Pt-Richcore/Sn-Richsubsurface/Ptskin Nanocubes As Highly Active and Stable Electrocatalysts for the Ethanol Oxidation Reaction

Sub-10 nm PdNi@PtNi Core-Shell Nanoalloys for Efficient Ethanol Electro-Oxidation

By controlling the structure and composition of Pt-based nanoalloys, the ethanol oxidation reaction (EOR) performances of Pt alloy catalysts can be effectively improved. Herein, we successfully synthesis sub-10 nm PdNi@PtNi nanoparticles (PdNi@PtNi NPs) with a core-shell structure by a one-pot method. The sub 10 nm core-shell nanoparticles possess more effective atoms and exhibit a synergistic effect which can lead to a shift in the d-band center and alter binding energies toward adsorbates. Due to the synergistic effect and unique core-shell structure, the PdNi@PtNi NP catalysts exhibit excellent electrocatalytic performance for ethanol oxidation reactions in alkaline, achieving 9.30 times more mass activity and 7.05 times more specific activity that of the state-of-the-art Pt/C catalysts. Moreover, the stability of PdNi@PtNi NPs was also greatly improved over PtNi nanoparticles, PtPd nanoparticles, and commercial Pt/C. This strategy provides a new idea for improving the electrocatalytic performance of Pt-based catalysts for EORs.

Design of PtSn Nanocatalysts for Fuel Cell Applications

The challenges in the fuel cell industry lie in the cost, performance, and durability of the electrode components, especially the platinum-based catalysts. Alloying has been identified as an effective strategy to reduce the cost of the catalyst and increase its efficiency and durability. So far, most studies focused on the design of PtM bimetallic nanocatalyst, where M is a transition metal. The resulting PtM materials show higher catalytic activity, but their stability remained challenging. In addition, most of the transition metals M are expensive or low abundant. Tin (Sn) has gained attention as alloying element due to its versatility in manufacturing both anode and cathode electrodes. If used as anode catalyst, it is able to overcome poisoning from CO and related intermediates. As cathode catalyst, it improves the kinetics of the oxygen reduction reaction (ORR). Additionally, Sn is an abundant and cheap element. The current contribution outlines the state of the art on the alloy and shape effect on PtSn activity and stability, demonstrating its high potential to develop cheaper, more efficient and durable catalysts for fuel-cell electrodes. Additionally, in situ analytical and spectroscopic studies can shed light on the elementary steps involved in the use of PtSn catalytic systems. Finally, this intriguing material can be used as a parent system for the synthesis of high-entropy-alloys and intermetallics materials.

Amorphous PtOx-engineered Pt@WO3 nanozymes with efficient NAD+ generation for an electrochemical cascade biosensor

Bioactive NAD+ mediated multiple biocatalytic pathways in metabolic networks. Refining the structure of NADH oxidase-like (NOX) mimics to efficiently replenish NAD+ has been promising but challenging in NAD+-dependent dehydrogenase electrochemical cascade biosensing. Herein, we discovered that PtOx structures, formed via lattice oxygen translocation from WO3 to Pt NPs at the interface, potentially activate and modulate the NOX-like functionality in Pt@WO3 nanosheets. Incorporating PtOx leads to a more positive valence of Pt species within Pt/PtOx@WO3-x, where the PtO2 species serve as preeminent reaction sites for NADH coordination, activation, and dehydrogenation. Consequently, such nanozymes display enhanced NOX-like activity towards NADH oxidation in comparison to Pt@WO3. Ultimately, the 650-Pt/PtOx@WO3-x nanozyme is employed in an electrochemical cascade biosensor for β-hydroxybutyrate (HB) detection, achieving a calculated detection limit of 25 μM. This study offers insights into PtOx activation in Pt-based NOX mimics and supports the future development of NAD+/NADH-dependent electrochemical biosensors.

Ultrathin PdPtP nanodendrites as high-activity electrocatalysts toward alcohol oxidation

PdPtP nanodendrites were prepared by a post-phosphating method. Due to their well-designed structure and composition, the EOR activity of the PtPdP NDs is significantly increased to 14.3 A mgPd+Pt-1, which is a significant improvement compared to commercial Pd/C catalysts. In addition, stability tests demonstrated their excellent catalytic activity and structural durability.

Overcoming the Electrode Challenges of High-Temperature Proton Exchange Membrane Fuel Cells

Proton exchange membrane fuel cells (PEMFCs) are becoming a major part of a greener and more sustainable future. However, the costs of high-purity hydrogen and noble metal catalysts alongside the complexity of the PEMFC system severely hamper their commercialization. Operating PEMFCs at high temperatures (HT-PEMFCs, above 120 °C) brings several advantages, such as increased tolerance to contaminants, more affordable catalysts, and operations without liquid water, hence considerably simplifying the system. While recent progresses in proton exchange membranes for HT-PEMFCs have made this technology more viable, the HT-PEMFC viscous acid electrolyte lowers the active site utilization by unevenly diffusing into the catalyst layer while it acutely poisons the catalytic sites. In recent years, the synthesis of platinum group metal (PGM) and PGM-free catalysts with higher acid tolerance and phosphate-promoted oxygen reduction reaction, in conjunction with the design of catalyst layers with improved acid distribution and more triple-phase boundaries, has provided great opportunities for more efficient HT-PEMFCs. The progress in these two interconnected fields is reviewed here, with recommendations for the most promising routes worthy of further investigation. Using these approaches, the performance and durability of HT-PEMFCs will be significantly improved.

