para-Selective C-H Olefination of Aniline Derivatives via Pd/S,O-Ligand Catalysis

Ligand-Enabled ortho-Selective C-H Olefination of Tertiary Aniline Derivatives

A highly ortho-selective CAr-H olefination of tertiary anilines without a directing group was developed. This reaction tolerated various substituted arenes and olefin coupling partners, affording ortho-olefination products in moderate to good yields. Preliminary mechanistic studies showed that N-Ac-d-Ala, Ag2CO3, and BQ were the key factors for tuning the regioselectivity from para to ortho. Density functional theory was used to achieve a theoretical understanding of the ortho selectivity.

RhRu Bimetallic Oxide Cluster Catalysts for Cross-Dehydrogenative Coupling of Arenes and Carboxylic Acids

Noble-metal-based bimetallic oxide clusters are promising novel catalysts. In this study, we developed carbon-supported RhRu bimetallic oxide clusters (RhRuOx/C) with a mean diameter of 1.2 nm, which showed remarkable catalytic activity for the cross-dehydrogenative coupling (CDC) of arenes and carboxylic acids with O2 as the sole oxidant. RhRu bimetallic oxide cluster formation was confirmed by aberration-corrected high-angle annular dark-field scanning transmission electron microscopy with energy-dispersive X-ray spectroscopy and synchrotron X-ray absorption spectroscopy. Kinetic isotope and substituent effects indicated that arene C-H bond cleavage was the rate-determining step and proceeded via electrophilic concerted metalation-deprotonation mechanism, with a carboxylate as an internal base. Density functional theory calculations supported the proposed mechanism and indicated that the active center for C-H bond activation was Rh(V) rather than Rh(III), while Ru enhanced the electrophilicity of the Rh(V) site by decreasing the negative charge of the surrounding oxygen atoms. Electron-rich arenes showed relatively high reactivity for the RhRuOx/C-catalyzed CDC reaction, and both aliphatic and aromatic carboxylic acids were applicable to the reaction. The RhRuOx/C catalyst is promising for the CDC reaction of arenes and carboxylic acids to produce aryl esters. This work promotes the development of noble-metal-based bimetallic oxide clusters for C-H bond activation reactions.

Understanding the Regiodivergence between Hydroarylation and Trifluoromethylarylation of 1,3-Dienes Using Anilines in HFIP

Conjugated dienes (1,3-dienes) are versatile and valuable chemical feedstocks that can be used as two-carbon or four-carbon synthons with vast applications across the chemical industry. However, the main challenge for their productive incorporation in synthetic routes is their chemo-, regio-, and stereoselective functionalization. Herein, we introduce a unified strategy for the 1,2-hydroarylation and 1,4-trifluoromethylarylation of 1,3-dienes using anilines in hexafluoroisopropanol. DFT calculations point toward a kinetically controlled process in both transformations, particularly in the trifluoromethylarylation, to explain the regiodivergent outcome. In addition, we perform an extensive program of functionalization and diversification of the products obtained, including hydrogenation, oxidation, cyclizations, or cross-coupling reactions, that allows access to a library of high-value species in a straightforward manner.

Non-Directed C-H Arylation of Anisole Derivatives via Pd/S,O-Ligand Catalysis

Non-directed C-H arylation is one of the most efficient methods to synthesize biaryl compounds without the need of the prefuctionalization of starting materials, or the installment and removal of directing groups on the substrate. A direct C-H arylation of simple arenes as limiting reactants remains a challenge. Here we disclose a non-directed C-H arylation of anisole derivatives as limiting reagents with aryl iodides under mild reaction conditions. The arylated products are obtained in synthetically useful yields and the arylation of bioactive molecules is also demonstrated. Key to the success of this methodology is the use of a one-step synthesized S,O-ligand.

Palladium(II)-catalyzed annulation of N-methoxy amides and arynes: computational mechanistic insights and substituents effects

CONTEXT

The combined use of transition metal-catalyzed C-H activation with aryne annulation reactions has emerged as an important strategy in organic synthesis. In this study, the mechanisms of the palladium(II)-catalyzed annulation reaction of N-methoxy amides and arynes were computationally investigated by density functional theory. The role of methoxy amide as a directing group was elucidated through the calculation of three different pathways for the C-H activation step, showing that the pathway where amide nitrogen acts as a directing group is preferable. At the reductive elimination transition state, an unstable seven-membered ring is formed preventing the lactam formation. A substituent effect study based on an NBO analysis, Hammet, and using a More O'Ferall-Jenks plot indicates that the C-H activation step proceeds via an electrophilic concerted metalation-deprotonation (eCMD) mechanism. The results show that electron-withdrawing groups increase the activation barrier and contribute to an early Pd-C bond formation and a late C-H bond breaking when compared with electron-donating substituents. Our computational results are in agreement with the experimental data provided in the literature.

