Reductive Electrophotocatalysis: Merging Electricity and Light To Achieve Extreme Reduction Potentials

Modifying Proton Relay into Bioinspired Dye-Based Coordination Polymer for Photocatalytic Proton-Coupled Electron Transfer

Proton-coupled electron transfer (PCET) imparts an energetic advantage over single electron transfer in activating inert substances. Natural PCET enzyme catalysis generally requires tripartite preorganization of proton relay, substrate-bound active center, and redox mediator, making the processes efficient and precluding side reactions. Inspired by this, a heterogeneous photocatalytic PCET system was established to achieve higher PCET driving forces by modifying proton relays into anthraquinone-based anionic coordination polymers. The proximally separated proton relays and photoredox-mediating anthraquinone moiety allowed pre-assembly of inert substrate between them, merging proton and electron into unsaturated bonds by photoreductive PCET, which enhanced reaction kinetics compared with the counter catalyst without proton relay. This photocatalytic PCET method was applied to a broad-scoped reduction of aryl ketones, unsaturated carbonyls, and aromatic compounds. The distinctive regioselectivities for the reduction of isoquinoline derivatives were found to occur on the carbon-ring sides. PCET-generated radical intermediate of quinoline could be trapped by alkene for proton relay-assisted Minisci addition, forming the pharmaceutical aza-acenaphthene scaffold within one step. When using heteroatom(X)-H/C-H compounds as proton-electron donors, this protocol could activate these inert bonds through photooxidative PCET to afford radicals and trap them by electron-deficient unsaturated compounds, furnishing the direct X-H/C-H functionalization.

Photoinduced Single Electron Reduction of the 4-O-5 Linkage in Lignin Models for C-P Coupling Catalyzed by Bifunctional N-Heterocyclic Carbenes

Catalytic activation of Caryl-O bonds is considered as a powerful strategy for the production of aromatics from lignin. However, due to the high reduction potentials of diaryl ether 4-O-5 linkage models, their single electron reduction remains a daunting challenge. This study presents the blue light-induced bifunctional N-heterocyclic carbene (NHC)-catalyzed one-electron reduction of diaryl ether 4-O-5 linkage models for the synthesis of trivalent phosphines. The H-bond between the newly devised bifunctional NHC and diaryl ethers is responsible for the success of the single electron transfer. Furthermore, this approach demonstrates selective one-electron reduction of unsymmetric diaryl ethers, oligomeric phenylene oxide, and lignin model.

Reductive Cyclopropanation through Bismuth Photocatalysis

We present here a catalytic method based on a low-valent Bi complex capable of cyclopropanation of double bonds under blue LED irradiation. The catalysis features various unusual Bi-based organometallic steps, namely, (1) two-electron inner sphere oxidative addition of Bi(I) complex to CH2I2, (2) light-induced homolysis of the Bi(III)-CH2I bond, (3) subsequent iodine abstraction-ring-closing, and (4) reduction of Bi(III) to Bi(I) with an external reducing agent to close the cycle. Stoichiometric organometallic experiments support the proposed mechanism. This protocol represents a unique example of a reductive photocatalytic process based on low-valent bismuth radical catalysis.

Pushing the Limits of Organometallic Redox Chemistry with an Isolable Mn(-I) Dianion

We report an incredibly reducing and redox-active Mn-I dianion, [Mn(CO)3(Ph2B(tBuNHC)2)]2- (NHC = N-heterocyclic carbene), furnished via 2e- reduction of the parent 16e- MnI complex with Na0 or K0. Cyclic voltammograms show a Mn0/-I redox couple at -3.13 V vs Fc+/0 in tetrahydrofuran (THF), -3.06 V in 1,2-dimethoxyethane, and -2.85 V in acetonitrile. The diamagnetic Mn-I dianion is stable in solution and solid-state at room temperature, tolerating a wide range of countercations ([M(2.2.2)crypt]+, [M(18-crown-6)]+, [nBu4N]+; M = Na, K). Countercation identity does not significantly alter 13C NMR spectral signatures with [nBu4N]+ and Na+, suggesting minimal ion pairing in solution. IR spectroscopy reveals a significant decrease in CO stretching frequencies from MnI to Mn-I (ca. 240 cm-1), consistent with a drastic increase in electron density at Mn. State-of-the-art DFT calculations are in excellent agreement with the observed IR spectral data. Moreover, the Mn-I dianion behaves as a chemical reductant, smoothly releasing 1e- or 2e- to regenerate the oxidized Mn0 or MnI species in solution. The reducing potential of [Mn(CO)3(Ph2B(tBuNHC)2)]2- surpasses the naphthalenide anion in THF (-3.09 V) and represents one of the strongest isolable chemical redox agents.

Synergistic use of photocatalysis and convergent paired electrolysis for nickel-catalyzed arylation of cyclic alcohols

The merging of transition metal catalysis with electrochemistry has become a powerful tool for organic synthesis because catalysts can govern the reactivity and selectivity. However, coupling catalysts with alkyl radical species generated by anodic oxidation remains challenging because of electrode passivation, dimerization, and overoxidation. In this study, we developed convergent paired electrolysis for the coupling of nickel catalysts with alkyl radicals derived from photoinduced ligand-to-metal charge-transfer of cyclic alcohols and iron catalysts, providing a practical method for site-specific and remote arylation of ketones. The synergistic use of photocatalysis with convergent paired electrolysis can provide alternative avenues for metal-catalyzed radical coupling reactions.

