Size-Controllable Synthesis of Uniform Spherical Covalent Organic Frameworks at Room Temperature for Highly Efficient and Selective Enrichment of Hydrophobic Peptides

Hierarchically porous MOF@COF structures with ultrafast gas diffusion rate for C2H6/C2H4 separation

For ethylene purification, C2H6-selective metal-organic frameworks (MOFs) show great potential to directly produce polymer-grade C2H4 from C2H6/C2H4 mixtures. Most C2H6-traping MOFs are ultra-microporous structures so as to strengthen multiple supramolecular interactions with C2H6. However, the narrowed pore channels of C2H6-traping MOFs cause large guest diffusion barriers, greatly hampering their practical applications. Herein, we present a feasible strategy by precisely constructing hierarchically porous MOF@COF core-shell structures to address this issue. Additional mesoporous diffusion channels were incorporated between MOF crystals through the construction of the COF shell, thereby enhancing the gas adsorption kinetics. Notably, designing a core-shell MOF@COF structure with an optimal coating amount of mesoporous COF shell will further improve the gas diffusion rate. Breakthrough experiments reveal that the tailored MOF@COF composites can effectively achieve C2H6/C2H4 separation and maintain its separation performance over five continuous measurement cycles. This investigation opens up a new avenue to solve the diffusion/transfer issues and provides more opportunities and potentials for MOF@COF composites in practical separation applications.

Tuning the planarity of molecularly imprinted covalent organic frameworks for selective extraction of ochratoxin A in alcohol samples

Here, we report a monomer planarity modulation strategy for room-temperature constructing molecularly imprinted-covalent organic frameworks (MI-COFs) for selective extraction of ochratoxin A (OTA). 2,4,6-triformylphloroglucinol (Tp) was used as basic building block, while three amino monomers with different planarity were employed as modulators to explore the effect of planarity on the selectivity of MI-COFs. The MI-TpTapa constructed from Tp and the lowest planarity of monomer Tapa gave the highest selectivity for OTA, and was further used as the adsorbent for dispersed-solid phase extraction (DSPE) of OTA in alcohol samples. Coupling MI-TpTapa based DSPE with high-performance liquid chromatography allowed the matrix-effect free determination of OTA in alcohol samples with the limit of detection of 0.023 μg kg-1 and the recoveries of 91.4-97.6%. The relative standard deviation (RSD, n = 6) of intra and inter day was <3.2%. This work provides a new way to construct MI-COFs for selective extraction of hazardous targets.

Facile construction of a stable core-shell spherically magnetic polyimide covalent organic framework for efficient extraction of phenylurea herbicides

Efficient enrichment is crucial for the highly sensitive monitoring of phenylurea herbicides (PUHs) in various environmental waters. In this work, a stable core-shell spherically magnetic polyimide covalent organic framework (COF) was synthesized via a simple template-mediated precipitation polymerization method under mild conditions using tri(4-aminophenyl)amine (TAPA) and 3,3',4,4'-biphenyltetracarboxylic dianhydride (BPDA) as the building units (denoted as Fe3O4@TAPA-BPDA). The Fe3O4@TAPA-BPDA exhibits remarkable adsorption performance for PUHs with an optimized adsorption time of only 10 min. The adsorption of PUHs by Fe3O4@TAPA-BPDA followed the pseudo-second-order kinetic model and the Langmuir model. Furthermore, hydrogen bonding, halogen bonding, hydrophobic interaction, electro donor-acceptor interaction and π-π interactions are identified as the dominant mechanisms contributing to excellent adsorption performance. It was demonstrated that halogen bonds play an important role in the adsorption of substances containing chlorine atoms. The Fe3O4@TAPA-BPDA is easy to operate and highly regenerable. A simple magnetic solid-phase extraction (MSPE) method based on the Fe3O4@TAPA-BPDA was then developed for the rapid extraction of five PUHs in real samples, coupled with high-performance liquid chromatography (HPLC) determination. The analytical method developed has a linear range of 0.5-50 ng/mL, and the limit of detection (LOD) ranges from 0.06 to 0.10 ng/mL. The method exhibits good accuracy with recoveries ranged from 74.5 % to 111.4 %. The analytical method was successfully applied to the highly sensitive detection of PUHs in environmental water samples, which highlighting the potential application of the Fe3O4@TAPA-BPDA in the sample pretreatment.

Zr-based multivariate metal-organic framework for rapid extraction of sulfonamide antibiotics from water and food samples

Based on multiple ligands strategy, a series of multivariate metal organic frameworks (MTV-MOFs) named as PCN-224-DCDPSx were prepared using one-pot solvothermal method to extract and remove sulfonamide antibiotics (SAs). The pore structure and adsorption performance can be further regulated by modulating the doping ratios of medium-tetra(4-carboxylphenyl) porphyrin and 4,4'-dicarboxydiphenyl sulfones. The MTV-MOFs of PCN-224-DCDPS1.0 possesses very large specific surface area (1625 m2/g). Using PCN-224-DCDPS1.0 as sorbent, a dispersive solid-phase extraction method was developed to extract and preconcentrate SAs from water, eggs, and milk prior to high performance liquid chromatography analysis. The limits of detection of method were determined between 0.17 and 0.27 ng/mL with enrichment factors ranging 214-327. The adsorption can be finished within 30 s, and the recovery rate remains above 80 % after 10 repeated uses. The adsorption capacities of sorbent were determined from 300 to 621 mg/g for sulfadiazine, sulphapyridine, sulfamethoxydiazine, sulfachlorpyridazine, sulfabenzamide, and sulfadimethoxine. The adsorption mechanisms were investigated and can be attributed to π-π interactions, hydrogen bonds, and electrostatic interactions. This work represents a method for preparation of MTV-MOFs and uses as sorbent for extraction and enrichment of trace pollutants from complex samples.

Functional Covalent Organic Frameworks' Microspheres Synthesized by Self-Limited Dynamic Linker Exchange for Stationary Phases

Synthesizing uniform functional covalent organic framework (COF) microspheres is the prerequisite of applying COFs as novel stationary phases for liquid chromatography. However, the synthesis of functionalized COF microspheres is challenging due to the difficulty in maintaining microspheric morphology when conferring functions. Here, a facile and universal "self-limited dynamic linker exchange" strategy is developed to achieve surface functionalization of uniform COF microspheres. Six different types of COF microspheres are constructed, showing the universality and superiority of the strategy. The library of COF microspheres' stationary phases can be further enriched on demand by varying different functional building blocks. The "self-limited dynamic linker exchange" is attributed to the result of a delicate balance of reaction thermodynamics and molecular diffusion energy barrier. As a demonstration, the chiral functional COF microspheres are used as stationary phases of chiral chromatography and realized effective enantioseparation.

Self-Assembly of Super-Uniform Covalent Organic Framework Colloidal Particles into Multi-Dimensional Ordered Superstructures

Precise self-assembly of colloidal particles is crucial for understanding their aggregation properties and preparing macroscopic functional devices. It is currently very challenging to synthesize and self-assemble super-uniform covalent organic framework (COF) colloidal particles into well-organized multidimensional superstructures. Here, simple and versatile strategies are proposed for synthesis of super-uniform COF colloidal particles and self-assembly of them into 1D supraparticles, 2D ordered mono/multilayers, and 3D COF films. For this purpose, several self-assembly techniques are developed, including emulsion solvent evaporation, air-liquid interfacial self-assembly, and drop-casting. These strategies enable the superstructural self-assembly of particles of varying sizes and species without any additional surfactants or chemical modifications. The assembled superstructures maintain the porosity and high specific surface area of their building blocks. The feasibility of the strategies is examined with different types of COFs. This research provides a new approach for the controllable synthesis of super-uniform COF colloidal particles capable of self-assembling into multidimensional superstructures with long-range order. These discoveries hold great promise for the design of emerging multifunctional COF superstructures.

