Well-Dispersed Ruthenium in Mesoporous Crystal TiO2 as an Advanced Electrocatalyst for Hydrogen Evolution Reaction

Ruthenium-based single atom catalysts: synthesis and application in the electrocatalytic hydrogen evolution reaction

Electrocatalytic water splitting is a promising production method for green hydrogen; however, its practical application is limited by the lack of robust catalysts for the cathode hydrogen evolution reaction (HER). Recently, the use of Ru in electrocatalytic HER has become a research hotspot because Ru has a metal-hydrogen bond strength similar to that of Pt - known for its excellent HER activity - but has a lower cost than Pt. Numerous modification strategies are available to further improve the HER activity of metal Ru such as vulcanisation, phosphating and atomisation. The atomisation strategy has attracted much attention owing to its extremely high Ru atomic utilisation efficiency and tunable electronic structures. However, isolated studies could not effectively address the bottlenecks. Therefore, to promote the effective exploration of Ru-based single-atom catalysts and clarify the research status in this field, studies on related topics (e.g. Ru single-atom catalysts, Ru dual-atom catalysts, composite catalysts containing single-atom Ru and Ru nanoparticles) have been systematically and briefly summarised herein. Finally, the research challenges and prospects of Ru-based single-atom catalysts in the HER field have been discussed, which may provide valuable insights for further research.

Ru Regulated Electronic Structure of PdxCuy Nanosheets for Efficient Hydrogen Evolution Reaction in Wide pH Range

The development of highly effective catalysts for hydrogen evolution reaction (HER) in a wide pH range is crucial for the sustainable utilization of green energy utilization, while the slow kinetic reaction rate severely hinders the progress of HER. Herein, the reaction kinetic issue is solved by adjusting the electronic structure of the Ru/PdxCuy catalysts. The champion catalyst displays a remarkable performance for HER with the ultralow overpotential (27, 28, and 97 mV) in 1.0 m KOH, 0.5 m H2SO4, and 1.0 m PBS at 10 mA cm-2 and high the mass activity (3036 A g-1), respectively, superior to those of commercial Pt/C benchmarks and most of reported electrocatalysts, mainly due to its low reaction activation energy. Density functional theory (DFT) calculations indicate that Ru doping contributes an electron-deficient 3d band, which promotes water adsorption. Additionally, this also leads to an upward shift of the d-band center of Pd and a downward shift of the d-band center of Cu, further optimizing the adsorption/dissociation of H2O and H*. Results from this work may provide an insight into the design and synthesis of high-performance pH-universal HER electrocatalysts.

Recent Progress of Ion-Modified TiO2 for Enhanced Photocatalytic Hydrogen Production

Harnessing solar energy to produce hydrogen through semiconductor-mediated photocatalytic water splitting is a promising avenue to address the challenges of energy scarcity and environmental degradation. Ever since Fujishima and Honda's groundbreaking work in photocatalytic water splitting, titanium dioxide (TiO2) has garnered significant interest as a semiconductor photocatalyst, prized for its non-toxicity, affordability, superior photocatalytic activity, and robust chemical stability. Nonetheless, the efficacy of solar energy conversion is hampered by TiO2's wide bandgap and the swift recombination of photogenerated carriers. In pursuit of enhancing TiO2's photocatalytic prowess, a panoply of modification techniques has been explored over recent years. This work provides an extensive review of the strategies employed to augment TiO2's performance in photocatalytic hydrogen production, with a special emphasis on foreign dopant incorporation. Firstly, we delve into metal doping as a key tactic to boost TiO2's capacity for efficient hydrogen generation via water splitting. We elaborate on the premise that metal doping introduces discrete energy states within TiO2's bandgap, thereby elevating its visible light photocatalytic activity. Following that, we evaluate the role of metal nanoparticles in modifying TiO2, hailed as one of the most effective strategies. Metal nanoparticles, serving as both photosensitizers and co-catalysts, display a pronounced affinity for visible light absorption and enhance the segregation and conveyance of photogenerated charge carriers, leading to remarkable photocatalytic outcomes. Furthermore, we consolidate perspectives on the nonmetal doping of TiO2, which tailors the material to harness visible light more efficiently and bolsters the separation and transfer of photogenerated carriers. The incorporation of various anions is summarized for their potential to propel TiO2's photocatalytic capabilities. This review aspires to compile contemporary insights on ion-doped TiO2, propelling the efficacy of photocatalytic hydrogen evolution and anticipating forthcoming advancements. Our work aims to furnish an informative scaffold for crafting advanced TiO2-based photocatalysts tailored for water-splitting applications.

Efficient Electrocatalytic Ammonia Synthesis via Theoretical Screening of Titanate Nanosheet-Supported Single-Atom Catalysts

The electrocatalytic nitrogen reduction reaction (NRR) for synthesizing ammonia holds promise as an alternative to the traditional high-energy-consuming Haber-Bosch method. Rational and accurate catalyst design is needed to overcome the challenge of activating N2 and to suppress the competitive hydrogen evolution reaction (HER). Single-atom catalysts have garnered widespread attention due to their 100% atom utilization efficiency and unique catalytic performance. In this context, we constructed theoretical models of metal single-atom catalysts supported on titanate nanosheets (M-TiNS). Initially, density functional theory (DFT) was employed to screen 12 single-atom catalysts for NRR- and HER-related barriers, leading to the identification of the theoretically optimal NRR catalyst, Ru-TiNS. Subsequently, experimental synthesis of the Ru-TiNS single-atom catalyst was successfully achieved, exhibiting excellent performance in catalyzing NRR, with the highest NH3 yield rate reaching 15.19 μmol mgcat-1 h-1 and a Faradaic efficiency (FE) of 15.3%. The combination of experimental results and theoretical calculations demonstrated the efficient catalytic ability of Ru sites, validating the effectiveness of the constructed theoretical screening process and providing a theoretical foundation for the design of efficient NRR catalysts.