Electrophotocatalysis Versus Indirect Electrolysis: Electrochemical Selenocyclization of 3-Aza-1,5-dienes Facilitated by Energy Transfer, Direct Photolysis or N-Hydroxyphthalimide

Three hybrid electrochemical protocols, which involve the energy transfer, direct photolysis and N-hydroxyphthalimide catalyst, respectively, are presented for the selenylation/cyclization of the fragile substrates of 3-aza-1,5-dienes with diorganyl diselenides to afford 3-selenomethyl-4-pyrrolin-2-ones. The two electrophotocatalytic reactions and the indirect electrolysis one are both regioselective and external-oxidant- and transition-metal-free, and are associated with a broad substrate scope and high Se-economy, and all three methods are amenable to gram-scale syntheses, late-stage functionalizations, sunlight-induced experiments and all-solar-driven syntheses.

Photoelectrochemical Fe/Ni cocatalyzed C-C functionalization of alcohols

The simultaneous activation of reactants on the anode and cathode via paired electrocatalysis has not been extensively demonstrated. This report presents a paired oxidative and reductive catalysis based on earth-abundant iron/nickel cocatalyzed C-C functionalization of ubiquitous alcohols. A variety of alcohols (i.e., primary, secondary, tertiary, or unstrained cyclic alcohols) can be activated at very low oxidation potential of (~0.30 V vs. Ag/AgCl) via photoelectrocatalysis coupled with versatile electrophiles. This reactivity yields a wide range of structurally diverse molecules with broad functional group compatibility (more than 50 examples).

Organic Donor-Acceptor Thermally Activated Delayed Fluorescence Photocatalysts in the Photoinduced Dehalogenation of Aryl Halides

We report a family of donor-acceptor thermally activated delayed fluorescent (TADF) compounds based on derivatives of DMAC-TRZ, that are strongly photoreducing. Both Eox and thus E*ox could be tuned via substitution of the DMAC donor with a Hammett series of p-substituted phenyl moieties while Ered remained effectively constant. These compounds were assessed in the photoinduced dehalogenation of aryl halides, and analogues bearing electron withdrawing groups were found to produce the highest yields. Substrates of up to Ered=-2.72 V could be dehalogenated at low PC loading (1 mol %) and under air, conditions much milder than previously reported for this reaction. Spectroscopic and chemical studies demonstrate that all PCs, including literature reference PCs, photodegrade, and that it is these photodegradation products that are responsible for the reactivity.

Transition-metal-catalyst-free electroreductive alkene hydroarylation with aryl halides under visible-light irradiation

The radical hydroarylation of alkenes is an efficient strategy for accessing linear alkylarenes with high regioselectivity. Herein, we report the electroreductive hydroarylation of electron-deficient alkenes and styrene derivatives using (hetero)aryl halides under mild reaction conditions. Notably, the present hydroarylation proceeded with high efficiency under transition-metal-catalyst-free conditions. The key to success is the use of 1,3-dicyanobenzene as a redox mediator and visible-light irradiation, which effectively suppresses the formation of simple reduction, i.e., hydrodehalogenation, products to afford the desired products in good to high yields. Mechanistic investigations proposed that a reductive radical-polar crossover pathway is likely to be involved in this transformation.

Picosecond reactions of excited radical ion super-reductants

Classical photochemistry requires nanosecond excited-state lifetimes for diffusion-controlled reactions. Excited radicals with picosecond lifetimes have been implied by numerous photoredox studies, and controversy has arisen as to whether they can actually be catalytically active. We provide direct evidence for the elusive pre-association between radical ions and substrate molecules, enabling photoinduced electron transfer beyond the diffusion limit. A strategy based on two distinct light absorbers, mimicking the natural photosystems I and II, is used to generate excited radicals, unleashing extreme reduction power and activating C(sp2)-Cl and C(sp2)-F bonds. Our findings provide a long-sought mechanistic understanding for many previous synthetically-oriented works and permit more rational future photoredox reaction development. The newly developed excitation strategy pushes the current limits of reactions based on multi-photon excitation and very short-lived but highly redox active species.

Electroreductive Arylcarboxylation of Styrenes with CO2 and Aryl Halides via a Radical-Polar Crossover Mechanism

2,3-Diaryl propanoic acids are important structures as a result of their widespread presence in numerous bioactive compounds. However, the limitations of existing synthetic techniques include the requirement for costly catalysts and limited substrates. Here, we developed a novel electroreductive arylcarboxylation of alkenes with CO2 based on a radical-polar crossover pathway assisted by easily accessible dimethyl terephthalate as a reductive mediator. This method will provide an efficient strategy for the synthesis of 2,3-diarylpropanoic acids.

Host-Guest Approach to Promoting Photocatalysis Based on Consecutive Photo-Induced Electron-Transfer Processes via Efficient Förster Resonance Energy Transfer

Supramolecular artificial light-harvesting system with highly efficient host-guest energy transfer pathway provides an ideal platform for optimizing the photochemistry process. The consecutive photo-induced electron transfer (conPET) process overcomes the energy limitation of visible-light photocatalysis, but is often compromised by mismatching between the absorption of ground state dye and its radical, weakening the efficiency of photoredox reaction. By encapsulating a conPET photocatalyst rhodamine 6G into metal-organic cage, the supramolecular approach was undertaken to tackle the intrinsic difficulty of matching the light absorption of photoexcitation between rhodamine 6G and its radical. The highly efficient Förster resonance energy transfer from the photoexcited cage to rhodamine 6G forced by host-guest encapsulation facilitates the conPET process for the single-wavelength light-driven activation of aryl halides by stabilizing and accelerating the production and accumulation of the rhodamine 6G radical intermediate. The tunable and flexible nature of the supramolecular host-guest complex renders the cage-based encapsulation strategy promising for the development of ideal photocatalysts toward the better utilization of solar energy.

