Fluorescein Analogues as Photoremovable Protecting Groups Absorbing at ∼520 nm

Wavelength-Selective Xanthene-Based Monochromophoric Photoremovable Protecting Groups for Tuning Soft Matter Material Properties

Photocontrolled deprotection of specific functional groups has garnered significant interest over the past two decades. Notably, the selective deprotection of distinct groups based on wavelength has emerged as a prominent focus in recent research. The achievement of this objective has primarily involved the utilization of linker-based bichromophoric systems and diverse cocktail mixtures of photoresponsive protecting groups (PRPGs), each responsive to varying wavelengths of light. Herein, we present the first wavelength-selective monochromophoric system based on a hydroxanthene moiety, enabling the wavelength-selective release of two distinct functionalities under 450 and 600 nm light, respectively. The mechanism of the wavelength-selective photodegradation was thoroughly investigated by 1H NMR, UV-vis, and fluorescence spectroscopy, suggesting a proton-coupled electron transfer mechanism in the first photorelease step and electron transfer based arylmethyl type of photorelease in the second step. The utility of the xanthene-based wavelength-selective PRPGs was demonstrated in the multistep degradation of microparticles and dual-color tuning of polymer chain architecture, thus opening an avenue to design advanced photoreactive wavelength-controlled systems for applications in soft matter materials.

Light in a Heartbeat: Bond Scission by a Single Photon above 800 nm

Photocages enable scientists to take full control over the activity of molecules using light as a biocompatible stimulus. Their emerging applications in photoactivated therapies call for efficient uncaging in the near-infrared (NIR) window, which represents a fundamental challenge. Here, we report synthetically accessible cyanine photocages that liberate alcohol, phenol, amine, and thiol payloads upon irradiation with NIR light up to 820 nm in aqueous media. The photocages display a unique chameleon-like behavior and operate via two distinct uncaging mechanisms: photooxidation and heterolytic bond cleavage. The latter process constitutes the first example of a direct bond scission by a single photon ever observed in cyanine dyes or at wavelengths exceeding 800 nm. Modulation of the beating rates of human cardiomyocytes that we achieved by light-actuated release of adrenergic agonist etilefrine at submicromolar concentrations and low NIR light doses (∼12 J cm-2) highlights the potential of these photocages in biology and medicine.

Giving the Green Light to Photochemical Uncaging of Large Biomolecules in High Vacuum

The isolation of biomolecules in a high vacuum enables experiments on fragile species in the absence of a perturbing environment. Since many molecular properties are influenced by local electric fields, here we seek to gain control over the number of charges on a biopolymer by photochemical uncaging. We present the design, modeling, and synthesis of photoactive molecular tags, their labeling to peptides and proteins as well as their photochemical validation in solution and in the gas phase. The tailored tags can be selectively cleaved off at a well-defined time and without the need for any external charge-transferring agents. The energy of a single or two green photons can already trigger the process, and it is soft enough to ensure the integrity of the released biomolecular cargo. We exploit differences in the cleavage pathways in solution and in vacuum and observe a surprising robustness in upscaling the approach from a model system to genuine proteins. The interaction wavelength of 532 nm is compatible with various biomolecular entities, such as oligonucleotides or oligosaccharides.

meso-Methyl BODIPY Photocages: Mechanisms, Photochemical Properties, and Applications

meso-methyl BODIPY photocages have recently emerged as an exciting new class of photoremovable protecting groups (PPGs) that release leaving groups upon absorption of visible to near-infrared light. In this Perspective, we summarize the development of these PPGs and highlight their critical photochemical properties and applications. We discuss the absorption properties of the BODIPY PPGs, structure-photoreactivity studies, insights into the photoreaction mechanism, the scope of functional groups that can be caged, the chemical synthesis of these structures, and how substituents can alter the water solubility of the PPG and direct the PPG into specific subcellular compartments. Applications that exploit the unique optical and photochemical properties of BODIPY PPGs are also discussed, from wavelength-selective photoactivation to biological studies to photoresponsive organic materials and photomedicine.

