Cobalt-Modulated Molybdenum–Dinitrogen Interaction in MoS2 for Catalyzing Ammonia Synthesis

Constructing a interfacial electric field for efficient reduction of nitrogen to ammonia

Electrochemical nitrogen reduction (eNRR) is a cost-effective and environmentally sustainable approach for ammonia production. MoS2, as a typical layered transition metal compound, holds significant potential as an electrocatalyst for the eNRR. Nevertheless, it suffers from a limited number of active sites and low electron transfer efficiency. In this study, we constructed a heterostructure by depositing SnO2 (an n-type semiconductor) nanoparticles on MoS2 (a p-type semiconductor). This unique interfacial structure not only generates abundant interfacial contacts but also facilitates the transfer of electrons from SnO2 to MoS2, leading to the formation of an interfacial electric field. Theoretical calculations demonstrate that this electric field increases the number of active electrons, facilitating N2 adsorption and NN bond activation. Moreover, it increases the degree of orbital overlap between N2 and SnO2/MoS2, effectively reducing the energy barrier of the rate-determining step. Benefiting from the interfacial electric field effect, the SnO2/MoS2 catalyst exhibits significant catalytic activity and selectivity towards eNRR, with an ammonia yield of 47.1 µg h-1 mg-1 and a Faraday efficiency of 19.3 %, surpassing those reported for the majority of MoS2- and SnO2-based catalysts.

Experimental and Theoretical Research on Photocatalytic Nitrogen Reduction Using MoS2 Nanosheets with Polysulfide Vacancies

MoS2 nanosheets with different concentrations of S vacancies (VS-MoS2) were synthesized and used for photocatalytic nitrogen reduction reactions (pNRR), and the mechanism of S vacancies enhancing the activity of MoS2 was explored through DFT calculation. The material characterization confirmed the successful construction of S vacancies at different concentrations on the spherical cluster structure of MoS2. The experimental results show that the introduction of S vacancies significantly improves the activity of pNRR, and it increases significantly with the increase of vacancy number, consistent with the trend of photoelectric performance. VS-MoS2-3 exhibits the highest pNRR efficiency, which is 3.5 times higher than that of pristine MoS2, and after being reused three times, the activity only decreased by about 11%. DFT calculation results indicate that the exposed Mo atoms generated by S vacancies alter the charge layout on the MoS2 surface while providing abundant Mo active sites. Meanwhile, the band gap structure will narrow with the increase of S vacancies, which is beneficial for the transfer of surface charges. In addition, the increase of S vacancies, on the one hand, strengthens the adsorption of MoS2 on N2, weakens the adsorption of H, improves the selectivity of nitrogen, and is conducive to the progress of NRR. On the other hand, more electrons can be transferred from MoS2 to the adsorbed N2 molecules, enhancing the hybridization between them and better activating N2.

Synergistic dual built-in electric fields in 1T-MoS2/Ni3S2/LDH for efficient electrocatalytic overall water splitting reactions

Designing cost-effective electrocatalysts for water decomposition is crucial for achieving environmental-friendly hydrogen production. A transition metal sulfide/hydroxide electrocatalyst (1T-MoS2/Ni3S2/LDH) with double heterogeneous interfaces was developed through a two-step hydrothermal assisted electrodeposition method. The presence of the two built-in electric fields not only accelerated the charge transfer at the interface, but also enhanced the adsorption of the reactants and intermediate groups, and therefore improved the reaction rate and overall catalytic performance. The results suggest that the 1T-MoS2/Ni3S2/LDH catalysts display exceptional electrocatalytic reactivity. Under alkaline conditions, the overpotential of the electrocatalyst was 187 (η50) mV for OER and 104 (η10) mV for HER. Furthermore, the two-electrode system assembled by the electrocatalyst needs only a voltage of 1.55 V to deliver a current density of 10 mA cm-2. Our result provides a simple and effective methodical approach to the design of dual heterogeneous interfacial electrocatalysts.

NH3 Electrosynthesis from N2 Molecules: Progresses, Challenges, and Future Perspectives

Green ammonia (NH3), made by using renewable electricity to split nearly limitless nitrogen (N2) molecules, is a vital platform molecule and an ideal fuel to drive the sustainable development of human society without carbon dioxide emission. The NH3 electrosynthesis field currently faces the dilemma of low yield rate and efficiency; however, decoupling the overlapping issues of this area and providing guidelines for its development directions are not trivial because it involves complex reaction process and multidisciplinary entries (for example, electrochemistry, catalysis, interfaces, processes, etc.). In this Perspective, we introduce a classification scheme for NH3 electrosynthesis based on the reaction process, namely, direct (N2 reduction reaction) and indirect electrosynthesis (Li-mediated/plasma-enabled NH3 electrosynthesis). This categorization allows us to finely decouple the complicated reaction pathways and identify the specific rate-determining steps/bottleneck issues for each synthesis approach such as N2 activation, H2 evolution side reaction, solid-electrolyte interphase engineering, plasma process, etc. We then present a detailed overview of the latest progresses on solving these core issues in terms of the whole electrochemical system covering the electrocatalysts, electrodes, electrolytes, electrolyzers, etc. Finally, we discuss the research focuses and the promising strategies for the development of NH3 electrosynthesis in the future with a multiscale perspective of atomistic mechanisms, nanoscale electrocatalysts, microscale electrodes/interfaces, and macroscale electrolyzers/processes. It is expected that this Perspective will provide the readers with an in-depth understanding of the bottleneck issues and insightful guidance on designing the efficient NH3 electrosynthesis systems.

