Genetically Encoded Cholesterol-Modified Polypeptides

Genetically Fusing Order-Promoting and Thermoresponsive Building Blocks to Design Hybrid Biomaterials

The unique biophysical and biochemical properties of intrinsically disordered proteins (IDPs) and their recombinant derivatives, intrinsically disordered protein polymers (IDPPs) offer opportunities for producing multistimuli-responsive materials; their sequence-encoded disorder and tendency for phase separation facilitate the development of multifunctional materials. This review highlights the strategies for enhancing the structural diversity of elastin-like polypeptides (ELPs) and resilin-like polypeptides (RLPs), and their self-assembled structures via genetic fusion to ordered motifs such as helical or beta sheet domains. In particular, this review describes approaches that harness the synergistic interplay between order-promoting and thermoresponsive building blocks to design hybrid biomaterials, resulting in well-structured, stimuli-responsive supramolecular materials ordered on the nanoscale.

Modulating Phase Behavior in Fatty Acid-Modified Elastin-like Polypeptides (FAMEs): Insights into the Impact of Lipid Length on Thermodynamics and Kinetics of Phase Separation

Although post-translational lipidation is prevalent in eukaryotes, its impact on the liquid-liquid phase separation of disordered proteins is still poorly understood. Here, we examined the thermodynamic phase boundaries and kinetics of aqueous two-phase system (ATPS) formation for a library of elastin-like polypeptides modified with saturated fatty acids of different chain lengths. By systematically altering the physicochemical properties of the attached lipids, we were able to correlate the molecular properties of lipids to changes in the thermodynamic phase boundaries and the kinetic stability of droplets formed by these proteins. We discovered that increasing the chain length lowers the phase separation temperature in a sigmoidal manner due to alterations in the unfavorable interactions between protein and water and changes in the entropy of phase separation. Our kinetic studies unveiled remarkable sensitivity to lipid length, which we propose is due to the temperature-dependent interactions between lipids and the protein. Strikingly, we found that the addition of just a single methylene group is sufficient to allow tuning of these interactions as a function of temperature, with proteins modified with C7-C9 lipids exhibiting non-Arrhenius dependence in their phase separation, a behavior that is absent for both shorter and longer fatty acids. This work advances our theoretical understanding of protein-lipid interactions and opens avenues for the rational design of lipidated proteins in biomedical paradigms, where precise control over the phase separation is pivotal.

Encoding Structure in Intrinsically Disordered Protein Biomaterials

In nature, proteins range from those with highly ordered secondary and tertiary structures to those that completely lack a well-defined three-dimensional structure, termed intrinsically disordered proteins (IDPs). IDPs are generally characterized by one or more segments that have a compositional bias toward small hydrophilic amino acids and proline residues that promote structural disorder and are called intrinsically disordered regions (IDRs). The combination of IDRs with ordered regions and the interactions between the two determine the phase behavior, structure, and function of IDPs. Nature also diversifies the structure of proteins and thereby their functions by hybridization of the proteins with other moieties such as glycans and lipids; for instance, post-translationally glycosylated and lipidated proteins are important cell membrane components. Additionally, diversity in protein structure and function is achieved in nature through cross-linking proteins within themselves or with other domains to create various topologies. For example, an essential characteristic of the extracellular matrix (ECM) is the cross-linking of its network components, including proteins such as collagen and elastin, as well as polysaccharides such as hyaluronic acid (HA). Inspired by nature, synthetic IDP (SynIDP)-based biomaterials can be designed by employing similar strategies with the goal of introducing structural diversity and hence unique physiochemical properties. This Account describes such materials produced over the past decade and following one or more of the following approaches: (1) incorporating highly ordered domains into SynIDPs, (2) conjugating SynIDPs to other moieties through either genetically encoded post-translational modification or chemical conjugation, and (3) engineering the topology of SynIDPs via chemical modification. These approaches introduce modifications to the primary structure of SynIDPs, which are then translated to unique three-dimensional secondary and tertiary structures. Beginning with completely disordered SynIDPs as the point of origin, structure may be introduced into SynIDPs by each of these three unique approaches individually along orthogonal axes or by combinations of the three, enabling bioinspired designs to theoretically span the entire range of three-dimensional structural possibilities. Furthermore, the resultant structures span a wide range of length scales, from nano- to meso- to micro- and even macrostructures. In this Account, emphasis is placed on the physiochemical properties and structural features of the described materials. Conjugates of SynIDPs to synthetic polymers and materials achieved by simple mixing of components are outside the scope of this Account. Related biomedical applications are described briefly. Finally, we note future directions for the design of functional SynIDP-based biomaterials.