METHODS

All calculations were performed using Gaussian 16 software. Geometry optimizations, frequency analyses at 393.15 K, and IRC calculations were conducted at the M06L/Def2-SVP level of theory. Corrected electronic energies, NBO charges, and Wiberg bond indexes were computed at the M06L/Def2-TZVP//M06L/Def2-SVP level of theory. Implicit solvent effects were considered in all calculations using the SMD model, with acetonitrile employed as the solvent.

Ligand Promoted Pd-Catalyzed High para-Selective C-H Olefination

Achieving high para-selective C-H functionalized products of benzoic acid derivatives using a designed template is still a daunting challenge because the carbonyl group also could coordinate with metal to activate the ortho-C-H bond. Herein, we report the ligand promoted high para-selective C-H olefination of benzoic acid derivatives; we screened a series of ligands increasing the ratio of p:others from 62:38 to 96:4. This work may find application in the construction of para-substituted benzoic acid derivatives.

meta-C-H Arylation of Aniline Derivatives via Palladium/ S,O-Ligand/Norbornene Cooperative Catalysis

Aromatic amines are ubiquitous moieties in organic molecules and their direct functionalization is of great interest in many research areas due to their prevalence in pharmaceuticals and organic electronics. While several synthetic tools exist for the ortho- and para-functionalization of anilines, the functionalization of the less reactive meta-position is not easy to achieve with current methods. To date, the meta-C-H arylation of aniline derivatives has been restricted to either the use of directing groups & templates, or their transformation into anilides & quaternary anilinium salts. Herein, we report the first general and efficient meta-C-H-arylation of non-directed aniline derivatives via cooperative catalysis with a palladium-S,O-ligand-norbornene system. The reaction proceeds under mild conditions with a wide range of aniline derivatives and aryl iodides, while being operationally simple and scalable. Our preliminary mechanistic investigation-including the isolation of several palladium complexes and deuterium experiments-reveal useful insights into the substituent-effects of both the aniline-substrate and the norbornene-mediator during the meta-C-H activation step.

Merging Visible Light Photocatalysis and P(III)-Directed C-H Activation by a Single Catalyst: Modular Assembly of P-Alkyne Hybrid Ligands

Metal-catalyzed C-H activation strategies provide an efficient approach for synthesis by minimizing atom, step, and redox economy. Developing milder, greener, and more effective protocols for these strategies is always highly desirable to the scientific community. In this study, the utilization of a single rhodium complex enabled the visible-light-induced late-stage C-H activation of biaryl-type phosphines with alkynyl bromides, employing inherent phosphorus atoms as directing groups. This chemistry combines P(III)-directed C-H activation with visible light photocatalysis, under exogenous photosensitizer-free conditions, offering a unique platform for ligand design and preparation. Furthermore, this study also explores the asymmetric catalysis and coordination chemistry of the resulting P-alkyne hybrid ligands with specific transition metals. Experimental results and density functional theory calculations demonstrate the mechanistic intricacies of this transformation.

Trifluoromethylarylation of alkenes using anilines

Nitrogen containing compounds, such as anilines, are some of the most widespread and useful chemical species, although their high and unselective reactivity has prevented their incorporation into many interesting transformations, such as the functionalization of alkenes. Herein we report a method that allows the trifluoromethylarylation of alkenes using anilines, for the first time, with no need for additives, transition metals, photocatalysts or an excess of reagents. An in-depth mechanistic study reveals the key role of hexafluoroisopropanol (HFIP) as a unique solvent, establishing a hydrogen bonding network with aniline and trifluoromethyl reagent, that is responsible for the altered reactivity and exquisite selectivity. This work uncovers a new mode of reactivity that involves the use of abundant anilines as a non-prefunctionalized aromatic source and the simultaneous activation of trifluoromethyl hypervalent iodine reagent.

