Controlled Redox of Lithium-Ion Endohedral Fullerene for Efficient and Stable Metal Electrode-Free Perovskite Solar Cells

Highly Efficient and Stable Perovskite Solar Modules Based on FcPF6 Engineered Spiro-OMeTAD Hole Transporting Layer

Li-TFSI doped spiro-OMeTAD is widely recognized as a beneficial hole transport layer (HTL) in perovskite solar cells (PSCs), contributing to high device efficiencies. However, the uncontrolled migration of lithium ions (Li+) during device operation has impeded its broad adoption in scalable and stable photovoltaic modules. Herein, an additive strategy is proposed by employing ferrocenium hexafluorophosphate (FcPF6) as a relay medium to enhance the hole extraction capability of the spiro-OMeTAD via the instant oxidation function. Besides, the novel Fc-Li interaction effectively restricts the movement of Li+. Simultaneously, the dissociative hexafluorophosphate group is cleverly exploited to regulate the unstable iodide species on the perovskite surface, further inhibiting the formation of migration channels and stabilizing the interfaces. This modification leads to power conversion efficiencies (PCEs) reaching 22.13% and 20.27% in 36 cm2 (active area of 18 cm2) and 100 cm2 (active area of 56 cm2) perovskite solar modules (PSMs), respectively, with exceptional operational stability obtained for over 1000 h under the ISOS-L-1 procedure. The novel FcPF6-based engineering approach is pivotal for advancing the industrialization of PSCs, particularly those relying on high-performance spiro-OMeTAD- based HTLs.

Beyond Planar Structure: Curved π-Conjugated Molecules for High-Performing and Stable Perovskite Solar Cells

Perovskite solar cell (PSC) shows a great potential to become the next-generation photovoltaic technology, which has stimulated researchers to engineer materials and to innovate device architectures for promoting device performance and stability. As the power conversion efficiency (PCE) keeps advancing, the importance of exploring multifunctional materials for the PSCs has been increasingly recognized. Considerable attention has been directed to the design and synthesis of novel organic π-conjugated molecules, particularly the emerging curved ones, which can perform various unmatched functions for PSCs. In this review, the characteristics of three representative such curved π-conjugated molecules (fullerene, corannulene and helicene) and the recent progress concerning the application of these molecules in state-of-the-art PSCs are summarized and discussed holistically. With this discussion, we hope to provide a fresh perspective on the structure-property relation of these unique materials toward high-performance and high-stability PSCs.

Synthesis and Characterization of Ionic Li+ @C70 Endohedral Fullerene

Ion-endohedral-fullerene has attracted growing interest due to the unique electronic and structural characteristics arising from its distinctive ionic nature. Although there has been only one reported ion-encapsulated fullerene, Li+ @C60 , a significant number of fundamental and applied studies have been conducted, making a substantial impact not only in chemistry and physics but also across various interdisciplinary research fields. Nevertheless, studies on ion-endohedral fullerenes are still in their infancy due to the limitations in variety, and hence, it remains an open question how the size and symmetry of fullerene, as well as the motion and position of the encapsulated ion, affect their physical/chemical properties. Herein, we report the synthesis of lithium-ion-endohedral [70]fullerene (Li+ @C70 X- , X=PF6 - and TFSI- ), a novel ionic endohedral fullerene. X-ray crystallography confirmed the encapsulation of Li+ by C70 cage as well as its ion-pair structure stabilized by external TFSI- counter anion. The encapsulated Li+ drastically lowered the orbital energy of the C70 cage by Coulomb interactions but did not affect the orbital energy gap and degeneracy. DFT studies were also performed, which supported the experimentally observed electronic effects caused by the encapsulated Li+ .

