Hydrophobic Moieties Bestow Fast-Folding and Hyperstability on Collagen Triple Helices

Natural Affinity Driven Modification by Silicene to Construct a "Thermal Switch" for Tumorous Bone Loss

Tumorous bone defects present significant challenges for surgical bio-reconstruction due to the dual pathological conditions of residual tumor presence and extensive bone loss following excision surgery. To address this challenge, a "thermal switch" smart bone scaffold based on the silicene nanosheet-modified decalcified bone matrix (SNS@DBM) is developed by leveraging the natural affinity between collagen and silicene, which is elucidated by molecular dynamics simulations. Benefitting from its exceptional photothermal ability, biodegradability, and bioactivity, the SNS@DBM "thermal switch" provides an integrated postoperative sequential thermotherapy for tumorous bone loss by exerting three levels of photothermal stimulation (i.e., strong, moderate, and nonstimulation). During the different phases of postoperative bioconstruction, the SNS@DBM scaffold realizes simultaneous residual tumor ablation, tumor recurrence prevention, and bone tissue regeneration. These biological effects are verified in the tumor-bearing nude mice of patient-derived tissue xenografts and critical cranium defect rats. Mechanism research prompts moderate heat stimulus generated by and coordinating with SNSs can upregulate osteogenic genes, promote macrophages M2 polarization, and intensify angiogenesis of H-type vessels. This study introduces a versatile approach to the management of tumorous bone defects.

Production and Functional Analysis of Collagen Hexapeptide Repeat Sequences in Pichia pastoris

In the development of biomaterials with specific structural domains associated with various cellular activities, the limited integrin specificity of commonly used adhesion sequences, such as the RGD tripeptide, has resulted in an inability to precisely control cellular responses. To overcome this limitation, we conducted multiple replications of the integrin α2β1-specific ligand, the collagen hexapeptide Gly-Phe-Pro-Gly-Glu-Arg (GFPGER) in Pichia pastoris. This enabled the development of recombinant collagen with high biological activity, which was subsequently expressed, isolated, and purified for structural and functional analysis. The proteins carrying the multiple replications GFPGER sequence demonstrated significant bioactivity in cells, leading to enhanced cell adhesion, osteoblast differentiation, and mineralization when compared to control groups. Importantly, these effects were mediated by integrin α2β1. The new collagen constructed in this study is expected to be a biomaterial for regulating specific cell functions and fates.

Controlled Release of Drugs from Extracellular Matrix-Derived Peptide-Based Nanovesicles through Tailored Noncovalent Interactions

Elastin-collagen nanovesicles (ECnV) have emerged as a promising platform for drug delivery due to their tunable physicochemical properties and biocompatibility. The potential of nine distinct ECnVs to serve as drug-delivery vehicles was investigated in this study, and it was demonstrated that various small-molecule cargo (e.g., dexamethasone, methotrexate, doxorubicin) can be encapsulated in and released from a set of ECnVs, with extents of loading and rates of release dictated by the composition of the elastin domain of the ECnV and the type of cargo. Elastin-like peptides (ELPs) and collagen-like peptides (CLPs) of various compositions were produced; the secondary structure of the corresponding peptides was determined using CD, and the morphology and average hydrodynamic diameter (∼100 nm) of the ECnVs were determined using TEM and DLS. It was observed that hydrophobic drugs exhibited slower release kinetics than hydrophilic drugs, but higher drug loading was achieved for the more hydrophilic Dox. The collagen-binding ability of the ECnVs was demonstrated through a 2D collagen-binding assay, suggesting the potential for longer retention times in collagen-enriched tissues or matrices. Sustained release of drugs for up to 7 days was observed and, taken together with the collagen-binding data, demonstrates the potential of this set of ECnVs as a versatile drug delivery vehicle for longer-term drug release of a variety of cargo. This study provides important insights into the drug delivery potential of ECnVs and offers useful information for future development of ECnV-based drug delivery systems for the treatment of various diseases.