The construction of elastin-like polypeptides and their applications in drug delivery system and tissue repair

Elastin-like polypeptides (ELPs) are thermally responsive biopolymers derived from natural elastin. These peptides have a low critical solution temperature phase behavior and can be used to prepare stimuli-responsive biomaterials. Through genetic engineering, biomaterials prepared from ELPs can have unique and customizable properties. By adjusting the amino acid sequence and length of ELPs, nanostructures, such as micelles and nanofibers, can be formed. Correspondingly, ELPs have been used for improving the stability and prolonging drug-release time. Furthermore, ELPs have widespread use in tissue repair due to their biocompatibility and biodegradability. Here, this review summarizes the basic property composition of ELPs and the methods for modulating their phase transition properties, discusses the application of drug delivery system and tissue repair and clarifies the current challenges and future directions of ELPs in applications.

Lipidation Alters the Structure and Hydration of Myristoylated Intrinsically Disordered Proteins

Lipidated proteins are an emerging class of hybrid biomaterials that can integrate the functional capabilities of proteins into precisely engineered nano-biomaterials with potential applications in biotechnology, nanoscience, and biomedical engineering. For instance, fatty-acid-modified elastin-like polypeptides (FAMEs) combine the hierarchical assembly of lipids with the thermoresponsive character of elastin-like polypeptides (ELPs) to form nanocarriers with emergent temperature-dependent structural (shape or size) characteristics. Here, we report the biophysical underpinnings of thermoresponsive behavior of FAMEs using computational nanoscopy, spectroscopy, scattering, and microscopy. This integrated approach revealed that temperature and molecular syntax alter the structure, contact, and hydration of lipid, lipidation site, and protein, aligning with the changes in the nanomorphology of FAMEs. These findings enable a better understanding of the biophysical consequence of lipidation in biology and the rational design of the biomaterials and therapeutics that rival the exquisite hierarchy and capabilities of biological systems.

Solution behavior and encapsulation properties of fatty acid-elastin-like polypeptide conjugates

Developing new biomaterials is an active research area owing to their applications in regenerative medicine, tissue engineering and drug delivery. Elastin-like polypeptides (ELPs) are good candidates for these applications because they are biosourced, biocompatible and biodegradable. With the aim of developing ELP-based micelles for drug delivery applications we have synthesized 15 acyl-ELP compounds by conjugating myristic, palmitic, stearic, oleic or linoleic acid to the N-terminus of three ELPs differing in molar mass. The ELP-fatty acid conjugates have interesting solution behavior. They form micelles at low temperatures and aggregate above the cloud point temperature (Tcp). The critical micelle concentration depends on the fatty acid nature while the micelle size is mainly determined by the ELP block length. We were able to show that ELPs were better hydrated in the micelles than in their individual state in solution. The micelles are stable in phosphate-buffered saline at temperatures below the Tcp, which can vary between 20 °C and 38 °C depending on the length or hydrophilicity of the ELP. Acyl-ELP micelles were loaded with the small hydrophobic molecule Nile red. The encapsulation efficiency and release kinetics showed that the best loading conditions were achieved with the largest ELP conjugated to stearic acid.

