Palladium-Catalyzed C–H Bond Direct Alkynylation of 5-Membered Heteroarenes: A Well-Defined Synthetic Route to Azole Derivatives Containing Two Different Alkynyl Groups

Imidazo[1,2-a]pyridine and Imidazo[1,5-a]pyridine: Electron Donor Groups in the Design of D-π-A Dyes

This work investigates the electron-donating capabilities of two 10-π electron nitrogen bridgehead bicyclic [5,6]-fused ring systems, imidazo[1,2-a]pyridine and imidazo[1,5-a]pyridine rings. Eight compounds with varying positions of electron-withdrawing moieties (TCF or DCI) coupled to the imidazopyridine ring were synthesized and studied. DCI-containing compounds (Ib-IVb) exhibited a purely dipolar nature with broad absorption bands, weak fluorescence, large Stokes shifts, and strong solvatochromism. In contrast, TCF-containing compounds (Ia-IVa) demonstrated diverse properties. Imidazo[1,2-a]pyridine derivatives Ia and IIa were purely dipolar, while imidazo[1,5-a]pyridine derivatives IIIa and IVa displayed a cyanine-like character with intense absorption and higher quantum yields of emission. The observed gradual red shift in optical properties with changing electron-donor groups (IIb < Ib < IIIb < IVb) and (IIa < Ia < IIIa < IVa) underscores the stronger electron-donor character of imidazo[1,5-a]pyridine compared to that of imidazo[1,2-a]pyridine. Furthermore, crystalline powders of imidazo[1,2-a]pyridine derivatives exhibited fluorescence despite minimal emission in solution. Two compounds (Ib and IVa) were successfully formulated into nanoparticles for potential in vivo imaging applications in zebrafish embryos.

Influence of π-Endcaps on the Performance of Functionalized Quinolines for p-Channel OFETs

This study investigates the influence of aryl and ethynyl linkers as well the effect of various pi-end-groups on the performance of the quinoline-based organic field-effect transistors. A series of new functionalized quinolines with D-π-A-π-D and A-π-A-π-A architectures are designed and synthesized via the Sonagashira cross-coupling reaction. All the new compounds are well characterized and their photophysical properties are studied. The bottom gate-top contact-organic field-effect transistors devices are fabricated using the spin-coating technique. By employing the pre and post-annealing technique, films with uniform surface coverage are obtained. The variation in the end-groups results in versatile packing arrangements which determine their good charge transport properties. The p-channel transistor behavior is observed for all the new compounds. Among the molecules studied, methoxyphenyl and thiophen-2-yl terminal functionalized with D-π-A-π-D architecture exhibit the higher p-channel transistor characteristics with hole mobilities of 1.39 and 1.33 cm² V^-1 s^-1 , respectively. The good charge carrier mobilities are supported by an electron-donating methoxy group and thiophene as the end-groups with high highest occupied molecular orbitals (HOMO) and lowest unoccupied molecular orbitals (LUMO) levels, extensive π-conjugation, and better self-assembly.

Accessing C2-Functionalized 1,3-(Benz)azoles through Transition Metal-Catalyzed C-H Activation

The skeletal presence of 1,3-azoles in a variety of bioactive natural products, pharmacophores, and organic materials demands the derivatization of such heteroarenes regioselectively. Plenty of cross-coupling as well as cyclocondensation reactions have been performed to build up these skeletons but remained commercially unrealizable. A couple of severe drawbacks are faced by these traditional protocols that require a more straightforward strategy to obviate them. Transition metal-catalyzed C-H functionalization has emerged as a superior alternative in that context. 1,3-Azoles and their benzo counterparts have been extensively functionalized exploiting both noble and earth-abundant transition metals. Lately, C-2 functionalization have gained much traction due to the ease of attaining high regioselectivity and installation of synthetically manipulative functionalities. This critical review presents a bird's eye view of all major C-2 functionalization of (benz)azoles catalyzed by a diverse set of metals performed over the past 15 years.