Tailoring the covalent organic frameworks based polymer materials for solar-driven atmospheric water harvesting

Atmospheric water harvesting through reticular materials is an innovation that has the potential to change the world. Here, this study offers a technique for creating a solar-powered hygroscopic polymer material for atmospheric water harvesting with the reticular materials. The results show that the porous hygroscopic polymer materials can achieve high performance with high vapor capture (up to ac. 28.8-49.7 mg/g at 28-38 %RH and 25  ℃), rapid photothermal conversion efficiency (up to 32.2 ℃ within 15 min under 1000 W/m-2 light at 25 ℃), a low desorption temperature (lower than 40 ℃), and an effective water release rate. Besides, the material also has excellent water-retention properties, which can effectively store desorbed liquid water in polymer networks for use by vegetation during water demand periods. The strategy opens new avenues for atmospheric water-harvesting materials, which will hopefully solve the global crisis of freshwater shortages.

Covalent organic frameworks in tribology - A perspective

Two-dimensional covalent organic frameworks (2D COFs) are an emerging class of crystalline porous materials formed through covalent bonds between organic building blocks. COFs uniquely combine a large surface area, an excellent stability, numerous abundant active sites, and tunable functionalities, thus making them highly attractive for numerous applications. Especially, their abundant active sites and weak interlayer interaction make these materials promising candidates for tribological research. Recently, notable attention has been paid to COFs as lubricant additives due to their excellent tribological performance. Our review aims at critically summarizing the state-of-art developments of 2D COFs in tribology. We discuss their structural and functional design principles, as well as synthetic strategies with a special focus on tribology. The generation of COF thin films is also assessed in detail, which can alleviate their most challenging drawbacks for this application. Subsequently, we analyze the existing state-of-the-art regarding the usage of COFs as lubricant additives, self-lubrication composite coatings, and solid lubricants at the nanoscale. Finally, critical challenges and future trends of 2D COFs in tribology are outlined to initiate and boost new research activities in this exciting field.

Preparation of GO/COFs composites by interlayer-confined strategy for the adsorption of nitro aromatic pollutants

With the continuous development of industrialization, the excessive emission of nitro aromatic with strong toxicity, high carcinogenicity and non-degradability has attracted great attention. How to efficiently remove nitro aromatic pollutants is an important research topic. In this work, graphene oxide/covalent organic frameworks (GO/COFs) composites were successfully synthesized via interlayer confinement strategy selecting GO, 2,5-dimethoxybenzene-1,4-dicarboxaldehyde (DMTP) and 1,3,5-tri(4-aminophenyl)benzene (TPB) as raw materials. Due to high specific surface area, hierarchical porous structure and good thermal stability, GO/COFs were utilized to adsorb and remove nitro aromatic hydrocarbons in the water environment. The adsorption behavior of GO/COFs for o-nitrophenol, 1,3-dinitrobenzene and 2,4,6-trinitrophenol were further investigated. The GO/COFs composites showed the strongest adsorption capacity for 2,4,6-trinitrophenol, and the maximum adsorption capacity for 2,4,6-trinitrophenol, o-nitrophenol, and 1,3-dinitrobenzene were 438, 317, and 173 mg g-1, respectively. The experimental results indicated that the GO/COFs composites provided great adsorption capability for nitro aromatic pollutants and can be reused, rendering it an extremely potential adsorbent for organic pollutants.

Simultaneous Protonation and Metalation of a Porphyrin Covalent Organic Framework Enhance Photodynamic Therapy

Covalent organic frameworks (COFs) have been explored for photodynamic therapy (PDT) of cancer, but their antitumor efficacy is limited by excited state quenching and low reactive oxygen species generation efficiency. Herein, we report a simultaneous protonation and metalation strategy to significantly enhance the PDT efficacy of a nanoscale two-dimensional imine-linked porphyrin-COF. The neutral and unmetalated porphyrin-COF (Ptp) and the protonated and metalated porphyrin-COF (Ptp-Fe) were synthesized via imine condensation between 5,10,15,20-tetrakis(4-aminophenyl)porphyrin and terephthalaldehyde in the absence and presence of ferric chloride, respectively. The presence of ferric chloride generated both doubly protonated and Fe3+-coordinated porphyrin units, which red-shifted and increased the Q-band absorption and disrupted exciton migration to prevent excited state quenching, respectively. Under light irradiation, rapid energy transfer from protonated porphyrins to Fe3+-coordinated porphyrins in Ptp-Fe enabled 1O2 and hydroxyl radical generation via type II and type I PDT processes. Ptp-Fe also catalyzed the conversion of hydrogen peroxide to hydroxy radical through a photoenhanced Fenton-like reaction under slightly acidic conditions and light illumination. As a result, Ptp-Fe-mediated PDT exhibited much higher cytotoxicity than Ptp-mediated PDT on CT26 and 4T1 cancer cells. Ptp-Fe-mediated PDT afforded potent antitumor efficacy in subcutaneous CT26 murine colon cancer and orthotopic 4T1 murine triple-negative breast tumors and prevented metastasis of 4T1 breast cancer to the lungs. This work underscores the role of fine-tuning the molecular structures of COFs in significantly enhancing their PDT efficacy.

Preparation of MIL-101(Cr)-NH2@TAPB-DVA-COF based membrane solid-phase extraction for efficient enrichment and sensitive determination of trace aromatic disinfection by-products in juice drinks

Aromatic disinfection by-products (DBPs) have garnered considerable interest in recent years for their potential carcinogenicity. However, efficient separation and enrichment of DBPs in complex samples is a challenge due to the extremely low content of aromatic DBPs and the complexity of sample matrices. In this study, a MIL-101(Cr)-NH2@TAPB-DVA-COF hybrid material was prepared as the enrichment medium of membrane solid-phase extraction (M-SPE) to efficiently determine trace emerging aromatic DBPs. This medium exhibited excellent enrichment capacity and selectivity for aromatic DBPs because of the strong hydrogen bonding, π-π stacking and hydrophobic interactions. An efficient analytical method for five aromatic DBPs in juice drinks was successfully established by use of this hybrid material as the enrichment medium for M-SPE in combination with liquid chromatography tandem mass spectrometry (LC-MS/MS). The limits of detection of the established method were from 0.50 to 3.00 ng/L. Moreover, the method had been successfully used in real juice drinks to determine trace five aromatic DBPs with the spiked recoveries ranging from 84.1% to 125%. The method possessed high analytical sensitivity and accuracy for these five aromatic DBPs in juice drinks with the aid of the efficient M-SPE technology proposed.

Covalent organic framework-sodium alginate-Ca2+-polyacrylic acid composite beads for convenient dispersive solid-phase extraction of neonicotinoid insecticides in fruit and vegetables

Neonicotinoids, the fastest-growing class of insecticides, have posed a multi-media residue problem with adverse effects on environment, biodiversity and human health. Herein, covalent organic framework-sodium alginate-Ca2+-polyacrylic acid composite beads (CACPs), facilely prepared at room temperature, were used in convenient dispersive solid-phase extraction (dSPE) and combined with high-performance liquid chromatography (HPLC) for the detection of five neonicotinoid insecticides (thiamethoxam, acetamiprid, dinotefuran, clothianidin, imidacloprid). CACPs can be completely separated within 1 min without centrifugation. After seven adsorption/desorption cycles, it maintained high extraction efficiencies (>90%). The developed method exhibited a wide linear range (0.01 ∼ 10 μg mL-1), low limits of detection (LODs, 0.0028 ∼ 0.0031 mg kg-1), and good repeatability (RSD ≤ 8.11%, n = 3). Moreover, it was applied to the determination of five neonicotinoids in fruit and vegetables (peach, pear, lettuce, cucumber, tomato), and recoveries ranged from 73.6% to 116.2%.

