Influence of gallic acid and tannic acid on the mechanical and barrier properties of wheat gluten films

Multifunctional and edible egg white/amylose-tannin bilayer film for perishable fruit preservation

The substantial waste of perishable foods during transportation significantly contributes to greenhouse gas emissions, intensifying the climate crisis. To mitigate the rapid spoilage of fruits, an eco-friendly bilayer film was developed using natural egg white (EW), amylose (Am), and tannic acid (TA). The EW/Am-TA bilayer film features a primary layer of amphiphilic EW, ensuring a uniform coating on hydrophobic fruit surfaces, and a secondary layer composed of Am and TA, imparting notable tensile strength (5.3 ± 0.5 MPa) and elongation at break (28.5 ± 4.1 %). This bilayer film effectively shields fruits from UV-B and UV-C radiation (~0 % transmittance at 280 and 330 nm) and exhibits antioxidant and antibacterial properties due to the presence of TA. Fruits such as bananas, avocados, and cherry tomatoes, when dip-coated with the optimized EW/Am-TA bilayer, maintained their freshness, color, weight, and texture for up to seven days, demonstrating the effectiveness of this bilayer coating in food preservation. The natural materials in the coated film are edible and can be safely removed with tap water at room temperature in <10 s, posing no food safety risks. Thus, the proposed bilayer coating presents a significant solution to the global problem of food waste.

Effects of multi-functional additives during foam extrusion of wheat gluten materials

To broaden the range in structures and properties, and therefore the applicability of sustainable foams based on wheat gluten expanded with ammonium-bicarbonate, we show here how three naturally ocurring multifunctional additives affect their properties. Citric acid yields foams with the lowest density (porosity of ~50%) with mainly closed cells. Gallic acid acts as a radical scavenger, yielding the least crosslinked/ aggregated foam. The use of a low amount of this acid yields foams with the highest uptake of the body-fluid model substance (saline, ~130% after 24 hours). However, foams with genipin show a large and rapid capillary uptake (50% in one second), due to their high content of open cells. The most dense and stiff foam is obtained with one weight percent genipin, which is also the most crosslinked. Overall, the foams show a high energy loss-rate under cyclic compression (84-92% at 50% strain), indicating promising cushioning behaviour. They also show a low compression set, indicating promising sealability. Overall, the work here provides a step towards using protein biofoams as a sustainable alternative to fossil-based plastic/rubber foams in applications where absorbent and/or mechanical properties play a key role.

Plant protein-based edible films and the effect of phenolic additives

The use of protein-based films in food preservation has been investigated as an alternative to synthetic plastics in recent years. Being biodegradable, edible, natural, and upcycling from food waste/by-products are the benefits of protein-based edible films. Their use ensures food safety as an alternative to synthetic plastics, and their film-forming properties can be improved with the addition of bioactive compounds. This review summarizes the studies on the changes in certain quality parameters of plant protein-based films, including mechanical, physicochemical, or morphological properties with the use of different forms of phenolic additives (pure phenolics, phenolic extracts, essential oils) and their application in foods during storage. Phenolics affect protein film matrix formation by acting as plasticizers or cross-linking agents and confer additional health benefits by providing bioactive properties to protein films. On the other hand, the effects were more pronounced with the use of their oxidized forms or higher concentrations. Consequently, phenolic additives have great potential to improve protein films, but further studies are still required to investigate the effects and mechanisms of phenolic addition to the protein-based films.

Unveiling the potential of linseed mucilage, its health benefits, and applications in food packaging

Industrial waste products derived from the oil industry often contain valuable substances and elements with great potential. These by-products can be used for various purposes, including as nutrients, bioactive compounds, fuels, and polymers. Linseed mucilage (LM) is one such example of a beneficial by-product obtained from linseed. It possesses favorable chemical and functional properties, depending on its method of extraction. Different pretreatments, such as enzymatic extraction, microwave-assisted extraction, pulse electric field, and ultrasound-assisted extraction, have been explored by various researchers to enhance both the yield and quality of mucilage. Furthermore, LM has exhibited therapeutic effects in the treatment of obesity, diabetes, constipation, hyperlipidemia, cancer, and other lifestyle diseases. Additionally, it demonstrates favorable functional characteristics that make it suitable to be used in bioplastic production. These properties preserve food quality, prolong shelf life, and confer antimicrobial activity. It also has the potential to be used as a packaging material, especially considering the increasing demand for sustainable and biodegradable alternatives to plastics because of their detrimental impact on environmental health. This review primarily focuses on different extraction techniques used for linseed mucilage, its mechanism of action in terms of health benefits, and potential applications in food packaging.

