Sustained release of fipronil insecticide in vitro and in vivo from biocompatible silica nanocapsules

A dew-responsive pectin-based herbicide for enhanced photodynamic inactivation

5-aminolevulinic acid (5-ALA) has been fully demonstrated as a biodegradable, without resistance, and pollution-free pesticide. However, the lack of targeting and the poor adhesion result in a low utilization rate, limiting its practical application. Herein, a dew-responsive polymer pro-pesticide Pec-hyd-ALA was successfully synthesized by grafting 5-ALA onto the pectin (PEC) backbone via acid-sensitive acylhydrazone bonds. When the pro-pesticide is exposed to acid dew on plant surfaces at night, 5-ALA is released and subsequently converted to photosensitize (Protoporphyrin IX, PpIX)in plant cells, leading to its accumulation and promoting photodynamic inactivation (PDI). An inverted fluorescence microscope has verified the accumulation of tetrapyrrole in plant cells. In addition, the highly bio-adhesive PEC backbone effectively improved the wetting and retention of 5-ALA on leaves. The pot experiment also demonstrated the system's control effect on barnyard grass. This work provides a promising approach to improving the herbicidal efficacy of 5-ALA.

Design, Synthesis, and Bioactivity of Trifluoroethylthio-Substituted Phenylpyrazole Derivatives

As the first marketed phenylpyrazole insecticide, fipronil exhibited remarkable broad-spectrum insecticidal activity. However, it poses a significant threat to aquatic organisms and bees due to its high toxicity. Herein, 35 phenylpyrazole derivatives containing a trifluoroethylthio group on the 4 position of the pyrazole ring were designed and synthesized. The predicted physicochemical properties of all of the compounds were within a reasonable range. The biological assay results revealed that compound 7 showed 69.7% lethality against Aedes albopictus (A. albopictus) at the concentration of 0.125 mg/L. Compounds 7, 7g, 8d, and 10j showed superior insecticidal activity for the control of Plutella xylostella (P. xylostella). Notably, compound 7 showed similar insecticidal activity against Aphis craccivora (A. craccivora) compared with fipronil. Potential surface calculation and molecular docking suggested that different lipophilicity and binding models to the Musca domestica (M. domestica) gamma-aminobutyric acid receptors may be responsible for the decreased activity of the tested derivatives. Toxicity tests indicated that compound 8d (LC50 = 14.28 mg/L) induced obviously 14-fold lower toxicity than fipronil (LC50 = 1.05 mg/L) on embryonic-juvenile zebrafish development.

Herbicidal weed management practices: History and future prospects of nanotechnology in an eco-friendly crop production system

Weed management is an important aspect of crop production, as weeds cause significant losses in terms of yield and quality. Various approaches to weed management are commonly practiced by crop growers. Due to limitations in other control methods, farmers often choose herbicides as a cost-effective, rapid and highly efficient weed control strategy. Although herbicides are highly effective on most weeds, they are not a complete solution for weed management because of the genetic diversity and evolving flexibility of weed communities. The excessive and indiscriminate use of herbicides and their dominance in weed control have triggered the rapid generation of herbicide-resistant weed species. Moreover, environmental losses of active ingredients in the herbicides cause serious damage to the environment and pose a serious threat to living organisms. Scientific advances have enabled nanotechnology to emerge as an innovation with real potential in modern agriculture, adding a new dimension in the preparation of controlled release formulations (CRF) of herbicides. Here the required amount of active ingredients is released over longer periods of time to obtain the desired biological efficacy whilst reducing the harmful effects of these chemicals. Various organic and inorganic carrier materials have been utilised in CRF and researchers have a wide range of options for the synthesis of eco-friendly carrier materials, especially those with less or no toxicity to living organisms. This manuscript addresses the history, progress, and consequences of herbicide application, and discusses potential ways to reduce eco-toxicity due to herbicide application, along with directions for future research areas using the benefits of nanotechnology.

Application of nanopesticides and its toxicity evaluation through Drosophila model

Insects feed on plants and cause the growth of plants to be restricted. Moreover, the application of traditional pesticides causes harmful effects on non-target organisms and poses serious threats to the environment. The use of conventional pesticides has negative impacts on creatures that are not the intended targets. It also presents significant risks to the surrounding ecosystem. Insects that are exposed to these chemicals eventually develop resistance to them. This review could benefit researcher for future development of nanopesticides research. This is because a holistic approach has been taken to describe the multidimensional properties of nanopesticides, health and environmental concerns and its possible harmful effects on non-target organisms and physiochemical entities. The assessment of effects of the nanopesticides is also being discussed through the drosophotoxicology. The future outlooks have been suggested to take a critical analysis before commercialization or formulation of the nanopesticides.

Silica nanoparticles mediated insect pest management

Silicon is known for mitigating the biotic and abiotic stresses of crop plants. Many studies have proved beneficial effects of bulk silicon against biotic stresses in general and insect pests in particular. However, the beneficial effects of silica nanoparticles in crop plants against insect pests were barely studied and reported. By virtue of its physical and chemical nature, silica nanoparticles offer various advantages over bulk silicon sources for its applications in the field of insect pest management. Silica nanoparticles can act as insecticide for killing target insect pest or it can act as a carrier of insecticide molecule for its sustained release. Silica nanoparticles can improve plant resistance to insect pests and also aid in attracting natural enemies via enhanced volatile compounds emission. Silica nanoparticles are safe to use and eco-friendly in nature in comparison to synthetic pesticides. This review provides insights into the applications of silica nanoparticles in insect pest management along with discussion on its synthesis, side effects and future course of action.

Nanopesticides in comparison with agrochemicals: Outlook and future prospects for sustainable agriculture

Agrochemicals are products of advanced technologies that use inorganic pesticides and fertilizers. Widespread use of these compounds has adverse environmental effects, leading to acute and chronic exposure. Globally, scientists are adopting numerous green technologies to ensure a healthy and safe food supply and a livelihood for everyone. Nanotechnologies significantly impact all aspects of human activity, including agriculture, even if synthesizing certain nanomaterials is not environmentally friendly. Numerous nanomaterials may therefore make it easier to create natural insecticides, which are more effective and environmentally friendly. Nanoformulations can improve efficacy, reduce effective doses, and extend shelf life, while controlled-release products can improve the delivery of pesticides. Nanotechnology platforms enhance the bioavailability of conventional pesticides by changing kinetics, mechanisms, and pathways. This allows them to bypass biological and other undesirable resistance mechanisms, increasing their efficacy. The development of nanomaterials is expected to lead to a new generation of pesticides that are more effective and safer for life, humans, and the environment. This article aims to express at how nanopesticides are being used in crop protection now and in the future. This review aims to shed some light on the various impacts of agrochemicals, their benefits, and the function of nanopesticide formulations in agriculture.