Efficient Proton Transfer and Charge Separation within Covalent Organic Frameworks via Hydrogen-Bonding Network to Boost H2O2 Photosynthesis

Photocatalytic synthesis based on the oxygen reduction reaction (ORR) has shown great promise for H2O2 production. However, the low activity and selectivity of 2e- ORR result in a fairly low efficiency of H2O2 production. Herein, we propose a strategy to enhance the proton-coupled electron transfer (PCET) process in covalent organic frameworks (COFs), thereby significantly boosting H2O2 photosynthesis. We demonstrated that the construction of a hydrogen-bonding network, achieved by anchoring the H3PO4 molecular network on COF nanochannels, can greatly improve both proton conductivity and photogenerated charge separation efficiency of COFs. Thus, COF@H3PO4 exhibited superior photocatalytic performance in generating H2O2 without sacrificial agents, with a solar-to-chemical conversion efficiency as high as 0.69%. Results indicated that a much more localized spatial distribution of energy band charge density on COF@H3PO4 led to efficient charge separation, and the small energy barrier of the rate-limiting step from *OOH to H2O2 endowed COF@H3PO4 with higher 2e- ORR selectivity.

Molecular and Heterojunction Device Engineering of Solution-Processed Conjugated Reticular Oligomers: Enhanced Photoelectrochemical Hydrogen Evolution through High-Effective Exciton Separation

Covalent organic frameworks (COFs) face limited processability challenges as photoelectrodes in photoelectrochemical water reduction. Herein, sub-10 nm benzothiazole-based colloidal conjugated reticular oligomers (CROs) are synthesized using an aqueous nanoreactor approach, and the end-capping molecular strategy to engineer electron-deficient units onto the periphery of a CRO nanocrystalline lattices (named CROs-Cg). This results in stable and processable "electronic inks" for flexible photoelectrodes. CRO-BtzTp-Cg and CRO-TtzTp-Cg expand the absorption spectrum into the infrared region and improve fluorescence lifetimes. Heterojunction device engineering is used to develop interlayer heterojunction and bulk heterojunction (BHJ) photoelectrodes with a hole transport layer, electron transport layer, and the main active layers, using a CROs/CROs-Cg or one-dimensional (1D) electron-donating polymer HP18 mixed solution via spinning coating. The ITO/CuI/CRO-TtzTp-Cg-HP18/SnO2/Pt photoelectrode shows a photocurrent of 94.9 µA cm‒2 at 0.4 V versus reversible hydrogen electrode (RHE), which is 47.5 times higher than that of ITO/Bulk-TtzTp. Density functional theory calculations show reduced energy barriers for generating adsorbed H* intermediates and increased electron affinity in CROs-Cg. Mott-Schottky and charge density difference analyses indicate enhanced charge carrier densities and accelerated charge transfer kinetics in BHJ devices. This study lays the groundwork for large-scale production of COF nanomembranes and heterojunction structures, offering the potential for cost-effective, printable energy systems.

High-Throughput Metabolic Pattern Screening Strategy for Early Colorectal and Gastric Cancers Based on Covalent Organic Frameworks-Assisted Laser Desorption/Ionization Mass Spectrometry

Precise early diagnosis and staging are conducive to improving the prognosis of colorectal cancer (CRC) and gastric cancer (GC) patients. However, due to intrusive inspections and limited sensitivity, the prevailing diagnostic methods impede precisely large-scale screening. In this work, we reported a high-throughput serum metabolic patterns (SMP) screening strategy based on covalent organic frameworks-assisted laser desorption/ionization mass spectrometry (hf-COFsLDI-MS) for early diagnosis and staging of CRC and GC. Notably, 473 high-quality SMP were extracted without any tedious sample pretreatment and coupled with multiple machine learning algorithms; the area under the curve (AUC) value is 0.938 with 96.9% sensitivity for early CRC diagnosis, and the AUC value is 0.974 with 100% sensitivity for early GC diagnosis. Besides, the discrimination of CRC and GC is accomplished with an AUC value of 0.966 for the validation set. Also, the screened-out features were identified by MS/MS experiments, and 8 metabolites were identified as the biomarkers for CRC and GC. Finally, the corresponding disordered metabolic pathways were revealed, and the staging of CRC and GC was completed. This work provides an alternative high-throughput screening strategy for CRC and GC and highlights the potential of metabolic molecular diagnosis in clinical applications.

In situ fabrication of covalent organic frameworks on solid-phase microextraction probes coupled with electrospray ionization mass spectrometry for enrichment and determination of androgens in biosamples

Solid-phase microextraction (SPME) coupled with electrospray ionization mass spectrometry (ESI-MS) was developed for rapid and sensitive determination of endogenous androgens. The SPME probe is coated with covalent organic frameworks (COFs) synthesized by reacting 1,3,5-tri(4-aminophenyl)benzene (TPB) with 2,5-dioctyloxybenzaldehyde (C8PDA). This COFs-SPME probe offers several advantages, including enhanced extraction efficiency and stability. The analytical method exhibited wide linearity (0.1-100.0 µg L-1), low limits of detection (0.03-0.07 µg L-1), high enrichment factors (37-154), and satisfactory relative standard deviations (RSDs) for both within one probe (4.0-14.8%) and between different probes (3.4-12.7%). These remarkable performance characteristics highlight the reliability and precision of the COFs-SPME-ESI-MS method. The developed method was successfully applied to detect five kinds of endogenous androgens in female serum samples, indicating that the developed analytical method has great potential for application in preliminary clinical diagnosis.

Large-size porous spherical 3D covalent organic framework for preconcentration of bisphenol F in water samples and orange juice

Large-size spherical sorbents with particle size of 10-50 μm are widely applied in separation fields, however it is still a great challenge to synthesize such large-size spherical covalent organic framework (COF). In this work, a type of large-size porous 3D COF was size-controablly synthesized via a two-step strategy, in which a large-size porous 3D spherical polymer was prepared first through a Pickering emulsion polymerization using nano silica as the stabilizer, and subsequently it was converted into porous spherical 3D COF by a solvothermal method. The as-prepared porous spherical COF (COF-320 as a model) showed size-controllable uniform spherical morphology within 15-45 μm, large specific surface area, fine crystalline structure, and good chemical stability. When used as the sorbent for dispersive solid-phase extraction (d-SPE) of bisphenol F (BPF), the porous spherical COF-320 (15 μm) displayed high adsorption capacity (Qmax = 335.6 mg/g), high enrichment factor (80 folds), and good reusability (at least five cycles). By coupling the d-SPE method to HPLC, a new analytical approach was developed and successfully applied to the determination of trace BPF in two water samples, an orange juice and a standard sample with recoveries of 96.0-102.2 % (RSD = 1.1-1.5 %), 95.7-97.4 % (RSD = 1.4-4.4 %) and 98.7 % (RSD = 2.3 %), respectively. The limit of detection (S/N = 3) and limit of quantification (S/N = 10) were 0.1 and 0.3 ng/mL, respectively. The new synthesis strategy opens a viable way to prepare large-size porous spherical COFs, and the developed analytical method can be potentially applied to sensitively detect the trace BPF in water samples and beverages.

Construction of tissue-engineered vascular grafts with enhanced patency by integrating heparin, cell-adhesive peptide, and carbon monoxide nanogenerators into acellular blood vessels

Small-diameter tissue-engineered vascular grafts (sdTEVGs) have garnered significant attention as a potential treatment modality for vascular bypass grafting and replacement therapy. However, the intimal hyperplasia and thrombosis are two major complications that impair graft patency during transplantation. To address this issue, we fabricated the covalent-organic framework (COF)-based carbon monoxide (CO) nanogenerator-and co-immobilized with LXW-7 peptide and heparin to establish a multifunctional surface on TEVGs constructed from acellular blood vessels for preventing thrombosis and stenosis. The cell-adhesive peptide LXW-7 could capture endothelial-forming cells (EFCs) to promote endothelialization, while the antithrombotic molecule heparin prevented thrombus formation. The reactive oxygen species (ROS)-triggered CO release suppressed the adhesion and activation of macrophages, leading to the reduction of ROS and inflammatory factors. As a result, the endothelial-to-mesenchymal transition (EndMT) triggered by inflammation was restricted, facilitating the maintenance of the homeostasis of the neo-endothelium and preventing pathological remodeling in TEVGs. When transplanted in vivo, these vascular grafts exhibited negligible intimal hyperplasia and remained patent for 3 months. This achievement provided a novel approach for constructing antithrombotic and anti-hyperplastic TEVGs.

