Circularly Polarized Luminescence from Achiral Single Crystals of Hybrid Manganese Halides

Unveiling the Racemization in Ferroelectrics with Coupled Ferroelectricity and Optical Activity

The most distinctive features of ferroelectrics are spontaneous polarization and depolarization. Ferroelectricity was first observed in Rochelle salt, a compound with a chiral component in which the molecular chirality is not affected by depolarization. For structurally chiral ferroelectrics (SCFs), such as triglycine sulfate, which lacks chiral components, the depolarization effect on chirality presents an intriguing and unexplored topic. In this study, we focus on a newly proposed chiral optical topic in optically active ferroelectrics with coupled ferroelectricity and optical activity. We examined the depolarization effect on the optical activity in these ferroelectric materials and employed chiral-environment crystallization and solid-state circular dichroism (CD) techniques to elucidate the racemization-depolarization mechanism in an SCF for the first time. For polar and nonchiral optically active ferroelectrics, optical activity is averaged out in the powder state, resulting in no CD signal. Additionally, we experimentally validated the consistency between CD measurements and optical activity theory across the four optically active point groups (m, mm2, 4̅, 4̅2m). These findings could advance the development of chiral spintronic devices by leveraging coupled ferroelectricity and optical activity to tune the spin selectivity.

Phosphorescent Liquid Crystalline Polymer-based Circularly Polarized Luminescence Optical Waveguides for Enhanced Photonic Signal Processing and Information Encryption

Efficient circularly polarized luminescence (CPL) optical waveguides have significant potential for advancing photonic and optoelectronic devices. However, the development of CPL optical waveguides materials (OWMs) with low optical loss coefficient remains a considerable challenge. To overcome this, we design and synthesize CPL OWMs based on room-temperature phosphorescent liquid crystalline polymers (LCPs). Experimental results demonstrate that these LCPs exhibit a nematic liquid crystal phase and a phosphorescence lifetime of approximately 0.145 ms. By introducing a chiral dopant, we induce a chiral arrangement in the LCPs, followed by crosslinking via photo-cycloaddition and removal of the chiral dopants through solvent soaking. The resulting polymers exhibit stable solvent resistance and highly efficient circularly polarized phosphorescence (CPP) properties, with dissymmetric factors (gRTP) in the range of 0.16 to 0.17. Notably, the CPP-active OWMs exhibit efficient circularly polarized photonic signal waveguiding, with an optical loss coefficient of approximately 0.175 dB/mm. Ultimately, these CPP-active OWMs are sucessfully applied in information encryption, decryption, and optical switching, paving the way for advanced photonic and optoelectronic devices.

Supramolecular Assembly Enhanced Linear and Nonlinear Chiroptical Properties of Chiral Manganese Halides

Chiral hybrid organic-inorganic metal halides (HOMHs) hold great promise in broad applications ranging from ferroelectrics, spintronics to nonlinear optics, owing to their broken inversion symmetry and tunable chiroptoelectronic properties. Typically, chiral HOMHs are constructed by chiral organic cations and metal anion polyhedra, with the latter regarded as optoelectronic active units. However, the primary design approaches are largely constrained to regulation of general components within structural formula. Herein, supramolecular approaches have been taken for the functionalization of chiral enantiomers by anchoring chiral cations with crown ether hosting molecules. Chiral HOMHs of R-/S-(18-crown-6@ClMBA)2MnBr4 have been thus obtained with boosted linear and nonlinear chiroptical properties. The self-assembled cations lead to enhanced structural rigidity, which promote near-unity green light emission and strong circularly polarized luminescence with a high asymmetry factor, along with high efficiency second-order nonlinear optical responses. In particular, these chiral HOMH single crystals demonstrate a sensitive discrimination for circularly polarized laser in the near-infrared region with the nonlinear optical asymmetry factor (gSHG-CD) as high as 1.8. This work highlights the contribution of supramolecular assembly in improving chiroptical performances, offering valuable insights for the design of new chiral HOMH materials with promising application potentials as linear and nonlinear CPL emitters and detectors.

Organic Manganese Halides with Near-Unity Quantum Efficiency for High-Resolution and Flexible X-Ray Detection and Imaging

In this paper, two new organic manganese halides (pe-ted)2MnX4 (pe-ted+ = ethylphenyltriethylenediamine cation, X = Cl, Br) are synthesized, exhibiting green luminescence with near-unity photoluminescence quantum efficiency. (pe-ted)2MnBr4 shows good linear response to X-ray dose rate, with a high light yield of ≈62 000 photons MeV-1 and low detection limit of 1.376 µGy s-1. Flexible scintillator film is prepared by blending with polydimethylsiloxane for high-resolution imaging, with a low detection limit (5.173 µGy s-1), an excellent X-ray imaging spatial resolution (18.0 lp mm-1) and an impressive X-ray irradiation switching stability (3.6 mGy s-1). WLED of high color rendering index has also been fabricated. These findings represent an example of shapeable X-ray scintillators, providing new possibilities for curved and 3D X-ray imaging.

Oriented Growth of Highly Emissive Manganese Halide Microrods for Dual-Mode Low-Loss Optical Waveguides

Zero-dimensional (0D) structured lead-free metal halides have recently attracted widespread attention due to their high photoluminescence quantum yield (PLQY) and negligible self-absorption, showing enormous potential as optical waveguides towards miniaturized photonic devices. However, due to the great difficulty in growth of rod-like nano/micro-sized morphologies, such applications have been less explored. Herein, a new-type emissive organic-inorganic manganese (II) halide crystal (TPS2MnCl4, TPS=C18H15S, triphenylsulfonium) in the form of microrods is synthesized via a facile chloride ion (Cl-) induced oriented growth method. Due to a combination of attractive features such as a high PLQY of 86 %, negligible self-absorption and smooth crystal surface, TPS2MnCl4 microrods are well suited for use in optical waveguide with an ultra-low optical loss coefficient of 1.20 ⋅ 10-4 dB μm-1, superior to that of most organic-inorganic metal halide hybrids, organic materials, polymers and metal nanoclusters to the best of our knowledge. Importantly, TPS2MnCl4 microrods can further work as dual-mode optical waveguides, combining active and passive light transmission functionalities in one single crystal. In addition, TPS2MnCl4 microrods also display remarkable performance in lighting and anti-counterfeiting due to their distinct optical properties and commendable stability.

Highly Efficient Manganese Bromides with Reversible Luminescence Switching through Amorphous-Crystalline Transition

While luminescent stimuli-responsive materials (LSRMs) have become one of the most sought-after materials owing to their potential in optoelectronic applications, the use of earth-scarce lanthanides remains a crucial problem to be solved for further development. In this work, two manganese-based LSRMs, (R)-(+)-1-phenylethylammonium manganese bromide, (R-PEA)2MnBr4, and (S)-(-)-1-phenylethylammonium manganese bromide, (S-PEA)2MnBr4, are successfully demonstrated. Both (R-PEA)2MnBr4 and (S-PEA)2MnBr4 show a kinetically stable red-emissive amorphous state and a thermodynamically stable green-emissive crystalline state at room temperature, where the fully reversible transition can be done through melt-quenching and annealing processes. Based on this property, a reusable manganese-halide-based time-temperature indicator is demonstrated for the first time. Furthermore, an X-ray scintillator with a low limit of detection (18.1 nGy/s) and a high spatial resolution limit (30.0 lp/mm) are achieved by exploiting the high transparency of amorphous states. These results uncover the multifunctionality of manganese halides and pave the way for upcoming research.

