Designing Conical Intersections for Light-Driven Single Molecule Rotary Motors: From Precessional to Axial Motion

Unraveling the effect of aromaticity for the dynamics of excited states of single benzene fluorophores

The photophysical properties of a series of recently synthesized single benzene fluorophores were investigated using ensemble density functional theory calculations. The energetic stability of the ground and excited state species were counterposed against the aromaticity index derived from local vibrational modes. It was found that the large Stokes shift of the fluorophores (up to ca. 5800 cm  - 1 ) originates from the effect of electron donating and electron withdrawing substituents rather than π -delocalization and related (anti-)aromaticity. On the basis of nonadiabatic molecular dynamics simulations, the absence of fluorescence from one of the regioisomers was explained by the occurrence of easily accessible S  1 /S  0 conical intersections below the vertical excitation energy level. It is demonstrated in the manuscript that the analysis of local mode force constants and the related aromaticity index represent a useful tool for the characterization of π -delocalization effects in π -conjugated compounds.

Excited State Dynamics in Unidirectional Photochemical Molecular Motors

Unidirectional photochemically driven molecular motors (PMMs) convert the energy of absorbed light into continuous rotational motion. As such they are key components in the design of molecular machines. The prototypical and most widely employed class of PMMs is the overcrowded alkenes, where rotational motion is driven by successive photoisomerization and thermal helix inversion steps. The efficiency of such PMMs depends upon the speed of rotation, determined by the rate of ground state thermal helix inversion, and the quantum yield of photoisomerization, which is dependent on the excited state energy landscape. The former has been optimized by synthetic modification across three generations of overcrowded alkene PMMs. These improvements have often been at the expense of photoisomerization yield, where there remains room for improvement. In this perspective we review the application of ultrafast spectroscopy to characterize the excited state dynamics in PMMs. These measurements lead to a general mechanism for all generations of PMMs, involving subpicosecond decay of a Franck-Condon excited state to populate a dark excited state which decays within picoseconds via conical intersections with the electronic ground state. The model is discussed in the context of excited state dynamics calculations. Studies of PMM photochemical dynamics as a function of solvent suggest exploitation of intramolecular charge transfer and solvent polarity as a route to controlling photoisomerization yield. A test of these ideas for a first generation motor reveals a high degree of solvent control over isomerization yield. These results suggest a pathway to fine control over the performance of future PMMs.

Excited-State Dynamics Simulations of a Light-Driven Molecular Motor in Solution

Molecular motors, where light can be transformed into motion, are promising in the design of nanomechanical devices. For applications, however, finding relationships between molecular motion and the environment is important. Here, we report the study of excited-state dynamics of an overcrowded alkene in solution using a hybrid quantum mechanics/molecular mechanics (QM/MM) approach combined with excited-state molecular dynamics simulations. Using QM/MM surface-hopping trajectories, we calculated time-resolved emission and transient absorption spectra. These show the rise of a short-lived Franck-Condon state, followed by the formation of a dark state in the first 150 fs before the molecular motor relaxes to the ground state in about 1 ps. From the analysis of radial distribution functions, we infer that the orientation of the solvent with respect to the molecular motor in the electronic excited state is similar to that in the ground state during the photoisomerization.

Highly Efficient Oxindole-Based Molecular Photoswitches

3-Benzylidene-indoline-2-ones play a prominent role in the pharmaceutical industry due to the diverse biomedical applications of oxindole heterocycles. Despite the extensive reports on their biological properties, these compounds have hardly been studied for their photochemical activity. Here, we present 3-benzylidene-indoline-2-ones as a promising class of photoswitches with high yields, robust photochemical switching with quantum yields reaching up to 50 % and potential for biological applications.

