Oxidative Decarboxylase UndA Utilizes a Dinuclear Iron Cofactor

No Bridge between Us: EXAFS and Computations Confirm Two Distant Iron Ions Comprise the Active Site of Alkane Monooxygenase (AlkB)

Alkane monooxygenase (AlkB) is the dominant enzyme that catalyzes the oxidation of liquid alkanes in the environment. Two recent structural models derived from cryo-electron microscopy (cryo-EM) reveal an unusual active site: a histidine-rich center that binds two iron ions without a bridging ligand. To ensure that potential photoreduction and radiation damage are not responsible for the absence of a bridging ligand in the cryo-EM structures, spectroscopic methods are needed. We present the results of extended X-ray absorption fine structure (EXAFS) experiments collected under conditions where photodamage was avoided. Careful data analysis reveals an active site structure consistent with the cryo-EM structures in which the two iron ions are ligated by nine histidines and separated by at least 5 Å. The EXAFS data were used to inform structural models for molecular dynamics (MD) simulations. The MD simulations corroborate EXAFS observations that neither of the two conserved carboxylate-containing residues (E281 and D190) near the active site are likely candidates for metal ion bridging. Mutagenesis experiments, spectroscopy, and additional MD simulations were used to further explore the role of these carboxylate residues. A variant in which a carboxylate containing residue (E281) was changed to a methyl residue (E281A) showed little change in pre-edge features, consistent with the observation that it is not essential for activity and hence unlikely to serve as a bridging ligand at any point in the catalytic cycle. D190 variants had substantially diminished activity, suggesting an important role in catalysis not yet fully understood.

A single diiron enzyme catalyses the oxidative rearrangement of tryptophan to indole nitrile

Nitriles are uncommon in nature and are typically constructed from oximes through the oxidative decarboxylation of amino acid substrates or from the derivatization of carboxylic acids. Here we report a third nitrile biosynthesis strategy featuring the cyanobacterial nitrile synthase AetD. During the biosynthesis of the eagle-killing neurotoxin, aetokthonotoxin, AetD transforms the 2-aminopropionate portion of 5,7-dibromo-L-tryptophan to a nitrile. Employing a combination of structural, biochemical and biophysical techniques, we characterized AetD as a non-haem diiron enzyme that belongs to the emerging haem-oxygenase-like dimetal oxidase superfamily. High-resolution crystal structures of AetD together with the identification of catalytically relevant products provide mechanistic insights into how AetD affords this unique transformation, which we propose proceeds via an aziridine intermediate. Our work presents a unique template for nitrile biogenesis and portrays a substrate binding and metallocofactor assembly mechanism that may be shared among other haem-oxygenase-like dimetal oxidase enzymes.

Assembly of a Heterobimetallic Fe/Mn Cofactor in the para-Aminobenzoate Synthase Chlamydia Protein Associating with Death Domains (CADD) Initiates Long-Range Radical Hole-Hopping

Chlamydia protein associating with death domains (CtCADD) is involved in the biosynthesis of p-aminobenzoic acid (pABA) for integration into folate, a critical cofactor that is required for pathogenic survival. CADD activates dioxygen and utilizes its own tyrosine and lysine as synthons to furnish the carboxylate, carbon backbone, and amine group of pABA in a complex multistep mechanism. Unlike other members of the heme oxygenase-like dimetal oxidase (HDO) superfamily that typically house an Fe2 cofactor, previous activity studies have shown that CtCADD likely uses a heterobimetallic Fe/Mn center. The structure of the Fe2+/Mn2+ cofactor and how the conserved HDO scaffold mediates metal selectivity have remained enigmatic. Adopting an in crystallo metalation approach, CtCADD was solved in the apo, Fe2+2, Mn2+2, and catalytically active Fe2+/Mn2+ forms to identify the probable site for Mn binding. The analysis of CtCADD active-site variants further reinforces the importance of the secondary coordination sphere on cofactor preference for competent pABA formation. Rapid kinetic optical and electron paramagnetic resonance (EPR) studies show that the heterobimetallic cofactor selectively reacts with dioxygen and likely initiates pABA assembly through the formation of a transient tyrosine radical intermediate and a resultant heterobimetallic Mn3+/Fe3+ cluster.

Structural Basis for Methine Excision by a Heme Oxygenase-like Enzyme

Heme oxygenase-like domain-containing oxidases (HDOs) are a rapidly expanding enzyme family that typically use dinuclear metal cofactors instead of heme. FlcD, an HDO from the opportunistic pathogen Pseudomonas aeruginosa, catalyzes the excision of an oxime carbon in the biosynthesis of the copper-containing antibiotic fluopsin C. We show that FlcD is a dioxygenase that catalyzes a four-electron oxidation. Crystal structures of FlcD reveal a mononuclear iron in the active site, which is coordinated by two histidines, one glutamate, and the oxime of the substrate. Enzyme activity, Mössbauer spectroscopy, and electron paramagnetic resonance spectroscopy analyses support the usage of a mononuclear iron cofactor. This cofactor resembles that of mononuclear non-heme iron-dependent enzymes and breaks the paradigm of dinuclear HDO cofactors. This study begins to illuminate the catalytic mechanism of methine excision and indicates convergent evolution of different lineages of mononuclear iron-dependent enzymes.