Carbohydrate Co-Solutes Stabilize Collagen Triple Helices

Carbohydrates are common co-solutes for the stabilization of proteins. The effect of carbohydrate solutions on the stability of collagen, the most abundant protein in mammals, is, however, underexplored. In this work, we studied the thermal stability of collagen triple helices derived from a molecularly defined collagen model peptide (CMP), Ac-(Pro-Hyp-Gly)7 -NH2 , in solutions of six common mono- and disaccharides. We show that the carbohydrates stabilize the collagen triple helix in a concentration-dependent manner, with an increase of the melting temperature of up to 17 °C. In addition, we show that the stabilizing effect is similar for all studied sugars, including trehalose, which is otherwise considered a privileged bioprotectant. The results provided insight into the effects of sugar co-solutes on collagen triple helices and can aid the selection of storage environments for collagen-based materials and probes.

Collagen Mimicry with a Short Collagen Model Peptide

Mimicking triple helix and fibrillar network of collagen through collagen model peptide(CMP) with short GPO tripeptide repeats is a great challenge. Herein, a minimalistic CMP comprising only five GPO repeats [(GPO)5 ] is presented. This novel approach involves the fusion of ultrashort peptide with the synergetic power of π-system and β-sheet formation to short CMP (GPO)5 . Accordingly, a hydrogel-forming, fluorenylmethoxycarbonyl (Fmoc)-functionalized ultrashort peptide (NFGAIL) is fused at the N-terminus and phenylalanine at the C-terminus of (GPO)5 (Fmoc-NFGAIL-(GPO)5 -F-COOH, FmP-5GPO). At room temperature, it forms a robust triple helix in aqueous buffer solution and has a relatively high melting point of 35 °C. The fluorenyl motif stabilizes the triple helix by aromatic π-π interactions as in its absence, triple helix is not formed. NFGAIL, which forms a β-sheet, also aids in triple helix stabilization via intermolecular hydrogen bonding and hydrophobic interactions. FmP-5GPO forms highly entangled nanofibrils with a micrometer length, which have excellent cell viability. The achievement of stable triple helix and fibrils in such a short CMP(FmP-5GPO) sequence is a challenging feat, and its significance in CMP-based biomaterials is undeniable. The present strategy highlights the potential for developing new CMP sequences through intelligent tuning of fusion peptides and GPO repeats.

Harnessing the power of a photoinitiated thiol-ene "click" reaction for the efficient synthesis of S-lipidated collagen model peptide amphiphiles

A photoinitiated thiol-ene "click" reaction was used to synthesize S-lipidated collagen model peptide amphiphiles. Use of 2-iminothiolane provided an epimerization-free thiol handle required for thiol-ene based incorporation of lipid moieties onto collagen-based peptide sequences. This approach not only led to improvements in the triple helical characteristics of the resulting collagen model peptides but also increased the aqueous solubility of the peptide amphiphiles. As a result, this methodology holds significant potential for the design and advancement of functional peptide amphiphiles, offering enhanced capabilities across a wide range of applications.

Isonitrile-Proline - A Versatile Handle for the Chemoselective Derivatization of Collagen Peptides

Functional groups that allow for chemoselective and bioorthogonal derivatization are valuable tools for the labelling of peptides and proteins. The isonitrile is such a group but synthetic methods for its incorporation into peptides by solid-phase peptide synthesis are not known. Here, we introduce (4S)- and (4R)-isonitrileproline (Inp) as building blocks for solid-phase peptide synthesis. Conformational studies of (4S)- and (4R)-Inp and thermal stability analysis of Inp-containing collagen triple helices revealed that the isonitrile group exerts a stereoelectronic gauche effect. We showcase the value of Inp for bioorthogonal labelling by derivatization of Inp-containing collagen model peptides (CMPs). Dual labelling with a pair of bioorthogonal reactions of a CMP containing Inp and azidoproline residues further highlights the versatility of the new isonitrile-containing amino acids.