Controlling Reactivity and Selectivity in the Nondirected C-H Activation of Arenes with Palladium

ConspectusAromatic structures are widespread motifs throughout organic chemistry, and C-H activation has been recognized as a major tool for enabling their sustainable and efficient functionalization. Through C-H activation, arenes can be modified without the need for prefunctionalization, leading to inherent atom- and step-economic advantages over traditional methods. However, for the development of synthetically useful methods, several hurdles have to be overcome. The strength of C-H bonds necessitates the development of sufficiently reactive catalysts, while the presence of multiple C-H bonds within a substrate poses challenges in terms of site-selectivity. Traditionally these challenges have been addressed by substrate control. By attaching different directing groups (DGs), the reactivity of the respective arene was significantly enhanced and the DG guided the metal in close proximity to specific C-H bonds, resulting in high site-selectivity. However, the introduction and removal of the DG add additional steps to the synthetic sequence, and the scope of the reaction is limited to a specific substrate class. The development of complementary nondirected methods that can be applied to a broad range of arenes without the necessity to carry a specific functional group that coordinates to Pd (referred to as simple arenes) is therefore highly desirable. However, the intrinsically lower reactivity of such substrates and the absence of a selectivity-determining DG pose significant challenges that can be solved only by the development of highly efficient catalysts. Consequently, the field of nondirected C-H activation, especially with respect to Pd-catalyzed methods, remained comparatively underdeveloped when we initiated our research program in 2017. At that time, state-of-the-art methods required the arene to be used in large excess, precluding its use in late-stage functionalization. Since organopalladium species are among the most versatile synthetic intermediates, we realized that developing a system, which can effectively and selectively activate C-H bonds in simple arenes with the arene as the limiting reagent, would be a powerful tool in synthetic organic chemistry. This account summarizes our groups' research toward the development and application of catalytic systems offering this desired reactivity and focuses explicitly on Pd-catalyzed nondirected C-H functionalization reactions of arenes, where the arene is employed as a limiting reagent. After an introduction that summarizes the state of Pd-catalyzed C-H activation of arenes before 2017 and the associated challenges, experimental and mechanistic details about the development of the first arene-limited, nondirected C-H functionalization of simple arenes with palladium will be discussed. This reactivity was enabled by the identification and combination of two complementary ligands, an N-heterocycle and an amino acid-derived ligand. Afterward we will discuss the expansion of this dual-ligand approach to further arene-limited transformations. Finally, we describe two methodologies that originated from the observations we made during our studies, namely, the late-stage deuteration of simple arenes and a highly selective olefination method that uses noncovalent interactions to induce meta selectivity.

Direct C(3)5-H Polyfluoroarylation of 2-Amino/alkoxy Pyridines Enabled by a Transient and Electron-deficient Palladium Intermediate

Herein, we present an unprecedented azine-limited C5-H polyfluoroarylation of 2-aminopyridines enabled by a transient and electron-deficient perfluoroaryl-Pd species via C-H/C-H coupling. The protocol further allows C3(5)-H polyfluoroarylation of 2-alkoxypyridines guided by sterics and electronics for the first time. The late-stage C-H functionalization of drugs, drug derivatives, and natural product derivatives and synthesis of C5-aryl drug derivatives further demonstrated the method's utility. The preliminary mechanistic studies reveal that the synergistic combination of the bulky yet electrophilic perfluoroaryl-Pd species and the partial nucleophilicity of the C5-position of 2-amino/alkoxy-pyridines is the origin of reactivity and selectivity. Importantly, the first experimental evidence for the role of diisopropyl sulfide is provided.

Electrocatalyzed direct arene alkenylations without directing groups for selective late-stage drug diversification

Electrooxidation has emerged as an increasingly viable platform in molecular syntheses that can avoid stoichiometric chemical redox agents. Despite major progress in electrochemical C-H activations, these arene functionalizations generally require directing groups to enable the C-H activation. The installation and removal of these directing groups call for additional synthesis steps, which jeopardizes the inherent efficacy of the electrochemical C-H activation approach, leading to undesired waste with reduced step and atom economy. In sharp contrast, herein we present palladium-electrochemical C-H olefinations of simple arenes devoid of exogenous directing groups. The robust electrocatalysis protocol proved amenable to a wide range of both electron-rich and electron-deficient arenes under exceedingly mild reaction conditions, avoiding chemical oxidants. This study points to an interesting approach of two electrochemical transformations for the success of outstanding levels of position-selectivities in direct olefinations of electron-rich anisoles. A physical organic parameter-based machine learning model was developed to predict position-selectivity in electrochemical C-H olefinations. Furthermore, late-stage functionalizations set the stage for the direct C-H olefinations of structurally complex pharmaceutically relevant compounds, thereby avoiding protection and directing group manipulations.