Highly efficient circularly polarized electroluminescence based on chiral manganese(ii) complexes

Currently reported circularly polarized luminescent devices are primarily based on rare earth and noble metal complexes or lead perovskite materials. Reports on electroluminescent devices employing eco-friendly luminescent materials are notably scarce. In this study, we strategically designed and synthesized manganese complexes featuring Binapo as the chiral ligand. The complex structure reveals a tetrahedral coordination configuration, with the R/S configurations exhibiting a mirror relationship. Leveraging the strong ligand field and chiral structural characteristics of Binapo, the enantiomers display red emission and exhibit significant circularly polarized luminescence with a circularly polarized luminescence asymmetric factor (g lum) of 5.1 × 10-3. The circularly polarized electroluminescent performance was investigated by using a solution processing method and host-guest doping strategy. Our efforts resulted in device performance with an external quantum efficiency (EQE) exceeding 4%, and its electroluminescent asymmetric factor (g EL) reached an impressive -8.5 × 10-3. This surpasses the performance of most devices relying on platinum (Pt) and iridium (Ir) metal complexes and perovskite related materials. Our work establishes a pathway for the development of cost-effective and environmentally friendly chiral electroluminescent materials and devices.

Unlocking the Potential of Organic-Inorganic Hybrid Manganese Halides for Advanced Optoelectronic Applications

Organic-inorganic hybrid manganese(II) halides (OIMnHs) have garnered tremendous interest across a wide array of research fields owing to their outstanding optical properties, abundant structural diversity, low-cost solution processibility, and low toxicity, which make them extremely suitable for use as a new class of luminescent materials for various optoelectronic applications. Over the past years, a plethora of OIMnHs with different structural dimensionalities and multifunctionalities such as efficient photoluminescence (PL), radioluminescence, circularly polarized luminescence, and mechanoluminescence have been newly created by judicious screening of the organic cations and inorganic Mn(II) polyhedra. Specifically, through precise molecular and structural engineering, a series of OIMnHs with near-unity PL quantum yields, high anti-thermal quenching properties, and excellent stability in harsh conditions have been devised and explored for applications in light-emitting diodes (LEDs), X-ray scintillators, multimodal anti-counterfeiting, and fluorescent sensing. In this review, the latest advancements in the development of OIMnHs as efficient light-emitting materials are summarized, which covers from their fundamental physicochemical properties to advanced optoelectronic applications, with an emphasis on the structural and functionality design especially for LEDs and X-ray detection and imaging. Current challenges and future efforts to unlock the potentials of these promising materials are also envisioned.

Evaluation of Point Group Symmetry in Lanthanide(III) Complexes: A New Implementation of a Continuous Symmetry Operation Measure with Autonomous Assignment of the Principal Axis

The structure of molecular systems dictates the physical properties, and symmetry is the determining factor for all electronic properties. This makes group theory a powerful tool in quantum mechanics to compute molecular properties. For inorganic compounds, the coordination geometry has been estimated as idealized polyhedra with high symmetry, which, through ligand field theory, provides predictive capabilities. However, real samples rarely have ideal symmetry, and although continuous shape measures (CShM) can be used to evaluate deviation from an ideal reference structure σideal, this often fails for lanthanide(III) complexes with high coordination numbers, no obvious choice of principal axes, and no obvious reference structure. In lanthanide complexes, the unique electronic structures and associated properties are intricately tied to the symmetry around the lanthanide center. Therefore, robust methodologies to evaluate and estimate point group symmetry are instrumental for building structure-property relationships. Here, we have demonstrated an algorithmic approach that orients a molecular structure Q in the best possible way to the symmetry axis of any given point group G and computes a deviation from the ideal symmetry σsym(G,Q). This approach does not compute the deviation from an ideal reference system, but the intrinsic deviation in the structure induced by symmetry operations. If the structure contains the symmetry operation, there is no deviation and σsym(G,Q) = 0. The σsym deviation is generated from all of the symmetry operation ÔS in a point group G using the most correct orientation of the sample structure in each group G. The best orientation is found by an algorithm that minimizes the orientation of the structure with respect to G. To demonstrate the methodology, we have investigated the structure and symmetry of 8- and 9-coordinated lanthanide(III) aqua complexes and correlated the luminescence from 3 europium(III) crystals to their actual symmetry. To document the methodology, the approach has been tested on 26 molecules with different symmetries. It was concluded that the method is robust and fully autonomous.

Recent strategies for triplet-state emission regulation toward non-lead organic-inorganic metal halides

Organic-inorganic metal halides (OIMHs) have strengthened the development of triplet-state emission materials due to their excellent luminescence performance. Due to the inherent toxicity of lead (Pb) significantly limiting its further advancement, numerous studies have been conducted to regulate triplet-state emission of non-Pb OIMHs, and several feasible strategies have been proposed. However, most of the non-Pb OIMHs reported have a relatively short lifetime or a low luminescence efficiency, not in favor of their application. In this review, we provide a summary of recent reports on the regulation of triplet-state emissions in non-Pb OIMHs to provide benefits for the design of innovative luminescent materials. Our focus is primarily on exploring the internal and external factors that influence the triplet-state emission. Starting from the luminescence mechanism, the current strategies for regulating triplet-state emissions are summarized. Moreover, by manipulating these strategies, it becomes feasible to achieve triplet-state emissions that span a range of colors from blue to red, and even extend into the near-infrared spectrum with high luminescence efficiency, while also increasing their lifetimes. This review not only provides fresh insights into the advancement of triplet-state emissions in OIMHs but also integrates experimental and theoretical perspectives to illuminate the trajectory of future research endeavors.

Ultrafast Visual Detection of a Trace Amount of Water by Highly Efficient Hybrid Manganese Halides

A quantitative water detection method is urgently needed in storage facilities, space exploration, and the chemical industry. Although numerous physical techniques have been widely utilized to determine the water content, they still suffer from many disadvantages such as highly expensive special instruments, complicated analysis processes, etc. Hence, a convenient, rapid, and sensitive water analysis method is highly desirable. Herein, we developed a visual fluorescence sensing technology for water detection based on reversible PL off-on switching of organic-inorganic hybrid zero-dimensional (0D) manganese halides. In this work, a family of hybrid manganese halides were synthesized through a facile solution method, namely, [NH4(18-Crown-6)]2MnBr4, [Ca(18-Crown-6)·3H2O](18-Crown-6)MnBr4, [NH4(dibenzo-18-Crown-6)]2MnBr4, and [Ca(dibenzo-18-Crown-6)·2H2O]MnBr4. Excited by UV light, these highly crystalline manganese halides exhibit strong green light emissions from the d-d electron transition of Mn2+ with near-unity photoluminescence quantum yield and submillisecond lifetime. Benefiting from the dynamic and weak ionic bonding interactions, these 0D manganese halides display reversible water-response on/off luminescence switching but fail in any other aprotic solvents. Therefore, these 0D hybrid manganese halides can be explored as ultrafast visual fluorescence probes to detect the trace amount of water in organic solvents with multiple superiorities of rapid response time (< 2 s), ultralow detection limit (9.71 ppm), excellent repeatability, etc. The reversible water-response luminescent on/off switching also provides a binary optical gate with advanced applications in anticounterfeiting and information security, etc.