The Yin and Yang of How N-Terminal Acyl Caps Affect Collagen Triple Helices

N-terminal acylation is a common tool for the installation of functional moieties (e.g., sensors or bioactive molecules) on collagen model peptides (CMPs). The N-acyl group and its length are generally assumed to have little or no influence on the properties of the collagen triple helix formed by the CMP. Here, we show that the length of short (C1-C4) acyl capping groups has different effects on the thermal stability of collagen triple helices in POG, OGP, and GPO frames. While the effect of different capping groups on the stability of triple helices in the GPO frame is negligible, longer acyl chains stabilize OGP triple helices but destabilize POG analogues. The observed trends arise from a combination of steric repulsion, the hydrophobic effect, and n → π* interactions. Our study provides a basis for the design of N-terminally functionalized CMPs with predictable effects on triple helix stability.

Association between N-Terminal Pyrenes Stabilizes the Collagen Triple Helix

Collagen model peptides featuring the fluorophore pyrene at their N-termini have been synthesized, and their thermal denaturation has been examined using circular dichroism (CD) and fluorescence spectroscopies. Flanking the (Pro-Hyp-Gly)7 core of the peptide monomers at positions 1 and/or 23 in the primary sequence, Lys residues were introduced to ensure water solubility. Triple helices derived from such peptides show a broad excimer emission at ∼480 nm, indicative of interaction between the pyrene units. CD experiments show that the fluorophores enhance helix stability primarily through entropic effects. Unfolding temperatures (Tm) increase by up to 7 °C for systems with N-terminal lysine residues and by up to 21 °C for systems in which the first-position Lys is replaced by Ala. Tm values derived from fluorescence measurements (at 50 μM) typically lie within ∼1 °C of those obtained using CD (at 200 μM). Computational modeling in a water continuum using B3LYP-GD3 and M06-2X functionals predicts that face-to-face association of fluorophores can occur while H-bonding within the [(POG)n]3 assembly is retained. Such parallel stacking is consistent with hydrophobically driven stabilization. Labeling collagen peptides with pyrene is a synthetically simple way to promote triple helicity while providing a means to obtain Tm data on relatively dilute samples.

The Chemistry and Biology of Collagen Hybridization

Collagen provides mechanical and biological support for virtually all human tissues in the extracellular matrix (ECM). Its defining molecular structure, the triple-helix, could be damaged and denatured in disease and injuries. To probe collagen damage, the concept of collagen hybridization has been proposed, revised, and validated through a series of investigations reported as early as 1973: a collagen-mimicking peptide strand may form a hybrid triple-helix with the denatured chains of natural collagen but not the intact triple-helical collagen proteins, enabling assessment of proteolytic degradation or mechanical disruption to collagen within a tissue-of-interest. Here we describe the concept and development of collagen hybridization, summarize the decades of chemical investigations on rules underlying the collagen triple-helix folding, and discuss the growing biomedical evidence on collagen denaturation as a previously overlooked ECM signature for an array of conditions involving pathological tissue remodeling and mechanical injuries. Finally, we propose a series of emerging questions regarding the chemical and biological nature of collagen denaturation and highlight the diagnostic and therapeutic opportunities from its targeting.

Hollow Octadecameric Self-Assembly of Collagen-like Peptides

The folding of collagen is a hierarchical process that starts with three peptides associating into the characteristic triple helical fold. Depending on the specific collagen in question, these triple helices then assemble into bundles reminiscent of α-helical coiled-coils. Unlike α-helices, however, the bundling of collagen triple helices is very poorly understood with almost no direct experimental data available. In order to shed light on this critical step of collagen hierarchical assembly, we have examined the collagenous region of complement component 1q. Thirteen synthetic peptides were prepared to dissect the critical regions allowing for its octadecameric self-assembly. We find that short peptides (under 40 amino acids) are able to self-assemble into specific (ABC)6 octadecamers. This requires the ABC heterotrimeric composition as the self-assembly subunit, but does not require disulfide bonds. Self-assembly into this octadecamer is aided by short noncollagenous sequences at the N-terminus, although they are not entirely required. The mechanism of self-assembly appears to begin with the very slow formation of the ABC heterotrimeric helix, followed by rapid bundling of triple helices into progressively larger oligomers, terminating in the formation of the (ABC)6 octadecamer. Cryo-electron microscopy reveals the (ABC)6 assembly as a remarkable, hollow, crown-like structure with an open channel approximately 18 Å at the narrow end and 30 Å at the wide end. This work helps to illuminate the structure and assembly mechanism of a critical protein in the innate immune system and lays the groundwork for the de novo design of higher order collagen mimetic peptide assemblies.