Engineering Interfacial Pt─O─Ti Site at Atomic Step Defect for Efficient Hydrogen Evolution Catalysis

The hydrogen evolution reaction (HER) activity of defect-stabilized low-Pt-loading catalysts is closely related with defect type in support materials, while the knowledge about the effect of higher-dimensional defects on the property and activity of trapped Pt atomic species is scarce. Herein, small size (5-10 nm) TiO2 nanoparticles with abundant surface step defects (one kind of line defect) are used to direct the uniform anchoring of Pt atomic clusters (Pt-ACs) via Pt─O─Ti linkage. The as-made low-Pt catalysts (Pt-ACs/S-TiO2-NP) exhibit exceptional HER intrinsic activity due to the unique step-site Pi-O-Ti species, in which the mass activity and turnover frequency are as high as 21.46 A mg Pt -1 and 21.69 s-1 at the overpotential of 50 mV, both far beyond those of benchmark Pt/C catalysts and other Pt-ACs/TiO2 samples with less step sites. Spectroscopic measurements and theoretical calculations reveal that the step-defect-located Pt─O─Ti sites can simultaneously induce the charge transfer from TiO2 substrate to the trapped Pt-ACs and the downshift of d-band center, which helps the proton reduction to H* intermediates and the following hydrogen desorption process, thus improving the HER. The work provides a deep insight on the interactions between high-dimensional defect and well-dispersed atomic metal motifs for superior HER catalysis.

Cellulose supported TiO2/Cu2O for highly asymmetric conjugate addition of α,β-unsaturated compounds in aqueous phase

A series of new kind green cellulose-supported bimetallic TiO2/Cu2O (Cell@TiO2/Cu2O) catalytic materials were obtained by in-situ reduction method employing cellulose as the carrier. The effects of metal percentage composition on the morphology and construction of the catalytic materials were systematically investigated. The Cell@TiO2/Cu2O were characterized by FT-IR, TG, XPS, SEM, TEM, EDS, and the element content was obtained by elemental analysis. Then, the achieved catalytic materials were applied to the chiral borylation reaction of α,β-unsaturated compounds, including nitrile compounds, esters, and α,β-unsaturated ketones. Remarkably, this approach provides an efficient strategy to gain an important class of chiral organic boron compounds with target chiral products in high yields as well as enantioselectivities. Besides, the Cell@TiO2/Cu2O could be easily recycled and effectively reused. This work constructed bimetallic TiO2/Cu2O on cellulose as a newly catalyst to obtain chiral boron compounds in aqueous phase.

Observation of High-Capacity Monoclinic B-Nb2O5 with Ultrafast Lithium Storage

Apart from Li4Ti5O12, there are few anode substitutes that can be used in commercial high-power lithium-ion batteries. Orthorhombic T-Nb2O5 has recently been proven to be another substitute anode. However, monoclinic B-Nb2O5 of same chemistry is essentially inert for lithium storage, but the underlying reasons are unclear. In order to activate the "inert" B-Nb2O5, herein, nanoporous pseudocrystals to achieve a larger specific capacity of 243 mAh g-1 than Li4Ti5O12 (theoretical capacity: 175 mAh g-1) are proposed. These pseudocrystals are rationally synthesized via a "shape-keep" topological microcorrosion process from LiNbO3 precursor. Compared to pristine B-Nb2O5, experimental investigations reveal that B-Nb2O5- x delivers ≈3000 times higher electronic conductivity and tenfold enhanced Li+ diffusion coefficient. An ≈30% reduction of energy barrier for Li-ion migration is also confirmed by the theoretical calculations. The nanoporous B-Nb2O5- x delivers unique ion/electron transport channels to proliferate the reversible and deeper lithiation, which activate the "inert" B-Nb2O5. The capacitive-like behavior is observed to endow B-Nb2O5- x ultrafast lithium storage ability, harvesting 136 mAh g-1 at 100 C and 72 mAh g-1 even at 250 C, superior to Li4Ti5O12. Pouch-type full cells exhibit the energy density of ≈251 Wh kg-1 and ultrahigh power density up to ≈35 kW kg-1.

Energy-Efficient Electrosynthesis of High Value-Added Active Chlorine Coupled with H2 Generation from Direct Seawater Electrolysis through Decoupling Electrolytes

Direct saline (seawater) electrolysis is a well-recognized system to generate active chlorine species for the chloride-mediated electrosynthesis, environmental remediation and sterilization over the past few decades. However, the large energy consumption originated from the high cell voltage of traditional direct saline electrolysis system, greatly restricts its practical application. Here, we report an acid-saline hybrid electrolysis system for energy-saving co-electrosynthesis of active chlorine and H2. We demonstrate that this system just requires a low cell voltage of 1.59 V to attain 10 mA cm-2 with a large energy consumption decrease of 27.7 % compared to direct saline electrolysis system (2.20 V). We further demonstrate that such acid-saline hybrid electrolysis system could be extended to realize energy-saving and sustainable seawater electrolysis. The acidified seawater in this system can absolutely avoid the formation of Ca/Mg-based sediments that always form in the seawater electrolysis system. We also prove that this system in the half-flow mode can realize real-time preparation of active chlorine used for sterilization and pea sprout production.

Water-Mediated Selectivity Control of CH3 OH versus CO/CH4 in CO2 Photoreduction on Single-Atom Implanted Nanotube Arrays

Controllable methanol production in artificial photosynthesis is highly desirable due to its high energy density and ease of storage. Herein, single atom Fe is implanted into TiO2 /SrTiO3 (TSr) nanotube arrays by two-step anodization and Sr-induced crystallization. The resulting Fe-TSr with both single Fe reduction centers and dominant oxidation facets (001) contributes to efficient CO2 photoreduction and water oxidation for controlled production of CH3 OH and CO/CH4 . The methanol yield can reach to 154.20 µmol gcat -1 h-1 with 98.90% selectivity by immersing all the catalyst in pure water, and the yield of CO/CH4 is 147.48 µmol gcat -1 h-1 with >99.99% selectivity when the catalyst completely outside water. This CH3 OH yield is 50 and 3 times higher than that of TiO2 and TSr and stands among all the state-of-the-art catalysts. The facile gas-solid and gas-liquid-solid phase switch can selectively control CH3 OH production from ≈0% (above H2 O) to 98.90% (in H2 O) via slowly immersing the catalyst into water, where abundant •OH and H2 O around Fe sites play important role in selective CH3 OH production. This work highlights a new insight for water-mediated CO2 photoreduction to controllably produce CH3 OH.