Organocatalyzed Photoelectrochemistry for the Generation of Acyl and Phosphoryl Radicals through Hydrogen Atom-Transfer Process

An organocatalyzed photoelectrochemical method for the generation of acyl and phosphoryl radicals from formamides, aldehydes, and phosphine oxides has been developed. This protocol utilizes 9,10-phenanthrenequinone (PQ) as both a molecular catalyst and a hydrogen atom-transfer (HAT) reagent, eliminating the requirement for external metal-based reagents, HAT reagents, and oxidants. The generated acyl radicals can be applied to a range of radical-mediated transformation reactions, including C-H carbamoylation of heteroarenes, intermolecular tandem radical cyclization of CF3-substituted N-arylacrylamides, as well as intramolecular cyclization reactions. The use of acyl radicals in these transformations offers an efficient and sustainable approach to accessing structurally diverse carbonyl compounds.

A guide to troubleshooting metal sacrificial anodes for organic electrosynthesis

The development of reductive electrosynthetic reactions is often enabled by the oxidation of a sacrificial metal anode, which charge-balances the reductive reaction of interest occurring at the cathode. The metal oxidation is frequently assumed to be straightforward and innocent relative to the chemistry of interest, but several processes can interfere with ideal sacrificial anode behavior, thereby limiting the success of reductive electrosynthetic reactions. These issues are compounded by a lack of reported observations and characterization of the anodes themselves, even when a failure at the anode is observed. Here, we weave lessons from electrochemistry, interfacial characterization, and organic synthesis to share strategies for overcoming issues related to sacrificial anodes in electrosynthesis. We highlight common but underexplored challenges with sacrificial anodes that cause reactions to fail, including detrimental side reactions between the anode or its cations and the components of the organic reaction, passivation of the anode surface by an insulating native surface film, accumulation of insulating byproducts at the anode surface during the reaction, and competitive reduction of sacrificial metal cations at the cathode. For each case, we propose experiments to diagnose and characterize the anode and explore troubleshooting strategies to overcome the challenge. We conclude by highlighting open questions in the field of sacrificial-anode-driven electrosynthesis and by indicating alternatives to traditional sacrificial anodes that could streamline reaction optimization.

Iron(III) Carbene Complexes with Tunable Excited State Energies for Photoredox and Upconversion

Substituting precious elements in luminophores and photocatalysts by abundant first-row transition metals remains a significant challenge, and iron continues to be particularly attractive owing to its high natural abundance and low cost. Most iron complexes known to date face severe limitations due to undesirably efficient deactivation of luminescent and photoredox-active excited states. Two new iron(III) complexes with structurally simple chelate ligands enable straightforward tuning of ground and excited state properties, contrasting recent examples, in which chemical modification had a minor impact. Crude samples feature two luminescence bands strongly reminiscent of a recent iron(III) complex, in which this observation was attributed to dual luminescence, but in our case, there is clear-cut evidence that the higher-energy luminescence stems from an impurity and only the red photoluminescence from a doublet ligand-to-metal charge transfer (2LMCT) excited state is genuine. Photoinduced oxidative and reductive electron transfer reactions with methyl viologen and 10-methylphenothiazine occur with nearly diffusion-limited kinetics. Photocatalytic reactions not previously reported for this compound class, in particular the C-H arylation of diazonium salts and the aerobic hydroxylation of boronic acids, were achieved with low-energy red light excitation. Doublet-triplet energy transfer (DTET) from the luminescent 2LMCT state to an anthracene annihilator permits the proof of principle for triplet-triplet annihilation upconversion based on a molecular iron photosensitizer. These findings are relevant for the development of iron complexes featuring photophysical and photochemical properties competitive with noble-metal-based compounds.

1,4-Aminoarylation of Butadienes via Photoinduced Palladium Catalysis

A visible-light-induced, three-component palladium-catalyzed 1,4-aminoarylation of butadienes with readily available aryl halides and aliphatic amines has been developed, affording allylamines with excellent E-selectivity. The reaction exhibits exceptional control over chemo-, regio-, and stereoselectivity, a broad substrate scope, and high functional group compatibility, as demonstrated by the late-stage functionalization of bioactive molecules. Mechanistic investigations are consistent with a photoinduced radical Pd(0)-Pd(I)-Pd(II)-Pd(0) Heck-Tsuji-Trost allylation cascade.

Unveiling Three Interconvertible Redox States of Boraphenalene

Neutral 1-boraphenalene displays the isoelectronic structure of the phenalenyl carbocation and is expected to behave as an attractive organoboron multi-redox system. However, the isolation of new redox states have remained elusive even though the preparation of neutral boron(III)-containing phenalene compounds have been extensively studied. Herein, we have adopted an N-heterocyclic carbene ligand stabilization approach to achieve the first isolation of the stable and ambipolar 1-boraphenalenyl radical 1•. The 1-boraphenalenyl cation 1+ and anion 1- have also been electrochemically observed and chemically isolated, representing new redox forms of boraphenalene for the study of non-Kekulé polynuclear benzenoid molecules. Experimental and theoretical investigations suggest that the interconvertible three-redox-state species undergo reversible electronic structure modifications, which primarily take place on the polycyclic framework of the molecules, exhibiting atypical behavior compared to known donor-stabilized organoboron compounds. Initial reactivity studies, aromaticity evaluations, and photophysical studies show redox-state-dependent trends. While 1+ is luminescent in both the solution and solid states, 1• exhibits boron-centered reactivity and 1- undergoes substitution chemistry on the boraphenalenyl skeleton and serves as a single-electron transfer reductant.