Rhodamine-Sensitized Two-Photon Activation of a Red Light-Absorbing BODIPY Photocage

Two-photon (2P) activatable probes are of high value in biological and medical chemistry since near infrared (NIR) light can penetrate deeply even in blood-perfused tissue and due to the intrinsic three-dimensional activation properties. Designing two-photon chromophores is challenging. However, the two-photon absorption qualities of a photocage can be improved with an intramolecular sensitizer, which transfers the absorbed light onto the cage. We herein present the synthesis and photophysical characterization of a 2P-sensitive uncaging dyad based on rhodamine 101 as donor fluorophore and a redshifted BODIPY as acceptor photocage. Liberation of p-nitroaniline (PNA) upon one-photon photolysis was confirmed by HPLC analysis. The photoreaction was found to be accompanied by a considerable change of the fluorescence properties of the chromophores. The possibility of a fluorescent read-out enabled the detection of two-photon induced uncaging by confocal fluorescence microscopy.

Turning Red without Feeling Embarrassed─Xanthenium-Based Photocages for Red-Light-Activated Phototherapeutics

Herein, we present high-yielding, concise access to a set of xanthenium-derived, water-soluble, low-molecular-weight photocages allowing light-controlled cargo release in the green to red region. Very importantly, these new photocages allow installation of various payloads through ester, carbamate, or carbonate linkages even at the last stage of the synthesis. Payloads were uncaged with high efficiency upon green, orange, or red light irradiation, leading to the release of carboxylic acids, phenols, and amines. The near-ideal properties of a carboxanthenium derivative were further evaluated in the context of light-controlled drug release using a camptothecin-derived chemotherapeutic drug, SN38. Notably, the caged drug showed orders of magnitude lower efficiency in cellulo, which was reinstated after red light irradiation. The presented photocages offer properties that facilitate the translation of photoactivated chemotherapy toward clinical applications.

Molecular platforms based on biocompatible photoreactions for photomodulation of biological targets

Photoirradiation provides a convenient and biocompatible approach for spatiotemporal modulation of biological systems with photoresponsive components. The construction of molecular platforms with a photoresponse to be integrated into biomolecules for photomodulation has been of great research interest in optochemical biology. In this review, we summarize typical molecular platforms that are integratable with biomolecules for photomodulation purposes. We categorize these molecular platforms according to their excitation light source, namely ultraviolet (UV), visible (Vis) or near-infrared (NIR) light. The protype chemistry of these molecular platforms is introduced along with an overview of their most recent applications for spatiotemporal regulation of biomolecular function in living cells or mice models. Challenges and the outlook are also presented. We hope this review paper will contribute to further progress in the development of molecular platforms and their biomedical use.

Photoremovable Protecting Groups: Across the Light Spectrum to Near- Infrared Absorbing Photocages

We discuss the past decade of progress in the field of photoremovable protecting groups that allowed the development of photocages activatable by near-IR light and highlight the individual conceptual advancements that lead to general guidelines to design new such photoremovable protecting groups. We emphasize the importance of understanding the individual photochemical reaction mechanisms that was necessary to achieve this progress and provide an outlook of the subsequent steps to facilitate a swift translation of this research into clinical praxis. Since this issue of CHIMIA is dedicated to the late Prof. Thomas Bally, we decided to provide a personal perspective on the field to which he contributed himself. We tried to write this review with the general readership of CHIMIA in mind in a hope to pay a tribute to the extraordinary dedication and clarity with which Thomas Bally used to explain abstract chemical concepts to his students or colleagues. We are uncertain whether we matched such challenge but we believe that he would have liked such approach very much.

Synthesis and UV-irradiation of photocaged nitrobenzyl-BODIPY derivatives

Two different photocaged 2-nitrobenzyl-BODIPY derivatives were designed and synthesized, where the 2-nitrobenzyl phototrigger is either directly attached to the meso position of BODIPY or through a phenoxy linker. The photochemical and photophysical properties of the two constructs were studied and their fluorescence quantum yields were determined. The ultraviolet irradiation of the two photocaged BODIPYs demonstrated a twofold fluorescence enhancement accompanying the uncaging of the BODIPY with the directly attached phototrigger, while the second switchable dyad with the phenoxy linker retains its essentially unaltered emissive behavior.