Heterogeneous V2O5/TiO2-Mediated Photocatalytic Reduction of Nitro Compounds to the Corresponding Amines under Visible Light

The hydrogenation of nitro compounds to their corresponding amines is developed using a heterogeneous and recyclable catalyst (V₂O₅/TiO₂) under irradiation of blue LED (9 W) at ambient temperature. Hydrazine hydrate is used as a reductant and ethanol is used as a solvent, facilitating green, sustainable, low-cost production. The synthesis of 32 (hetero)arylamines and their pharmaceutically relevant molecules (five) are described. Significant features of the protocol include catalyst recyclability, green solvent, ambient temperature, and gram-scale reactions. Among the other aspects studied are ¹H-NMR-assisted reaction progress monitoring, control experiments for mechanistic studies, protocol applications, and recyclability studies. Furthermore, the developed protocol enabled wide functional group tolerance, chemo-selectivity, high yield, and low-cost, sustainable, and environmentally benign synthesis.

Dual-Ligand Catalyst for the Nondirected C-H Olefination of Heteroarenes

Pd(II)-catalyzed nondirected C-H functionalization of heteroarenes is a significant challenge for the following reasons: poor reactivity of electron-deficient heterocycles and the unproductive coordination of Lewis basic nitrogen atoms. Existing methodologies using palladium catalysis often employ a large excess of heterocycle substrates to overcome these hurdles. Despite recent advances in nondirected functionalization of arenes that allow them to be used as limiting reagents, the reaction conditions are incompatible with electron-deficient heteroarenes. Herein we report a dual-ligand catalyst that enables Pd(II)-catalyzed nondirected C-H olefination of heteroarenes without using a large excess of substrate. In general, the use of 1-2 equiv of substrates was sufficient to obtain synthetically useful yields. The reactivity was rationalized by the synergy between two types of ligands: a bidentate pyridine-pyridone ligand promotes C-H cleavage; the monodentate heterocycle substrate acts as a second ligand to form a cationic Pd(II) complex that has high affinity for arenes. The proposed dual-ligand cooperation is supported by a combination of X-ray, kinetics, and control experiments.

Mechanistic studies of the palladium-catalyzed S,O-ligand promoted C-H olefination of aromatic compounds

Pd-catalyzed C-H functionalization reactions of non-directed substrates have recently emerged as an attractive alternative to the use of directing groups. Key to the success of these transformations has been the discovery of new ligands capable of increasing both the reactivity of the inert C-H bond and the selectivity of the process. Among them, a new type of S,O-ligand has been shown to be highly efficient in promoting a variety of Pd-catalyzed C-H olefination reactions of non-directed arenes. Despite the success of this type of S,O-ligand, its role in the C-H functionalization processes is unknown. Herein, we describe a detailed mechanistic study focused on elucidating the role of the S,O-ligand in the Pd-catalyzed C-H olefination of non-directed arenes. For this purpose, several mechanistic tools, including isolation and characterization of reactive intermediates, NMR and kinetic studies, isotope effects and DFT calculations have been employed. The data from these experiments suggest that the C-H activation is the rate-determining step in both cases with and without the S,O-ligand. Furthermore, the results indicate that the S,O-ligand triggers the formation of more reactive Pd cationic species, which explains the observed acceleration of the reaction. Together, these studies shed light on the role of the S,O-ligand in promoting Pd-catalyzed C-H functionalization reactions.