Amphiphilic Covalent Organic Framework Nanoparticles for Pickering Emulsion Catalysis with Size Selectivity

Exploiting advanced amphiphilic solid catalysts is crucial to the development of Pickering emulsion catalysis. Herein, covalent organic framework (COF) nanoparticles constructed with highly hydrophobic monomers as linkers were found to show superior amphiphilicity and they were then developed as a new class of solid emulsifiers for Pickering emulsion catalysis. Employing amphiphilic COFs as solid emulsifiers, Pickering emulsions with controllable emulsion type and droplet sizes were obtained. COF materials have also been demonstrated to serve as porous surface coatings to replace traditional surface modifications for stabilizing Pickering emulsions. After implanting Pd nanoparticles into amphiphilic COFs, the obtained catalyst displayed a 3.9 times higher catalytic efficiency than traditional amphiphilic solid catalysts with surface modifications in the biphasic oxidation reaction of alcohols. Such an enhanced activity was resulted from the high surface area and regular porous structure of COFs. More importantly, because of their tunable pore diameters, Pickering emulsion catalysis with remarkable size selectivity was achieved. This work is the first example that COFs were applied in Pickering emulsion catalysis, providing a platform for exploring new frontiers of Pickering emulsion catalysis.

Chiral hydroxyl-controlled covalent organic framework-modified stationary phase for chromatographic enantioseparation

Chiral covalent organic frameworks (CCOFs) possess a superior chiral recognition environment, abundant pore configuration, and favorable physicochemical stability. In the post-synthetic chiral modification of COFs, research usually focused on increasing the density of chiral sites as much as possible, and little attention has been paid to the influence of the density of chiral sites on the spatial structure and chiral separation performance of CCOFs. In this article, 1,3,5-tris(4-aminophenyl) benzene (TPB), 2,5-dihydroxyterephthalaldehyde (DHTP), and 2,5-dimethoxyterephthalaldehyde (DMTP) served as the platform molecules to directly establish hydroxyl-controlled COFs through Schiff base condensation reactions. Then the novel chiral selectors 6-deoxy-6-[1-(2-aminoethyl)-3-(4-(4-isocyanatobenzyl)phenyl)urea]-β-cyclodextrin (UB-β-CD) were pended into the micropore structures of COFs via covalent bond for further construction the [UB-β-CD]x-TPB-DMTP COFs (x represents the density of chiral sites). The chiral sites density on [UB-β-CD]x-TPB-DMTP COFs was regulated by changing the construction proportion of DHTP to obtain a satisfactory CCOFs and significantly improve the ability of chiral separation. [UB-β-CD]x-TPB-DMTP COFs were coated on the inner wall of a capillary via a covalently bonding strategy. The prepared open tubular capillary exhibited strong and broad enantioselectivity toward a variety of chiral analytes, including sixteen racemic amino acids and six model chiral drugs. By comparing the outcomes of chromatographic separation, we observed that the density of chiral sites in CCOFs was not positively correlated with their enantiomeric separation performance. The mechanism of chiral recognition [UB-β-CD]x-TPB-DMTP COFs were further demonstrated by molecular docking simulation. This study not only introduces a new high-efficiency member of the COFs-based CSPs family but also demonstrates the enantioseparation potential of CCOFs constructed with traditional post-synthetic modification (PSM) strategy by utilizing the inherent characteristics of porous organic frameworks.

Lung metastasis-Harnessed in-Situ adherent porous organic nanosponge-mediated antigen capture for A self-cascaded detained dendritic cells and T cell infiltration

The infiltration of cytotoxic T lymphocytes promises to suppress the most irresistible metastatic tumor for immunotherapy, yet immune privilege and low immunogenic responses in these aggressive clusters often restrict lymphocyte recruitment. Here, an in situ adherent porous organic nanosponge (APON) doubles as organ selection agent and antigen captor to overcome immune privilege is developed. With selective organ targeting, the geometric effect of APON composed of disc catechol-functionalized covalent organic framework (COF) boosts the drug delivery to lung metastases. Along with a self-cascaded immune therapy, the therapeutic agents promote tumor release of damage-associated molecular patterns (DAMPs), and then, in situ deposition of gels to capture these antigens. Furthermore, APON with catechol analogs functions as a reservoir of antigens and delivers autologous DAMPs to detain dendritic cells, resulting in a sustained enhancement of immunity. This disc sponges (APON) at lung metastasis as antigen reservoirs and immune modulators effectively suppress the tumor in 60 days and enhanced the survival rate.

Covalent Organic Frameworks: Opportunities for Rational Materials Design in Cancer Therapy

Nanomedicines are extensively used in cancer therapy. Covalent organic frameworks (COFs) are crystalline organic porous materials with several benefits for cancer therapy, including porosity, design flexibility, functionalizability, and biocompatibility. This review examines the use of COFs in cancer therapy from the perspective of reticular chemistry and function-oriented materials design. First, the modification sites and functionalization methods of COFs are discussed, followed by their potential as multifunctional nanoplatforms for tumor targeting, imaging, and therapy by integrating functional components. Finally, some challenges in the clinical translation of COFs are presented with the hope of promoting the development of COF-based anticancer nanomedicines and bringing COFs closer to clinical trials.

Fluorine-functionalized covalent organic framework as efficient solid phase extraction sorbent for adsorption of aflatoxins in nuts

In this study, a new fluorine-functionalized covalent organic framework (F-COF) was designed and fabricated by the direct polycondensation of tris(4-aminophenyl)amine and 2,3,5,6-tetra-fluoroterephthaldehyde for the first time. F-COF exhibited a remarkably enhanced adsorption capability compared with that of the fluorine-free COF. The favorable adsorption of aflatoxins was attributed to multiple interactions including pseudo hydrogen bond, F-O, π-π, F-π interactions and hydrophobic interactions between F-COF and aflatoxins. By coupling F-COF based solid phase extraction with high-performance liquid chromatography equipped with fluorescence detector, a rapid and sensitive method for determining aflatoxins (aflatoxin B1, B2, G1 and G2) in nuts (peanuts and pistachios) was established. Under optimal conditions (35 mg F-COF, 100 mL sample solution, 3 mL min-1 as sample loading rate, pH<7, 0.2 mL acetonitrile as desorption solvent), the limits of detection for aflatoxins were 0.02-0.30 ng g-1. The linear range was 0.08-16.0 ng g-1 and the recoveries of the F-COF-based method were 83.5-114 % with relative standard deviations less than 8.0 %.

Superhydrophilic Triazine-Based Covalent Organic Frameworks via Post-Modification of FeOOH Clusters for Boosted Photocatalytic Performance

The triazine-based covalent organic frameworks (tCOF), an intriguing subtype of COFs, are expected as highly promising photocatalysts for various photocatalytic applications owing to their fully conjugated structures and nitrogen-rich skeletons. However, the inherent hydrophobicity and fast recombination of photoexcited electron-hole pairs are two main factors hindering the application of tCOF in practical photocatalytic reactions. Here, a post-synthetic modification strategy to fabricate superhydrophilic tCOF-based photocatalysts is demonstrated by in situ growing FeOOH clusters on TaTz COF (TaTz-FeOOH) for efficient photocatalytic oxidation of various organic pollutants. The strong polar FeOOH endows TaTz-FeOOH with good hydrophilic properties. The well-defined heterogeneous interface between FeOOH and TaTz allows the photoelectrons generated by TaTz to be consumed by Fe (III) to transform into Fe (II), synergistically promoting the separation of holes and the generation of free radicals. Compared with the unmodified TaTz, the optimized TaTz-FeOOH (1%) shows excellent photocatalytic performance, where the photocatalytic degrade rate (k) of rhodamine B is increased by about 12 times, and the degradation rate is maintained at 99% after 5 cycles, thus achieving efficient removal of quinolone antibiotics from water. This study provides a new avenue for the development of COF-based hydrophilic functional materials for a wide range of practical applications.