Homochiral Tetraphenylethene-Based Metal-Organic Frameworks with Circularly Polarized Luminescence for Enantioselective Recognition

A pair of water-stable and highly porous homochiral fluorescent silver-organic framework enantiomers, namely, R-Ag-BPA-TPyPE (R-1) and S-Ag-BPA-TPyPE (S-1), had been prepared as enantioselective fluorescence sensors. Combining homochiral 1,1'-binaphthyl-2,2'-diyl hydrogen phosphate (BPA) with an AIE-based ligand tetrakis[4-(pyridin-4-yl)phenyl]ethene (TPyPE) in complexes R-1 and S-1 made them possess favorable circularly polarized luminescence (CPL) properties, and their CPL spectra were almost mirror images of each other. The luminescence dissymmetry factors (glum) are ±2.2 × 10-3 for R-1 and S-1, and the absolute fluorescence quantum yields (ΦFs) are 32.0% for R-1 and S-1, respectively. Complex R-1 could enantioselectively recognize two enantiomers of amino acids in water or DMF with high Stern-Volmer constants of 236-573 M-1 and enantioselectivity ratios of 1.40-1.78.

Achieving Strong Circularly Polarized Luminescence through Cascade Cationic Insertion in Lead-free Hybrid Metal Halides

Generating circularly polarized luminescence (CPL) with simultaneous high photoluminescence quantum yield (PLQY) and dissymmetry factor (glum) is difficult due to usually unmatched electric transition dipole moment (μ) and magnetic transition dipole moment (m) of materials. Herein we tackle this issue by playing a "cascade cationic insertion" trick to achieve strong CPL (with PLQY of ~100 %) in lead-free metal halides with high glum values reaching -2.3×10-2 without using any chiral inducers. Achiral solvents of hydrochloric acid (HCl) and N, N-dimethylformamide (DMF) infiltrate the crystal lattice via asymmetric hydrogen bonding, distorting the perovskite structure to induce the "intrinsic" chirality. Surprisingly, additional insertion of Cs+ cation to substitute partial (CH3)2NH2 + transforms the chiral space group to achiral but the crystal maintains chiroptical activity. Further doping of Sb3+ stimulates strong photoluminescence as a result of self-trapped excitons (STEs) formation without disturbing the crystal framework. The chiral perovskites of indium-antimony chlorides embedded on LEDs chips demonstrate promising potential as CPL emitters. Our work presents rare cases of chiroptical activity of highly luminescent perovskites from only achiral building blocks via spontaneous resolution as a result of symmetry breaking.

Ligand Chirality Transfer from Solution State to the Crystalline Self-Assemblies in Circularly Polarized Luminescence (CPL) Active Lanthanide Systems

The synthesis of a family of chiral and enantiomerically pure pyridyl-diamide (pda) ligands that upon complexation with europium [Eu(CF3SO3)3] result in chiral complexes with metal centered luminescence is reported; the sets of enantiomers giving rise to both circular dichroism (CD) and circularly polarized luminescence (CPL) signatures. The solid-state structures of these chiral metallosupramolecular systems are determined using X-ray diffraction showing that the ligand chirality is transferred from solution to the solid state. This optically favorable helical packing arrangement is confirmed by recording the CPL spectra from the crystalline assembly by using steady state and enantioselective differential chiral contrast (EDCC) CPL Laser Scanning Confocal Microscopy (CPL-LSCM) where the two enantiomers can be clearly distinguished.

Circularly polarized luminescence in quantum dot-based materials

Quantum dots (QDs) have emerged as fantastic luminescent nanomaterials with significant potential due to their unique photoluminescence properties. With the rapid development of circularly polarized luminescence (CPL) materials, many researchers have associated QDs with the CPL property, resulting in numerous novel CPL-active QD-containing materials in recent years. The present work reviews the latest advances in CPL-active QD-based materials, which are classified based on the types of QDs, including perovskite QDs, carbon dots, and colloidal semiconductor QDs. The applications of CPL-active QD-based materials in biological, optoelectronic, and anti-counterfeiting fields are also discussed. Additionally, the current challenges and future perspectives in this field are summarized. This review article is expected to stimulate more unprecedented achievements based on CPL-active QD-based materials, thus further promoting their future practical applications.

Bright Circularly Polarized Mechanoluminescence from 0D Hybrid Manganese Halides

Hybrid metal halides (HMHs) with efficient circularly polarized luminescence (CPL) have application prospects in many fields, due to their abundant host-guest structures and high photoluminescence quantum yield (PLQY). However, CPLs in HMHs are predominantly excited by light or electricity, limiting their use in multivariate environments. It is necessary to explore a novel excitation method to extend the application of chiral HMHs as smart stimuli-responsive optical materials. In this work, an enantiomeric pair of 0D hybrid manganese bromides, [H2(2R,4R)-(+)/(2S,4S)-(-)-2,4-bis(diphenylphosphino)pentane]MnBr4 [(R/S)-1] is presented, which exhibits efficient CPL emissions with near-unity PLQYs and high dissymmetry factors of ± 2.0 × 10-3. Notably, (R/S)-1 compounds exhibit unprecedented and bright circularly polarized mechanoluminescence (CPML) emissions under mechanical stimulation. Moreover, (R/S)-1 possess high mechanical force sensitivities with mechanoluminescence (ML) emissions detectable under 0.1 N force stimulation. Furthermore, this ML emission exhibits an extraordinary antithermal quenching effect in the temperature range of 300-380 K, which is revealed to originate from a thermal activation energy compensation mechanism from trap levels to Mn(II) 4T1 level. Based on their intriguing optical properties, these compounds as chiral force-responsive materials are demonstrated in multilevel confidential information encryption.

Multi-stimuli-responsive luminescence enabled by crown ether anchored chiral antimony halide phosphors

Stimuli-responsive optical materials have provided a powerful impetus for the development of intelligent optoelectronic devices. The family of organic-inorganic hybrid metal halides, distinguished by their structural diversity, presents a prospective platform for the advancement of stimuli-responsive optical materials. Here, we have employed a crown ether to anchor the A-site cation of a chiral antimony halide, enabling convenient control and modulation of its photophysical properties. The chirality-dependent asymmetric lattice distortion of inorganic skeletons assisted by a crown ether promotes the formation of self-trapped excitons (STEs), leading to a high photoluminescence quantum yield of over 85%, concomitant with the effective circularly polarized luminescence. The antimony halide enantiomers showcase highly sensitive stimuli-responsive luminescent behaviours towards excitation wavelength and temperature simultaneously, exhibiting a versatile reversible colour switching capability from blue to white and further to orange. In situ temperature-dependent luminescence spectra, time-resolved luminescence spectra and theoretical calculations reveal that the multi-stimuli-responsive luminescent behaviours stem from distinct STEs within zero-dimensional lattices. By virtue of the inherent flexibility and adaptability, these chiral antimony chlorides have promising prospects for future applications in cutting-edge fields such as multifunctional illumination technologies and intelligent sensing devices.

