Cationic porphycenes as potential photosensitizers for antimicrobial photodynamic therapy

Refining antimicrobial photodynamic therapy: effect of charge distribution and central metal ion in fluorinated porphyrins on effective control of planktonic and biofilm bacterial forms

Antibiotic resistance represents a pressing global health challenge, now acknowledged as a critical concern within the framework of One Health. Photodynamic inactivation of microorganisms (PDI) offers an attractive, non-invasive approach known for its flexibility, independence from microbial resistance patterns, broad-spectrum efficacy, and minimal risk of inducing resistance. Various photosensitizers, including porphyrin derivatives have been explored for pathogen eradication. In this context, we present the synthesis, spectroscopic and photophysical characteristics as well as antimicrobial properties of a palladium(II)-porphyrin derivative (PdF2POH), along with its zinc(II)- and free-base counterparts (ZnF2POH and F2POH, respectively). Our findings reveal that the palladium(II)-porphyrin complex can be classified as an excellent generator of reactive oxygen species (ROS), encompassing both singlet oxygen (Φ△ = 0.93) and oxygen-centered radicals. The ability of photosensitizers to generate ROS was assessed using a variety of direct (luminescence measurements) and indirect techniques, including specific fluorescent probes both in solution and in microorganisms during the PDI procedure. We investigated the PDI efficacy of F2POH, ZnF2POH, and PdF2POH against both Gram-negative and Gram-positive bacteria. All tested compounds proved high activity against Gram-positive species, with PdF2POH exhibiting superior efficacy, leading to up to a 6-log reduction in S. aureus viability. Notably, PdF2POH-mediated PDI displayed remarkable effectiveness against S. aureus biofilm, a challenging target due to its complex structure and increased resistance to conventional treatments. Furthermore, our results show that PDI with PdF2POH is more selective for bacterial than for mammalian cells, particularly at lower light doses (up to 5 J/cm2 of blue light illumination). This enhanced efficacy of PdF2POH-mediated PDI as compared to ZnF2POH and F2POH can be attributed to more pronounced ROS generation by palladium derivative via both types of photochemical mechanisms (high yields of singlet oxygen generation as well as oxygen-centered radicals). Additionally, PDI proved effective in eliminating bacteria within S. aureus-infected human keratinocytes, inhibiting infection progression while preserving the viability and integrity of infected HaCaT cells. These findings underscore the potential of metalloporphyrins, particularly the Pd(II)-porphyrin complex, as promising photosensitizers for PDI in various bacterial infections, warranting further investigation in advanced infection models.

Photodynamic therapy for treatment of burns: A system review and meta-analysis of animal study

BACKGROUND AND AIM

Burns are common in both everyday life and war. Shock, infection, and organ dysfunction are major complications, among which infection is the most common and has the highest mortality rate. The aim of this study was to evaluate the effect of photodynamic therapy(PDT) on animals suffering from burns.

METHODS

Through searching Embase, PubMed, Web of Science, and the Cochrane Library, only controlled trials were collected to study the effects of PDT on animals with burns. The included studies were evaluated for methodological quality by the MINORS (Methodological Index for Non-Randomized Studies) assessment tool, and the data analysis software was used to analyze the data accordingly.

RESULTS

16 articles were collected between the earliest available date and August 2022. The results of the meta-analysis showed that PDT effectively reduces TNF-α and IL-6 levels in wounds, and increases bFGF and VEGF levels, PDT can also reduce bacterial colonization at the injury site, accelerate the healing of burn wounds, and improve the survival rate.

CONCLUSION

PDT has been shown to have positive effects as a treatment for animals suffering from burns. It affects the levels of cytokines, reduces bacterial counts in wounds, promotes wound healing, and improves animal survival rates.

Folate-assisted targeted photocytotoxicity of red-light-activable iron(III) complex co-functionalized gold nanoconjugates (Fe@FA-AuNPs) against HeLa and triple-negative MDA-MB-231 cancer cells

Photo-redox chemistry resulting from ligand to metal charge transfer in red-light-activable iron(III) complexes could be a potent strategic tool for next-generation photochemotherapeutic applications. Herein, we developed an iron(III) complex and folate co-functionalized gold nanoconjugate (Fe@FA-AuNPs) and thoroughly characterized it with NMR, ESI MS, UV-visible, EPR, EDX, XPS, powder X-ray diffraction, TEM and DLS studies. There was a remarkable shift in the SPR band of AuNPs to 680 nm, and singlet oxygen (1O2) and hydroxyl radicals were potently generated upon red-light activation, which were probed by UV-visible and EPR spectroscopic assays. Cellular uptake studies of the nanoconjugate (Fe@FA-AuNPs) revealed significantly higher uptake in folate(+) cancer cells (HeLa and MDA-MB-231) than folate(-) (A549) cancer cells or normal cells (HPL1D), indicating the targeting potential of the nanoconjugate. Confocal imaging indicated primarily mitochondrial localization. The IC50 values of the nanoconjugate determined from a cell viability assay in HeLa, MDA-MB-231, and A549 cells were 27.83, 39.91, and 69.54 μg mL-1, respectively in red light, while in the dark the values were >200 μg mL-1; the photocytotoxicity was correlated with the cellular uptake of the nanoconjugate. The nanocomposite exhibited similar photocytotoxicity (IC50 in red light, 37.35 ± 8.29 μg mL-1 and IC50 in the dark, >200 μg mL-1). Mechanistic studies revealed that intracellular generation of ROS upon red-light activation led to apoptosis in HeLa cells. Scratch-wound-healing assays indicated the inhibition of the migration of MDA-MB-231 cells treated with the nanoconjugate and upon photo-activation. Overall, the nanoconjugate has emerged as a potent tool for next-generation photo-chemotherapeutics in the clinical arena of targeted cancer therapy.

Evaluation of antibacterial effect of a cationic porphyrin derivative on Pseudomonas aeruginosa in photodynamic therapy

BACKGROUND

Pseudomonas aeruginosa is a gram-negative bacterium without spores, and it is one of the pathogens that easily cause secondary infectious diseases when human immune function is low. The purpose of this study is to explore the inhibitory effect of photodynamic antibacterial chemotherapy-induced by cationic porphyrin derivative on clinical P. aeruginosa and its mechanism.

METHODS

The uptake of photosensitizer by P. aeruginosa and L929 cells was measured by an ultraviolet spectrophotometer. Effect of laser energy density on the bacterial activity of P. aeruginosa and post antibiotic effect were measured by bacterial suspension and tenfold dilution method. Flow cytometry and scanning electron microscopy were used to observe the activity and morphological changes of P. aeruginosa after PACT treatment.

