Indium Catalysts for Low-Pressure CO2/Epoxide Ring-Opening Copolymerization: Evidence for a Mononuclear Mechanism?

Binary and Halide-free Catalyst Systems Based on Al/Ga/In Aminopyridylbisphenolate Complexes for the Cycloaddition of Epoxides and CO2

Group 13 complexes bearing an aminopyridylbisphenol ligand have been prepared [ML-X; L = ligand, M = Al (X = Cl and Br), Ga (X = Cl, Br, and I), or In (X = Cl)]. The structures of the complexes containing the chloride ligand (ML-Cl; M = Al, Ga, and In) have been directly compared through an X-ray crystallography study, with differences in the monomeric or dimeric nature of their structures observed. All of the complexes obtained have been studied as potential catalysts for the synthesis of cyclic carbonates from epoxides and CO2. It has been found that the indium complex, as part of a traditional binary catalyst system (catalyst + tetra-butylammonium halide cocatalyst), displays the highest catalytic activity and is active under rather mild reaction conditions (balloon pressure of CO2). Meanwhile, it has been found that the GaL-I complex is a competent single-component catalyst (no need for addition of a cocatalyst) at more elevated reaction temperatures and pressures. A full substrate scope has been performed with both developed catalyst systems to demonstrate their applicability. In addition to the experimental results, a density functional theory study was performed on both catalyst systems. These results explain both why the indium catalyst is the most active under binary catalyst system conditions and how the gallium catalyst with an iodide (GaL-I) is able to act as a single-component catalyst in contrast to the indium-based complex.

Using the phospha-Michael reaction for making phosphonium phenolate zwitterions

The reactions of 2,4-di-tert-butyl-6-(diphenylphosphino)phenol and various Michael acceptors (acrylonitrile, acrylamide, methyl vinyl ketone, several acrylates, methyl vinyl sulfone) yield the respective phosphonium phenolate zwitterions at room temperature. Nine different zwitterions were synthesized and fully characterized. Zwitterions with the poor Michael acceptors methyl methacrylate and methyl crotonate formed, but could not be isolated in pure form. The solid-state structures of two phosphonium phenolate molecules were determined by single-crystal X-ray crystallography. The bonding situation in the solid state together with NMR data suggests an important contribution of an ylidic resonance structure in these molecules. The phosphonium phenolates are characterized by UV-vis absorptions peaking around 360 nm and exhibit a negative solvatochromism. An analysis of the kinetics of the zwitterion formation was performed for three Michael acceptors (acrylonitrile, methyl acrylate, and acrylamide) in two different solvents (chloroform and methanol). The results revealed the proton transfer step necessary to stabilize the initially formed carbanion as the rate-determining step. A preorganization of the carbonyl bearing Michael acceptors allowed for reasonable fast direct proton transfer from the phenol in aprotic solvents. In contrast, acrylonitrile, not capable of forming a similar preorganization, is hardly reactive in chloroform solution, while in methanol the corresponding phosphonium phenolate is formed.

Epoxide/CO2 Cycloaddition Reaction Catalyzed by Indium Chloride Complexes Supported by Constrained Inden Schiff-Base Ligands

Cyclic carbonates have received significant interests for uses as reagents, solvents, and monomers. The coupling reaction of epoxides with carbon dioxide (CO2 ) to produce cyclic carbonate is an attractive route which can significantly reduce greenhouse gas emissions and environmental hazards. Herein, a series of five indium chloride complexes supported by inden Schiff-base ligands were reported along with four X-ray crystal structures. The constrained five-membered rings were added to the ligands to enhance the coordination of epoxides to the In metal. From the catalyst screening, In inden complex having tert-butyl substituents and propylene backbone in combination with tetrabutylammonium bromide (TBAB) exhibited the highest catalytic activity (TON up to 1017) for propylene oxide/CO2 coupling reaction with >99 % selectivity for cyclic carbonate under solvent-free conditions. In addition, the catalyst was shown to be active at atmospheric pressure of CO2 at room temperature. The catalyst system can be applied to various internal and terminal epoxide substrates to exclusively produce the corresponding cyclic carbonates.