Elastin-like polypeptide-based micelles as a promising platform in nanomedicine

New and improved nanomaterials are constantly being developed for biomedical purposes. Nanomaterials based on elastin-like polypeptides (ELPs) have increasingly shown potential over the past two decades. These polymers are artificial proteins of which the design is based on human tropoelastin. Due to this similarity, ELP-based nanomaterials are biodegradable and therefore well suited to drug delivery. The assembly of ELP molecules into nanoparticles spontaneously occurs at temperatures above a transition temperature (T_t). The ELP sequence influences both the T_t and the physicochemical properties of the assembled nanomaterial. Nanoparticles with desired properties can hence be designed by choosing the appropriate sequence. A promising class of ELP nanoparticles are micelles assembled from amphiphilic ELP diblock copolymers. Such micelles are generally uniform and well defined. Furthermore, site-specific attachment of cargo to the hydrophobic block results in micelles with the cargo shielded inside their core, while conjugation to the hydrophilic block causes the cargo to reside in the corona where it is available for interactions. Such control over particle design is one of the main contributing factors for the potential of ELP-based micelles as a drug delivery system. Additionally, the micelles are easily loaded with protein or peptide-based cargo by expressing it as a fusion protein. Small molecule drugs and other cargo types can be either covalently conjugated to ELP domains or physically entrapped inside the micelle core. This review aims to give an overview of ELP-based micelles and their applications in nanomedicine.

A cell-based bioluminescence reporter assay of human Sonic Hedgehog protein autoprocessing to identify inhibitors and activators

The Sonic Hedgehog (SHh) precursor protein undergoes biosynthetic autoprocessing to cleave off and covalently attach cholesterol to the SHh signaling ligand, a vital morphogen and oncogenic effector protein. Autoprocessing is self-catalyzed by SHhC, the SHh precursor's C-terminal enzymatic domain. A method to screen for small molecule regulators of this process may be of therapeutic value. Here, we describe the development and validation of the first cellular reporter to monitor human SHhC autoprocessing noninvasively in high-throughput compatible plates. The assay couples intracellular SHhC autoprocessing using endogenous cholesterol to the extracellular secretion of the bioluminescent nanoluciferase enzyme. We developed a WT SHhC reporter line for evaluating potential autoprocessing inhibitors by concentration response-dependent suppression of extracellular bioluminescence. Additionally, a conditional mutant SHhC (D46A) reporter line was developed for identifying potential autoprocessing activators by a concentration response-dependent gain of extracellular bioluminescence. The D46A mutation removes a conserved general base that is critical for the activation of the cholesterol substrate. Inducibility of the D46A reporter was established using a synthetic sterol, 2-α carboxy cholestanol, designed to bypass the defect through intramolecular general base catalysis. To facilitate direct nanoluciferase detection in the cell culture media of 1536-well plates, we designed a novel anionic phosphonylated coelenterazine, CLZ-2P, as the nanoluciferase substrate. This new reporter system offers a long-awaited resource for small molecule discovery for cancer and for developmental disorders where SHh ligand biosynthesis is dysregulated.

Self-assembling nanocarriers from engineered proteins: Design, functionalization, and application for drug delivery

Self-assembling proteins are valuable building blocks for constructing drug nanocarriers due to their self-assembly behavior, monodispersity, biocompatibility, and biodegradability. Genetic and chemical modifications allow for modular design of protein nanocarriers with effective drug encapsulation, targetability, stimuli responsiveness, and in vivo half-life. Protein nanocarriers have been developed to deliver various therapeutic molecules including small molecules, proteins, and nucleic acids with proven in vitro and in vivo efficacy. This article reviews recent advances in protein nanocarriers that are not derived from natural protein nanostructures, such as protein cages or virus like particles. The protein nanocarriers described here are self-assembled from rationally or de novo designed recombinant proteins, as well as recombinant proteins complexed with other biomolecules, presenting properties that are unique from those of natural protein carriers. Design, functionalization, and therapeutic application of protein nanocarriers will be discussed.

Aqueous synthesis and self-assembly of bioactive and thermo-responsive HA-b-ELP bioconjugates