Inviting C5-Trifluoromethylated Pseudoprolines into Collagen Mimetic Peptides

Numerous collagen mimetic peptides (CMPs) have been engineered using proline derivatives substituted at their C(3) and/or C(4) position in order to stabilize or functionalize collagen triple-helix mimics. However, no example has been reported so far with C(5) substitutions. Here, we introduce a fluorinated CMP incorporating trifluoromethyl groups at the C(5) position of pseudoproline residues. In tripeptide models, our CD, NMR, and molecular dynamics (MD) studies have shown that, when properly arranged, these residues meet the structural requirements for a triple-helix assembly. Two host-guest CMPs were synthesized and analyzed by CD spectroscopy. The NMR analysis in solution of the most stable confirmed the presence of structured homotrimers that we interpret as triple helices. MD calculations showed that the triple-helix model remained stable throughout the simulation with all six trifluoromethyl groups pointing outward from the triple helix. Pseudoprolines substituted at the C(5) positions appeared as valuable tools for the design of new fluorinated collagen mimetic peptides.

Influence of surface properties on the adhesion of bacteria onto different casings

Bacteria adhere to the surfaces of sausage casing and form biofilms, which causes food spoilage and quality deterioration. However, bacterial adhesion to the casing surfaces has not received enough attention and has not been extensively studied. In this study, the effect of the physicochemical properties of casing surfaces on bacterial initial adhesion were investigated with Leuconostoc mesenteroides as model bacteria. The adhesion of Leuconostoc mesenteroides onto 5 types of casings were systematically investigated, including animal casings, collagen casings, cellulose casings, fiber casings, and nylon casings, which are the most frequently encountered casings in sausage processing. It was found that the number of viable cells on the casings following the trend as: animal casings > collagen casings > fiber casings > cellulose casings > nylon casings after 4 h of incubation time. This phenomenon might be due to the different physicochemical properties of the different casings. Therefore, physicochemical factors, including zeta potential, hydrophobicity and roughness of casings, zeta potential and hydrophobicity of Leuconostoc mesenteroides, were further characterized. In terms of hydrophobic interactions, the results showed that the number of bacteria attached to the casings did not conform to the trend of hydrophobic interaction. In terms of electrostatic interactions, the results showed that the number of bacteria attached to the casings did not conform to the trend of hydrophobic interaction. The casings with different surface roughnesses in a range of 1.67-20.83 μm, the variation of bacterial adhesion quantity was in good agreement with the variation trend of casing roughness, the result showed that the surface roughness was the key factor dominating the bacterial adhesion rate compared with the surface hydrophobicity and zeta potential. The results give new insights to explore the mechanism of bacterial adhesion on casings and prevent sausage spoilage.

Frame Shifts Affect the Stability of Collagen Triple Helices

Collagen model peptides (CMPs), composed of proline-(2S,4R)-hydroxyproline-glycine (POG) repeat units, have been extensively used to study the structure and stability of triple-helical collagen─the dominant structural protein in mammals─at the molecular level. Despite the more than 50-year history of CMPs and numerous studies on the relationship between the composition of single-stranded CMPs and the thermal stability of the assembled triple helices, little attention has been paid to the effects arising from their terminal residues. Here, we show that frame-shifted CMPs, which share POG repeat units but terminate with P, O, or G, form triple helices with vastly different thermal stabilities. A melting temperature difference as high as 16 °C was found for triple helices from 20-mers Ac-OG[POG]₆-NH₂ and Ac-[POG]₆PO-NH₂, and triple helices of the constitutional isomers Ac-[POG]₇-NH₂ and Ac-[GPO]₇-NH₂ melt 10 °C apart. A combination of thermal denaturation, circular dichroism and NMR spectroscopic studies, and molecular dynamics simulations revealed that the stability differences originate from the propensity of the peptide termini to preorganize into a polyproline-II helical structure. Our results advise that care must be taken when designing peptide mimics of structural proteins, as subtle changes in the terminal residues can significantly affect their properties. Our findings also provide a general and straightforward tool for tuning the stability of CMPs for applications as synthetic materials and biological probes.