Enabling New Approaches: Recent Advances in Processing Aliphatic Polycarbonate-Based Materials

Aliphatic polycarbonates (aPCs) have become increasingly popular as functional materials due to their biocompatibility and capacity for on-demand degradation. Advances in polymerization techniques and the introduction of new functional monomers have expanded the library of aPCs available, offering a diverse range of chemical compositions and structures. To accommodate the emerging requirements of new applications in biomedical and energy-related fields, various manufacturing techniques have been adopted for processing aPC-based materials. However, a summary of these techniques has yet to be conducted. The aim of this paper is to enrich the toolbox available to researchers, enabling them to select the most suitable technique for their materials. In this paper, a concise review of the recent progress in processing techniques, including controlled self-assembly, electrospinning, additive manufacturing, and other techniques, is presented. We also highlight the specific challenges and opportunities for the sustainable growth of this research area and the successful integration of aPCs in industrial applications.

Bis(salicylamidine) Ligands (FAlen): A Variant of Salen with "à la Carte" Denticity

Ethylene- and phenylene-bridged bis(salicylamidine) ligands have been readily prepared from ethylene or phenylenediamine and iminium chloride derivatives generated in situ from N,N-dialkylsalicylamides. The former, in its diprotonated form (FAlenH₂), reacts with AlMe₃ to afford a zwitterionic dimethyldiphenoxyaluminate complex with the FAlen ligand monoprotonated and in a bidentate κ²O,O' fashion. A phenylene-bridged proligand behaves differently, yielding a neutral methylaluminum complex bearing a κ³O,N,O'-coordinated FAlen ligand. From these complexes, methyl anion abstraction with B(C₆F₅)₃ or a reaction with Schrock's alcohol leads to the corresponding aluminum cationic or alkoxy complexes in which a κ⁴O,N,N',O'-coordination mode of the FAlen ligand is observed. X-ray diffraction studies of the proligands and of the complexes show that the amidine functions feature a trans configuration when the N-amidine atom is not coordinated to the metal and conversely a cis configuration when it is. Density functional theory calculations show that trans-cis isomerization of the amidine functions occurs upon coordination with the metal ion with very low energy barriers. They also confirm the intuition that the denticity of the FAlen ligands in the complexes is directly related to the electron richness of the metal ion. At last, FAlen Al complexes are used as initiators for the controlled ring-opening polymerization of rac-lactide to afford poly(lactic acid) with slight isotactic bias.

One-pot terpolymerization of CHO, CO2 and L-lactide using chloride indium catalysts

Ring-opening copolymerization reactions of epoxides, carbon dioxide and cyclic esters to produce copolymers is a promising strategy to prepare CO₂-based polymeric materials. In this contribution, bimetallic chloride indium complexes have been developed as catalysts for the copolymerization processes of cyclohexene oxide, carbon dioxide and L-lactide under mild reaction conditions. The catalysts displayed good catalytic activity and excellent selectivity towards the preparation of poly(cyclohexene carbonate) (PCHC) at one bar CO₂ pressure in the absence of a co-catalyst. Additionally, polyester-polycarbonate copolymers poly(lactide-co-cyclohexene carbonate) (PLA-co-PCHC) were obtained via an one-pot one-step route without the use of a co-catalyst. The degree of incorporation of carbon dioxide can be easily modulated by changing the CO₂ pressure and the monomer feed, resulting in copolymers with different thermal properties.

Group 13 salphen compounds (In, Ga and Al): a comparison of their structural features and activities as catalysts for cyclic carbonate synthesis

Many complexes based on group 13 elements have been successfully applied as catalysts for the synthesis of cyclic carbonates from epoxides and CO₂ and to date these have provided some of the most active catalysts developed. It is notable that most reports have focused on the use of aluminium-based compounds likely because of the well-established Lewis acidity of this element and its cost. In comparison, relatively little attention has been paid to the development of catalysts based on the heavier group 13 elements, despite their known Lewis acidic properties. This study describes the synthesis of aluminium, gallium and indium compounds supported by a readily prepared salphen ligand and explores both their comparative structures and also their potential as catalysts for the synthesis of cyclic carbonates. In addition, the halide ligand which forms a key part of the compound has been systematically varied and the effect of this change on the structure and catalytic activity is also discussed. It is demonstrated that the indium compounds are actually, and unexpectedly, the most active for cyclic carbonate synthesis, despite their lower Lewis acidity when compared to their aluminium congeners. The experimental observations from this work are fully supported by a Density Functional Theory (DFT) study, which provides important insights into the reasons as to why the indium catalyst with bromide, [InBr(salphen)], is most active.