Engineered silica nanomaterials in pesticide delivery: Challenges and perspectives

Over the past decade, nanopesticide has been developed rapidly for exploring effective and safe alternatives to conventional pesticides with significant drawbacks and risks. Many nanotechnologies, including pesticide nanoemulsions, polymer-based nanopesticides, and metal/metal oxide nanoparticle-based pesticides have emerged and are extensively reviewed. Engineered silica nanomaterials (ESNs) have also shown promising potential as carriers in nanopesticides for modern agriculture. However, there are limited reviews specifically on ESN-based nanopesticides. Herein, we provide a comprehensive review on the recent progress of ESN-based nanopesticide technologies. An introduction of synthetic technology, formation mechanism, and surface engineering technology is firstly presented. Then, the advantages of ESN-based pesticide formulation and their structure-function-relationship are illustrated in detail. Finally, our perspectives on challenges and future research in ESN-based nanopesticide development are discussed.

Advances in stimuli-responsive systems for pesticides delivery: Recent efforts and future outlook

Effective pest management for enhanced crop output is one of the primary goals of establishing sustainable agricultural practices in the world. Pesticides are critical in preventing biological disasters, ensuring crop productivity, and fostering sustainable agricultural production growth. Studies showed that crops are unable to properly utilize pesticides because of several limiting factors, such as leaching and bioconversion, thereby damaging ecosystems and human health. In recent years, stimuli-responsive systems for pesticides delivery (SRSP) by nanotechnology demonstrated excellent promise in enhancing the effectiveness and safety of pesticides. SRSP are being developed with the goal of delivering precise amounts of active substances in response to biological needs and environmental factors. An in-depth analysis of carrier materials, design fundamentals, and classification of SRSP were provided. The adhesion of SRSP to crop tissue, absorption, translocation in and within plants, mobility in the soil, and toxicity were also discussed. The problems and shortcomings that need be resolved to accelerate the actual deployment of SRSP were highlighted in this review.

Construction of a novel fluorescent nanocarrier with double hollow shells for pH-controlled release of imidacloprid and its distribution and transport in bok choy

Nanotechnology has been widely used in the field of pesticides. Integration of nano-pesticides and carbon dot fluorescence can fully utilize the potential for high admission of pesticides on leaves and convenience observation of its distribution and transport in the tissues. In the present study, a fluorescent mesoporous nanosilica with double hollow shells for loading imidacloprid (Im@FL-MSNs) was designed and synthesized. The physical and chemical properties of the imidacloprid nanocarriers were characterized by transmission electron microscopy (TEM), FT-IR spectroscopy, thermogravimetric analysis (TGA), X-ray photoelectron spectroscopy (XPS) and N₂ adsorption/desorption. When the mass ratio of FL MSNs to imidacloprid is 6:5, Im@FL-MSNs exhibits good fluorescence properties, high loading efficiency (∼30%), great slow-release performance as well as pH controllability. Besides, Im@FL-MSNs can improve the ability of imidacloprid to adhere on the leaf surface of bok choy (Initial contact angled is greater than 80°）. Importantly, Im@FL-MSNs did not reduce the biological activity of imidacloprid (LC₅₀ (95% CI) = 1.43 mg/L). It was able to visually study the absorption and distribution of imidacloprid in bok choy plants, and provide theoretical and technical guidance for pesticide reduction.

Copper Glufosinate-Based Metal-Organic Framework as a Novel Multifunctional Agrochemical

Pesticides are agrochemical compounds used to kill pests (insects, rodents, fungi, or unwanted plants), which are key to meet the world food demand. Regrettably, some important issues associated with their widespread/extensive use (contamination, bioaccumulation, and development of pest resistances) demand a reduction in the amount of pesticide applied in crop protection. Among the novel technologies used to combat the deterioration of our environment, metal-organic frameworks (MOFs) have emerged as innovative and promising materials in agroindustry since they possess several features (high porosity, functionalizable cavities, ecofriendly composition, etc.) that make them excellent candidates for the controlled release of pesticides. Moving toward a sustainable development, in this work, we originally describe the use of pesticides as building blocks for the MOF construction, leading to a new type of agricultural applied MOFs (or AgroMOFs). Particularly, we have prepared a novel 2D-MOF (namely, GR-MOF-7) based on the herbicide glufosinate and the widely used antibacterial and fungicide Cu²⁺. GR-MOF-7 crystallizes attaining a monoclinic P2₁/c space group, and the asymmetric unit is composed of one independent Cu²⁺ ion and one molecule of the Glu^2- ligand. Considering the significant antibacterial activity of Cu-based compounds in agriculture, the potential combined bactericidal and herbicidal effect of GR-MOF-7 was investigated. GR-MOF-7 shows an important antibacterial activity against Staphylococcus aureus and Escherichia coli (involved in agricultural animal infections), improving the results obtained with its individual or even physical mixed precursors [glufosinate and Cu(NO₃)₂]. It is also an effective pesticide against germination and plant growth of the weed Raphanus sativus, an invasive species in berries and vines crops, demonstrating that the construction of MOFs based on herbicide and antibacterial/antifungal units is a promising strategy to achieve multifunctional agrochemicals. To the best of our knowledge, this first report on the synthesis of an MOF based on agrochemicals (what we have named AgroMOF) opens new ways on the safe and efficient MOF application in agriculture.

Metal-Organic Frameworks in Agriculture

Agrochemicals, which are crucial to meet the world food qualitative and quantitative demand, are compounds used to kill pests (insects, fungi, rodents, or unwanted plants). Regrettably, there are some important issues associated with their widespread and extensive use (e.g., contamination, bioaccumulation, and development of pest resistance); thus, a reduced and more controlled use of agrochemicals and thorough detection in food, water, soil, and fields are necessary. In this regard, the development of new functional materials for the efficient application, detection, and removal of agrochemicals is a priority. Metal-organic frameworks (MOFs) with exceptional sorptive, recognition capabilities, and catalytical properties have very recently shown their potential in agriculture. This Review emphasizes the recent advances in the use of MOFs in agriculture through three main views: environmental remediation, controlled agrochemical release, and detection of agrochemicals.