Electronic configuration regulation of single-atomic Mn sites mediated by Mo/Mn clusters for an efficient hydrogen evolution reaction

Tuning the electron distribution of metal single-atom active sites via bimetallic clusters is an effective way to enhance their hydrogen evolution reaction (HER) activity, but remains a great challenge. A biochar-based electrocatalyst (BCMoMn800-2) with both MnN4 active sites and Mo2C/Mn7C3 clusters was synthesized using in situ enriched Mo/Mn biomass as a precursor to trigger the HER. Various characterization and density functional theory (DFT) calculation results indicated that the presence of Mo2C/Mn7C3 clusters in BCMoMn800-2 effectively induced the redistribution of charges at MnN4 sites, reducing the energy of H* activation during the HER. In 0.5 M H2SO4, the overpotential was 27.4 mV at a current density of 10 mA cm-2 and the Tafel slope was 31 mV dec-1, and its electrocatalytic performance was close to that of Pt/C. The electrocatalyst also exhibited excellent electrocatalytic stability and durability. This work might provide a new strategy for solid waste recycling and constructing efficient HER electrocatalysts.

Ion-Sieve-Confined Synthesis of Size-Tunable Ru for Electrochemical Hydrogen Evolution

The controllable and low-cost synthesis of nanometal particles is highly desired in scientific and industrial research. Herein, size-tunable Ru nanoparticles were synthesized by using a novel ion-sieve-confined reduction method. The H2TiO3 ion-sieve was used to adsorb Ru3+ into the hydroxyl-enriched porous [TiO3]2- layers. The confined environment of the interlayer space facilitates Ru-Ru collision and bonding during annealing, achieving a precise reduction from Ru3+ to Ru0 without additional reductants. Owing to the confinement effect, Ru0 nanoparticles are uniformly embedded in the pores on the surface of the postannealed TiO2 matrix (Ru@TiO2). Ru@TiO2 exhibited a lower overpotential than Pt/C (57 vs 87 mV at 10 mA cm-2) for the HER in 0.1 M KOH solution. The confinement-induced reduction of metal ions was also preliminarily proved in ion-exchanged zeolites, which provides facile and abundant approaches for the size-controllable synthesis of nanometal catalysts with high catalytic activity.

Constructing Interfacial Oxygen Vacancy and Ruthenium Lewis Acid-Base Pairs to Boost the Alkaline Hydrogen Evolution Reaction Kinetics

Simultaneous optimization of the energy level of water dissociation, hydrogen and hydroxide desorption is the key to achieving fast kinetics for the alkaline hydrogen evolution reaction (HER). Herein, the well-dispersed Ru clusters on the surface of amorphous/crystalline CeO2-δ (Ru/ac-CeO2-δ ) is demonstrated to be an excellent electrocatalyst for significantly boosting the alkaline HER kinetics owing to the presence of unique oxygen vacancy (VO ) and Ru Lewis acid-base pairs (LABPs). The representative Ru/ac-CeO2-δ exhibits an outstanding mass activity of 7180 mA mgRu -1 that is approximately 9 times higher than that of commercial Pt/C at the potential of -0.1 V (V vs RHE) and an extremely low overpotential of 21.2 mV at a geometric current density of 10 mA cm-2 . Experimental and theoretical studies reveal that the VO as Lewis acid sites facilitate the adsorption of H2 O and cleavage of H-OH bonds, meanwhile, the weak Lewis basic Ru clusters favor for the hydrogen desorption. Importantly, the desorption of OH from VO sites is accelerated via a water-assisted proton exchange pathway, and thus boost the kinetics of alkaline HER. This study sheds new light on the design of high-efficiency electrocatalysts with LABPs for the enhanced alkaline HER.

Interface Engineering of PtZn Alloy and Nb2O5 for Promoting Ammonia Oxidation Reaction and Hydrogen Evolution Reaction

Ammonia electrolysis is a promising technology to obtain green hydrogen with zero-carbon emission, in which ammonia oxidation reaction (AOR) and hydrogen evolution reaction (HER) occur at the anode and cathode, respectively. However, the lack of efficient catalysts hinders its practical application. Herein, PtZn alloy is combined with Nb2O5 to construct a bifunctional heterostructure catalyst (PtZn-Nb2O5/C). The optimal sample with Nb2O5 content of 7.05 wt % demonstrates the best performance with a peak current density of 304.1 mA mg-1Pt for AOR, and it is only reduced by 17.0% after 4000 cycles of durability tests. For HER, it has a low overpotential of 34 mV at -10 mA cm-2 under the alkaline condition. This can be ascribed to the interfacial interaction between the PtZn alloy and Nb2O5, which adjusts the adsorption behavior of OHad to concurrently promote AOR and HER activity. This work thus proposes a viable strategy to design an efficient bifunctional catalyst for hydrogen generation from ammonia electrolysis.

RuSe2/CeO2heterostructure as a novel electrocatalyst for highly efficient alkaline hydrogen evolution

Constructing heterojunction to adjust the electronic structure of catalysts is a promising strategy for synergistically improving electrocatalytic activity. In addition, RuSe2is recognized as an effective alternative to Pt for boosting alkaline hydrogen evolution reaction (HER) on account of its outstanding catalytic properties. Herein, novel RuSe2/CeO2heterojunction electrocatalysts are fabricated through hydrothermal and thermal treatment methods. The optimal 50% RuSe2/CeO2heterojunction electrocatalyst exhibits a low HER overpotential of 16 mV to attain 10 mA cm-2current density and Tafel slope of 66.1 mV dec-1for hydrogen evolution in 1.0 M KOH. At the same time, the 50% RuSe2/CeO2heterojunction electrocatalyst also maintains a stable HER activity for 50 h or 3000 CV cycles. The experimental results show that formation of heterogeneous interface between RuSe2and CeO2results in the redistribution of electrons at the RuSe2/CeO2interface, thereby changing the electronic structure of RuSe2and enhancing the performance of the RuSe2/CeO2electrocatalyst. This work may provide a feasible way to design efficient hydrogen evolution heterojunction electrocatalysts by modulating the electronic structure in alkaline electrolytes.