Peptide-based assembled nanostructures that can direct cellular responses

Natural originated materials have been well-studied over the past several decades owing to their higher biocompatibility compared to the traditional polymers. Peptides, consisting of amino acids, are among the most popular programable building blocks, which is becoming a growing interest in nanobiotechnology. Structures assembled using those biomimetic peptides allow the exploration of chemical sequences beyond those been routinely used in biology. In this Review, we discussed the most recent experimental discoveries on the peptide-based assembled nanostructures and their potential application at the cellular level such as drug delivery. In particular, we explored the fundamental principles of peptide self-assembly and the most recent development in improving their interactions with biological systems. We believe that as the fundamental knowledge of the peptide assemblies evolves, the more sophisticated and versatile nanostructures can be built, with promising biomedical applications.

Construction of Unsaturated Collagen Microsphere System Based on Hydrogen/Coordination Bond and Application

In this paper, unsaturated collagen microspheres (CMA-Cr/ST) were constructed from vinyl collagen (CMA, which is from leather solid waste) and chromium/synthetic tannins (Cr/ST) through hydrogen and coordination bonds and grafted on polyamide nonwoven fiber by thiol-ene click chemistry to improve the moisture absorption and permeability of nonwoven. The results showed that when the quality ratio of CMA to Cr/ST was 1:1, the magnetic stirring time was 20 min with 250 rpm at room temperature, the surface and particle size distribution of the obtained microspheres were smooth and relatively uniform, and the average particle size was 2-3 μm. When the concentrations of the microspheres and the initiators were 6 and 0.006 wt %, the irradiation time was 4 h and the grafting rate of CMA-Cr/ST on the surface of polyamide fibers would reach 31.3%. The moisture absorption and permeability of the obtained microsphere-modified polyamide nonwoven fiber (CMA-Cr/ST-S-PA) were increased. It was found that the collagen microspheres were firmly modified on the polyamide fibers by moisture and heat resistance, wash resistance, and solvent resistance studies.

van der Waals interactions to control amide cis–trans isomerism

We discover the presence of local van der Waals (vdW) interactions at the cis amide bond in crystals of isobutyroyl–Pro–Val–OMe.

Infrared harmonic features of collagen models at B3LYP-D3: From amide bands to the THz region

In this paper, we have studied the vibrational spectral features for the collagen triple helix using a dispersion corrected hybrid density functional theory (DFT-D) approach. The protein is simulated by an infinite extended polymer both in the gas phase and in a water micro-solvated environment. We have adopted proline-rich collagen models in line with the high content of proline in natural collagens. Our scaled harmonic vibrational spectra are in very good agreement with the experiments and allow for the peak assignment of the collagen amide I and III bands, supporting or questioning the experimental interpretation by means of vibrational normal modes analysis. Furthermore, we demonstrated that IR spectroscopy in the THz region can detect the small variations inherent to the triple helix helicity (10/3 over 7/2), thus elucidating the packing state of the collagen. So far, identifying the collagen helicity is only possible by means of crystal x-ray diffraction.

