands. Notably, the addition of CO₂ to (^Ph2PPrDI)Mo(N₂)₂ is proposed to result in head-to-tail CO₂ coupling to generate the corresponding metallacycle and ultimately a mixture of (^Ph2PPrDI)Mo(CO)₂ and the bis(oxo) dimer, [(κ³-^Ph2PPrDI)Mo(O)(μ-O)]₂. Computational studies have been performed to gain insight into the reaction and evaluate the importance of cis-coordination sites for selective head-to-tail CO₂ reductive coupling, CO deinsertion, disproportionation, and stepwise CO₂ deinsertion.

Cationic Zinc Hydride Catalyzed Carbon Dioxide Reduction to Formate: Deciphering Elementary Reactions, Isolation of Intermediates, and Computational Investigations

Zinc has been an element of choice for carbon dioxide reduction in recent years. Zinc compounds have been showcased as catalysts for carbon dioxide hydrosilylation and hydroboration. The extent of carbon dioxide reduction can depend on various factors, including electrophilicity at the zinc center and the denticity of the ancillary ligands. In a few cases, the addition of Lewis acids to zinc hydride catalysts markedly influences carbon dioxide reduction. These factors have been investigated by exploring elementary reactions of carbon dioxide hydrosilylation and hydroboration by using cationic zinc hydrides bearing tetradentate tris[2-(dimethylamino)ethyl]amine and tridentate N,N,N',N'',N''-pentamethyldiethylenetriamine in the presence of triphenylborane and tris(pentafluorophenyl)borane.

More Than Just a Reagent: The Rise of Renewable Organohydrides for Catalytic Reduction of Carbon Dioxide

Stoichiometric carbon dioxide reduction to highly reduced C1 molecules, such as formic acid (2e^- ), formaldehyde (4e^- ), methanol (6e^- ) or even most-reduced methane (8e^- ), has been successfully achieved by using organosilanes, organoboranes, and frustrated Lewis Pairs (FLPs) in the presence of suitable catalyst. The development of renewable organohydride compounds could be the best alternative in this regard as they have shown promise for the transfer of hydride directly to CO₂ . Reduction of CO₂ by two electrons and two protons to afford formic acid by using renewable organohydride molecules has recently been investigated by various groups. However, catalytic CO₂ reduction to ≥2e^- -reduced products by using renewable organohydride-based molecules has rarely been explored. This Minireview summarizes important findings in this regard, encompassing both stoichiometric and catalytic CO₂ reduction.

Hydrosilyation of CO2 using a silatrane hydride: structural characterization of a silyl formate compound

The silatrane hydride compound, [N(CH2CH2O)3]SiH, reacts with CO2 in the presence of the [tris(2-pyridylthio)methyl]zinc hydride complex, [Tptm]ZnH, to afford the silyl formate and methoxide derivatives, [N(CH2CH2O)3]SiO2CH and [N(CH2CH2O)3]SiOCH3. The molecular structure of [N(CH2CH2O)3]SiO2CH has been determined by X-ray diffraction, thereby demonstrating that the formate ligand adopts a distal conformation in which the uncoordinated oxygen atom resides with a trans-like disposition relative to silicon. Density functional theory calculations indicate that the atrane motif of [N(CH2CH2O)3]SiO2CH is flexible, such that the energy of the molecule changes relatively little as the Si···N distance varies over the range 2.0–3.0 Å.

Partnering a Three-Coordinate Gallium Cation with a Hydroborate Counter-Ion for the Catalytic Hydrosilylation of CO2

A novel β-diketiminate stabilized gallium hydride, (^Dipp L)Ga(Ad)H (where (^Dipp L)={HC(MeCDippN)₂ }, Dipp=2,6-diisopropylphenyl and Ad=1-adamantyl), has been synthesized and shown to undergo insertion of carbon dioxide into the Ga-H bond under mild conditions. In this case, treatment of the resulting κ¹ -formate complex with triethylsilane does not lead to regeneration of the hydride precursor. However, when combined with B(C₆ F₅ )₃ , (^Dipp L)Ga(Ad)H catalyses the reductive hydrosilylation of CO₂ . Under stoichiometric conditions, the addition of one equivalent of B(C₆ F₅ )₃ to (^Dipp L)Ga(Ad)H leads to the formation of a 3-coordinate cationic gallane complex, partnered with a hydroborate anion, [(^Dipp L)Ga(Ad)][HB(C₆ F₅ )₃ ]. This complex rapidly hydrometallates carbon dioxide and catalyses the selective reduction of CO₂ to the formaldehyde oxidation level at 60 °C in the presence of Et₃ SiH (yielding H₂ C(OSiEt₃ )₂ ). When catalysis is undertaken in the presence of excess B(C₆ F₅ )₃ , appreciable enhancement of activity is observed, with a corresponding reduction in selectivity: the product distribution includes H₂ C(OSiEt₃ )₂ , CH₄ and O(SiEt₃ )₂ . While this system represents proof-of-concept in CO₂ hydrosilylation by a gallium hydride system, the TOF values obtained are relatively modest (max. 10 h^-1 ). This is attributed to the strength of binding of the formatoborate anion to the gallium centre in the catalytic intermediate (^Dipp L)Ga(Ad){OC(H)OB(C₆ F₅ )₃ }, and the correspondingly slow rate of the turnover-limiting hydrosilylation step. In turn, this strength of binding can be related to the relatively high Lewis acidity measured for the [(^Dipp L)Ga(Ad)]⁺ cation (AN=69.8).