Ultrafast Photocontrolled Rotation in a Molecular Motor Investigated by Machine Learning-Based Nonadiabatic Dynamics Simulations

The thermal helix inversion (THI) of the overcrowded alkene-based molecular motors determines the speed of the unidirectional rotation due to the high reaction barrier in the ground state, in comparison with the ultrafast photoreaction process. Recently, a phosphine-based motor has achieved all-photochemical rotation experimentally, promising to be controlled without a thermal step. However, the mechanism of this photochemical reaction has not yet been fully revealed. The comprehensive computational studies on photoisomerization still resort to nonadiabatic molecular dynamics (NAMD) simulations based on electronic structure calculations, which remains a high computational cost for large systems such as molecular motors. Machine learning (ML) has become an accelerating tool in NAMD simulations recently, where excited-state potential energy surfaces (PESs) are constructed analytically with high accuracy, providing an efficient approach for simulations in photochemistry. Herein the reaction pathway is explored by a spin-flip time-dependent density functional theory (SF-TDDFT) approach in combination with ML-based NAMD simulations. According to our computational simulations, we notice that one of the key factors of fulfilling all-photochemical rotation in the phosphine-based motor is that the excitation energies of four isomers are similar. Additionally, a shortcut photoinduced transformation between unstable isomers replaces the THI step, which shares the conical intersection (CI) with photoisomerization. In this study, we provide a practical approach to speed up the NAMD simulations in photochemical reactions for a large system that could be extended to other complex systems.

Control of Photoconversion Yield in Unidirectional Photomolecular Motors by Push-Pull Substituents

Molecular motors based on the overcrowded alkene motif convert light energy into unidirectional mechanical motion through an excited state isomerization reaction. The realization of experimental control over conversion efficiency in these molecular motors is an important goal. Here, we combine the synthesis of a novel "push-pull" overcrowded alkene motor with photophysical characterization by steady state and ultrafast time-resolved electronic spectroscopy. We show that tuning of the charge transfer character in the excited state has a dramatic effect on the photoisomerization yield, enhancing it to near unity in nonpolar solvents while largely suppressing it in polar solvents. This behavior is explained through reference to solvent- and substituent-dependent potential energy surfaces and their effect on conical intersections to the ground state. These observations offer new routes to the fine control of motor efficiency and introduce additional degrees of freedom in the synthesis and exploitation of light-driven molecular motors.

A visible-light-driven molecular motor based on barbituric acid

We present a class of visible-light-driven molecular motors based on barbituric acid. Due to a serendipitous reactivity we observed during their synthesis, these motors possess a tertiary stereogenic centre on the upper half, characterised by a hydroxy group. Using a combination of femto- and nanosecond transient absorption spectroscopy, molecular dynamics simulations and low-temperature 1H NMR experiments we found that these motors operate similarly to push-pull second-generation overcrowded alkene-based molecular motors. Interestingly, the hydroxy group at the stereocentre enables a hydrogen bond with the carbonyl groups of the barbituric acid lower half, which drives a sub-picosecond excited-state isomerisation, as observed spectroscopically. Computational simulations predict an excited state "lasso" mechanism where the intramolecular hydrogen bond pulls the molecule towards the formation of the metastable state, with a high predicted quantum yield of isomerisation (68%) in gas phase.

Simultaneously improving the efficiencies of photo- and thermal isomerization of an oxindole-based light-driven molecular rotary motor by a structural redesign

We designed a novel highly efficient light-driven molecular rotary motor theoretically by using electronic structure calculations and nonadiabatic dynamics simulations, and it showed excellent performance for both photo- and thermal isomerization processes simultaneously. By the small structural modification based on 3-(2,7-dimethyl-2,3-dihydro-1H-inden-1-ylidene)-1-methylindolin-2-one (DDIYM) synthesized by Feringa et al. recently, an oxindole-based light-driven molecular rotary motor, 3-(1,5-dimethyl-4,5-dihydrocyclopenta[b]pyrrol-6(1H)-ylidene)-1-methylindolin-2-one (DDPYM), is proposed, which displays a significant electronic push-pull character and weak steric hindrance for double-bond isomerization. The newly designed motor DDPYM shows a remarkable improvement of the quantum yield for both EP → ZM and ZP → EM photoisomerization processes, compared to the original motor DDIYM. Furthermore, the rotary motion in photoisomerization processes of DDPYM behaves more like a pure axial rotational motion approximately, while that of DDIYM is an obvious precessional motion. The weakness of the steric hindrance reduces the energy barriers of the thermal helix EM → EP and ZM → ZP inversion steps, and would accelerate two ground-state isomerization steps significantly. Our results confirm the feasibility of simultaneously improving the efficiencies of photo- and thermal isomerization of oxindole-based light-driven molecular rotary motors and this design idea sheds light on the future development of more efficient molecular motors.