The design of synthetic (bio)macromolecules that combine biocompatibility, self-assembly and bioactivity properties at the molecular level is an intense field of research for biomedical applications such as (nano)medicine. In this contribution, we have designed and synthesized a library of bioactive and thermo-responsive bioconjugates from elastin-like polypeptides (ELPs) and hyaluronic acid (HA) in order to access bioactive self-assembled nanoparticles. These were prepared by a simple synthetic and purification strategy, compatible with the requirements for biological applications and industrial scale-up. A series of 9 HA-b-ELP bioconjugates with different compositions and block lengths was synthesized under aqueous conditions by strain-promoted azide-alkyne cycloaddition (SPAAC), avoiding the use of catalysts, co-reactants and organic solvents, and isolated by a simple centrifugation step. An extensive physico-chemical study was then performed on the whole library of bioconjugates in an attempt to establish structure-property relationships. In particular, the determination of the critical conditions for thermally driven self-assembly was carried out upon temperature (CMT) and concentration (CMC) gradients, leading to a phase diagram for each of these bioconjugates. These parameters and the size of nanoparticles were found to depend on the chemical composition of the bioconjugates, namely on the respective size of individual blocks. Understanding the mechanism underlying this dependency is a real asset for designing more effective experiments: with key criteria defined (e.g. concentration, temperature, salinity, and biological target), the composition of the best candidates can be rationalized. In particular, four of the bioconjugates (HA_4.6k-ELPn80 or n100 and HA_24k-ELPn80 or n100) were found to self-assemble into well-defined spherical core-shell nanoparticles, with a negative surface charge due to the HA block exposed at the surface, a hydrodynamic diameter between 40 and 200 nm under physiological conditions and a good stability over time at 37 °C. We therefore propose here a versatile and simple design of smart, controllable, and bioactive nanoparticles that present different behaviors depending on the diblocks' composition.

Temperature-Responsive Nano-Biomaterials from Genetically Encoded Farnesylated Disordered Proteins

Despite broad interest in understanding the biological implications of protein farnesylation in regulating different facets of cell biology, the use of this post-translational modification to develop protein-based materials and therapies remains underexplored. The progress has been slow due to the lack of accessible methodologies to generate farnesylated proteins with broad physicochemical diversities rapidly. This limitation, in turn, has hindered the empirical elucidation of farnesylated proteins' sequence-structure-function rules. To address this gap, we genetically engineered prokaryotes to develop operationally simple, high-yield biosynthetic routes to produce farnesylated proteins and revealed determinants of their emergent material properties (nano-aggregation and phase-behavior) using scattering, calorimetry, and microscopy. These outcomes foster the development of farnesylated proteins as recombinant therapeutics or biomaterials with molecularly programmable assembly.

Chemische Synthese und Semisynthese von lipidierten Proteinen

Lipidierung ist eine ubiquitäre Modifikation von Peptiden und Proteinen, die entweder co‐ oder posttranslational auftreten kann. Für die Vielzahl von Lipidklassen wurde gezeigt, dass diese viele entscheidende biologische Aktivitäten, z. B. die Regulierung der Signalweiterleitung, Zell‐Zell‐Adhäsion sowie die Anlagerung von Proteinen an Lipid‐Rafts und Phospholipidmembranen, beeinflussen. Während die Natur Enzyme nutzt, um Lipidmodifikationen in Proteine einzubringen, ist ihre Nutzung für die chemoenzymatische Herstellung von lipidierten Proteinen häufig ineffizient. Eine Alternative ist die Kombination moderner synthetischer und semisynthetischer Techniken, um lipidierte Proteine in reiner und homogen modifizierter Form zu erhalten. Dieser Aufsatz erörtert Fortschritte in der Entwicklung der Lipidierungs‐ und Ligationschemie und deren Anwendung in der Synthese und Semisynthese homogen lipidierter Proteine, die es ermöglichen, den Einfluss dieser Modifikationen auf die Proteinstruktur und ‐funktion zu untersuchen.

Rational Design of Self-Assembling Artificial Proteins Utilizing a Micelle-Assisted Protein Labeling Technology (MAPLabTech): Testing the Scope

Self-assembling artificial proteins (SAPs) have gained enormous interest in recent years due to their applications in different fields. Synthesis of well-defined monodisperse SAPs is accomplished predominantly through genetic methods. However, the last decade has witnessed the use of a few chemical technologies for this purpose. In particular, micelle-assisted protein labeling technology (MAPLabTech) has made huge progress in this area. The first generation MAPLabTech focused on site-specific labeling of the active-site residue of serine proteases to make SAPs. Further, this methodology was exploited for labeling of N-terminal residue of a globular protein to make functional SAPs. In this study, we describe the synthesis of novel SAPs by developing a chemical method for site-specific labeling of a surface-exposed cysteine residue of globular proteins. In addition, we disclose the synthesis of redox-sensitive SAPs and their systematic self-assembly and disassembly studies using size-exclusion chromatography. Altogether these studies further expand the scope of MAPLabTech in different fields such as vaccine design, targeted drug delivery, diagnostic imaging, biomaterials, and tissue engineering.