Electrochemical C-H/C-C Bond Oxygenation: A Potential Technology for Plastic Depolymerization

Herein, we provide eco-friendly and safely operated electrocatalytic methods for the selective oxidation directly or with water, air, light, metal catalyst or other mediators serving as the only oxygen supply. Heavy metals, stoichiometric chemical oxidants, or harsh conditions were drawbacks of earlier oxidative cleavage techniques. It has recently come to light that a crucial stage in the deconstruction of plastic waste and the utilization of biomass is the selective activation of inert C(sp3 )-C/H(sp3 ) bonds, which continues to be a significant obstacle in the chemical upcycling of resistant polyolefin waste. An appealing alternative to chemical oxidations using oxygen and catalysts is direct or indirect electrochemical conversion. An essential transition in the chemical and pharmaceutical industries is the electrochemical oxidation of C-H/C-C bonds. In this review, we discuss cutting-edge approaches to chemically recycle commercial plastics and feasible C-C/C-H bonds oxygenation routes for industrial scale-up.

Electrophotocatalytic hydrogenation of imines and reductive functionalization of aryl halides

The open-shell catalytically active species, like radical cations or radical anions, generated by one-electron transfer of precatalysts are widely used in energy-consuming redox reactions, but their excited-state lifetimes are usually short. Here, a closed-shell thioxanthone-hydrogen anion species (3), which can be photochemically converted to a potent and long-lived reductant, is generated under electrochemical conditions, enabling the electrophotocatalytic hydrogenation. Notably, TfOH can regulate the redox potential of the active species in this system. In the presence of TfOH, precatalyst (1) reduction can occur at low potential, so that competitive H2 evolution can be inhibited, thus effectively promoting the hydrogenation of imines. In the absence of TfOH, the reducing ability of the system can reach a potency even comparable to that of Na0 or Li0, thereby allowing the hydrogenation, borylation, stannylation and (hetero)arylation of aryl halides to construct C-H, C-B, C-Sn, and C-C bonds.

Photo- and electro-chemical strategies for the activations of strong chemical bonds

The employment of light and/or electricity - alternatively to conventional thermal energy - unlocks new reactivity paradigms as tools for chemical substrate activations. This leads to the development of new synthetic reactions and a vast expansion of chemical spaces. This review summarizes recent developments in photo- and/or electrochemical activation strategies for the functionalization of strong bonds - particularly carbon-heteroatom (C-X) bonds - via: (1) direct photoexcitation by high energy UV light; (2) activation via photoredox catalysis under irradiation with relatively lower energy UVA or blue light; (3) electrochemical reduction; (4) combination of photocatalysis and electrochemistry. Based on the types of the targeted C-X bonds, various transformations ranging from hydrodefunctionalization to cross-coupling are covered with detailed discussions of their reaction mechanisms.

Accelerated Electrophotocatalytic C(sp3 )-H Heteroarylation Enabled by an Efficient Continuous-Flow Reactor

Electrophotocatalytic transformations are garnering attention in organic synthesis, particularly for accessing reactive intermediates under mild conditions. Moving these methodologies to continuous-flow systems, or flow ElectroPhotoCatalysis (f-EPC), showcases potential for scalable processes due to enhanced irradiation, increased electrode surface, and improved mixing of the reaction mixture. Traditional methods sequentially link photochemical and electrochemical reactions, using flow reactors connected in series, yet struggle to accommodate reactive transient species. In this study, we introduce a new flow reactor concept for electrophotocatalysis (EPC) that simultaneously utilizes photons and electrons. The reactor is designed with a transparent electrode and employs cost-effective materials. We used this technology to develop an efficient process for electrophotocatalytic heteroarylation of C(sp3 )-H bonds. Importantly, the same setup can also facilitate purely electrochemical and photochemical transformations. This reactor represents a significant advancement in electrophotocatalysis, providing a framework for its application in flow for complex synthetic transformations.

Improved transition metal photosensitizers to drive advances in photocatalysis

To function effectively in a photocatalytic application, a photosensitizer's light absorption, excited-state lifetime, and redox potentials, both in the ground state and excited state, are critically important. The absorption profile is particularly relevant to applications involving solar harvesting, whereas the redox potentials and excited-state lifetimes determine the thermodynamics, kinetics, and quantum yields of photoinduced redox processes. This perspective article focuses on synthetic inorganic and organometallic approaches to optimize these three characteristics of transition-metal based photosensitizers. We include our own work in these areas, which has focused extensively on exceptionally strong cyclometalated iridium photoreductants that enable challenging reductive photoredox transformations on organic substrates, and more recent work which has led to improved solar harvesting in charge-transfer copper(i) chromophores, an emerging class of earth-abundant compounds particularly relevant to solar-energy applications. We also extensively highlight many other complementary strategies for optimizing these parameters and highlight representative examples from the recent literature. It remains a significant challenge to simultaneously optimize all three of these parameters at once, since improvements in one often come at the detriment of the others. These inherent trade-offs and approaches to obviate or circumvent them are discussed throughout.

Selective C(sp3)-H arylation/alkylation of alkanes enabled by paired electrocatalysis

We report a combination of electrocatalysis and photoredox catalysis to perform selective C(sp3)-H arylation/alkylation of alkanes, in which a binary catalytic system based on earth-abundant iron and nickel is applied. Reaction selectivity between two-component C(sp3)-H arylation and three-component C(sp3)-H alkylation is tuned by modulating the applied current and light source. Importantly, an ultra-low anodic potential (~0.23 V vs. Ag/AgCl) is applied in this protocol, thus enabling compatibility with a variety of functional groups (>70 examples). The robustness of the method is further demonstrated on a preparative scale and applied to late-stage diversification of natural products and pharmaceutical derivatives.