Essential Oils and Their Individual Components in Cosmetic Products

The current consumer demands together with the international regulations have pushed the cosmetic industry to seek new active ingredients from natural renewable sources for manufacturing more eco-sustainability and safe products, with botanical extract being an almost unlimited source of these new actives. Essential oils (EOs) emerge as very common natural ingredients in cosmetics and toiletries as a result of both their odorous character for the design and manufacturing of fragrances and perfumes, and the many beneficial properties of their individual components (EOCs), e.g., anti-inflammatory, antimicrobial and antioxidant properties, and, nowadays, the cosmetic industry includes EOs or different mixtures of their individual components (EOCs), either as active ingredients or as preservatives, in various product ranges (e.g., moisturizers, lotions and cleanser in skin care cosmetics; conditioners, masks or antidandruff products in hair care products; lipsticks, or fragrances in perfumery). However, the unique chemical profile of each individual essential oil is associated with different benefits, and hence it is difficult to generalize their potential applications in cosmetics and toiletries, which often require the effort of formulators in seeking suitable mixtures of EOs or EOCs for obtaining specific benefits in the final products. This work presents an updated review of the available literature related to the most recent advances in the application of EOs and EOCs in the manufacturing of cosmetic products. Furthermore, some specific aspects related to the safety of EOs and EOCs in cosmetics will be discussed. It is expected that the information contained in this comprehensive review can be exploited by formulators in the design and optimization of cosmetic formulations containing botanical extracts.

Advances in Controlled-Release Pesticide Formulations with Improved Efficacy and Targetability

Pesticides are commonly used in modern agriculture and are important for global food security. However, postapplication losses due to degradation, photolysis, evaporation, leaching, surface runoff, and other processes may substantially reduce their efficacy. Controlled-release formulations can achieve the permeation-regulated transfer of an active ingredient from a reservoir to a target surface. Thus, they can maintain an active ingredient at a predetermined concentration for a specified period. This can reduce degradation and dissipation and other losses and has the potential to improve efficacy. Recent developments in controlled-release technology have adapted the concepts of intelligence and precision from the pharmaceutical industry. In this review, we present recent advances in the development of controlled-release formulations and discuss details of the preparation methods, material improvements, and application technologies.

Smart nanomaterial and nanocomposite with advanced agrochemical activities

Conventional agriculture solely depends upon highly chemical compounds that have negatively ill-affected the health of every living being and the entire ecosystem. Thus, the smart delivery of desired components in a sustainable manner to crop plants is the primary need to maintain soil health in the upcoming years. The premature loss of growth-promoting ingredients and their extended degradation in the soil increases the demand for reliable novel techniques. In this regard, nanotechnology has offered to revolutionize the agrotechnological area that has the imminent potential over conventional agriculture and helps to reform resilient cropping systems withholding prominent food security for the ever-growing world population. Further, in-depth investigation on plant-nanoparticles interactions creates new avenues toward crop improvement via enhanced crop yield, disease resistance, and efficient nutrient utilization. The incorporation of nanomaterial with smart agrochemical activities and establishing a new framework relevant to enhance efficacy ultimately help to address the social acceptance, potential hazards, and management issues in the future. Here, we highlight the role of nanomaterial or nanocomposite as a sustainable as well stable alternative in crop protection and production. Additionally, the information on the controlled released system, role in interaction with soil and microbiome, the promising role of nanocomposite as nanopesticide, nanoherbicide, nanofertilizer, and their limitations in agrochemical activities are discussed in the present review.

Hollow structures as drug carriers: Recognition, response, and release

Hollow structures have demonstrated great potential in drug delivery owing to their privileged structure, such as high surface-to-volume ratio, low density, large cavities, and hierarchical pores. In this review, we provide a comprehensive overview of hollow structured materials applied in targeting recognition, smart response, and drug release, and we have addressed the possible chemical factors and reactions in these three processes. The advantages of hollow nanostructures are summarized as follows: hollow cavity contributes to large loading capacity; a tailored structure helps controllable drug release; variable compounds adapt to flexible application; surface modification facilitates smart responsive release. Especially, because the multiple physical barriers and chemical interactions can be induced by multishells, hollow multishelled structure is considered as a promising material with unique loading and releasing properties. Finally, we conclude this review with some perspectives on the future research and development of the hollow structures as drug carriers.

Endophytic Nanotechnology: An Approach to Study Scope and Potential Applications

Nanotechnology has become a very advanced and popular form of technology with huge potentials. Nanotechnology has been very well explored in the fields of electronics, automobiles, construction, medicine, and cosmetics, but the exploration of nanotecnology's use in agriculture is still limited. Due to climate change, each year around 40% of crops face abiotic and biotic stress; with the global demand for food increasing, nanotechnology is seen as the best method to mitigate challenges in disease management in crops by reducing the use of chemical inputs such as herbicides, pesticides, and fungicides. The use of these toxic chemicals is potentially harmful to humans and the environment. Therefore, using NPs as fungicides/ bactericides or as nanofertilizers, due to their small size and high surface area with high reactivity, reduces the problems in plant disease management. There are several methods that have been used to synthesize NPs, such as physical and chemical methods. Specially, we need ecofriendly and nontoxic methods for the synthesis of NPs. Some biological organisms like plants, algae, yeast, bacteria, actinomycetes, and fungi have emerged as superlative candidates for the biological synthesis of NPs (also considered as green synthesis). Among these biological methods, endophytic microorganisms have been widely used to synthesize NPs with low metallic ions, which opens a new possibility on the edge of biological nanotechnology. In this review, we will have discussed the different methods of synthesis of NPs, such as top-down, bottom-up, and green synthesis (specially including endophytic microorganisms) methods, their mechanisms, different forms of NPs, such as magnesium oxide nanoparticles (MgO-NPs), copper nanoparticles (Cu-NPs), chitosan nanoparticles (CS-NPs), β-d-glucan nanoparticles (GNPs), and engineered nanoparticles (quantum dots, metalloids, nonmetals, carbon nanomaterials, dendrimers, and liposomes), and their molecular approaches in various aspects. At the molecular level, nanoparticles, such as mesoporous silica nanoparticles (MSN) and RNA-interference molecules, can also be used as molecular tools to carry genetic material during genetic engineering of plants. In plant disease management, NPs can be used as biosensors to diagnose the disease.

Organic Hollow Mesoporous Silica as a Promising Sandalwood Essential Oil Carrier

As film-forming agents, fillers and adsorbents, microplastics are often added to daily personal care products. Because of their chemical stability, they remain in the environment for thousands of years, endangering the safety of the environment and human health. Therefore, it is urgent to find an environmentally friendly substitute for microplastics. Using n-octyltrimethoxysilane (OTMS) and tetraethoxysilane (TEOS) as silicon sources, a novel, environmentally friendly, organic hollow mesoporous silica system is designed with a high loading capacity and excellent adsorption characteristics in this work. In our methodology, sandalwood essential oil (SEO) was successfully loaded into the nanoparticle cavities, and was involved in the formation of Pickering emulsion as well, with a content of up to 40% (w/w). The developed system was a stable carrier for the dispersion of SEO in water. This system can not only overcome the shortcomings of poor water solubility and volatility of sandalwood essential oil, but also act as a microplastic substitute with broad prospects in the cosmetics and personal care industry, laying a foundation for the preparation and applications of high loading capacity microcapsules in aqueous media.

