Semi-artificial Photosynthetic CO2 Reduction through Purple Membrane Re-engineering with Semiconductor

Revisiting Solar Energy Flow in Nanomaterial-Microorganism Hybrid Systems

Nanomaterial-microorganism hybrid systems (NMHSs), integrating semiconductor nanomaterials with microorganisms, present a promising platform for broadband solar energy harvesting, high-efficiency carbon reduction, and sustainable chemical production. While studies underscore its potential in diverse solar-to-chemical energy conversions, prevailing NMHSs grapple with suboptimal energy conversion efficiency. Such limitations stem predominantly from an insufficient systematic exploration of the mechanisms dictating solar energy flow. This review provides a systematic overview of the notable advancements in this nascent field, with a particular focus on the discussion of three pivotal steps of energy flow: solar energy capture, cross-membrane energy transport, and energy conversion into chemicals. While key challenges faced in each stage are independently identified and discussed, viable solutions are correspondingly postulated. In view of the interplay of the three steps in affecting the overall efficiency of solar-to-chemical energy conversion, subsequent discussions thus take an integrative and systematic viewpoint to comprehend, analyze and improve the solar energy flow in the current NMHSs of different configurations, and highlighting the contemporary techniques that can be employed to investigate various aspects of energy flow within NMHSs. Finally, a concluding section summarizes opportunities for future research, providing a roadmap for the continued development and optimization of NMHSs.

Bioinspired Light-Driven Proton Pump: Engineering Band Alignment of WS2 with PEDOT:PSS and PDINN

Bioinspired two-dimensional (2D) nanofluidic systems for photo-induced ion transport have attracted great attention, as they open a new pathway to enabling light-to-ionic energy conversion. However, there is still a great challenge in achieving a satisfactory performance. It is noticed that organic solar cells (OSCs, light-harvesting device based on photovoltaic effect) commonly require hole/electron transport layer materials (TLMs), PEDOT:PSS (PE) and PDINN (PD), respectively, to promote the energy conversion. Inspired by such a strategy, an artificial proton pump by coupling a nanofluidic system with TLMs is proposed, in which the PE- and PD-functionalized tungsten disulfide (WS2) multilayers construct a heterogeneous membrane, realizing an excellent output power of ≈1.13 nW. The proton transport is fine-regulated due to the TLMs-engineered band structure of WS2. Clearly, the incorporating TLMs of OSCs into 2D nanofluidic systems offers a feasible and promising approach for band edge engineering and promoting the light-to-ionic energy conversion.

Catalyzing Artificial Photosynthesis with TiO2 Heterostructures and Hybrids: Emerging Trends in a Classical yet Contemporary Photocatalyst

Titanium dioxide (TiO2) stands out as a versatile transition-metal oxide with applications ranging from energy conversion/storage and environmental remediation to sensors and optoelectronics. While extensively researched for these emerging applications, TiO2 has also achieved commercial success in various fields including paints, inks, pharmaceuticals, food additives, and advanced medicine. Thanks to the tunability of their structural, morphological, optical, and electronic characteristics, TiO2 nanomaterials are among the most researched engineering materials. Besides these inherent advantages, the low cost, low toxicity, and biocompatibility of TiO2 nanomaterials position them as a sustainable choice of functional materials for energy conversion. Although TiO2 is a classical photocatalyst well-known for its structural stability and high surface activity, TiO2-based photocatalysis is still an active area of research particularly in the context of catalyzing artificial photosynthesis. This review provides a comprehensive overview of the latest developments and emerging trends in TiO2 heterostructures and hybrids for artificial photosynthesis. It begins by discussing the common synthesis methods for TiO2 nanomaterials, including hydrothermal synthesis and sol-gel synthesis. It then delves into TiO2 nanomaterials and their photocatalytic mechanisms, highlighting the key advancements that have been made in recent years. The strategies to enhance the photocatalytic efficiency of TiO2, including surface modification, doping modulation, heterojunction construction, and synergy of composite materials, with a specific emphasis on their applications in artificial photosynthesis, are discussed. TiO2-based heterostructures and hybrids present exciting opportunities for catalyzing solar fuel production, organic degradation, and CO2 reduction via artificial photosynthesis. This review offers an overview of the latest trends and advancements, while also highlighting the ongoing challenges and prospects for future developments in this classical yet rapidly evolving field.