RESULTS

The uptake of Tetra-ATPP-Lys-by P. aeruginosa and L929 was shown as concentration-dependent and time-dependent. However the uptake of L929 cell had a clear difference with P. aeruginosa at the same time and concentration intervals(P < 0.05).The increasing laser energy density had a high inactivation effect of on P. aeruginosa at the same Tetra-ATPP-Lys-concentration(P < 0.05). Post-antibiotic effect of Tetra-ATPP-Lys -PACT was dose-dependent(P < 0.05). Bacterial viability which evaluated by the flow cytometry method demonstrated that the proportion of viable bacteria is decreased with the photosensitizer dose-dependent. The morphology and microstructure of P. aeruginosa after Tetra-ATPP-Lys -PACT was demonstrated by a scanning electron microscope(SEM). After PACT, the morphology of P. aeruginosa was rod-shaped, the outer membrane surface was rough, and the bacteria were dry flat, sunken, shrunk and deformed.

CONCLUSIONS

Cationic porphyrin photosensitizer had a great damage effect on P. aeruginosa under the PACT, which can effectively destroy the microstructure of bacteria and lead to bacterial inactivation and death.

Advances in preparation and application of antibacterial hydrogels

Bacterial infections, especially those caused by drug-resistant bacteria, have seriously threatened human life and health. There is urgent to develop new antibacterial agents to reduce the problem of antibiotics. Biomedical materials with good antimicrobial properties have been widely used in antibacterial applications. Among them, hydrogels have become the focus of research in the field of biomedical materials due to their unique three-dimensional network structure, high hydrophilicity, and good biocompatibility. In this review, the latest research progresses about hydrogels in recent years were summarized, mainly including the preparation methods of hydrogels and their antibacterial applications. According to their different antibacterial mechanisms, several representative antibacterial hydrogels were introduced, such as antibiotics loaded hydrogels, antibiotic-free hydrogels including metal-based hydrogels, antibacterial peptide and antibacterial polymers, stimuli-responsive smart hydrogels, and light-mediated hydrogels. In addition, we also discussed the applications and challenges of antibacterial hydrogels in biomedicine, which are expected to provide new directions and ideas for the application of hydrogels in clinical antibacterial therapy.

Improving the Management and Treatment of Diabetic Foot Infection: Challenges and Research Opportunities

Diabetic foot infection (DFI) management requires complex multidisciplinary care pathways with off-loading, debridement and targeted antibiotic treatment central to positive clinical outcomes. Local administration of topical treatments and advanced wound dressings are often used for more superficial infections, and in combination with systemic antibiotics for more advanced infections. In practice, the choice of such topical approaches, whether alone or as adjuncts, is rarely evidence-based, and there does not appear to be a single market leader. There are several reasons for this, including a lack of clear evidence-based guidelines on their efficacy and a paucity of robust clinical trials. Nonetheless, with a growing number of people living with diabetes, preventing the progression of chronic foot infections to amputation is critical. Topical agents may increasingly play a role, especially as they have potential to limit the use of systemic antibiotics in an environment of increasing antibiotic resistance. While a number of advanced dressings are currently marketed for DFI, here we review the literature describing promising future-focused approaches for topical treatment of DFI that may overcome some of the current hurdles. Specifically, we focus on antibiotic-impregnated biomaterials, novel antimicrobial peptides and photodynamic therapy.

Photodynamic inactivation of Staphylococcus aureus in the presence of aggregation-prone photosensitizers based on BODIPY used at submicromolar concentrations

Two new brominated BODIPYs (1 and 2) bearing amino acid-based chains (l-valine for 1, and dimethyl-l-lysine for 2) were synthesized and characterized. In organic solvents, 1 and 2 were fully soluble and showed the photophysical properties expected for brominated BODIPY dyes, including efficient generation of singlet oxygen (¹O₂), upon irradiation. In contrast, in aqueous media, both compounds were prone to aggregation and the photo-induced generation of ¹O₂ was halted. Despite the lack of generation of this reactive species in aqueous media (in cuvette), both 1 and 2 have positive antimicrobial Photodynamic Inactivation (aPDI) effect. The activity against gram-positive Staphylococcus aureus and gram-negative Escherichia coli was determined through the inactivation curves, with a total energy dose of 5.3 J/cm² (white light LED used as an energy source). Compound 2 was highly active against both gram-positive and gram-negative bacteria (3 log CFU/mL reduction was obtained at 0.16 μM for S. aureus and 2.5-5.0 μM for E. coli), whereas 1 was less effective to kill S. aureus (3 log CFU/mL at 0.32 μM) and ineffective for E. coli. The higher efficiency of 2, as compared to 1, to reduce the population of bacteria, can reside in the presence of a protonatable residue in 2, allowing a more effective interaction of this molecule with the cell walls of the microorganisms. In order to explain the lack of reactivity in pure aqueous media (in cuvette) and the contrasting good activity in the presence of bacterial cells it can be hypothesized that upon interaction with the walls of the microorganisms, the aggregated photosensitizers suffer a disaggregation process restoring the ability to generate ¹O₂, and hence leading to efficient photodynamic activity against these pathogenic microorganisms, in agreement with the similar effect observed recently for porphyrinoid photosensitizers.

Photodynamic therapy for treatment of infected burns

Burns are among the most debilitating and devastating forms of trauma. Such injuries are influenced by infections, causing increased morbidity, mortality, and healthcare costs. Due to the emergence of multidrug-resistant infectious agents, efficient treatment of infections in burns is a challenging issue. Antimicrobial photodynamic therapy (aPDT) is a promising approach to inactivate infectious agents, including multidrug-resistant. In this review, studies on PubMed were gathered, aiming to summarize the achievements regarding the applications of antimicrobial photodynamic therapy for the treatment of infected burns. A literature search was carried out for aPDT published reports assessment on bacterial, fungal, and viral infections in burns. The collected data suggest that aPDT could be a promising new approach against multidrug-resistant infectious agents. However, despite important results being obtained against bacteria, experimental and clinical studies are necessary yet on the effectiveness of aPDT against fungal and viral infections in burns, which could reduce morbidity and mortality of burned patients, mainly those infected by multidrug-resistant strains.

Bioluminescent Models to Evaluate the Efficiency of Light-Based Antibacterial Approaches

The emergence of microbial resistance to antimicrobials among several common pathogenic microbial strains is an increasing problem worldwide. Thus, it is urgent to develop not only new antimicrobial therapeutics to fight microbial infections, but also new effective, rapid, and inexpensive methods to monitor the efficacy of these new therapeutics. Antimicrobial photodynamic therapy (aPDT) and antimicrobial blue light (aBL) therapy are receiving considerable attention for their antimicrobial potential and represent realistic alternatives to antibiotics. To monitor the photoinactivation process provided by aPDT and aBL, faster and more effective methods are required instead of laborious conventional plating and overnight incubation procedures. Bioluminescent microbial models are very interesting in this context. Light emission from bioluminescent microorganisms is a highly sensitive indication of their metabolic activity and can be used to monitor, in real time, the effects of antimicrobial agents and therapeutics. This chapter reviews the efforts of the scientific community concerning the development of in vitro, ex vivo, and in vivo bioluminescent bacterial models and their potential to evaluate the efficiency of aPDT and aBL in the inactivation of bacteria.