Supramolecular crystals of Mn(15-crown-5)(MnCl4)(DMF) with dielectric phase transition, high quantum yield and phase transition-induced luminescence enhancement behavior

The supramolecular crystals, Mn(15-crown-5)(MnCl4)(DMF), (1; 15-crown-5 = 1,4,7,10,13-pentaoxacyclopentadecane), were synthesized via a self-assembly strategy under ambient conditions. Comprehensive characterization of the crystals involved microanalysis for C, H, and N elements, thermogravimetric (TG) analysis, differential scanning calorimetry (DSC) and single-crystal X-ray diffraction techniques. The results reveal that 1 undergoes a two-step thermotropic and isostructural phase transition at around 217 K and 351 K upon heating. All three phases belong to the same space group (P212121) with analogous cell parameters. These two phase transitions primarily involve the thermally activated ring rotational dynamics of the 15-crown-5 molecule, with only the transition at ca. 351 K being associated with a dielectric anomaly. 1 exhibits intense luminescence with a peak at ∼600 nm and a high quantum yield of 68%. The mechanisms underlying this intense luminescence are likely linked to low-symmetry ligand fields. Additionally, 1 displays phase transition-induced luminescence enhancement behavior, and the possible mechanism is further discussed.

Luminescence-Based Infrared Thermal Sensors: Comprehensive Insights

Recent chronological breakthroughs in materials innovation, their fabrication, and structural designs for disparate applications have paved transformational ways to subversively digitalize infrared (IR) thermal imaging sensors from traditional to smart. The noninvasive IR thermal imaging sensors are at the cutting edge of developments, exploiting the abilities of nanomaterials to acquire arbitrary, targeted, and tunable responses suitable for integration with host materials and devices, intimately disintegrate variegated signals from the target onto depiction without any discomfort, eliminating motional artifacts and collects precise physiological and physiochemical information in natural contexts. Highlighting several typical examples from recent literature, this review article summarizes an accessible, critical, and authoritative summary of an emerging class of advancement in the modalities of nano and micro-scale materials and devices, their fabrication designs and applications in infrared thermal sensors. Introduction is begun covering the importance of IR sensors, followed by a survey on sensing capabilities of various nano and micro structural materials, their design architects, and then culminating an overview of their diverse application swaths. The review concludes with a stimulating frontier debate on the opportunities, difficulties, and future approaches in the vibrant sector of infrared thermal imaging sensors.

A supramolecular assembly-based strategy towards the generation and amplification of photon up-conversion and circularly polarized luminescence

For the molecular properties in which energy transfer/migration is determinantal, such as triplet-triplet annihilation-based photon up-conversion (TTAUC), the overall performance is largely affected by the intermolecular distance and relative molecular orientations. In such scenarios, tools that may steer the intermolecular interactions and provide control over molecular organisation in the bulk, become most valuable. Often these non-covalent interactions, found predominantly in supramolecular assemblies, enable pre-programming of the molecular network in the assembled structures. In other words, by employing supramolecular chemistry principles, an arrangement where molecular units are arranged in a desired fashion, very much like a Lego toy, could be achieved. This leads to enhanced energy transfer from one molecule to other. In recent past, chiral luminescent systems have attracted huge attention for producing circularly polarized luminescence (CPL). In such systems, chirality is a necessary requirement. Chirality induction/transfer through supramolecular interactions has been known for a long time. It was realized recently that it may help in the generation and amplification of CPL signals as well. In this review article we have discussed the applicability of self-/co-assembly processes for achieving maximum TTA-UC and CPL in various molecular systems.

Antimony-Triggered Tunable White Light Emission in Lead-Free Zero-Dimensional Indium Halide with Ultrastable CCT of White Light Emitting Diodes

A highly efficient and easily tunable luminescence is significant for solid-state luminescent (SSL) materials. However, achieving a photoluminescence quantum yield (PLQY) close to unity and tuning the emission remain challenging tasks. Metal doping strategies enable resolution of these issues. Herein, we report the preparation of a novel organic-inorganic lead-free indium-based metal halide hybrid (MP)3InCl6•EtOH (MP = C4H10ON) with a typical zero-dimension structure. When excited at 320 nm, (MP)3InCl6•EtOH exhibits a dual emission band at 420 and 600 nm, which originates from the organic cation [MP] and the [InCl6]3- octahedral unit. The photoluminescence can be significantly enhanced through Sb3+ doping, resulting in an increase in PLQY from 0.78% to near unity. Multiple emission color tunings have been achieved by regulating the Sb doping level and the radiation wavelength, resulting in a change in emission color from blue → white → orange. Optical characterizations reveal that the significantly enhanced emission centered at 600 nm can be attributed to more efficient absorption, closely associated with an additional 1S0 → 3P1 transition in the inorganic octahedron [In(Sb)Cl6]3- due to Sb3+ doping. With its excellent optical performance, a white light emitting diode (WLED) has been successfully fabricated by coating the mixture of (MP)3InCl6•EtOH:15%Sb3+ with blue phosphor BaMgAl10O17:Eu2+ onto a UV LED chip. The WLED device exhibits perfect white light emission with regard to the International Commission on Illumination (CIE) coordinates of (0.36, 0.34). Significantly, the WLED device maintains a stable correlated color temperature (CCT) range of 4119-4393 K and CIE coordinates (x: 0.37-0.34, y: 0.35-0.33) as the driven current varies from 20 to 200 mA, demonstrating outstanding stability across different power levels. This work not only presents a novel system for achieving remarkably enhanced luminescent performance and tuning emission bands in 0D metal halides but also represents a significant step toward achieving resistance to color drifting for stable WLEDs.

Exciton Chirality Transfer Empowers Self-Triggered Spin-Polarized Amplified Spontaneous Emission from 1D-Anchoring-3D Perovskites

Spin-polarized lasers, arising from stimulated emission of imbalanced spin populations, play a vital role in spin-optoelectronics. It is usually tackled by external spin injection, inevitably suffering from additional losses across the barriers from injection sources to gain materials. Herein, spin-polarized coherent light emission is self-triggered from the 1D-anchoring-3D perovskites, where the imbalanced populations in achiral 3D perovskites are endowed with the spin selectivity of exciton chirality (EC) underpinned by chiral 1D perovskites. Efficient transfer of EC is enabled by rapid energy transfer, thereby creating an imbalance of the spin population of excited states. Stimulated emission of such populations brings self-triggered spin-polarized amplified spontaneous emission in the composite perovskites, yielding a higher degree of polarization (DOP) than that based on optical spin injection into bare achiral 3D perovskites. Chemical diversity of composite perovskites not only enables to adjust band gap for broadband output of spin-polarized light signals but also promises to manipulate radiative decay and spin relaxation toward remarkably increased DOP. These results highlight the importance of EC transfer mechanism for spin-polarized lasing and represent a crucial step toward the development of chiral-spintronics.