An in-situ blocking strategy for improved anti-interference inspection of AFB1 based on hollow covalent organic framework capsules with commodious and undisturbed microenvironment

This work proposed an in-situ blocking strategy for improved anti-interference and signal-amplified inspection of hazards via constructing hollow covalent organic framework (HCOF) capsules. An aptamer-FRET nanoprobe integrated with carbon dots and CuS was introduced into the micro-capsule as signal indicator to demonstrate the proof-of-concept. The HCOF was successfully prepared by removing the metal-organic frameworks (MOF) core from the MOF@COF that had been preloaded with the nanoprobes under mild conditions. Meanwhile, the hydrophobic surface of HCOF enhanced the adsorption and penetration of aflatoxin B1 (AFB1) into the capsule to interact with the nanoprobes. This strategy was applied to detect AFB1 in food samples, achieving a linear response of 1-300 nM along with a detection limit of 0.3 nM. Selectivity test verified that the prepared sensing platform could specifically recognize AFB1 without complex sample pretreatment. This study provides new ideas for improved anti-interference inspection of hazards against complex sample matrix.

Size-controllable synthesis of large-size spherical 3D covalent organic frameworks as efficient on-line solid-phase extraction sorbents coupled to HPLC

BACKGROUND

Covalent organic frameworks (COFs) have found promising applications in separation fields due to their large surface area and high adsorption capacity, but the exiting COFs can not be directly used as the packing materials of on-line solid-phase extraction (SPE) coupled to HPLC and HPLC because their nano/submicron size or irregular shapes might cause ultrahigh column back pressure and low column efficiency. To synthesize the large-size spherical COFs larger than 3 μm as sorbents might be able to address these problems, however it is still a great challenge till now.

RESULTS

In this work, two large-size spherical 3D COFs (COF-320 and COF-300) were size-controllably synthesized within 10-90 μm via a two-step strategy. These two spherical COFs showed large surface area, fine crystallinity, good chemical/mechanical stability, and good reproducibility. As an application case, when used as the on-line SPE sorbents coupled to HPLC, the large-size spherical COF-320 displayed high binding capacity for bisphenol F (Qmax of 452.49 mg/g), low column back pressure (6-8 psi at flow rate of 1 mL/min), and good reusability (at least 30 cycles). The developed on-line-SPE-HPLC-UV method presented good analytical performance with enrichment factor of 667 folds, linear range of 1.0-400 ng/mL, limit of detection (LOD, S/N = 3) of 0.3 ng/mL, limit of quantification (LOQ, S/N = 10) of 1.0 ng/mL, and recoveries of 100.3-103.2 % (RSDs of 2.0-3.5 %) and 95.2-97.0 % (RSDs of 4.3-5.6 %) for tap water and lake water samples, respectively.

SIGNIFICANCE

This is the first case to synthesize the large-size spherical COFs within 10-90 μm, and this work made it possible to directly use COFs as the filling materials of on-line SPE coupled to HPLC and HPLC. The developed analytical method can be potentially applied to the rapid and sensitive detection of trace bisphenol F in environmental water samples.

Controllable synthesis of uniform flower-shaped covalent organic framework microspheres as absorbent for solid-phase extraction of trace 2,4-dichlorophenol

Controllable synthesis of micro-flower covalent organic frameworks (MFCOFs) with controllable size, monodisperse, spherical, and beautiful flower shape was realized by using 2,5-diformylfuran (DFF) and p-phenylenediamine (p-PDA) as building blocks at room temperature. High-quality MFCOFs (5 - 7 μm) were synthesized by controlling the kind of solvent, amounts of monomers, catalyst content, and reaction time. The synthesized MFCOFs possessed uniform mesopores deriving from the intrinsic pores of frameworks and wide-distributed pores belonging to the gap between the petals. The MFCOFs-packed solid-phase extraction (SPE) column shows adsorption capacity of about 8.85 mg g-1 for 2,4-dichlorophenol (2,4-DCP). The MFCOF-based SPE combined with the HPLC method was established for the determination of 2,4-DCP in environmental water. The linear range of this method is 20-1000 ng mL-1 (R2 > 0.9994), and limit of detection (S/N = 3) is 10.9 ng mL-1. Spiked recoveries were 94.3-98.5% with relative standard deviations lower than 2.3%.

Poly(ionic liquid)s threaded into covalent organic framework for synergistic capture of polybrominated diphenyl ethers

The efficient enrichment of trace polybrominated diphenyl ethers (PBDEs) in environmental waters remains challenging for environmental monitoring and analysis. Herein, a covalent organic frameworks-poly(ionic liquid)s hybrid material (COF-γ-PIL) is synthesized by threading poly(1-vinyl-3-methylimidazolium bis ((trifluoromethyl) sulfonyl) imide) into a vinyl-decorated COF via photopolymerization. The resultant hybrid retains the crystallinity and porosity of COF, thus offering adequate adsorption sites for the targets. PIL threaded in COF facilitates the synergistic capture of target molecules within the hybrid through multiple interactions, including Van der Waals forces, weak hydrogen bonding, and hydrophobic interactions. As a proof of concept, COF-γ-PIL was utilized as the fiber coating for SPME of PBDEs in waters prior to their analysis via GC-MS. Excellent analytical results were achieved, with wide linearity (0.01-100 ng L-1), low limits of detection (0.0021-0.014 ng L-1), and satisfactory recoveries (78.6%-103.6%). The outstanding extraction performance can be ascribed to the extraordinary flexibility of the active fraction on linear polymers threaded in COF, which facilitates collaborative capture for target molecules, as revealed by density functional theory (DFT) calculations. This work uncovers the microscopic mechanism for PBDEs capturing and provides new insights into the design of functionalized COF hybrids.

Flower-like calix[6]arene-based covalent organic framework for membrane extraction of sulfonamides in animal-derived food through host-guest interaction prior to determination with ultra-high performance liquid chromatography-tandem mass spectrometry

Supramolecular macrocycle-based covalent organic frameworks (COFs) are promising adsorbents for adsorption of hazards due to their host-guest recognition property. However, most supramolecular macrocycles are conformationally flexible, making them challenging to introduce into COFs. In this work, a calix[6]arene-based COF (CX6-BD COF) was fabricated with a unique flower-like morphology and high crystallinity. Especially, the cavity of CX6 exhibited host-guest inclusion interaction for sulfonamides (SAs), which was verified by quantum chemistry calculation. The integration of the porosity of COFs with the recognition cavity of CX6 made CX6-BD COF display excellent enrichment performance for SAs, with good enrichment factors (EFs) between 77 and 96. The material was employed as an adsorbent for COF membrane filter extraction, coupled with ultra-high performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS) to simultaneously enrich and determine seven SAs in animal-derived food. The analytical method showed a wide linear range (0.01-100 µg/L and 0.05-100 µg/L) and low detection limits (3-10 ng/L). The established method was successfully applied to sensitively determine SAs in chicken, pork and beef samples, which achieved satisfactory recoveries (73.8-113%). These results demonstrated CX6-BD COF has good application potential in determination of trace and ultra-trace SAs in complex food matrices as an adsorbent.

In situ growth of imine-based covalent organic framework as stationary phase for open-tubular capillary electrochromatographic separation

Designing advanced stationary phases to improve separation efficiency is essential in capillary electrochromatography. Due to their outstanding performance, covalent organic frameworks have recently demonstrated considerable promise in the field of separation science. Herein, an open-tubular capillary electrochromatography method was reported using porous imine-based covalent organic framework with sufficiently available interaction sites as stationary phase. The imine-based covalent organic framework coated capillary was easily prepared via an in situ growth method at room temperature, and its separation performance was evaluated, indicating the high separation efficiency for three types of analytes, including herbicides, polybrominated dibenzofurans, and bisphenols. Moreover, the imine-based covalent organic framework coated capillary showed good reproducibility and stability, with intraday (n = 3), interday (n = 3), and column-to-column (n = 3) relative standard deviations of retention time and peak areas of less than 5%. The separation efficiency of the coated capillary remained unchanged even after 200 runs and the maximum theoretical plates reached up to 85 595 N/m for 4,4'-ethylidenebisphenol. It was predicted that the imine-based covalent organic framework stationary phase would be a strong contender for chromatographic separation with high efficiency.