Fabrication a controlled-release pesticide for improving UV-shielding properties and reducing toxicity via coating polydopamine

Controlled-release formulations (CRFs) have potential applications in modern agriculture, for it can not only prolong the duration of agrochemicals but also alleviate the adverse effect on non-target organism. In this study, we constructed pyraclostrobin@SiO₂@polydopamine microcapsule (Pyr@SiO₂@PDA MC). The resulting microcapsule is a near-rod shape (about 1.15 μm), which has a drug-loading efficiency of 55%. Fourier transform infrared (FTIR) and thermogravimetric analysis (TG) revealed the successful entrapment of the pesticide. The coating of polydopamine (PDA) endowing the microcapsule with superior UV-shielding properties than pyraclostrobin@SiO₂ microcapsule (Pyr@SiO₂ MC). Compared with pyraclostrobin emulsifiable concentrate (EC), the Pyr@SiO₂@PDA MC exhibited 9.07-, 5.50-, 4.93- and 4.16-fold higher fungicidal activity against Rice blast fungus (Pyricularia oryzae) at concentrations of 0.5, 1, 2 and 4 mg/L. Moreover, acute toxicity tests demonstrated that the sample on zebrafish with lower toxicity on the first day. These results showed that the obtained microcapsule may process broader application potential in agriculture.

Application of Core/Shell Nanoparticles in Smart Farming: A Paradigm Shift for Making the Agriculture Sector More Sustainable

Modern agriculture has entered an era of technological plateau where intervention of smarter technology like nanotechnology is imminently required for making this sector economically and environmentally sustainable. Throughout the world, researchers are trying to exploit the novel properties of several nanomaterials to make agricultural practices more efficient. Core/shell nanoparticles (CSNs) have attracted much attention because of their multiple attractive novel features like high catalytic, optical, and electronic properties for which they are being widely used in sensing, imaging, and medical applications. Though it also has the promise to solve a number of issues related to agriculture, its full potential still remains mostly unexplored. This review provides a panoramic view on application of CSNs in solving several problems related to crop production and precision farming practices where the wastage of resources can be minimized. This review also summarizes different classes of CSNs and their synthesis techniques. It emphasizes and analyzes the probable potential applications of CSNs in the field of crop improvement and crop protection, detection of plant diseases and agrochemical residues, and augmentation of chloroplast mediated photosynthesis. In a nutshell, there is enormous scope to formulate and design CSN-based smart tools for applications in agriculture, making this sector more sustainable.

Emulsions containing essential oils, their components or volatile semiochemicals as promising tools for insect pest and pathogen management

Most of the traditional strategies used for facing the management of insect pest and diseases have started to fail due to different toxicological issues such as the resistance of target organism and the impact on environment and human health. This has made mandatory to seek new effective strategies, which minimize the risks and hazards without compromising the effectiveness of the products. The use of essential oils, their components and semiochemicals (pheromones and allelochemicals) has become a promising safe and eco-sustainable alternative for controlling insect pest and pathogens. However, the practical applications of this type of molecules remain rather limited because their high volatility, poor solubility in water and low chemical stability. Therefore, it is required to design strategies enabling their use without any alteration of their biological and chemical properties. Oil-in-water nano/microemulsions are currently considered as promising tools for taking advantage of the bioactivity of essential oils and their components against insects and other pathogens. Furthermore, these colloidal systems also allows the encapsulation and controlled release of semiochemicals, which enables their use in traps for monitoring, trapping or mating disruption of insects, and in push-pull strategies for their behavioral manipulation. This has been possible because the use of nano/microemulsions allows combining the protection provided by the hydrophobic environment created within the droplets with the enhanced dispersion of the molecules in an aqueous environment, which favors the handling of the bioactive molecules, and limits their degradation, without any detrimental effect over their biological activity. This review analyzes some of the most recent advances on the use of emulsion-like dispersions as a tool for controlling insect pest and pathogens. It is worth noting that even though the current physico-chemical knowledge about these systems is relatively poor, a deeper study of the physico-chemical aspects of nanoemulsions/microemulsions containing essential oils, their components or semiochemicals, may help for developing most effective formulations, enabling the generalization of their use.

Biomimetic core-shell silica nanoparticles using a dual-functional peptide

Biomimetic nanomaterials have attracted tremendous research interest in the past decade. We recently developed biomimetic core-shell nanoparticles - silica nanocapsules, using a designer dual-functional peptide SurSi under room temperature, neutral pH and without use of any toxic reagents or chemicals. The SurSi peptide is designed capable of not only stabilizing nanoemulsions because of its excellent surface activity, but also inducing the formation of silica through biosilicification at an oil-water interface. However, it remains challenging to precisely control the peptide-induced nucleation and biosilicification specifically at the oil-water interface, thus forming oil-core silica-shell nanocapsules with uniform size and monodispersity. In this study, the fundamental mechanism of silica formation through a peptide catalyzed biosilicification was systematically investigated, so that the formation of oil-core silica-shell nanocapsules can be precisely controlled. The SurSi peptide induced hydrolysis and nucleation of biomineralized silica particles were monitored to study the biosilicification kinetics. Effects of pH, SurSi peptide concentration and pre-hydrolysis of silica precursors were also studied to optimize the formation of biomimetic silica nanocapsules. The fundamental understanding achieved through these systematic studies provides valuable insights for making core-shell nanoparticles via controlling nucleation and reaction at interfaces.

Self-Assembled Surfactant-Templated Synthesis of Porous Hollow Silica Nanoparticles: Mechanism of Formation and Feasibility of Post-Synthesis Nanoencapsulation

SiO₂ is bioinert and highly functionalizable, thus making it a very attractive material for nanotechnology applications such as drug delivery and nanoencapsulation of pesticides. Herein, we synthesized porous hollow SiO₂ nanoparticles (PHSNs) by using cetyltrimethylammonium bromide (CTAB) and Pluronic P123 as the structure-directing agents. The porosity and hollowness of the SiO₂ structure allow for the protective and high-density loading of molecules of interest inside the nanoshell. We demonstrate here that loading can be achieved post-synthesis through the pores of the PHSNs. The PHSNs are monodisperse with a mean diameter of 258 nm and a specific surface area of 287 m² g^-1. The mechanism of formation of the PHSNs was investigated using 1-D and 2-D solid-state nuclear magnetic resonance (SS-NMR) and Fourier-transform infrared spectroscopy (FTIR). The data suggest that CTAB and Pluronic P123 interact, forming a hydrophobic spherical hollow cage that serves as a template for the porous hollow structure. After synthesis, the surfactants were removed by calcination at 550 °C and the PHSNs were added to an Fe³⁺ solution followed by addition of the reductant NaBH₄ to the suspension, which led to the formation of Fe(0) NPs both on the PHSNs and inside the hollow shell, as confirmed by transmission electron microscopy imaging. The imaging of the formation of Fe(0) NPs inside the hollow shell provides direct evidence of transport of solute molecules across the shell and their reactions within the PHSNs, making it a versatile nanocarrier and nanoreactor.