Decarboxylation in Natural Products Biosynthesis

Decarboxylation reactions are frequently found in the biosynthesis of primary and secondary metabolites. Decarboxylase enzymes responsible for these transformations operate via diverse mechanisms and act on a large variety of substrates, making them appealing in terms of biotechnological applications. This Perspective focuses on the occurrence of decarboxylation reactions in natural product biosynthesis and provides a perspective on their applications in biocatalysis for fine chemicals and pharmaceuticals.

A chimeric membrane enzyme and an engineered whole-cell biocatalyst for efficient 1-alkene production

Bioproduction of 1-alkenes from naturally abundant free fatty acids offers a promising avenue toward the next generation of hydrocarbon-based biofuels and green commodity chemicals. UndB is the only known membrane-bound 1-alkene-producing enzyme, with great potential for 1-alkene bioproduction, but the enzyme exhibits limited turnovers, thus restricting its widespread usage. Here, we explore the molecular basis of the limitation of UndB activity and substantially improve its catalytic power. We establish that the enzyme undergoes peroxide-mediated rapid inactivation during catalysis. To counteract this inactivation, we engineered a chimeric membrane enzyme by conjugating UndB with catalase that protected UndB against peroxide and enhanced its number of turnovers tremendously. Notably, our chimeric enzyme is the only example of a membrane enzyme successfully engineered with catalase. We subsequently constructed a whole-cell biocatalytic system and achieved remarkable efficiencies (up to 95%) in the biotransformation of a wide range of fatty acids (both aliphatic and aromatic) into corresponding 1-alkenes with numerous biotechnological applications.

Discovery and Characterization of Pyridoxal 5'-Phosphate-Dependent Cycloleucine Synthases

Pyridoxal 5'-phosphate (PLP)-dependent enzymes are the most versatile biocatalysts for synthesizing nonproteinogenic amino acids. α,α-Disubstituted quaternary amino acids, such as 1-aminocyclopentane-1-carboxylic acid (cycloleucine), are useful building blocks for pharmaceuticals. In this study, starting with the biosynthesis of fusarilin A, we discovered a family of PLP-dependent enzymes that can facilitate tandem carbon-carbon forming steps to catalyze an overall [3 + 2]-annulation. In the first step, the cycloleucine synthases use SAM as the latent electrophile and an in situ-generated enamine as the nucleophile for γ-substitution. Whereas previously characterized γ-replacement enzymes protonate the resulting α-carbon and release the acyclic amino acid, cycloleucine synthases can catalyze an additional, intramolecular aldol or Mannich reaction with the nucleophilic α-carbon to form the substituted cyclopentane. Overall, the net [3 + 2]-annulation reaction can lead to 2-hydroxy or 2-aminocycloleucine products. These studies further expand the biocatalytic scope of PLP-dependent enzymes.

Initial Steps in Methanobactin Biosynthesis: Substrate Binding by the Mixed-Valent Diiron Enzyme MbnBC

The MbnBC enzyme complex converts cysteine residues in a peptide substrate, MbnA, to oxazolone/thioamide groups during the biosynthesis of copper chelator methanobactin (Mbn). MbnBC belongs to the mixed-valent diiron oxygenase (MVDO) family, of which members use an Fe(II)Fe(III) cofactor to react with dioxygen for substrate modification. Several crystal structures of the inactive Fe(III)Fe(III) form of MbnBC alone and in complex with MbnA have been reported, but a mechanistic understanding requires determination of the oxidation states of the crystallographically observed Fe ions in the catalytically active Fe(II)Fe(III) state, along with the site of MbnA binding. Here, we have used electron nuclear double resonance (ENDOR) spectroscopy to determine such structural and electronic properties of the active site, in particular, the mode of substrate binding to the MV state, information not accessible by X-ray crystallography alone. The oxidation states of the two Fe ions were determined by 15N ENDOR analysis. The presence and locations of both bridging and terminal exogenous solvent ligands were determined using 1H and 2H ENDOR. In addition, 2H ENDOR using an isotopically labeled MbnA substrate indicates that MbnA binds to the Fe(III) ion of the cluster via the sulfur atom of its N-terminal modifiable cysteine residue, with displacement of a coordinated solvent ligand as shown by complementary 1H ENDOR. These results, which underscore the utility of ENDOR in studying MVDOs, provide a molecular picture of the initial steps in Mbn biosynthesis.

Unusual cysteine modifications in natural product biosynthesis

l-Cysteine is a highly reactive amino acid that is modified into a variety of chemical structures, including cysteine sulfinic acid in human metabolic pathways, and sulfur-containing scaffolds of amino acids, alkaloids, and peptides in natural product biosynthesis. Among the modification enzymes responsible for these cysteine-derived compounds, metalloenzymes constitute an important family of enzymes that catalyze a wide variety of reactions. Therefore, understanding their reaction mechanisms is important for the biosynthetic production of cysteine-derived natural products. This review mainly summarizes recent mechanistic investigations of metalloenzymes, with a particular focus on recently discovered mononuclear non-heme iron (NHI) enzymes, dinuclear NHI enzymes, and radical-SAM enzymes involved in unusual cysteine modifications in natural product biosynthesis.