Tuning Local Atomic Structures in MoS2 Based Catalysts for Electrochemical Nitrate Reduction

In recent years, there has been a substantial surge in the investigation of transition-metal dichalcogenides such as MoS2 as a promising electrochemical catalyst. Inspired by denitrification enzymes such as nitrate reductase and nitrite reductase, the electrochemical nitrate reduction catalyzed by MoS2 with varying local atomic structures is reported. It is demonstrated that the hydrothermally synthesized MoS2 containing sulfur vacancies behaves as promising catalysts for electrochemical denitrification. With copper doping at less than 9% atomic ratio, the selectivity of denitrification to dinitrogen in the products can be effectively improved. X-ray absorption characterizations suggest that two sulfur vacancies are associated with one copper dopant in the MoS2 skeleton. DFT calculation confirms that copper dopants replace three adjacent Mo atoms to form a trigonal defect-enriched region, introducing an exposed Mo reaction center that coordinates with Cu atom to increase N2 selectivity. Apart from the higher activity and selectivity, the Cu-doped MoS2 also demonstrates remarkably improved tolerance toward oxygen poisoning at high oxygen concentration. Finally, Cu-doped MoS2 based catalysts exhibit very low specific energy consumption during the electrochemical denitrification process, paving the way for potential scale-up operations.

Nitrogen-vacancy-modulated efficient ammonia desorption over 3d TM-anchored BC3N2 monolayer

Nitrogen fixation using electrochemical methods on the surface of single-atom catalysts (SACs) provides a highly feasible strategy for green and low-energy-consumption ammonia (NH3) production. Herein, using density functional theory (DFT) calculations, we explored in detail the potential of monolayer BC3N2 SACs supported with 3d transition metal (TM) atoms (TM@BC3N2) to facilitate nitrogen reduction. The results revealed that the TM@BC3N2 systems exhibited remarkable catalytic activity in the nitrogen-reduction reaction (NRR). The fine NRR activity was related to the just-right bonding/antibonding orbital interactions between the 2π* of N2 and the d orbitals of the TM ions. The nitrogen-adsorption configurations were found to have different activation mechanisms. In addition, the effects of convectively formed convex nitrogen defects (VN) on the interaction between N2 and VN-TM@BC3N2 and the NRR process of VN-TM@BC3N2 were studied, and it was found that VN could fine-tune the reaction efficiency of the eNRR because after N atom dissociation to form VN, the interaction of TM-C3 was enhanced, and the activation of nitrogen and adsorption of NH3 by the TM-active centers were weakened. The present study can be used as a motivation for further experimental and theoretical research of 2D monolayers as NRR electrocatalysts.

The Advances, Challenges, and Perspectives on Electrocatalytic Reduction of Nitrogenous Substances to Ammonia: A Review

Ammonia (NH3) is considered to be a critical chemical feedstock in agriculture, industry, and other fields. However, conventional Haber-Bosch (HB) ammonia (NH3) production suffers from high energy consumption, harsh reaction conditions, and large carbon dioxide emissions. Despite the emergence of electrocatalytic reduction of nitrogenous substances to NH3 under ambient conditions as a new frontier, there are several bottleneck problems that impede the commercialization process. These include low catalytic efficiency, competition with the hydrogen evolution reaction, and difficulties in breaking the N≡N triple bond. In this review, we explore the recent advances in electrocatalytic NH3 synthesis, using nitrogen and nitrate as reactants. We focus on the contribution of the catalyst design, specifically based on molecular-catalyst interaction mechanisms, as well as chemical bond breaking and directional coupling mechanisms, to address the aforementioned problems during electrocatalytic NH3 synthesis. Finally, we discuss the relevant opportunities and challenges in this field.

Spontaneous Decoration of Ultrasmall Pt Nanoparticles on Size-Separated MoS2 Nanosheets

Liquid exfoliation can be considered as a viable approach for the scalable production of 2D materials due to its various benefits, although the polydispersity in the obtained nanosheet size hinders their straightforward incorporation. Size-separation can help alleviate these concerns, however a correlation between nanosheet size and property needs to be established to bring about size-specific applicability. Herein, size-selected aqueous nanosheet dispersions have been obtained via centrifugation-based protocols, and their chemical activity in the spontaneous reduction of chloroplatinic acid is investigated. Growth of ultrasmall Pt nanoparticles was achieved on nanosheet surfaces without a need for reducing agents, and stark differences in the nanoparticle coverage were observed as a function of nanosheet size. Defects in the nanosheets were probed via Raman spectroscopy, and correlated to the observed size-activity. Additionally, the effect of reaction temperature during synthesis was investigated. The electrochemical activity of the ultrasmall Pt nanoparticle decorated MoS2 nanosheets was evaluated for the hydrogen evolution reaction, and enhancement in performance was observed with nanosheet size, and nanoparticle decoration density. These findings shine light on the significance of nanosheet size in controlling spontaneous reduction reactions, and provide a deeper insight to intrinsic properties of liquid exfoliated nanosheets.