Conjugated Molecules Based Multi-Component Artificial Photosynthesis System for Producing Multi-Objective Products

The development of artificial photosynthesis systems that mimics natural photosynthesis can help address the issue of energy scarcity by efficiently utilizing solar energy. Here, it presents liposomes-based artificial photosynthetic nanocapsules (PSNC) integrating photocatalytic, chemical catalytic, and biocatalytic systems through one-pot method. The PSNC contains 5,10,15,20-tetra(4-pyridyl) cobalt-porphyrin, tridipyridyl-ruthenium nitrate, oligo-pphenyl-ethylene-rhodium complex, and creatine kinase, efficiently generating oxygen, nicotinamide adenine dinucleotide (NADH), and adenosine triphosphate with remarkable enhancements of 231%, 30%, and 86%, compared with that of molecules mixing in aqueous solution. Additionally, the versatile PSNC enables simulation of light-independent reactions, achieving a controllable output of various target products. The regenerated NADH within PSNC further facilitates alcohol dehydrogenase, yielding methanol with a notable efficiency improvement of 37%. This work introduces a promising platform for sustainable solar energy conversion and the simultaneous synthesis of multiple valuable products in an ingenious and straightforward way.

H2-driven reduction of CO2 to formate using bacterial plasma membranes

Bacterial membranes shield the intracellular compartment by selectively allowing unwanted substances to enter in, which in turn reduces overall catalytic efficiency. This report presents a model system using the isolated plasma membranes of Citrobacter sp. S-77 that harbor oxygen-stable [NiFe]hydrogenase and [Mo]formate dehydrogenase, which are integrated into a natural catalytic nanodevice through an electron transfer relay. This naturally occurring nanodevice exhibited selectivity and efficiency in catalyzing the H2-driven conversion of CO2 to formate with the rate of 817 mmol·L-1·gprotein-1·h-1 under mild conditions of 30 °C, pH 7.0, and 0.1 MPa. When the isolated plasma membranes of Citrobacter sp. S-77 was immobilized with multi-walled carbon nanotubes and encapsulated in hydrogel beads of gellan-gum cross-linked with calcium ions, the catalyst for formate production remained stable over 10 repeated uses. This paper reports the first case of efficient and selective formate production from H2 and CO2 using bacterial plasma membranes.

Light-Harvesting Artificial Cells Containing Cyanobacteria for CO2 Fixation and Further Metabolism Mimicking

The bottom-up constructed artificial cells help to understand the cell working mechanism and provide the evolution clues for organisms. The energy supply and metabolism mimicry are the key issues in the field of artificial cells. Herein, an artificial cell containing cyanobacteria capable of light harvesting and carbon dioxide fixation is demonstrated to produce glucose molecules by converting light energy into chemical energy. Two downstream "metabolic" pathways starting from glucose molecules are investigated. One involves enzyme cascade reaction to produce H₂ O₂ (assisted by glucose oxidase) first, followed by converting Amplex red to resorufin (assisted by horseradish peroxidase). The other pathway is more biologically relevant. Glucose molecules are dehydrogenated to transfer hydrogens to nicotinamide adenine dinucleotide (NAD⁺ ) for the production of nicotinamide adenine dinucleotide hydride (NADH) molecules in the presence of glucose dehydrogenase. Further, NADH molecules are oxidized into NAD⁺ by pyruvate catalyzed by lactate dehydrogenase, meanwhile, lactate is obtained. Therefore, the cascade cycling of NADH/NAD⁺ is built. The artificial cells built here pave the way for investigating more complicated energy-supplied metabolism inside artificial cells.

Bioinspired Photocatalytic NADH Regeneration by Covalently Metalated Carbon Nitride for Enhanced CO2 Reduction

Natural photosynthesis is a highly unified biocatalytic system, which coupled cofactor (NAD(P)H) regeneration and enzymatic CO₂ reduction efficiently for solar energy conversion. Mimicking nature, a novel system with Rh complex covalently grafted onto NH₂ -functionalized polymeric carbon nitride (NH₂ -PCN) was constructed. The integrated connection of the light-harvesting and electron mediation modules as Rh_m3 -N-PCN could promote the efficient NAD⁺ reduction to NADH. As a result, the integrated system exhibited a conversion of ∼66 % within 20 minutes. By further coupling in situ generated NADH with formate dehydrogenase (FDH), a photoenzymatic production of formic acid (HCOOH) from CO₂ was accomplished. Moreover, by immobilizing FDH onto a hydrophobic membrane, an enhanced HCOOH production of ∼5.0 mM can be obtained due to the concentrated CO₂ on the gas-liquid-solid three-phase interface. Our work herein provides an integrated strategy for coupling the anchored electron mediator with immobilized enzyme for enhanced artificial photosynthesis.