DFT mechanistic study of biomimetic diiron complex catalyzed dehydrogenation: Unexpected Fe(III)Fe(III)-1,1-μ-hydroperoxy active species for hydride abstraction

The diiron active site is pivotal in catalyzing transformations in both biological and chemical systems. Recently, a range of biomimetic diiron catalysts have been synthesized, drawing inspiration from the active architecture of soluble methane monooxygenase (sMMO). These catalysts have been successfully deployed for the dehydrogenation of indolines, marking a significant advancement in the field. Using density functional theory (DFT) calculations, we have identified a novel mechanistic pathway that governs the dehydrogenation of indolines catalyzed by a biomimetic diiron complex. Specifically, this reaction is facilitated by the transfer of a hybrid atom from the C1 position of the substrate to the distal oxygen atom of the Fe(III)Fe(III)-1,1-μ-hydroperoxy active species. This transfer serves as the rate-limiting step for the heterolytic cleavage of the OO bond, ultimately generating the substrate cation. The mechanism we propose aligns well with mechanistic investigations incorporating both kinetic isotope effect (KIE) measurements and evaluations of stereochemical selectivity. This research contributes to the broader scientific understanding of catalysis involving biomimetic diiron complexes and offers valuable insights into the catalytic behaviors of non-heme diiron metalloenzymes.

Reconstitution of the Final Steps in the Biosynthesis of Valanimycin Reveals the Origin of Its Characteristic Azoxy Moiety

Valanimycin is an azoxy-containing natural product isolated from the fermentation broth of Streptomyces viridifaciens MG456-hF10. While the biosynthesis of valanimycin has been partially characterized, how the azoxy group is constructed remains obscure. Herein, the membrane protein VlmO and the putative hydrazine synthetase ForJ from the formycin biosynthetic pathway are demonstrated to catalyze N-N bond formation converting O-(l-seryl)-isobutyl hydroxylamine into N-(isobutylamino)-l-serine. Subsequent installation of the azoxy group is shown to be catalyzed by the non-heme diiron enzyme VlmB in a reaction in which the N-N single bond in the VlmO/ForJ product is oxidized by four electrons to yield the azoxy group. The catalytic cycle of VlmB appears to begin with a resting μ-oxo diferric complex in VlmB, as supported by Mössbauer spectroscopy. This study also identifies N-(isobutylamino)-d-serine as an alternative substrate for VlmB leading to two azoxy regioisomers. The reactions catalyzed by the kinase VlmJ and the lyase VlmK during the final steps of valanimycin biosynthesis are established as well. The biosynthesis of valanimycin was thus fully reconstituted in vitro using the enzymes VlmO/ForJ, VlmB, VlmJ and VlmK. Importantly, the VlmB-catalyzed reaction represents the first example of enzyme-catalyzed azoxy formation and is expected to proceed by an atypical mechanism.

Excision of a Protein-Derived Amine for p-Aminobenzoate Assembly by the Self-Sacrificial Heterobimetallic Protein CADD

Chlamydia protein associating with death domains (CADD), the founding member of a recently discovered class of nonheme dimetal enzymes termed hemeoxygenase-like dimetaloxidases (HDOs), plays an indispensable role in pathogen survival. CADD orchestrates the biosynthesis of p-aminobenzoic acid (pABA) for integration into folate via the self-sacrificial excision of a protein-derived tyrosine (Tyr27) and several additional processing steps, the nature and timing of which have yet to be fully clarified. Nuclear magnetic resonance (NMR) and proteomics approaches reveal the source and probable timing of amine installation by a neighboring lysine (Lys152). Turnover studies using limiting O2 have identified a para-aminobenzaldehyde (pABCHO) metabolic intermediate that is formed on the path to pABA formation. The use of pABCHO and other probe substrates shows that the heterobimetallic Fe/Mn form of the enzyme is capable of oxygen insertion to generate the pABA-carboxylate.

Oxidative rearrangement of tryptophan to indole nitrile by a single diiron enzyme

Nitriles are uncommon in nature and are typically constructed from oximes via the oxidative decarboxylation of amino acid substrates or from the derivatization of carboxylic acids. Here we report a third strategy of nitrile biosynthesis featuring the cyanobacterial nitrile synthase AetD. During the biosynthesis of the 'eagle-killing' neurotoxin, aetokthonotoxin, AetD converts the alanyl side chain of 5,7-dibromo-L-tryptophan to a nitrile. Employing a combination of structural, biochemical, and biophysical techniques, we characterized AetD as a non-heme diiron enzyme that belongs to the emerging Heme Oxygenase-like Diiron Oxidase and Oxygenase (HDO) superfamily. High-resolution crystal structures of AetD together with the identification of catalytically relevant products provide mechanistic insights into how AetD affords this unique transformation that we propose proceeds via an aziridine intermediate. Our work presents a new paradigm for nitrile biogenesis and portrays a substrate binding and metallocofactor assembly mechanism that may be shared among other HDO enzymes.