Solar-to-hydrogen peroxide energy conversion on resorcinol-formaldehyde resin photocatalysts prepared by acid-catalysed polycondensation

The photocatalytic generation of hydrogen peroxide from water and dioxygen (H₂O + 1/2O₂ → H₂O₂, ΔG° = +117 kJ mol^-1) under sunlight is a promising strategy for the artificial photosynthesis of a liquid fuel. We had previously found that resorcinol-formaldehyde (RF) resin powders prepared by the base-catalysed high-temperature hydrothermal method act as semiconductor photocatalysts for H₂O₂ generation. Herein, we report that RF resins prepared by the acid-catalysed high-temperature hydrothermal method (~523 K) using common acids at pH < 4 exhibit enhanced photocatalytic activity. The base- and acid-catalysed methods both produce methylene- and methine-bridged resins consisting of π-conjugated and π-stacked benzenoid-quinoid donor-acceptor resorcinol units. The acidic conditions result in the resins with a lower bandgap (1.7 eV) and higher conductivity because the lower-degree of crosslinking creates a strongly π-stacked architecture. The irradiation of the RF-acid resins with simulated sunlight in water with atmospheric-pressure O₂ generates H₂O₂ at a solar-to-chemical conversion efficiency of 0.7%, which is the highest efficiency ever reported for powder catalysts used in artificial photosynthesis.

Amino Acids Bearing Aromatic or Heteroaromatic Substituents as a New Class of Ligands for the Lysosomal Sialic Acid Transporter Sialin

Sialin, encoded by the SLC17A5 gene, is a lysosomal sialic acid transporter defective in Salla disease, a rare inherited leukodystrophy. It also enables metabolic incorporation of exogenous sialic acids, leading to autoantibodies against N-glycolylneuraminic acid in humans. Here, we identified a novel class of human sialin ligands by virtual screening and structure-activity relationship studies. The ligand scaffold is characterized by an amino acid backbone with a free carboxylate, an N-linked aromatic or heteroaromatic substituent, and a hydrophobic side chain. The most potent compound, 45 (LSP12-3129), inhibited N-acetylneuraminic acid 1 (Neu5Ac) transport in a non-competitive manner with IC₅₀ ≈ 2.5 μM, a value 400-fold lower than the K_M for Neu5Ac. In vitro and molecular docking studies attributed the non-competitive character to selective inhibitor binding to the Neu5Ac site in a cytosol-facing conformation. Moreover, compound 45 rescued the trafficking defect of the pathogenic mutant (R39C) causing Salla disease. This new class of cell-permeant inhibitors provides tools to investigate the physiological roles of sialin and help develop pharmacological chaperones for Salla disease.

A near-infrared light-mediated cleavable linker strategy using the heptamethine cyanine chromophore

Optical methods offer the potential to manipulate living biological systems with exceptional spatial and temporal control. Caging bioactive molecules with photocleavable functional groups is an important strategy that could be applied to a range of problems, including the targeted delivery of otherwise toxic therapeutics. However existing approaches that require UV or blue light are difficult to apply in organismal settings due to issues of tissue penetration and light toxicity. Photocaging groups built on the heptamethine cyanine scaffold enable the targeted delivery of bioactive molecules using near-IR light (up to 780nm) in live animal settings. Here we provide a detailed procedure demonstrating the utility of the heptamethine cyanine caging group to create a light-cleavable linker between an antibody, panitumumab, and a therapeutic small molecule in the duocarmycin class of natural products. Descriptions of the design and synthesis of the small molecule component, assembly of the antibody conjugate, in vitro analysis of uncaging, in vivo imaging, and impact on tumor progression are provided.

Water-Soluble BODIPY Photocages with Tunable Cellular Localization

Photoactivation of bioactive molecules allows manipulation of cellular processes with high spatiotemporal precision. The recent emergence of visible-light excitable photoprotecting groups has the potential to further expand the established utility of the photoactivation strategy in biological applications by offering higher tissue penetration, diminished phototoxicity, and compatibility with other light-dependent techniques. Nevertheless, a critical barrier to such applications remains the significant hydrophobicity of most visible-light excitable photocaging groups. Here, we find that applying the conventional 2,6-sulfonation to meso-methyl BODIPY photocages is incompatible with their photoreaction due to an increase in the excited state barrier for photorelease. We present a simple, remote sulfonation solution to BODIPY photocages that imparts water solubility and provides control over cellular permeability while retaining their favorable spectroscopic and photoreaction properties. Peripherally disulfonated BODIPY photocages are cell impermeable, making them useful for modulation of cell-surface receptors, while monosulfonated BODIPY retains the ability to cross the cellular membrane and can modulate intracellular targets. This new approach is generalizable for controlling BODIPY localization and was validated by sensitization of mammalian cells and neurons by visible-light photoactivation of signaling molecules.