Nb2 AlC MAX Nanosheets Supported Ru Nanocrystals as Efficient Catalysts for Boosting pH-Universal Hydrogen Production

MAX phase combines both ceramic and metallic properties, which exhibits widespread application prospects. 2D MAX nanosheets have more abundant surface-active sites, being anticipated to improve the performance of surface-related applications. Herein, for the first time, 2D Nb2 AlC nanosheets (NSs) as novel supports anchored with Ru catalysts for overall water splitting are developed. The optimized catalyst of Ru@Nb2 AlC NSs exhibit Pt-comparable kinetics and superior catalytic activity toward hydrogen evolution reaction (HER) (low overpotentials of 61 and 169 mV at 10 and 100 mA cm-2 , respectively) with excellent durability (5000 cycles or 80 h) in alkaline media. In particular, Ru@Nb2 AlC NSs achieve a mass activity of ≈4.8 times larger than the commercial Pt/C (20 wt.%) catalyst. The post-oxidation resultant catalyst of RuO2 @Nb2 AlC NSs also exhibit boosting HER and oxygen evolution reaction activities and ≈100% Faraday efficiency for overall water splitting with a cell voltage of 1.61 V to achieve 10 mA cm-2 . Therefore, the novel category of 2D MAX supports anchored with Ru nanocrystals offers a novel strategy for designing a wide range of MAX-supported metal catalysts for the renewable energy field.

Uncovering the centrality of mono-dentate SO32-/SO42- modifiers grafted on a metal vanadate in accelerating wet NOX reduction and poison pyrolysis

NOX rarely binds with labile oxygens of catalytic solids, whose Lewis acidic (LA) species possess higher binding strengths with NH3 (ENH3) and H2O than Brönsted acidic counterparts (BA--H+; -OH), oftentimes leading to elevate energy barrier (EBARRIER) and weaken H2O tolerance, respectively. These limit NH3-assisted wet NOX reduction via Langmuir-Hinshelwood-type or Eley-Rideal (ER)-type model on LA species, while leaving ER-type analogue on BA--H+ species proper to reduce wet NOX. Given hard-to-regulate strength/amount of -OH species and occasional association between ENH3 and EBARRIER, Ni1V2O6 (Ni1) was rationally chosen as a platform to isolate mono-dentate SO32-/SO42- species for use as BA--H+ bonds via protonation to increase collision frequency (k'APP,0) alongside with disclosure of advantages of SO32-/SO42--functionalized Ni1V2O6 (Ni1-S) over Ni1 in reducing wet NOX. Ni1-S outperformed Ni1 in achieving a larger BA--H+ quantity (k'APP,0↑), increasing H2O tolerance, and elevating oxygen mobility, thus promoting NOX reduction activity/consequences under SO2-excluding gases. V2O5-WO3 composite simulating a commercial catalyst could isolate mono-dentate SO32-/SO42- species and served as a control (V2O5-WO3-S) for comparison. Ni1-S was superior to V2O5-WO3-S in evading ammonium (bi-)sulfate (AS/ABS) poison accumulation and expediting AS/ABS pyrolysis efficiency, thereby improving AS/ABS resistance under SO2-including gases, while enhancing resistance against hydro-thermal aging.

BaRuO3 coated Ti plate as an efficient and stable electro-catalyst for water splitting reaction in alkaline medium

Water splitting using an electrochemical device to produce hydrogen fuel is a green and economic approach to solve the energy and environmental crisis. The realistic design of durable electro-catalysts and their synthesis using a simplistic technique is a great challenge to produce hydrogen by water electrolysis. Herein, we report a stable highly active barium ruthenium oxide (BRO) electro-catalysts over Ti plate using a soft chemical method at low temperature. The synthesized material shows facile hydrogen evolution reaction (HER) as well as oxygen evolution reaction (OER) in alkaline medium with over-potentials of 195 mV and 300 mV, respectively at a current density of 10 mA cm-2. The excellent stability lasts for at least 24 h without any degradation for both the HER and OER at the current density of 10 mA cm-2, inferring the practical applications of the material toward production of green hydrogen energy. Certainly, the synthesized catalyst is capable adequately for the overall water splitting at a cell voltage of 1.60 V at a current density of 10 mA cm-2 with an impressive stability for at least 24 h, showing a minimum loss of potential. Thus the present work contributes to the rational design of stable and efficient electro-catalysts for overall water splitting reaction in alkaline media.

RuSe2-CoTe Heterogeneous Surfaces Coated with NC Layer for Excellent HER Performance under Alkaline Condition

Electrocatalytic hydrogen production has been a promising high-purity hydrogen production technology, attracting a large number of researchers' research interest. Ru has a hydrogen binding capacity similar to Pt, but its price is far lower than Pt, making it a promising alternative to Pt. However, a single Se electronic structure modulation is not sufficient to enable RuSe2 to be used for practical applications on a large scale due to the lack of electrons. Therefore, choosing a suitable way to electronically modulate the Ru atoms in RuSe2 can effectively improve the activity of the catalyst. Cobalt telluride (CoTe) can significantly enhance electrocatalytic performance due to tellurium's low electronegativity and excellent metal properties. In this work, the NC layer possesses excellent electrical conductivity and CoTe acts as an electron donor to optimize the electronic structure locally and trigger electron transfer efficiently. The RuSe2-CoTe/NC electrode requires an overpotential of only 25.4 mV (10 mA cm-2), which is superior to that of RuSe2/NF (65 mV) and CoTe/NC (115 mV). Meanwhile, the Tafel slope of RuSe2-CoTe/NC (67.8 mV dec-1) was better than that of RuSe2/NF (113.6 mV dec-1) and CoTe/NC (209.5 mV dec-1), showing that the build-up of the superior heterojunction makes the RuSe2-CoTe/NC with better hydrogen evolution reaction (HER) reaction kinetics. In addition, after 30 h of long-term stability testing, no significant decrease in catalytic activity was observed, proving the good stability of the RuSe2-CoTe/NC catalyst.

Platinum Species on Oxygen Vacancy-Rich Titania for Efficient Basic Electrocatalytic Hydrogen Evolution

Oxygen vacancy-rich titania is a promising support for enhancing the hydrogen evolution reaction (HER). This work innovatively loaded Pt nanoparticles on oxygen vacancy-rich TiO2 (Pt/Vo-TiO2) in situ by using a photocatalytic device. The synthesis conditions are mild, do not require high temperatures and strong reducing agents, and can avoid the accumulation of platinum species. X-ray photoelectron spectroscopy (XPS) and X-ray absorption spectrometry (XAS) verified the synergistic effect of Pt species and oxygen vacancies on the progress of the reaction kinetics, where the Pt particles exposed by the in situ synthesis functioned as reaction sites in the electrocatalytic hydrogen evolution. Based on this, Pt/Vo-TiO2 exhibits excellent electrocatalytic performance with an overpotential of only 56 mV at a current density of 10 mA cm-2 and a Tafel slope of only 73.5 mV dec-1. This work provides a new strategy for designing highly efficient HER catalysts.