Towards the engineering of a photon-only two-stroke rotary molecular motor

The rational engineering of photoresponsive materials, e.g., light-driven molecular motors, is a challenging task. Here, we use structure-related design rules to prepare a prototype molecular rotary motor capable of completing an entire revolution using, exclusively, the sequential absorption of two photons; i.e., a photon-only two-stroke motor. The mechanism of rotation is then characterised using a combination of non-adiabatic dynamics simulations and transient absorption spectroscopy measurements. The results show that the rotor moiety rotates axially relative to the stator and produces, within a few picoseconds at ambient T, an intermediate with the same helicity as the starting structure. We discuss how such properties, that include a 0.25 quantum efficiency, can help overcome the operational limitations of the classical overcrowded alkene designs.

Generalized Formulation of the Density Functional Tight Binding-Based Restricted Ensemble Kohn-Sham Method with Onsite Correction to Long-Range Correction

We present a generalized formulation for the combination of the density functional tight binding (DFTB) approach and the state-interaction state-average spin-restricted ensemble-referenced Kohn-Sham (SI-SA-REKS or SSR) method by considering onsite correction (OC) as well as the long-range corrected (LC) functional. The OC contribution provides more accurate energies and analytic gradients for individual microstates, while the multireference character of the SSR provides the correct description for conical intersections. We benchmark the LC-OC-DFTB/SSR method against various DFTB calculation methods for excitation energies and conical intersection structures with π/π* or n/π* characters. Furthermore, we perform excited-state molecular dynamics simulations with a molecular rotary motor with variations of LC-OC-DFTB/SSR approaches. We show that the OC contribution to the LC functional is crucial to obtain the correct geometry of conical intersections.

Controlling rotary motion of molecular motors based on oxindole

Molecular motors are essential components of artificial molecular machines, which can be used to manipulate and amplify mechanical motion at the nanoscale to create machine-like function. Since the discovery of light-driven rotary molecular motors, the field has been widely developed, including the introduction of molecular motors based on oxindole by our group in 2019. The rotational properties of molecular motors, e.g. absorption wavelength, quantum yield and rotation speed, often critically depend on substituent effects. Up to now, the substituent effects of oxindole-based molecular motors have not yet been investigated. Herein, we present a family of oxindole-based molecular motors functionalised at three different positions on the motor core, with either CN or OMe groups. The motors prepared in this work retain the favourable features of oxindole-based motors, i.e. simple synthesis and visible light addressability. We find that functionalisation has substantial effects on the absorption wavelength of the motors, meanwhile the rotation speed is unaffected. Furthermore, we found that functionalisation of the oxindole molecular motors increases their quantum efficiency considerably in comparison to previous motors of their class.

We present a new family of oxindole-based functionalised at three positions on the upper and lower halves, with methoxy or cyano groups. We find that this allows the absorption wavelength and quantum yields of these motors to be tuned.

Designing light-driven rotary molecular motors

The ability to induce and amplify motion at the molecular scale has seen tremendous progress ranging from simple molecular rotors to responsive materials. In the two decades since the discovery of light-driven rotary molecular motors, the development of these molecules has been extensive; moving from the realm of molecular chemistry to integration into dynamic molecular systems. They have been identified as actuators holding great potential to precisely control the dynamics of nanoscale devices, but integrating molecular motors effectively into evermore complex artificial molecular machinery is not trivial. Maximising efficiency without compromising function requires conscious and judicious selection of the structures used. In this perspective, we focus on the key aspects of motor design and discuss how to manipulate these properties without impeding motor integrity. Herein, we describe these principles in the context of molecular rotary motors featuring a central double bond axle and emphasise the strengths and weaknesses of each design, providing a comprehensive evaluation of all artificial light-driven rotary motor scaffolds currently present in the literature. Based on this discussion, we will explore the trajectory of research into the field of molecular motors in the coming years, including challenges to be addressed, potential applications, and future prospects.