Noncovalent Conjugates of Anthocyanins to Wheat Gluten: Unraveling Their Microstructure and Physicochemical Properties

Intake of polyphenol-modified wheat products has the potential to reduce the incidence of chronic diseases. In order to determine the modification effect of polyphenols on wheat gluten protein, the effects of grape skin anthocyanin extract (GSAE, additional amounts of 0.1%, 0.2%, 0.3%, 0.4%, and 0.5%, respectively) on the microstructure and physicochemical properties of gluten protein were investigated. The introduction of GSAE improves the maintenance of the gluten network and increases viscoelasticity, as evidenced by rheological and creep recovery tests. The tensile properties of gluten protein were at their peak when the GSAE level was 0.3%. The addition of 0.5% GSAE may raise the denaturation temperature of gluten protein by 6.48 °C-9.02 °C at different heating temperatures, considerably improving its thermal stability. Furthermore, GSAE enhanced the intermolecular hydrogen bond of gluten protein and promoted the conversion of free sulfhydryl groups to disulfide bonds. Meanwhile, the GSAE treatment may also lead to protein aggregation, and the average pore size of gluten samples decreased significantly and the structure became denser, indicating that GSAE improved the stability of the gluten spatial network. The positive effects of GSAE on gluten protein properties suggest the potential of GSAE as a quality enhancer for wheat products.

Surface Modification of Okara Cellulose Crystals with Phenolic Acids to Prepare Multifunction Emulsifier with Antioxidant Capacity and Lipolysis Retardation Effect

Emulsion-based foods are widely consumed, and their characteristics involving colloidal and oxidative stabilities should be considered. The fabrication of the interfaces by selecting the emulsifier may improve stability and trigger lipolysis, thereby reducing energy uptake from the emulsified food. The present work aimed to develop Okara cellulose crystals (OCs) as a multifunction emulsifier to preserve the physical and chemical stability of a Pickering emulsion via surface modification with phenolic acids. The modification of OC was performed by grafting with the selected phenolics to produce OC-gallic acid (OC-G) and OC-tannic acid (OC-T) complexes. There was a higher phenolic loading efficiency when the OC reacted with gallic acid (ca. 70%) than with tannic acid (ca. 50%). This trend was concomitant with better antioxidant activity of the OC-G than OC-T. Surface modification based on grafting with phenolic acids improved capability of the OC to enhance both the colloidal and oxidative stability of the emulsion. In addition, the cellulosic materials had a retardation effect on the in vitro lipolysis compared to a protein-stabilized emulsion. Surface modification by grafting with phenolic acids successfully provided OC as an innovative emulsifier to promote physico-chemical stability and lower lipolysis of the emulsion.

Integration of wood-based components - Cellulose nanofibrils and tannic acid - into a poly(vinyl alcohol) matrix to improve functional properties

Poly(vinyl alcohol) (PVA) biocomposite films reinforced with cellulose nanofibrils (CNF) and biologically active tannic acid (TA) were prepared. The influence of different concentrations of CNF and TA in the PVA polymer matrix was investigated in terms of mechanical properties, thermal properties and hydrophobicity improvement of the prepared films. The results showed that in all cases the addition of CNF and TA improved the values of tensile strength and elastic modulus. The PVA film with 10 % CNF exhibited a 30 % higher tensile strength, and the three-component PVA film with 2 % CNF and 10 % TA (P2C10T) exhibited a 40 % higher tensile strength compared to the neat PVA film. The thermal properties (Tg, Tonset) of the PVA biocomposite films were greatly improved, with a significant effect observed for the three-component PVA films. The Tg of the PVA film with 10 % CNF and 10 % TA was 87 °C, 12 °C higher than that of the neat PVA film. For three-component PVA biocomposites with 4 % and 6 % CNF and with all weight percentages of TA, the Tonset shifted to a higher temperature range by about 30 °C compared to the neat PVA film. The PVA film with 2 % CNF and 10 % TA exhibited about a 20° higher contact angle than the neat PVA film. Moreover, the addition of both fillers to the PVA matrix resulted in PVA biocomposites with lower water absorption. PVA film with 10 % TA absorbed about 90 % less water and PVA film with 10 % CNF and 10 % TA absorbed about 80 % less water than the neat PVA film after the films were soaked in water for one hour. The better properties of the composite films produced are due to hydrogen and ester bonds between the components of the composite, which was confirmed by FT-IR spectroscopy. Antioxidant effective films were also obtained due to the biologically active TA to the PVA and PVA/CNF systems.

