Effect of pH on the complexation of kaempferol-4'-glucoside with three β-cyclodextrin derivatives: isothermal titration calorimetry and spectroscopy study

Preparation, structural analysis of alcohol aroma compounds/β-cyclodextrin inclusion complexes and the application in strawberry preservation

The dynamic combination of aromas and cyclodextrins is an important means to achieve their stability and controllability, and accurately revealing their interaction rules is the key to designing and constructing high-quality aroma nanocarriers. In this study, the inclusion mechanism between alcohol aroma compounds with different structures and β-cyclodextrin (β-CD) was studied by combining molecular dynamics simulation and experimental methods. Results showed that the selected alcohol aroma compounds formed inclusion complexes (ICs) with β-CD in a 1:1 ratio, while alcohol aroma compounds containing cyclic structures were more tightly bound to β-CD. Van der Waals forces were the primary forces driving the formation and stabilization of the ICs. Cinnamyl alcohol/β-CD ICs showed the most significant antimicrobial effect and notably prolonged the shelf life of strawberries. This study aimed to provide theoretical support for precisely designing and preparing highly stable flavours and fragrances, as well as expanding their application range.

Study on co-amorphous emerging solubilization behavior after gelation during dissolution: The importance of complexation and anti-crystallization

Co-amorphous (CM) is a promising technology for enhancing the aqueous solubility of insoluble drugs, but the gelation phenomenon has often occurred during the dissolution process and seriously threatened their solubility/dissolution performance. Therefore, it's quite important to design favorable CM systems to alleviate or even avoid the adverse effects of gelation phenomenon. In this study, CM systems of taxifolin (TAX) and oxymatrine (OMT) (TAX-OMT CMs) were constructed to improve the solubility and dissolution properties of TAX. Interestingly, TAX-OMT CMs gradually aggregated and obviously gelled during dissolution, but the solubility and dissolution of TAX in TAX-OMT CMs were significantly enhanced compared to crystalline TAX. Consequently, the underlying solubilization mechanisms of TAX-OMT CMs after gelation were systematically explored. For one thing, the complexation between the two components in TAX-OMT CMs was verified by phase solubility, fluorescence spectroscopy and isothermal titration calorimetry. For another, the residual solids of TAX-OMT CMs after dissolution evaluation were thoroughly characterized by means of powder X-ray diffraction, fourier transform infrared spectroscopy, scanning electron microscopy, which showed the anti-crystallization property of TAX-OMT CMs. Furthermore, molecular simulation demonstrated the intermolecular interactions of TAX-OMT CMs alone and TAX-OMT complexes in aqueous solution. Finally, pharmacokinetics study in rats suggested that the bioavailability of TAX in TAX-OMT CM (1:2) was approximately 5.5-fold higher than that of crystalline TAX after oral administration. Collectively, this study reveals the importance of complexation and anti-crystallization effects of CM systems on maintaining solubilization behavior after gelation, providing an effective strategy to improve the absorption performance of pharmaceutical CM systems.

Encapsulation of 4-terpineol with β-cyclodextrin: Inclusion mechanism, characterization and relative humidity-triggered release

4-Terpineol (4-TA), a typical monocyclic monoterpene essential oil compound with important biological activities, poor stability and solubility severely hamper its biological activities. To date, β-cyclodextrin (β-CD) encapsulating essential oil to form inclusion complexes (ICs) is considered as a satisfactory treatment. Nevertheless, the detailed inclusion mechanism of β-CD for 4-TA especially the behavior of 4-TA during inclusion formation have not available yet. Herein, 4-TA/β-CD ICs were successfully synthesized by the co-precipitation method, and hydrogen bonds and hydrophobic interactions played a key role in the formation of ICs, and the isopropyl of 4-TA entered the cavity through the wide rim of β-CD. Moreover, the release profile demonstrated that high RH (85 % and 99 %) triggered the release of TA from ICs. This study suggests the great potential of cyclodextrin inclusion strategy for improving the stability and sustained release of 4-TA in food preservation application.