Dual ligand approach increases functional group tolerance in the Pd-catalysed C-H arylation of N-heterocyclic pharmaceuticals

The excellent functional group tolerance of the Suzuki-Miyaura cross-coupling reactions has been decisive for their success in the pharmaceutical industry. Highly diversified (hetero)aromatic scaffolds can be effectively coupled in the final step(s) of a convergent synthetic route. In contrast, electrophilic Pd catalysts for non-directed C-H activation are particularly sensitive to inhibition by coordinating groups in pharmaceutical precursors. While C-H arylation enables the direct conversion of (hetero)aromatics without preinstalled functional or directing groups, its functional group tolerance should be increased to be viable in late-stage cross-couplings. In this work, we report on a dual ligand approach that combines a strongly coordinating phosphine ligand with a chelating 2-hydroxypyridine for the highly robust C-H coupling of bicyclic N-heteroaromatics with aryl bromide scaffolds. The catalyst speciation was studied via in situ XAS measurements, confirming the coordination of both ligands under the reaction conditions. The C-H activation catalyst was shown to be tolerant to a wide range of pharmaceutically relevant scaffolds, including examples of late-stage functionalization of known drug molecules.

Ru3 (CO)12 -Catalyzed Modular Assembly of Hemilabile Ligands by C-H Activation of Phosphines with Isocyanates

Hemilabile ligands have been applied extensively in transition metal catalysis, but preparations of these molecules typically require multistep synthesis. Here, modular assembly of diverse phosphine-amide ligands, including related axially chiral compounds, is first reported through ruthenium-catalyzed C-H activation of phosphines with isocyanate directed by phosphorus(III) atoms. High reactivity and regioselectivity can be obtained by using a Ru₃ (CO)₁₂ catalyst with a mono-N-protected amino acid ligand. This transformation significantly expands the pool of phosphine-amide ligands, some of which have shown excellent efficiency for asymmetric catalysis. More broadly, the discovery constitutes a proof of principle for facile construction of hemilabile ligands directly from the parent monodentate phosphines by C-H activation with ideal atom, step and redox economy. Several dinuclear ruthenium complexes were characterized by single-crystal X-ray diffraction analysis revealing the key mechanistic features of this transformation.

Charge-controlled Pd catalysis enables the meta-C–H activation and olefination of arenes

The regioselective C-H activation of arenes remains one of the most promising techniques for accessing highly important functionalized motifs. Such functionalizations can generally be achieved through directed and non-directed processes. The directed approach requires a covalently attached directing group (DG) on the substrate to induce reactivity and selectivity and therefore intrinsically leaves a functional group at the point of attachment within the molecule, even after the tailored DG has been removed. Conversely, non-directed methods typically suffer from regioselectivity issues, especially for unbiased substrates. Herein, we report a unique approach that employs weak charge-charge and charge-dipole interactions to enable the meta-selective activation and olefination of arenes to address these challenges in Pd catalysis. The charged moiety can easily be converted to uncharged simple arenes by hydrogenation or cross-coupling. In-depth mechanistic studies prove that the charge is responsible for the observed selectivity. We expect our studies to be generalizable and thereby enable further regioselective transformations.

Palladium-Catalyzed Ortho C-H Arylation of Unprotected Anilines: Chemo- and Regioselectivity Enabled by the Cooperating Ligand [2,2'-Bipyridin]-6(1H)-one

Metal-catalyzed C-H functionalizations on the aryl ring of anilines usually need cumbersome N-protection-deprotection strategies to ensure chemoselectivity. We describe here the Pd-catalyzed direct C-H arylation of unprotected anilines with no competition of the N-arylation product. The ligand [2,2'-bipyridin]-6(1H)-one drives the chemoselectivity by kinetic differentiation in the product-forming step, while playing a cooperating role in the C-H cleavage step. The latter is favored in an anionic intermediate where the NH moiety is deprotonated, driving the regioselectivity of the reaction toward ortho substitution.

Site-Selective C-H Arylation of Diverse Arenes Ortho to Small Alkyl Groups

Catalytic systems for direct C-H activation of arenes commonly show preference for electronically activated and sterically exposed C-H sites. Here we show that a range of functionally rich and pharmaceutically relevant arene classes can undergo site-selective C-H arylation ortho to small alkyl substituents, preferably endocyclic methylene groups. The C-H activation is experimentally supported as being the selectivity-determining step, while computational studies of the transition state models indicate the relevance of non-covalent interactions between the catalyst and the methylene group of the substrate. Our results suggest that preference for C(sp² )-H activation next to alkyl groups could be a general selectivity mode, distinct from common steric and electronic factors.