Self-Accommodation Induced Electronic Metal-Support Interaction on Ruthenium Site for Alkaline Hydrogen Evolution Reaction

Tuning the metal-support interaction of supported metal catalysts has been found to be the most effective approach to modulating electronic structure and improving catalytic performance. But practical understanding of the charge transfer mechanism at the electronic level of catalysis process has remained elusive. Here, it is reported that ruthenium (Ru) nanoparticles can self-accommodate into Fe₃ O₄ and carbon support (Ru-Fe₃ O₄ /C) through the electronic metal-support interaction, resulting in robust catalytic activity toward the alkaline hydrogen evolution reaction (HER). Spectroscopic evidence and theoretical calculations demonstrate that electronic perturbation occurred in the Ru-Fe₃ O₄ /C, and that charge redistribution directly influenced adsorption behavior during the catalytic process. The RuO bond formed by orbital mixing changes the charge state of the surface Ru site, enabling more electrons to flow to H intermediates (H^* ) for favorable adsorption. The weak binding strength of the RuO bond also reinforces the anti-bonding character of H* with a more favorable recombination of H* species into H₂ molecules. Because of this satisfactory catalytic mechanism, the Ru-Fe₃ O₄ /C supported nanoparticle catalyst demonstrated better HER activity and robust stability than the benchmark commercial Pt/C benchmark in alkaline media.

A combined experimental and theoretical study of RuO2/TiO2 heterostructures as a photoelectrocatalyst for hydrogen evolution

We report a joint experimental and theoretical study of RuO₂/TiO₂ heterostructures. In the experimental section, mesoporous RuO₂/TiO₂ heterostructures were prepared by impregnation of mesoporous TiO₂ nanoparticles which were synthesized from a new precursor, Na₂[Ti(C₂O₄)₃], in an aqueous solution of ruthenium(III) chloride followed by calcination at 300 °C. Using various techniques, the prepared TiO₂ and RuO₂/TiO₂ heterostructures were extensively characterized. The photoelectocatalytic application of the as-prepared heterostructures was then investigated toward the hydrogen evolution reaction (HER). The results illustrated that RuO₂ is dispersed uniformly on the TiO₂ surface. The loading of RuO₂ on TiO₂ decreases the band gap energy and extends the absorption edge to the visible light region. This wide absorption extends the photoelectrocatalytic activity of RuO₂/TiO₂ heterostructures. To obtain a deeper understanding of the increase of the photoelectrocatalytic activity of RuO₂/TiO₂ heterostructures compared to pure TiO₂, theoretical calculations at the density functional theory (DFT) level were performed on some model clusters of pure TiO₂ and the RuO₂/TiO₂ heterostructure. The theoretical results elucidated that the recombination ratio of electron-hole pairs decreases effectively for RuO₂/TiO₂ compared to pure TiO₂.

Atomic-Level Pt Electrocatalyst Synthesized via Iced Photochemical Method for Hydrogen Evolution Reaction with High Efficiency

In heterogeneous catalysis, metal particle morphology and size can influence markedly the activity. It is of great significance to rationally design and control the synthesis of Pt at the atomic level to demonstrate the structure-activity relationship toward electrocatalysis. Herein, a powerful strategy is reported to synthesize graphene-supported platinum-based electrocatalyst, that is, nanocatalysts with controllable size can be prepared by iced photochemical method, including single atoms (Pt-SA@HG), nanoclusters (Pt-Clu@HG), and nanocrystalline (Pt-Nc@HG). The Pt-SA@HG exhibits unexpected electrocatalytic hydrogen evolution reaction (HER) performances with 13 mV overpotential at 10 mA cm^-2 current densities which surpass Pt-Clu@HG and Pt-Nc@HG. The in situ X-ray absorption fine structure spectroscopy (XAFS) and density functional theory (DFT) calculations determine the Pt-C₃ active site is linchpin to the excellent HER performance of Pt-SA@HG. Compared with the traditional Pt-N_x coordination structure, the pure carbon coordinated Pt-C₃ site is more favorable for HER. This work opens up a new way to adjust the metal particle size and catalytic performance of graphene at a multiscale level.

Surface Design Strategy of Catalysts for Water Electrolysis

Hydrogen, a new energy carrier that can replace traditional fossil fuels, is seen as one of the most promising clean energy sources. The use of renewable electricity to drive hydrogen production has very broad prospects for addressing energy and environmental problems. Therefore, many researchers favor electrolytic water due to its green and low-cost advantages. The electrolytic water reaction comprises the oxygen evolution reaction (OER) and the hydrogen evolution reaction (HER). Understanding the OER and HER mechanisms in acidic and alkaline processes contributes to further studying the design of surface regulation of electrolytic water catalysts. The OER and HER catalysts are mainly reviewed for defects, doping, alloying, surface reconstruction, crystal surface structure, and heterostructures. Besides, recent catalysts for overall water splitting are also reviewed. Finally, this review paves the way to the rational design and synthesis of new materials for highly efficient electrocatalysis.

The influence of the oxygen vacancies on the Pt/TiO2 single-atom catalyst-a DFT study

The titanium dioxide (TiO₂) surface is suitable as a substrate for single-atom catalysts (SACs) for oxygen reduction reaction (ORR). As a common defect on TiO₂, oxygen vacancies may have a significant impact on the adsorption and activity of the adatoms. This work aims to investigate whether titanium dioxide containing surface oxygen vacancies is more suitable as a base material for SACs. This paper calculates the changes in the adsorption energy of the Pt atom and the energy of the d-band center on the perfect surface and the surface containing oxygen vacancies. Concerning the perfect surface, the surface containing oxygen vacancies fixes the Pt atom more firmly and increases the center energy of the d-band of Pt, thereby improving the performance of the Pt atom as SACs. Consequently, the (110) surface of rutile TiO₂ with oxygen vacancies may be the best substrate for SACs.