Sanger's Reagent Sensitized Photocleavage of Amide Bond for Constructing Photocages and Regulation of Biological Functions

Photolabile groups offer promising tools to study biological processes with high spatial and temporal control. In the investigation, we designed and prepared several new glycine amide derivatives of Sanger's reagent and demonstrated that they serve as a new class of photocages for Zn²⁺ and an acetylcholinesterase (AChE) inhibitor. We showed that the mechanism for photocleavage of these substances involves initial light-driven cyclization between the 2,4-dinitrophenyl and glycine methylene groups to form acyl benzimidazole N-oxides, which undergo secondary photoinduced decarboxylation in association with rupture of an amide bond. The cleavage reactions proceed with modest to high quantum yields. We demonstrated that these derivatives can be used in targeted intracellular delivery of Zn²⁺, fluorescent imaging by light-triggered Zn²⁺ release, and regulation of biological processes including the enzymatic activity of carbonic anhydrase (CA), negative regulation of N-methyl-d-aspartate receptors (NMDARs), and pulse rate of cardiomyocytes. The successful proof-of-concept examples described above open a new avenue for using Sanger's reagent-based glycine amides as photocages for the exploration of complex cellular functions and signaling pathways.

Aminofluoresceins Versus Fluorescein: Ascertained New Unusual Features of Tautomerism and Dissociation of Hydroxyxanthene Dyes in Solution

Within the course of this spectroscopic research, we revealed novel features of the protolytic behavior, which extend the knowledge of the chemistry of xanthene dyes and rationalize the utilization of these compounds. In addition to the well-known tautomerism of the molecular form, H₂R, of fluorescein dyes, new aspects of tautomeric transformation of anions are disclosed. First, for the dyes bearing the substituents in the phthalic acid residue, 4'- and 5'-aminofluoresceins and 4'-fluorescein isothiocyanate, the monoanion HR^- exists in non-hydrogen-bond donor solvents not only as a tautomer with the ionized carboxylic and nonionized OH group but also as a "phenolate" ion with a nonionized COOH group. Such state of HR^- ions is typical for dyes bearing halogen atoms or NO₂ groups in the xanthene moiety but was not observed until now in the case of substitution in the phthalic residue. Second, the possibility of the existence of the HR^- species in DMSO in the form of colorless lactone is deduced for the 5'-aminofluorescein using the visible and infrared spectra. This results in a dramatic difference in medium effects. For instance, whereas for fluorescein in DMSO, the inversion of the stepwise ionization constants takes place and the K_a1/K_a2 value equals 0.08, the same ratio for 5'-aminofluorescein is as high as ∼800. In addition, the pK_a values of sulfonefluorescein, erythrosin, methyl ether of fluorescein, and phenol red were obtained to verify the acidity scale in DMSO and to support the detailed scheme of protolytic equilibria of fluorescein dyes.

Push-Pull Stilbene: Visible Light Activated Photoremovable Protecting Group for Alcohols and Carboxylic Acids with Fluorescence Reporting Employed for Drug Delivery

For the first time we have utilized push-pull stilbene as a visible light activated photoremovable protecting group (PRPG) for the uncaging of alcohols and carboxylic acids. The PRPG efficiently release caged molecules with good photochemical quantum yield. It is capable of monitoring the release in real time owing to its fluorescence "turn on" phenomenon upon photorelease in polar medium. The efficient photorelease and real time monitoring abilities of push-pull stilbene were employed for in vitro drug delivery.

Synthesis of Diversely Functionalized 2 H-Chromenes through Pd-Catalyzed Cascade Reactions of 1,1-Dibromoolefin Derivatives with Arylboronic Acids

In this work, an unprecedented synthesis of (2 H-chromen-2-ylidene)acetates and (2 H-chromen-2-ylidene)ethanones with controlled stereoselectivity via Pd-catalyzed cascade reactions of 3-(2-(2,2-dibromovinyl)phenoxy)acrylates or 3-(2-(2,2-dibromovinyl)phenoxy)enones with aryl boronic acids has been established. This protocol combines two C-C bond forming reactions (an intermolecular Suzuki coupling followed by an intramolecular Heck coupling) in one pot under the catalysis of the same catalyst. Compared with literature methods for the preparation of 2 H-chromene derivatives, it has advantages such as easily obtainable or commercially available substrates, diverse substitution pattern of products, simple procedure, and excellent stereoselectivity. Interestingly, this cascade reaction could distinguish the subtle difference of the electron-withdrawing capacity and the size of various functional groups and thus resulted in a different chemoselectivity. In addition, the utility of the (2 H-chromen-2-ylidene)acetate thus obtained was showcased by its facile transformation into the synthetically and photophysically significant 3 H-xanthen-3-one derivative.