Pseudo-2D Layered Organic-Inorganic Manganese Bromide with a Near-Unity Photoluminescence Quantum Yield for White Light-Emitting Diode and X-Ray Scintillator

Eco-friendly lead-free organic-inorganic manganese halides (OIMHs) have attracted considerable attention in various optoelectronic applications because of their superior optical properties and flexible solution processibility. Herein, we report a novel pseudo-2D layered OIMH (MTP)2 MnBr4 (MTP: methyltriphenylphosphonium), which exhibits intense green emission under UV/blue or X-ray excitation, with a near-unity photoluminescence quantum yield, high resistance to thermal quenching (I150 °C =84.1 %) and good photochemical stability. These features enable (MTP)2 MnBr4 as an efficient green phosphor for blue-converted white light-emitting diodes, demonstrating a commercial-level luminous efficiency of 101 lm W-1 and a wide color gamut of 116 % NTSC. Moreover, these (MTP)2 MnBr4 crystals showcase outstanding X-ray scintillation properties, delivering a light yield of 67000 photon MeV-1 , a detection limit of 82.4 nGy s-1 , and a competitive spatial resolution of 6.2 lp mm-1 for X-ray imaging. This work presents a new avenue for the exploration of eco-friendly luminescent OIMHs towards multifunctional light-emitting applications.

Enhanced Circular Dichroism and Polarized Emission in an Achiral, Low Band Gap Bismuth Iodide Perovskite Derivative

Lead halide perovskites and related main-group halogenido metalates offer unique semiconductor properties and diverse applications in photovoltaics, solid-state lighting, and photocatalysis. Recent advances in incorporating chiral organic cations have led to the emergence of chiral metal-halide semiconductors with intriguing properties, such as chiroptical activity and chirality-induced spin selectivity, enabling the generation and detection of circularly polarized light and spin-polarized electrons for applications in spintronics and quantum information. However, understanding the structural origin of chiroptical activity remains challenging due to macroscopic factors and experimental limitations. In this work, we present an achiral perovskite derivative [Cu2(pyz)3(MeCN)2][Bi3I11] (CuBiI; pyz = pyrazine; MeCN = acetonitrile), which exhibits remarkable circular dichroism (CD) attributed to the material's noncentrosymmetric nature. CuBiI features a unique structure as a poly-threaded iodido bismuthate, with [Bi3I11]2- chains threaded through a cationic two-dimensional coordination polymer. The material possesses a low, direct optical band gap of 1.70 eV. Notably, single crystals display both linear and circular optical activity with a large anisotropy factor of up to 0.16. Surprisingly, despite the absence of chiral building blocks, CuBiI exhibits a significant degree of circularly polarized photoluminescence, reaching 4.9%. This value is comparable to the results achieved by incorporating chiral organic molecules into perovskites, typically ranging from 3-10% at zero magnetic field. Our findings provide insights into the macroscopic origin of CD and offer design guidelines for the development of materials with high chiroptical activity.

Flexible Crystal Heterojunctions of Low-Dimensional Organic Metal Halides Enabling Color-Tunable Space-Resolved Optical Waveguides

Molecular luminescent materials with optical waveguide have wide application prospects in light-emitting diodes, sensors, and logic gates. However, the majority of traditional optical waveguide systems are based on brittle molecular crystals, which limited the fabrication, transportation, storage, and adaptation of flexible devices under diverse application situations. To date, the design and synthesis of photofunctional materials with high flexibility, novel optical waveguide, and multi-port color-tunable emission in the same solid-state system remain an open challenge. Here, we have constructed new types of zero-dimensional organic metal halides (Au-4-dimethylaminopyridine [DMAP] and In-DMAP) with a rarely high elasticity and rather low loss coefficients for optical waveguide. Theoretical calculations on the intermolecular interactions showed that the high elasticity of 2 molecular crystalline materials was original from their herringbone structure and slip plane. Based on one-dimensional flexible microrods of 2 crystals and the 2-dimensional microplate of the Mn-DMAP, heterojunctions with multi-color and space-resolved optical waveguides have been fabricated. The formation mechanism of heterojunctions is based on the surface selective growth on account of the low lattice mismatch ratio between contacting crystal planes. Therefore, this work describes the first attempt to the design of metal-halide-based crystal heterojunctions with high flexibility and optical waveguide, expanding the prospects of traditional luminescent materials for smart optical devices, such as logic gates and multiplexers.

Achiral Au(I) Cyclic Trinuclear Complexes with High-Efficiency Circularly Polarized Near-Infrared TADF

Realizing high photoluminescence quantum yield (PLQY) in the near-infrared (NIR) region is challenging and valuable for luminescent material, especially for thermally activated delay fluorescence (TADF) material. In this work, we report two achiral cyclic trinuclear Au(I) complexes, Au3 (4-Clpyrazolate)3 and Au3 (4-Brpyrazolate)3 (denoted as Cl-Au and Br-Au), obtained through the reaction of 4-chloro-1H-pyrazole and 4-bromo-1H-pyrazole with Au(I) salts, respectively. Both Cl-Au and Br-Au exhibit TADF with high PLQY (>70 %) in the NIR I (700-900 nm) (λmax = 720 nm) region, exceeding other NIR-TADF emitters in the solid state. Photophysical experiments and theoretical calculations confirmed the efficient NIR-TADF properties of Cl-Au and Br-Au were attributed to the small energy gap ΔE(S1-T2) (S = singlet, T = triplet) and the large spin-orbital coupling induced by ligand-to-metal-metal charge transfer of molecular aggregations. In addition, both complexes crystallize in the achiral Pna21 space group (mm2 point group) and are circularly polarized light (CPL) active with maxima luminescent dissymmetry factor |glum | of 3.4 × 10-3 (Cl-Au) and 2.7 × 10-3 (Br-Au) for their crystalline powder samples, respectively. By using Cl-Au as the emitting ink, 3D-printed luminescent logos are fabricated, which own anti-counterfeiting functions due to its CPL behavior dependent on the crystallinity.

Integrating Achiral and Chiral Organic Ligands in Zero-Dimensional Hybrid Metal Halides to Boost Circularly Polarized Luminescence

Chiral zero-dimensional hybrid metal halides (0D HMHs) could combine excellent optical properties and chirality, making them promising for circularly polarized luminescence (CPL). However, chiral 0D HMHs with efficient CPL have been rarely reported. Here, we propose an efficient strategy to achieve simultaneously high photoluminescence quantum yield (PLQY) and large dissymmetry factor (glum ), by integrating achiral and chiral ligands into 0D HMHs. Specifically, three pairs of chiral 0D hybrid indium-antimony chlorides are synthesized by combing achiral guanidine with three types of chiral methylbenzylammonium-based derivatives as the organic cations. These chiral 0D HMHs exhibit near-unity PLQY and large glum values up to around ±1×10-2 . The achiral guanidine ligand is not only essential to crystallize these hybrid indium-antimony chlorides to achieve near-unity PLQYs, but also greatly enhances the chirality induction from organic ligands to inorganic units in these 0D HMHs. Furthermore, the choice of different chiral ligands can modify the strength of hydrogen bonding interactions in these 0D HMHs, to maximize their glum values. Overall, this study provides a robust way to realize efficient CPL in chiral HMHs, expanding their applications in chiroptical fields.