Intermetallic Nanocrystals for Fuel-Cells-Based Electrocatalysis

Electrocatalysis underpins the renewable electrochemical conversions for sustainability, which further replies on metallic nanocrystals as vital electrocatalysts. Intermetallic nanocrystals have been known to show distinct properties compared to their disordered counterparts, and been long explored for functional improvements. Tremendous progresses have been made in the past few years, with notable trend of more precise engineering down to an atomic level and the investigation transferring into more practical membrane electrode assembly (MEA), which motivates this timely review. After addressing the basic thermodynamic and kinetic fundamentals, we discuss classic and latest synthetic strategies that enable not only the formation of intermetallic phase but also the rational control of other catalysis-determinant structural parameters, such as size and morphology. We also demonstrate the emerging intermetallic nanomaterials for potentially further advancement in energy electrocatalysis. Then, we discuss the state-of-the-art characterizations and representative intermetallic electrocatalysts with emphasis on oxygen reduction reaction evaluated in a MEA setup. We summarize this review by laying out existing challenges and offering perspective on future research directions toward practicing intermetallic electrocatalysts for energy conversions.

Optimizing Pt-Based Alloy Electrocatalysts for Improved Hydrogen Evolution Performance in Alkaline Electrolytes: A Comprehensive Review

The splitting of water through electrocatalysis offers a sustainable method for the production of hydrogen. In alkaline electrolytes, the lack of protons forces water dissociation to occur before the hydrogen evolution reaction (HER). While pure Pt is the gold standard electrocatalyst in acidic electrolytes, since the 5d orbital in Pt is nearly fully occupied, when it overlaps with the molecular orbital of water, it generates a Pauli repulsion. As a result, the formation of a Pt-H* bond in an alkaline environment is difficult, which slows the HER and negates the benefits of using a pure Pt catalyst. To overcome this limitation, Pt can be alloyed with transition metals, such as Fe, Co, and Ni. This approach has the potential not only to enhance the performance but also to increase the Pt dispersion and decrease its usage, thus overall improving the catalyst's cost-effectiveness. The excellent water adsorption and dissociation ability of transition metals contributes to the generation of a proton-rich local environment near the Pt-based alloy that promotes HER. Significant progress has been achieved in comprehending the alkaline HER mechanism through the manipulation of the structure and composition of electrocatalysts based on the Pt alloy. The objective of this review is to analyze and condense the latest developments in the production of Pt-based alloy electrocatalysts for alkaline HER. It focuses on the modified performance of Pt-based alloys and clarifies the design principles and catalytic mechanism of the catalysts from both an experimental and theoretical perspective. This review also highlights some of the difficulties encountered during the HER and the opportunities for increasing the HER performance. Finally, guidance for the development of more efficient Pt-based alloy electrocatalysts is provided.

Neighboring Platinum Atomic Sites Activate Platinum-Cobalt Nanoclusters as High-Performance ORR/OER/HER Electrocatalysts

The rational design of efficient and multifunctional electrocatalysts for energy conversion devices is one of the major challenges for clean and renewable energy transition. Herein, the local electronic structure of cobalt-platinum nanoclusters is regulated by adjacent platinum atomic site encapsulated in N-doped hollow carbon nanotubes (PtSA -PtCo NCs/N-CNTs) by pyrolysis of melamine-orientation-induced zeolite imidazole metal-organic frameworks (ZIF-67) with thimbleful platinum doping. The introduction of melamine can reactivate adjacent carbon atoms and initiate the oriented growth of nitrogen-doped carbon nanotubes. The systematic analysis suggests the significant role of thimbleful neighboring low-coordinated Pt─N2 in altering the localized electronic structure of PtCo nanoclusters. The optimized PtSA -PtCo NCs/N-CNTs-900 exhibit excellent hydrogen evolution reaction (HER)/oxygen evolution reaction (OER)/oxygen reduction reaction (ORR)/ catalytic performance reaching the current density of 10 mA cm-2 in 1 m KOH under the low 47 (HER) and 252 mV (OER) overpotentials, and a high half-wave potential of 0.86 and 0.89 V (ORR) in 0.1 m KOH and 0.1 m HClO4 , respectively. Remarkably, the PtSA -PtCo NC/N-CNT-900 also presents outstanding catalytic performances toward water splitting and rechargeable Zn-air batteries. The theoretical calculations reveal that optimal regulation of the electronic structure of PtCo nanoclusters by thimbleful neighboring Pt atomic reduces the reaction energy barrier in electrochemical process, facilitating the ORR/OER/HER performance.

Seeded Synthesis of Hollow PdSn Intermetallic Nanomaterials for Highly Efficient Electrocatalytic Glycerol Oxidation

Intermetallic nanomaterials have shown promising potential as high-performance catalysts in various catalytic reactions due to their unconventional crystal phases with ordered atomic arrangements. However, controlled synthesis of intermetallic nanomaterials with tunable crystal phases and unique hollow morphologies remains a challenge. Here, a seeded method is developed to synthesize hollow PdSn intermetallic nanoparticles (NPs) with two different intermetallic phases, that is, orthorhombic Pd2 Sn and monoclinic Pd3 Sn2 . Benefiting from the rational regulation of the crystal phase and morphology, the obtained hollow orthorhombic Pd2 Sn NPs deliver excellent electrocatalytic performance toward glycerol oxidation reaction (GOR), outperforming solid orthorhombic Pd2 Sn NPs, hollow monoclinic Pd3 Sn2 NPs, and commercial Pd/C, which places it among the best reported Pd-based GOR electrocatalysts. The reaction mechanism of GOR using the hollow orthorhombic Pd2 Sn as the catalyst is investigated by operando infrared reflection absorption spectroscopy, which reveals that the hollow orthorhombic Pd2 Sn catalyst cleaves the CC bond more easily compared to the commercial Pd/C. This work can pave an appealing route to the controlled synthesis of diverse novel intermetallic nanomaterials with hollow morphology for various promising applications.