A novel film based on gluten, pectin, and polyphenols and its potential application in high-fat food

BACKGROUND

A novel film based on some natural ingredients (wheat gluten, pectin, and polyphenols) was used to improve the quality and storage stability of high-fat food due to their good sustainable, mechanical, and edible properties.

RESULTS

With the addition of polyphenols from Cedrus deodara (in the form of pine-needle extract (PNE)), the physicochemical properties (thickness, moisture content, and color), mechanical properties (tensile strength and elongation), barrier properties (water vapor, oil, and oxygen permeability, transmittance), and thermal stability of the composite film were improved. According to the analysis of infrared spectroscopy and molecular docking, the main compounds of PNE interacted with wheat gluten by hydrogen bonds and hydrophobic forces to form a compact and stable structure. In addition, the composite film showed a remarkable antioxidant capability to scavenge free radicals, and the film matrix could effectively protect the antioxidant activity of PNE. Furthermore, using cured meat as a model, the composite film exhibited a fine packaging performance in high-fat food during storage, which could obviously inhibit the excessive oxidation of fat and protein of cured meat and was beneficial in forming its special flavor.

CONCLUSION

Our results suggest that the composite film possessed good properties and had potential for packing of high-fat foods, which could improve the quality and safety of food during processing and storage. © 2023 Society of Chemical Industry.

Biopreservation of Refrigerated Mackerel (Auxis thazard) Slices by Rice Starch-Based Coating Containing Polyphenol Extract from Glochidion wallichianum Leaf

Both microbial decomposition and oxidative deterioration contribute to the qualitative degradation of fresh or minimally preserved fish, which negatively impacts the shelf-life of fish, especially those with dark flesh like mackerel. It is becoming more typical to use edible coatings to preserve the freshness of fish products. Herein, the effects of a rice starch (RS) based coating incorporated with dried crude, aqueous Mon-pu (Glochidion wallichianum) leaf extract (MPE) at varying concentrations (0, 0.02, 0.1, 0.5, and 1.0% w/w) on the quality characteristics of mackerel (Auxis thazard) slices during storage at 4 °C were investigated. Uncoated slices had a shelf-life of 6 days, whereas samples coated with RS and 0.5% MPE extended the shelf-life to 9 days by keeping the overall microbiological quality below the permitted level of 6 log CFU/g. The changes in thiobarbituric acid reactive substances (TBARS; <2 mg malondialdehyde equivalent/kg), propanal content, heme iron degradation, myoglobin redox instability, and surface discoloration (a* value and total color difference; ΔE) can all be delayed by this coating condition. Additionally, the RS-MPE coating can maintain the sensory quality of refrigerated mackerel slices and preserve the textural property (water holding capacity and hardness), as well as postpone the development of an off-odor as indicated by lowered contents of total volatile base-nitrogen (TVB-N; not exceeding the acceptable limit of 25 mg/100 g) and trimethylamine (TMA; not exceeding the acceptable limit of 10 mg/100 g). Therefore, a biopreservative coating made of RS and MPE, especially at 0.5%, can be employed to extend the shelf-life of refrigerated mackerel slices up to 9 days.