C-Methylenation of anilines and indoles with CO2 and hydrosilane using a pentanuclear zinc complex catalyst

The one-step C-methylenation of anilines and indoles with CO2 and phenylsilane was catalyzed by a pentanuclear ZnII complex to give diarylmethanes via geminal C-H and C-C bond formation. It is proposed that the zinc-hydride complex generated in situ is a catalytically active species and that bis(silyl)acetal is a key intermediate. When aniline was used as a substrate, both the C-methylenation and N-methylation proceeded.

An air-stable, Zn2+-based catalyst for hydrosilylation of alkenes and alkynes

Hydrosilylation of C[double bond, length as m-dash]C double and C[triple bond, length as m-dash]C triple bonds is one of the most widely used processes in organosilicon chemistry, mostly catalyzed by Pt-based complexes. We report here the synthesis of an air-stable dicationic Zn2+-based complex in a hemilabile tris(2-methyl-6-pyridylmethyl) phosphine (TmPPh) ligand, 12+[B(C6F5)4]2. When heated, 12+[B(C6F5)4]2 activates Si-H bonds reversibly via ligand/metal cooperation between Lewis acidic Zn2+ and Lewis basic N centers in a frustrated Lewis pair (FLP) type fashion. Consequently, 12+[B(C6F5)4]2 was found to be an effective catalyst for hydrosilylation reactions of C[double bond, length as m-dash]C double and C[triple bond, length as m-dash]C triple bonds. Remarkably, these hydrosilylation reactions can be loaded under aerobic conditions, as well as, in some cases, work under neat conditions. The mechanism of the activation of the Si-H bond and the hydrosilylation reaction is proposed based on experiments and density functional theory (DFT) calculations.

Molecular Zinc Hydride Cations [ZnH]+ : Synthesis, Structure, and CO2 Hydrosilylation Catalysis

Protonolysis of [ZnH2 ]n with the conjugated Brønsted acid of the bidentate diamine TMEDA (N,N,N',N'-tetramethylethane-1,2-diamine) and TEEDA (N,N,N',N'-tetraethylethane-1,2-diamine) gave the zinc hydride cation [(L2 )ZnH]+ , isolable either as the mononuclear THF adduct [(L2 )ZnH(thf)]+ [BArF 4 ]- (L2 =TMEDA; BArF 4 - =[B(3,5-(CF3 )2 -C6 H3 )4 ]- ) or as the dimer [{(L2 )Zn)}2 (μ-H)2 ]2+ [BArF 4 ]- 2 (L2 =TEEDA). In contrast to [ZnH2 ]n , the cationic zinc hydrides are thermally stable and soluble in THF. [(L2 )ZnH]+ was also shown to form di- and trinuclear adducts of the elusive neutral [(L2 )ZnH2 ]. All hydride-containing cations readily inserted CO2 to give the corresponding formate complexes. [(TMEDA)ZnH]+ [BArF 4 ]- catalyzed the hydrosilylation of CO2 with tertiary hydrosilanes to give stepwise formoxy silane, methyl formate, and methoxy silane. The unexpected formation of methyl formate was shown to result from the zinc-catalyzed transesterification of methoxy silane with formoxy silane, which was eventually converted into methoxy silane as well.

What Fluorine Can Do in CO2 Chemistry: Applications from Homogeneous to Heterogeneous Systems

CO₂ chemistry including capture and fixation has attracted great attention towards the aim of reducing the consumption of fossil fuels and CO₂ accumulation in the atmosphere. "CO₂ -philic" materials are required to achieve good performance owing to the intrinsic properties of the CO₂ molecule, that is, thermodynamic stability and kinetic inertness. In this respect, fluorinated materials have been deployed in CO₂ capture (physical and chemical pathway) or fixation (thermo- and electrocatalytic procedure) with good performances, including homogeneous (e. g., ionic liquids and small organic molecules) and heterogeneous counterparts (e. g., carbons, porous organic polymers, covalent triazine frameworks, metal-organic frameworks, and membranes). In this Minireview, these works are summarized and analyzed from the aspects of (1) the strategy used for fluorine introduction, (2) characterization of the targeted materials, (3) performance of the fluorinated systems in CO₂ chemistry, and comparison with the nonfluorinated counterparts, (4) the role of fluorinated functionalities in the working procedure, and (5) the relationship between performance and structural/electronic properties of the materials. The systematic summary in this Minireview will open new opportunities in guiding the design of "CO₂ -philic" materials and pave the way to stimulate further progress in this field.