Photodynamic treatment of pathogens

The current viral pandemic has highlighted the compelling need for effective and versatile treatments, that can be quickly tuned to tackle new threats, and are robust against mutations. Development of such treatments is made even more urgent in view of the decreasing effectiveness of current antibiotics, that makes microbial infections the next emerging global threat. Photodynamic effect is one such method. It relies on physical processes proceeding from excited states of particular organic molecules, called photosensitizers, generated upon absorption of visible or near infrared light. The excited states of these molecules, tailored to undergo efficient intersystem crossing, interact with molecular oxygen and generate short lived reactive oxygen species (ROS), mostly singlet oxygen. These species are highly cytotoxic through non-specific oxidation reactions and constitute the basis of the treatment. In spite of the apparent simplicity of the principle, the method still has to face important challenges. For instance, the short lifetime of ROS means that the photosensitizer must reach the target within a few tens nanometers, which requires proper molecular engineering at the nanoscale level. Photoactive nanostructures thus engineered should ideally comprise a functionality that turns the system into a theranostic means, for instance, through introduction of fluorophores suitable for nanoscopy. We discuss the principles of the method and the current molecular strategies that have been and still are being explored in antimicrobial and antiviral photodynamic treatment.

Highly Potent Photoinactivation of Bacteria Using a Water-Soluble, Cell-Permeable, DNA-Binding Photosensitizer

Antimicrobial photodynamic therapy (APDT) employs a photosensitizer, light, and molecular oxygen to treat infectious diseases via oxidative damage, with a low likelihood for the development of resistance. For optimal APDT efficacy, photosensitizers with cationic charges that can permeate bacteria cells and bind intracellular targets are desired to not limit oxidative damage to the outer bacterial structure. Here we report the application of brominated DAPI (Br-DAPI), a water-soluble, DNA-binding photosensitizer for the eradication of both Gram-negative and Gram-positive bacteria (as demonstrated on N99 Escherichia coli and Bacillus subtilis, respectively). We observe intracellular uptake of Br-DAPI, ROS-mediated bacterial cell death via one- and two-photon excitation, and selective photocytotoxicity of bacteria over mammalian cells. Photocytotoxicity of both N99 E. coli and B. subtilis occurred at submicromolar concentrations (IC₅₀ = 0.2-0.4 μM) and low light doses (5 min irradiation times, 4.5 J cm^-2 dose), making it superior to commonly employed APDT phenothiazinium photosensitizers such as methylene blue. Given its high potency and two-photon excitability, Br-DAPI is a promising novel photosensitizer for in vivo APDT applications.

Pyrrole-based photosensitizers for photodynamic therapy — a Thomas Dougherty award paper

Photodynamic therapy (PDT) is a therapeutic modality that uses light to treat malignant or benign diseases. A photosensitizer, light, and oxygen are the three main components needed to generate a cytotoxic effect. Pyrrole-based photosensitizers have been widely used for PDT. Many of the photosensitizers within this class are macrocyclic. This is particularly true for systems that have received regulatory approval or been the subject of clinical trials. However, in recent years, a number of boron dipyrromethanes (BODIPY) have been studied as photosensitizers. Herein, we review examples of some of the most relevant pyrrole-based photosensitizers.

Selective photodynamic inactivation of Helicobacter pylori by a cationic benzylidene cyclopentanone photosensitizer - an in vitro and ex vivo study

The rise in the antibiotic resistance rate of Helicobacter pylori has led to an increasing eradication failure of this carcinogenic bacterial pathogen worldwide. This underlines the need for alternative antibacterial strategies against H. pylori infection. Antimicrobial photodynamic therapy (aPDT) is a promising non-pharmacological antibacterial technology. In this study, the selective killing activities of three benzylidene cyclopentanone (BCP) photosensitizers (Y1, P1 and P3) towards H. pylori over normal human gastric epithelial GES-1 cells were evaluated and the ex vivo photodynamic inactivation effect was preliminarily assessed on twelve H. Pylor-infected mice. Results showed that under the irradiation of 24 J/cm² 532 nm laser, Y1, P1 and P3 at 2.5 μM induced a 3-log₁₀ reduction of H. pylori CFU (99.9% killing). Confocal images showed that P3, unlike Y1 and P1, could not be uptaken by GES-1 cells. P3 at 2.5 to 20 μM showed not significant (p > 0.05) phototoxicity to GES-1 cells, nevertheless, Y1 and P1 under the same concentrations exhibited remarkable phototoxicity to GES-1 cells. In the co-culture of H. pylori and GES-1 cells, P3 at 2.5 μM led to a complete eradication of H. pylori under the irradiation of 24 J/cm² 532 nm laser. While for the GES-1 cells, no significant (p > 0.05) phototoxicity was observed under the same aPDT dosage. The ex vivo experiments showed that P3 mediated aPDT resulted in 82.4% to 100% reduction of H. pylori CFU without damaging the gastric mucosa. To sum up, P3 is a promising anti-H. pylori photosensitizer with the ability to selectively photo-inactivate H. pylori while sparing normal gastric tissues.

Photodynamic Inactivation of Pseudomonas aeruginosa by PHEMA Films Loaded with Rose Bengal: Potentiation Effect of Potassium Iodide

Four formulations have been used to produce different poly(2-hydroxyethyl methacrylate) (PHEMA) thin films, containing singlet oxygen photosensitizer Rose Bengal (RB). The polymers have been characterized employing Thermogravimetric Analysis (TGA), Attenuated Total Reflectance Fourier Transform Infrared Spectroscopy (ATR-FTIR) and UV-vis Absorption Spectroscopy. When irradiated with white light (400-700 nm) films generated singlet oxygen (1O2), as demonstrated by the reactivity with 1O2 trap 9,10-dimethylanthracene (DMA). Material with the highest RB loading (polymer A4, 835 nmol RB/g polymer) was able to perform up to ten cycles of DMA oxygenation reactions at high conversion rates (ca. 90%). Polymer A4 was also able to produce the complete eradication of a Pseudomonas aeruginosa planktonic suspension of 8 log10 CFU/mL, when irradiated with white light (total dose 72 J/cm2). The antimicrobial photodynamic effect was remarkably enhanced by adding potassium iodide (100 mM). In such conditions the complete bacterial reduction occurred with a total light dose of 24 J/cm2. Triiodide anion (I3-) generation was confirmed by UV-vis absorption spectroscopy. This species was detected inside the PHEMA films after irradiation and at concentrations ca. 1 M. The generation of this species and its retention in the matrix imparts long-lasting bactericidal effects to the RB@PHEMA polymeric hydrogels. The polymers here described could find potential applications in the medical context, when optimized for their use in everyday objects, helping to prevent bacterial contagion by contact with surfaces.