Cooperative Initiation in a Dinuclear Indium Complex for CO2 Epoxide Copolymerization

Dinuclear indium complexes have been synthesized and characterized. These include neutral and cationic indium complexes supported by a Schiff base ligand bearing a binaphthol linker. The new compounds were investigated for alternating copolymerization of CO₂ and cyclohexene oxide. In particular, the neutral indium chloride complex (±)-[(O_NapN_iN)InCl₂]₂ (4) showed high conversion of cyclohexene oxide and selectivity for poly(cyclohexene carbonate) formation without cocatalysts at 80 °C under various CO₂ pressures (2-30 bar). Importantly, the reactivity of the dinuclear indium chloride complex 4 is drastically different from that of the mononuclear indium chloride complex (±)-(NN_iO_tBu)InCl₂ (5), suggesting a cooperative initiation mechanism involving the two indium centers in 4.

Main group metal polymerisation catalysts

With sustainability at the forefront of current polymerisation research, the typically earth-abundant, inexpensive and low-toxicity main group metals are attractive candidates for catalysis. Main group metals have been exploited in a broad range of polymerisations, ranging from classical alkene polymerisation to the synthesis of new bio-derived and degradable polyesters and polycarbonates via ring-opening polymerisation and ring-opening copolymerisation. This tutorial review highlights efficient polymerisation catalysts based on Group 1, Group 2, Zn and Group 13 metals. Key mechanistic pathways and catalyst developments are discussed, including tailored ligand design, heterometallic cooperativity, bicomponent systems and careful selection of the polymerisation conditions, all of which can be used to fine-tune the metal Lewis acidity and the metal-alkyl bond polarity.

A sustainable approach for the synthesis of recyclable cyclic CO2-based polycarbonates

It is highly desirable to reduce the environmental pollution related to the disposal of end-of-life plastics. Polycarbonates derived from the copolymerization of CO2 and epoxides have attracted much attention since they can enable CO2-fixation and furnish biorenewable and degradable polymeric materials. So far, only linear CO2-based polycarbonates have been reported and typically degraded to cyclic carbonates. Here we synthesize a homogeneous dinuclear methyl zinc catalyst ((BDI-ZnMe)2, 1) to rapidly copolymerize meso-CHO and CO2 into poly(cyclohexene carbonate) (PCHC) with an unprecedentedly cyclic structure. Moreover, in the presence of trace amounts of water, a heterogeneous multi-nuclear zinc catalyst ((BDI-(ZnMe2·xH2O)) n , 2) is prepared and shows up to 99% selectivity towards the degradation of PCHC back to meso-CHO and CO2. This strategy not only achieves the first case of cyclic CO2-based polycarbonate but also realizes the complete chemical recycling of PCHC back to its monomers, representing closed-loop recycling of CO2-based polycarbonates.

Zr(IV) Catalyst for the Ring-Opening Copolymerization of Anhydrides (A) with Epoxides (B), Oxetane (B), and Tetrahydrofurans (C) to Make ABB- and/or ABC-Poly(ester-alt-ethers)