Sulfur and phosphorus co-doping optimized electronic structure and modulated intermediate affinity on PdSP metallene for ethanol-assisted energy-saving H2 production

Coupling cathodic hydrogen evolution reaction (HER) and anodic electrochemical oxidation of organic small molecules in a co-electrolysis system could simultaneously realize high-value chemical generation and energy-saving hydrogen production, which, however, require high-performance electrocatalysts. In this work, we developed a one-step solvothermal method to synthesize S, P-co-doped Pd metallene (PdSP metallene) and employed it as a bifunctional electrocatalyst for both the HER and ethanol oxidation reaction (EOR). The co-doping of S and P atoms into Pd metallene could introduce multiple active sites and increase the electrochemically-active surface area. Moreover, the electronic interactions between Pd, S, and P atoms could regulate the electronic structure of the active sites and modulate the intermediate affinity on the resultant PdSP metallene, thus boosting the electrocatalytic HER and EOR performance. In the HER-EOR co-electrolysis system with bifunctional PdSP metallene electrocatalysts, only a 0.88 V of electrolysis voltage was required to fulfill 10 mA cm^-2 current density, much lower than that of pure water electrolysis (1.41 V) using the same electrocatalysts.

Leveraging Pd(100)/SnO2 interfaces for highly efficient electrochemical formic acid oxidation

The electrocatalytic formic acid oxidation (FAO) is the crucial anodic reaction of direct formic acid fuel cells (DFAFCs), but its activity remains to be largely improved in order to be practically viable. The rational development of enhanced catalysts requires thorough consideration of various contributing factors that are possibly integrated in composite systems. Here, we demonstrate that, Pd(100)/SnO₂ interfaces, provided being efficiently exploited, can significantly boost FAO activity by a factor of ∼10, compared with pure Pd(100) facets, with the mass activity reaching a record of 14.55 A mg_Pd^-1 at a 40 mV-lower peak potential. Unique Pd/SnO₂ nanocomposites with a myriad of Pd(100)/SnO₂ interfaces were obtained by a newly developed successive seeded growth strategy, wherein pre-formed SnO₂ nanospheres are used as seeds for two-round overgrowth of multitudinous Pd nanocubes. Using electron microscopic, electrochemical, spectroscopic and computational analyses, we found that the Pd(100)/SnO₂ interfaces induce lattice contraction and electron loss on Pd nanocubes, which optimize intermediate binding during FAO. Moreover, we showed that the good cubicity of the Pd nanocubes and the presence of SnO₂ nearby further promote the activity by facilitating the potential-determining step and the elimination of the poisoning CO intermediate, respectively. As such, the combined high intrinsic activity and number density of Pd(100)/SnO₂ interfaces enabled the superior activity of the Pd/SnO₂ nanocomposites. The composite material presented here holds promise for application in DFAFCs, but equally importantly, the insights regarding the structure-performance relationship would be beneficial for designing efficient metal/oxide composite catalysts for diverse electro- and photo-catalytic reactions.

Pulse Electrolysis Technique for Preparation of Bimetal Tin-Containing Electrocatalytic Materials

Platinum–tin-containing materials are the most popular catalysts for processes occurring in fuel cells with direct ethanol oxidation. Pulse electrolysis based on the electrochemical dispersion of platinum electrodes under the influence of alternating pulse current in an alkaline electrolyte made it possible to introduce the tin component into the catalyst in the form of a dopant, an alloy with platinum, and in the form of an oxide phase and evaluate the effect of the form in which tin is present in the catalyst on its microstructural and electrocatalytic characteristics. The introduction of tin into the catalyst generally increases the rate of ethanol electrooxidation; however, with the most prominent effect observed when tin is present in form of an oxide.

CO2 and Formate Pathway of Methanol Electrooxidation at Rhodium Electrodes in Alkaline Media: An In Situ Electrochemical Attenuated Total Refection Surface-Enhanced Infrared Absorption Spectroscopy and Infrared Reflection Absorption Spectroscopy Investigation

Rh catalysts exhibit unexpected high activity for the methanol oxidation reaction (MOR) in alkaline conditions, making them potential anodic catalysts for direct methanol fuel cells (DMFCs). Nevertheless, the MOR mechanism on Rh electrodes has not been clarified thus far, which impedes the development of high-efficiency Rh-based MOR catalysts. To investigate it, a combination of in situ electrochemical techniques called attenuated total refection surface-enhanced infrared absorption spectroscopy (ATR-SEIRAS) and infrared reflection absorption spectroscopy (IRAS) is used. Cyclic voltammograms of MOR at Rh electrodes show considerable activity in alkaline media rather than acidic media, although the real-time ATR-SEIRA spectral results demonstrate that methanol can rarely self-decompose on Rh at open-circuit conditions. Meanwhile, in combination of ATR-SEIRAS and IRAS results, CO₂ and formate are thought to be MOR products, suggesting a dual-pathway mechanism ("CO₂ pathway" and "formate pathway"). Specifically, CO_ad species, which are the major intermediates in the CO₂ pathway, can produce at lower potentials and be oxidized into CO₂ at a potential of 0.5-0.75 V. Concurrently, the formate can be produced from 0.5 V and diffuse into the bulk electrolyte to become one of the MOR products, while the further electrochemical conversion of formate to CO₂ is essentially negligible. More directly, the apparent selectivity (r) of the CO₂ pathway is estimated to reach ca. 0.63 at 0.9 V, confirming the potential-dependent selectivity of MOR at Rh surfaces. This study might provide fresh insights into the design and fabrication of effective Rh-based catalysts for MOR.