Understanding delayed fluorescence and triplet decays of Protoporphyrin IX under hypoxic conditions

Photosensitizers of singlet oxygen exhibit three main types of reverse intersystem-crossing (RISC): thermally activated, triplet-triplet annihilation, and singlet oxygen feedback. RISC can be followed by delayed fluorescence (DF) emission, which can provide important information about the excited state dynamics in the studied system. An excellent model example is a widely used clinical photosensitizer Protoporphyrin IX, which manifests all three mentioned types of RISC and DF. Here, we estimated rate constants of individual RISC and DF processes in Protoporphyrin IX in dimethylformamide, and we showed how these affect triplet decays and DF signals under diverse experimental conditions, such as a varying oxygen concentration or excitation intensity. This provided a basis for a general discussion on guidelines for a more precise analysis of long-lived signals. Furthermore, it has been found that PpIX photoproducts and potential transient excited complexes introduce a new overlapping delayed luminescence spectral band with a distinct lifetime. These findings are important for design of more accurate biological oxygen sensors and assays based on DF and triplet lifetime.

Derivatives of Natural Chlorophylls as Agents for Antimicrobial Photodynamic Therapy

The rapid growth of drug-resistant bacteria all over the world has given rise to a major research challenge, namely a search for alternative treatments to which bacteria will be unable to develop resistance. Photodynamic therapy is an approach of this kind. It involves the use of photosensitizers in combination with visible light at a certain wavelength to excite the former and generate reactive oxygen species. Various synthetic heterocyclic compounds are used as photosensitizers. Of these, derivatives of natural chlorophylls have a special place due to their properties. This review deals with the use of such compounds in antimicrobial PDT.

Iron(III) Complex-Functionalized Gold Nanocomposite as a Strategic Tool for Targeted Photochemotherapy in Red Light

Iron(III)-phenolate/carboxylate complexes exhibiting photoredox chemistry and photoactivated reactive oxygen species (ROS) generation at their ligand-to-metal charge-transfer (LMCT) bands have emerged as potential strategic tools for photoactivated chemotherapy. Herein, the synthesis, in-depth characterization, photochemical assays, and remarkable red light-induced photocytotoxicities in adenocarcinomic human immortalized human keratinocytes (HaCaT) and alveolar basal epithelial (A549) cells of iron(III)-phenolate/carboxylate complex of molecular formula, [Fe(L¹)(L²)] (1), where L¹ is bis(3,5 di-tert-butyl-2-hydroxybenzyl)glycine and L² is 5-(1,2-dithiolan-3-yl)-N-(1,10-phenanthroline-5-yl)pentanamide, and the gold nanocomposite functionalized with complex 1 (1-AuNPs) are reported. There was a significant red shift in the UV-visible absorption band on functionalization of complex 1 to the gold nanoparticles (λ_max: 573 nm, 1; λ_max: 660 nm, 1-AuNPs), rendering the nanocomposite an ideal candidate for photochemotherapeutic applications. The notable findings in our present studies are (i) the remarkable cytotoxicity of the nanocomposite (1-AuNPs) to A549 (IC₅₀: 0.006 μM) and HaCaT (IC₅₀: 0.0075 μM) cells in red light (600-720 nm, 30 J/cm²) while almost nontoxic (IC₅₀ > 500 μg/mL, 0.053 μM) in the dark, (ii) the nontoxicity of 1-AuNPs to normal human diploid fibroblasts (WI-38) or human peripheral lung epithelial (HPL1D) cells (IC₅₀ > 500 μg/mL, 0.053 μM) both in the dark and red light signifying the target-specific anticancer activity of the nanocomposite, (iii) localization of 1-AuNPs in mitochondria and partly nucleus, (iv) remarkable red light-induced generation of reactive oxygen species (ROS: ¹O₂, ^•OH) in vitro, (v) disruption of the mitochondrial membrane due to enhanced oxidative stress, and (vi) caspase 3/7-dependent apoptosis. A similar cytotoxic profile of complex 1 was another key finding of our studies. Overall, our current investigations show a new red light-absorbing iron(III)-phenolate/carboxylate complex-functionalized gold nanocomposite (1-AuNPs) as the emerging next-generation iron-based photochemotherapeutic agent for targeted cancer treatment modality.

Dipyrrinato-Iridium(III) Complexes for Application in Photodynamic Therapy and Antimicrobial Photodynamic Inactivation

The generation of bio-targetable photosensitizers is of utmost importance to the emerging field of photodynamic therapy and antimicrobial (photo-)therapy. A synthetic strategy is presented in which chelating dipyrrin moieties are used to enhance the known photoactivity of iridium(III) metal complexes. Formed complexes can thus be functionalized in a facile manner with a range of targeting groups at their chemically active reaction sites. Dipyrrins with N- and O-substituents afforded (dipy)iridium(III) complexes via complexation with the respective Cp*-iridium(III) and ppy-iridium(III) precursors (dipy=dipyrrinato, Cp*=pentamethyl-η5 -cyclopentadienyl, ppy=2-phenylpyridyl). Similarly, electron-deficient [IrIII (dipy)(ppy)2 ] complexes could be used for post-functionalization, forming alkenyl, alkynyl and glyco-appended iridium(III) complexes. The phototoxic activity of these complexes has been assessed in cellular and bacterial assays with and without light; the [IrIII (Cl)(Cp*)(dipy)] complexes and the glyco-substituted iridium(III) complexes showing particular promise as photomedicine candidates. Representative crystal structures of the complexes are also presented.

Computational prediction of photosensitizers’ toxicity

The percentage of failures in late pharmaceutical development due to toxicity has increased dramatically over the last decade or so, resulting in increased demand for new methods to rapidly and reliably predict the toxicity of compounds. Today, computational toxicology can be used in every phase of drug discovery and development, from profiling large libraries early on, to predicting off-target effects in the mid-discovery phase, and to assess potential mutagenic impurities in development and degradants as part of life-cycle management. In this study, for the first time, in silico approaches were used to analyze the possible dark toxicity of photosensitive systems based on chlorin e6 and assessed possible toxicity of these compositions. By applying quantitative structure-activity relationship models (QSARs) and modeling adverse outcome pathways (AOPs), a potential toxic effect of water-soluble (chlorin e6 and chlorin e6 aminoamid) and hydrophobic (tetraphenylporphyrin) photosensitizers (PS) was predicted. Particularly, PSs’ protein binding ability, reactivity to form peptide adducts, glutathione conjugation, activity in dendritic cells, and gene expression activity in keratinocytes were explored. Using a metabolism simulator, possible PS metabolites were predicted and their potential toxicity was assessed as well. It was shown that all tested porphyrin PS and their predicted metabolites possess low activity in the mentioned processes and therefore are unable to cause significant adverse toxic effects under dark conditions.