Poly(ester-alt-ethers) can combine beneficial ether linkage flexibility and polarity with ester linkage hydrolysability, furnishing fully degradable polymers. Despite their promising properties, this class of polymers remains underexplored, in part due to difficulties in polymer synthesis. Here, a catalyzed copolymerization using commercially available monomers, butylene oxide (BO)/oxetane (OX), tetrahydrofuran (THF), and phthalic anhydride (PA), accesses a series of well-defined poly(ester-alt-ethers). A Zr(IV) catalyst is reported that yields polymer repeat units comprising a ring-opened PA (A), followed by two ring-opened cyclic ethers (B/C) (-ABB- or -ABC-). It operates with high polymerization control, good rate, and successfully enchains epoxides, oxetane, and/or tetrahydrofurans, providing a straightforward means to moderate the distance between ester linkages. Kinetic analysis of PA/BO copolymerization, with/without THF, reveals an overall second-order rate law: first order in both catalyst and butylene oxide concentrations but zero order in phthalic anhydride and, where it is present, zero order in THF. Poly(ester-alt-ethers) have lower glass-transition temperatures (-16 °C < T_g < 12 °C) than the analogous alternating polyesters, consistent with the greater backbone flexibility. They also show faster ester hydrolysis rates compared with the analogous AB polymers. The Zr(IV) catalyst furnishes poly(ester-alt-ethers) from a range of commercially available epoxides and anhydride; it presents a straightforward method to moderate degradable polymers' properties.

Comparison of Imine- and Phosphinimine-Supported Indium Complexes: Tuning the Reactivity for the Sequential and Simultaneous Copolymerization of Lactide and ε-Caprolactone

Imine- and phosphinimine-supported indium complexes were used as catalysts in the polymerization of racemic lactide and ε-caprolactone as well as their copolymerization by the sequential and simultaneous addition of monomers. Tuning the electronics and sterics of the indium centers by either (i) changing the nature of the nitrogen donors and (ii) coordinating a hemilabile side group had a significant effect on the reactivity of the complexes, their stability, and their control in the synthesis of block copolymers. Specifically, the imine-supported complex (5) showed the highest activity in the homo- and copolymerization of the cyclic esters, in contrast to the phosphinimine-supported complex (7), which was significantly slower and less stable. The presence of morpholine and thiomorpholine hemilabile side groups either reduced the activity or prevented the formation of alkoxide complexes.

Access to axially chiral aryl 1,3-dienes by transient group directed asymmetric C-H alkenylations

We present a Pd-catalyzed atroposelective preparation of aryl 1,3-dienes from readily available styrenes and olefins through aldehyde derived transient chiral auxiliary, proceeding by enantioselective olefinic C-H alkenylation of styrenes via...

Indium-Catalyzed CO2/Epoxide Copolymerization: Enhancing Reactivity with a Hemilabile Phosphine Donor

Group 13 metal complexes have emerged as powerful catalysts for transforming CO₂ into added-value products. However, direct comparisons of reactivity between Al, Ga, and In catalysts are rare. We report aluminum (1), gallium (2), and indium (3) complexes supported by a half-salen H[PNNO] ligand with a pendent phosphine donor and investigate their activity as catalysts for the copolymerization of CO₂ and cyclohexene oxide. In solution, the P-donor is dissociated for the Al and Ga complexes while for the In complex it exhibits hemilabile behavior. The indium complex shows higher conversion and selectivity than the Al or Ga analogues. The mechanism of the reaction was studied by NMR and FTIR spectroscopy experiments as well as structural characterization of off-cycle catalytic intermediate indium trichloride complex [(PNNO)InCl₃][TBA] (4). This study highlights the impact of a hemilabile phosphine group on group 13 metals and provides a detailed analysis of the initiation step in CO₂/epoxide copolymerization reactions.

Sustainable glycerol terpolycarbonates as temporary bioadhesives

We describe the synthesis of poly(glycidyl acetate-co-glycidyl butyrate carbonate)s via the terpolymerization of glycidyl acetate (GA), glycidyl butyrate (GB), and CO2 by a cobalt salen complex in high atom economy. These new non-cytotoxic polycarbonates are pressure-sensitive adhesives, and peel testing shows the adhesive strength ranges from Scotch-Tape® to hot-melt glues based on glycidyl butyrate content. The tunable adherence, benign degradation products, and facile application and removal suggest their utility as temporary adhesives, such as those used in biomedical applications or medical devices. One polymer, (GA-co-GB)-87, exhibits the proper adhesive strength to sufficiently adhere a collagen buttress to the jaws of a steel surgical stapler and easily release the buttress after firing to successfully cut, close, and implant the buttress into lung tissue in an ex vivo sheep model.