Comprehensive quantum chemical study of the associative complex of para-aminobenzoic acid and 7-diethylamino 4-methyl coumarin by adsorption and aromatic bridges

CONTEXT

The present study accounts for the quantum chemical and nonlinear optical properties of the combination of para-aminobenzoic acid and 7-diethylamino 4-methyl coumarin. Three different complexes were designed, surface interaction (adsorption) and two by connecting both molecules with π-bridge benzene and biphenyl. The amino and carboxyl groups were observed to behave as strong donor and acceptor sites in all the complexes. The band gap of the adsorbed complex was found more suitable. The absorption wavelength and intensity both were seen to increase with the increase in the number of benzene rings in the π-bridge. The values of first- and second-order hyperpolarizability suggest the improved nonlinear optical responses of the introduced complexes. Additionally, the negative value of second-order hyperpolarizability suggests the possibility of the occurrence of reverse saturable absorption in these combinations. The reported work gives theoretical insights into the nonlinear optical properties of the combination of para-aminobenzoic acid and 7-diethylamino 4-methyl coumarin.

METHODS

The molecular modeling and the quantum chemical studies were performed with Gaussian software packages. The standard B3LYP-6-311++G(d,p) basis functionals were used for energy minimization and other spectral calculations. All the surface analyses reported here are obtained by employing Multiwfn software. The chemical reactivity was established by the global reactivity descriptors. The intramolecular interactions and charge localization were stated using inter-fragment charge transfer analysis.

Iodonium Initiators: Paving the Air-free Oxidation of Spiro-OMeTAD for Efficient and Stable Perovskite Solar Cells

To date, perovskite solar cells (pero-SCs) with doped 2,2',7,7'-tetrakis(N,N-di-p-methoxyphenylamine)-9,9'-spirobifluorene (Spiro-OMeTAD) hole transporting layers (HTLs) have shown the highest recorded power conversion efficiencies (PCEs). However, their commercialization is still impeded by poor device stability owing to the hygroscopic lithium bis(trifluoromethanesulfonyl)imide and volatile 4-tert-butylpyridine dopants as well as time-consuming oxidation in air. In this study, we explored a series of single-component iodonium initiators with strong oxidability and different electron delocalization properties to precisely manipulate the oxidation states of Spiro-OMeTAD without air assistance, and the oxidation mechanism was clearly understood. Iodine (III) in the diphenyliodonium cation (IP+ ) can accept a single electron from Spiro-OMeTAD and forms Spiro-OMeTAD⋅+ owing to its strong oxidability. Moreover, because of the coordination of the strongly delocalized TFSI- with Spiro-OMeTAD⋅+ in a stable radical complex, the resulting hole mobility was 30 times higher than that of pristine Spiro-OMeTAD. In addition, the IP-TFSI initiator facilitated the growth of a homogeneous and pinhole-free Spiro-OMeTAD film. The pero-SCs based on this oxidizing HTL showed excellent efficiencies of 25.16 % (certified: 24.85 % for 0.062-cm2 ) and 20.71 % for a 15.03-cm2 module as well as remarkable overall stability.

Inhibition of Ion Migration for Highly Efficient and Stable Perovskite Solar Cells

In recent years, organic-inorganic halide perovskites are now emerging as the most attractive alternatives for next-generation photovoltaic devices, due to their excellent optoelectronic characteristics and low manufacturing cost. However, the resultant perovskite solar cells (PVSCs) are intrinsically unstable owing to ion migration, which severely impedes performance enhancement, even with device encapsulation. There is no doubt that the investigation of ion migration and the summarization of recent advances in inhibition strategies are necessary to develop "state-of-the-art" PVSCs with high intrinsic stability for accelerated commercialization. This review systematically elaborates on the generation and fundamental mechanisms of ion migration in PVSCs, the impact of ion migration on hysteresis, phase segregation, and operational stability, and the characterizations for ion migration in PVSCs. Then, many related works on the strategies for inhibiting ion migration toward highly efficient and stable PVSCs are summarized. Finally, the perspectives on the current obstacles and prospective strategies for inhibition of ion migration in PVSCs to boost operational stability and meet all of the requirements for commercialization success are summarized.