Temperature-Responsive Pyraclostrobin-Loaded Octadecane Submicrocapsules with Lowered Toxicity

Pyraclostrobin (Pyr) is one of the most effective fungicides. However, it can degrade via photolysis in water, it is toxic to aquatic life and if inhaled, it has a low solubility in water, that leads to difficulties when applying to plants by spraying. Additionally, the necessity of repeated (weekly) sprays of fungicides when the pathogen growth risk is the highest, such as at the temperature range of 24 to 36 °C and increased humidity of about 95%, leads to loss of efficiency of the fungicide and overdose of chemicals. In the present study, pyraclostrobin was microencapsulated to solve the abovementioned issues. As a core of capsules octadecane (OD) with a melting point of 28 °C was used, thus, the release of pyraclostrobin was controlled via temperature change. Pyraclostrobin-loaded submicrocapsules (PyrSMCs) were characterized using SEM, DLS, TGA/DSC, HPLC, FTIR methods; stimuli-responsivity was tested employing in vitro tests with pathogenic culture (Fungal strain of Pyrenophora teres - CPPF-453) grown in Petri dishes. Toxicity of PyrSMCs to Artemia salina was studied as well. Size of capsules was 200–600 nm along with the presence of bigger capsules with a diameter of 1–4 µm. PyrSMCs showed excellent antifungal effects above the melting point of octadecane. PyrSMCs demonstrated 29 times less toxicity than pyraclostrobin of technical grade. Overall, results show the potential of such capsules to be applied in the agricultural industry for precise agriculture strategies.

Silica Nanoparticles for Insect Pest Control

To date, control strategies used against insect pest species are based on synthetic insecticide applications. In addition, the efficacy of these treatments could be decreased due to insecticide resistance in insect populations. Also, the irrational use of chemical control strategies has negative consequences of non-target organisms and threatening human health. Designing nanomaterial for pest insect control is a promising alternative to traditional insecticide formulations. In particular, it has been proven that silica nanoparticles have the potential for molecules delivery, release control improvement and also their toxicity as insecticide alone. In this work, we summarized the state of knowledge on silica nanoparticles (SiNPs) used in pest insect management. Besides, aspects of their synthesis, mode of action, and toxic effects on non-target organisms and environment are reviewed.

Rapid and efficient removal of acetochlor from environmental water using Cr-MIL-101 sorbent modified with 3, 5-Bis(trifluoromethyl)phenyl isocyanate

The excessive use of acetochlor (ACT), a commonly used herbicide with latent endocrine disrupting functions, causes surface water pollution. The efficient removal of ACT from contaminated water supplies is of paramount importance. In the current work, 3,5-Bis(trifluoromethyl)phenyl isocyanate (BTP) was successfully anchored onto Cr-MIL-101 walls via covalent incorporation to afford Cr-MIL-101-BTP as a novel adsorbent for the high-efficiency removal of ACT in aqueous solutions. The kinetic adsorption process, adsorption isotherms, adsorbent regeneration, and key parameters, such as adsorbent dosage, pH value, and ionic strength, for the adsorption of ACT were studied. Results showed that a pseudo-second-order rate equation effectively describes the adsorption kinetics. The Langmuir model exhibited a better fit to adsorption isotherm than the Freundlich model. Given the π-π stacking and hydrogen bond interaction, the adsorption capacity in Cr-MIL-101-BTP approached a maximum of 312.5 mg/g for ACT, which was considerably higher than the adsorption capacities of many other reported adsorbents. The excellent adsorption characteristics of Cr-MIL-101-BTP toward ACT were preserved in a wide pH range and high concentration of background electrolytes. In addition, the result showed that partition coefficient (PC) of Cr-MIL-101-BTP was 356.14 mg/g/μM at 5 mg/L of ACT concentration, which was found as the outperformer in all tested subjects. The ACT adsorption capacity of Cr-MIL-101-BTP at the breakthrough point was greatly influenced by initial concentration, and could be described by the Thomas model. Regeneration experiments indicated that the Cr-MIL-101-BTP was recycled at least six times without significant loss of adsorption capacity. Moreover, Cr-MIL-101-BTP did not show cytotoxic activity against the tested HepG2 cell lines and did not pose serious risks to Daphnia carinata survival (48 h LC₅₀ = 446.6 μg/mL). These results prefigured the promising potential of Cr-MIL-101-BTP as a novel adsorbent for the efficient removal of ACT from aqueous solutions.

High foliar affinity cellulose for the preparation of efficient and safe fipronil formulation

In this work, fipronil was encapsulated within ethanediamine-modified carboxymethylcellulose (ACMC) to prepare an efficient and environmentally safe pesticide formulation (ACMCF). The chemical structure, morphology, foliar adhesion, bioactivity, and soil mobility of ACMCF were also systematically investigated. Results demonstrated that fipronil was encapsulated to form microcapsules successfully. Compared with the traditional fipronil emulsion (FE), ACMCF had a relatively high retention rate on cucumber and peanut leaves. The acute contact toxicity of ACMCF (LD₅₀ = 0.151 μg a.i./bee) toward Apis mellifera was far lower than that of FE (LD₅₀ = 0.00204 μg a.i./bee). Biological activity surveys confirmed that ACMCF has insecticidal ability against Plutella xylostella similar to that of FE. Moreover, the leaching and migration properties of ACMCF in three different kinds soils were weaker than those of FE. These results imply that ACMCF has promising application potential in increasing the effective utilization of fipronil and reducing risk to non-target organisms and the environment.

Porous Inorganic and Hybrid Systems for Drug Delivery: Future Promise in Combatting Drug Resistance and Translation to Botanical Applications

BACKGROUND

Porous micro- and nanoparticles have the capacity to encapsulate a large quantity of therapeutics, making them promising delivery vehicles for a variety of applications. This review aims to highlight the latest development of inorganic and hybrid (inorganic/ organic) particles for drug delivery with an additional emphasis on combatting drug resistant cancer. We go one step further and discuss delivery applications beyond medicinal delivery, as there is generally a translation from medicinal delivery to botanic delivery after a short lag time.

METHODS

We undertook a search of relevant peer-reviewed publications. The quality of the relevant papers was appraised using standard tools. The characteristics of the papers are described herein, and the relevant material and therapeutic properties are discussed.