In Vitro and In Vivo Demonstration of Ultraefficient and Broad-Spectrum Antibacterial Agents for Photodynamic Antibacterial Chemotherapy

Increasing threats from both pathogenic infections and antibiotic resistance highlight the pressing demand for nonantibiotic agents and alternative therapies. Herein, we report several new phenothiazinium-based derivatives, which could be readily synthesized via fragment-based assembly, which exhibited remarkable bactericidal activities both in vitro and in vivo. Importantly, in contrast to numerous clinically and preclinically used antibacterial photosensitizers, these compounds were able to eliminate various types of microorganisms, including Gram-(+) Staphylococcus aureus (S. aureus), Gram-(-) Escherichia coli, multidrug-resistant S. aureus, and their associated biofilms, at low drug and light dosages (e.g., 0.21 ng/mL in vitro and 1.63 ng/cm² in vivo to eradicate S. aureus at 30 J/cm²). This study thus unveils the potential of these novel phenothiaziniums as potent antimicrobial agents for highly efficient photodynamic antibacterial chemotherapy.

Pentamidine enhances photosensitization of Acinetobacter baumannii using diode lasers with emission of light at wavelength of ʎ = 405 nm and ʎ = 635 nm

Antimicrobial photodynamic inactivation is currently one of the most promising trends in the modern bactericidal protocols. Under the conditions defined in our studies, we found that in vitro photosensitization of A. baumannii with 5-ALA as a precursor of protoporphyrin IX (photosensitizer) reduces the concentration of viable cells in planktonic cultures, and this process can be strongly enhanced by pentamidine. Diode lasers with the peak-power wavelength of ʎ = 405 nm (radiation intensity of 26 mW cm^-2) and ʎ = 635 nm (radiation intensity of 55 mW cm^-2) were used in this study. It was found that a blue laser light (energy fluence of 64 J cm^-2; no external photosensitizer) in the presence of pentamidine resulted in a reduction of CFU of 99.992 % compared to 99.97 % killing without pentamidine. When a red laser light was used in the experiments (energy fluence of 136 J cm^-2; no external photosensitizer), the mortality rate was 99.98 % in the presence of pentamidine compared to 99.93 % of those killed without the addition of this drug. The lethal effect with 5-ALA was achieved under blue light fluence of 16 J cm^-2 (in the presence of pentamidine) and 32 J cm^-2 (without pentamidine). In the case of laser light of 635 nm, the lethal effect with 5-ALA was attained with energy fluence of 51 J cm^-2 (with pentamidine) and 102 J cm^-2 (without pentamidine). The possible roles of pentamidine in enhancing photodynamic inactivation of A. baumannii have been discussed.

Rectangular Holes in Porphyrin Isomers Act As Mono- and Binucleating Ligands: Stereochemistry of Mono- and Diboron Porphycenes and Their Protonation Behaviors

The first boron complexes of porphycenes, structural isomers of porphyrin, are reported. They are synthesized in good yields by reacting the free-base porphycene ligands with BF₃·Et₂O through a microwave-assisted method. Depending on the substituent group of porphycenes, two different coordination structures, mono- and diboron porphycenes, are obtained simultaneously. The single crystal structures and DFT calculations suggest that the boron atom of the monoboron porphycene is favorably coordinated on the dipyrroethene site, and the regioisomer of diboron porphycene is of cisoid stereochemistry, which is more stable than transoid. We also investigate the protonation behavior of boron porphycene complexes. Diboron porphycene does not undergo protonation, whereas monoboron porphycene undergoes protonation at the nonboron coordinating pyrroline site, resulting in a red shift in both absorption and emission spectra. Protonation and deprotonation of monoboron porphycene can be reversibly triggered using acids and bases.

Porphyrin-Loaded Lignin Nanoparticles Against Bacteria: A Photodynamic Antimicrobial Chemotherapy Application

The need for alternative strategies to fight bacteria is evident from the emergence of antimicrobial resistance. To that respect, photodynamic antimicrobial chemotherapy steadily rises in bacterial eradication by using light, a photosensitizer and oxygen, which generates reactive oxygen species that may kill bacteria. Herein, we report the encapsulation of 5,10,15,20-tetrakis(4-hydroxyphenyl)-21H,23H-porphyrin into acetylated lignin water-dispersible nanoparticles (THPP@AcLi), with characterization of those systems by standard spectroscopic and microscopic techniques. We observed that THPP@AcLi retained porphyrin's photophysical/photochemical properties, including singlet oxygen generation and fluorescence. Besides, the nanoparticles demonstrated enhanced stability on storage and light bleaching. THPP@AcLi were evaluated as photosensitizers against two Gram-negative bacteria, Escherichia coli and Pseudomonas aeruginosa, and against three Gram-positive bacteria, Staphylococcus aureus, Staphylococcus epidermidis, and Enterococcus faecalis. THPP@AcLi were able to diminish Gram-positive bacterial survival to 0.1% when exposed to low white LED light doses (4.16 J/cm2), requiring concentrations below 5 μM. Nevertheless, the obtained nanoparticles were unable to diminish the survival of Gram-negative bacteria. Through transmission electron microscopy observations, we could demonstrate that nanoparticles did not penetrate inside the bacterial cell, exerting their destructive effect on the bacterial wall; also, a high affinity between acetylated lignin nanoparticles and bacteria was observed, leading to bacterial flocculation. Altogether, these findings allow to establish a photodynamic antimicrobial chemotherapy alternative that can be used effectively against Gram-positive topic infections using the widely available natural polymeric lignin as a drug carrier. Further research, aimed to inhibit the growth and survival of Gram-negative bacteria, is likely to enhance the wideness of acetylated lignin nanoparticle applications.

Impact of binding to the multidrug resistance regulator protein LmrR on the photo-physics and -chemistry of photosensitizers

Light activated photosensitizers generate reactive oxygen species (ROS) that interfere with cellular components and can induce cell death, e.g., in photodynamic therapy (PDT). The effect of cellular components and especially proteins on the photochemistry and photophysics of the sensitizers is a key aspect in drug design and the correlating cellular response with the generation of specific ROS species. Here, we show the complex range of effects of binding of photosensitizer to a multidrug resistance protein, produced by bacteria, on the formers reactivity. We show that recruitment of drug like molecules by LmrR (Lactococcal multidrug resistance Regulator) modifies their photophysical properties and their capacity to induce oxidative stress especially in 1O2 generation, including rose bengal (RB), protoporphyrin IX (PpIX), bodipy, eosin Y (EY), riboflavin (RBF), and rhodamine 6G (Rh6G). The range of neutral and charged dyes with different exited redox potentials, are broadly representative of the dyes used in PDT.