Effect of charge-transfer enhancement on the efficiency and rotary mechanism of an oxindole-based molecular motor

Harvesting energy and converting it into mechanical motion forms the basis for both natural and artificial molecular motors. Overcrowded alkene-based light-driven rotary motors are powered through sequential photochemical and thermal steps. The thermal helix inversion steps are well characterised and can be manipulated through adjustment of the chemical structure, however, the insights into the photochemical isomerisation steps still remain elusive. Here we report a novel oxindole-based molecular motor featuring pronounced electronic push-pull character and a four-fold increase of the photoisomerization quantum yield in comparison to previous motors of its class. A multidisciplinary approach including synthesis, steady-state and transient absorption spectroscopies, and electronic structure modelling was implemented to elucidate the excited state dynamics and rotary mechanism. We conclude that the charge-transfer character of the excited state diminishes the degree of pyramidalisation at the alkene bond during isomerisation, such that the rotational properties of this oxindole-based motor stand in between the precessional motion of fluorene-based molecular motors and the axial motion of biomimetic photoswitches.

Excited State Structure Correlates with Efficient Photoconversion in Unidirectional Motors

The design of unidirectional photomolecular motors demands a critical understanding of an ultrafast photochemical isomerization. An intermediate dark excited state mediates the reaction via a conical intersection (CI) with the ground state, but a correlation between molecular structure and photoisomerization efficiency has remained elusive. Here femtosecond stimulated Raman spectroscopy captures vibrational spectra of the dark state in a set of molecular motors bearing different substituents. A direct correlation between isomerization quantum yield, dark state lifetime, and excited state vibrational spectrum is found. Electron withdrawing substituents lead to activity in lower frequency modes, which we correlate with a pyramidalization distortion at the ethylenic axle occurring within 100 fs. This structure is not formed with an electron donating substituent, where the axle retains double bond character. Further structural reorganization is observed and assigned to excited state reorganization and charge redistribution on the sub-picosecond time scale. The correlation of the dark state structure with photoconversion performance suggests guidelines for developing new more efficient motor derivatives.

Computational Comparison of Chemical and Isotopic Approaches to Control the Photoisomerization Dynamics of Light-Driven Molecular Motors

Synthetic molecular motors driven by E/Z photoisomerization reactions are able to produce unidirectional rotary motion because of a structural asymmetry that makes one direction of rotation more probable than the other. In most such motors, this asymmetry is realized through the incorporation of a chemically asymmetric carbon atom. Here, we present molecular dynamics simulations based on multiconfigurational quantum chemistry to investigate whether the merits of this approach can be equaled by an alternative approach that instead exploits isotopic chirality. By first considering an N-methylpyrrolidine–cyclopentadiene motor design, it is shown that isotopically chiral variants of this design undergo faster photoisomerizations than a chemically chiral counterpart, while maintaining rotary photoisomerization quantum yields of similarly high magnitude. However, by subsequently considering a pyrrolinium–cyclopentene design, it is also found that the introduction of isotopic chirality does not provide any control of the directionality of the photoinduced rotations within this framework. Taken together, the results highlight both the potential usefulness of isotopic rather than chemical chirality for the design of light-driven molecular motors, and the need for further studies to establish the exact structural circumstances under which this asymmetry is best exploited.

Machine Learning-Assisted Excited State Molecular Dynamics with the State-Interaction State-Averaged Spin-Restricted Ensemble-Referenced Kohn-Sham Approach

We present a machine learning-assisted excited state molecular dynamics (ML-ESMD) based on the ensemble density functional theory framework. Since we represent a diabatic Hamiltonian in terms of generalized valence bond ansatz within the state-interaction state-averaged spin-restricted ensemble-referenced Kohn-Sham (SI-SA-REKS) method, we can avoid singularities near conical intersections, which are crucial in excited state molecular dynamics simulations. We train the diabatic Hamiltonian elements and their analytical gradients with the SchNet architecture to construct machine learning models, while the phase freedom of off-diagonal elements of the Hamiltonian is cured by introducing the phase-less loss function. Our machine learning models show reasonable accuracy with mean absolute errors of ∼0.1 kcal/mol and ∼0.5 kcal/mol/Å for the diabatic Hamiltonian elements and their gradients, respectively, for penta-2,4-dieniminium cation. Moreover, by exploiting the diabatic representation, our models can predict correct conical intersection structures and their topologies. In addition, our ML-ESMD simulations give almost identical result with a direct dynamics at the same level of theory.