Light-Triggered Sustainable Defect-Passivation for Stable Perovskite Photovoltaics

The generation of photoinduced defects and freely moving halogen ions is dynamically updated in real time. Accordingly, most reported strategies are static and short-term, which make their improvements in photostability very limited. Therefore, seeking new passivation strategies to match the dynamic characteristics of defect generation is very urgent. Without newly generated defects, a passivation molecule should exist in the configuration that would not become the initiation sites for defect generation. With newly generated defects, the passivation molecule should transfer into the other configuration that possesses the passivation sites. Herein, a classical photoisomeric molecule, spiropyran, is adopted, whose pre- and post-isomeric forms meet the requirements for two different configurations, to realize the state transition once the photoinduced defects appear during subsequent operation and dynamic capture for continuous renewal of defects. Consequently, spiropyrans work as light-triggered and self-healing sustainable passivation sites to realize continuous defect repair. The target devices retain 93% and 99% of their initial power conversion efficiencies after 456 h aging under ultraviolet illumination and 1200 h aging under full-spectrum illumination, respectively. This work provides a novel concept of sustainable passivation strategy to realize continuous defect-passivation and film-healing in perovskite photovoltaics.

Constructing molecular bridge for high-efficiency and stable perovskite solar cells based on P3HT

Poly (3-hexylthiophene) (P3HT) is one of the most attractive hole transport materials (HTMs) for the pursuit of stable, low-cost, and high-efficiency perovskite solar cells (PSCs). However, the poor contact and the severe recombination at P3HT/perovskite interface lead to a low power conversion efficiency (PCE). Thus, we construct a molecular bridge, 2-((7-(4-(bis(4-methoxyphenyl)amino)phenyl)−10-(2-(2-ethoxyethoxy)ethyl)−10H-phenoxazin-3-yl)methylene)malononitrile (MDN), whose malononitrile group can anchor the perovskite surface while the triphenylamine group can form π−π stacking with P3HT, to form a charge transport channel. In addition, MDN is also found effectively passivate the defects and reduce the recombination to a large extent. Finally, a PCE of 22.87% has been achieved with MDN-doped P3HT (M-P3HT) as HTM, much higher than the efficiency of PSCs with pristine P3HT. Furthermore, MDN gives the un-encapsulated device enhanced long-term stability that 92% of its initial efficiency maintain even after two months of aging at 75% relative humidity (RH) follow by one month of aging at 85% RH in the atmosphere, and the PCE does not change after operating at the maximum power point (MPP) under 1 sun illumination (~45 oC in N2) over 500 hours.

Spiro-OMeTAD-Based Hole Transport Layer Engineering toward Stable Perovskite Solar Cells

Perovskite solar cells (PSCs) have undergone unprecedented growth in the past decade as an emerging photovoltaic technology. Up till now, the power conversion efficiency of PSCs has exceeded 25% that rivals silicon solar cells and there is still room for further enhancement. However, the development in long-term stability lags far behind, which remains a great concern for the commercial application in the future. The device instability mainly arises from the functional components, including perovskite film, charge transport layers, and electrodes along with the involved interfaces. As the most widely studied hole transport layer at the current stage, 2,2',7,7'-tetrakis(N,N-di(4-methoxyphenyl)amino)-9,9-spirobifluorene (Spiro-OMeTAD) helps contribute to the achievement of record efficiency but it weakens the device stability due to the doping-induced side effects such as hygroscopicity and ion migration. Great efforts are devoted to boosting the stability of Spiro-OMeTAD while maintaining excellent photovoltaic performance. In this review, the fundamental properties of Spiro-OMeTAD have been summarized and the recent advances in engineering Spiro-OMeTAD-based hole transport layer for the sake of highly efficient PSCs with enhanced longevity are highlighted. In the end, an outlook for the further optimization of Spiro-OMeTAD is provided and the issues related to large-scale production are discussed.