Heterotrimetallic Carbon Dioxide Copolymerization and Switchable Catalysts: Sodium is the Key to High Activity and Unusual Selectivity

A challenge in polymer synthesis using CO2 is to precisely control CO2 placement in the backbone and chain end groups. Here, a new catalyst class delivers unusual selectivity and is self-switched between different polymerization cycles to construct specific sequences and desirable chain-end chemistries. The best catalyst is a trinuclear dizinc(II)sodium(I) complex and it functions without additives or co-catalysts. It shows excellent rates across different ring-opening (co)polymerization catalytic cycles and allows precise control of CO2 incorporation within polyesters and polyethers, thereby allowing access to new polymer chemistries without requiring esoteric monomers, multi-reactor processes or complex post-polymerization procedures. The structures, kinetics and mechanisms of the catalysts are investigated, providing evidence for intermediate speciation and uncovering the factors governing structure and composition and thereby guiding future catalyst design.

Recent Developments in Ring-Opening Copolymerization of Epoxides With CO2 and Cyclic Anhydrides for Biomedical Applications

The biomedical applications of polyesters and polycarbonates are of interest due to their potential biocompatibility and biodegradability. Confined by the narrow scope of monomers and the lack of controlled polymerization routes, the biomedical-related applications of polyesters and polycarbonates remain challenging. To address this challenge, ring-opening copolymerization (ROCOP) has been exploited to prepare new alternating polyesters and polycarbonates, which would be hard to synthesize using other controlled polymerization methods. This review highlights recent advances in catalyst development, including the emerging dinuclear organometallic complexes and metal-free Lewis pair systems. The post-polymerization modification methods involved in tailoring the biomedical functions of resultant polyesters and polycarbonates are summarized. Pioneering attempts for the biomedical applications of ROCOP polyesters and polycarbonates are presented, and the future opportunities and challenges are also highlighted.

Phosphasalalen Rare-Earth Complexes for the Polymerization of rac-Lactide and rac-β-Butyrolactone

A series of new phosphasalalen pro-ligands, analogues of salalen but with an iminophosphorane replacing the imine functionality, and their corresponding rare-earth alkoxide and siloxide complexes were synthesized. The multinuclear NMR spectra and X-ray diffraction analyses revealed that, for the tert-butoxide and ethoxide complexes, the resulting phosphasalalen rare-earth product was composed of a mononuclear alkoxide and a binuclear complex containing bridged alkoxo and hydroxo groups, while an analogous binuclear complex was isolated as the sole product for the siloxide complex. All the complexes could catalyze the heteroselective ring-opening polymerization (ROP) of rac-lactide (P_r up to 0.77) with high catalytic activities and a controlled polydispersity. Remarkably, the yttrium and lutetium phosphasalalen complexes could also efficiently catalyze the ROP of rac-β-butyrolactone to produce syndiotactic polymers (P_r up to 0.73) while their salalen analogues were inert, revealing the special effects of the iminophosphorane moiety. Detailed end-group analyses and kinetic investigations suggested that the alkoxo-hydroxo-bridged complexes maintained their binuclear structures in the polymerization.

Conversion of dilute CO2 to cyclic carbonates at sub-atmospheric pressures by a simple indium catalyst

A simple indium halide with an ammonium salt catalyst can catalyze effectively the cycloaddition of epoxide and dilute CO₂. A detailed mechanistic investigation is conducted using kinetics, isotope labeling, and in situ NMR and IR experiments.

Rare-Earth Metal Complexes Supported by Polydentate Phenoxy-Type Ligand Platforms: C-H Activation Reactivity and CO2/Epoxide Copolymerization Catalysis