Biodegradable active materials containing phenolic acids for food packaging applications

The development of new materials for food packaging applications is necessary to reduce the excessive use of disposable plastics and their environmental impact. Biodegradable polymers represent an alternative means of mitigating the problem. To add value to biodegradable materials and to enhance food preservation, the incorporation of active compounds into the polymer matrix is an affordable strategy. Phenolic acids are plant metabolites that can be found in multiple plant extracts and exhibit antioxidant and antimicrobial properties. Compared with other natural active compounds, such as essential oils, phenolic acids do not present a high sensorial impact while exhibiting similar minimal inhibitory concentrations against different bacteria. This study summarizes and discusses recent studies about the potential of both phenolic acids/plant extracts and biodegradable polymers as active food packaging materials, their properties, interactions, and the factors that could affect their antimicrobial efficiency. The molecular structure of phenolic acids greatly affects their potential antioxidant and antimicrobial capacity, as well as their specific interactions with polymer matrices and food substrates. These interactions, in turn, can lead to plasticizing or cross-linking effects. In the present study, the antioxidant and antimicrobial properties of different biodegradable films with phenolic acids have been described, as well as the main factors affecting the active properties of these films as useful materials for active packaging development. More studies applying these active materials in real foods are required.

Versatile wheat gluten: functional properties and application in the food-related industry

Gluten is a key component that allows wheat flour to form a dough, and it is also a byproduct of the production of wheat starch. As a commercial product, wheat gluten is increasingly used in the food-related industry because of its versatile functional properties and wide range of sources. Wheat gluten is manufactured industrially on a large scale through the Martin process and batter process and variants thereof. Gliadin and glutenin impart cohesiveness and elasticity properties, respectively, to wheat gluten. The formation of gluten networks and polymers depends mainly on covalent bonds (disulfide bonds) and noncovalent bonds (ionic bonds, hydrogen bonds, and hydrophobic interactions). The multifunctional properties (viscoelasticity, gelation, foamability, etc.) of wheat gluten are shown by rehydration and other processing techniques. Wheat gluten has been widely used in wheat-based products, food auxiliary agents, food packaging, encapsulation and release of food functional ingredients, food adsorption and heat insulation materials, special purpose foods, and versatile applications. In the future, wheat gluten protein will be used as an important raw material to participate in the development and preparation of various food and degradable materials, and the application potential of wheat gluten in food-related industries will be massive. This review summarizes the main manufacturing processes, composition, and structure of gluten protein, and the various functional properties that support its application in the food and related industries.

Options to Improve the Mechanical Properties of Protein-Based Materials

While bio-based but chemically synthesized polymers such as polylactic acid require industrial conditions for biodegradation, protein-based materials are home compostable and show high potential for disposable products that are not collected. However, so far, such materials lack in their mechanical properties to reach the requirements for, e.g., packaging applications. Relevant measures for such a modification of protein-based materials are plasticization and cross-linking; the former increasing the elasticity and the latter the tensile strength of the polymer matrix. The assessment shows that compared to other polymers, the major bottleneck of proteins is their complex structure, which can, if developed accordingly, be used to design materials with desired functional properties. Chemicals can act as cross-linkers but require controlled reaction conditions. Physical methods such as heat curing and radiation show higher effectiveness but are not easy to control and can even damage the polymer backbone. Concerning plasticization, effectiveness and compatibility follow opposite trends due to weak interactions between the plasticizer and the protein. Internal plasticization by covalent bonding surpasses these limitations but requires further research specific for each protein. In addition, synergistic approaches, where different plasticization/cross-linking methods are combined, have shown high potential and emphasize the complexity in the design of the polymer matrix.

Integrating Antioxidant Functionality into Polymer Materials: Fundamentals, Strategies, and Applications

While antioxidants are widely known as natural components of healthy food and drinks or as additives to commercial polymer materials to prevent their degradation, recent years have seen increasing interest in enhancing the antioxidant functionality of newly developed polymer materials and coatings. This paper provides a critical overview and comparative analysis of multiple ways of integrating antioxidants within diverse polymer materials, including bulk films, electrospun fibers, and self-assembled coatings. Polyphenolic antioxidant moieties with varied molecular architecture are in the focus of this Review, because of their abundance, nontoxic nature, and potent antioxidant activity. Polymer materials with integrated polyphenolic functionality offer opportunities and challenges that span from the fundamentals to their applications. In addition to the traditional blending of antioxidants with polymer materials, developments in surface grafting and assembly via noncovalent interaction for controlling localization versus migration of antioxidant molecules are discussed. The versatile chemistry of polyphenolic antioxidants offers numerous possibilities for programmed inclusion of these molecules in polymer materials using not only van der Waals interactions or covalent tethering to polymers, but also via their hydrogen-bonding assembly with neutral molecules. An understanding and rational use of interactions of polyphenol moieties with surrounding molecules can enable precise control of concentration and retention versus delivery rate of antioxidants in polymer materials that are critical in food packaging, biomedical, and environmental applications.