Reductive Activation of Aryl Chlorides by Tuning the Radical Cation Properties of N-Phenylphenothiazines as Organophotoredox Catalysts

Aryl chlorides as substrates for arylations present a particular challenge for photoredox catalytic activation due to their strong C(sp2 )-Cl bond and their strong reduction potential. Electron-rich N-phenylphenothiazines, as organophotoredox catalysts, are capable of cleaving aryl chlorides simply by photoinduced electron transfer without the need for an additional electrochemical activation setup or any other advanced photocatalysis technique. Due to the extremely strong reduction potential in the excited state of the N-phenylphenothiazines the substrate scope is high and includes aryl chlorides both with electron-withdrawing and electron-donating substituents. We evidence this reactivity for photocatalytic borylations and phosphonylations. Advanced time-resolved transient absorption spectroscopy in combination with electrochemistry was the key to elucidating and comparing the unusual photophysical properties not only of the N-phenylphenothiazines, but also of their cation radicals as the central intermediates in the photocatalytic cycle. The revealed photophysics allowed the excited-state and radical-cation properties to be fine-tuned by the molecular design of the N-phenylphenothiazines; this improved the photocatalytic activity.

Isolation of the elusive [Ru(bipy)3]+: a key intermediate in photoredox catalysis

Photoredox catalysis has flourished in recent years, but due to its widespread utility applications have grown faster than mechanistic understanding. In this report we help to address this deficit by isolating and characterising one of the intermediates of the iconic photocatalyst [Ru(bipy)3]2+, and testing its initial photoreactivity towards common substrates.

Electrochemical chemoselective hydrogenation of 1,4-enediones with HFIP as the hydrogen donor: scalable access to 1,4-diketones

A straightforward electrochemical protocol for efficient hydrogenation of unsaturated CC bonds has been reported in an undivided cell. A series of versatile 1,4-diketones are smoothly generated under metal-free and external-reductant-free electrolytic conditions. Moreover, the tolerance of various functional groups and decagram-scale experiments have shown the practicability and potential applications of this methodology. Moreover, a range of heterocyclic compounds were easily prepared through follow-up procedures of 1,4-diketones.

Electroreductive Cross-Electrophile Coupling (eXEC) Reactions

Electrochemistry utilizes electrons as a potent, controllable, and traceless alternative to chemical oxidants or reductants, and typically offers a more sustainable option for achieving selective organic synthesis. Recently, the merger of electrochemistry with readily available electrophiles has been recognized as a viable and increasingly popular methodology for efficiently constructing challenging C-C and C-heteroatom bonds in a sustainable manner for complex organic molecules. In this mini-review, we have systematically summarized the most recent advances in electroreductive cross-electrophile coupling (eXEC) reactions during the last decade. Our focus has been on readily available electrophiles, including aryl and alkyl organic (pseudo)halides, as well as small molecules such as CO2 , SO2 , and D2 O.

Harnessing Radicals in Confined Supramolecular Environments Made Possible by MOFs

Researching and utilizing radical intermediates in organic synthetic chemistry have innovated discoveries in methodology and theory. Reactions concerning free radical species opened new pathways beyond the frame of the two-electron mechanism while commonly characterized as rampant processes lacking selectivity. As a result, research in this field has always focused on the controllable generation of radical species and determining factors of selectivity. Metal-organic frameworks (MOFs) have emerged as compelling candidates as catalysts in radical chemistry. From a catalytic point of view, the porous nature of MOFs entails an inner phase for the reaction that could offer possibilities for the regulation of reactivity and selectivity. From a material science perspecti ve, MOFs are organic-inorganic hybrid materials that integrate functional units in organic compounds and complex forms in the tunable long-ranged periodic structure. In this account, we summarized our progress in the application of MOFs in radical chemistry in three parts: (1) The generation of radical species; (2) The weak interactions and site selectivity; (3) Regio- and stereo-selectivity. The unique role of MOFs play in these paradigms is demonstrated in a supramolecular narrative through the analyses of the multi-constituent collaboration within the MOF and the interactions between MOFs and the intermediates during the reactions.

Super-Reducing Behavior of Benzo[b]phenothiazine Anion Under Visible-Light Photoredox Condition

Herein we describe the anion of benzo[b]phenothiazine as a super reductant species upon excitation by visible light. In contrary to N-substituted phenothiazines or benzophenothiazines, this molecule holds extreme reducing power to promote single electron transfer-based reductive cleavage at a potential of -3.51 V vs SCE. As a proof, a plethora of aryl chloride substrates have been reductively cleaved to fabricate molecules of the class isoindolinone and oxindole. Moreover, an aryl-chloride bond has been homolytically cleaved to generate aryl radicals that have been utilized for C-C cross-coupling or C-P bond formation reactions. To prove its extreme reducing ability, some of the aryl fluoride bonds have been cleaved to generate aryl radicals. A detailed photophysical study including steady-state and time-resolved spectroscopic techniques explain the molecule's behavior upon light excitation, and that correlates with its reactivity pattern. Theoretical calculations disclose the benzophenothiazine anion to be slightly puckered at the ground state as the molecule is antiaromatic in nature. In contrast, the excited-state geometry is planar, which is also close to that of the intermediate after one electron transfer. Abating the antiaromaticity of the anionic species is partially responsible for its highly reducing behavior.

Photoelectrochemical oxidative C(sp3)-H borylation of unactivated hydrocarbons

Organoboron compounds are of high significance in organic synthesis due to the unique versatility of boryl substituents to access further modifications. The high demand for the incorporation of boryl moieties into molecular structures has witnessed significant progress, particularly in the C(sp3)-H borylation of hydrocarbons. Taking advantage of special characteristics of photo/electrochemistry, we herein describe the development of an oxidative C(sp3)-H borylation reaction under metal- and oxidant-free conditions, enabled by photoelectrochemical strategy. The reaction exhibits broad substrate scope (>57 examples), and includes the use of simple alkanes, halides, silanes, ketones, esters and nitriles as viable substrates. Notably, unconventional regioselectivity of C(sp3)-H borylation is achieved, with the coupling site of C(sp3)-H borylation selectively located in the distal methyl group. Our method is operationally simple and easily scalable, and offers a feasible approach for the one-step synthesis of high-value organoboron building blocks from simple hydrocarbons, which would provide ample opportunities for drug discovery.