Mono- and dinuclear group 3 metal complexes incorporating polydentate bis(imino)phenoxy {N²O}^- and bis(amido)phenoxy {N²O}^3- ligands were synthesized by alkane elimination reactions from the tris(alkyl) M(CH₂SiMe₃)₃(THF)₂ and M(CH₂C₆H₄-o-NMe₂)₃ (M = Sc, Y) precursors. Complex 1a-Y was used for the selective C-H activation of 2-phenylpyridine at the 2'-phenyl position affording the corresponding bis(aryl) product 3a-Y, which was found to be reacted reluctantly with weak electrophiles (styrene, imines, hydrosilanes). The mechanism of formation of 3a-Y was established by DFT calculations, which also corroborated high stability of the complex toward insertion of styrene, apparently stemming from the inability to form the corresponding adduct. Copolymerization of cyclohexene oxide and CO₂ promoted by 1a-Y (0.1-0.5 mol %) was demonstrated to proceed under mild conditions (toluene, 70 °C, P_CO2 = 12 bar) giving polycarbonates with high efficiency (maximal TON of 460) and selectivity (97-99% of carbonate units).

Recent advances in synthesis of organometallic complexes of indium

The indium complexes are being used in many applications like catalysis, optoelectronics, sensors, solar cells, biochemistry, medicine, infrared (IR) mirrors and thin-film transistors (TFTs). In organometallic complexes of indium, it forms different types of complexes with single, double, triple and tetra linkages by coordinating with numerous elements like C, N, O and S and also with some other elements like Se and Ru. So, the present study comprises all the possible ways to synthesize the indium complexes by reacting with different organic ligands; most of them are N-heterocyclic carbenes, amines, amides and phenols. The commonly used solvents for these syntheses are tetrahydrofuran, dichloromethane, toluene, benzene, dimethyl sulfoxide (DMSO) and water. According to the nature of the ligands, indium complexes were reported at different temperatures and stirring time. Because of their unique characteristics, the organometallic chemistry of group 13 metal indium complexes remains a subject of continuing interest in synthetic chemistry as well as material science.

Copolymerization of CHO/CO2 catalyzed by a series of aluminum amino-phenolate complexes and insights into structure-activity relationships

Two series of monometallic aluminum complexes were prepared and characterized by elemental analyses, ¹H and ¹³C{¹H} NMR spectroscopy, and X-ray crystallography: Al[L]X, where [L] = dimethylaminoethylamino-N,N-bis(2-methylene-4,6-tert-butylphenolate) and X = Cl, OEt, and Al[L]₂Cl, where [L] = 6-{[(2R,6R)-2,6-dimethyl-4-morpholino]methylene}-2,4-bis(tert-butyl)phenolate or 6-(piperidinomethylene)-2-(tert-butyl)-4-(methyl)phenolate. All the complexes, including the previously reported morpholinyl complex Al[L]Cl, where [L] = 4-(2-aminoethyl)morpholinylamino-N,N-bis(2-methylene-4,6-tert-butylphenolate), were tested as catalysts for copolymerization of cyclohexene oxide and CO₂ in the presence and absence of PPNCl. When coupled with 1 equiv. PPNCl, the complexes exhibit similar activities and the best selectivity for poly(cyclohexenecarbonate) vs. the cyclic product, cyclohexene carbonate, was obtained with the morpholinyl complex (ca. 90%) whereas significantly lower selectivities (<1-63%) were obtained with the other complexes. Preliminary DFT calculations investigating this difference in selectivity were carried out by analyzing the aluminum partial atomic charges in the Al-carbonate intermediates.

Polyurethanes and Polyallophanates via Sequence-Selective Copolymerization of Epoxides and Isocyanates

Aryl isocyanates are introduced as comonomers for ring-opening copolymerization (ROCOP) with epoxides. Informed by studies of reaction kinetics, we show that divergent sequence selectivity for AB- and ABB-type copolymers can be achieved with a single dimagnesium catalyst. The resulting materials respectively constitute a new class of polyurethanes (PUs) and a new class of materials featuring an unprecedented backbone structure, the polyallophanates (PAs). The successful use of isocyanate comonomers in this way marks a new direction for the field of ROCOP while providing distinct opportunities for expansion of PU structural diversity. Specifically, the methodology reported herein delivers PUs featuring fully substituted (tertiary) carbamyl nitrogen atoms, a structural motif that is almost inaccessible via extant polymerization strategies. Thus, in one step from commercially available comonomers, our methodology expands the scope of ROCOP and gives access to diverse materials featuring both privileged (PU) and unexplored (PA) microstructures.