Crowning Lithium Ions in Hole-Transport Layer toward Stable Perovskite Solar Cells

State-of-the-art perovskite solar cells (PSCs) exhibit comparable power conversion efficiency (PCE) to that of silicon photovoltaic devices. However, the device stability remains a major obstacle that restricts widespread application. Doping-induced hygroscopicity, ion diffusion, and use of polar solvents in the hole-transport layer are detrimental factors for performance degradation of PSCs. Here, phase-transfer-catalyzed LiTFSI doping in Spiro-OMeTAD is developed to address these negative impacts. 12-Crown-4 as an efficient phase-transfer catalyst promotes the dissolution of LiTFSI without requiring acetonitrile. A combined experimental and theoretical study demonstrates the host-guest interaction between Li⁺ ions and 12-crown-4. Crowning Li⁺ ions by forming more stable and less diffusive crown-ether-Li⁺ complexes retards the generation of hygroscopic lithium oxides and mitigates Li⁺ -ion migration. Optimized PSCs deliver enhanced PCE and significantly improved stability under humid and thermal conditions compared with a control device. This method can also be applied to dope π-conjugated polymer. The findings provide a facile avenue to improve the long-term stability of PSCs.

Highly Crystalline Graphene as the Atomic 2D Blanket of a Perovskite Absorber for Enhanced Photovoltaic Performance

Perovskite solar cells (PSCs) have demonstrated enormous potential for next-generation low-cost photovoltaics. However, due to the intrinsically low bond energy of the perovskite lattice, the long-term stability is normally undermined by ion migration initiated by the electric field and atmospheric conditions. Therefore, ideal ion migration inhibition is important to achieve an enhanced stability of PSCs. Herein, we first introduce a chemical vapor deposition (CVD) fabricated highly crystalline graphene as an atomic 2D blanket directly for the perovskite absorber of PSCs. Iodine and lithium ion migration is effectively inhibited for perovskite solar cells under a continuous static electric field. The water and oxygen corrosion of the unencapsulated device has been dramatically mitigated with atomic graphene blanketing on the perovskite film. With triphenylamine (TPA) molecule modification, the photoconversion efficiencies (PCEs) of the blanketed devices reach 21.54%. The sample with blanket graphene maintains 85% of the initial efficiency, in comparison to 52% of the control sample under voltage bias. After 600 h of aging at 25 °C and 55 RH%, 86% in comparison to <30% of the PCE for the control device is obtained for the sample with a graphene blanket. Thus, we propose that crystalline graphene has an excellent and effective ion-blocking blanket potential for highly stable perovskite devices.

Synergistic Effect of Defect Passivation and Crystallization Control Enabled by Bifunctional Additives for Carbon-Based Mesoscopic Perovskite Solar Cells

The emerging carbon-based mesoscopic perovskite solar cells (MPSCs) are known as one of the most promising candidates for photovoltaic applications thanks to their screen-printing process and excellent stability. Unfortunately, they usually suffer from serious defects because it is challenging to realize sufficient mesopore filling of the perovskite precursor solution throughout the triple-mesoporous scaffold. Herein, a bifunctional additive, biuret, endowed with both carbonyl and amino groups, was designed to realize a convenient fabrication approach for controllable crystallization of the precursor solution. Owing to the strong coordination ability with perovskite components, the incorporation of biuret can not only regulate crystallization kinetics allowing for the growth of high-quality perovskite crystals but also associate with uncoordinated ions for defect passivation to enhance the overall photovoltaic performance of MPSCs. A champion power conversion efficiency (PCE) of 13.42% with an enhanced short-circuit current density of 19.49 mA cm^-2 and a much higher open-circuit voltage of 0.96 V was achieved for the device doped with 3 mol % biuret, which is 26% higher than that of the control device (10.66%). Moreover, the unencapsulated devices with biuret incorporation demonstrated superior stability, maintaining over 90% of the original PCE after 50 days of storage under ambient conditions. This work helps exploit bifunctional additive strategies for simultaneous defect passivation and crystallization control toward high-efficiency and long-term stability of carbon-based MPSCs.