The Chlamydia trachomatis p-aminobenzoate synthase CADD is a manganese-dependent oxygenase that uses its own amino acid residues as substrates

CADD (chlamydia protein associating with death domains) is a p-aminobenzoate (pAB) synthase involved in a noncanonical route for tetrahydrofolate biosynthesis in Chlamydia trachomatis. Although previously implicated to employ a diiron cofactor, here, we show that pAB synthesis by CADD requires manganese and the physiological cofactor is most likely a heterodinuclear Mn/Fe cluster. Isotope-labeling experiments revealed that the two oxygen atoms in the carboxylic acid portion of pAB are derived from molecular oxygen. Further, mass spectrometry-based proteomic analyses of CADD-derived peptides demonstrated a glycine substitution at Tyr27, providing strong evidence that this residue is sacrificed for pAB synthesis. Additionally, Lys152 was deaminated and oxidized to aminoadipic acid, supporting its proposed role as a sacrificial amino group donor.

Methods for Biophysical Characterization of SznF, a Member of the Heme-Oxygenase-Like Diiron Oxidase/Oxygenase Superfamily

Nonheme diiron enzymes harness the chemical potential of oxygen to catalyze challenging reactions in biology. In their resting state, these enzymes have a diferrous cofactor that is coordinated by histidine and carboxylate ligands. Upon exposure to oxygen, the cofactor oxidizes to its diferric state forming a peroxo- adduct, capable of catalyzing a wide range of oxidative chemistries such as desaturation and heteroatom oxidation. Despite their versatility and prowess, an emerging subset of nonheme diiron enzymes has inherent cofactor instability making them resistant to structural characterization. This feature is widespread among members of the heme-oxygenase-like diiron oxidase/oxygenase (HDO) superfamily. HDOs have a flexible core structure that remodels upon metal binding. Although ~9600 HDOs have been unearthed, few have undergone functional characterization to date. In this chapter, we describe the methods that have been used to characterize the HDO N-oxygenase, SznF. We demonstrate the overexpression and purification of apo-SznF and methodology specifically designed to aid in obtaining an X-ray structure of holo-SznF. We also describe the characterization of the transient SznF-peroxo-Fe(III)₂ complex by stopped-flow absorption and Mössbauer spectroscopies. These studies provide the framework for the characterization of new members of the HDO superfamily.

Self-sacrificial tyrosine cleavage by an Fe:Mn oxygenase for the biosynthesis of para-aminobenzoate in Chlamydia trachomatis

Chlamydia protein associating with death domains (CADD) is involved in the biosynthesis of para-aminobenzoate (pABA), an essential component of the folate cofactor that is required for the survival and proliferation of the human pathogen Chlamydia trachomatis. The pathway used by Chlamydiae for pABA synthesis differs from the canonical multi-enzyme pathway used by most bacteria that relies on chorismate as a metabolic precursor. Rather, recent work showed pABA formation by CADD derives from l-tyrosine. As a member of the emerging superfamily of heme oxygenase-like diiron oxidases (HDOs), CADD was proposed to use a diiron cofactor for catalysis. However, we report maximal pABA formation by CADD occurs upon the addition of both iron and manganese, which implicates a heterobimetallic Fe:Mn cluster is the catalytically active form. Isotopic labeling experiments and proteomics studies show that CADD generates pABA from a protein-derived tyrosine (Tyr27), a residue that is ∼14 Å from the dimetal site. We propose that this self-sacrificial reaction occurs through O₂ activation by a probable Fe:Mn cluster through a radical relay mechanism that connects to the "substrate" Tyr, followed by amination and direct oxygen insertion. These results provide the molecular basis for pABA formation in C. trachomatis, which will inform the design of novel therapeutics.

Dioxygen Activation and Nδ,Nε-Dihydroxylation Mechanism Involved in the Formation of N-Nitrosourea Pharmacophore in Streptozotocin Catalyzed by Nonheme Diiron Enzyme SznF

SznF is a nonheme diiron-dependent enzyme that catalyzes the critical N-nitrosation involved in the formation of the N-nitrosourea moiety in the pancreatic cancer drug streptozotocin. The N-nitrosation contains two successive N-hydroxylation and N-nitrosation steps, which are carried out by two separate active sites, namely, the central domain and cupin domain. Recently, the crystal structure of SznF was obtained, and the central domain was proved to contain a diiron cofactor to catalyze the N-hydroxylation. In this work, to gain insights into the O₂ activation and the successive N-hydroxylation mechanism, on the basis of the high-resolution crystal structure, the enzyme-substrate complex models were constructed, and a series of combined QM/MM calculations were performed. Based on our calculations, the activation of O₂ starts from the diiron(II,III)-superoxo (S) to generate the diiron(IV)-oxo species (Q) via a diiron(III,III)-peroxo (P)-like transition state or unstable intermediate (P'), and species P' can be described as a hybridization of diiron(IV)-oxo species and diiron(III,III)-peroxo (P) owing to the long distances of Fe1-Fe2 (4.22 Å) and O1-O2 (1.89 Å), which is different from those of other nonheme diiron enzymes. In the following hydroxylation of N^δ and N^ε, the N^δ-hydroxylation was confirmed to occur first, agreeing with the experimental observations. Because the diiron(IV)-oxo species (Q) is responsible for hydroxylation, the reaction follows the H-abstraction/OH rebound mechanism, and the first abstraction occurs on the N^δ-H rather than N^ε-H, which may be attributed to the different orientation of Fe(IV)-oxo relative to N-H as well as the bond dissociation enthalpies of two N-H bonds. The hydroxylation of N-methyl-L-arginine does not employ the diiron(III,III)-hydroperoxo (P″) to trigger the electrophilic attack of the guanidine to directly form the N-O bond, as previously suggested. In addition, our calculations also revealed that the direct attack of the Fe(IV)═O unit to the N^δ of the substrate corresponds to a higher barrier than that in the H-abstraction/OH rebound mechanism. These results may provide useful information for understanding the formation of the di-hydroxylation intermediate involved in the biosynthesis of N-nitrosation.