Recent advances in defect-engineered molybdenum sulfides for catalytic applications

Electrochemical energy conversion and storage driven by renewable energy sources is drawing ever-increasing interest owing to the needs of sustainable development. Progress in the related electrochemical reactions relies on highly active and cost-effective catalysts to accelerate the sluggish kinetics. A substantial number of catalysts have been exploited recently, thanks to the advances in materials science and engineering. In particular, molybdenum sulfide (MoSx) furnishes a classic platform for studying catalytic mechanisms, improving catalytic performance and developing novel catalytic reactions. Herein, the recent theoretical and experimental progress of defective MoSx for catalytic applications is reviewed. This article begins with a brief description of the structure and basic catalytic applications of MoS2. The employment of defective two-dimensional and non-two-dimensional MoSx catalysts in the hydrogen evolution reaction (HER) is then reviewed, with a focus on the combination of theoretical and experimental tools for the rational design of defects and understanding of the reaction mechanisms. Afterward, the applications of defective MoSx as catalysts for the N2 reduction reaction, the CO2 reduction reaction, metal-sulfur batteries, metal-oxygen/air batteries, and the industrial hydrodesulfurization reaction are discussed, with a special emphasis on the synergy of multiple defects in achieving performance breakthroughs. Finally, the perspectives on the challenges and opportunities of defective MoSx for catalysis are presented.

Improving the Luminescence Performance of Monolayer MoS2 by Doping Multiple Metal Elements with CVT Method

Two-dimensional (2D) transition metal dichalcogenides (TMDCs) draw much attention as critical semiconductor materials for 2D, optoelectronic, and spin electronic devices. Although controlled doping of 2D semiconductors can also be used to tune their bandgap and type of carrier and further change their electronic, optical, and catalytic properties, this remains an ongoing challenge. Here, we successfully doped a series of metal elements (including Hf, Zr, Gd, and Dy) into the monolayer MoS2 through a single-step chemical vapor transport (CVT), and the atomic embedded structure is confirmed by scanning transmission electron microscope (STEM) with a probe corrector measurement. In addition, the host crystal is well preserved, and no random atomic aggregation is observed. More importantly, adjusting the band structure of MoS2 enhanced the fluorescence and the carrier effect. This work provides a growth method for doping non-like elements into 2D MoS2 and potentially many other 2D materials to modify their properties.

Electrochemical nitrogen fixation on single metal atom catalysts

The electrochemical reduction of nitrogen (eNRR) offers a promising alternative to the Haber-Bosch (H-B) process for producing ammonia under moderate conditions. However, the inertness of dinitrogen and the competing hydrogen evolution reaction pose significant challenges for eNRR. Thus, developing more efficient electrocatalysts requires a deeper understanding of the underlying mechanistic reactions and electrocatalytic activity. Single atom catalysts, which offer tunable catalytic properties and increased selectivity, have emerged as a promising avenue for eNRR. Carbon and metal-based substrates have proven effective for dispersing highly active single atoms that can enhance eNRR activity. In this review, we explore the use of atomically dispersed single atoms on different substrates for eNRR from both conceptual and experimental perspectives. The review is divided into four sections: the first section describes eNRR mechanistic pathways, the second section focuses on single metal atom catalysts (SMACs) with metal atoms dispersed on carbon substrates for eNRR, the third section covers SMACs with metal atoms dispersed on non-carbon substrates for eNRR, and the final section summarizes the remaining challenges and future scope of eNRR for green ammonia production.

Efficient asymmetrical silicon-metal dimer electrocatalysts for the nitrogen reduction reaction

The electrocatalytic nitrogen reduction reaction (ENRR) has been regarded as an eco-friendly and feasible substitute for the Haber-Bosch method. Identifying the effective catalysts for the ENRR is an extremely important prerequisite but challenging. Herein, asymmetrical silicon-metal dimer catalysts doped into g-C₃N₄ nanosheets with nitrogen vacancies (SiM@C₃N₄) were designed to address nitrogen activation and reduction. The concept catalysts of SiM@C₃N₄ can combine the advantages of silicon-based and metal-based catalysts during the ENRR. Among the catalysts investigated, SiMo@C₃N₄ and SiRu@C₃N₄ exhibited the highest activities towards the ENRR with ultra-low onset potentials of -0.20 and -0.39 V; meanwhile, they suppressed the competing hydrogen evolution reaction (HER) due to the relative difficulty in releasing hydrogen. Additionally, SiRu@C₃N₄ is demonstrated to possess strong hydrophobicity, which is greatly beneficial to the production of ammonia. This research provides insights into asymmetrical silicon-metal dimer catalysts and reveals a new method for developing dual-atom electrocatalysts. This asymmetrical dimer strategy can be applied in other electrocatalytic reactions for energy conversion.

Disordered Au Nanoclusters for Efficient Ammonia Electrosynthesis

The electrochemical nitrogen (N₂ ) reduction reaction (N₂ RR) under mild conditions is a promising and environmentally friendly alternative to the traditional Haber-Bosch process with high energy consumption and greenhouse emission for the synthesis of ammonia (NH₃ ), but high-yielding production is rendered challenging by the strong nonpolar N≡N bond in N₂ molecules, which hinders their dissociation or activation. In this study, disordered Au nanoclusters anchored on two-dimensional ultrathin Ti₃ C₂ T_x MXene nanosheets are explored as highly active and selective electrocatalysts for efficient N₂ -to-NH₃ conversion, exhibiting exceptional activity with an NH₃ yield rate of 88.3±1.7 μg h^-1  mg_cat. ^-1 and a faradaic efficiency of 9.3±0.4 %. A combination of in situ near-ambient pressure X-ray photoelectron spectroscopy and operando X-ray absorption fine structure spectroscopy is employed to unveil the uniqueness of this catalyst for N₂ RR. The disordered structure is found to serve as the active site for N₂ chemisorption and activation during the N₂ RR process.