Importance of steric bulkiness of iridium photocatalysts with PNNP tetradentate ligands for CO2 reduction

A series of Ir complexes has been developed as multifunctional photocatalysts for CO₂ reduction to give HCO₂H selectively. The catalytic activities and photophysical properties vary widely across the series, and the bulky group insertion resulted in the formation of HCO₂H and CO with the catalyst turnover number of >10 400.

Photocatalytic CO2 conversion: from C1 products to multi-carbon oxygenates

Photocatalytic CO₂ conversion into high-value chemicals has been emerging as an attractive research direction in achieving carbon resource sustainability. The chemical products can be categorized into C1 and multi-carbon (C₂₊) products. In this review, we describe the recent research progress in photocatalytic CO₂ conversion systems from C1 products to multi-carbon oxygenates, and analyze the reasons related to their catalytic mechanisms, as the production of multi-carbon oxygenates is generally more difficult than that of C1 products. Then we discuss several examples in promoting the photoconversion of CO₂ to value-added multi-carbon products in the aspects of photocatalyst design, mass transfer control, determination of active sites, and intermediate regulation. Finally, we summarize perspectives on the challenges and propose potential directions in this fast-developing field, such as the prospect of CO₂ transformation to long-chain hydrocarbons like salicylic acid or even plastics.

Electrostatically Directed Long-Range Self-Assembly of Nucleotides with Cationic Nanoparticles To Form Multifunctional Bioplasmonic Networks

Precise control over interparticle interactions is essential to retain the functions of individual components in a self-assembled superstructure. Here, we report the design of a multifunctional bioplasmonic network via an electrostatically directed self-assembly process involving adenosine 5'-triphosphate (ATP). The present study unveils the ability of ATP to undergo a long-range self-assembly in the presence of cations and gold nanoparticles (AuNP). Modelling and NMR studies gave a qualitative insight into the major interactions driving the bioplasmonic network formation. ATP-Ca²⁺ coordination helps in regulating the electrostatic interaction, which is crucial in transforming an uncontrolled precipitation into a kinetically controlled aggregation process. Remarkably, ATP and AuNP retained their inherent properties in the multifunctional bioplasmonic network. The generality of electrostatically directed self-assembly process was extended to different nucleotide-nanoparticle systems.

Synthesis, modification and application of titanium dioxide nanoparticles: a review

Titanium dioxide (TiO₂) has been heavily investigated owing to its low cost, benign nature and strong photocatalytic ability. Thus, TiO₂ has broad applications including photocatalysts, Li-ion batteries, solar cells, medical research and so on. However, the performance of TiO₂ is not satisfactory due to many factors such as the broad band gap (3.01 to 3.2 eV) and fast recombination of electron-hole pairs (10^-12 to 10^-11 s). Plenty of work has been undertaken to improve the properties, such as structural and dopant modifications, which broaden the applications of TiO₂. This review mainly discusses the aspects of TiO₂-modified nanoparticles including synthetic methods, modifications and applications.

Abiotic-biotic hybrid for CO2 biomethanation: From electrochemical to photochemical process

Converting CO₂ into sustainable fuels (e.g., CH₄) has great significance to solve carbon emission and energy crisis. Generally, CO₂ methanation needs abundant of energy input to overcome the eight-electron-transfer barrier. Abiotic-biotic hybrid system represents one of the cutting-edge technologies that use renewable electric/solar energy to realize eight-electron-transfer CO₂ biomethanation. However, the incompatible abiotic-biotic hybrid can result in low efficiency of electron transfer and CO₂ biomethanation. Herein, we present the comprehensive review to highlight how to design abiotic-biotic hybrid for electric/solar-driven CO₂ biomethanation. We primarily introduce the CO₂ biomethanation mechanism, and further summarize state-of-the-art electrochemical and photochemical CO₂ biomethanation in hybrid systems. We also propose excellent synthetic biology strategies, which are useful to design tunable methanogenic microorganisms or enzymes when cooperating with electrode/semiconductor in hybrid systems. This review provides theoretical guidance of abiotic-biotic hybrid and also shows the bright future of sustainable fuel production in the form of CO₂ biomethanation.

Augmenting photosynthesis through facile AIEgen-chloroplast conjugation and efficient solar energy utilization

Photosynthesis is regarded as the foundation for sustaining life on our planet. Light-harvesting is the initial step that activates the subsequent photochemical reactions. In the photosystems, chloroplast is the basic light-driven metabolic factory of higher plant cells. However, there is an incomplete match between the solar radiation spectrum and absorption profile of chloroplasts. It is hard for the photosynthetic pigments to fully utilize the sunlight energy. Here, we designed two new aggregation-induced emission (AIE) molecules with activated alkyl groups (TPE-PPO and TPA-TPO). Via a facile metal-free "Click" reaction, we realized the substantial manipulation of live chloroplasts with the AIE luminogens (AIEgens). Owing to the matched photophysical properties, the AIEgens could harvest harmful ultraviolet radiation (HUVR) and photosynthetically inefficient radiation (PIR), and further convert them into photosynthetically active radiation (PAR) for chloroplast absorption. As a result, the conjugated AIEgen-chloroplast exhibited better capability of water splitting and electron separation. It promoted the generation of adenosine triphosphate (ATP), which is an important product of photosynthesis. This work provides an effective strategy for improving plant photosynthesis.