Adaptive Recombinant Nanoworms from Genetically Encodable Star Amphiphiles

Recombinant nanoworms are promising candidates for materials and biomedical applications ranging from the templated synthesis of nanomaterials to multivalent display of bioactive peptides and targeted delivery of theranostic agents. However, molecular design principles to synthesize these assemblies (which are thermodynamically favorable only in a narrow region of the phase diagram) remain unclear. To advance the identification of design principles for the programmable assembly of proteins into well-defined nanoworms and to broaden their stability regimes, we were inspired by the ability of topologically engineered synthetic macromolecules to acess rare mesophases. To test this design principle in biomacromolecular assemblies, we used post-translational modifications (PTMs) to generate lipidated proteins with precise topological and compositional asymmetry. Using an integrated experimental and computational approach, we show that the material properties (thermoresponse and nanoscale assembly) of these hybrid amphiphiles are modulated by their amphiphilic architecture. Importantly, we demonstrate that the judicious choice of amphiphilic architecture can be used to program the assembly of proteins into adaptive nanoworms, which undergo a morphological transition (sphere-to-nanoworms) in response to temperature stimuli.

Genetically encoded elastin-like polypeptide nanoparticles for drug delivery

Small molecule drugs suffer from poor in vivo half-life, rapid degradation, and systemic off-target toxicity. To address these issues, researchers have developed nanoparticles that significantly enhance the delivery of many drugs while reducing their toxicity and improving targeting to specific organs. Recombinantly synthesized biomaterials such as elastin-like polypeptides (ELPs) have unique attributes that greatly facilitate the rational design of nanoparticles for drug delivery. These attributes include biocompatibility, precise control over amino acid sequence design, and stimuli-responsive self-assembly into nanostructures that can be loaded with a range of drugs to enhance their pharmacokinetics and pharmacodynamics, significantly improving their therapeutic efficacy over the free drugs. This review summarizes recent developments in genetically encoded, self-assembling ELP nanoparticles and their applications for drug delivery.

Chemical Synthesis and Semisynthesis of Lipidated Proteins

Lipidation is a ubiquitous modification of peptides and proteins that can occur either co‐ or post‐translationally. An array of different lipid classes can adorn proteins and has been shown to influence a number of crucial biological activities, including the regulation of signaling, cell–cell adhesion events, and the anchoring of proteins to lipid rafts and phospholipid membranes. Whereas nature employs a range of enzymes to install lipid modifications onto proteins, the use of these for the chemoenzymatic generation of lipidated proteins is often inefficient or impractical. An alternative is to harness the power of modern synthetic and semisynthetic technologies to access lipid‐modified proteins in a pure and homogeneously modified form. This Review aims to highlight significant advances in the development of lipidation and ligation chemistry and their implementation in the synthesis and semisynthesis of homogeneous lipidated proteins that have enabled the influence of these modifications on protein structure and function to be uncovered.

Genetically Encoded Elastin-Like Polypeptides for Drug Delivery

Elastin-like polypeptides (ELPs) are thermally responsive biopolymers that consist of a repeated amino acid motif derived from human tropoelastin. These peptides exhibit temperature-dependent phase behavior that can be harnessed to produce stimuli-responsive biomaterials, such as nanoparticles or injectable drug delivery depots. As ELPs are genetically encoded, the properties of ELP-based biomaterials can be controlled with a precision that is unattainable with synthetic polymers. Unique ELP architectures, such as spherical or rod-like micelles or injectable coacervates, can be designed by manipulating the ELP amino acid sequence and length. ELPs can be loaded with drugs to create controlled, intelligent drug delivery systems. ELPs are biodegradable, nonimmunogenic, and tolerant of therapeutic additives. These qualities make ELPs exquisitely well-suited to address current challenges in drug delivery and have spurred the development of ELP-based therapeutics to treat diseases-such as cancer and diabetes-and to promote wound healing. This review focuses on the use of ELPs in drug delivery systems.