S,O‐Ligand Promoted meta ‐C−H Arylation of Anisole Derivatives via Palladium/Norbornene Catalysis

Reversing the conventional site‐selectivity of C−H activation processes provides new retrosynthetic disconnections to otherwise unreactive bonds. Here, we report a new catalytic system based on palladium/norbornene and an S,O‐ligand for the meta‐C−H arylation of aryl ethers that significantly outperforms previously reported systems. We demonstrate the unique ability of this system to employ alkoxyarene substrates bearing electron donating and withdrawing substituents. Additionally, ortho‐substituted aryl ethers are well tolerated, overcoming the “ortho constraint”, which is the necessity to have a meta‐substituent on the alkoxyarene to achieve high reaction efficiency, by enlisting novel norbornene mediators. Remarkably, for the first time the monoarylation of alkoxyarenes is achieved efficiently enabling the subsequent introduction of a second, different aryl coupling partner to rapidly furnish unsymmetrical terphenyls. Further insight into the reaction mechanism was achieved by isolation and characterization of some Pd‐complexes—before and after meta C−H activation—prior to evaluation of their respective catalytic activities.

Ligand-Promoted Fluorinated Olefination of Isatins at the C5 Position via a Palladium Catalyst

A palladium-catalyzed nondirected fluorinated olefination was developed. The oxalyl amide ligand greatly improved the yield of the reaction. A wide variety of isatin derivatives were well tolerated and yielded the corresponding products in moderate to good yields. Various fluorinated olefins were also compatible. The application and synthesis of bioactive compounds such as a Metisazone derivative highlight the synthetic value of this approach.

Synthesis of allylanilines via scandium-catalysed benzylic C(sp3)-H alkenylation with alkynes

The ortho-selective benzylic C(sp³)-H alkenylation of 2-methyl tertiary anilines with internal alkynes has been achieved for the first time by using a half-sandwich scandium catalyst. This protocol provides a straightforward route for the synthesis of a new family of 2-allylaniline derivatives, featuring broad substrate scope, 100% atom-efficiency, high yields, and high chemo-, regio-, and stereoselectivity.

Dual Ligand Enabled Nondirected C-H Chalcogenation of Arenes and Heteroarenes

Chalcogenide motifs are present as principal moieties in a vast array of natural products and complex molecules. Till date, the construction of these chalcogen motifs has been restricted to either the use of directing groups or the employment of a large excess of electronically activated arenes, typically employed as a cosolvent. Despite being highly effective, these methods have their own limitations in the step economy and the deployment of an excess amount of arenes. Herein, we report the evolution of a catalytic system employing arene-limited, nondirected thioarylation of arenes and heteroarenes using a complimentary dual-ligand approach. The reaction is controlled by a combination of steric and electronic factors, and the utilization of a suitable ligand enables the generation of products on a complimentary spectrum to that generated by classical methods. The combination of ligands remains imperative in the reaction protocol with theoretical calculations pointing towards a monoprotected amino acid ligand being crucial in the concerted metalation deprotonation (CMD) mechanism by a characteristic [5,6]-palladacyclic transition state, while the pyridine moiety assists in the active catalyst species formation and product release. Combined experimental and computational mechanistic investigations point toward the C-H activation step being both regio- and rate-determining. Interestingly, oxidative addition of the diphenyl disulfide substrate is found to be unlikely, and an alternative transmetalation-like mechanism involving the Pd-Ag heterometallic complex is proposed to be operative.

Scandium-Catalyzed Benzylic C(sp3)-H Alkenylation of Tertiary Anilines with Alkynes

This work describes the chemo- and stereoselective benzylic C(sp³)-H alkenylation of tertiary ortho-methyl anilines with internal alkynes using a simple β-diketiminato scandium catalyst. This protocol offers an efficient method for the synthesis of a new family of tertiary ortho-allylanilines in high yields. The resultant alkenylation products facilely underwent further chemical transformation to other valuable anilines. A cationic scandium benzyl species was isolated from a stoichiometric reaction and confirmed to be the catalytic intermediate.

AgNTf2-Catalyzed Regioselective C-H Alkenylation of N,N-Dialkylanilines with Ynamides

Regioselective C-H alkenylation of N,N-dialkylanilines with ynamides was developed using AgNTf₂ as a catalyst. This approach represents a facile hydroarylation of ynamides, allowing for the introduction of an alkenyl group exclusively at the para position of aniline derivatives. As a result, a series of 4-alkenyl N,N-dialkylanilines were synthesized with excellent regioselectivities.