S,S-Chiral Linker Induced U Shape with a Syn-facial Sensitizer and Photocleavable Ethene Group

There is a major need for light-activated materials for the release of sensitizers and drugs. Considering the success of chiral columns for the separation of enantiomer drugs, we synthesized an S,S-chiral linker system covalently attached to silica with a sensitizer ethene near the silica surface. First, the silica surface was modified to be aromatic rich, by replacing 70% of the surface groups with (3-phenoxypropyl)silane. We then synthesized a 3-component conjugate [chlorin sensitizer, S,S-chiral cyclohexane and ethene building blocks] in 5 steps with a 13% yield, and covalently bound the conjugate to the (3-phenoxypropyl)silane-coated silica surface. We hypothesized that the chiral linker would increase exposure of the ethene site for enhanced ¹ O₂ -based sensitizer release. However, the chiral linker caused the sensitizer conjugate to adopt a U shape due to favored 1,2-diaxial substituent orientation; resulting in a reduced efficiency of surface loading. Further accentuating the U shape was π-π stacking between the (3-phenoxypropyl)silane and sensitizer. Semiempirical calculations and singlet oxygen luminescence data provided deeper insight into the sensitizer's orientation and release. This study has lead to insight on modifications of surfaces for drug photorelease and can help lead to the development of miniaturized photodynamic devices.

Green-Light-Sensitive BODIPY Photoprotecting Groups for Amines

We describe a series of easily accessible, visible-light-sensitive (λ > 500 nm) BODIPY (boron-dipyrromethene)-based photoprotecting groups (PPGs) for primary and secondary amines, based on a carbamate linker. The caged compounds are stable under aqueous conditions for 24 h and can be efficiently uncaged in vitro with visible light (λ = 530 nm). These properties allow efficient photodeprotection of amines, rendering these novel PPGs potentially suitable for various applications, including the delivery of caged drugs and their remote activation.

Visible-light-activated photoCORMs: rational design of CO-releasing organic molecules absorbing in the tissue-transparent window

Rational design of visible-light-activatable transition-metal-free CO-releasing molecules with an emphasis on mechanistic details of the CO release.

In Search of the Perfect Photocage: Structure-Reactivity Relationships in meso-Methyl BODIPY Photoremovable Protecting Groups

A detailed investigation of the photophysical parameters and photochemical reactivity of meso-methyl BODIPY photoremovable protecting groups was accomplished through systematic variation of the leaving group (LG) and core substituents as well as substitutions at boron. Efficiencies of the LG release were evaluated using both steady-state and transient absorption spectroscopies as well as computational analyses to identify the optimal structural features. We find that the quantum yields for photorelease with this photocage are highly sensitive to substituent effects. In particular, we find that the quantum yields of photorelease are improved with derivatives with higher intersystem crossing quantum yields, which can be promoted by core heavy atoms. Moreover, release quantum yields are dramatically improved by boron alkylation, whereas alkylation in the meso-methyl position has no effect. Better LGs are released considerably more efficiently than poorer LGs. We find that these substituent effects are additive, for example, a 2,6-diiodo-B-dimethyl BODIPY photocage features quantum yields of 28% for the mediocre LG acetate and a 95% quantum yield of release for chloride. The high chemical and quantum yields combined with the outstanding absorption properties of BODIPY dyes lead to photocages with uncaging cross sections over 10 000 M^-1 cm^-1, values that surpass cross sections of related photocages absorbing visible light. These new photocages, which absorb strongly near the second harmonic of an Nd:YAG laser (532 nm), hold promise for manipulating and interrogating biological and material systems with the high spatiotemporal control provided by pulsed laser irradiation, while avoiding the phototoxicity problems encountered with many UV-absorbing photocages. More generally, the insights gained from this structure-reactivity relationship may aid in the development of new highly efficient photoreactions.

Redox-responsive xanthene–coumarin–chlorambucil-based FRET-guided theranostics for “activatable” combination therapy with real-time monitoring

A FRET-based theranostic agent, xanthene–coumarin–chlorambucil, exhibited redox-responsive “activatable” synergic treatment involving PDT and chemotherapy with fluorescence-change from green to blue.