Synergistic modulation of inverse spinel Fe3O4 by doping with chromium and nitrogen for efficient electrocatalytic water splitting

Earth-abundant Fe-based oxides have drawn less attention in electrocatalytic water splitting owing to the inferior intrinsic activity and poor conductivity. Therefore, developing an effective method to increase the catalytic performance of Fe-based oxides is of great importance for the practical application. Herein, a novel Cr/N co-doped Fe₃O₄ electrocatalyst (denoted as Cr-Fe₃O₄-N/NF) is designed and prepared by a simple immersion treatment followed by a calcination method for efficient water splitting. The resultant Cr-Fe₃O₄-N/NF shows significant catalytic activity for oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) with overpotentials of 218 and 95 mV at 10 mA cm^-2. Furthermore, the water splitting system using Cr-Fe₃O₄-N/NF could afford a current density of 10 mA cm^-2 at 1.53 V, which is superior to two-electrode system composed of Pt/C and RuO₂. The high activities are attributed to the synergistic effect between Cr and N element doping. Specifically, the introduction of electron-deficient Cr is conductive to accelerate the dissociation process of water, adsorption process of intermediates, adjust the electronic structure. Simultaneously, N doping can increase the adsorption of H intermediates, provide more active sites for hydrogen absorption, and improve the electrical conductivity. This study provides a new strategy for Cr and N co-doped metal oxides electrocatalysts for high-performance water splitting.

NOx Reduction over Smart Catalysts with Self-Created Targeted Antipoisoning Sites

Selective catalytic reduction of NO_x in the presence of alkali (earth) metals and heavy metals is still a challenge due to the easy deactivation of catalysts. Herein, NO_x reduction over smart catalysts with self-created targeted antipoisoning sites is originally demonstrated. The smart catalyst consisted of TiO₂ pillared montmorillonite with abundant cation exchange sites to anchor poisoning substances and active components to catalyze NO_x into N₂. It was not deactivated during the NO_x reduction process in the presence of alkali (earth) metals and heavy metals. The enhanced surface acidity, reducible active species, and active chemisorbed oxygen species of the smart catalyst accounted for the remarkable NO_x reduction efficiency. More importantly, the self-created targeted antipoisoning sites expressed specific anchoring effects on poisoning substances and protected the active components from poisoning. It was demonstrated that the tetrahedrally coordinated aluminum species of the smart catalyst mainly acted as self-created targeted antipoisoning sites to stabilize the poisoning substances into the interlayers of montmorillonite. This work paves a new way for efficient reduction of NO_x from the complex flue gas in practical applications.

A high-density nickel-cobalt alloy embedded in nitrogen-doped carbon nanosheets for the hydrogen evolution reaction

The development of novel non-noble electrocatalysts is critical for an efficient electrochemical hydrogen evolution reaction (HER). In this study, high-density nickel-cobalt alloy nanoparticles embedded in the bent nitrogen-doped carbon nanosheets are prepared as a high-performance catalyst. The optimized Ni₇Co₃/NC-500 catalyst displays quite a low overpotential of 90 mV at a current density of 10 mA cm^-2, and a small Tafel slope of 64 mV dec^-1 in alkaline medium, and even performs better than commercial 20% Pt/C at a high current density (η₁₅₀ = 233 mV for Ni₇Co₃/NC-500 and η₁₅₀ = 267 mV for 20% Pt/C). Specifically, the high-density nickel-cobalt alloy (with an average size of 6.2 nm and a distance of <3.0 nm) embedded in the bent carbon nanosheets provides plentiful active sites. Furthermore, in situ visualization of the produced hydrogen bubbles shows that the small size of hydrogen bubbles (d = 0.2 mm for Ni₇Co₃/NC-500 vs. d = 0.8 mm for 20% Pt/C) resulting from the small water contact angle and the bent nanosheet structure would inhibit the aggregation of H₂ bubbles on the surface to facilitate efficient mass diffusion. Density functional theory calculations reveal that the formation of the nickel-cobalt alloy can effectively lower water dissociation energy barriers and optimize hydrogen adsorption Gibbs free energy, manifesting a high HER activity.

Promoting the Water-Reduction Kinetics and Alkali Tolerance of MoNi4 Nanocrystals via a Mo2 TiC2 Tx Induced Built-In Electric Field

Mo-Ni alloy-based electrocatalysts are regarded as promising candidates for the hydrogen evolution reaction (HER), despite their vulnerable stability in alkaline solution that hampers further application. Herein, Mo₂ TiC₂ T_x MXene, is employed as a support for MoNi₄ alloy nanocrystals (NCs) to fabricate a unique nanoflower-like MoNi₄ -MX_n electrocatalyst. A remarkably strong built-in electric field is established at the interface of two components, which facilitates the electron transfer from Mo₂ TiC₂ T_x to MoNi₄ . Due to the accumulation of electrons at the MoNi₄ sites, the adsorption of the catalytic intermediates and ionic species on MoNi₄ is affected consequently. As a result, the MoNi₄ -MX₁₀ nanohybrid exhibits the lowest overpotential, even lower than 10% Pt/C catalyst at the current density of 10 mA cm^-2 in 1 m KOH solution (122.19 vs 129.07 mV, respectively). Furthermore, a lower Tafel slope of 55.88 mV dec^-1 is reported as compared to that of the 10% Pt/C (65.64 mV dec^-1 ). Additionally, the MoNi₄ -MX₁₀ catalyst also displays extraordinary chemical stability in alkaline solution, with an activity loss of only 0.15% per hour over 300 h of operation. This reflects the great potential of using MXene-based interfacial engineering for the synthesis of a highly efficient and stable electrocatalyst.

The synergistic effect of Hf-O-Ru bonds and oxygen vacancies in Ru/HfO2 for enhanced hydrogen evolution

Ru nanoparticles have been demonstrated to be highly active electrocatalysts for the hydrogen evolution reaction (HER). At present, most of Ru nanoparticles-based HER electrocatalysts with high activity are supported by heteroatom-doped carbon substrates. Few metal oxides with large band gap (more than 5 eV) as the substrates of Ru nanoparticles are employed for the HER. By using large band gap metal oxides substrates, we can distinguish the contribution of Ru nanoparticles from the substrates. Here, a highly efficient Ru/HfO₂ composite is developed by tuning numbers of Ru-O-Hf bonds and oxygen vacancies, resulting in a 20-fold enhancement in mass activity over commercial Pt/C in an alkaline medium. Density functional theory (DFT) calculations reveal that strong metal-support interaction via Ru-O-Hf bonds and the oxygen vacancies in the supported Ru samples synergistically lower the energy barrier for water dissociation to improve catalytic activities.

Although ruthenium nanomaterials have proven to be effective catalysts for H₂ evolution, there is still room for activity improvements. Here, authors develop an efficient Ru/HfO₂ electrocatalyst with tuned Ru-O-Hf bonds and oxygen vacancies that shows high activities for alkaline H₂ evolution.