Antimicrobial Food Packaging with Biodegradable Polymers and Bacteriocins

Innovations in food and drink packaging result mainly from the needs and requirements of consumers, which are influenced by changing global trends. Antimicrobial and active packaging are at the forefront of current research and development for food packaging. One of the few natural polymers on the market with antimicrobial properties is biodegradable and biocompatible chitosan. It is formed as a result of chitin deacetylation. Due to these properties, the production of chitosan alone or a composite film based on chitosan is of great interest to scientists and industrialists from various fields. Chitosan films have the potential to be used as a packaging material to maintain the quality and microbiological safety of food. In addition, chitosan is widely used in antimicrobial films against a wide range of pathogenic and food spoilage microbes. Polylactic acid (PLA) is considered one of the most promising and environmentally friendly polymers due to its physical and chemical properties, including renewable, biodegradability, biocompatibility, and is considered safe (GRAS). There is great interest among scientists in the study of PLA as an alternative food packaging film with improved properties to increase its usability for food packaging applications. The aim of this review article is to draw attention to the existing possibilities of using various components in combination with chitosan, PLA, or bacteriocins to improve the properties of packaging in new food packaging technologies. Consequently, they can be a promising solution to improve the quality, delay the spoilage of packaged food, as well as increase the safety and shelf life of food.

Microfibrillated cellulose films containing chitosan and tannic acid for wound healing applications

The effectiveness of tannic acid as antimicrobial and wound healing for burns have been shown for a century; however, uncontrolled target dosage may result in undesirable side-effects. Remarkably, tannic acid polyphenols compounds crosslinked with polymeric materials produce a strong composite containing the beneficial properties of this tannin. However, investigation of the crosslink structure and its antibacterial and regenerative properties are still unknown when using nanocellulose by mechanical defibrillation; additionally, due to the potential crosslink structure with chitosan, its structure can be complex. Therefore, this work uses bleach kraft nanocellulose in order to investigate the effect on the physical and regenerative properties when incorporated with chitosan and tannic acid. This film results in increased rigidity with a lamellar structure when incorporated with tannic acid due to its strong hydrogen bonding. The release of tannic acid varied depending on the structure it was synthesised with, whereas with chitosan it presented good release model compared to pure cellulose. In addition, exhibiting similar thermal stability as pure cellulose films with antibacterial properties tested against S. aureus and E. coli with good metabolic cellular viability while also inhibiting NF-κB activity, a characteristic of tannic acid.

Chicken gelatin modification by caffeic acid: A response surface methodology investigation

Chemical modifications of gelatin from mechanically separated chicken meat (MSM) residue were practiced using caffeic acid as a cross-linker. The effects of oxidation period (OP), cross-linking temperature (CT), and caffeic acid (CA) concentration were investigated. Experiments were performed using Response Surface Methodology (RSM). The effects of 16 different cross-linking modifications on the physicochemical properties of chicken gelatin gels were investigated. Maximum gel strength was determined at 12.5 min OP, 50 °C CT and 2.5% CA concentration and this was 63% higher than the control (uncross-linked chicken gelatin). Temperature has an increasing effect on the degree of cross-linking value up to a certain degree. The highest degree of cross-linking was observed at between 50° and 55 °C. The color characteristics of gels were affected by cross-linking having more brown color. Overall this study demonstrated that caffeic acid has a potential to be an efficient natural cross-linking factor increasing the mechanical properties of chicken gelatin thermo-irreversibly.