Influence of Lipidation on the Folding and Stability of Collagen Triple Helices-An Experimental and Theoretical Study

The folding of triple-helical collagen, the most abundant protein in nature, relies on the nucleation and propagation along the strands. Hydrophobic moieties are crucial for the folding and stability of numerous proteins. Instead, nature uses for collagen a trimerization domain and cis-trans prolyl isomerases to facilitate and accelerate triple helix formation. Yet, pendant hydrophobic moieties endow triple-helical collagen with hyperstability and accelerate the cis-trans isomerization to an extent that thermally induced unfolding and folding of collagen triple helices take place at the same speed. Here, we systematically explored the effect of pendant fatty acids on the folding and stability of collagen triple helices. Thermal denaturation and kinetic studies with a series of collagen mimetic peptides (CMPs) bearing saturated and unsaturated fatty acids with different lengths revealed that longer and more flexible fatty acid appendages increase the stability and the folding rate of collagen triple helices. Molecular dynamics simulations combined with experimental data indicate that the hydrophobic appendages stabilize the triple helix by interaction with the grooves of the collagen triple helix and accelerate the folding and unfolding process by creating a molten globule-like intermediate.

Oligodimethylsiloxane-Oligoproline Block Co-Oligomers: the Interplay between Aggregation and Phase Segregation in Bulk and Solution

Discrete block co-oligomers (BCOs) assemble into highly ordered nanostructures, which adopt a variety of morphologies depending on their environment. Here, we present a series of discrete oligodimethylsiloxane-oligoproline (oDMS-oPro) BCOs with varying oligomer lengths and proline end-groups, and study the nanostructures formed in both bulk and solution. The conjugation of oligoprolines to apolar siloxanes permits a study of the aggregation behavior of oligoproline moieties in a variety of solvents, including a highly apolar solvent like methylcyclohexane. The apolar solvent is more reminiscent of the polarity of the siloxane bulk, which gives insights into the supramolecular interactions that govern both bulk and solution assembly processes of the oligoproline. This extensive structural characterization allows the bridging of the gap between solution and bulk assembly. The interplay between the aggregation of the oligoproline block and the phase segregation induced by the siloxane drives the assembly. This gives rise to disordered, micellar microstructures in apolar solution and crystallization-driven lamellar nanostructures in the bulk. While most di- and triblock co-oligomers adopt predictable morphological features, one of them, oDMS15-oPro6-NH2, exhibits pathway complexity leading to gel formation. The pathway selection in the complex interplay between aggregation and phase segregation gives rise to interesting material properties.

Insertion of Pro-Hyp-Gly provides 2 kcal mol-1 stability but attenuates the specific assembly of ABC heterotrimeric collagen triple helices

Collagen is a major structural component of the extracellular matrix and connective tissue. The key structural feature of collagen is the collagen triple helix, with a Xaa-Yaa-Gly (glycine) repeating pattern. The most frequently occurring triplet is Pro (proline)-Hyp (hydroxyproline)-Gly. The reversible thermal folding and unfolding of a series of heterotrimeric collagen triple helices with varying number of Pro-Hyp-Gly triplets were monitored by circular dichroism spectroscopy to determine the unfolding thermodynamic parameters Tm (midpoint transition temperature), ΔHTm (unfolding enthalpy), and ΔGunfold (unfolding free energy). The Tm and ΔGunfold of the heterotrimeric collagen triple helices increased with increasing number of Pro-Hyp-Gly triplets. The ΔGunfold increased by 2.0 ± 0.2 kcal mol-1 upon inserting one Pro-Hyp-Gly triplet into all three chains. The Tm difference between the most stable ABC combination and the second most stable BCC combination decreased with increasing number of Pro-Hyp-Gly triplets, even though the ΔGunfold difference remained the same. These results should be useful for tuning the stability of collagen triple helical peptides for hydrogel formation, recognition of denatured collagen triple helices as diagnostics and therapeutics, and targeted drug delivery.