Enhanced Photothermal Activity of Nanoconjugated System via Covalent Organic Frameworks as the Springboard

The development of nanomaterials with high photothermal conversion efficiency has been a hot issue. In this work, a novel photothermal nanomaterial is synthesized using Prussian blue nanocubes (PBNCs) as the photothermal active substance and covalent organic framework (COF) as the substrate. The as-prepared COF@PBNCs show a high photothermal conversion efficiency of 59.1%, significantly higher than that of pure PBNCs (32.5%). A new circuit path is generated with the combination of COF, which prevents the direct combination of thermal electrons and holes, as well as enhances the nonradiation transition of PBNCs. Besides, the imine groups on COF as the coordination and reduction agent allow the in situ growth of PBNCs, and the dense micropores of COF as the ideal heat conduction channels can also be the potential factors for the enhanced photothermal property. The photothermal property of COF@PBNCs is further used in the construction of immunosensor for the detection of furosemide (FUR). With the help of handheld thermal imager, the concentration of FUR can be easily read, thus shedding a new light in the construction of visual sensor for simple and low-cost point-of-care testing.

Designed Nanomaterials-Assisted Proteomics and Metabolomics Analysis for In Vitro Diagnosis

In vitro diagnosis (IVD) is pivotal in modern medicine, enabling early disease detection and treatment optimization. Omics technologies, particularly proteomics and metabolomics, offer profound insights into IVD. Despite its significance, omics analyses for IVD face challenges, including low analyte concentrations and the complexity of biological environments. In addition, the direct omics analysis by mass spectrometry (MS) is often hampered by issues like large sample volume requirements and poor ionization efficiency. Through manipulating their size, surface charge, and functionalization, as well as the nanoparticle-fluid incubation conditions, nanomaterials have emerged as a promising solution to extract biomolecules and enhance the desorption/ionization efficiency in MS detection. This review delves into the last five years of nanomaterial applications in omics, focusing on their role in the enrichment, separation, and ionization analysis of proteins and metabolites for IVD. It aims to provide a comprehensive update on nanomaterial design and application in omics, highlighting their potential to revolutionize IVD.

New insights on the preparation of amine covalent organic polymer and its adsorption properties

Dye pollution is becoming increasingly severe. This study used the Schiff base reaction to synthesize a polyaromatic ring covalent organic polymer material with amide bonds and high electronegativity named SLEL-9 to adsorb Methylene Blue (MB) and Rhodamine B (RhB). SLEL-9 was characterized by Fourier transform infra-red spectra, X-ray photoelectron spectra, Brunauer-Emmett-Teller (BET), zeta potential analysis, and other techniques. It was found that SLEL-9 material contains C-C, CN, C-N, and CO. SLEL-9 had a zeta potential of about -45 mV under neutral conditions, which proved that the material had been synthesized successfully. The BET and Langmuir surface areas of SLEL-9 were 35.187 m2 g-1 and 56.419 m2 g-1, respectively. The adsorptions of SLEL-9 on low concentration (10 mg L-1) Methylene Blue and Rhodamine B reached equilibrium within 48 h. The results showed that SLEL-9's adsorption of dye molecules are more consistent with pseudo-second-order kinetic and Langmuir isotherm model. The adsorption experiments showed that the adsorption process is a spontaneous endothermic reaction, mainly chemisorption. The maximum adsorption capacity of SLEL-9 for MB and RhB were 132.45 mg g-1 and 101.94 mg g-1. In addition, this study investigated to determine the optimal reaction parameters. The primary mechanisms of SLEL-9 adsorption of two dyes are n→π* interaction, π-π EDA interaction and electrostatic attraction. Selective adsorb ability experiment results showed that SLEL-9 could selectively adsorb MB and RhB to a certain extent. Finally, it was found that SLEL-9 can maintain over 70% adsorption capacity after five reuses and can maintain stability after soaking in different pH water and organic solvents for 120 h. SLEL-9 proved to be a promising organic covalent polymer adsorption material for the removal of Methylene Blue and Rhodamine B in water.

Preparation of Well-Constructed and Metal-Modified Covalent Organic Framework Nanoparticles for Biosensing Design with Cascade Catalytic Capability

Uniform covalent organic framework nanoparticles (COF NPs) with a well-defined pore structure may provide a robust platform for scaffolding enzymes. Herein, bipyridine-based spherical COF NPs have been successfully prepared in this work through the Schiff base condensation reaction. Moreover, they are functionalized by metal modification and are further used for biosensor fabrication. Experimental results reveal that the metal-modified COF NPs also display impressive peroxidase-like catalytic activities, while they can load enzymes, such as glucose oxidase (GOx) and sarcosine oxidase (SOx), to develop a cascade catalysis system for design of various kinds of biosensors with very well performance. For example, the optimized GOx@Fe-COFs can achieve a sensitive detection of glucose with a low limit of detection (LOD) of 12.8 μM. Meanwhile, the enzymes also exhibit a commendable preservation of 80% enzymatic activity over a span of 14 days under ambient conditions. This work may pave the way for advancing cascade catalysis and the analysis of different kinds of biological molecules based on COF NPs.

An urchin-shaped covalent organic framework with rich nitrogen for efficient removal of neonicotinoid insecticides in honey and fruits

Neonicotinoid insecticides (NEOs) are widely used because of their high efficiency, low dosage and long duration. However, the residues of NEOs could cause the collapse of bee population and even threaten human health. Herein, an urchin-shaped covalent organic framework with rich nitrogen (U-COF) was synthesized with 2,4,6-tri(4-aminophenyl)-1,3,5-triazine (TZT) and 2,5-divinyl-1,4-benzaldehyde (DVA) by adjusting the catalyst (acetic acid) concentration for adsorptive removal of NEOs. This U-COF with hierarchical structure showed good adsorption capacities for imidacloprid, acetamiprid and thiamethoxam at 217.2, 177.2 and 147.5 mg/g, respectively. The nitrogen-rich structure and abundant π electron system of U-COF also improved the adsorption capacity for NEOs. π-π interaction, hydrophobic interaction, and hydrogen bonding between adsorbent and target are the main reasons for the good adsorption effect. After five adsorption-desorption cycles, U-COF still shows good adsorption capacity. What is more important is that the high adsorption capacity of NEOs from honey and fruits was achieved by using U-COF, illustrating the great potential as sorbents for real samples.

Two-Dimensional Covalent Organic Frameworks as Tailor-Made Scaffolds for Water Harvesting

Developing materials to harvest water from the air is of great importance to alleviate the water shortage for people living in arid regions, where the annual average relative humidity (RH) is lower than 0.4. In this work, we report a general nitrogen atom incorporation strategy to prepare high-performance covalent organic frameworks (COFs) for water harvesting from the air in arid areas. A series of COFs, namely COF-W1, COF-W2, and COF-W3 were developed for this purpose. Different contents of nitrogen were embedded into COFs by incorporating pyridine units into the building blocks. With the increasing content of nitrogen from COF-W1 to COF-W3, the inflection points of their water isotherms shift distinctly from RH values from 0.65 to 0.25. Significantly, COF-W3 exhibits the lowest inflection point at a low RH value of 0.25 and reaches a high uptake capacity of 0.28 g g-1 at 25 °C with a low hysteresis loop. Moreover, the gram-scale COF-W3 retains its high performance, which renders it more attractive in water harvesting. This work demonstrates the feasibility of this nitrogen incorporation strategy to acquire high-performance COFs as water harvesters in the future.