Nonmetallic carbon monoxide releasing molecules (CORMs)

Recent progress on nonmetallic carbon monoxide releasing molecules (CORMs) is reviewed.

An Unprecedented Photochemical Reaction for Anthracene-Containing Derivatives

A series of anthracene-containing derivatives have been synthesised and characterised. The photochemical behaviour of these derivatives have been investigated by ¹ H NMR spectroscopy. An unprecedented photolysis reaction for anthracene-containing derivatives was observed in the case of anthracenes directly armed with a -CH₂ O-R group upon UV irradiation. The photolysis reaction process has been demonstrated to occur in three steps. Firstly, the anthracene-containing derivatives are converted into the corresponding endoperoxide intermediate upon UV irradiation in the presence of air; then, the endoperoxide intermediate is decomposed to the corresponding starting compound and 9-anthraldehyde; finally, 9-anthraldehyde is further oxidised to anthraquinone. Additionally, the photolysis reaction of anthracene-containing derivatives is significantly promoted in the presence of a thiacalix[4]arene platform.

Unexpected Photo-instability of 2,6-Sulfonamide-Substituted BODIPYs and Its Application to Caged GABA

Investigation of the unexpected photo-instability of 2,6-sulfonamide-substituted derivatives of the boron dipyrromethene (BODIPY) fluorophore led to the discovery of a photoreaction accompanied by multiple bond scissions. We characterized the photoproducts and utilized the photoreaction to design a caged γ-aminobutyric acid (GABA) derivative that can release GABA upon irradiation in the visible range (>450 nm). This allowed us to stimulate neural cells in mouse brain slices.

Efficient Red Light Photo-Uncaging of Active Molecules in Water Upon Assembly into Nanoparticles

We introduce a means of efficiently photo-uncaging active compounds from amino-1,4-benzoquinone in aqueous environments. Aqueous photochemistry of this photocage with one-photon red light is typically not efficient unless the photocaged molecules are allowed to assemble into nanoparticles. A variety of biologically active molecules were functionalized with the photocage and subsequently formulated into water-dispersible nanoparticles. Red light irradiation through various mammalian tissues achieved efficient photo-uncaging. Co-encapsulation of NIR fluorescent dyes and subsequent photomodulation provides a NIR fluorescent tool to assess both particle location and successful photorelease.

meso-Methylhydroxy BODIPY: a scaffold for photo-labile protecting groups

Here, we show that by installing a meso-methylhydroxy moiety, the boron dipyrromethene (BODIPY) scaffold can be converted into an efficient caging group, removable by green light. We describe caging and uncaging of important chemical functionalities and demonstrate green light mediated control over biological processes in cultured cell lines and neurons.

Searching for Improved Photoreleasing Abilities of Organic Molecules

Photoremovable protecting groups (PPGs) are chemical auxiliaries that provide spatial and temporal control over the release of various molecules: bioagents (neurotransmitters and cell-signaling molecules, Ca(2+) ions), acids, bases, oxidants, insecticides, pheromones, fragrances, etc. A major challenge for the improvement of PPGs lies in the development of organic chromophores that release the desired bioagents upon continuous irradiation at wavelengths above 650 nm, that is, in the tissue-transparent window. Understanding of the photorelease reaction mechanisms, investigated by laser flash photolysis and rationalized with the aid of quantum chemical calculations, allows for achieving this goal. In particular, simple Hückel calculations provide useful guidelines for designing new PPGs, because both the lowest excited singlet and triplet states of conjugated systems can be reasonably well described by a single electronic configuration formed by promotion of a single electron from the highest occupied molecular orbital (HOMO) to the lowest unoccupied MO (LUMO) of the ground state configuration. Here we show that Hückel calculations permit rapid identification of common features in the nodal properties of the frontier orbitals of various chromophores that can be classified into distinct chromophore families. If the electronic excitation involves a substantial electron density transfer to an sp(2) carbon atom at which HOMO and LUMO are nearly disjoint, for example, by virtue of symmetry, favorable photoheterolysis can be expected when the corresponding atom carries a leaving group at the α-position. We show examples of photoheterolytic reactions that indicate that the efficiency of photoheterolysis diminishes for chromophores absorbing in the NIR region. We provide a rationale for more efficient photoheterolytic reactions occurring via the triplet state, and we demonstrate the advantages of this mechanistic pathway. Analogies in the structure-reactivity relationships of PPGs can therefore lead to new strategies for the development of more efficient NIR-absorbing photoremovable protecting groups.