Electrochemical Late-Stage Functionalization

Late-stage functionalization (LSF) constitutes a powerful strategy for the assembly or diversification of novel molecular entities with improved physicochemical or biological activities. LSF can thus greatly accelerate the development of medicinally relevant compounds, crop protecting agents, and functional materials. Electrochemical molecular synthesis has emerged as an environmentally friendly platform for the transformation of organic compounds. Over the past decade, electrochemical late-stage functionalization (eLSF) has gained major momentum, which is summarized herein up to February 2023.

Electroreductive Radical Borylation of Unactivated (Hetero)Aryl Chlorides Without Light by Using Cumulene-Based Redox Mediators

Single-electron transfer (SET) plays a critical role in many chemical processes, from organic synthesis to environmental remediation. However, the selective reduction of inert substrates (Ep/2 <-2 V vs Fc/Fc+ ), such as ubiquitous electron-neutral and electron-rich (hetero)aryl chlorides, remains a major challenge. Current approaches largely rely on catalyst photoexcitation to reach the necessary deeply reducing potentials or suffer from limited substrate scopes. Herein, we demonstrate that cumulenes-organic molecules with multiple consecutive double bonds-can function as catalytic redox mediators for the electroreductive radical borylation of (hetero)aryl chlorides at relatively mild cathodic potentials (approximately -1.9 V vs. Ag/AgCl) without the need for photoirradiation. Electrochemical, spectroscopic, and computational studies support that step-wise electron transfer from reduced cumulenes to electron-neutral chloroarenes is followed by thermodynamically favorable mesolytic cleavage of the aryl radical anion to generate the desired aryl radical intermediate. Our findings will guide the development of other sustainable, purely electroreductive radical transformations of inert molecules using organic redox mediators.

Organoelectrophotocatalytic Generation of Acyl Radicals from Formamides and Aldehydes: Access to Acylated 3-CF3-2-Oxindoles

Organoelectrophotocatalytic generation of acyl radicals from formamides and aldehydes to synthesize acylated 3-CF3-2-oxindoles has been developed. This protocol features a monocatalytic system using 9,10-phenanthrenequinone (PQ) both as a catalyst and as a hydrogen atom transfer (HAT) reagent, which avoids the use of an external HAT reagent, metal reagent, and oxidant. A variety of acylated 3-CF3-2-oxindoles have been obtained in satisfactory yields from CF3-substituted N-arylacrylamides via a tandem radical cyclization.

Ketyl Radical Coupling Enabled by Polycyclic Aromatic Hydrocarbon Electrophotocatalysts

Herein, we report a new class of electrophotocatalysts, polycyclic aromatic hydrocarbons, that promote the reduction of unactivated carbonyl compounds to generate versatile ketyl radical intermediates. This catalytic platform enables previously challenging intermolecular ketyl radical coupling reactions, including those that classic reductants (e.g., SmI2/HMPA) have failed to promote. More broadly, this study outlines an approach to fundamentally expand the array of reactive radical intermediates that can be generated via electrophotocatalysis by obviating the need for rapid mesolytic cleavage following substrate reduction.

Reductive photoredox transformations of carbonyl derivatives enabled by strongly reducing photosensitizers

Visible-light photoredox catalysis is well-established as a powerful and versatile organic synthesis strategy. However, some substrate classes, despite being attractive precursors, are recalcitrant to single-electron redox chemistry and thus not very amenable to photoredox approaches. Among these are carbonyl derivatives, e.g. ketones, aldehydes, and imines, which in most cases require Lewis or Brønsted acidic additives to activate via photoinduced electron transfer. In this work, we unveil a range of photoredox transformations on ketones and imines, enabled by strongly reducing photosensitizers and operating under simple, general conditions with a single sacrificial reductant and no additives. Specific reactions described here are umpolung C-C bond forming reactions between aromatic ketones or imines and electron-poor alkenes, imino-pinacol homocoupling reactions of challenging alkyl-aryl imine substrates, and γ-lactonization reactions of aromatic ketones with methyl acrylate. The reactions are all initiated by photoinduced electron transfer to form a ketyl or iminyl that is subsequently trapped.

Photoelectrochemical Asymmetric Catalysis Enables Enantioselective Heteroarylcyanation of Alkenes via C-H Functionalization

The asymmetric difunctionalization of alkenes, a method transforming readily accessible alkenes into enantioenriched chiral structures of high value, has long been a focal point of organic synthesis. Despite tremendous efforts in this domain, it remains a considerable challenge to devise enantioselective oxidative dicarbofunctionalization of alkenes, even though these transformations can utilize stable and unfunctionalized functional group donors. In this context, we report herein a photoelectrocatalytic method for the enantioselective heteroarylcyanation of aryl alkenes, which employs unfunctionalized heteroarenes through C-H functionalization. The photoelectrochemical asymmetric catalysis (PEAC) method combines photoredox catalysis and asymmetric electrocatalysis to facilitate the formation of two C-C bonds operating via hydrogen (H2) evolution and obviating the need for external chemical oxidants.