A Facile and Effective Ozone Exposure Method for Wettability and Energy-Level Tuning of Hole-Transporting Layers in Lead-Free Tin Perovskite Solar Cells

Lead-free perovskite solar cells (PSCs) have attracted interest among scientists searching for eco-friendly energy harvesting devices. Herein, the effects of ozone exposure on poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) in lead-free tin halide PSCs as a facile and low-cost process for improving device performance are analyzed. Two types of tin-based PSCs and one typical lead-based PSC were fabricated. The ozone exposure on PEDOT:PSS increases the short-circuit current density (J_SC) and the fill factor (FF) of PSCs in all cases with perovskite grain enlargement and hole-mobility enhancement of the devices, respectively. For open-circuit voltage (V_OC), the outcome depends on the band gap and the energy levels of the perovskite films. While ozone exposure treatment is favorable for PEA_0.15FA_0.85SnI₃-based tin PSCs, V_OC decreases with ozone exposure in the case of Ge:EDA_0.01FA_0.98SnI₃-based tin PSCs because of a misalignment of the energy levels. Regardless, the efficiency of PEA_0.15FA_0.85SnI₃-based tin PSCs increases from 8.7 to 10.1% when measured inside a glovebox upon ozone exposure of PEDOT:PSS. The efficiency of Ge:EDA_0.01FA_0.98SnI₃-based tin PSCs increases from 6.8 to 8.1%, and the devices retain an efficiency of 5.0% even after 50 days in air.

Multi-Walled Carbon Nanotube-Assisted Encapsulation Approach for Stable Perovskite Solar Cells

Perovskite solar cells (PSCs) are regarded as the next-generation thin-film energy harvester, owing to their high performance. However, there is a lack of studies on their encapsulation technology, which is critical for resolving their shortcomings, such as their degradation by oxygen and moisture. It is determined that the moisture intrusion and the heat trapped within the encapsulating cover glass of PSCs influenced the operating stability of the devices. Therefore, we improved the moisture and oxygen barrier ability and heat releasing capability in the passivation of PSCs by adding multi-walled carbon nanotubes to the epoxy resin used for encapsulation. The 0.5 wt% of carbon nanotube-added resin-based encapsulated PSCs exhibited a more stable operation with a ca. 30% efficiency decrease compared to the ca. 63% decrease in the reference devices over one week under continuous operation. Specifically, the short-circuit current density and the fill factor, which are affected by moisture and oxygen-driven degradation, as well as the open-circuit voltage, which is affected by thermal damage, were higher for the multi-walled carbon nanotube-added encapsulated devices than the control devices, after the stability test.

Environmentally Compatible Lead-Free Perovskite Solar Cells and Their Potential as Light Harvesters in Energy Storage Systems

Next-generation renewable energy sources and perovskite solar cells have revolutionised photovoltaics research and the photovoltaic industry. However, the presence of toxic lead in perovskite solar cells hampers their commercialisation. Lead-free tin-based perovskite solar cells are a potential alternative solution to this problem; however, numerous technological issues must be addressed before the efficiency and stability of tin-based perovskite solar cells can match those of lead-based perovskite solar cells. This report summarizes the development of lead-free tin-based perovskite solar cells from their conception to the most recent improvements. Further, the methods by which the issue of the oxidation of tin perovskites has been resolved, thereby enhancing the device performance and stability, are discussed in chronological order. In addition, the potential of lead-free tin-based perovskite solar cells in energy storage systems, that is, when they are integrated with batteries, is examined. Finally, we propose a research direction for tin-based perovskite solar cells in the context of battery applications.