Tailoring Amorphous PdCu Nanostructures for Efficient C-C Cleavage in Ethanol Electrooxidation

The large-scale application of direct ethanol fuel cells has long been obstructed by the sluggish ethanol oxidation reaction at the anode. Current wisdom for designing and fabricating EOR electrocatalysts has been focused on crystalline materials, which result in only limited improvement in catalytic efficiency. Here, we report the amorphous PdCu (a-PdCu) nanomaterials as superior EOR electrocatalysts. The amorphization of PdCu catalysts can significantly facilitate the C-C bond cleavage, which thereby affords a C1 path faradic efficiency as high as 69.6%. Further tailoring the size and shape of a-PdCu nanocatalysts through the delicate kinetic control can result in a maximized mass activity up to 15.25 A/mg_Pd, outperforming most reported catalysts. Notably, accelerated durability tests indicate that both the isotropic structure and one-dimensional shape can dramatically enhance the catalytic durability of the catalysts. This work provides valuable guidance for the rational design and fabrication of amorphous noble metal-based electrocatalysts for fuel cells.

Quaternary PdCuNiP Porous Nanosheets with Enhanced Electrochemical Performance in the Ethanol Oxidation Reaction

The ability to manipulate metal electrocatalysts with satisfactory performance for the ethanol oxidation reaction (EOR) is promising but still unsatisfactory for practical application in direct ethanol fuel cells. Beyond traditional metal-metal alloys, we herein report a novel metal-nonmetal alloy electrocatalyst that takes advantage of quaternary PdCuNiP alloy composition and the ultrathin/porous nanosheet (NS) structure. The optimized PdCuNiP porous NSs feature more undercoordinated active sites and modified electron/function structures, enabling better antipoisoning ability. Under alkaline conditions, this electrocatalyst shows excellent electrochemical EOR performance with a high EOR activity of 4.05 A mg_Pd^-1 and a low activation energy of 21.2 kJ mol^-1, comparable to the state-of-the-art electrocatalysts reported in the literature. Meanwhile, PdCuNiP porous NSs are electrocatalytically active for electrochemical oxidation of other fuels (methanol, glycerol, and glucose), highlighting their great potential for various direct alcohol fuel cells. The findings reported here may put forward some insights into designing new functional electrocatalysts for various fuel cell electrocatalysis and beyond.

Pt-Sn alloy shells with tunable composition and structure on Au nanoparticles for boosting ethanol oxidation

Combining the core-shell structure with the optimization of surface composition and structure in the shell is a fantastic strategy to enhance the electrocatalytic performances. Here, we synthesized trimetallic Au@Pt_xSn_y core-shell nanoparticles (NPs) with tunable composition and structure of Pt-Sn alloyed shells. Impressively, the Au@PtSn core-shell NPs with hexagonal PtSn alloyed shells exhibited the highest mass activity and specific activity toward ethanol oxidation reaction (EOR) in alkaline electrolyte, which are 13.0 and 12.7 times higher than those of the commercial Pt/C. In addition, the Au@PtSn core-shell NPs displayed the best stability compared to commercial Pt/C, with only 44.8% loss vs. 86.8% loss in mass activity after 1,000 s due to the stronger anti-poisoning ability for reaction intermediates. The theory calculations reveal that the introduction of Au core and alloying Pt with Sn both endow Pt with an appropriate d-band center, and thus effectively boosting the EOR activity.

One Stone Two Birds: Unlocking the Synergy between Amorphous Ni(OH)2 and Pd Nanocrystals toward Ethanol and Formic Acid Oxidation

Even though extensive efforts have been devoted to mixing Pd nanocrystals with Ni(OH)₂ for the enhanced synergy, it remains a great challenge to incorporate nanosized Ni(OH)₂ species on the Pd electrode and reveal their synergy. Herein, we present spongelike Pd nanocrystals with the modification of amorphous Ni(OH)₂ species. The catalyst configuration is first considered by compositing Pd with Ni(OH)₂ species to optimize the Pd-Pd interatomic distance and then constructing a strongly coupled interface between Pd nanostructures and Ni(OH)₂ species. For the ethanol oxidation reaction (EOR) and the formic acid oxidation reaction (FAOR), Pd-Ni(OH)₂ composites exhibit an impressive mass activity of 4.98 and 2.65 A mg_Pd^-1, respectively. Most impressively, there is no significant decrease in the EOR activity during five consecutive cycles (50 000 s). A series of CO-poisoning tests have proved that the enhanced EOR and FAOR performances involve synergy between Pd nanostructures and Ni(OH)₂ species.