Effects of edible plant polyphenols on gluten protein functionality and potential applications of polyphenol-gluten interactions

Expanding plant-based protein applications is increasingly popular. Polyphenol interactions with wheat gluten proteins can be exploited to create novel functional foods and food ingredients. Polyphenols are antioxidants, thus generally decrease gluten strength by reducing disulfide cross-linking. Monomeric polyphenols can be used to reduce dough mix time and improve flexibility of the gluten network, including to plasticize gluten films. However, high-molecular-weight polyphenols (tannins) cross-link gluten proteins, thereby increasing protein network density and strength. Tannin-gluten interactions can greatly increase gluten tensile strength in dough matrices, as well as batter viscosity and stability. This could be leveraged to reduce detrimental effects of healthful inclusions, like bran and fiber, to loaf breads and other wheat-based products. Further, the dual functions of tannins as an antioxidant and gluten cross-linker could help restructure gluten proteins and improve the texture of plant-based meat alternatives. Tannin-gluten interactions may also be used to reduce inflammatory effects of gluten experienced by those with gluten allergies and celiac disease. Other potential applications of tannin-gluten interactions include formation of food matrices to reduce starch digestibility; creation of novel biomaterials for edible films or medical second skin type bandages; or targeted distribution of micronutrients in the digestive tract. This review focuses on the effects of polyphenols on wheat gluten functionality and discusses emerging opportunities to employ polyphenol-gluten interactions.

Evaluation of multifunctional properties of gallic acid crosslinked Poly (vinyl alcohol)/Tragacanth Gum blend films for food packaging applications

The natural polymer Tragacanth Gum is less explored as a supporting matrix, there are very less studies conducted using this polymer in literature. So the present study aims to explore the consequences of different weight percent (wt.%) of gallic acid (GA) on physicochemical properties of Poly (vinyl alcohol)/Tragacanth Gum blend films. The incorporation of GA resulted in more strengthened but less flexible films as confirmed by tensile tests. DSC studies confirmed the miscibility of composite films in the given composition range and TGA studies revealed increased thermal stability. The morphological studies revealed a homogeneous distribution of GA at lower wt.% in the blend system. X-Ray Diffraction study depicted; the added GA lost crystalline structure after incorporating it into the blend. The Water Vapor Transmission Rate (WVTR) was improved after the incorporation of GA into the blend system. Overall migration studies revealed the limited release of GA from the matrix into food simulants. Soil degradation rate increased as the wt.% of GA increased. The composite films presented strong antioxidant activity; therefore, prepared composite films could be used as an alternative to current packaging materials.

Gallic Acid and Quercetin as Intelligent and Active Ingredients in Poly(vinyl alcohol) Films for Food Packaging

Gallic acid (GA) and quercetin (QC) were used as active ingredients in poly(vinyl alcohol) (PVA) film formulations obtained by solvent casting process. The effect of two different percentages (5 and 10 % wt.) on morphological behavior, thermal stability, optical, mechanical, and release properties of PVA were investigated, while migration with food stimulants and antioxidant properties were tested taking into account the final application as food packaging systems. The results showed how different dispersability in PVA water solutions gave different results in term of deformability (mean value of ε PVA/5GA = 280% and ε PVA/5QC = 255%, with 190% for neat PVA), comparable values for antioxidant activity at the high contents (Radical Scavenging Activity, RSA(%) PVA/10GA = 95 and RSA(%) PVA/10QC = 91) and different coloring attitude of the polymeric films. It was proved that GA, even if it represents the best antioxidant ingredient to be used with PVA and can be easily dispersed in water, it gives more rigid films in comparison to QC, that indeed was more efficient in tuning the deformability of the PVA films, due the presence of sole hydroxyl groups carrying agent. The deviation of the film coloring towards greenish tones for GA films and redness for QC films after 7 and within 21 days in the simulated conditions confirmed the possibility of using easy processable PVA films as active and intelligent films in food packaging.

Araucaria angustifolia (Bertol.) Kuntze extract as a source of phenolic compounds in TPS/PBAT active films

There is growing interest in the development of biodegradable packaging materials containing natural antioxidant extracts.