Pulsed Multifrequency Electron Paramagnetic Resonance Spectroscopy Reveals Key Branch Points for One- vs Two-Electron Reactivity in Mn/Fe Proteins

Traditionally, the ferritin-like superfamily of proteins was thought to exclusively use a diiron active site in catalyzing a diverse array of oxygen-dependent reactions. In recent years, novel redox-active cofactors featuring heterobimetallic Mn/Fe active sites have been discovered in both the radical-generating R2 subunit of class Ic (R2c) ribonucleotide reductases (RNRs) and the related R2-like ligand-binding oxidases (R2lox). However, the protein-specific factors that differentiate the radical reactivity of R2c from the C-H activation reactions of R2lox remain unknown. In this work, multifrequency pulsed electron paramagnetic resonance (EPR) spectroscopy and ligand hyperfine techniques in conjunction with broken-symmetry density functional theory calculations are used to characterize the molecular and electronic structures of two EPR-active intermediates trapped during aerobic assembly of the R2lox Mn/Fe cofactor. A Mn^III(μ-O)(μ-OH)Fe^III species is identified as the first EPR-active species and represents a common state between the two classes of redox-active Mn/Fe proteins. The species downstream from the Mn^III(μ-O)(μ-OH)Fe^III state exhibits unique EPR properties, including unprecedented spectral breadth and isotope-dependent g-tensors, which are attributed to a weakly coupled, hydrogen-bonded Mn^III(μ-OH)Fe^III species. This final intermediate precedes formation of the Mn^III/Fe^III resting state and is suggested to be relevant to understanding the endogenous reactivity of R2lox.

Substrate-Triggered μ-Peroxodiiron(III) Intermediate in the 4-Chloro-l-Lysine-Fragmenting Heme-Oxygenase-like Diiron Oxidase (HDO) BesC: Substrate Dissociation from, and C4 Targeting by, the Intermediate

The enzyme BesC from the β-ethynyl-l-serine biosynthetic pathway in Streptomyces cattleya fragments 4-chloro-l-lysine (produced from l-Lysine by BesD) to ammonia, formaldehyde, and 4-chloro-l-allylglycine and can analogously fragment l-Lys itself. BesC belongs to the emerging family of O2-activating non-heme-diiron enzymes with the "heme-oxygenase-like" protein fold (HDOs). Here, we show that the binding of l-Lys or an analogue triggers capture of O2 by the protein's diiron(II) cofactor to form a blue μ-peroxodiiron(III) intermediate analogous to those previously characterized in two other HDOs, the olefin-installing fatty acid decarboxylase, UndA, and the guanidino-N-oxygenase domain of SznF. The ∼5- and ∼30-fold faster decay of the intermediate in reactions with 4-thia-l-Lys and (4RS)-chloro-dl-lysine than in the reaction with l-Lys itself and the primary deuterium kinetic isotope effects (D-KIEs) on decay of the intermediate and production of l-allylglycine in the reaction with 4,4,5,5-[2H4]-l-Lys suggest that the peroxide intermediate or a reversibly connected successor complex abstracts a hydrogen atom from C4 to enable olefin formation. Surprisingly, the sluggish substrate l-Lys can dissociate after triggering intermediate formation, thereby allowing one of the better substrates to bind and react. The structure of apo BesC and the demonstrated linkage between Fe(II) and substrate binding suggest that the triggering event involves an induced ordering of ligand-providing helix 3 (α3) of the conditionally stable HDO core. As previously suggested for SznF, the dynamic α3 also likely initiates the spontaneous degradation of the diiron(III) product cluster after decay of the peroxide intermediate, a trait emerging as characteristic of the nascent HDO family.

Probing the Mechanism of Isonitrile Formation by a Non-Heme Iron(II)-Dependent Oxidase/Decarboxylase

The isonitrile moiety is an electron-rich functionality that decorates various bioactive natural products isolated from diverse kingdoms of life. Isonitrile biosynthesis was restricted for over a decade to isonitrile synthases, a family of enzymes catalyzing a condensation reaction between l-Trp/l-Tyr and ribulose-5-phosphate. The discovery of ScoE, a non-heme iron(II) and α-ketoglutarate-dependent dioxygenase, demonstrated an alternative pathway employed by nature for isonitrile installation. Biochemical, crystallographic, and computational investigations of ScoE have previously been reported, yet the isonitrile formation mechanism remains obscure. In the present work, we employed in vitro biochemistry, chemical synthesis, spectroscopy techniques, and computational simulations that enabled us to propose a plausible molecular mechanism for isonitrile formation. Our findings demonstrate that the ScoE reaction initiates with C5 hydroxylation of (R)-3-((carboxymethyl)amino)butanoic acid to generate 1, which undergoes dehydration, presumably mediated by Tyr96 to synthesize 2 in a trans configuration. (R)-3-isocyanobutanoic acid is finally generated through radical-based decarboxylation of 2, instead of the common hydroxylation pathway employed by this enzyme superfamily.