Advances in Semiconductor-Based Nanocomposite Photo(electro)catalysts for Nitrogen Reduction to Ammonia

Photo(electro)catalytic nitrogen fixation technology is a promising ammonia synthesis technology using clean solar and electric energy as the driving energy. Abundant nitrogen and water as raw materials uphold the principle of green and sustainable development. However, the generally low efficiency of the nitrogen reduction reaction has seriously restricted the application and development of this technology. The paper introduces the nitrogen reduction process and discusses the main challenges and differences in the current photo(electro)catalytic nitrogen fixation systems. It focuses on promoting the adsorption and activation of N2 and the resolution and diffusion of NH3 generated. In recent years, reviews of the modification strategies of semiconductor materials in light of the typical cases of nitrogen fixation have been reported in the literature. Finally, the future development trend of this field is analyzed and prospected.

To Molecularly Block Hydrogen Evolution Sites of Molybdenum Disulfide toward Improved Catalytic Performance for Electrochemical Nitrogen Reduction

2H-molybdenum disulfide (2H-MoS₂ ) represents a classical catalyst for the electrochemical N₂ reduction reaction (NRR) in water that offers a promising technology toward sustainable production of NH₃ driven by renewable energy. While the catalytic efficiency is severely limited by a simultaneous and competing H₂ evolution reaction (HER). Herein, it is proposed that the S edge of 2H-MoS₂ , which is known as main sites to afford HER, is intentionally covered by cobalt phthalocyanine (CoPc) molecules through axial coordination. While the Mo sites with S vacancies at 2H-MoS₂ edge is recognized as highly NRR active, and can keep structurally intact in the CoPc based modification. The resultant composite thus exhibits high NRR performance with Faradic efficiency and NH₃ yields increase by fourfold and twofold, respectively, comparing to pristine 2H-MoS₂ . These findings provide a deep insight into the mechanism of 2H-MoS₂ based NRR catalysis and suggest an efficient molecular modification strategy to promote NRR in water.

First-principles-driven catalyst design protocol of 2D/2D heterostructures for electro- and photocatalytic nitrogen reduction reaction

Ammonia synthesis from nitrogen is a vital process and a necessity in a variety of applications including energy, pharmaceutical, agricultural, and chemical applications. The electro- and photocatalytic nitrogen reduction reactions (NRRs) are promising sustainable processes operated under milder conditions than the conventional Haber-Bosch process. However, the main pain points of these catalytic processes are their low selectivity and low efficiency. This perspective presents the recent status and the design protocols for developing promising 2D/2D heterojunction catalysts for the NRR, using the first-principles approach. The current theoretical studies are briefly discussed, and available methods are suggested for the development and design of new potential 2D/2D heterojunctions as efficient electro- and photo-NRR catalysts.

Creating Highly Active Iron Sites in Electrochemical N2 Reduction by Fabricating Strongly-Coupled Interfaces

Electrochemical N_c reduction has been regarded as one of the most promising approaches to producing ammonia under mild conditions, but there are remaining pressing challenges in improving the reaction rate and efficiency. Herein, an unconventional galvanic replacement reaction is reported to fabricate a unique hierarchical structure composed of Fe₃ O₄ -CeO₂ bimetallic nanotubes covered by Fe₂ O₃ ultrathin nanosheets. Control experiments reveal that CeO₂ species play the essential role of stabilizer for Fe²⁺ cations. Compared with bare CeO₂ and Fe₂ O₃ nanotubes, the as-obtained Fe₂ O₃ /Fe₃ O₄ -CeO₂ possesses a remarkably enhanced NH₃ yield rate (30.9 µg h^-1 mg_cat ^-1 ) and Faradaic efficiency (26.3%). The enhancement can be attributed to the hierarchical feature that makes electrodes more easily to contact with electrolytes. More importantly, as verified by density functional theory calculations, the generation of Fe₂ O₃ -Fe₃ O₄ heterogeneous junctions can efficiently optimize the reaction pathways, and the energy barrier of the potential determining step (the *N₂ hydrogenates into *N*NH) is significantly decreased.

Co-Doped Fe3S4 Nanoflowers for Boosting Electrocatalytic Nitrogen Fixation to Ammonia under Mild Conditions

Compared with the Haber Bosch process, the electrochemical nitrogen reduction reaction (NRR) under mild conditions provides an alternative and promising route for ammonia synthesis due to its green and sustainable features. However, the great energy barrier to break the stable N≡N bond hinders the practical application of NRR. Though Fe is the only common metal element in all biological nitrogenases in nature, there is still a lack of study on developing highly efficient and low-cost Fe-based catalysts for N₂ fixation. Herein, Co-doped Fe₃S₄ nanoflowers were fabricated as the intended catalyst for NRR. The results indicate that 4% Co-doped Fe₃S₄ nanoflowers achieve a high Faradaic efficiency of 17% and a NH₃ yield rate of 37.5 μg·h^-1·mg^-1_cat. at -0.55 V versus RHE potential in 0.1 M HCl, which is superior to most Fe-based catalysts. The introduction of Co atoms can not only shift the partial density states of Fe₃S₄ toward the Fermi level but also serve as new active centers to promote N₂ absorption, lowering the energy barrier of the potential determination step to accelerate the catalytic process. This work paves a pathway of the morphology and doping engineering for Fe-based electrocatalysts to enhance ammonia synthesis.