Photoredox catalysis harvesting multiple photon or electrochemical energies

Photoredox catalysis (PRC) is a cutting-edge frontier for single electron-transfer (SET) reactions, enabling the generation of reactive intermediates for both oxidative and reductive processes via photon activation of a catalyst. Although this represents a significant step towards chemoselective and, more generally, sustainable chemistry, its efficacy is limited by the energy of visible light photons. Nowadays, excellent alternative conditions are available to overcome these limitations, harvesting two different but correlated concepts: the use of multi-photon processes such as consecutive photoinduced electron transfer (conPET) and the combination of photo- and electrochemistry in synthetic photoelectrochemistry (PEC). Herein, we review the most recent contributions to these fields in both oxidative and reductive activations of organic functional groups. New opportunities for organic chemists are captured, such as selective reactions employing super-oxidants and super-reductants to engage unactivated chemical feedstocks, and scalability up to gram scales in continuous flow. This review provides comparisons between the two techniques (multi-photon photoredox catalysis and PEC) to help the reader to fully understand their similarities, differences and potential applications and to therefore choose which method is the most appropriate for a given reaction, scale and purpose of a project.

Reductive Arylation of Nitroarenes with Chloroarenes: Reducing Conditions Enable New Reactivity from Palladium Catalysts

Palladium-catalyzed C-N bond forming reactions are a key tool in modern synthetic organic chemistry. Despite advances in catalyst design enabling the use of a variety of aryl (pseudo)halides, the necessary aniline coupling partner is often synthesized in a discrete reduction step from a nitroarene. An ideal synthetic sequence would avoid the necessity of this step while maintaining the reliable reactivity of palladium catalysis. Herein, we describe how reducing conditions enable new chemical steps and reactivity from well-studied palladium catalysts, resulting in a new, useful transformation: the reductive arylation of nitroarenes with chloroarenes to form diarylamines. Mechanistic experiments suggest that under reducing conditions, BrettPhos-palladium complexes catalyze the dual N-arylation of typically inert azoarenes─generated via the in situ reduction of nitroarenes─via two distinct mechanisms. Initial N-arylation proceeds via a novel association-reductive palladation sequence followed by reductive elimination to yield an intermediate 1,1,2-triarylhydrazine. Arylation of this intermediate by the same catalyst via a traditional amine arylation sequence forms a transient tetraarylhydrazine, unlocking reductive N-N bond cleavage to liberate the desired product. The resulting reaction allows for the synthesis of diarylamines bearing a variety of synthetically valuable functionalities and heteroaryl cores in high yield.

Shining Fresh Light on Complex Photoredox Mechanisms through Isolation of Intermediate Radical Anions

Photoredox catalysis (PRC) has gained enormous and wide-ranging interest in recent years but has also been subject to significant mechanistic uncertainty, even controversy. To provide a method by which the missing understanding can begin to be filled in, we demonstrate herein that it is possible to isolate as authentic materials the one-electron reduction products of representative PRC catalysts (PCs). Specifically, KC₈ reduction of both 9,10-dicyanoanthracene and a naphthalene monoamide derivative in the presence of a cryptand provides convenient access to the corresponding [K(crypt)⁺][PC^·-] salts as clean materials that can be fully characterized by techniques including EPR and XRD. Because PC^·- states are key intermediates in PRC reactions, such isolation allows for highly controlled study of these anions' specific reactivity and hence their mechanistic roles. As a demonstration of this principle, we show that these salts can be used to conveniently interrogate the mechanisms of recent, high-profile "conPET" and "e-PRC" reactions, which are currently the subject of both significant interest and acute controversy. Using very simple experiments, we are able to provide striking insights into these reactions' underlying mechanisms and to observe surprising levels of hidden complexity that would otherwise have been very challenging to identify and that emphasize the care and control that are needed when interrogating and interpreting PRC mechanisms. These studies provide a foundation for the study of a far broader range of questions around conPET, e-PRC, and other PRC reaction mechanisms in the future, using the same strategy of PC^·- isolation.

Advancing electrocatalytic nitrogen fixation: insights from molecular systems

Nitrogen fixation has a rich history within the inorganic chemistry community. In recent years attention has (re)focused on developing electrocatalytic systems capable of mediating the nitrogen reduction reaction (N2RR). Well-defined molecular catalyst systems have much to offer in this context. This personal perspective summarizes recent progress from our laboratory at Caltech, pulling together lessons learned from a number of studies we have conducted, placing them within the broader context of thermodynamic efficiency and selectivity for the N2RR. In particular, proton-coupled electron transfer (PCET) provides an attractive strategy to achieve enhanced efficiency for the multi-electron/proton reduction of N2 to produce NH3 (or NH4+), and electrocatalytic PCET (ePCET) via an ePCET mediator affords a promising means of mitigating HER such that the N2RR can be achieved in a catalytic fashion.

Switchable Direct Oxygenative Arylation of C(sp3)-H Bonds via Electrophotocatalysis

A metal-free electrophotochemical C(sp3)-H arylation was developed under mild conditions. This method enables a switchable synthesis of diaryl alcohols and diaryl alkanes from inactive benzylic carbons. More importantly, a cheap and safe mediator N-chlorosuccinimide (NCS) was developed, which was employed for the hydrogen atom transfer (HAT) process of the benzylic C-H bond. In addition, this active radical was captured and identified by electron paramagnetic resonance (EPR).

Manipulation of an electron by photoirradiation in the electron-catalyzed cross-coupling reaction

An electron has recently been shown to catalyze the cross-coupling reaction of organometallic compounds with aryl halides. In terms of green and sustainable chemistry, the electron catalysis is much more desirable than the inevitably used transition metal catalysis but a high temperature of more than 100°C is required to achieve it. Here, we disclose that visible light photoirradiation accelerates the electron-catalyzed reaction of arylzinc reagents with aryl halides with the aid of a photoredox catalysis. Photoexcitation of a photoredox catalyst and an anion radical intermediate respectively affects the supply and transfer of the electron catalyst, promoting the cross-coupling reaction to proceed at room temperature. The supply of the electron catalyst by the photoredox catalysis makes the scope of aryl halides wider.