Metalloenzymes for Fatty Acid-Derived Hydrocarbon Biosynthesis: Nature's Cryptic Catalysts

Waning resources, massive energy consumption, everdeepening global warming crisis, and climate change have raised grave concerns regarding continued dependence on fossil fuels as the predominant source of energy and generated tremendous interest for developing biofuels, which are renewable. Hydrocarbon-based 'drop-in' biofuels can be a proper substitute for fossil fuels such as gasoline or jet fuel. In Nature, hydrocarbons are produced by diverse organisms such as insects, plants, bacteria, and cyanobacteria. Metalloenzymes play a crucial role in hydrocarbons biosynthesis, and the past decade has witnessed discoveries of a number of metalloenzymes catalyzing hydrocarbon biosynthesis from fatty acids and their derivatives employing unprecedented mechanisms. These discoveries elucidated the enigma related to the divergent chemistries involved in the catalytic mechanisms of these metalloenzymes. There is substantial diversity in the structure, mode of action, cofactor requirement, and substrate scope among these metalloenzymes. Detailed structural analysis along with mutational studies of some of these enzymes have contributed significantly to identifying the key amino acid residues that dictate substrate specificity and catalytic intricacy. In this Review, we discuss the metalloenzymes that catalyze fatty acid-derived hydrocarbon biosynthesis in various organisms, emphasizing the active site architecture, catalytic mechanism, cofactor requirements, and substrate specificity of these enzymes. Understanding such details is essential for successfully implementing these enzymes in emergent biofuel research through protein engineering and synthetic biology approaches.

Synthetic and biosynthetic routes to nitrogen-nitrogen bonds

The nitrogen-nitrogen bond is a core feature of diverse functional groups like hydrazines, nitrosamines, diazos, and pyrazoles. Such functional groups are found in >300 known natural products. Such N-N bond-containing functional groups are also found in significant percentage of clinical drugs. Therefore, there is wide interest in synthetic and enzymatic methods to form nitrogen-nitrogen bonds. In this review, we summarize synthetic and biosynthetic approaches to diverse nitrogen-nitrogen-bond-containing functional groups, with a focus on biosynthetic pathways and enzymes.

In vitro characterization of a nitro-forming oxygenase involved in 3-(trans-2'-aminocyclopropyl)alanine biosynthesis

In vitro characterization experiments revealed the formations of 3-(trans-2'-aminocyclopropyl)alanine ((3-Acp)Ala) and 3-(trans-2'-nitrocyclopropyl)alanine ((3-Ncp)Ala) are originated via two homologous proteins, BelK and HrmI, which regioselectively catalyze the Nε-oxygenation of l-lysine. The two enzymes belong to the emerging heme-oxygenase-like diiron oxidase and oxygenase (HDO) superfamily and the catalytic center of BelK is validated by homology modeling and site-directed mutations. Based on the in vitro characterization, the biosynthetic pathways of (3-Acp)Ala and (3-Ncp)Ala are proposed.

Identification of Cyclopropane Formation in the Biosyntheses of Hormaomycins and Belactosins: Sequential Nitration and Cyclopropanation by Metalloenzymes

Hormaomycins and belactosins are peptide natural products that contain unusual cyclopropane moieties. Bioinformatics analysis of the corresponding biosynthetic gene clusters showed that two conserved genes, hrmI/belK and hrmJ/belL, were potential candidates for catalyzing cyclopropanation. Using in vivo and in vitro assays, the functions of HrmI/BelK and HrmJ/BelL were established. HrmI and BelK, which are heme oxygenase-like dinuclear iron enzymes, catalyze oxidation of the ϵ-amino group of l-lysine to afford l-6-nitronorleucine. Subsequently, HrmJ and BelL, which are iron- and α-ketoglutarate-dependent oxygenases, effectively convert l-6-nitronorleucine into 3-(trans-2-nitrocyclopropyl)-alanine through C4-C6 bond installation. These observations disclose a novel pathway of cyclopropane ring construction and exemplify the new chemistry involving metalloenzymes in natural product biosynthesis.

BesC Initiates C-C Cleavage through a Substrate-Triggered and Reactive Diferric-Peroxo Intermediate

BesC catalyzes the iron- and O₂-dependent cleavage of 4-chloro-l-lysine to form 4-chloro-l-allylglycine, formaldehyde, and ammonia. This process is a critical step for a biosynthetic pathway that generates a terminal alkyne amino acid which can be leveraged as a useful bio-orthogonal handle for protein labeling. As a member of an emerging family of diiron enzymes that are typified by their heme oxygenase-like fold and a very similar set of coordinating ligands, recently termed HDOs, BesC performs an unusual type of carbon-carbon cleavage reaction that is a significant departure from reactions catalyzed by canonical dinuclear-iron enzymes. Here, we show that BesC activates O₂ in a substrate-gated manner to generate a diferric-peroxo intermediate. Examination of the reactivity of the peroxo intermediate with a series of lysine derivatives demonstrates that BesC initiates this unique reaction trajectory via cleavage of the C4-H bond; this process represents the rate-limiting step in a single turnover reaction. The observed reactivity of BesC represents the first example of a dinuclear-iron enzyme that utilizes a diferric-peroxo intermediate to capably cleave a C-H bond as part of its native function, thus circumventing the formation of a high-valent intermediate more commonly associated with substrate monooxygenations.