ITC analysis of polydisperse systems: Unravelling the impact of sample heterogeneity

Binding interactions often involve heterogeneous samples displaying a distribution of binding sites that vary in affinity and binding enthalpy. Examples include biological samples like proteins and chemically produced samples like modified cyclodextrins. Experimental studies often ignore sample heterogeneity and treat the system as an interaction of two homogeneous species, i.e. a chemically well-defined ligand binding to one type of site. The present study explores, by simulations and experiments, the impact of heterogeneity in isothermal titration calorimetry (ITC) setups where one of the binding components is heterogeneous. It is found that the standard single-site model, based on the assumption of two homogeneous binding components, provides excellent fits to simulated ITC data when the binding free energy is normally distributed and all sites have similar binding enthalpies. In such cases, heterogeneity can easily go undetected but leads to underestimated binding constants. Heterogeneity in the binding enthalpy is a bigger problem and may result in enthalpograms of increased complexity that are likely to be misinterpreted as two-site binding or other complex binding models. Finally, it is shown that heterogeneity can account for previously observed experimental anomalies. All simulations are accessible in Google Colab for readers to experiment with the simulation parameters.

Hydroxypropyl-β-Cyclodextrin-Based Helichrysum italicum Extracts: Antioxidant and Cosmeceutical Activity and Biocompatibility

Two Helichrysum italicum extracts, OPT-1 (rich in phenolic acids) and OPT-2 (rich in total phenols and flavonoids), were prepared using hydroxypropyl-β-cyclodextrin (HP-β-CD)-assisted extraction. The prepared extracts were rich in phenolic compounds, including flavonoids and phenolic acids. GC-MS analysis of the extracts identified neryl acetate, neo-intermedeol, β-selinene, γ-curcumene, italidione I, and nerol as the main volatile components of the extracts, as well as plant sterols, γ-sitosterol, campesterol, and stigmasterol. The antioxidant (DPPH radical scavenging, reducing power, and a carotene linoleic acid assay) and cosmeceutical (anti-hyaluronidase, anti-tyrosinase, anti-lipoxygenase, ovalbumin anti-coagulation, and a UV-absorption assay) activity of the extracts in most of the assays was better than the activity of the applied positive controls. Especially low were the IC50 values of the extracts in the anti-hyaluronidase (14.31 ± 0.29 μL extract/mL and 19.82 ± 1.53 μL extract/mL for OPT-1 and OPT-2, respectively) and the anti-lipoxygenase (0.96 ± 0.11 μL extract/mL and 1.07 ± 0.01 μL extract/mL for OPT-1 and OPT-2, respectively) assays. The extracts were non-toxic to HaCaT cells in concentrations of up to 62.5 µL extract/mL assuring their status as excellent candidates for cosmeceutical product development appropriate for direct use in cosmetic products without solvent evaporation.

Optimization of Cyclodextrin-Assisted Extraction of Phenolics from Helichrysum italicum for Preparation of Extracts with Anti-Elastase and Anti-Collagenase Properties

Helichrysum italicum is a plant traditionally used for skin-related disorders that is becoming an increasingly popular ingredient in cosmetic products. In this work, a "green" ultrasound-assisted extraction method for H. italicum phenolics was developed using skin-friendly cyclodextrins (CDs). Extraction conditions needed for the greatest yield of target compounds (total phenolics, phenolic acids, and flavonoids) were calculated. The composition of the extracts was determined using LC-MS and spectrophotometric methods. Among the tested CDs, 2-hydroxylpropyl-beta-CD (HP-β-CD) was the best suited for extraction of target phenolics and used to prepare two optimized extracts, OPT 1 (the extract with the highest phenolic acid content) and OPT 2 (the extract with the highest total phenol and flavonoid content). The extracts were prepared at 80 °C, using 0.089 g of plant material/g solvent (0.6 mmol of HP-β-CD), with or without addition of 1.95% (w/w) lactic acid. The main metabolite in both extracts was 3,5-O-dicaffeoylquinic acid. It was found that the addition of lactic acid greatly contributes to the extraction of arzanol, a well-known anti-inflammatory agent. IC₅₀ values of the anti-elastase (22.360 ± 0.125 μL extract/mL and 20.067 ± 0.975 for OPT-1 and OPT-2, respectively) and anti-collagenase (12.035 ± 1.029 μL extract/mL and 14.392 ± 0.705 μL extract/mL for OPT-1 and OPT-2, respectively) activities of the extracts surpassed those of the applied positive controls, namely ursolic and gallic acids. This activity deems the prepared extracts promising ingredients for natural cosmetics, appropriate for direct use in cosmetic products, removing the need for the evaporation of conventional solvents.