Review on the hazardous applications and photodegradation mechanisms of chlorophenols over different photocatalysts

Chlorophenols are very important environmental pollutants, which have created huge problems for both aquatic and terrestrial lives. Therefore, their removal needs urgent, effective, and advanced technologies to safeguard our environment for future generation. This review encompasses a comprehensive study of the applications of chlorophenols, their hazardous effects and photocatalytic degradation under light illumination. The effect of various factors such as pH and presence of different anions on the photocatalytic oxidation of chlorophenols have been elaborated comprehensively. The production of different oxidizing agents taking part in the photodegradation of chlorophenols are given a bird eye view. The photocatalytic degradation mechanism of different chlorophenols over various photocatalyts has been discussed in more detail and elaborated that how different photocatalysts degrade the same chlorophenols with the aid of different oxidizing agents produced during photocatalysis. Finally, a future perspective has been given to deal with the effective removal of these hazardous pollutants from the environment.

Fusion of purple membranes triggered by immobilization on carbon nanomembranes

A freestanding ultrathin hybrid membrane was synthesized comprising two functional layers, that is, first, a carbon nanomembrane (CNM) produced by electron irradiation-induced cross-linking of a self-assembled monolayer (SAM) of 4'-nitro-1,1'-biphenyl-4-thiol (NBPT) and second, purple membrane (PM) containing genetically modified bacteriorhodopsin (BR) carrying a C-terminal His-tag. The NBPT-CNM was further modified to carry nitrilotriacetic acid (NTA) terminal groups for the interaction with the His-tagged PMs forming a quasi-monolayer of His-tagged PM on top of the CNM-NTA. The formation of the Ni-NTA/His-tag complex leads to the unidirectional orientation of PM on the CNM substrate. Electrophoretic sedimentation was employed to optimize the surface coverage and to close gaps between the PM patches. This procedure for the immobilization of oriented dense PM facilitates the spontaneous fusion of individual PM patches, forming larger membrane areas. This is, to our knowledge, the very first procedure described to induce the oriented fusion of PM on a solid support. The resulting hybrid membrane has a potential application as a light-driven two-dimensional proton-pumping membrane, for instance, for light-driven seawater desalination as envisioned soon after the discovery of PM.

Synthesis and characterization of iron oxide superparticles with various polymers

Iron oxide superparticles referring to a cluster of smaller nanoparticles have recently attracted much attention because of their enhanced magnetic moments but maintaining superparamagnetic behavior. In this study, iron oxide superparticles have been synthesized using a solvothermal method in the presence of six different polymers (e.g., sodium polyacrylate, pectin sodium alginate, chitosan oligosaccharides, polyethylene glycol, and polyvinylpyrrolidine). The functional group variation in these polymers affected their interactions with precursor iron ions, and subsequently influenced crystalline grain sizes within superparticles and their magnetic properties. These superparticles were extensively characterized by transmission electron microscopy, dynamic light scattering, x-ray diffraction, Fourier transform infrared spectroscopy, and vibrating sample magnetometry.

Recent advances in engineering active sites for photocatalytic CO2 reduction

The photocatalytic conversion of green-house gas CO₂ into high value-added carbonaceous fuels and chemicals through harvesting solar energy is a great promising strategy for simultaneously tackling global environmental issues and the energy crisis. Considering the vital role of active sites in determining the activity and selectivity in photocatalytic CO₂ reduction reactions, great efforts have been directed toward engineering active sites for fabricating efficient photocatalysts. This review highlights recent advances in the strategies for engineering active sites on surfaces and in open frameworks toward photocatalytic CO₂ reduction, referring to surface vacancies, doped heteroatoms, functional groups, loaded metal nanoparticles, crystal facets, heterogeneous/homogeneous single-site catalysts and metal nodes/organic linkers in metal organic frameworks.

A redox interaction-engaged strategy for multicomponent nanomaterials

The review article focuses on the redox interaction-engaged strategy that offers a powerful way to construct multicomponent nanomaterials with precisely-controlled size, shape, composition and hybridization of nanostructures.