Highly Curved, Quasi-Single-Crystalline Mesoporous Metal Nanoplates Promote CC Bond Cleavage in Ethanol Oxidation Electrocatalysis

The ability to manipulate metal nanocrystals with well-defined morphologies and structures is greatly important in material chemistry, catalysis chemistry, nanoscience, and nanotechnology. Although 2D metals serve as interesting platforms, further manipulating them in solution with highly penetrated mesopores and ideal crystallinity remains a huge challenge. Here, an easy yet powerful synthesis strategy for manipulating the mesoporous structure and crystallinity of 2D metals in a controlled manner with cetyltrimethylammonium chloride as the mesopore-forming surfactant and extra iodine-ion as the structure/facet-selective agent is reported. This strategy allows for preparing an unprecedented type of 2D quasi-single-crystalline mesoporous nanoplates (SMPs) with highly curved morphology and controlled metal composition. The products, for example, PdCu SMPs, feature abundant undercoordinated sites, optimized electronic structures, excellent electron/mass transfers, and confined mesopore environments. Curved PdCu SMPs exhibit remarkable electrocatalytic activity of 6.09 A mg_Pd ^-1 and stability for ethanol oxidation reaction (EOR) compared with its counterpart catalysts and commercial Pd/C. More importantly, PdCu SMPs are highly selective for EOR electrocatalysis that dramatically promotes C-C bond cleavage with a superior C1 pathway selectivity as high as 72.1%.

Branch-Regulated Palladium-Antimony Nanoparticles Boost Ethanol Electro-oxidation to Acetate

Tuning the composition and morphology of bimetallic nanoparticles (NPs) offers an effective strategy to improve their electrocatalytic performance. In this work, we present a facile wet-chemistry procedure to engineer PdSb NPs with controlled morphology. Spherical or branched NPs are produced by tuning the heterogeneous nucleation of Sb on Pd seeds. Compared with pure Pd NPs, the incorporation of Sb not only decreases the amount of Pd used but also results in a significant increase of activity and stability for the electrocatalytic ethanol oxidation reaction (EOR). Best performances are obtained with highly branched PdSb NPs, which deliver a specific activity of 109 mA cm^-2 and a mass activity of up to 2.42 A mg_Pd^-1, well above that of a commercial Pd/C catalyst and branched Pd NPs. Moreover, PdSb displays significant stability enhancement of over 10 h for the EOR measurements. Density functional theory calculations reveal that the improved performance of PdSb NPs is related to the role played by Sb in reducing the energy barrier of the EOR rate-limiting step. Interestingly, as a side and value-added product of the EOR, acetate is obtained with 100% selectivity on PdSb catalysts.

Insights into reaction mechanisms of ethanol electrooxidation at the Pt/Au(111) interfaces using density functional theory

Understanding ethanol electrooxidation reaction kinetics is fundamental to the development of direct ethanol fuel cells.

Controllable Synthesis of Platinum-Tin Intermetallic Nanoparticles with High Electrocatalytic Performance for Ethanol Oxidation

This article proposes a general approach for the preparation of intermetallic nanoparticles of Pt3Sn, PtSn, PtSn2, and PtSn4, triggered by hexamethyldisilazane (HMDS) in conjunction with SnCl2. The ethanol oxidation reaction...

Pd17Se15 alloy on Se sphere with high anti-poisoning ability for alcohol fuel electrooxidation

Electron-deficient effect of Pd in the Pd17Se15 catalyst effectively weakens the adsorption of CO poisoning species and enhances the electrocatalytic performance of alcohol electrooxidation in an alkaline medium.

Platinum-Tin/Tin Oxide/CNT Catalysts for High-Performance Electrocatalytic Ethanol Oxidation

Ethanol is a promising liquid clean energy source in the energy conversion field. However, the self-poisoning caused by the strongly adsorbed reaction intermediates (typically, CO) is a critical problem in ethanol oxidation reaction. To address this issue, we proposed a joint use of two strategies, alloying of Pt with other metals and building Pt/metal-oxide interfaces, to achieve high-performance electrocatalytic ethanol oxidation. For this, a well-designed synthetic route combining wet impregnation with a two-step thermal treatment process was established to construct PtSn/SnO_x interfaces on carbon nanotubes. Using this route, the alloying of Pt-Sn and formation of PtSn-SnO_x interfaces can simultaneously be achieved, and the coverage of SnO_x thin films on PtSn alloy nanoparticles can be facilely tuned by the strong interaction between Pt and SnO_x . The results revealed that the partial coverage of SnO_x species not only retained the active sites, but also enhanced the CO anti-poisoning ability of the catalyst. Consequently, the H-PtSn/SnO_x /CNT-2 catalyst with an optimized PtSn-SnO_x interface showed significantly improved performances toward the ethanol oxidation reaction (825 mA mg_Pt ^-1 ). This study provides deep insights into the structure-performance relationship of PtSn/metal oxide composite catalysts, which would be helpful for the future design and fabrication of high-performance Pt-based ethanol oxidation reaction catalysts.

Construction of Lattice Strain in Bimetallic Nanostructures and Its Effectiveness in Electrochemical Applications

Bimetallic nanocrystals (NCs), associated with various surface functions such as ligand effect, ensemble effect, and strain effect, exhibit superior electrocatalytic properties. The stress-induced surface strain effect can alter binding strength between the surface active sites and reactants as well as their intermediates, and the electrochemical performance of bimetallic NCs can be significantly facilitated by the lattice-strain modification via their morphologies, sizes, shell-thickness, surface defectiveness as well as compositions. In this review, an overview of fundamental principles, characterization techniques, and quantitative determination of the surface lattice strain is provided. Various strategies and synthesis efforts on creating lattice-strain-engineered bimetallic NCs, including the de-alloying process, atomic layer-by-layer deposition, thermal treatment evolution, one-pot synthesis, and other efforts are also discussed. It is further outlined how the lattice strain effect promotes electrochemical catalysis through the selected case studies. The reactions on oxygen reduction reaction, small molecular oxidation, water splitting reaction, and electrochemical carbon dioxide reduction reactions are focused. In particular, studies of lattice strain arisen from core-shell nanostructure and defectiveness are highlighted. Lastly, the potential challenges are summarized and the prospects of lattice-strain-based engineering on bimetallic nanocatalysts with suggestion and guidance of the future electrocatalyst design are envisioned.