Practical and General Alcohol Deoxygenation Protocol

Herein, we describe a practical protocol for the removal of alcohol functional groups through reductive cleavage of their benzoate ester analogs. This transformation requires a strong single electron transfer (SET) reductant and a means to accelerate slow fragmentation following substrate reduction. To accomplish this, we developed a photocatalytic system that generates a potent reductant from formate salts alongside Brønsted or Lewis acids that promote fragmentation of the reduced intermediate. This deoxygenation procedure is effective across structurally and electronically diverse alcohols and enables a variety of difficult net transformations. This protocol requires no precautions to exclude air or moisture and remains efficient on multigram scale. Finally, the system can be adapted to a one-pot benzoylation-deoxygenation sequence to enable direct alcohol deletion. Mechanistic studies validate that the role of acidic additives is to promote the key C(sp3 )-O bond fragmentation step.

Contemporary photoelectrochemical strategies and reactions in organic synthesis

In recent years, with the development of organic synthetic chemistry, a variety of organic synthetic methods have been discovered and applied in practical production. Photochemistry and electrochemistry have been widely used in organic synthesis recently due to their advantages such as mild conditions and green and environmental protection and have now been developed into two of the most massive synthetic strategies in the field of organic synthesis. In order to further enhance the potential of photochemistry and electrochemistry and to overcome the limitations of each, organic synthetic chemists have worked to combine the two synthetic strategies together to develop photoelectrochemistry as a new synthetic method. Photoelectrochemistry achieves the complementary advantages and disadvantages of photochemistry and electrochemistry, avoids the problem of using stoichiometric oxidants or reductants in photochemistry and easy dimerization in electrochemistry, generates highly reactive reaction intermediates under mild conditions, and achieves reactions that are difficult to accomplish by single photochemistry or electrochemistry. This review summarizes the research progress in the field of photoelectrochemistry from the perspective of photoelectro-chemical catalysts in recent years, analyzes the catalytic mechanism of various catalysts in detail, and gives a brief outlook on the research direction and development prospects in this field.

Selective Electroreductive Hydroboration of Olefins with B2pin2

Organoboron showed great potential in the synthesis of various high-value chemical compounds. Direct hydroboration of olefins has been witnessed over time as a mainstream method for the synthesis of organoboron compounds. In this work, an electroreductive anti-Markovnikov hydroboration approach of olefins with readily available B₂pin₂ to synthesize valuable organoboron compounds with high chemo- and regioselectivities under metal catalyst-free conditions was reported. This protocol exhibited broad substrate scope and good functional-group tolerance on styrenes and heteroaromatic olefins, providing synthetically useful alkylborons with high efficiency and even various deuterium borylation products with good D-incorporation when CD₃CN was employed as solvent. Furthermore, gram-scale reactions and extensive functional derivatization further highlighted the potential of this method.

Visible-Light-Induced N-Heterocyclic Carbene-Catalyzed Single Electron Reduction of Mono-Fluoroarenes

Fluoroarenes are abundant and readily available feedstocks. However, due to the high reduction potentials of mono-fluoroarenes, their photoreduction remains a continuing challenge, motivating the development of efficient activation modes to address this issue. This report presents the blue light-induced N-heterocyclic carbene (NHC)-catalyzed single electron reduction of mono-fluoroarenes for biaryl cross-couplings. We discovered that under blue light irradiation, NHC/tBuOK combination could construct powerful photoactive architectures to promote single electron transfer for C_aryl -F bond reduction via forming highly reducing NHC radical anion. Notably, the strategy was also successful to reduce C_aryl -O, C_aryl -N, and C_aryl -S bonds for biaryl cross-couplings.

Electroreduction Enables Regioselective 1,2-Diarylation of Alkenes with Two Electrophiles

Precisely introducing two similar functional groups into bulk chemical alkenes represents a formidable route to complex molecules. Especially, the selective activation of two electrophiles is in crucial demand, yet challenging for cross-electrophile-coupling. Herein, we demonstrate a redox-mediated electrolysis, in which aryl nitriles are both aryl radical precursors and redox-mediators, enables an intermolecular alkene 1,2-diarylation with a remarkable regioselectivity, thereby avoiding the involvement of transition-metal catalysts. This transformation utilizes cyanoarene radical anions for activating various aryl halides (including iodides, bromides, and even chlorides) and affords 1,2-diarylation adducts in up to 83 % yield and >20 : 1 regioselectivity with more than 80 examples, providing a feasible approach to complex bibenzyl derivatives.

A guide to organic electroreduction using sacrificial anodes

Organic electrosynthesis is a green strategy for the synthesis of valuable molecules. Electrochemical reactions using sacrificial metal anodes enable new reactivity to be uncovered that could not be achieved with traditional non-electrochemical methods. Compared with reactions using metal powder as the reducing reagent, the mild electroreduction protocols usually exhibit diverse reactivity and excellent selectivity. The inexpensive metal anodes possess low oxidation potential, which could prevent undesired overoxidation of substrates, active intermediates and products. The in situ generated metal ions from sacrificial anodes could not only serve as Lewis acids to activate the reactants but also as a promoter or mediator. This tutorial review highlights the recent achievements in this rapidly growing area within the past five years. The sacrificial anode-enabled electroreductions are discussed according to the reaction type.

Organoelectrophotocatalytic C-H Silylation of Heteroarenes

An organoelectrophotocatalytic approach for the C-H silylation of heteroarenes through dehydrogenation cross-coupling with H₂ evolution has been developed. The organoelectrophotocatalytic strategy is carried out under a simple and efficient monocatalytic system by employing 9,10-phenanthrenequinone both as an organocatalyst and as a hydrogen atom transfer (HAT) reagent, which avoids the need for an external HAT reagent, an oxidant, or a metal reagent. A variety of heteroarenes can be compatible in satisfactory yields with excellent regioselectivity.