Microstructure Characterization and Battery Performance Comparison of MOF-235 and TiO2-P25 Materials

The growing interest in energy storage has led to the urgent need for the development of high-performance cathode electrodes. The commercialized materials MOF-235 and TiO2-P25 exhibit characteristics that may be suitable as electrodes but there are inherent challenges that have yet to be addressed in the literature. In this study, a high-pressure hydrothermal synthesized MOF-235 and sol-gel-made TiO2-P25 were tested for battery performance. The results indicate that MOF-235 does not possess the desired performance due to uncontrollable agglomeration. On the other hand, TiO2-P25 showed good cycling life, and the performance can be further optimized by doping and minimizing the particle size. Additionally, SEM and TEM were applied for surface characterization, providing evidence that mesoporous TiO2-25 inhibits photo-generated carrier recombination. The mesoporous energy storage mechanism of those two materials is also discussed. This research will provide technical support for the industrialization of those two mesoporous materials.

Porous single-crystalline vanadium nitride octahedra with a unique electrocatalytic performance

Here we grow porous single-crystalline vanadium nitride that has a good performance in the HER, showing high activity and stability.

Anion-exchange membrane water electrolyzers and fuel cells

The key components, working management, and operating techniques of anion-exchange membrane water electrolyzers and fuel cells are reviewed for the first time.

Rational design of metal oxide catalysts for electrocatalytic water splitting

Electrocatalytic energy conversion between electricity and chemical bonding energy is realized through redox reactions with multiple charge transfer steps at the electrode-electrolyte interface. The surface atomic structure of the electrode materials, if appropriately designed, will provide an energetically affordable pathway with individual reaction intermediates that not only reduce the thermodynamic energy barrier but also allow an acceptably fast kinetic rate of the overall redox reaction. As one of the most abundant and stable forms, oxides of transitional metals demonstrated promising electrocatalytic activities towards multiple important chemical reactions. In this topical review, we attempt to discuss the possible avenues to construct the electrocatalytic active surface for this important class of materials for two essential chemical reactions for water splitting. A general introduction of the electrochemical water splitting process on the electrocatalyst surface with applied potential will be provided, followed by a discussion on the fundamental charge transfers and the mechanism. As the generally perceived active sites are chemical reaction dependent, we offer a general overview of the possible approaches to construct or create electrocatalytically active sites in the context of surface atomic structure engineering. The review concludes with perspectives that summarize challenges and opportunities in electrocatalysis and how these can be addressed to unlock the electrocatalytic potentials of the metal oxide materials.

Interfacial Assembly and Applications of Functional Mesoporous Materials

Functional mesoporous materials have gained tremendous attention due to their distinctive properties and potential applications. In recent decades, the self-assembly of micelles and framework precursors into mesostructures on the liquid-solid, liquid-liquid, and gas-liquid interface has been explored in the construction of functional mesoporous materials with diverse compositions, morphologies, mesostructures, and pore sizes. Compared with the one-phase solution synthetic approach, the introduction of a two-phase interface in the synthetic system changes self-assembly behaviors between micelles and framework species, leading to the possibility for the on-demand fabrication of unique mesoporous architectures. In addition, controlling the interfacial tension is critical to manipulate the self-assembly process for precise synthesis. In particular, recent breakthroughs based on the concept of the "monomicelles" assembly mechanism are very promising and interesting for the synthesis of functional mesoporous materials with the precise control. In this review, we highlight the synthetic strategies, principles, and interface engineering at the macroscale, microscale, and nanoscale for oriented interfacial assembly of functional mesoporous materials over the past 10 years. The potential applications in various fields, including adsorption, separation, sensors, catalysis, energy storage, solar cells, and biomedicine, are discussed. Finally, we also propose the remaining challenges, possible directions, and opportunities in this field for the future outlook.

Photocatalytic reduction of CO2 into CH4 over Ru-doped TiO2: Synergy of Ru and oxygen vacancies

Photocatalytic conversion of CO₂ and H₂O into CH₄ is an intriguing approach to achieve solar energy utilization and CO₂ conversion, yet remains challenging in conversion efficiency. In this study, we present a synthesis of defected TiO₂ nanocrystal with oxygen vacancies (V_o) by a facile Ru doping-induced strategy under hydrothermal condition. The synergistic effect of Ru and oxygen vacancies contributed to the enhanced photocatalytic reduction of CO₂ toward CH₄. Oxygen vacancies and doped Ru not only can synergistically promote the separation of photogenerated carriers, but also promote the CO₂ adsorption, thus enhancing the photocatalytic activities. The optimal Ru-doped TiO₂ (denoted as 1% Ru-TiO_2-x) exhibited a remarkable enhanced photocatalytic performance with a CH₄ yield of 31.63 μmol·g^-1·h^-1, which is significantly higher than Ru-TiO₂ and TiO_2-x counterparts. This study systematically investigates the multiple roles of Ru in CO₂ reduction and provides new insights for the construction of metal oxide photocatalysts with oxygen vacancies by simple doping of metal ions.

The Study on the Active Site Regulated RuOx/Sn0.2Ti0.8O2 Catalysts with Different Ru Precursors for the Catalytic Oxidation of Dichloromethane

Chlorine-containing volatile organic compounds (CVOCs) present in industrial exhaust gas can cause great harm to the human body and the environment. In order to further study the catalytic oxidation of CVOCs, an active site regulated RuOx/Sn0.2Ti0.8O2 catalyst with different Ru precursors was developed. With Dichloromethane as the model molecule, the activity test results showed that the optimization of Ru precursor using Ru colloid significantly increased the activity of the catalyst (T90 was reduced by about 90 °C when the Ru loading was 1 wt%). The analysis of characterization results showed that the improvement of the catalytic performance was mainly due to the improvement of the active species dispersion (the size of Ru cluster was reduced from 3–4 nm to about 1.3 nm) and the enhancement of the interaction between the active species and the support. The utilization efficiency of the active components was improved by nearly doubling TOF value, and the overall oxidation performance of the catalyst was also enhanced. The relationship between the Ru loading and the catalytic activity of the catalyst was also studied to better determine the optimal Ru loading. It could be found that with the increase in Ru loading, the dispersibility of RuOx species on the catalyst surface gradually decreased, despite the increase in their total amount. The combined influence of these two effects led to little change in the catalytic activity of the catalyst at first, and then a significant increase. Therefore, this research is meaningful for the efficient treatment of CVOCs and further reducing the content of active components in the catalysts.