Vacancy Defects in 2D Transition Metal Dichalcogenide Electrocatalysts: From Aggregated to Atomic Configuration

Vacancy defect engineering has been well leveraged to flexibly shape comprehensive physicochemical properties of diverse catalysts. In particular, growing research effort has been devoted to engineering chalcogen anionic vacancies (S/Se/Te) of 2D transition metal dichalcogenides (2D TMDs) toward the ultimate performance limit of electrocatalytic hydrogen evolution reaction (HER). In spite of remarkable progress achieved in the past decade, systematic and in-depth insights into the state-of-the-art vacancy engineering for 2D-TMDs-based electrocatalysis are still lacking. Herein, this review delivers a full picture of vacancy engineering evolving from aggregated to atomic configurations covering their development background, controllable manufacturing, thorough characterization, and representative HER application. Of particular interest, the deep-seated correlations between specific vacancy regulation routes and resulting catalytic performance improvement are logically clarified in terms of atomic rearrangement, charge redistribution, energy band variation, intermediate adsorption-desorption optimization, and charge/mass transfer facilitation. Beyond that, a broader vision is cast into the cutting-edge research fields of vacancy-engineering-based single-atom catalysis and dynamic structure-performance correlations across catalyst service lifetime. Together with critical discussion on residual challenges and future prospects, this review sheds new light on the rational design of advanced defect catalysts and navigates their broader application in high-efficiency energy conversion and storage fields.

Highly efficient electrochemical N2 reduction over strongly coupled CeO2-Mo2C nanocomposites anchored by reduced graphene oxide

Electrocatalytic N₂ fixation has been considered a most promising approach for sustainably producing NH₃ under ambient conditions. However, owing to the strong chemical inertness of N₂, it is highly desired to explore efficient electrocatalysts for improving the yield and selectivity of nitrogen reduction. Herein, CeO₂ and Mo₂C nanoparticles embedded simultaneously in reduced graphene oxide nanosheets (CeO₂/Mo₂C@rGO) are successfully fabricated for catalyzing N₂ fixation. The as-obtained CeO₂/Mo₂C@rGO catalyst shows superior catalytic performance with an NH₃ yield of 22.3 μg h^-1 mg^-1 and a faradaic efficiency (FE) of 12.7% at -0.3 V vs. the RHE, distinctly outperforming the undoped Ce counterpart of Mo₂C@rGO. The experimental and DFT calculations reveal that the introduced Ce optimized the electronic structure, contributing to the improved NRR performance.

Scalable-doped Nanoporous 1T″ ReSe2 via a General Surface Co-Alloy Strategy

Reliable and controllable doping of 2D transition metal dichalcogenides is an efficient approach to tailor their physicochemical properties and expand their functional applications. However, precise control over dopant distribution and scalability of the process remains a challenge. Here, we report a general method to achieve scalable in situ doping of centimeter-sized bicontinuous nanoporous ReSe₂ films with transition metal atoms via surface coalloy growth. The distinct strains induced by the bending curvature of nanoporous structures and uniform dopants result in a local 1T' to 1T″ structure phase transition over nanoporous ReSe₂ films. The as-prepared nanoporous Ru-ReSe₂ with high 1T″ phase exhibits preferable electrochemical activity in hydrogen evolution reaction. The work demonstrates a unique and general approach to synthesize uniformly-doped transition metal dichalcogenides with 3D bicontinuous nanoporous structure, which can be scaled up to batch production for various applications.

Atomic and structural modifications of two-dimensional transition metal dichalcogenides for various advanced applications

Two-dimensional (2D) transition metal dichalcogenides (TMDs) and their heterostructures have attracted significant interest in both academia and industry because of their unusual physical and chemical properties. They offer numerous applications, such as electronic, optoelectronic, and spintronic devices, in addition to energy storage and conversion. Atomic and structural modifications of van der Waals layered materials are required to achieve unique and versatile properties for advanced applications. This review presents a discussion on the atomic-scale and structural modifications of 2D TMDs and their heterostructures via post-treatment. Atomic-scale modifications such as vacancy generation, substitutional doping, functionalization and repair of 2D TMDs and structural modifications including phase transitions and construction of heterostructures are discussed. Such modifications on the physical and chemical properties of 2D TMDs enable the development of various advanced applications including electronic and optoelectronic devices, sensing, catalysis, nanogenerators, and memory and neuromorphic devices. Finally, the challenges and prospects of various post-treatment techniques and related future advanced applications are addressed.