Ionic liquid/covalent organic framework/silica composite material: Green synthesis and chromatographic evaluation

BACKGROUND

Due to their large surface area and distinctive adsorption affinity, covalent organic frameworks (COFs) appear to be good candidates as liquid chromatographic separation materials with good application prospect. The development of COF materials in chromatographic science is currently in an exploratory stage. Especially, the practicability of COF@silica composite materials as liquid chromatographic stationary phases needs further exploration. Reasonably integrating a functional component such as ionic liquid (IL) into the COF@silica composite materials may provide customized functionality to achieve the purpose of synthesizing multi-functional COF based stationary phases.

RESULTS

In this study, an IL modified COF bonded silica composite material (IL-COF@SiO2) was successfully synthesized by using an environmentally friendly deep eutectic solvent as the reaction medium instead of the frequently-used organic solvent. The synthesized IL-COF@SiO2 composite material combines the excellent separation ability of COF and the excellent mass transfer function of spherical porous silica microsphere, and meanwhile, the introduction of IL endows COF@SiO2 with preferable separation performance. The slurry-packed IL-COF@SiO2 liquid chromatographic column could be applied to effectively separate hydrophobic and hydrophilic compounds with preferable separation selectivity and high column efficiency. By investigating the retention behavior and influencing factors, a mixed-mode retention mechanism was found. Multiple interaction forces endow the IL-COF@SiO2 with a hydrophilic-hydrophobic balance performance, demonstrating a good application prospect as a versatile liquid chromatographic separation material.

SIGNIFICANCE

In this study, a new strategy is proposed for greenly synthesizing a novel IL-COF@SiO2 composite material under mild conditions, which expands the potential application of COF materials in chromatographic science. One particular point to note is that the reaction medium in each step of the preparation process is low toxic and degradable deep eutectic solvent, which conforms to the concept of green chemistry.

A self-powered photoelectrochemical biosensing platform for H-FABP monitoring mediated by CsPbBr3@COF-V

Advanced bioelectronic detection based on the integration of modern optical electronics and biological systems has a broad prospect. The strategy of cathode signal amplification in self-powered photoelectrochemical (PEC) immunosensors with excellent performance is rarely reported in the field of immune analysis. Herein, the work demonstrates a self-powered PEC biosensor formed with BiOI photocathode and WO3/SnS2/ZnS photoanode, and CsPbBr3@COF-V was used as the photocathode signal quenching source for the quantitative monitoring of heart fatty acid binding protein (H-FABP). The high efficiency and stable self-powered biosensor formed not only provides continuous and powerful photocurrent response for bioanalysis through reasonable stepped band structure, but also effectively eliminates the interference of reducing substances. The quenching source CsPbBr3@COF-V greatly affects the photocurrent response due to steric hindrance, weak conductivity, competition with the substrate for dissolved oxygen and excitation light source. And the intervention of this key factor achieves multiple signal amplification effect and opens up an innovative vision for self-powered PEC immunosensor. Taking H-FABP as a representative analyte, the proposed signal amplification self-powered photoelectrochemical presents a broad linear range from 0.0005 to 150 ng/mL with the detection limit of 0.19 pg/mL.

Chemically Asymmetric Polymers Manipulate the Crystallization of Two-Dimensional Covalent Organic Frameworks to Synthesize Processable Nanosheets

Nanosheets derived from two-dimensional covalent organic frameworks (2D COFs) are increasingly desirable in various fields. While breakthroughs in the chemical and physical delamination of 2D COFs are rising, precisely regulating the growth of the COF nanosheets has not been realized yet. Herein, we report an effective strategy of polymer-manipulated crystallization to accurately control the growth of COF nanosheets. Chemically asymmetric polyvinylpyrrolidone (PVP) is developed as the manipulator that selectively interacts with the aldehydes and (100) facet to induce anisotropic growth of COFs. The number of PVP constitutional units determines this specific interaction, leading to molecularly thin but thickness-controllable nanosheets with excellent dispersity. We process these nanosheets into robust A4-sized membranes for ultraselective molecular separation. The membrane intercalated with long-chain PVP demonstrates largely improved performance, surpassing the reported COF membranes. This work reports a strategy for anisotropically crystallizing 2D COFs to yield processable nanosheets toward practical applications.

Green and Facile Preparation of Covalent Organic Frameworks Based on Reaction Medium for Advanced Applications

Covalent organic frameworks (COFs), as a new class of crystalline, well-ordered, and porous materials with intermittent constructions, are formed via organic structural parts connected through covalent bonds. These materials have been employed in several fields comprising pollutant adsorption and separation, catalysis, electrical conductivity, gas storage, etc. The preparation of COFs is mainly applied in tubes with high temperatures and degassing treatment. Furthermore, the reaction medium is involved in toxic organic solvents like toluene, dioxane, mesitylene, acetonitrile, and so on. Hence, discovering clean medium and green approaches has attracted wide attention. Recently, facile, less dangerous, and greener methods have been developed for COFs synthesis in diverse applications like performing the reaction at ambient temperature or employing aqueous solvents, ionic liquids, and a mixture of organic solvents/water. This review article summarizes the eco-friendly production approaches of COFs for diverse applications.

Functional Covalent Organic Framework (COF) Nanoparticles for Biomimic Mineralization and Bacteria Inhabitation

Biomimic mineralization of hard tissues with hierarchical structures is a challenging task, while designing multifunctional materials possessing both the ability of biomimic mineralization and drug delivery is even more difficult. Herein, inspired by the multilevel structure and mineralization ability of amelogenin, a novel carboxyl-functionalized covalent organic framework (COF) nanosphere material was designed and synthesized, which exhibited a significant biomimetic remineralization ability as demonstrated on SiO2 glass, Ti6Al4V, and an acid-etched enamel surface. Furthermore, the nanoporous structure also enables the COF nanospheres to serve as a drug delivery system for the controlled release of antibacterial drugs. This work provides a promising strategy for the design of multifunctional biomimic materials.

Continuous Covalent Organic Frameworks Membranes: From Preparation Strategies to Applications

Covalent organic frameworks (COFs) are porous crystalline polymeric materials formed by the covalent bonding of organic units. The abundant organic units library gives the COFs species diversity, easily tuned pore channels, and pore sizes. In addition, the periodic arrangement of organic units endows COFs regular and highly connected pore channels, which has led to the rapid development of COFs in membrane separations. Continuous defect-free and high crystallinity of COF membranes is the key to their application in separations, which is the most important issue to be addressed in the research. This review article describes the linkage types of covalent bonds, synthesis methods, and pore size regulation strategies of COFs materials. Further, the preparation strategies of continuous COFs membranes are highlighted, including layer-by-layer (LBL) stacking, in situ growth, interfacial polymerization (IP), and solvent casting. The applications in separation fields of continuous COFs membranes are also discussed, including gas separation, water treatment, organic solvent nanofiltration, ion conduction, and energy battery membranes. Finally, the research results are summarized and the future prospect for the development of COFs membranes are outlined. More attention may be paid to the large-scale preparation of COFs membranes and the development of conductive COFs membranes in future research.

Facile synthesis of spherical covalent organic frameworks for enrichment and quantification of aryl organophosphate esters in mouse serum and tissues

Here, an imine-linked-based spherical covalent organic framework (COF) was prepared at room temperature. The as-synthesized spherical COF served as an adsorbent in dispersive solid-phase extraction (dSPE), by its virtue of great surface area (1542.68 m2 /g), regular distribution of pore size (2.95 nm), and excellent stability. Therefore, a simple and high-efficiency dispersive solid phase extraction method based on a spherical COF coupled with high-performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS) was established to determine aryl organophosphate esters in biological samples. This approach displayed favorable linearity in the range of 10.0-1000.0 ng/L (r > 0.9989), a high signal enhancement factor (58.8-181.8 folds) with low limits of detection (0.3-3.3 ng/L). Moreover, it could effectively eliminate complex matrix interference to accurately extract seven aryl organophosphate esters from mouse serum and tissue samples with spiked recoveries of 82.0%-117.4%. The as-synthesized spherical COF has been successfully applied in sample preparation. The dSPE-HPLC-MS/MS method based on a spherical COF has potential application to study the pollutants' metabolism in vivo.