General fabrication of RuM (M = Ni and Co) nanoclusters for boosting hydrogen evolution reaction electrocatalysis

Rational design and fabrication of highly active electrocatalysts toward the hydrogen evolution reaction (HER) are of paramount significance in industrial hydrogen production via water electrolysis. Herein, by taking advantage of the high surface-to-volume ratio, maximized atom-utilization efficiency, and quantum size effect, we have successfully fabricated an innovative class of Ru-based alloy nanoclusters. Impressively, carbon fiber cloth (CFC) supported RuNi nanoclusters could exhibit outstanding electrocatalytic performance toward the HER, in which the optimal composition RuNi/CFC could achieve a current density of 10 mA cm^-2 with an overpotential of merely 43.0 mV in 1 M KOH electrolyte, as well as a low Tafel slope of 30.4 mF dec^-1. In addition to the high HER activity in alkaline media, such Ru-based alloy nanoclusters are also demonstrated to be highly active and stable in acidic solution. Mechanistic studies reveal that the alloying effect facilitates water dissociation and optimizes hydrogen adsorption and desorption, thereby contributing to the outstanding HER performance. This work paves a new way for the rational fabrication of advanced electrocatalysts for boosting the HER.

"Superaerophobic" NiCo bimetallic phosphides for highly efficient hydrogen evolution reaction electrocatalysts

A "superaerophobic" NiCo bimetallic phosphide electrocatalyst has been fabricated by employing bimetal-organic frameworks as self-sacrificing templates. An overpotential of only 205 mV can drive the HER current density to 800 mA cm-2, which is even superior to that for Pt/C. This study provides a promising approach for the development of industrialized HER electrocatalysts.

Anticatalytic Strategies to Suppress Water Electrolysis in Aqueous Batteries

Aqueous electrolytes are the leading candidate to meet the surging demand for safe and low-cost storage batteries. Aqueous electrolytes facilitate more sustainable battery technologies due to the attributes of being nonflammable, environmentally benign, and cost effective. Yet, water's narrow electrochemical stability window remains the primary bottleneck for the development of high-energy aqueous batteries with long cycle life and infallible safety. Water's electrolysis leads to either hydrogen evolution reaction (HER) or oxygen evolution reaction (OER), which causes a series of dire consequences, including poor Coulombic efficiency, short device longevity, and safety issues. These are often showstoppers of a new aqueous battery technology besides the low energy density. Prolific progress has been made in the understanding of HER and OER from both catalysis and battery fields. Unfortunately, a systematic review on these advances from a battery chemistry standpoint is lacking. This review provides in-depth discussions on the mechanisms of water electrolysis on electrodes, where we summarize the critical influencing factors applicable for a broad spectrum of aqueous battery systems. Recent progress and existing challenges on suppressing water electrolysis are discussed, and our perspectives on the future development of this field are provided.

New TiO2 -Based Oxide for Catalyzing Alkaline Hydrogen Evolution Reaction with Noble Metal-Like Performance

The development of cost-effective electrocatalysts with high activity and sufficient stability for hydrogen evolution reaction (HER) is crucial for the widespread application of water electrolysis for sustainable H₂ production. Transition metal oxides are desirable alternatives to replace benchmark Pt-based HER electrocatalysts because of their cost effectiveness, facile synthesis, versatile compositions, and easy electronic structure tuning. However, most available transition metal oxides show poor performance for HER catalysis. Here, it is reported that the anatase TiO₂ can be efficiently developed into a superior HER electrocatalyst with comparable activity to Pt-based electrocatalysts in alkaline solution through simultaneous morphology control, proper lattice doping, and surface active sites engineering. Specifically, the obtained cobalt-doped TiO₂ nanorod arrays (Co-TiO₂ @Ti(H₂ )) show a low overpotential of only 78 mV at 10 mA cm^-2 , a small Tafel plot of 67.8 mV dec^-1 , and excellent stability even at an ultralarge current density of ≈480 mA cm^-2 in 1.0 m KOH solution. Theoretical calculations demonstrate that the introduction of Co with rich oxygen vacancies can efficiently lower the energy barrier for water adsorption/dissociation and H intermediate desorption. This work uncovers the potential of the low-cost transition metal oxides as alternative HER electrocatalysts in alkaline water electrolysis.

Highly efficient ammonia synthesis at low temperature over a Ru-Co catalyst with dual atomically dispersed active centers

The desire for a carbon-free society and the continuously increasing demand for clean energy make it valuable to exploit green ammonia (NH3) synthesis that proceeds via the electrolysis driven Haber-Bosch (eHB) process. The key for successful operation is to develop advanced catalysts that can operate under mild conditions with efficacy. The main bottleneck of NH3 synthesis under mild conditions is the known scaling relation in which the feasibility of N2 dissociative adsorption of a catalyst is inversely related to that of the desorption of surface N-containing intermediate species, which leads to the dilemma that NH3 synthesis could not be catalyzed effectively under mild conditions. The present work offers a new strategy via introducing atomically dispersed Ru onto a single Co atom coordinated with pyrrolic N, which forms RuCo dual single-atom active sites. In this system the d-band centers of Ru and Co were both regulated to decouple the scaling relation. Detailed experimental and theoretical investigations demonstrate that the d-bands of Ru and Co both become narrow, and there is a significant overlapping of t2g and eg orbitals as well as the formation of a nearly uniform Co 3d ligand field, making the electronic structure of the Co atom resemble that of a "free-atom". The "free-Co-atom" acts as a bridge to facilitate electron transfer from pyrrolic N to surface Ru single atoms, which enables the Ru atom to donate electrons to the antibonding π* orbitals of N2, thus resulting in promoted N2 adsorption and activation. Meanwhile, H2 adsorbs dissociatively on the Co center to form a hydride, which can transfer to the Ru site to cause the hydrogenation of the activated N2 to generate N2H x (x = 1-4) intermediates. The narrow d-band centers of this RuCo catalyst facilitate desorption of surface *NH3 intermediates even at 50 °C. The cooperativity of the RuCo system decouples the sites for the activation of N2 from those for the desorption of *NH3 and *N2H x intermediates, giving rise to a favorable pathway for efficient NH3 synthesis under mild conditions.