Lattice-Confined Single-Atom Fe1 Sx on Mesoporous TiO2 for Boosting Ambient Electrocatalytic N2 Reduction Reaction

Mimicking natural nitrogenase to create highly efficient single-atom catalysts (SACs) for ambient N₂ fixation is highly desired, but still challenging. Herein, S-coordinated Fe SACs on mesoporous TiO₂ have been constructed by a lattice-confined strategy. The extended X-ray absorption fine structure and X-ray photoelectron spectroscopy spectra demonstrate that Fe atoms are anchored in TiO₂ lattice via the FeS₂ O₂ coordination configuration. Theoretical calculations reveal that FeS₂ O₂ sites are the active centers for electrocatalytic nitrogen reduction reaction (NRR). Moreover, the finite element analysis shows that confinement of opened and ordered mesopores can facilitate the mass transport and offer an enlarged active surface area for NRR. As a result, this catalyst delivers a favorable NH₃ yield rate of 18.3 μg h^-1  mg_cat. ^-1 with a high Faradaic efficiency of 17.3 % at -0.20 V versus a reversible hydrogen electrode. Most importantly, this lattice-confined strategy is universal and can also be applied to Ni₁ S_x @TiO₂ , Co₁ S_x @TiO₂ , Mo₁ S_x @TiO₂ , and Cu₁ S_x @TiO₂ SACs. Our study provides new hints for the design and biomimetic synthesis of highly efficient NRR electrocatalysts.

Electrocatalytic Reduction of N2 to NH3 Over Defective 1T'-WX2 (X=S, Se, Te) Monolayers

Defects in transition metal dichalcogenides (TMDs) can serve as active sites in catalytic reactions. In this work, by means of first-principles calculations, the catalytic activities of WX₂ (X=S, Se, Te) monolayers in the 1T' phase with both vacancy defects (missing chalcogen atoms, ^X V_d ) and antisite defects (replacing chalcogen atoms with W atoms, ^X A_d ) were evaluated for the nitrogen reduction reaction (NRR). Results showed that all these defective catalysts had great potential toward electrocatalytic ammonia synthesis by exhibiting low limiting potentials (U_L ). Over 1T'-WTe₂ @^Te V_d , 1T'-WS₂ @^S A_d , 1T'-WSe₂ @^Se A_d , and 1T'-WTe₂ @^Te A_d , the corresponding U_L values were -0.49, -0.21, -0.19, and -0.15 V, much smaller than that of the benchmark catalyst, the Ru (0001) surface (U_L =-0.98 V). Furthermore, the hydrogen evolution reaction (HER) was inhibited. 1T'-WX₂ monolayers with the antisite defects showed better NRR activity than those with the vacancy defects because of the smaller steric hindrance at the former. Results suggest that the steric effect at the active surface sites should be utilized to develop better catalysts.

Formation of Interfacial Cu-[OX ]-Ce Structures with Oxygen Vacancies for Enhanced Electrocatalytic Nitrogen Reduction

Electrochemical nitrogen reduction powered by renewable electricity is a promising strategy to produce ammonia. However, the lack of efficient yet cheap electrocatalysts remains the biggest challenge. Herein, hybrid Cu₂ O-CeO₂ -C nanorods are prepared on copper mesh through a metal-organic framework template route. The Cu-loaded Ce-MOF is thermally converted to Cu₂ O-CeO₂ heterojunctions with interfacial Cu-[O_X ]-Ce structures embedded in carbon. Theoretical calculations reveal the lower formation energy of oxygen vacancies in Cu-[O_X ]-Ce structures than in the Cu₂ O or CeO₂ phase. The Cu-[O_X ]-Ce structures with oxygen vacancies enable the formation of interfacial electron-rich Cu(I) species which show significantly enhanced performance toward electrocatalytic nitrogen reduction with an NH₃ yield of 6.37 × 10^-3  µg s^-1 cm^-2 and a Faradaic efficiency of 18.21% in 0.10 m KOH at -0.3 V versus reversible hydrogen electrode. This work highlights the importance of modulation of charge distribution of Cu-based electrocatalysts to boost the activity toward nitrogen reduction.

Crystalline Modulation Engineering of Ru Nanoclusters for Boosting Ammonia Electrosynthesis from Dinitrogen or Nitrate

Developing highly efficient nitrogen reduction reaction (NRR) and nitrate reduction reaction (NITRR) electrocatalysts is an ongoing challenge. Herein, we report the in situ growth of ultrafine amorphous Ru nanoclusters with a uniform diameter of ∼1.2 nm on carbon nanotubes as a highly efficient electrocatalyst for both the NRR and the NITRR. The amorphous Ru nanoclusters were prepared via a convenient ambient chelated co-reduction method, in which trisodium citrate as a chelating agent played a key role to form amorphous Ru instead of crystalline Ru. The strong d-π interaction between Ru metal and carbon nanotubes led to the homogeneous distribution and good long-term stability of ultrafine Ru nanoclusters. Compared with crystalline Ru, amorphous Ru nanoclusters with abundant low-coordinate atoms can provide more catalytic sites. The amorphous Ru nanoclusters exhibited an NH₃ yield of 10.49 μg·h^-1·mg_cat.^-1 and a FE_NH3 of 17.48% at -0.2 V vs reversible hydrogen electrode (RHE) for NRR. For the NITRR, an NH₃ yield of 145.1 μg·h^-1·mg_cat.^-1 and a FE_NH3 of 80.62% were also achieved at -0.2 V vs RHE. This work provides new insights into crystalline modulation engineering of metal nanoclusters for electrocatalytic ammonia synthesis.