Ligand-free Pd/Ag-mediated dehydrogenative alkynylation of imidazole derivatives

A variety of 2-alkynyl(benzo)imidazoles have been synthesized by dehydrogenative alkynylation of (benzo)imidazoles with terminal alkyne in NMP under air in the presence of Ag₂CO₃ as the oxidant and Pd(OAc)₂ as the catalyst precursor. The data obtained in this study support a reaction mechanism involving a non-concerted metalation deprotonation (n-CMD) pathway.

The regioselective synthesis of 2-alkynyl(benz)imidazoles was successfully achieved by Pd(ii)/Ag(i)-mediated dehydrogenative alkynylation of the corresponding (benz)imidazoles with terminal alkynes in an open vessel.

Copper-Catalyzed Oxidative Cross-Coupling of Electron-Deficient Polyfluorophenylboronate Esters with Terminal Alkynes

We report herein a mild procedure for the copper-catalyzed oxidative cross-coupling of electron-deficient polyfluorophenylboronate esters with terminal alkynes. This method displays good functional group tolerance and broad substrate scope, generating cross-coupled alkynyl(fluoro)arene products in moderate to excellent yields. Thus, it represents a simple alternative to the conventional Sonogashira reaction.

Cross-Dehydrogenative Alkynylation: A Powerful Tool for the Synthesis of Internal Alkynes

Alkynes are among the most fundamentally important organic compounds and are widely used in synthetic chemistry, biochemistry, and materials science. Thus, the development of an efficient and sustainable method for the preparation of alkynes has been a central concern in organic synthesis. Cross-dehydrogenative coupling utilizing E-H and Z-H bonds in two different molecules can avoid the need for prefunctionalization of starting materials and has become one of the most straightforward methods for the construction of E-Z chemical bonds. This Review summarizes recent progress in the preparation of internal alkynes by cross-dehydrogenative coupling with terminal alkynes.

Facile synthesis of 2-alkynyl oxazoles via a Ce(OTf)3-catalyzed cascade reaction of alkynyl carboxylic acids with tert-butyl isocyanide

We developed an efficient and novel protocol to synthesize 2-alkynyl oxazoles from tert-butyl isocyanide and alkynyl carboxylic acids. This method allowed the synthesis of diversely functionalized oxazoles under mild reaction conditions, coupled with operational simplicity and these functionalized oxazoles showed a certain degree of biological activity. Moreover, compounds 2b, 2h, 2k, 2n, 2p and 2t exhibited good anticancer activities in human gastric cancer cells (MGC803) and human bladder tumor cells (T24), with IC₅₀ below 20.0 μM.

A study on the reaction of 3-alkyl(aryl)imidazo[1,5-a]pyridines with ninhydrin

The reaction of 3-alkyl(aryl)imidazo[1,5-a]pyridines (1) with ninhydrin in dichloromethane at room temperature delivered good yields of the respective 2-hydroxy-2-(imidazo[1,5-a]pyridine-1-yl)indene-1,3-diones. In the presence of dimethyl acetylenedicarboxylate (DMAD), this uncatalyzed electrophilic substitution reaction, involving C-1 (in 1) and the central C=O (in ninhydrin), takes precedence over the three-component 1,4-dipolar cycloaddition reaction. This selectivity is probably due to the higher electrophilicity of the carbonyl carbon-2 in ninhydrin as compared to that of the sp-carbon atoms in DMAD, augmented with the high nucleophilicity of carbon-1 in 1.

Multicomponent Reaction Based Synthesis of 1-Tetrazolylimidazo[1,5- a]pyridines

A series of unprecedented tetrazole-linked imidazo[1,5-a]pyridines are synthesized from simple and readily available building blocks. The reaction sequence involves an azido-Ugi-deprotection reaction followed by an acetic anhydride-mediated N-acylation–cyclization process to afford the target heterocycle. Furthermore, the scope of the methodology was extended to diverse R₃-substitutions by employing commercial anhydrides, acid chlorides, and acids as an acyl component. The scope for the postmodification reactions are explored and the usefulness of the synthesis is exemplified by an improved three-step synthesis of a guanylate cyclase stimulator.