Thermosensitive Vesicles from Chemically Encoded Lipid-Grafted Elastin-like Polypeptides

Biomimetic design to afford smart functional biomaterials with exquisite properties represents synthetic challenges and provides unique perspectives. In this context, elastin-like polypeptides (ELPs) recently became highly attractive building blocks in the development of lipoprotein-based membranes. In addition to the bioengineered post-translational modifications of genetically encoded recombinant ELPs developed so far, we report here a simple and versatile method to design biohybrid brush-like lipid-grafted-ELPs using chemical post-modification reactions. We have explored a combination of methionine alkylation and click chemistry to create a new class of hybrid lipoprotein mimics. Our design allowed the formation of biomimetic vesicles with controlled permeability, correlated to the temperature-responsiveness of ELPs.

Dual roles of the sterol recognition region in Hedgehog protein modification

Nature provides a number of mechanisms to encode dynamic information in biomolecules. In metazoans, there exist rare chemical modifications that occur in entirely unique regimes. One such example occurs in the Hedgehog (Hh) morphogens, proteins singular across all domains of life for the nature of their covalent ligation to cholesterol. The isoform- and context-specific efficiency of this ligation profoundly impacts the activity of Hh morphogens and represents an unexplored facet of Hh ligand-dependent cancers. To elucidate the chemical mechanism of this modification, we have defined roles of the uncharacterized sterol recognition region (SRR) in Hh proteins. We use a combination of sequence conservation, directed mutagenesis, and biochemical assays to specify residues of the SRR participate in cellular and biochemical aspects of Hh cholesterolysis. Our investigations offer a functional portrait of this region, providing opportunities to identify parallel reactivity in nature and a template to design tools in chemical biology.

Post-Translational Modification Mimicry for Programmable Assembly of Elastin-Based Protein Polymers

Post-translational modification (PTM) of protein polymers is emerging as a powerful bioinspired strategy to create protein-based hybrid materials with molecularly encoded assembly and function for applications in nanobiotechnology and medicine. While these modifications can be accomplished by harnessing native biological machinery (i.e., enzymes), the evolutionarily programmed specificity of these enzymes (recognition of select substrates and the limited repertoire of ligation chemistries catalyzed by these enzymes) can limit the type and linkage of PTMs appended to proteins. One approach to overcome this limitation is to leverage advances in site-selective biomolecular modification to prepare synthetic mimics of naturally occurring PTMs that are absent in nature. As a proof of concept, we used scalable bio-orthogonal reactions to prepare synthetic mimics of lipidated proteins with tunable assembly and disassembly. Additionally, we demonstrated that our PTM mimicry regulates the stimuli-responsive phase behavior of intrinsically disordered biopolymers, modulates their self-assembly at the nanoscale, and can be used for programmable disassembly of these materials in acidic environments. Synthetic PTM mimicry opens a path to encode new assembly and disassembly capabilities into hybrid materials that cannot be produced via biosynthesis.

Synthesis of Stable Cholesteryl-Polyethylene Glycol-Peptide Conjugates with Non-Disperse Polyethylene Glycol Lengths

A method for conjugating cholesterol to peptide ligands through non-disperse polyethylene glycol (ND-PEG) through a non-hydrolysable linkage is described. The iterative addition of tetraethylene glycol macrocyclic sulfate to cholesterol (Chol) renders a family of highly pure well-defined Chol-PEG compounds with different PEG lengths from 4 up to 20 ethylene oxide units, stably linked through an ether bond. The conjugation of these Chol-PEG compounds to the cyclic (RGDfK) peptide though Lys5 side chains generates different lengths of Chol-PEG-RGD conjugates that retain the oligomer purity of the precursors, as analysis by HRMS and NMR has shown. Other derivatives were synthesized with similar results, such as Chol-PEG-OCH3 and Chol-PEG conjugated to glutathione and Tf1 peptides through maleimide-thiol chemoselective ligation. This method allows the systematic synthesis of highly pure uniform stable Chol-PEGs, circumventing the use of activation groups on each elongation step and thus reducing the number of synthesis steps.