Surface Valence State Effect of MoO2+x on Electrochemical Nitrogen Reduction

The valance of Mo is critical for FeMo cofactor in ambient ammonia synthesis. However, the valence effect of Mo has not been well studied in heterogeneous nanoparticle catalysts for electrochemical nitrogen reduction reaction (NRR) due to the dissolution of Mo as MoO₄^2- in alkaline electrolytes. Here, a MoO_2+x catalyst enriched with surface Mo⁶⁺ is reported. The Mo⁶⁺ is stabilized by a native oxide layer to prevent corrosion and its speciation is identified as (MoO₃ )_n clusters. This native layer with Mo⁶⁺ suppresses the hydrogen evolution significantly and promotes the activation of nitrogen as supported by both experimental characterization and theoretical calculation. The as-prepared MoO_2+x catalyst shows a high ammonia yield of 3.95 µg mg_cat^-1 h^-1 with a high Faradaic efficiency of 22.1% at -0.2 V versus reversible hydrogen electrode, which is much better than the MoO₂ catalyst with Mo⁶⁺ etched away. The accuracy of experimental results for NRR is confirmed by various control experiments and quantitative isotope labeling.

Mo2C-MoO2 Heterostructure Quantum Dots for Enhanced Electrocatalytic Nitrogen Reduction to Ammonia

The electrocatalytic nitrogen reduction reaction (NRR) has been regarded as a promising strategy for producing ammonia (NH₃) at ambient conditions. However, the development of the NRR is severely hindered by the difficult adsorption and activation of N₂ on the catalyst surface and the competitive hydrogen evolution reaction (HER) due to the lack of efficient NRR electrocatalysts. Herein, Mo₂C-MoO₂ heterostructure quantum dots embedded in reduced graphene oxide (RGO) are proposed as efficient catalysts for the electrocatalytic NRR. The ultrasmall size of the quantum dot is beneficial for exposing the active sites for the NRR, and the synergetic effect of Mo₂C and MoO₂ can promote N₂ adsorption and activation and suppress the competitive HER simultaneously. As a result, a well-balanced NRR performance is achieved with a high NH₃ yield rate of 13.94 ± 0.39 μg h^-1 mg^-1 at -0.15 V vs RHE and a high Faradaic efficiency of 12.72 ± 0.58% at -0.1 V vs RHE. Density functional theory (DFT) calculations reveal that the Mo₂C (001) surface has a strong N₂ adsorption energy of -1.47 eV with the side-on configuration, and the N≡N bond length is elongated to 1.254 Å, indicating the enhanced N₂ adsorption and activation on the Mo₂C surface. On the other hand, the low ΔG_H* for HER over the MoO₂ (-111) surface demonstrates the impeded HER process for MoO₂. This work may provide effective catalyst-design strategies for enhancing the electrocatalytic NRR performance of Mo-based materials.

Quasi-Phthalocyanine Conjugated Covalent Organic Frameworks with Nitrogen-Coordinated Transition Metal Centers for High-Efficiency Electrocatalytic Ammonia Synthesis

Developing high-performance nitrogen reduction reaction (NRR) electrocatalysts is an ongoing challenge. Herein, we report a pyrolysis-free synthetic method for introducing ordered quasi-phthalocyanine N-coordinated transition metal (Ti, Cu, or Co) centers into a conjugated two-dimensional (2D) covalent organic framework (COF) for enhanced NRR performance. Detailed experiments and characterizations revealed that the NRR activity of Ti-COF was clearly better than that of Cu-COF and Co-COF, because of the superior abilities of Ti metal centers in activating inert N₂ molecules and suppressing the hydrogen evolution reaction (HER). The resulting Ti-COF exhibits a high NH₃ yield of 26.89 μg h^-1 mg^-1_cat. and a Faradaic efficiency of 34.62% for NRR. Density functional theory (DFT) calculations verify that Ti-COF can effectively adsorb and activate N₂ molecules and inhibit HER compared with Cu-COF, Co-COF, and pristine COF catalysts. This work opens a new avenue for developing 2D-COF materials that contain abundant coordinated transition metal centers toward electrocatalytic NRR.

Screening of Transition-Metal Single-Atom Catalysts Anchored on Covalent-Organic Frameworks for Efficient Nitrogen Fixation

Two-dimensional (2D) covalent-organic frameworks (COFs) offer abundant hollow sites for stably anchoring transition-metal (TM) atoms to promote single-atom catalysis (SACs), which is expected to overcome the poor stability of SACs on conventional substrate materials. Using first-principles calculations within density-functional theory, a number of TM atoms embedded on a 2D COF Pc-TFPN (TMPc-TFPN) as SACs for ammonia synthesis under ambient conditions are investigated. Through a "five-step" screening strategy, WPc-TFPN is highlighted from 26 TMPc-TFPNs as the best SACs for nitrogen reduction reaction (NRR) with a low limiting potential of -0.19 V. Meanwhile, multiple-level descriptors are developed to uncover the origins of NRR activity, among which a simple descriptor φ that involves the electronegativity and number of d electrons of TM atoms shows volcano plot trends of limiting potential of NRR. This work provides a rational strategy for fast screening SACs for the electrochemical N₂ fixation using 2D COFs containing TM-N₄ units as host materials, which could also be applied to other electrochemical reactions.

Recent advances in MoS2-based materials for electrocatalysis

The increasing energy demand and related environmental issues have drawn great attention of the world, thus necessitating the development of sustainable technologies to preserve the ecosystems for future generations. Electrocatalysts...