RESULTS

We discuss 4 classes of porous particles in terms of drug delivery and theranostics. We specifically focus on silica, calcium carbonate, metal-phenolic network, and metalorganic framework particles. Other relevant biomedically relevant applications are discussed and we highlight outstanding therapeutic results in the relevant literature.

CONCLUSION

The findings of this review confirm the importance of studying and utilizing porous particles for therapeutic delivery. Moreover, we show that the properties of porous particles that make them promising for medicinal drug delivery also make them promising candidates for agro-industrial applications.

Synthesis, Characterization, and Pesticidal Activity of Emamectin Benzoate Nanoformulations against Phenacoccus solenopsis Tinsley (Hemiptera: Pseudococcidae)

Using nanotechnology to develop new formulations of pesticides is considered a possible option in enhancing the efficiency, safety, and photostability of pesticides under various climatic conditions. In the present study, two novel nanoformulations (NFs) were successfully prepared based on nano-delivery systems for emamectin benzoate (EMB) by loading it on cellulose nanocrystals (CNCs) and silicon dioxide nanoparticles (SNPs) as carriers through a freeze-drying method. The synthesized nanoformulations were examined using field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), and dynamic light scattering (DLS). The results showed that SNPs and CNCs had a loading efficiency of 43.31% and 15.04% (w/w) for EMB, respectively, and could effectively protect EMB from photolysis under UV radiation. The LC50 values for EMB + SNPs, EMB + CNCs, and EMB commercial formulation against Phenacoccus solenopsis were 0.01, 0.05, and 0.31 μg/mL, respectively, indicating that both NFs were more effective than the EMB commercial formulation. This work seeks to develop new nano-carriers for potential applications of pesticides in plant protection, which will reduce the recommended dose of pesticides and thereby decrease the amount of pesticide residue in food and the environment.

Evaluation of baiting fipronil-loaded silica nanocapsules against termite colonies in fields

Various pesticide nanocarriers have been developed. However, their pest-control applications remain limited in laboratories. Herein, we developed silica nanocapsules encapsulating fipronil (SNC) and their engineered form, poly(ethyleneimine)-coated SNC (SNC-PEI), based on recombinant catalytic modular protein D4S2 and used them against termite colonies Coptotermes lacteus in fields. To achieve this, an integrated biomolecular bioprocess was developed to produce D4S2 for manufacturing SNC containing fipronil with high encapsulation efficiency of approximately 97% at benign reaction conditions and at scales sufficient for the field applications. PEI coating was achieved via electrostatic interactions to yield SNC-PEI with a slower release of fipronil than SNC without coating. As a proof-of-concept, bait toxicants containing varied fipronil concentrations were formulated and exposed to nine termite mounds, aiming to prolong fipronil release hence allowing sufficient time for termites to relocate the baits into and distribute throughout the colony, and to eliminate that colony. Some baits were relocated into the mounds, but colonies were not eliminated due to several reasons. We caution others interested in producing bait toxicants to be aware of the multilevel resistance mechanisms of the Coptotermes spp. "superorganism".

Sulfonate-Functionalized Mesoporous Silica Nanoparticles as Carriers for Controlled Herbicide Diquat Dibromide Release through Electrostatic Interaction

Environmental stimuli-responsive pesticide release is desirable for enhanced efficiency and reduced side effects. In most cases, the loading and release of pesticides mainly depends on hydrophobic interactions and hydrogen bonding. Electrostatic interaction is less investigated as a weapon for achieving high loading content and controlled pesticide release. In this work, negative-charge decorated mesoporous silica nanoparticles (MSNs) were facilely fabricated by introducing sulfonate groups onto MSNs through a post-grafting method. Sulfonate-functionalized MSNs (MSN-SO₃) were synthesized by conversion of epoxy group into sulfonate group using a bisulfite ion as a ring opening reagent. Diquat dibromide (DQ), one of the globally used quaternary ammonium herbicides, was efficiently loaded into these negatively charged MSN-SO₃ nanoparticles. The loading content was increased to 12.73% compared to those using bare MSNs as carriers (5.31%). The release of DQ from DQ@MSN-SO₃ nanoparticles was pH and ionic strength responsive, which was chiefly governed by the electrostatic interactions. Moreover, DQ@MSN-SO₃ nanoparticles exhibited good herbicidal activity for the control of Datura stramonium L., and the bioactivity was affected by the ionic strength of the release medium. The strategy of cargo loading and release dependent on the electrostatic interactions could be generally used for charge-carrying pesticides using carriers possessing opposite charges to mitigate the potential negative impacts on the environment.

Nano-based smart pesticide formulations: Emerging opportunities for agriculture

The incorporation of nanotechnology as a means for nanopesticides is in the early stage of development. The main idea behind this incorporation is to lower the indiscriminate use of conventional pesticides to be in line with safe environmental applications. Nanoencapsulated pesticides can provide controlled release kinetics, while efficiently enhancing permeability, stability, and solubility. Nanoencapsulation can enhance the pest-control efficiency over extended durations by preventing the premature degradation of active ingredients (AIs) under harsh environmental conditions. This review is thus organized to critically assess the significant role of nanotechnology for encapsulation of AIs for pesticides. The smart delivery of pesticides is essential to reduce the dosage of AIs with enhanced efficacy and to overcome pesticide loss (e.g., due to leaching and evaporation). The future trends of pesticide nanoformulations including nanomaterials as AIs and nanoemulsions of biopesticides are also explored. This review should thus offer a valuable guide for establishing regulatory frameworks related to field applications of these nano-based pesticides in the near future.

Nanotechnology for Plant Disease Management

Each year, 20%–40% of crops are lost due to plant pests and pathogens. Existing plant disease management relies predominantly on toxic pesticides that are potentially harmful to humans and the environment. Nanotechnology can offer advantages to pesticides, like reducing toxicity, improving the shelf-life, and increasing the solubility of poorly water-soluble pesticides, all of which could have positive environmental impacts. This review explores the two directions in which nanoparticles can be utilized for plant disease management: either as nanoparticles alone, acting as protectants; or as nanocarriers for insecticides, fungicides, herbicides, and RNA-interference molecules. Despite the several potential advantages associated with the use of nanoparticles, not many nanoparticle-based products have been commercialized for agricultural application. The scarcity of commercial applications could be explained by several factors, such as an insufficient number of field trials and underutilization of pest–crop host systems. In other industries, nanotechnology has progressed rapidly, and the only way to keep up with this advancement for agricultural applications is by understanding the fundamental questions of the research and addressing the scientific gaps to provide a rational and facilitate the development of commercial nanoproducts.