Antibacterial Hybrid Hydrogels

Bacterial infectious diseases and bacterial-infected environments have been threatening the health of human beings all over the world. In view of the increased bacteria resistance caused by overuse or improper use of antibiotics, antibacterial biomaterials are developed as the substitutes for antibiotics in some cases. Among them, antibacterial hydrogels are attracting more and more attention due to easy preparation process and diversity of structures by changing their chemical cross-linkers via covalent bonds or noncovalent physical interactions, which can endow them with various specific functions such as high toughness and stretchability, injectability, self-healing, tissue adhesiveness and rapid hemostasis, easy loading and controlled drug release, superior biocompatibility and antioxidation as well as good conductivity. In this review, the recent progress of antibacterial hydrogel including the fabrication methodologies, interior structures, performances, antibacterial mechanisms, and applications of various antibacterial hydrogels is summarized. According to the bacteria-killing modes of hydrogels, several representative hydrogels such as silver nanoparticles-based hydrogel, photoresponsive hydrogel including photothermal and photocatalytic, self-bacteria-killing hydrogel such as inherent antibacterial peptides and cationic polymers, and antibiotics-loading hydrogel are focused on. Furthermore, current challenges of antibacterial hydrogels are discussed and future perspectives in this field are also proposed.

Photoeradication of bacteria with porphycenes: Substituent effects on the efficiency

Considering the world-wide problem of growing antibiotic resistance of bacteria, photodynamic inactivation (PDI) has a potential to become the treatment approach against some infectious diseases. In our study, four differently substituted porphycenes were compared in terms of their bactericidal activity against E. faecalis. All tested compounds had a similar photophysical characteristics, i.e., there were no significant differences in the location of absorption bands or molar absorption coefficients. Also, singlet oxygen generation quantum yields were very similar. Surprisingly, differently substituted porphycenes caused very diverse PDI effects. Special attention was drawn to the tert-butyl moieties. Our studies demonstrated that the presence of these substituents lowers the bactericidal potential significantly and can completely block the activity when more than one moiety is introduced to the molecule. The porphycenes lacking tert-butyl groups exhibited much higher PDI potential and we assign this effect to different interactions of the differently substituted porphycenes with the bacterial cells. Most likely, the presence of tert-butyls impairs cell penetration by the photosensitizer. These results remind that the favorable photophysical characteristics do not ensure that the compound considered as a potential PDI agent can reach the microbial cells.

Contemporary approaches and future perspectives of antibacterial photodynamic therapy (aPDT) against methicillin-resistant Staphylococcus aureus (MRSA): A systematic review

The high prevalence of methicillin-resistant Staphylococcus aureus (MRSA) causing skin and soft tissue infections in both the community and healthcare settings challenges the limited options of effective antibiotics and motivates the search for alternative therapeutic solutions, such as antibacterial photodynamic therapy (aPDT). While many publications have described the promising anti-bacterial activities of PDT in vitro, its applications in vivo and in the clinic have been very limited. This limited availability may in part be due to variabilities in the selected photosensitizing agents (PS), the variable testing conditions used to examine anti-bacterial activities and their effectiveness in treating MRSA infections. We thus sought to systematically review and examine the evidence from existing studies on aPDT associated with MRSA and to critically appraise its current state of development and areas to be addressed in future studies. In 2018, we developed and registered a review protocol in the International Prospective Register of Systematic Reviews (PROSPERO) with registration No: CRD42018086736. Three bibliographical databases were consulted (PUBMED, MEDLINE, and EMBASE), and a total of 113 studies were included in this systematic review based on our eligibility criteria. Many variables, such as the use of a wide range of solvents, pre-irradiation times, irradiation times, light sources and light doses, have been used in the methods reported by researchers, which significantly affect the inter-study comparability and results. On another note, new approaches of linking immunoglobulin G (IgG), antibodies, efflux pump inhibitors, and bacteriophages with photosensitizers (PSs) and the incorporation of PSs into nano-scale delivery systems exert a direct effect on improving aPDT. Enhanced activities have also been achieved by optimizing the physicochemical properties of the PSs, such as the introduction of highly lipophilic, poly-cationic and site-specific modifications of the compounds. However, few in vivo studies (n = 17) have been conducted to translate aPDT into preclinical studies. We anticipate that further standardization of the experimental conditions and assessing the efficacy in vivo would allow this technology to be further applied in preclinical trials, so that aPDT would develop to become a sustainable, alternative therapeutic option against MRSA infection in the future.

Antibiotic-Free Antibacterial Strategies Enabled by Nanomaterials: Progress and Perspectives

Bacterial infection is one of the top ten leading causes of death globally and the worst killer in low-income countries. The overuse of antibiotics leads to ever-increasing antibiotic resistance, posing a severe threat to human health. Recent advances in nanotechnology provide new opportunities to address the challenges in bacterial infection by killing germs without using antibiotics. Antibiotic-free antibacterial strategies enabled by advanced nanomaterials are presented. Nanomaterials are classified on the basis of their mode of action: nanomaterials with intrinsic or light-mediated bactericidal properties and others that serve as vehicles for the delivery of natural antibacterial compounds. Specific attention is given to antibacterial mechanisms and the structure-performance relationship. Practical antibacterial applications employing these antibiotic-free strategies are also introduced. Current challenges in this field and future perspectives are presented to stimulate new technologies and their translation to fight against bacterial infection.

Programmable antibiotic delivery to combat methicillin-resistant Staphylococcus aureus through precision therapy

The rapid dissemination of life-threatening multidrug-resistant bacterial pathogens calls for the development of new antibacterial agents and alternative strategies. The virulence factor secreted by bacteria plays a crucial role in the sophisticated processes during infections. Inspired by the unique capacity of many bacteria inducing clotting of plasma to initiate colonization, we propose a programmable antibiotic delivery system for precision therapy using methicillin-resistant S. aureus (MRSA) as a model. Coagulase utilized by MRSA to directly cleave fibrinogen into fibrin, is an ideal target not only for tracking bacterial status but for triggering the collapse of fibrinogen functionalized porous microspheres. Subsequently, staphylokinase, another virulence factor of MRSA, catalyzed hydrolysis of fibrin to further release the encapsulated antibiotics from microspheres. Our sequential triggered-release system exhibits high selectivity to distinguish live or dead MRSA from other pathogenic bacteria. Furthermore, such programmable microspheres clear 99% MRSA in 4 h, and show increased efficiency in a wound healing model in rats. Our study provides a programmable drug delivery system to precisely target bacterial pathogens using their intrinsic enzymatic cascades. This programmable platform with reduced selective stress of antibiotics on microbiota sheds light on the potential therapy for future clinical applications.