Light induced ammonia synthesis by crystalline polyoxometalate-based hybrid frameworks coupled with the Sv-1T MoS2 cocatalyst

A series of crystalline polyoxometalate-based hybrid frameworks coupled with rich sulfur vacancy 1T MoS2 through the hydrothermal growth strategy are presented towards light induced ammonia synthesis.

Activation of MoS2 Monolayer Electrocatalysts via Reduction and Phase Control in Molten Sodium for Selective Hydrogenation of Nitrogen to Ammonia

Electrochemical nitrogen fixation under ambient conditions is promising for sustainable ammonia production but is hampered by high reaction barrier and strong competition from hydrogen evolution, leading to low specificity and faradaic efficiency with existing catalysts. Here we describe the activation of MoS₂ in molten sodium that leads to simultaneous formation of a sulfur vacancy-rich heterostructured 1T/2H-MoS_x monolayer via reduction and phase transformation. The resultant catalyst exhibits intrinsic activities for electrocatalytic N₂-to-NH₃ conversion, delivering a faradaic efficiency of 20.5% and an average NH₃ rate of 93.2 μg h⁻¹ mg_cat⁻¹. The interfacial heterojunctions with sulfur vacancies function synergistically to increase electron localization for locking up nitrogen and suppressing proton recombination. The 1T phase facilitates H–OH dissociation, with S serving as H-shuttling sites and to stabilize . The subsequently couple with nearby N₂ and NH_x intermediates bound at Mo sites, thus greatly promoting the activity of the catalyst. First-principles calculations revealed that the heterojunction with sulfur vacancies effectively lowered the energy barrier in the potential-determining step for nitrogen reduction, and, in combination with operando spectroscopic analysis, validated the associative electrochemical nitrogen reduction pathway. This work provides new insights on manipulating chalcogenide vacancies and phase junctions for preparing monolayered MoS₂ with unique catalytic properties.

We describe the activation of MoS₂ in molten sodium that leads to the simultaneous formation of a sulfur vacancy-rich heterostructured 1T/2H-MoS_x monolayer electrocatalyst via reduction and phase transformation.

Single-Atom Gold Isolated Onto Nanoporous MoSe2 for Boosting Electrochemical Nitrogen Reduction

The electrocatalytic nitrogen reduction reaction (NRR) provides a promising strategy to convert the abundant but inert N₂ into NH₃ using renewable energy. Herein, single-atom Au isolated onto bicontinous nanoporous MoSe₂ (np-MoSe₂ ) is designed as an electrocatalyst for achieving highly efficient NRR catalysis, which exhibits a high Faradaic efficiency (FE) of 37.82% and an NH₃ production rate of 30.83 µg h^-1 mg^-1 at -0.3 V versus a reversible hydrogen electrode (RHE) in 0.1 m Na₂ SO₄ under ambient conditions. Experimental and theoretical investigations reveal that the introduction of single Au atoms onto np-MoSe₂ optimizes the adsorption of NRR intermediates while suppressing the competing HER, thus providing an energetic-favorable process for enhancing the catalytic selectivity toward electrochemical N₂ reduction into NH₃ .

Highly Efficient Electrocatalytic N2 Reduction to Ammonia over Metallic 1T Phase of MoS2 Enabled by Active Sites Separation Mechanism

The 1T phase of MoS2 has been widely reported to be highly active toward the hydrogen evolution reaction (HER), which is expected to restrict the competitive nitrogen reduction reaction (NRR). However, in this work, a prototype of active sites separation over 1T-MoS2 is proposed by DFT calculations that the Mo-edge and S atoms on the basal plane exhibit different catalytic NRR and HER selectivity, and a new role-playing synergistic mechanism is also well enabled for the multistep NRR, which is further experimentally confirmed. More importantly, a self-sacrificial strategy using g-C3 N4 as templates is proposed to synthesize 1T-MoS2 with an ultrahigh 1T content (75.44%, named as CNMS, representing the composition elements of C, N, Mo, and S), which yields excellent NRR performances with an ammonia formation rate of 71.07 µg h-1 mg-1 cat. at -0.5 V versus RHE and a Faradic efficiency of 21.01%. This work provides a promising new orientation of synchronizing the selectivity and activity for the multistep catalytic reactions.

Boron-Functionalized Organic Framework as a High-Performance Metal-Free Catalyst for N2 Fixation

Inspired by the recently synthesized covalent organic framework (COF) containing triquinoxalinylene and benzoquinone units (TQBQ) in the skeleton, we study the stability and properties of its two-dimensional analogue, TQBQCOF, and examine its potential for the synthesis of ammonia using first-principles calculations. We show that the TQBQCOF sheet is mechanically, dynamically, and thermally stable up to 1200 K. It is a semiconductor with a direct band gap of 2.70 eV. We further investigate the electrocatalytic reduction of N₂to NH₃on the Boron-functionalized TQBQCOF sheet (B/TQBQCOF). The rate-determining step of the catalytic pathways is found to be *N-N → *N-NH for the distal, alternating, and enzymatic catalytic mechanisms, with the corresponding overpotentials of 0.65, 0.65, and 0.07 V, respectively. The value of 0.07 V is the lowest required voltage among all of the N₂ reduction catalysts reported so far, showing the potential of B/TQBQCOF as a metal-free catalyst to effectively reduce N₂to NH₃.