Cationic indium catalysts for ring opening polymerization: tuning reactivity with hemilabile ligands

This is a comprehensive study of the effects of rationally designed hemilabile ligands on the stability, reactivity, and change in catalytic behavior of indium complexes. We report cationic alkyl indium complexes supported by a family of hemi-salen type ligands bearing hemilabile thiophenyl (2a), furfuryl (2b) and pyridyl (2c) pendant donor arms. Shelf-life and stability of these complexes followed the trend 2a < 2b < 2c, showing direct correlation to the affinity of the pendant donor group to the indium center. Reactivity towards polymerization of epichlorohydrin and cyclohexene oxide followed the trend 2a > 2b > 2c with control of polymerization following an inverse relationship to reactivity. Surprisingly, 2c polymerized racemic lactide without an external initiator, likely through an alkyl-initiated coordination-insertion mechanism.

Ti(IV)-Tris(phenolate) Catalyst Systems for the Ring-Opening Copolymerization of Cyclohexene Oxide and Carbon Dioxide

Titanium(IV) complexes of amino-tris(phenolate) ligands (LTiX, X = chloride, isopropoxide) together with bis(triphenylphosphine)iminium chloride (PPNCl) are active catalyst systems for the ring-opening copolymerization of carbon dioxide and cyclohexene oxide. They show moderate activity, with turnover frequency values of ∼60 h^–1 (0.02 mol % of catalyst, 80 °C, 40 bar of CO₂) and high selectivity (carbonate linkages >90%), but their absolute performances are lower than those of the most active Ti(IV) catalyst systems. The reactions proceed with linear evolution of polycarbonate (PCHC) molar mass with epoxide conversion, consistent with controlled polymerizations, and evolve bimodal molar mass distributions of PCHC (up to M_n = 42 kg mol^–1). The stoichiometric reaction between [LTiOⁱPr] and tetraphenylphosphonium chloride, PPh₄Cl, allows isolation of the putative catalytic intermediate [LTi(OⁱPr)Cl]⁻, which is characterized using single-crystal X-ray diffraction techniques. The anionic titanium complex [LTi(OR)Cl]⁻ is proposed as a model for the propagating alkoxide intermediates in the catalytic cycle.

Mechanistic guidelines in nonreductive conversion of CO2: the case of cyclic carbonates

This perspective provides general mechanistic guidelines for the catalytic formation of cyclic organic carbonates from CO₂ and cyclic ethers.

Indium phosphasalen catalysts showing high isoselectivity and activity in racemic lactide and lactone ring opening polymerizations

Study of a series of phosphasalen indium alkoxide complexes reveals that the substitution pattern at the phosphorus atoms can deliver outstanding isoselectivity with high rates.

Heterodinuclear complexes featuring Zn(ii) and M = Al(iii), Ga(iii) or In(iii) for cyclohexene oxide and CO2 copolymerisation

The ring opening copolymerisation of CO₂ and epoxides is a useful means to valorise waste emissions and to reduce pollution in polymer manufacturing. Heterodinuclear catalysts, particularly those of Zn(ii)/Mg(ii), have shown better performances than homodinuclear analogues in this reaction. As part of on-going efforts to better understand the catalytic synergy, this work describes a series of heterodinuclear complexes, combining Zn(ii) with a metal from Group 13 (M = Al(iii), Ga(iii) or In(iii)). The complexes are synthesised from a symmetrical macrocyclic ligand in high yields via sequential metalation steps and are the thermodynamic reaction products. The Zn(ii)/Group 13 complexes are effective homogeneous catalysts for the ring opening copolymerisation (ROCOP) of cyclohexene oxide at 1 bar pressure of carbon dioxide, but all show inferior performances compared to the di-zinc analogue. The CO₂ uptake into the polymer increases in the order Al(iii) < Ga(iii) < In(iii) which is attributed to lower Lewis acidity heavier Group 13 homologues showing a reduced tendency to form ether linkages. Concurrently, polycarbonate activity increases down the Group 13 series consistent with weaker metal-oxygen bonds which show enhanced lability to insertion reactions.