Engineering the Architecture of Elastin-Like Polypeptides: From Unimers to Hierarchical Self-Assembly

Well-defined tunable nanostructures formed through the hierarchical self-assembly of peptide building blocks have drawn significant attention due to their potential applications in biomedical science. Artificial protein polymers derived from elastin-like polypeptides (ELPs), which are based on the repeating sequence of tropoelastin (the water-soluble precursor to elastin), provide a promising platform for creating nanostructures due to their biocompatibility, ease of synthesis, and customizable architecture. By designing the sequence and composition of ELPs at the gene level, their physicochemical properties can be controlled to a degree that is unmatched by synthetic polymers. A variety of ELP-based nanostructures are designed, inspired by the self-assembly of elastin and other proteins in biological systems. The choice of building blocks determines not only the physical properties of the nanostructures, but also their self-assembly into architectures ranging from spherical micelles to elongated nanofibers. This review focuses on the molecular determinants of ELP and ELP-hybrid self-assembly and formation of spherical, rod-like, worm-like, fibrillar, and vesicle architectures. A brief discussion of the potential biomedical applications of these supramolecular assemblies is also included.

Self-Assembly-Assisted Kinetically Controlled Papain-Catalyzed Formation of mPEG-b-Phe(Leu)x

Self-assembling peptide materials are promising next-generation materials with applications that include tissue engineering scaffolds, drug delivery, bionanomedicine, and enviro-responsive materials. Despite these advances, synthetic methods to form peptides and peptide-polymer conjugates still largely rely on solid-phase peptide synthesis (SPPS) and N-carboxyanhydride ring-opening polymerization (NCA-ROP), while green methods remain largely undeveloped. This work demonstrates a protease-catalyzed peptide synthesis (PCPS) capable of directly grafting leucine ethyl ester (Leu-OEt) from the C-terminus of a methoxy poly(ethylene glycol)-phenylalanine ethyl ester macroinitiator in a one-pot, aqueous reaction. By using the natural tendency of the growing hydrophobic peptide segment to self-assemble, a large narrowing of the (Leu)_x distributions for both mPEG₄₅-b-Phe(Leu)_x and oligo(Leu)_x coproducts, relative to oligo(Leu)_x synthesized in the absence of a macroinitiator (mPEG₄₅-Phe-OEt), was achieved. A mechanism is described where in situ β-sheet coassembly of mPEG₄₅-b-Phe(Leu)_x and oligo(Leu)_x coproducts during polymerization prevents peptide hydrolysis, providing a means to control the degree of polymerization (DP) and dispersity of diblock (Leu)_x segments (matrix-assisted laser desorption time-of-flight (MALDI-TOF) x = 5.1, dispersity ≤ 1.02). The use of self-assembly to control the uniformity of peptides synthesized by PCPS paves the way for precise peptide block copolymer architectures with various polymer backbones and amino acid compositions synthesized by a green process.

Protein-Nucleic Acid Conjugation with Sterol Linkers Using Hedgehog Autoprocessing

Hedgehog (Hh) precursor proteins contain an autoprocessing domain called HhC whose native function is protein cleavage and C-terminal glycine sterylation. The transformation catalyzed by HhC occurs in cis from a precursor protein and exhibits wide tolerance toward both sterol and protein substrates. Here, we repurpose HhC as a 1:1 protein-nucleic acid ligase, with the sterol serving as a molecular linker. A procedure is described for preparing HhC-active sterylated DNA, called steramers, using aqueous compatible chemistry and commercial reagents. Steramers have KM values of 7-11 μM and reaction t1/2 values of ∼10 min. Modularity of the HhC/steramer method is demonstrated using four different proteins along with structured and unstructured sterylated nucleic acids. The resulting protein-DNA conjugates retain the native solution properties and biochemical function. Unlike self-tagging domains, HhC does not remain fused to the conjugate; rather, enzymatic activity is mechanistically coupled to conjugate release. That unique feature of HhC, coupled with efficient kinetics and substrate tolerance, may ease access and open new applications for these suprabiological chimeras.