One-Pot Synthesis of Ternary Alloy Hollow Nanostructures with Controlled Morphologies for Electrocatalysis

The rational design and synthesis of multimetallic hollow nanostructures (HNSs) have been attracting great attention due to their structural and compositional advantages for application in electrocatalysis. Herein, the one-pot synthesis of Pd-Pt-Ag ternary alloy HNSs with controllable morphologies through a self-templating approach without any pre-synthesized templates is reported. Simultaneous reduction of multiple metal precursors by ascorbic acid in the presence of cetyltrimethylammonium chloride (CTAC) yielded initially metastable Pd-Ag nanocrystals, which can act as a self-template, and subsequent galvanic replacement and reduction led to the formation of final Pd-Pt-Ag HNSs. The size and hollowness (the ratio of inner cavity diameter to outer diameter) of the HNSs could be tuned through control over the concentration of CTAC. This can be attributed to the manipulated reduction kinetics of multiple metal precursors with the change in the CTAC concentration. The prepared Pd-Pt-Ag HNSs exhibited improved catalytic performance for ethanol electro-oxidation due to their large active surface areas and ternary alloy composition.

Progress in the development of heteroatom-doped nickel phosphates for electrocatalytic water splitting

Hydrogen energy is expected to replace fossil fuels as a mainstream energy source in the future. Currently, hydrogen production via water electrolysis yields high hydrogen purity with easy operation and without producing polluting side products. Presently, platinum group metals and their oxides are the most effective catalysts for water splitting; however, their low abundance and high cost hinder large-scale hydrogen production, especially in alkaline and neutral media. Therefore, the development of high-efficiency, durable, and low-cost electrocatalysts is crucial to improving the overpotential and lowering the electrical energy consumption. As a solution, Ni₂P has attracted particular attention, owing to its desirable electrical conductivity, high corrosion resistance, and remarkable catalytic activity for overall water splitting, and thus, is a promising substitute for platinum-group catalysts. However, the catalytic performance and durability of raw Ni₂P are still inferior to those of noble metal-based catalysts. Heteroatom doping is a universal strategy for enhancing the performance of Ni₂P for water electrolysis over a wide pH range, because the electronic structure and crystal structure of the catalyst can be modulated, and the adsorption energy of the reaction intermediates can be adjusted via doping, thus optimizing the reaction performance. In this review, first, the reaction mechanisms of water electrolysis, including the cathodic hydrogen evolution reaction and anodic oxygen evolution reaction, are briefly introduced. Then, progress into heteroatom-doped nickel phosphide research in recent years is assessed, and a discussion of each representative work is given. Finally, the opportunities and challenges for developing advanced Ni₂P based electrocatalysts are proposed and discussed.

Solvent-Mediated Shell Dimension Reconstruction of Core@Shell PdAu@Pd Nanocrystals for Robust C1 and C2 Alcohol Electrocatalysis

The core@shell structure dimension of the Pd-based nanocrystals deeply impacts their catalytic properties for C1 and C2 alcohol oxidation reactions. However, the precise simultaneous control on the synthesis of core@shell nanocrystals with different shell dimensions is difficult, and most synthesis on Pd-based core@shell nanocatalysts involves the surfactants participation by multiple steps, thus leads to limited catalytic properties. Herein, for the first time, a facile one-step surfactant-free strategy is developed for shell dimension reconstruction of PdAu@Pd core@shell nanocrystals by altering volume ratios of mixed solvents. The Pd-based sunflower-like (SL) and coral grass-like (CGL) nanocrystals are obtained with different 2D hexagonal nanosheet assembles and 3D network shells, respectively. Benefitting from the clean surface shell of 2D ultrathin nanosheets structure, high atom utilization efficiency, and robust electronic effect. The PdAu@Pd SL achieves the ascendant methanol/ethanol/ethylene glycol oxidation reaction (MOR/EOR/EGOR) activities, much higher than Pd/C catalysts, as well as the improved antipoisoning ability. Notably, this one-step construction shell dimension of PdAu@Pd core@shell catalysts not only provide a significant reference for the improvement of surfactant-free synthetic routes, but also shed light on the advanced engineering on shell dimensions in core@shell nanostructures for electrocatalysis and so forth.

Highly Porous Pt2Ir Alloy Nanocrystals as a Superior Catalyst with High-Efficiency C-C Bond Cleavage for Ethanol Electrooxidation

Achieving high catalytic performance with high CO₂ selectivity is critical for commercialization of direct ethanol fuel cells. Here, we report carbon-supported highly porous Pt₂Ir alloy nanocrystals (p-Pt₂Ir/C) for an ethanol oxidation reaction (EOR) that displays nearly 7.2-fold enhancement in mass activity and promotes antipoisoning ability and durability for the EOR as compared with the commercial Pt/C-JM. Moreover, the catalyst exhibits high CO₂ selectivity, 3.4-fold at 0.65 V (vs. SCE) and 4.1-fold at 0.75 V (vs. SCE) higher as compared with the carbon-supported porous Pt nanocrystals (p-Pt/C). The highly porous structure is composed of interconnected one-dimensional (1D) rough branches with an average diameter of only 1.9 nm, largely promoting Pt utilization efficiency and accelerating mass transfer. The 1D rough branch surface exposed many atomic steps/corners endowed with abundant high activity sites. Alloying with Ir can significantly improve the antipoisoning ability, durability, and C-C bond cleavage ability, thereby evidently enhancing its EOR performance.