Ultrasensitive detection and efficient removal of mercury ions based on covalent organic framework spheres with double active sites

In present work, a new spherical covalent organic framework (TFPB-APTU COF) with good photoelectric property and double active sites (secondary amine (-NH-) group and sulfur (S) atom) was prepared for ultrasensitive detection and efficient removal of mercury ions (Hg2+). The -NH- group and S atom can capture free Hg2+ by coordination and chelation interaction, and the related steric hindrance effect reduces the photocurrent signal of the TFPB-APTU COF, resulting in the highly sensitive photoelectrochemical analysis of Hg2+ with a wide linear response range (0.01-100000 nM) and low detection limit (0.006 nM). On the other hand, the developed TFPB-APTU COF has large removal capacity (2692 mg g-1), good regeneration capability, and high removal speed for Hg2+ removal based on the double active sites (-NH- group and S atom), large specific surface area and porous spherical structure. The developed TFPB-APTU COF spheres show great potential in monitoring and treatment of environmental pollution of Hg2+.

Rapid Synthesis of Covalent Organic Frameworks with a Controlled Morphology: An Emulsion Polymerization Approach via the Phase Transfer Catalysis Mechanism

Covalent organic frameworks (COFs) with a periodic network of permanent porosity and ordered structures have witnessed enormous potential in many applications. However, the synthesis of COFs with controllable morphologies under mild conditions remains a critical issue. Herein, we report a novel strategy to synthesize β-ketoenamine-linked COFs by emulsion polymerization via phase transfer catalysis for the first time. This new approach employs commercially available pyridinium surfactants as emulsifiers for emulsion polymerization, which function as both catalysts and morphological regulators. By controlling the interfacial interaction in the emulsion, the TpPa-COF can be prepared into different morphologies, i.e., spheres, bowls, and fibers. Furthermore, the COF emulsion can be directly used to prepare a film by applying an electric field, providing a new route to prepare COF films. This phase transfer catalysis method also allows the synthesis of the TpPa-COF on a gram scale. The strategy is fast, facile, and effective in improving the morphology and particle size, providing a prospective route for the green preparation of functional COFs.

Complementary Homogeneous Electrochemical and Photothermal Dual-Modal Sensor for Highly Sensitive Detection of Organophosphorus Pesticides via Stimuli-Responsive COF/Methylene Blue@MnO2 Composite

Credible and on-site detection of organophosphorus pesticides (OPs) in complex matrixes is significant for food security and environmental monitoring. Herein, a novel COF/methylene blue@MnO2 (COF/MB@MnO2) composite featured abundant signal loading, a specific recognition unit, and robust oxidase-like activity was successfully prepared through facile assembly processes. The multifunctional composite acted as a homogeneous electrochemical and photothermal dual-mode sensing platform for OPs detection through stimuli-responsive regulation. Without the presence of OPs, the surface MnO2 coating could recognize thiocholine (TCh), originating from acetylcholinesterase (AChE)-catalyzed hydrolysis of acetylthiocholine (ATCh), and exhibited a distinctly amplified diffusion current due to the release of plentiful MB; while the residual MnO2 nanosheets could only catalyze less TMB into oxidized TMB (oxTMB) with a typical near-infrared (NIR) absorption, enabling NIR-driven photothermal assay with a low temperature using a portable thermometer. Based on the inhibitory effect of OPs on AChE activity and OP-regulated generation of TCh, chlorpyrifos as a model target can be accurately detected with a low limit of detection of 0.0632 and 0.108 ng/mL by complementary electrochemical and photothermal measurements, respectively. The present dual-mode sensor was demonstrated to be excellent for application to the reliable detection of OPs in complex environmental and food samples. This work can not only provide a complementary dual-mode method for convenient and on-site detection of OPs in different scenarios but also expand the application scope of the COF-based multifunctional composite in multimodal sensors.

Urchin-like fluorinated covalent organic frameworks decorated fabric for effective self-cleaning and versatile oil/water separation

Oil contamination and industrial organic pollutants emission have been a serious problem affecting the ecological and residential environment. Membrane-based separation shows great application prospect due to its low-cost, environmental-friendly and easy operation. Therefore, the development of efficient oil-water separation membranes is highly desirable. Herein, a fabric filter with superwettability was prepared by coating urchin-like fluorinated covalent organic frameworks (COFs) on fabric, which was well utilized in filtering immiscible oil-water mixture and surfactant-stabilized water-in-oil emulsion driven only by gravity for the first time. The as-prepared COF fabric filter (defined as fabric@u-FCOF) possessed many outstanding properties, including superhydrophobicity with the water contact angle of approximately 151.6°, satisfactory resistance for alkaline, acidic and saline environments, as well as superior mechanical durability under harsh conditions. Because of the super-micropore of fabric@u-FCOF and the nanopore in the COF coating, the obtained fabric@u-FCOF exhibited excellent performances in terms of separation efficiency and permeability, in which the oil flux was up to 16964 L·m-1·h-2 and separation efficiency for the mixed o-dichlorobenzene/water was higher than 99.4%. In addition, the fabric@u-FCOF also showed excellent self-cleaning performance due to the micro/nano hierarchical structure of its surface. These excellent properties make it an ideal candidate for applications of oil/water separation and water purification.

Assembly of Covalent Organic Frameworks into Colloidal Photonic Crystals

Self-assembly of colloidal particles into ordered superstructures is an important strategy to discover new materials, such as catalysts, plasmonic sensing materials, storage systems, and photonic crystals (PhCs). Here we show that porous covalent organic frameworks (COFs) can be used as colloidal building particles to fabricate porous PhCs with an underlying face-centered cubic (fcc) arrangement. We demonstrate that the Bragg reflection of these can be tuned by controlling the size of the COF particles and that species can be adsorbed within the pores of the COF particles, which in turn alters the Bragg reflection. Given the vast number of existing COFs, with their rich properties and broad modularity, we expect that our discovery will enable the development of colloidal PhCs with unprecedented functionality.

Zwitterionic mesoporous engineering aids peptide-dependent pattern profiling for identification of different liver diseases

Liver disease remains a global health challenge, with its incidence steadily increasing worldwide. Herein, zwitterionic mesoporous engineering was developed for the identification of different liver diseases including liver cirrhosis and liver cancer. Based on this engineering, a total of 2633 m/z signals were observed to be enriched. Notably, three key peptides were identified and showed high accuracy and precision for distinguishing the healthy and disease states, propelling the field of nanomedicine toward genuine personalized medicine.

Boost of Gas Adsorption Kinetics of Covalent Organic Frameworks via Ionic Liquid Solution Process

Adsorption, storage, and conversion of gases (e.g., carbon dioxide, hydrogen, and iodine) are the three critical topics in the field of clean energy and environmental mediation. Exploring new methods to prepare high-performance materials to improve gas adsorption is one of the most concerning topics in recent years. In this work, an ionic liquid solution process (ILSP), which can greatly improve the adsorption kinetic performance of covalent organic framework (COF) materials for gaseous iodine, is explored. Anionic COF TpPaSO3 H is modified by amino-triazolium cation through the ILSP method, which successfully makes the iodine adsorption kinetic performance (K80% rate) of ionic liquid (IL) modified COF AC4 tirmTpPaSO3 quintuple compared with the original COF. A series of experimental characterization and theoretical calculation results show that the improvement of adsorption kinetics is benefited from the increased weak interaction between the COF and iodine, due to the local charge separation of the COF skeleton caused by the substitution of protons by the bulky cations of ILs. This ILSP strategy has competitive help for COF materials in the field of gas adsorption, separation, or conversion, and is expected to expand and improve the application of COF materials in energy and environmental science.