Mechanistic insights into the rhodium-catalyzed aryl C–H carboxylation

We have conducted an in-depth theoretical exploration of the details for direct C–H bond activation and lactonization of 2-arylphenols.

Non-directed Pd-catalysed electrooxidative olefination of arenes

The Fujiwara–Moritani reaction is a powerful tool for the olefination of arenes by Pd-catalysed C–H activation. However, the need for superstoichiometric amounts of toxic chemical oxidants makes the reaction unattractive from an environmental and atom-economical view. Herein, we report the first non-directed and regioselective olefination of simple arenes via an electrooxidative Fujiwara–Moritani reaction. The versatility of this operator-friendly approach was demonstrated by a broad substrate scope which includes arenes, heteroarenes and a variety of olefins. Electroanalytical studies suggest the involvement of a Pd(ii)/Pd(iv) catalytic cycle via a Pd(iii) intermediate.

The Fujiwara–Moritani reaction using electric current is a powerful tool for the olefination of arenes by Pd-catalysed C–H activation.

Base-Promoted Cobalt-Catalyzed Regio- and Enantioselective para-Friedel-Crafts Alkylation of Aniline Derivatives

Herein we disclose a highly efficient enantioselective para-C-H alkylation of aniline derivatives promoted by a base/Co/indeno-pybox ligand system. This methodology leads to the efficient construction of a series of enantioenriched aniline derivatives bearing all-carbon quaternary stereocenters. In addition, several special biologically or medicinally active indoles are facilely synthesized by our Co-catalyzed asymmetry synthesis method. Density functional theory calculations and experiment results suggest that the (acac)^- anion of Co(acac)₂ plays a very important role in chiral control during the nucleophilic reaction.

Selective Acid-Catalyzed Hydroarylation of Nonactivated Alkenes with Aniline Assisted by Hexafluoroisopropanol

The catalytic hydroarylation of nonactivated alkenes with aniline is a reaction of high interest, aiming at providing C-functionalized aniline derivatives that are important precursors for the fabrication of polyurethanes. However, this reaction remains a longstanding goal of catalysis, as it requires one to simultaneously address two important goals: (1) the very low reactivity of nonactivated alkenes and (2) control of the hydroarylation/hydroamination selectivity. As a result, the hydroarylation of aniline is mostly restricted to activated alkenes (i.e., featuring ring strain, conjugation, or activation with electron-donating or -withdrawing groups). Here we show that the combination of bismuth triflate and hexafluoroisopropanol (HFIP) leads to the formation of highly active catalytic species capable of promoting the hydroarylation of various nonactivated alkenes, such as 1-octene, 1-heptene, and 1-undecene, among others, with aniline with high selectivity (71-92%). Through a combined experimental and computational investigation, we propose a reaction pathway where HFIP stabilizes the rate-determining transition state through a H-bond interaction with the triflate anion, thus assisting the acid catalyst in the hydroarylation of nonactivated alkenes. From a practical point of view, this work opens a catalytic access to C-functionalized aniline derivatives from two cheap and abundant feedstocks in a 100% atom-economical fashion.

Selective para-C-H Alkynylation of Aniline Derivatives via Pd/S,O-Ligand Catalysis

Herein, we report a nondirected para -selective C-H alkynylation of aniline derivatives by a Pd/S,O-ligand-based catalyst. The reaction proceeds under mild conditions and is compatible with a variety of substituted anilines. The scalability and further derivatizations of the alkynylated products have been also demonstrated.

Palladium-Catalyzed Nondirected Late-Stage C-H Deuteration of Arenes

We describe a palladium-catalyzed nondirected late-stage deuteration of arenes. Key aspects include the use of D2O as a convenient and easily available deuterium source and the discovery of highly active N,N-bidentate ligands containing an N-acylsulfonamide group. The reported protocol enables high degrees of deuterium incorporation via a reversible C-H activation step and features extraordinary functional group tolerance, allowing for the deuteration of complex substrates. This is exemplified by the late-stage isotopic labeling of various pharmaceutically relevant motifs and related scaffolds. We expect that this method, among other applications, will prove useful as a tool in drug development processes and for mechanistic studies.