Strong Magnetically-Responsive Circularly Polarized Phosphorescence and X-Ray Scintillation in Ultrarobust Mn(II)-Organic Helical Chains

Over recent years, Mn(II)-organic materials showing circularly polarized luminescence (CPL) have attracted great interest because of their eco-friendliness, cheapness, and room temperature phosphorescence. Using the helicity design strategy, herein, chiral Mn(II)-organic helical polymers are constructed featuring long-lived circularly polarized phosphorescence with exceptionally high glum and ΦPL magnitudes of 0.021% and 89%, respectively, while remaining ultrarobust toward humidity, temperature, and X-rays. Equally important, it is disclosed for the first time that the magnetic field has a remarkably high negative effect on CPL for Mn(II) materials, suppressing the CPL signal by 4.2-times atB ⃗ $\vec{B}$  = 1.6 T. Using the designed materials, UV-pumped CPL light-emitting diodes are fabricated, demonstrating enhanced optical selectivity under right- and left-handed polarization conditions. On top of all this, the reported materials display bright triboluminescence and excellent X-ray scintillation activity with a perfectly linear X-ray dose rate response up to 174 µGyair  s-1 . Overall, these observations significantly contribute to the CPL phenomenon for multi-spin compounds and promote the design of highly efficient and stable Mn(II)-based CPL emitters.

Satellite Red Emission from a Single Green-Emissive MnBr42- Tetrahedron in Soft Hybrid Single Crystals

Photoinduced self-trapped exciton emission is common in soft matter metal halide semiconductors, whereas analogous phenomena in metal halide insulators with localized emitting centers and delayed satellite emission have rarely been identified. In this study, a new zero-dimensional Mn(II) hybrid of [3DPTPP]MnBr4 (3DPTPP = (3-(dimethylamino)propyl)(triphenyl)phosphonium) with only one crystallographic Mn2+ site but dual emission is reported. The delayed red emission (∼630 nm) is successfully assigned to a satellite of the green-emissive (∼530 nm) MnBr42- tetrahedron shifted by N-H vibration (∼2500 cm-1), directly evidenced by the Raman spectra and further supported by density functional theory calculation. The photoluminescence decay curves demonstrate their same origin, but the red emission exhibits a delayed process. The temperature- and pressure-dependent PL spectra, temperature-dependent distortion of the MnBr42- tetrahedron, and light polarization spectra confirmed the consistency and distinctness of the dual emission. This study will inspire further research on self-trapped optoelectronic processes in soft metal halides.

Ligand-protected metal nanoclusters as low-loss, highly polarized emitters for optical waveguides

Photoluminescent molecules and nanomaterials have potential applications as active waveguides, but such a use has often been limited by high optical losses and complex fabrication processes. We explored ligand-protected metal nanoclusters (LPMNCs), which can have strong, stable, and tunable emission, as waveguides. Two alloy LPMNCs, Pt1Ag18 and AuxAg19-x (7 ≤ x ≤ 9), were synthesized and structurally determined. Crystals of both exhibited excellent optical waveguide performance, with optical loss coefficients of 5.26 × 10-3 and 7.77 × 10-3 decibels per micrometer, respectively, lower than those demonstrated by most inorganic, organic, and hybrid materials. The crystal packing and molecular orientation of the Pt1Ag18 compound led to an extremely high polarization ratio of 0.91. Aggregation enhanced the quantum yields of Pt1Ag18 and AuxAg19-x LPMNCs by 115- and 1.5-fold, respectively. This photonic cluster with low loss and high polarization provides a generalizable and versatile platform for active waveguides and polarizable materials.

Chiroptical Activity of An Achiral Emissive Eu Metal-Organic Framework

Chiroptical activity of achiral crystals is theoretically allowed but very unusual. There is a particularly scarcity of empirical studies on optically active achiral metal-organic frameworks (MOFs). Herein we report an achiral emissive Eu MOF and its chiroptical properties both in the ground and excited states. The framework crystallizes in an achiral space group (Pna2₁ ) belonging to the polar point group (mm2), where the asymmetric arrangement of racemic trinuclear Eu-oxo clusters is responsible for the optical activity. A pair of circular dichroisms (CD) and circularly polarized luminescence (CPL) peaks with opposite signs were observed for single crystals. Importantly, the luminescence dissymmetry factor can reach up to 1.1×10^-3 , which is comparable in magnitude to the value of most of the chiral-linker-bridged MOFs. This work gives the first example of achiral MOFs with CPL response and should be instructive for the discovery of more CPL emitters from racemic MOF family.

Elucidating Structure-Property Correlation in Perovskitoid and Antiperovskite Piperidinium Manganese Chloride

In the world of semiconductors, organic-inorganic hybrid (OIH) halide perovskite is a new paradigm. Recently, a zealous effort has been made to design new lead-free perovskite-like OIH halides, such as perovskitoids and antiperovskites, for optoelectronic applications. In this context, we have synthesized a perovskitoid compound (Piperidinium)MnCl₃ (compound 1) crystallizing in an orthorhombic structure with infinite one-dimensional (1D) chains of MnCl₆ octahedra. Interestingly, this compound shows switchable dielectric property governed by an order-disorder structural transition. By controlling the stoichiometry of piperidine, we have synthesized an antiperovskite (Piperidinium)₃Cl[MnCl₄] (compound 2), the inverse analogue of a perovskite, consisting of zero-dimensional (0D) MnCl₄ tetrahedra. This type of organic-inorganic hybrid antiperovskite halide is unique and scarce. Such a dissimilarity in lattice dimensionality and Mn²⁺ ion coordination ensues fascinating photophysical and magnetic properties. Compound 1 exhibits red emission with a photoluminescence quantum yield (PLQY) of ∼28%. On the other hand, the 0D antiperovskite compound 2 displays green emission with a higher PLQY of 54.5%, thanks to the confinement effect. In addition, the dimensionality of the compounds plays a vital role in the exchange interaction. As a result, compound 1 shows an antiferromagnetic ground state, whereas compound 2 is paramagnetic down to 1.8 K. This emerging structure-property relationship in OIH manganese halides will set the platform for designing new perovskites and antiperovskites.