Unveiling the Thermodynamic Aspects of Drug-Cyclodextrin Interactions Through Isothermal Titration Calorimetry

Due to their low toxicity and high aqueous solubility, cyclodextrins have emerged as a distinctive class of supramolecules with wide application in the pharmaceutical and food industry. Their ability to improve the water solubility, stability and pharmacokinetic profile of small molecules has established them as a rich toolkit for drug formulation. In order to improve the physicochemical characteristics and the pharmacokinetic profile of a drug through cyclodextrin inclusion, the proper cyclodextrin type has to be selected among the existing great variety consisting of both natural and synthetic variants. The selection of the most proper cyclodextrin variant comes after drug-cyclodextrin screening studies targeting the characterization of the complex formation and evaluation of the affinity and interaction forces participating in the complexation. Numerous analytical, spectroscopic, separation and electrochemical techniques have been applied to elucidate the interaction profile in a cyclodextrin-drug complex. Herein, we describe the application of Isothermal Titration Calorimetry (ITC) on cyclodextrin-drug complexes that enables the charting of the binding affinity and the thermodynamic profile of the inclusion complexes. We focus on the experimental design and present technical tips of the ITC application. To better illustrate the technique's rationale, the interaction between 2-hydroxypropyl-β-cyclodextrin (HP-β-CD) and the antihypertensive drug losartan is investigated.

Charting the structural and thermodynamic determinants in phenolic acid natural product - cyclodextrin encapsulations

Cyclodextrins are pliable platforms that have served to optimize the pharmaceutic profile of numerous compounds and to enhance the stability of natural food additives. Caffeic and rosmarinic acid are natural products with proven health benefits, though their full therapeutic potential has not been exploited. To enhance their pharmaceutic profile, we developed cyclodextrin-based formulates and unveiled their thermodynamic and structural principles. The complexes' stoichiometry was determined by ESI-MS. Solid-state and liquid NMR spectroscopy revealed the interactions and the topographical location of the caffeic and rosmarinic acid inside the cyclodextrin cavity. The theoretically analyzed HP-β-CD's degree of substitution (DS) of caffeic and rosmarinic acids can explain the intensities obtained by 2D NOESY experiments. The thermodynamics and the affinity of the complexes were evaluated through isothermal titration calorimetry. In addition, the rosmarinic and caffeic acids as, also, their complexes showed considerable antimicrobial activity against common food spoilage and pathogenic bacteria. The generated data could provide the basis to understand the structural and thermodynamic determinants implicated in natural products - CD recognition and to develop platforms for the optimization of their pharmaceutical and stability profiles in order to be utilized as safe and stable natural antimicrobial food additives.Communicated by Ramaswamy H. Sarma.

Molecular mechanism underlying the effects of temperature and pH on the size and surface charge of octenylsuccinated oat β-glucan aggregates

Environmental temperature and pH induced significant changes in the size and surface charge (ζ) of octenylsuccinated oat β-glucan aggregates. The underlying mechanisms were explored by using ¹H-NMR, fluorescence spectra, thermodynamic analysis, and SAXS. At pH 6.5, the size decreased with temperature while ζ continuously increased. With increasing pH at 293 K, parabolic and U-shaped trends were observed in the size and ζ, peaking at pH 8.5 and 6.5, respectively. At any tested pH, the size decreased with temperature. Overall, ζ significantly increased with temperature at each pH. As temperature increased, the compactness of hydrophobic-domains increased while the compactness of hydrophilic-domains decreased. In an acidic environment, both the compactness increased with decreasing pH, but in an alkaline environment, they decreased with pH. The compactness changes were co-driven by enthalpy and entropy and corresponded to changes in the hydrophobic interactions in hydrophobic-domains, hydrogen bonds in hydrophilic-domains and electrostatic repulsions among octenylsuccinate molecules.