Biosynthesis of fluopsin C, a copper-containing antibiotic from Pseudomonas aeruginosa

Metal-binding natural products contribute to metal acquisition and bacterial virulence, but their roles in metal stress response are underexplored. We show that a five-enzyme pathway in Pseudomonas aeruginosa synthesizes a small-molecule copper complex, fluopsin C, in response to elevated copper concentrations. Fluopsin C is a broad-spectrum antibiotic that contains a copper ion chelated by two minimal thiohydroxamates. Biosynthesis of the thiohydroxamate begins with cysteine and requires two lyases, two iron-dependent enzymes, and a methyltransferase. The iron-dependent enzymes remove the carboxyl group and the α carbon from cysteine through decarboxylation, N-hydroxylation, and methylene excision. Conservation of the pathway in P. aeruginosa and other bacteria suggests a common role for fluopsin C in the copper stress response, which involves fusing copper into an antibiotic against other microbes.

Biosynthesis of fosfomycin in pseudomonads reveals an unexpected enzymatic activity in the metallohydrolase superfamily

The epoxide-containing phosphonate natural product fosfomycin is a broad-spectrum antibiotic used in the treatment of cystitis. Fosfomycin is produced by both the plant pathogen Pseudomonas syringae and soil-dwelling streptomycetes. While the streptomycete pathway has recently been fully elucidated, the pseudomonad pathway is still mostly elusive. Through a systematic evaluation of heterologous expression of putative biosynthetic enzymes, we identified the central enzyme responsible for completing the biosynthetic pathway in pseudomonads. The missing transformation involves the oxidative decarboxylation of the intermediate 2-phosphonomethylmalate to a new intermediate, 3-oxo-4-phosphonobutanoate, by PsfC. Crystallographic studies reveal that PsfC unexpectedly belongs to a new class of diiron metalloenzymes that are part of the polymerase and histidinol phosphatase superfamily.

Structure and assembly of the diiron cofactor in the heme-oxygenase-like domain of the N-nitrosourea-producing enzyme SznF

In biosynthesis of the pancreatic cancer drug streptozotocin, the tridomain nonheme-iron oxygenase SznF hydroxylates Nδ and Nω' of Nω-methyl-l-arginine before oxidatively rearranging the triply modified guanidine to the N-methyl-N-nitrosourea pharmacophore. A previously published structure visualized the monoiron cofactor in the enzyme's C-terminal cupin domain, which promotes the final rearrangement, but exhibited disorder and minimal metal occupancy in the site of the proposed diiron cofactor in the N-hydroxylating heme-oxygenase-like (HO-like) central domain. We leveraged our recent observation that the N-oxygenating µ-peroxodiiron(III/III) intermediate can form in the HO-like domain after the apo protein self-assembles its diiron(II/II) cofactor to solve structures of SznF with both of its iron cofactors bound. These structures of a biochemically validated member of the emerging heme-oxygenase-like diiron oxidase and oxygenase (HDO) superfamily with intact diiron cofactor reveal both the large-scale conformational change required to assemble the O2-reactive Fe2(II/II) complex and the structural basis for cofactor instability-a trait shared by the other validated HDOs. During cofactor (dis)assembly, a ligand-harboring core helix dynamically (un)folds. The diiron cofactor also coordinates an unanticipated Glu ligand contributed by an auxiliary helix implicated in substrate binding by docking and molecular dynamics simulations. The additional carboxylate ligand is conserved in another N-oxygenating HDO but not in two HDOs that cleave carbon-hydrogen and carbon-carbon bonds to install olefins. Among ∼9,600 sequences identified bioinformatically as members of the emerging HDO superfamily, ∼25% conserve this additional carboxylate residue and are thus tentatively assigned as N-oxygenases.

High spin polarized Fe2 cluster combined with vicinal nonmetallic sites for catalytic ammonia synthesis from a theoretical perspective

Compared to other Fen (n > 2) clusters, Fe2 cluster catalysts combined with vicinal nonmetallic sites are expected to be an ideal catalyst for ammonia synthesis with a lower N–H formation (0.47 eV) and N–N dissociation (0.50 eV) energy barrier at the same time.