A Novel Way of Adhering PET onto Protein (Wheat Gluten) Plastics to Impart Water Resistance

This study presents an approach to protect wheat gluten (WG) plastic materials against water/moisture by adhering it with a polyethylene terephthalate (PET) film using a diamine (Jeffamine®) as a coupling agent and a compression molding operation. The laminations were applied using two different methods, one where the diamine was mixed with the WG powder and ground together before compression molding the mixture into plates with PET films on both sides. In the other method, the PET was pressed to an already compression molded WG, which had the diamine brushed on the surface of the material. Infrared spectroscopy and nanoindentation data indicated that the diamine did act as a coupling agent to create strong adhesion between the WG and the PET film. Both methods, as expected, yielded highly improved water vapor barrier properties compared to the neat WG. Additionally, these samples remained dimensionally intact. Some unintended side effects associated with the diamine can be alleviated through future optimization studies.

Edible Gum-Phenolic-Lipid Incorporated Gluten Films for Food Packaging

The aim of this investigation was to improve the barrier and mechanical properties of gluten films and further explore their application in the packaging of seasonings. The effects of flaxseed gum (FG), oligomeric procyanidins (OPCs), and lauric acid (LA) on the water vapor permeability (WVP), mechanical properties, and peroxide value (POV) were determined. FG and OPCs improved the WVP properties of the gluten films, whereas LA significantly improved the oxygen-barrier properties. The FG/OPCs/LA/GP composite film was then optimized, and the morphological, microstructural, and thermal properties of the composite gluten film were investigated by scanning electron microscopy, atomic force microscopy, surface hydrophobicity analysis; Fourier transform infrared spectroscopy; thermal gravimetric analysis, respectively. The results confirmed that gluten is compatible with FG, OPCs, and LA, thereby leading to the formation of a more uniform, dense, and hydrophobic film. The changes in the preservation properties (appearance, POV, and acid value) of the composite gluten film for oil, salt, and vegetable packaging were also examined. The composite gluten film maintained some degree of seasoning packaging capacity over a 75-day storage period, indicating its potential for uses as a packaging material for seasonings in food production.

PRACTICAL APPLICATION

The edible composite film will be produced in industry according to the data provided in our paper; the film can be used as packaging material for seasonings in food production.

Quality and biochemical changes of 'Hindi-Besennara' mangoes during shelf life as affected by chitosan, gallic acid and chitosan gallate

Quality and biochemical changes of 'Hindi-Besennara' mangoes in response to chitosan, gallic acid (GA) and chitosan gallate (CG) postharvest dipping were studied during 2 weeks of storage at 20 ± 2 °C and 60-70% RH. Both GA and CG lowered decay and weight loss during storage. Chitosan and GA at high level and CG at both level maintained higher membrane stability index of peel than control. Fruits treated only CG and GA at high level and chitosan at both levels retained higher acidity and vitamin C but lower pH and total soluble solids (TSS) than control. All treatments resulted with fruits with higher flesh firmness and lower TSS/acid ratio than untreated fruits. GA at both rates gave lower total phenols after 1 week of storage than control. Both levels of GA and low level of chitosan resulted with fruits with higher antioxidant capacity (lower IC50 values) after 1 week of storage than control. All treatments decreased α-amylase activity of fruit peel compared to control. CG and GA at high level and chitosan at low level increased peroxidase activity compared to control. It was concluded that CG and GA dipping delayed ripening and maintained quality of 'Hindi-Besennara' mangoes during 2 weeks of shelf life.

Zein films with unoxidized or oxidized tannic acid

BACKGROUND

Corn zein is a predominatly hydrophobic protein, forming films with relatively good water resistance. Tannic acid, especially in its oxidized form, is supposed to cross-link proteins including zein, which may be explored to further enhance the water resistance of zein films. The effects of different contents (0-8 wt%) of unoxidized and oxidized tannic acid (uTA and oTA, respectively) on the properties of zein films at different pH values (4-9) were studied, according to central composite designs.

RESULTS

Increasing tannic acid contents and pH values resulted in decreased water solubility and increased tensile strength and modulus of films. The presence of tannic acid provided the films with a yellowish color and increased opacity. Paired t-tests indicated that oTA films presented higher tensile strength, lower water vapor permeability and lower water solubility than uTA films.

CONCLUSION

Higher tannic acid contents and pH values resulted in films with better overall physical properties, which might be ascribed to cross-linking, although the films were still not water resistant. The resulting films have potential to be used for food packaging and coating applications. © 2017 Society of Chemical Industry.