Core-Shell Interface-Oriented Synthesis of Bowl-Structured Hollow Silica Nanospheres Using Self-Assembled ABC Triblock Copolymeric Micelles

Hollow porous silica nanospheres (HSNs) are emerging classes of cutting-edge nanostructured materials. They have elicited much interest as carriers of active molecule delivery due to their amorphous chemical structure, nontoxic nature, and biocompatibility. Structural development with hierarchical morphology is mostly required to obtain the desired performance. In this context, large through-holes or pore openings on shells are desired so that the postsynthesis loading of active-molecule onto HSNs via a simple immersion method can be facilitated. This study reports the synthesis of HSNs with large through-holes or pore openings on shells, which are subsequently termed bowl-structured hollow porous silica nanospheres (BHSNs). The synthesis of BHSNs was mediated by the core-shell interfaces of the core-shell corona-structured micelles obtained from a commercially available ABC triblock copolymer (polystyrene- b-poly(2-vinylpyridine)- b-poly(ethylene oxide) (PS-P2VP-PEO)). In this synthesis process, polymer@SiO₂ composite structure was formed because of the deposition of silica (SiO₂) on the micelles' core. The P2VP block played a significant role in the hydrolysis and condensation of the silica precursor, i.e., tetraethylorthosilicate (TEOS) and then maintaining the shell's growth. The PS core of the micelles built the void spaces. Transmission electron microscopy (TEM) images revealed a spherical hollow structure with an average particle size of 41.87 ± 3.28 nm. The average diameter of void spaces was 21.71 ± 1.22 nm, and the shell thickness was 10.17 ± 1.68 nm. According to the TEM image analysis, the average large pore was determined to be 15.95 nm. Scanning electron microscopy (SEM) images further confirmed the presence of large single pores or openings in shells. These were formed as a result of the accumulated ethanol on the PS core acting to prevent the growth of silica.

A critical evaluation of nanopesticides and nanofertilizers against their conventional analogues

Among a wide range of possible applications of nanotechnology in agriculture, there has been a particular interest in developing novel nanoagrochemicals. While some concerns have been expressed regarding altered risk profile of the new products, many foresee a great potential to support the necessary increase in global food production in a sustainable way. A critical evaluation of nanoagrochemicals against conventional analogues is essential to assess the associated benefits and risks. In this assessment, recent literature was critically analysed to determine the extent to which nanoagrochemicals differ from conventional products. Our analysis was based on 78 published papers and shows that median gain in efficacy relative to conventional products is about 20-30%. Environmental fate of agrochemicals can be altered by nanoformulations, but changes may not necessarily translate in a reduction of the environmental impact. Many studies lacked nano-specific quality assurance and adequate controls. Currently, there is no comprehensive study in the literature that evaluates efficacy and environmental impact of nanoagrochemicals under field conditions. This is a crucial knowledge gap and more work will thus be necessary for a sound evaluation of the benefits and new risks that nanoagrochemicals represent relative to existing products.

Pesticidal Activity of Nanostructured Metal Oxides for Generation of Alternative Pesticide Formulations

Herein, nanostructured metal oxides of essential soil nutrient elements (i.e., CuO and CaO) with definite shape and size were simply synthesized, and their pesticidal activities against cotton leafworm ( Spodoptera littoralis) were explored for the first time. These metal oxide nanostructures represented novel economic and ecofriendly nanopesticides for sustainable plant protection and might boost the nutrient content of soil. The results showed that CuO nanoparticles (NPs) and CaO NPs exhibited potential entomotoxic effects against S. littoralis. Interestingly, CuO NPs exhibited fast entomotoxic effect with LC50 = 232.75 mg/L after 3 days, while CaO NPs showed a slow entomotoxic effect with LC50 = 129.03 mg/L after 11 days of post-treatments. The difference in the pesticidal activity of the metal oxides is related to their physical characteristics and interfacial surfaces upon insect midgut and cuticle layer of insect body wall. Thus, nanoengineered metal oxides might be utilized to generate an alternative and cost-effective pesticide formulation in the near future.

Controlled release for crop and wood protection: Recent progress toward sustainable and safe nanostructured biocidal systems

We review biocide delivery systems (BDS), which are designed to deter or control harmful organisms that damage agricultural crops, forests and forest products. This is a timely topic, given the growing socio-economical concerns that have motivated major developments in sustainable BDS. Associated designs aim at improving or replacing traditional systems, which often consist of biocides with extreme behavior as far as their solubility in water. This includes those that compromise or pollute soil and water (highly soluble or volatile biocides) or those that present low bioavailability (poorly soluble biocides). Major breakthroughs are sought to mitigate or eliminate consequential environmental and health impacts in agriculture and silviculture. Here, we consider the most important BDS vehicles or carriers, their synthesis, the environmental impact of their constituents and interactions with the active components together with the factors that affect their rates of release such as environmental factors and interaction of BDS with the crops or forest products. We put in perspective the state-of-the-art nanostructured carriers for controlled release, which need to address many of the challenges that exist in the application of BDS.

Synthesis and Characterization of Chlorpyrifos/Copper(II) Schiff Base Mesoporous Silica with pH Sensitivity for Pesticide Sustained Release

The salicylaldehyde-modified mesoporous silica (SA-MCM-41) was prepared through a co-condensation method. Through the bridge effect from the copper ion, which also acts as the nutrition of the plant, the model drug chlorpyrifos (CH) was supported on the copper(II) Schiff base mesoporous silica (Cu-MCM-41) to form a highly efficient sustained-release system (CH-Cu-MCM-41) for pesticide delivery. The experimental results showed that the larger the concentration of the copper ion, the more adsorption capacity (AC) of Cu-MCM-41 for chlorpyrifos and the smaller its release rate. The results confirmed the existence of a coordination bond between SA-MCM-41 and copper ions as well as a coordination bond between Cu-MCM-41 and chlorpyrifos. The AC of SA-MCM-41 is 106 mg/g, while that of Cu-MCM-41 is 295 mg/g. The as-synthesized system showed significant pH sensitivity. Under the condition of pH ≤ 7, the release rate of chlorpyrifos decreased with increasing pH, whereas its release rate in weak base conditions was slightly larger than that in weak acid conditions. Meanwhile, the drug release rate of the as-synthesized system was also affected by the temperature. Their sustained-release curves can be described by the Korsmeyer-Peppas equation.