Rh(iii)-Catalyzedortho-C–H alkynylation ofN-phenoxyacetamides with hypervalent iodine-alkyne reagents at room temperature

Directing group ONHR preservedortho-alkynylation under mild conditions catalyzed by rhodium is reported.

Ligand-Enabled Alkynylation of C(sp3 )-H Bonds with Palladium(II) Catalysts

The palladium(II)-catalyzed β- and γ-alkynylation of amide C(sp³ )-H bonds is enabled by pyridine-based ligands. This alkynylation reaction is compatible with substrates containing α-tertiary or α-quaternary carbon centers. The β-methylene C(sp³ )-H bonds of various carbocyclic rings were also successfully alkynylated.

Imidazo[1,5-a]pyridin-3-ylidenes as π-accepting carbene ligands: substituent effects on properties of N-heterocyclic carbenes

Imidazo[1,5-a]pyridine-derived NHCs gained strong π-accepting character due to their structural features.

Multimetallic catalysed radical oxidative C(sp(3))-H/C(sp)-H cross-coupling between unactivated alkanes and terminal alkynes

Radical involved transformations are now considered as extremely important processes in modern organic synthetic chemistry. According to the demand by atom-economic and sustainable chemistry, direct C(sp³)–H functionalization through radical oxidative coupling represents an appealing strategy for C–C bond formations. However, the selectivity control of reactive radical intermediates is still a great challenge in these transformations. Here we show a selective radical oxidative C(sp³)–H/C(sp)–H cross-coupling of unactivated alkanes with terminal alkynes by using a combined Cu/Ni/Ag catalytic system. It provides a new way to access substituted alkynes from readily available materials. Preliminary mechanistic studies suggest that this reaction proceeds through a radical process and the C(sp³)–H bond cleavage is the rate-limiting step. This study may have significant implications for controlling selective C–C bond formation of reactive radical intermediates by using multimetallic catalytic systems.

Cross coupling via the activation of two carbon-hydrogen bonds avoids the need for organometallic coupling partners and associated waste. Here, the authors report a radical process that allows selective coupling between alkynes and non-activated C(sp³)-H groups via a multimetallic catalytic system.

Well-defined palladium(ii) complexes for ligand-enabled C(sp(3))-alkynylation

The first example of ligand-enabled C(sp(3))-alkynylation of 8-methylquinoline is reported. The reaction is catalysed by well-defined Pd(ii) complexes. The present C(sp(3))-alkynylation has a broad substrate scope as well as functional group tolerance and proceeds efficiently under mild conditions.

Rhodium(iii)-catalyzed C7-position C–H alkenylation and alkynylation of indolines

A Rh(iii)-catalyzed regioselective C–H alkenylation and alkynylation of indolines is described. This protocol relies on the use of a removable pyridinyl directing group to access valuable C-7 functionalized indoline scaffolds with ample substrate scope and broad functional group tolerance.

Ni(ii)-catalyzed dehydrative alkynylation of unactivated (hetero)aryl C–H bonds using oxygen: a user-friendly approach

Ni(ii)-catalyzed dehydrative alkynylation of unactivated C(sp²)–H bonds with terminal alkynes under atmospheric pressure of oxygen is described.

Controlled regiodivergent C-H bond activation of imidazo[1,5-a]pyridine via synergistic cooperation between aluminum and nickel

The catalytic method features a cooperative interaction between Ni and Al imparting remote C-H alkenylation at the C5 position of imidazo[1,5-a]pyridine with alkynes at mild conditions. Exclusion of AlMe3 switches the selectivity to the C3 position. Reactions with styrene and other olefinic substrates affording C5-adducts by Ni/Al catalysis are also included.