Atomic Structural Evolution of Single-Layer Pt Clusters as Efficient Electrocatalysts

The rational synthesis of single-layer noble metal directly anchored on support materials is an elusive target to accomplish for a long time. This paper reports well-defined single-layer Pt (Pt-SL) clusters anchored on ultrathin TiO₂ nanosheets-as a new frontier in electrocatalysis. The structural evolution of Pt-SL/TiO₂ via self-assembly of single Pt atoms (Pt-SA) is systematically recorded. Significantly, the Pt atoms of Pt-SL/TiO₂ possess a unique electronic configuration with PtPt covalent bonds surrounded by abundant unpaired electrons. This Pt-SL/TiO₂ catalyst presents enhanced electrochemical performance toward diverse electrocatalytic reactions (such as the hydrogen evolution reaction and the oxygen reduction reaction) compared with Pt-SA, multilayer Pt nanoclusters, and Pt nanoparticles, suggesting an efficient new type of catalyst that can be achieved by constructing single-layer atomic clusters on supports.

Periodic nanostructures: preparation, properties and applications

Periodic nanostructures, a group of nanomaterials consisting of single or multiple nano units/components periodically arranged into ordered patterns (e.g., vertical and lateral superlattices), have attracted tremendous attention in recent years due to their extraordinary physical and chemical properties that offer a huge potential for a multitude of applications in energy conversion, electronic and optoelectronic applications. Recent advances in the preparation strategies of periodic nanostructures, including self-assembly, epitaxy, and exfoliation, have paved the way to rationally modulate their ferroelectricity, superconductivity, band gap and many other physical and chemical properties. For example, the recent discovery of superconductivity observed in "magic-angle" graphene superlattices has sparked intensive studies in new ways, creating superlattices in twisted 2D materials. Recent development in the various state-of-the-art preparations of periodic nanostructures has created many new ideas and findings, warranting a timely review. In this review, we discuss the current advances of periodic nanostructures, including their preparation strategies, property modulations and various applications.

Effect of Anode Material on Electrochemical Oxidation of Low Molecular Weight Alcohols-A Review

The growing climate crisis inspires one of the greatest challenges of the 21st century-developing novel power sources. One of the concepts that offer clean, non-fossil electricity production is fuel cells, especially when the role of fuel is played by simple organic molecules, such as low molecular weight alcohols. The greatest drawback of this technology is the lack of electrocatalytic materials that would enhance reaction kinetics and good stability under process conditions. Currently, electrodes for direct alcohol fuel cells (DAFCs) are mainly based on platinum, which not only provides a poor reaction rate but also readily deactivates because of poisoning by reaction products. Because of these disadvantages, many researchers have focused on developing novel electrode materials with electrocatalytic properties towards the oxidation of simple alcohols, such as methanol, ethanol, ethylene glycol or propanol. This paper presents the development of electrode materials and addresses future challenges that still need to be overcome before direct alcohol fuel cells can be commercialized.

Platinum-Based Electrocatalysts for Direct Alcohol Fuel Cells: Enhanced Performances toward Alcohol Oxidation Reactions

In the past few decades, Pt-based electrocatalysts have attracted great interests due to their high catalytic performances toward the direct alcohol fuel cell (DAFC). However, the high cost, poor stability, and the scarcity of Pt have markedly hindered their large-scale utilization in commerce. Therefore, enhancing the activity and durability of Pt-based electrocatalysts, reducing the Pt amount and thus the cost of DAFC have become the keys for their practical applications. In this minireview, we summarized some basic concepts to evaluate the catalytic performances in electrocatalytic alcohol oxidation reaction (AOR) including electrochemical active surface area, activity and stability, the effective approaches for boosting the catalytic AOR performance involving size decrease, structure and morphology modulation, composition effect, catalyst supports, and assistance under other external energies. Furthermore, we also presented the remaining challenges of the Pt-based electrocatalysts to achieve the fabrication of a real DAFC.

Engineering the Near-Surface of PtRu3 Nanoparticles to Improve Hydrogen Oxidation Activity in Alkaline Electrolyte

Tailoring the near-surface composition of Pt-based alloy can optimize the surface chemical properties of a nanocatalyst and further improve the sluggish H₂ electrooxidation performance in an alkaline electrolyte. However, the construction of alloy nanomaterials with a precise near-surface composition and smaller particle size still needs to overcome huge obstacles. Herein, ultra-small PtRu₃ binary nanoparticles (<2 nm) evenly distributed on porous carbon (PtRu₃ /PC), with different near-surface atomic compositions (Pt-increased and Ru-increased), are successfully synthesized. XPS characterizations and electrochemical test confirm the transformation of a near-surface atomic composition after annealing PtRu₃ /PC-300 alloy; when annealing in CO atmosphere, forming the Pt-increased near-surface structure (500 °C), while the Ru-increased near-surface structure appears in an Ar heat treatment process (700 °C). Furthermore, three PtRu₃ /PC nanocatalysts all weaken the hydrogen binding strength relative to the Pt/PC. Remarkably, the Ru-increased nanocatalyst exhibits up to 38.8-fold and 9.2-fold HOR improvement in mass activity and exchange current density, compared with the Pt/PC counterpart, respectively. CO-stripping voltammetry tests demonstrate the anti-CO poisoning ability of nanocatalysts, in the sequence of Ru-increased ≥ PtRu₃ /PC-300 > Pt-increased > Pt/PC. From the perspective of engineering a near-surface structure, this study may open up a new route for the development of high-efficiency electrocatalysts with a strong electronic effect and oxophilic effect.