Triple-Helix-Stabilizing Effects in Collagen Model Peptides Containing PPII-Helix-Preorganized Diproline Modules

Collagen model peptides (CMPs) serve as tools for understanding stability and function of the collagen triple helix and have a potential for biomedical applications. In the past, interstrand cross-linking or conformational preconditioning of proline units through stereoelectronic effects have been utilized in the design of stabilized CMPs. To further study the effects determining collagen triple helix stability we investigated a series of CMPs containing synthetic diproline-mimicking modules (ProMs), which were preorganized in a PPII-helix-type conformation by a functionalizable intrastrand C2 bridge. Results of CD-based denaturation studies were correlated with calculated (DFT) conformational preferences of the ProM units, revealing that the relative helix stability is mainly governed by an interplay of main-chain preorganization, ring-flip preference, adaptability, and steric effects. Triple helix integrity was proven by crystal structure analysis and binding to HSP47.

Cyclic Peptide Mimetic of Damaged Collagen

Collagen is the most abundant protein in humans and the major component of human skin. Collagen mimetic peptides (CMPs) can anneal to damaged collagen in vitro and in vivo. A duplex of CMPs was envisioned as a macromolecular mimic for damaged collagen. The duplex was synthesized on a solid support from the amino groups of a lysine residue and by using olefin metathesis to link the N termini. The resulting cyclic peptide, which is a monomer in solution, binds to CMPs to form a triple helix. Among these, CMPs that are engineered to avoid the formation of homotrimers but preorganized to adopt the conformation of a collagen strand exhibit enhanced association. Thus, this cyclic peptide enables the assessment of CMPs for utility in annealing to damaged collagen. Such CMPs have potential use in the diagnosis and treatment of fibrotic diseases and wounds.

Elucidating the Nature of Interactions in Collagen Triple-Helix Wrapping

Collagen is the most abundant protein family in the animal kingdom. Its structural motif envisages three polypeptide chains coiled in the so-called collagen triple helix. Depending on the triplet amino acid sequence of the chains, collagen has different helical arrangements. Such atomic-scale structural variations have a large impact on the large-scale structure of collagen. In this Letter, we elucidate the interactions that are responsible for a specific helical pattern of the collagen protein by means of DFT-D-based computer simulations. We demonstrate that interchain interactions and solvation effects stabilize compact helices over elongated ones. Conversely, elongated helices are stabilized by less geometrical strain and entropic factors. Our computational procedure predicts the collagen helical pattern in agreement with the experimental evidence.

Temperature-controlled electrospray ionization mass spectrometry as a tool to study collagen homo- and heterotrimers

Collagen model peptides are useful for understanding the assembly and structure of collagen triple helices. The design of self-assembling heterotrimeric helices is particularly challenging and often affords mixtures of non-covalent assemblies that are difficult to characterize by conventional NMR and CD spectroscopic techniques. This can render a detailed understanding of the factors that control heterotrimer formation difficult and restrict rational design. Here, we present a novel method based on electrospray ionization mass spectrometry to investigate homo- and heterotrimeric collagen model peptides. Under native conditions, the high resolving power of mass spectrometry was used to access the stoichiometric composition of different triple helices in complex mixtures. A temperature-controlled electrospray ionization source was built to perform thermal denaturation experiments and provided melting temperatures of triple helices. These were found to be in good agreement with values obtained from CD spectroscopic measurements. Importantly, for mixtures of coexisting homo- and heterotrimers, which are difficult to analyze by conventional methods, our technique allowed for the identification and monitoring of the unfolding of each individual species. Their respective melting temperatures could easily be accessed in a single experiment, using small amounts of sample.

Stabilization of the triple helix in collagen mimicking peptides

Collagen mimics are peptides designed to reproduce structural features of natural collagen. A triple helix is the first element in the hierarchy of collagen folding. It is an assembly of three parallel peptide chains stabilized by packing and interchain hydrogen bonds. In this review we summarize the existing chemical approaches towards stabilization of this structure including the most recent developments. Currently proposed methods include manipulation of the amino acid composition, application of unnatural amino acid analogues, stimuli-responsive modifications, chain tethering approaches, peptide amphiphiles, modifications that target interchain interactions and more. This ability to manipulate the triple helix as a supramolecular self-assembly contributes to our understanding of the collagen folding. It also provides essential information needed to design collagen-based biomaterials of the future.