A Peroxodiiron(III/III) Intermediate Mediating Both N-Hydroxylation Steps in Biosynthesis of the N-Nitrosourea Pharmacophore of Streptozotocin by the Multi-domain Metalloenzyme SznF

The alkylating warhead of the pancreatic cancer drug streptozotocin (SZN) contains an N-nitrosourea moiety constructed from Nω-methyl-l-arginine (l-NMA) by the multi-domain metalloenzyme SznF. The enzyme's central heme-oxygenase-like (HO-like) domain sequentially hydroxylates Nδ and Nω' of l-NMA. Its C-terminal cupin domain then rearranges the triply modified arginine to Nδ-hydroxy-Nω-methyl-Nω-nitroso-l-citrulline, the proposed donor of the functional pharmacophore. Here we show that the HO-like domain of SznF can bind Fe(II) and use it to capture O2, forming a peroxo-Fe2(III/III) intermediate. This intermediate has absorption- and Mössbauer-spectroscopic features similar to those of complexes previously trapped in ferritin-like diiron oxidases and oxygenases (FDOs) and, more recently, the HO-like fatty acid oxidase UndA. The SznF peroxo-Fe2(III/III) complex is an intermediate in both hydroxylation steps, as shown by the concentration-dependent acceleration of its decay upon exposure to either l-NMA or Nδ-hydroxy-Nω-methyl-l-Arg (l-HMA). The Fe2(III/III) cluster produced upon decay of the intermediate has a small Mössbauer quadrupole splitting parameter, implying that, unlike the corresponding product states of many FDOs, it lacks an oxo-bridge. The subsequent decomposition of the product cluster to one or more paramagnetic Fe(III) species over several hours explains why SznF was previously purified and crystallographically characterized without its cofactor. Programmed instability of the oxidized form of the cofactor appears to be a unifying characteristic of the emerging superfamily of HO-like diiron oxidases and oxygenases (HDOs).

Discovery of CC bond-forming and bond-breaking radical enzymes: enabling transformations for metabolic engineering

•

Radical enzymes catalyze difficult C—C bond-forming and bond-breaking transformations.

•

Radical enzymes catalyzing unprecedented reactions continue to be discovered.

•

The products of radical enzymes are often of high value.

•

Understanding mechanisms of radical enzymes will aid metabolic engineering efforts.

Radical enzymes catalyze some of the most chemically challenging C—C bond-forming and bond-breaking reactions. Advances in DNA sequencing have accelerated the discovery of radical enzymes from microbes, including radical S-adenosylmethionine (rSAM) enzymes, glycyl radical enzymes (GREs), and diiron enzymes. These enzymes catalyze various reactions that yield products of industrial relevance (e.g. aromatics, hydrocarbons, and natural product derivatives), making their incorporation into engineered metabolic pathways enticing. Elucidating the mechanisms of radical enzymes that cleave and construct C—C bonds will enable further enzyme discovery and engineering efforts.

Mechanism of fatty acid decarboxylation catalyzed by a non-heme iron oxidase (UndA): a QM/MM study

UndA is a non-heme iron enzyme that was recognized to catalyze the decarboxylation of medium chain (C10-C14) fatty acids to produce trace amounts of 1-alkenes. Owing to the electron imbalance during the oxidative decarboxylation of the substrate and the reduction of O₂, only single turnover reactions were obtained in UndA in vitro assays. Unlike the general non-heme iron enzymes, the catalytic efficiency of UndA is quite low. According to the previous proposal, both Fe^III-OO˙^- and Fe^IV[double bond, length as m-dash]O complexes may abstract the β-H of fatty acids to trigger the oxidative decarboxylation reaction. Herein, on the basis of the crystal structures of UndA in complex with the substrate analogues, we constructed a series of computational models and performed quantum mechanics/molecular mechanics (QM/MM) calculations to explore the UndA-catalyzed decarboxylation using lauric acid as the substrate. Our calculation results reveal that only the Fe^III-OO˙^- complex can initiate the decarboxylation, and the substrate (lauric acid) should monodentately coordinate to the Fe center to facilitate the β-H abstraction. In addition, the monodentate coordination corresponds to higher relative energy than the bidentate mode, which may explain the low efficiency of UndA. It is also revealed that as long as the β-H is extracted by the Fe^III-OO˙^-, the decarboxylation of the substrate radical is quite easy, and an electron transfer from the substrate to the iron center is the prerequisite. For the Fe^IV[double bond, length as m-dash]O complex, since the β-H is far from the O_Fe atom and the angle of ∠Fe-O-H is 53.1°, the H-abstraction is calculated to be difficult.

Substrate-Triggered Formation of a Peroxo-Fe2(III/III) Intermediate during Fatty Acid Decarboxylation by UndA

The iron-dependent oxidase UndA cleaves one C3-H bond and the C1-C2 bond of dodecanoic acid to produce 1-undecene and CO₂. A published X-ray crystal structure showed that UndA has a heme-oxygenase-like fold, thus associating it with a structural superfamily that includes known and postulated non-heme diiron proteins, but revealed only a single iron ion in the active site. Mechanisms proposed for initiation of decarboxylation by cleavage of the C3-H bond using a monoiron cofactor to activate O₂ necessarily invoked unusual or potentially unfeasible steps. Here we present spectroscopic, crystallographic, and biochemical evidence that the cofactor of Pseudomonas fluorescens Pf-5 UndA is actually a diiron cluster and show that binding of the substrate triggers rapid addition of O₂ to the Fe₂(II/II) cofactor to produce a transient peroxo-Fe₂(III/III) intermediate. The observations of a diiron cofactor and substrate-triggered formation of a peroxo-Fe₂(III/III) intermediate suggest a small set of possible mechanisms for O₂, C3-H and C1-C2 activation by UndA; these routes obviate the problematic steps of the earlier hypotheses that invoked a single iron.