Enhanced Formic Acid Oxidation over SnO2-decorated Pd Nanocubes

The formic acid oxidation reaction (FAOR) is one of the key reactions that can be used at the anode of low-temperature liquid fuel cells. To allow the knowledge-driven development of improved catalysts, it is necessary to deeply understand the fundamental aspects of the FAOR, which can be ideally achieved by investigating highly active model catalysts. Here, we studied SnO₂-decorated Pd nanocubes (NCs) exhibiting excellent electrocatalytic performance for formic acid oxidation in acidic medium with a SnO₂ promotion that boosts the catalytic activity by a factor of 5.8, compared to pure Pd NCs, exhibiting values of 2.46 A mg^-1 _Pd for SnO₂@Pd NCs versus 0.42 A mg^-1 _Pd for the Pd NCs and a 100 mV lower peak potential. By using ex situ, quasi in situ, and operando spectroscopic and microscopic methods (namely, transmission electron microscopy, X-ray photoelectron spectroscopy, and X-ray absorption fine-structure spectroscopy), we identified that the initially well-defined SnO₂-decorated Pd nanocubes maintain their structure and composition throughout FAOR. In situ Fourier-transformed infrared spectroscopy revealed a weaker CO adsorption site in the case of the SnO₂-decorated Pd NCs, compared to the monometallic Pd NCs, enabling a bifunctional reaction mechanism. Therein, SnO₂ provides oxygen species to the Pd surface at low overpotentials, promoting the oxidation of the poisoning CO intermediate and, thus, improving the catalytic performance of Pd. Our SnO _x -decorated Pd nanocubes allowed deeper insight into the mechanism of FAOR and hold promise for possible applications in direct formic acid fuel cells.

Tailored electrocatalysts by controlled electrochemical deposition and surface nanostructuring

Controlled electrodeposition and surface nanostructuring are very promising approaches to tailor the structure of the electrocatalyst surface, with the aim to enhance their efficiency for sustainable energy conversion reactions. In this highlight, we first summarise different strategies to modify the structure of the electrode surface at the atomic and sub-monolayer level for applications in electrocatalysis. We discuss aspects such as structure sensitivity and electronic and geometric effects in electrocatalysis. Nanostructured surfaces are finally introduced as more scalable electrocatalysts, where morphology, cluster size, shape and distribution play an essential role and can be finely tuned. Controlled electrochemical deposition and selective engineering of the surface structure are key to design more active, selective and stable electrocatalysts towards a decarbonised energy scheme.

Random alloy and intermetallic nanocatalysts in fuel cell reactions

Fuel cells that use small organic molecules or hydrogen as the anode fuel can power clean electric vehicles. From an experimental perspective, the possible fuel cells' electrocatalytic reaction mechanisms are obtained through in situ electrochemical spectroscopy techniques and density functional theory calculations, providing theoretical guidance for further development of novel nanocatalysts. As advanced nanocatalysts for fuel cells' electrochemical reactions, alloy nanomaterials have greatly improved electrocatalytic activity and stability and have attracted widespread attention. Enhanced electrocatalytic performance of alloy nanocatalysts could be closely related to the synergistic effects, such as electronic and strain effects. Depending on the arrangement of atoms, alloys can be classified into random alloy and intermetallic compounds (ordered structure). Intermetallic compounds generally have lower heats of formation and stronger heteroatomic bonding strength relative to the random alloy, resulting in high chemical and structural stability in either full pH solutions or electrochemical tests. Here, we summarize the latest advances and the structure-function relationship of noble metal alloy nanocatalysts, among which Pt-based catalysts are the main ones, as well as comprehensively understand why they significantly affect the electrocatalytic performance of fuel cells. Novel alloy nanocatalysts with a robust three-phase interface to achieve efficient charge and mass transfer can obtain desirable activity and stability in the electrochemical workstation tests, and is expected to acquire a higher power density on fuel cell test systems with harsh test conditions.

Ethanol Electrooxidation on Rhodium-Lead Catalysts in Alkaline Media: High Mass Activity, Long-Term Durability, and Considerable CO2 Selectivity

Rhodium (Rh)-based catalysts may solve the long-standing inefficient oxidation of ethanol for direct ethanol fuel cells (DEFCs); however, the performance of ethanol oxidation reaction (EOR) on existing Rh-based catalysts are far limited. Herein, the Rh-Pb catalysts are synthesized by building Pb and Pb oxide around Rh nanodomain, which shows highly efficient splitting CC bond and facile further oxidation of as-generated C1 intermediates (CO_ad and CH_x fragments). It exhibits an ever-highest EOR peak mass activity of ≈2636 mA mg^-1 _Rh among Rh-based catalysts in alkaline media. Meanwhile, its anodic current remains ≈50% even after a 4 h durability test at 0.53 V versus RHE. As for the C1-pathway selectivity, in situ infrared adsorption spectral (IRAS) results demonstrate that it could significantly improve the production of CO₂ . More directly, the apparent faraday efficiency of EOR C1 pathway is estimated to be as high as 20% (at 0.53 V versus RHE). This Rh-Pb catalyst could hold great promise for developing the commercial DEFCs.