A porphycene-gentamicin conjugate for enhanced photodynamic inactivation of bacteria

A novel photoantimicrobial agent, namely 2-aminothiazolo[4,5-c]-2,7,12,17-tetrakis(methoxyethyl)porphycene (ATAZTMPo-gentamicin) conjugate, has been prepared by a click reaction between the red-light absorbing 9-isothiocyanate-2,7,12,17-tetrakis(methoxyethyl)porphycene (9-ITMPo) and the antibiotic gentamicin. The conjugate exhibits submicromolar activity in vitro against both Gram-positive and Gram-negative bacteria (Staphylococcus aureus and Escherichia coli, respectively) upon exposure to red light and is devoid of any cytotoxicity in the dark. The conjugate outperforms the two components delivered separately, which may be used to enhance the therapeutic index of gentamicin, broaden the spectrum of pathogens against which it is effective and reduce its side effects. Additionally, we report a novel straightforward synthesis of 2,7,12,17-tetrakis(methoxyethyl) porphycene (TMPo) that decreases the number of steps from nine to six.

Functionalized mesoporous silica nanoparticles with 2,7,12,17-tetraphenylporphycene

Mesoporous silica nanoparticles decorated with 2,7,12,17-tetraphenylporphycene have been prepared by reaction of aminated nanoparticles with 9-(glutaric [Formula: see text]-succinimidylesteramide)-2,7,12,17-tetraphenylporphycene. The as-prepared nanoparticles were characterized by UV-vis spectroscopy, DLS and TEM.

Hydrogels: soft matters in photomedicine

Photodynamic therapy (PDT), a shining beacon in the realm of photomedicine, is a non-invasive technique that utilizes dye-based photosensitizers (PSs) in conjunction with light and oxygen to produce reactive oxygen species to combat malignant tissues and infectious microorganisms. Yet, for PDT to become a common, routine therapy, it is still necessary to overcome limitations such as photosensitizer solubility, long-term side effects (e.g., photosensitivity) and to develop safe, biocompatible and target-specific formulations. Polymer based drug delivery platforms are an effective strategy for the delivery of PSs for PDT applications. Among them, hydrogels and 3D polymer scaffolds with the ability to swell in aqueous media have been deeply investigated. Particularly, hydrogel-based formulations present real potential to fulfill all requirements of an ideal PDT platform by overcoming the solubility issues, while improving the selectivity and targeting drawbacks of the PSs alone. In this perspective, we summarize the use of hydrogels as carrier systems of PSs to enhance the effectiveness of PDT against infections and cancer. Their potential in environmental and biomedical applications, such as tissue engineering photoremediation and photochemistry, is also discussed.

Pathogen-Specific Polymeric Antimicrobials with Significant Membrane Disruption and Enhanced Photodynamic Damage To Inhibit Highly Opportunistic Bacteria

Highly pathogenic Gram-negative bacteria and their drug resistance are a severe public health threat with high mortality. Gram-negative bacteria are hard to kill due to the complex cell envelopes with low permeability and extra defense mechanisms. It is challenging to treat them with current strategies, mainly including antibiotics, peptides, polymers, and some hybrid materials, which still face the issue of drug resistance, limited antibacterial selectivity, and severe side effects. Together with precise bacteria targeting, synergistic therapeutic modalities, including physical membrane damage and photodynamic eradication, are promising to combat Gram-negative bacteria. Herein, pathogen-specific polymeric antimicrobials were formulated from amphiphilic block copolymers, poly(butyl methacrylate)- b-poly(2-(dimethylamino) ethyl methacrylate- co-eosin)- b-ubiquicidin, PBMA- b-P(DMAEMA- co-EoS)-UBI, in which pathogen-targeting peptide ubiquicidin (UBI) was tethered in the hydrophilic chain terminal, and Eosin-Y was copolymerized in the hydrophilic block. The micelles could selectively adhere to bacteria instead of mammalian cells, inserting into the bacteria membrane to induce physical membrane damage and out-diffusion of intracellular milieu. Furthermore, significant in situ generation of reactive oxygen species was observed upon light irradiation, achieving further photodynamic eradication. Broad-spectrum bacterial inhibition was demonstrated for the polymeric antimicrobials, especially highly opportunistic Gram-negative bacteria, such as Pseudomona aeruginosa ( P. aeruginosa) based on the synergy of physical destruction and photodynamic therapy, without detectable resistance. In vivo P. aeruginosa-infected knife injury model and burn model both proved good potency of bacteria eradication and promoted wound healing, which was comparable with commercial antibiotics, yet no risk of drug resistance. It is promising to hurdle the infection and resistance suffered from highly opportunistic bacteria.

Improved bactericidal capacity of UV-B radiation against E. coli strains by photosensitizing bacteria with fructosazine - An advanced Maillard reaction product

This study investigated the effect of UV-B irradiation and the combinational effect with glucosamine caramel, fructosazine and riboflavin on the antimicrobial activities against Bacillus subtilis (ATCC 6633) and two strains of Escherichia coli (AW 1.7 and ATCC 25922). The quantum yield of fructosazine was two times less than that of tryptophan, indicating its ability to emit fluorescent light but less efficiently than tryptophan. UV-B treatment alone was efficient to achieve a bactericidal effect for both E. coli stains tested, however no effect was found for Bacillus subtilis for up to 80 mJ/cm² UV-B. The combination of UV-B with photosensitizers fructosazine, glucosamine caramel and riboflavin enhanced the UV-B efficacy against E. coli strains at lower UV-B doses, while Bacillus subtilis ATCC 6633 was more resistant to the treatment combinations. High-performance liquid chromatography showed the production of different fructosazine reaction products occurred during irradiation, including the possible formation of endoperoxides.

Chitosan Inhibits the Rehabilitation of Damaged Microbes Induced by Photodynamic Inactivation

Previously, we showed that chitosan could augment the biocidal efficacy mediated by photodynamic treatment against Staphylococcus aureus, Pseudomonas aeruginosa, and Candida albicans. In this study, we showed that the antimicrobial action of chitosan in augmenting photodynamic inactivation (PDI) is related to the increase in cell surface destruction. The microbial cell surfaces exhibit severe irregular shapes after PDI in the presence of chitosan as demonstrated by transmitted electron microscopy. Furthermore, increases in the concentration or incubation time of chitosan significantly reduced the amounts of photosensitizer toluidine blue O required, indicating that chitosan could be an augmenting agent used in conjunction with PDI against S. aureus, P. aeruginosa, and C. albicans. A prolonged lag phase was found in microbial cells that survived to PDI, in which chitosan acted to completely eradicate the cells. Once the exponential log stage and cell rebuild began, their cellular functions from PDI-induced damage returned and the increased cytotoxic effect of chitosan disappeared. Together, our results suggest that chitosan can prevent the rehabilitation of PDI-surviving microbial cells, leading to increased biocidal efficacy.