Highly Luminescent Earth-Benign Organometallic Manganese Halide Crystals with Ultrahigh Thermal Stability of Emission from 4 to 623 K

The phosphor-converted light-emitting diode (PC-LED) has become an indispensable solid-state lighting and display technologies in the modern society. Nevertheless, the use of scarce rare-earth elements and the thermal quenching (TQ) behavior are still two most crucial issues yet to be solved. Here, this work successfully demonstrates a highly efficient and thermally stable green emissive MnI₂ (XanPO) crystals showing a notable photoluminescence quantum yield (PLQY) of 94% and a super TQ resistance from 4 to 623 K. This unprecedented superior thermal stability is attributed to the low electron-phonon coupling and the unique rigid crystal structure of MnI₂ (XanPO) over the whole temperature range based on the temperature-dependent photoluminescence (PL) and single crystal X-ray diffraction (SCXRD) analyses. Considering these appealing properties, green PC-LEDs with a power efficacy of 102.5 lm W^-1 , an external quantum efficiency (EQE) of 22.7% and a peak luminance up to 7750 000 cd m^-2 are fabricated by integrating MnI₂ (XanPO) with commercial blue LEDs. Moreover, the applicability of MnI₂ (XanPO) in both micro-LEDs and organic light-emitting diodes (OLEDs) is also demonstrated. In a nutshell, this study uncovers a candidate of highly luminescent and TQ resistant manganese halide suitable for a variety of emission applications.

Circular polarized light-dependent anomalous photovoltaic effect from achiral hybrid perovskites

Circular polarized light-dependent anomalous bulk photovoltaic effect - a steady anomalous photovoltaic current can be manipulated by changing the light helicity, is an increasingly interesting topic in contexts ranging from physics to chemistry. Herein, circular polarized light-dependent anomalous bulk photovoltaic effect is presented in achiral hybrid perovskites, (4-AMP)BiI5 (ABI, 4-AMP is 4-(aminomethyl)piperidinium), breaking conventional realization that it can only happen in chiral species. Achiral hybrid perovskite ABI crystallizes in chiroptical-active asymmetric point group m (Cs), showing an anomalous bulk photovoltaic effect with giant photovoltage of 25 V, as well as strong circular polarized light - sensitive properties. Significantly, conspicuous circular polarized light-dependent anomalous bulk photovoltaic effect is reflected in the large degree of dependence of anomalous bulk photovoltaic effect on left-and right-CPL helicity, which is associated with left and right-handed screw optical axes of ABI. Such degree of dependence is demonstrated by a large asymmetry factor of 0.24, which almost falls around the highest value of hybrid perovskites. These unprecedented results may provide a perspective to develop opto-spintronic functionalities in hybrid perovskites.

Manganese(II) Bromide Compound with Diprotonated 1-Hydroxy-2-(pyridin-2-yl)-4,5,6,7-tetrahydrobenzimidazole: Dual Emission and the Effect of Proton Transfers

An organic–inorganic cation–anion manganese(II) tetrabromide compound with diprotonated 1-hydroxy-2-(pyridin-2-yl)-4,5,6,7-tetrahydrobenzimidazole, [H3L][MnBr4][H2O], has been synthesized and investigated. The compound has a few possible pathways for proton transfers, which play an important role in the observed luminescence, optical, and magnetic properties. The proton transfers result in the appearance of two-band luminescence. One band is caused by the Mn(II) d-d transitions. The other band is caused by the transition from the triplet state of organic cation and the d-d transition of manganese(II) coupled through {[H3L]}-{[MnBr4]}-{[H2O]} vibrations. The optical absorption spectra of [H3L][MnBr4][H2O] indicate the presence of two direct and one indirect band transitions. The reason for the two-band luminescence and complex optical absorption in [H3L][MnBr4][H2O] were additionally considered using the DFT calculations.

Molecular Cocrystals with Hydrogen-Bonded Polymeric Structures and Polarized Luminescence

Crystalline materials with appealing luminescent properties are attractive materials for various optoelectronic applications. The in situ bicomponent reaction of 1,2-ethylenedisulfonic acid with 1,4-di(pyrid-2-yl)benzene, 1,4-di(pyrid-3-yl)benzene, or 1,4-di(pyrid-4-yl)benzene affords luminescent crystals with hydrogen-bonded polymeric structures. Variations in the positions of the pyridine nitrogen atoms lead to alternating polymeric structures with either a ladder- or zigzag-type of molecular arrangement. By using a nanoprecipitation method, microcrystals of these polymeric structures are prepared, showing polarized luminescence with a moderate degree of polarization.

Ultrasensitive Optical Thermometry via Inhibiting the Energy Transfer in Zero-Dimensional Lead-Free Metal Halide Single Crystals

Self-referencing optical thermometry based on the fluorescence intensity ratio (FIR) have drawn extensive attention as a result of their high sensitivity and non-invasively fast response to temperature. However, it is a great challenge for luminescent materials to achieve simultaneously high absolute and relative temperature sensitivity based on the FIR technique. Herein, we developed a novel optical thermometer by designing hybrid lead-free metal halide (TTPhP)₂MnCl₄:Sb³⁺ (TTPhP⁺ = tetraphenylphosphonium cation) single crystals with multimodal photoluminescence (PL). The large TTPhP⁺ organic chain resulted in isolated [MnCl₄]^2- and [SbCl₅]^2- in the single crystal, which leads to a negligible energy trasfer process within them. Therefore, the two PL bands (band 1 from [MnCl₄]^2-) with a peak at 518 nm and band 2 (from [SbCl₅]²) with a peak at 640 nm exhibit different thermal-quenching effects, which resulted in excellent temperature sensitivity, with the maximum absolute and relative sensitivities reaching 0.236 K^-1 and 3.77% K^-1 in a temperature range from 300 to 400 K. Both the absolute and relative sensitivities are among the highest values for luminescence thermometry.

Structural Origin of Enhanced Circularly Polarized Luminescence in Hybrid Manganese Bromides

Chiral hybrid metal halides with a high dissymmetry factor (g_lum ) and a superior photoluminescence quantum yield (PLQY) are promising candidates for circularly polarized luminescence (CPL) light sources. Here, we report eight new chiral hybrid manganese halides, crystallizing in the non-centrosymmetric space group P2₁ 2₁ 2₁ and showing intense CPL emissions. Oppositely-signed circular dichroism (CD) and CPL signals are detected according to the R- and S-configurations of the chiral alkanolammonium cations. Time-resolved PL spectra show long averaged decay lifetimes up to 1 ms for (R-3-quinuclidinol)MnBr₃ (R-1). The g_lum of polycrystalline samples for coordinated structures (23×10^-3 ) is more than doubled compared with the non-coordinated ones (8.5×10^-3 ), due to the structural variations. R-1 exhibit both a high g_lum and a high PLQY (50.2 %). The effective chirality transfer mechanism through coordination bonds, with strongly emissive Mn^II centers, enables a new class of high-performance CPL materials.