Ruthenium(ii)-catalyzed regioselective direct C4- and C5-diamidation of indoles and mechanistic studies

A ruthenium(ii)-catalyzed regioselective direct diamidation of 3-carbonylindoles at the C4- and C5-positions using various dioxazolones is described. This novel protocol allows for the effective installation of two amide groups on the benzene ring in indole. A remarkably broad substrate scope, excellent functional group tolerance, and mild reaction conditions are notable features of this protocol. Further explorations reveal that benzo[b]thiophene-3-carboxaldehyde is a viable substrate and affords its corresponding diamidation products. The diamido indoles are further converted into various functionalized products and used as sensors for metal ion detection. Density functional theory studies are also conducted to propose a reaction mechanism and provide a detailed understanding of the regioselectivity observed in the reaction.

Ruthenium(ii)-catalyzed regioselective C4-/C5-diamidation of 3-carbonylindoles is described and a DFT study is conducted to understand the observed regioselectivity and the mechanism.

Precursor-Directed Biosynthesis of Aminofulvenes: New Chalanilines from Endophytic Fungus Chalara sp

The plant endophyte Chalara sp. is able to biotransform the epigenetic modifier vorinostat to form unique, aniline-containing polyketides named chalanilines. Here, we sought to expand the chemical diversity of chalaniline A-type molecules by changing the aniline moiety in the precursor vorinostat. In total, twenty-three different vorinostat analogs were prepared via two-step synthesis, and nineteen were incorporated by the fungus into polyketides. The highest yielding substrates were selected for large-scale precursor-directed biosynthesis and five novel compounds, including two fluorinated chalanilines, were isolated, purified, and structurally characterized. Structure elucidation relied on 1D and 2D NMR techniques and was supported by low- and high-resolution mass spectrometry. All compounds were tested for their bioactivity but were not active in antimicrobial or cell viability assays. Aminofulvene-containing natural products are rare, and this high-yielding, precursor-directed process allows for the diversification of this class of compounds.

Controlled meta-Selective C-H Mono- and Di-Olefination of Mandelic Acid Derivatives

Mandelic acids represent a key structural motif present in many drug molecules. Herein, we report the controlled meta-selective mono- and diolefination of mandelic acids by the careful design of the substrate and oxidant. Furthermore, free meta-functionalized mandelic acid was generated by selectively removing the template under mild basic conditions. The synthesis of functionalized homatropine and cyclandelate drug derivatives was demonstrated. Kinetic isotope effects revealed C-H activation as the rate-limiting step.

Mechanism of the Arene-Limited Nondirected C-H Activation of Arenes with Palladium*

Recently palladium catalysts have been discovered that enable the directing-group-free C-H activation of arenes without requiring an excess of the arene substrate, thereby enabling methods for the late-stage modification of complex organic molecules. The key to success has been the use of two complementary ligands, an N-acyl amino acid and an N-heterocycle. Detailed experimental and computational mechanistic studies on the dual-ligand-enabled C-H activation of arenes have led us to identify the catalytically active species and a transition state model that explains the exceptional activity and selectivity of these catalysts. These findings are expected to be highly useful for further method development using this powerful class of catalysts.

Iron-Mediated Selective Sulfonylmethylation of Aniline Derivatives with p-Toluenesulfonylmethyl Isocyanide (TosMIC)

An iron-mediated highly selective C-H sulfonylmethylation of aniline derivatives with p-toluenesulfonylmethyl isocyanide in a mixture solvent of H₂O and PEG₄₀₀ under an Ar atmosphere has been realized. This transformation proceeds with operational convenience, use of earth-abundant metal catalyst and nontoxic media, broad substrate scope, and good functional group tolerance. The current methodology could be applied to the regioselective C-H sulfonylmethylation of indolines, tetrahydroquinolines, and tertiary anilines.

Divergent Total Syntheses of Yaequinolone-Related Natural Products by Late-Stage C-H Olefination

Divergent total syntheses of 10 yaequinolone-related natural products have been achieved for the first time by late-stage C-H olefination of 3,4-dioxygenated 4-aryl-5-hydroxyquinolin-2(1H)-ones, core structures of this family of natural products. A robust synthetic methodology to construct the core structures has been established, and the C-H olefination reaction has been carried out with synthetically useful yields and high levels of site-selectivity under mild reaction conditions in the presence of a Pd/S,O-ligand catalyst.