Interfacial engineering for silica nanocapsules

Silica nanocapsules have attracted significant interest due to their core-shell hierarchical structure. The core domain allows the encapsulation of various functional components such as drugs, fluorescent and magnetic nanoparticles for applications in drug delivery, imaging and sensing, and the silica shell with its unique properties including biocompatibility, chemical and physical stability, and surface-chemistry tailorability provides a protection layer for the encapsulated cargo. Therefore, significant effort has been directed to synthesize silica nanocapsules with engineered properties, including size, composition and surface functionality, for various applications. This review provides a comprehensive overview of emerging methods for the manufacture of silica nanocapsules, with a special emphasis on different interfacial engineering strategies. The review starts with an introduction of various manufacturing approaches of silica nanocapsules highlighting surface engineering of the core template nanomaterials (solid nanoparticles, liquid droplets, and gas bubbles) using chemicals or biomolecules which are able to direct nucleation and growth of silica at the boundary of two-phase interfaces (solid-liquid, liquid-liquid, and gas-liquid). Next, surface functionalization of silica nanocapsules is presented. Furthermore, strategies and challenges of encapsulating active molecules (pre-loading and post-loading approaches) in these capsular systems are critically discussed. Finally, applications of silica nanocapsules in controlled release, imaging, and theranostics are reviewed.

Non-chromatographic bioprocess engineering of a recombinant mineralizing protein for the synthesis of silica nanocapsules

Inspired by nature, synthetic mineralizing proteins have been developed to synthesize various structures of silica-based nanomaterials under environmentally friendly conditions. However, the development of bioprocesses able to assist in the translation of these new materials has lagged the development of the materials themselves. The development of cost-effective and scalable bioprocesses which minimize reliance on chromatography to recover biomolecules from microbial cell factories remains a significant challenge. This paper reports a simplified purification process for a recently reported recombinant catalytic modular (D4S2) protein (M(DPSMKQLADS-LHQLARQ-VSRLEHA)₄ EPSRKKRKKRKKRKKGGGY; M 13.3 kDa; pI 10.9), which combines a variant of the established designer biosurfactant protein DAMP4 with a new biomimetic sequence (RKKRKKRKKRKKGGGY), providing for a bi-modular functionality (emulsification and biosilicification). The four-helix bundle structure of the protein has been demonstrated to remain stable and soluble under high temperature and high salt conditions, which confers simplified bioprocessing character. However, the high positive charge on the biosilification sequence necessitates removal of DNA contaminants from crude cell-extract at an early stage in the process by adding poly(ethyleneimine) (PEI). In this process, cellular protein contaminants were selectively precipitated by adding Na₂ SO₄ to the protein mixture up to a high concentration (1 M) and mixed at high temperature (90°C, 5 min) where D4S2 remained stable and soluble due to its four-helix bundle structure. Further increase of the Na₂ SO₄ concentration to 1.8 M precipitated, thus separated, D4S2 from residual PEI. The overall yield of the protein D4S2 was 28.8 mg per 800 mL cells (final cultivation OD₆₀₀ ∼2) which gives an approximate 79% D4S2-protein yield. In comparison with the previously reported chromatographic purification of D4S2 protein (Wibowo et al., 2015), the final yield of D4S2 protein is increased fourfold in this study. The bio-produced protein D4S2 was proved to retain it emulsification and biosilicification functionalities enabling the formation of oil-core silica-shell nanocapsules at near-neutral pH and room temperature without the use of any toxic organic solvents, confirming no adverse effects due to bioprocess simplification. This work demonstrates that, through proper bioprocess engineering including the removal of critical contaminants such as DNA, a more efficient, simple, and scalable purification process can be used for the high-yield bio-production of a recombinant templating protein useful in the synthesis of bio-inspired nanomaterials. This simplified process is expected to be easily adapted to recover other mineralizing helix bundle-based functional proteins from microbial cell factories. Biotechnol. Bioeng. 2017;114: 335-343. © 2016 Wiley Periodicals, Inc.

Quantitative Understanding of Nanoparticle Uptake in Watermelon Plants

The use of agrochemical-nutrient fertilizers has come under scrutiny in recent years due to concerns that they damage the ecosystem and endanger public health. Nanotechnology offers many possible interventions to mitigate these risks by use of nanofertilizers, nanopesticides, and nanosensors; and concurrently increases profitability, yields, and sustainability within the agricultural industry. Aerosol based foliar delivery of nanoparticles may help to enhance nanoparticle uptake and reduce environmental impacts of chemical fertilizers conventionally applied through a soil route. The purpose of this work was to study uptake, translocation, and accumulation of various gold nanostructures, 30-80 nm, delivered by aerosol application to a watermelon plant. Cellular uptake and accumulation of gold nanoparticles were quantified by Inductively Coupled Plasma-Mass Spectroscopy (ICP-MS). Observations suggested that nanoparticles could be taken up by the plant through direct penetration and transport through the stomatal opening. Observed translocation of nanoparticles from leaf to root shows evidence that nanoparticles travel by the phloem transport mechanism. Accumulation and transport of nanoparticles depend on nanoparticle shape, application method, and nature of plant tissues.

Silica-coated super-paramagnetic iron oxide nanoparticles (SPIONPs): a new type contrast agent of T1 magnetic resonance imaging (MRI)

Magnetic resonance imaging (MRI), a sophisticated promising three-dimensional tomographic noninvasive diagnostic technique, has an intrinsic advantage in safety compared with radiotracer and optical imaging modalities; however, MRI contrast agents are less sensitive than complexes used in other imaging techniques. Usually the clinically used Gd-based complexes MRI-T₁ contrast agents are toxic; therefore, the demand for nontoxic novel T₁-weighted MRI candidates with ultrasensitive imaging and advanced functionality is very high. In this research, silica-coated ultra-small monodispersed super-paramagnetic iron oxide nanoparticles were synthesized via a thermal decomposition method, which demonstrated themselves as a high performance T₁-weighted MRI contrast agent for heart, liver, kidney and bladder based on in vivo imaging analyses. Transmission electron microscopy (TEM) results illustrated that the diameter of the SPIONPs was in the range of 4 nm and the average size of Fe₃O₄@SiO₂ was about 30-40 nm. X-ray diffraction (XRD) and Raman spectroscopy analyses revealed the phase purity of the prepared SPIONPs. These magnetite nanoparticles exhibited a weak magnetic moment at room temperature because of the spin-canting effect, which promoted a high positive signal enhancement ability. MTT assays and histological analysis demonstrated good biocompatibility of the SPIONPs in vitro and in vivo. In addition, the silica-coated ultra-small (4 nm sized) magnetite nanoparticles exhibited a good r₁ relaxivity of 1.2 mM^-1 s^-1 and a low r₂/r₁ ratio of 6.5 mM^-1 s^-1. In vivo T₁-weighted MR imaging of heart, liver, kidney and bladder in mice after intravenous injection of nanoparticles further verified the high sensitivity and biocompatibility of the as-synthesized magnetite nanoparticles. These results reveal silica-coated SPIONPs as a promising candidate for a T₁ contrast agent with extraordinary capability to enhance MR images.