Enantiomorphic Single Crystals of Linear Lead(II) Bromide Perovskitoids with White Circularly Polarized Emission

Chiroptical hybrid organic-inorganic perovskites are emerging as a new class of promising materials with mirror optical signal responses for optoelectronic applications. However, chiroptical white-emission materials have been scarcely unearthed. Herein, four pairs of hybrid lead(II) bromide perovskitoids were obtained, namely, (R)- and (S)-(H₂ MPz)PbBr₄ (R/S-MPz=(R)-(-)/(S)-(+)-2-methylpiperazine) (1 and 2), (R)- and (S)-(H₂ MPz)₃ Pb₂ Br₁₀ ⋅2 DMAc (3 and 4), (R)- and (S)-(H₂ MPz)PbBr₄ ⋅0.5 MeCN (5 and 6) and (R)- and (S)-(H₂ MPz)₂ Pb₂ Br₈ ⋅DCM (7 and 8). Notably, they all exhibit ultrabroadband emission and chiroptical signals. Perovskitoids 3-6 even achieve white circularly polarized emission with a high dissymmetric factor (g_lum ) (±3×10^-3 for 3 and 4; ±8×10^-3 for 5 and 6). This new type of hybrid perovskitoids will attract attention and find applications in chiroptical fields because of the extensively and easily tunable photophysical properties.

New Approach toward Dual-Emissive Organic-Inorganic Hybrids by Integrating Mn(II) and Cu(I) Emission Centers in Ionic Crystals

Inorganic-organic hybrid luminescent materials have received great attention for their potential applications in a wide range of clean/renewable energy-related areas, including photovoltaics and solid-state lighting. Herein, we present a unique and general "Mn + Cu" approach by blending two earth-abundant luminogenic metals, manganese and copper, within a single ionic structure to construct a remarkable family of low-cost and multifunctional hybrid materials featuring dual emission, as well as triboluminescence and second-harmonic generation response. The novel hybrid materials are made of diphosphine dioxide-chelated [Mn(O∧O)₃]²⁺ cations and various anionic [Cu_xI_y]^(y-x)- clusters, ensuring manifestation of dual phosphorescence streamed from octahedral Mn²⁺ ions (605-648 nm) and iodocuprate anions (480-728 nm). Noteworthily, the relative ratio of the emission bands, and hence a resulting emission chromaticity, can be tuned in a wide range through modification of cluster [Cu_xI_y]^(y-x)- modules. The structural diversity, enhanced robustness, and up to 100% luminescence quantum yield make the designed materials promising phosphors for lighting and sensing applications.

Organo-Metal Halide Scintillator with Weak Thermal Quenching Up to 200 °C

The prominent thermal quenching (TQ) effect of organic-inorganic metal halides limits their applications for lighting and imaging. Herein, we report an organo-metal halide scintillator (TTPhP)₂MnCl₄ (TTPhP⁺ = tetraphenylphosphonium cation), which exhibits a weak TQ effect up to 200 °C under ultraviolet-visible light (efficiency loss of 5.5%) and X-ray radiation (efficiency loss of 37%). The light yield of the (TTPhP)₂MnCl₄ scintillator (37 000 photons MeV^-1 at 200 °C) under X-ray radiation is >2 times that of the commercial scintillator LuAG:Ce (15 000 photons MeV^-1 at 200 °C). The microscopic mechanism of the weak TQ effect is demonstrated to be the scintillator having the ability to compensate for the emission losses from trapped charges and the large Mn-Mn distance (10.233 Å) suppressing nonradiative recombination at high temperatures. We further demonstrate the applications of (TTPhP)₂MnCl₄ as high-power white-light-emitting diodes operated at currents of ≤300 mA and X-ray imaging at 200 °C with a high spatial resolution.

Boosting Circularly Polarized Luminescence Performance by a Double π-Helix and Heteroannulation

Design challenges in the development of circularly polarized luminescence (CPL) materials are focused on balancing the luminescence dissymmetry factor (g_lum) and photoluminescence quantum yield (Φ_PL) by regulating the electric (μ) and magnetic (m) transition dipole moment vectors. Aiming at designing efficient CPL emitters and clarifying the chiroptical variation mechanism, herein, we present a double π-helix based on a cyclooctatetraene-embedded perylene diimide dimer that combines chirality with molecular entanglement and very high barriers for racemization. Through finely regulating the magnitudes of μ and m, the maximal dissymmetry factors |g_abs| and |g_lum| can be boosted to 0.035 and 0.030, respectively, as revealed by circular dichroism (CD) and CPL spectra. The results indicate a 3-fold improvement of g values and a modulated Φ_PL from 1a, 4, to 5 by nitrogen heteroannulation at the bay region. The CPL brightness (B_CPL) of 5 reaches a recorded value of up to 573.4 M^-1 cm^-1, among the highest values of chiral small molecules reported so far. This work has provided a comprehensive insight into a new class of chiral materials with high CPL activities, further laying molecular fundamentals for chiral optoelectronics.

All-Inorganic Manganese-Based CsMnCl3 Nanocrystals for X-Ray Imaging

Lead-based halide perovskite nanomaterials with excellent optical properties have aroused great attention in the fields of solar cells, light-emitting diodes, lasing, X-ray imaging, etc. However, the toxicity of lead prompts researchers to develop alternatives to cut down the usage of lead. Herein, all-inorganic manganese-based perovskite derivatives, CsMnCl3 nanocrystals (NCs), with uniform size and morphology have been synthesized successfully via a modified hot-injection method. These NCs have a direct bandgap of 4.08 eV and a broadband emission centered at 660 nm. Through introducing modicum lead (1%) into the CsMnCl3 NCs, the photoluminescence intensity greatly improves, and the quantum yield (PLQY) increases from 0.7% to 21%. Furthermore, the CsMnCl3 :1%Pb NCs feature high-efficiency of X-ray absorption and radioluminescence, which make these NCs promising candidates for X-ray imaging.

Dysprosium(III) Metal-Organic Framework Demonstrating Ratiometric Luminescent Detection of pH, Magnetism, and Proton Conduction

A multifunctional metal-organic framework, (Hdmbpy)[Dy(H₂dobdc)₂(H₂O)]·3H₂O (Dy-MOF, H₄dobdc = 2,5-dihydroxyterephthalic acid, dmbpy = 4,4'-dimethyl-2,2'-bipyridine), was synthesized and structurally characterized. The metal center Dy^III is connected by four carboxyl groups to form the [Dy₂(CO₂)₄] binuclear nodes, which are further interconnected by eight separate H₂dobdc^2- ligands to form a three-dimensional (3D) framework including hydrophilic triangular channels and abundant hydrogen-bonding networks. Dy-MOF has good stability in aqueous solution as well as in harsh acidic or alkaline solutions (pH range: 2.0-12.0). Furthermore, the luminescence signal of Dy-MOF undergoes a visualized color change as the acidity of the solution alters, which is the typical behavior of pH ratiometric probe. At a 100% relative humidity, Dy-MOF exhibits a high proton conductivity σ (1.70 × 10^-4 S cm^-1 at 303 K; 1.20 × 10^-3 S cm^-1 at 343 K) based on the proton hopping mechanism, which can be classified as a superionic conductor with σ exceeding 10^-4 S cm^-1. Additionally, the ferromagnetic interaction and magnetic relaxation behavior are simultaneously achieved in Dy-MOF. Herein, the combination of luminescence sensing, magnetism, and proton conduction in a single-phase 3D MOF may offer great potential applications in smart multitasking devices.