Water-Repellent Perovskites Induced by a Blend of Organic Halide Salts for Efficient and Stable Solar Cells

Despite tremendous progress in the power conversion efficiency (PCE) of perovskite solar cells (PeSCs), the long-term stability issue remains a significant challenge for commercialization. In this study, by blending organic halide salts, phenylethylammonium halide (PEAX, X = I, Br), with CH₃NH₃PbI₃ (MAPbI₃), we achieved remarkable enhancements in the water-repellency of perovskite films and long-term stability of PeSCs, together with enhanced PCE. The hydrophobic aromatic PEA⁺ group in PEAX protects the perovskite film from destruction by water. In addition, the smaller halide Br^- in PEABr restructures MAPbI₃ to form MAPbI_3-xBr_x during post-annealing, leading to lattice contraction with beneficial crystallization quality. The perovskite films modified by PEAX exhibited excellent water resistance. When the perovskite films were directly immersed in water, no obvious decompositions were observed, even after 60 s. The PEAX-decorated PeSCs exhibited considerable long-term stability. Under high-humidity conditions (60 ± 5%), the PEAX-decorated PeSCs held 80.5% for PEAI and 85.2% for PEABr of their original PCE after exposure for 100 h, whereas the pristine PeSC device lost more than 99% of its initial PCE after exposure for 60 h under the same conditions. Moreover, compared to the pristine device with a PCE of 13.28%, the PEAX-decorated PeSCs exhibited enhanced PCEs of 17.33% for the PEAI device and 17.18% for the PEABr device.

Ultrafast Transfer and Transient Entrapment of Photoexcited Mg Electron in Mg@C_{60}

Electron relaxation is studied in endofullerene Mg@C_{60} after an initial localized photoexcitation in Mg by nonadiabatic molecular dynamics simulations. Two approaches to the electronic structure of the excited electronic states are used: (i) an independent particle approximation based on a density-functional theory description of molecular orbitals and (ii) a configuration-interaction description of the many-body effects. Both methods exhibit similar relaxation times, leading to an ultrafast decay and charge transfer from Mg to C_{60} within tens of femtoseconds. Method (i) further elicits a transient trap of the transferred electron that can delay the electron-hole recombination. Results shall motivate experiments to probe these ultrafast processes by two-photon transient absorption or photoelectron spectroscopy in gas phase, in solution, or as thin films.

Reproducible Dry Stamping Transfer of PEDOT:PSS Transparent Top Electrode for Flexible Semitransparent Metal Halide Perovskite Solar Cells

A semitransparent flexible metal halide perovskite (MHP) solar cells were demonstrated by reproducible dry stamping transfer of a poly(3,4-ethylenedioxythiophene):poly(styrene sulfonic acid) (PEDOT:PSS, PH1000) transparent flexible top electrode onto poly(ethylene terephthalate) (PET)/indium tin oxide (ITO)/PEDOT:PSS (AI4083)/MHP/[6,6]-phenyl-C₆₁-butyric acid methyl ester (PCBM). The reproducible transfer of the PEDOT:PSS top electrode was enabled by the modification of PEDOT:PSS with poly(ethylene imine) (PEI)/2-methoxyethanol (2-MEA) solution. In addition, the PEI/2-MEA modification to PEDOT:PSS resulted in improved conductivity and reduced work function of the top electrode. Therefore, we could fabricate highly efficient flexible semitransparent MHP solar cells with >13% (active area = 1 cm²) power conversion efficiency.

Tunable Photoresponse by Gate Modulation in Bilayer Graphene Nanoribbon Devices

Control of absorption and photocurrent conversion is of practical importance for the design of photoelectric devices. In this paper, using simulations, we demonstrate that the photoresponse of a bilayer graphene nanoribbon (GNR) device can be controlled by gate voltage modulation. A vertical gate field shifts the potential on the top and bottom layers in opposite directions, resulting in a continuous change of band gap with applied gate voltage. This field simultaneously facilitates separation of photoexcited electron-hole pairs and gives rise to a photocurrent in a selected photon energy range. The photoresponse of a bilayer GNR device can thus be tuned by adjusting the applied gate voltage. In addition, the light frequency range can be changed by using nanoribbons of different widths. These findings provide a basis for the design of adjustable optoelectronic devices using two-dimensional materials.