An efficient formulation based on cationic porphyrins to photoinactivate Staphylococcus aureus and Escherichia coli

AIM

Antibiotic resistance is an increasingly serious worldwide problem that needs to be addressed with alternative tools. Antimicrobial photodynamic therapy seems a promising approach but in some cases the synthesis of highly efficient photosensitizers requires laborious processes burdened by extensive chromatographic purifications. In this study, we evaluate the suitability of a formulation (Form-1) containing porphyrins bearing different charges, obtained during the synthesis of the highly efficient photosensitizer 5,10,15-tris(1-methylpyridinium-4-yl)-20-(pentafluorophenyl)porphyrin tri-iodide.

RESULTS

Form-1 was equally effective in the photoinactivation of Escherichia coli and Staphylococcus aureus (reductions >5 log) as the best stand-alone photosensitizer.

CONCLUSION

The effective reduction of bacteria with Form-1 provided promising indications supporting its use, leading to a substantial decrease in costs and production time.

Evaluation of meso-substituted cationic corroles as potential antibacterial agents

Cationic derivatives of 5,10,15-tris[4-(pyridin-4-ylsulphanyl)-2,3,5,6-tetrafluorophenyl]-corrolategallium(III)pyridine and 5,10,15-tris[4-(pyridin-2-ylsulfanyl)-2,3,5,6-tetrafluorophenyl]-correlategallium(III)pyridine were synthesized and their photosensitizing properties against the naturally bioluminescent Gram-negative bacterium Allivibrio fischeri were evaluated. The cationic corrole derivatives exhibited antibacterial activity at micromolar concentrations against this Gram-negative bacterium strain.

Nanomedicine and advanced technologies for burns: Preventing infection and facilitating wound healing

According to the latest report from the World Health Organization, an estimated 265,000 deaths still occur every year as a direct result of burn injuries. A widespread range of these deaths induced by burn wound happens in low- and middle-income countries, where survivors face a lifetime of morbidity. Most of the deaths occur due to infections when a high percentage of the external regions of the body area is affected. Microbial nutrient availability, skin barrier disruption, and vascular supply destruction in burn injuries as well as systemic immunosuppression are important parameters that cause burns to be susceptible to infections. Topical antimicrobials and dressings are generally employed to inhibit burn infections followed by a burn wound therapy, because systemic antibiotics have problems in reaching the infected site, coupled with increasing microbial drug resistance. Nanotechnology has provided a range of molecular designed nanostructures (NS) that can be used in both therapeutic and diagnostic applications in burns. These NSs can be divided into organic and non-organic (such as polymeric nanoparticles (NPs) and silver NPs, respectively), and many have been designed to display multifunctional activity. The present review covers the physiology of skin, burn classification, burn wound pathogenesis, animal models of burn wound infection, and various topical therapeutic approaches designed to combat infection and stimulate healing. These include biological based approaches (e.g. immune-based antimicrobial molecules, therapeutic microorganisms, antimicrobial agents, etc.), antimicrobial photo- and ultrasound-therapy, as well as nanotechnology-based wound healing approaches as a revolutionizing area. Thus, we focus on organic and non-organic NSs designed to deliver growth factors to burned skin, and scaffolds, dressings, etc. for exogenous stem cells to aid skin regeneration. Eventually, recent breakthroughs and technologies with substantial potentials in tissue regeneration and skin wound therapy (that are as the basis of burn wound therapies) are briefly taken into consideration including 3D-printing, cell-imprinted substrates, nano-architectured surfaces, and novel gene-editing tools such as CRISPR-Cas.

A series of water-soluble photosensitizers based on 3-cinnamoylcoumarin forin vitroantimicrobial photodynamic inactivation

Three cationic PSs (M3–M5) exhibited equivalent photodynamic inactivation (PDI) efficacies to MRSA andA. baumannii, whileM4andM5showed significantly higher PDI toC. albicans, compared to methylene blue, indicating their large potentials on PDI.

Functionalized 2,2'-Bipyrroles: Building Blocks for Pyrrolic Macrocycles

Functionalized N-unsubstituted 2,2'-bipyrroles are basic building blocks for the preparation of pyrrolic macrocycles and natural products, such as prodigiosines. The aim of this review is to provide a description of the most important methodologies used to prepare 2,2'-bipyrroles and their central role as building blocks for the synthesis of porphyrinoids and property-defining structural elements therein.

In-vivo monitoring of infectious diseases in living animals using bioluminescence imaging

Traditional methods of localizing and quantifying the presence of pathogenic microorganisms in living experimental animal models of infections have mostly relied on sacrificing the animals, dissociating the tissue and counting the number of colony forming units. However, the discovery of several varieties of the light producing enzyme, luciferase, and the genetic engineering of bacteria, fungi, parasites and mice to make them emit light, either after administration of the luciferase substrate, or in the case of the bacterial lux operon without any exogenous substrate, has provided a new alternative. Dedicated bioluminescence imaging (BLI) cameras can record the light emitted from living animals in real time allowing non-invasive, longitudinal monitoring of the anatomical location and growth of infectious microorganisms as measured by strength of the BLI signal. BLI technology has been used to follow bacterial infections in traumatic skin wounds and burns, osteomyelitis, infections in intestines, Mycobacterial infections, otitis media, lung infections, biofilm and endodontic infections and meningitis. Fungi that have been engineered to be bioluminescent have been used to study infections caused by yeasts (Candida) and by filamentous fungi. Parasitic infections caused by malaria, Leishmania, trypanosomes and toxoplasma have all been monitored by BLI. Viruses such as vaccinia, herpes simplex, hepatitis B and C and influenza, have been studied using BLI. This rapidly growing technology is expected to continue to provide much useful information, while drastically reducing the numbers of animals needed in experimental studies.

Photonic monitoring of treatment during infection and sepsis: development of new detection strategies and potential clinical applications

Despite the strong decline in the infection-associated mortality since the development of the first antibiotics, infectious diseases are still a major cause of death in the world. With the rising number of antibiotic-resistant pathogens, the incidence of deaths caused by infections may increase strongly in the future. Survival rates in sepsis, which occurs when body response to infections becomes uncontrolled, are still very poor if an adequate therapy is not initiated immediately. Therefore, approaches to monitor the treatment efficacy are crucially needed to adapt therapeutic strategies according to the patient's response. An increasing number of photonic technologies are being considered for diagnostic purpose and monitoring of therapeutic response; however many of these strategies have not been introduced into clinical routine, yet. Here, we review photonic strategies to monitor response to treatment in patients with infectious disease, sepsis, and septic shock. We also include some selected approaches for the development of new drugs in animal models as well as new monitoring strategies which might be applicable to evaluate treatment response in humans in the future. Figure Label-free probing of blood properties using photonics.