Host-Guest Interactions between Candesartan and Its Prodrug Candesartan Cilexetil in Complex with 2-Hydroxypropyl-β-cyclodextrin: On the Biological Potency for Angiotensin II Antagonism

Renin-angiotensin aldosterone system inhibitors are for a long time extensively used for the treatment of cardiovascular and renal diseases. AT1 receptor blockers (ARBs or sartans) act as antihypertensive drugs by blocking the octapeptide hormone Angiotensin II to stimulate AT1 receptors. The antihypertensive drug candesartan (CAN) is the active metabolite of candesartan cilexetil (Atacand, CC). Complexes of candesartan and candesartan cilexetil with 2-hydroxylpropyl-β-cyclodextrin (2-HP-β-CD) were characterized using high-resolution electrospray ionization mass spectrometry and solid state ¹³C cross-polarization/magic angle spinning nuclear magnetic resonance (CP/MAS NMR) spectroscopy. The ¹³C CP/MAS results showed broad peaks especially in the aromatic region, thus confirming the strong interactions between cyclodextrin and drugs. This experimental evidence was in accordance with molecular dynamics simulations and quantum mechanical calculations. The synthesized and characterized complexes were evaluated biologically in vitro. It was shown that as a result of CAN's complexation, CAN exerts higher antagonistic activity than CC. Therefore, a formulation of CC with 2-HP-β-CD is not indicated, while the formulation with CAN is promising and needs further investigation. This intriguing result is justified by the binding free energy calculations, which predicted efficient CC binding to 2-HP-β-CD, and thus, the molecule's availability for release and action on the target is diminished. In contrast, CAN binding was not favored, and this may allow easy release for the drug to exert its bioactivity.

Mechanism study on pH-responsive cyclodextrin capped mesoporous silica: effect of different stalk densities and the type of cyclodextrin

Cyclodextrin (CD)-capped mesoporous silica nanoparticles (MSN) with pH-responsive properties were synthesized, but little research has been carried out to evaluate the impact of critical factors such as the stalk density and the type of CD on the pH-responsive release behavior. Here, the effect of different stalk densities on the pH-responsive release behavior was investigated. Either too low or too high density of the grafted p-anisidine stalk could result in poor cargo release, and the optimum stalk density for MSN was measured by thermal analysis, and found to be approximately 8.7 stalks nm(-2). To achieve effective release control, the CD capes, α-CD and β-CD, were also investigated. Isothermal titration calorimetry (ITC) analysis was employed to determine the formation constants (Kf) of the two CD with p-anisidine at different pH values. The results obtained showed that the complex of β-CD with p-anisidine had excellent pH-responsive behavior as it exhibited the largest changed formation constant (ΔKf) in different pH media. Furthermore, the pH-responsive mechanism between CD and p-anisidine molecules was investigated through ITC and a molecular modeling study. The release of antitumor drug DOX presents a significant prospect toward the development of pH-responsive nanoparticles as a drug delivery vehicle.

Fitting two- and three-site binding models to isothermal titration calorimetric data

As isothermal titration calorimetry (ITC) gains popularity for the characterization of enthalpies and equilibrium association constants of simple 1:1 biomolecular interactions, its use for more complex systems is growing. The method is increasingly used to study interactions in which a single binding partner (molecule "A") interacts with multiple copies of a second partner ("B"); thus examinations of ABB and ABBB interactions are not uncommon. The structure of ITC data (commonly formatted as isotherms) has a strong bearing on the ability of the researcher to extract the necessary parameters from them. Usually, only 10-30 injections are recorded in a single ITC experiment. Even if replicates are performed, the data must support the extraction of up to twelve parameters from an ABBB system. Further, the refinement of some of the parameters is largely driven by only a subset of the data. The ability of ITC data to guide the deterministic estimation of these parameters may therefore be questioned. This work assesses the ability of both empirical and simulated ITC data of ABB and ABBB systems to support the simultaneous estimation of the desired thermodynamic parameters. The results demonstrate that multiphasic isotherms tend to (but do not always) support the estimation of multiple parameters. On the other hand, uniphasic data obtained from multi-site binding systems are more problematic. In all cases, a thorough exploration of how precisely the estimated parameters are specified by the data is justified.