Powering rotary molecular motors with low-intensity near-infrared light

Light-controlled artificial molecular machines hold tremendous potential to revolutionize molecular sciences as autonomous motion allows the design of smart materials and systems whose properties can respond, adapt, and be modified on command. One long-standing challenge toward future applicability has been the need to develop methods using low-energy, low-intensity, near-infrared light to power these nanomachines. Here, we describe a rotary molecular motor sensitized by a two-photon absorber, which efficiently operates under near-infrared light at intensities and wavelengths compatible with in vivo studies. Time-resolved spectroscopy was used to gain insight into the mechanism of energy transfer to the motor following initial two-photon excitation. Our results offer prospects toward in vitro and in vivo applications of artificial molecular motors.

Vibrational coherence and quantum yield of retinal-chromophore-inspired molecular switches

UV-Vis transient absorption (TA) spectroscopy is used to carry out a systematic investigation of the ultrafast CC double photoisomerization dynamics and quantum yield of each isomer of a set of six chromophores based on the same retinal-inspired, indanylidene pyrrolinium (IP) molecular framework.

Conical Intersections in Organic Molecules: Benchmarking Mixed-Reference Spin-Flip Time-Dependent DFT (MRSF-TD-DFT) vs Spin-Flip TD-DFT

The mixed-reference spin-flip time-dependent density functional theory (MRSF-TD-DFT) method eliminates the erroneous spin contamination of the SF-TD-DFT methodology, while retaining the conceptual and practical simplicity of the latter. The availability of the analytic gradient of the energy of the MRSF-TD-DFT response states enables automatic geometry optimization of the targeted states. Here, we apply the new method to optimize the geometry of several S₁/S₀ conical intersections occurring in typical organic molecules. We demonstrate that MRSF-TD-DFT is capable of producing the correct double-cone topology of the intersections and describing the geometry of the lowest-energy conical intersections and their relative energies with accuracy matching that of the best multireference wavefunction ab initio methods. In this regard, MRSF-TD-DFT differs from many popular single-reference methods, such as, e.g., the linear response TD-DFT method, which fail to produce the correct topology of the intersections. As the new methodology completely eliminates the ambiguity with the identification of the response states as proper singlets or triplets, which is plaguing the SF-TD-DFT calculations, it can be used for automatic geometry optimization and molecular dynamic simulations not requiring constant human intervention.

Light on the Structural Evolution of Photoresponsive Molecular Switches in Electronically Excited States

Stimuli-responsive materials are attracting extensive interest as they offer the opportunity to transform external inputs such as light into a functionality by control at the molecular level. As a result, a large number of molecular building units have been developed that enable switching between two or more states. Since the trajectory describing the transition between the various states defines the efficiency of the usually immobilized unit and the resulting functionality, it does not suffice to merely consider the initial and final states of the switching process. A key challenge is in fact to decipher at the atomic scale the actual motion that takes place after photoexcitation. Understanding and being able to manipulate this trajectory is crucial for an efficient implementation of photoactive molecular switches into functional materials, as well as to rationally develop novel tailor-made materials. In this Concept article, we highlight the potential to characterize in detail photoinitiated switching mechanisms by combining quantum chemical calculations with advanced laser spectroscopic techniques that probe the vibrational manifold of electronically excited states and its evolution.

Exploring the Mechanism of a Chiral N-Alkyl Imine-Based Light-Driven Molecular Rotary Motor at MS-CASPT2//CASSCF and MS-CASPT2//(TD) DFT Levels

The working mechanism including the photoisomerization and thermal isomerization steps of a chiral N-alkyl imine-based motor synthesized by Lehn et al. are revealed by MS-CASPT2//CASSCF and MS-CASPT2//(TD-)DFT methods. For the photoisomerization process of the imine-based motor, it involves both the bright (π,π*) state and the dark (n,π*) state. In addition, the MECI has similar geometry and energy to the minimum of the S₁ state, which shows that the process is barrierless and keeps the unidirectionality of rotation well; the result confirms the imine-based motor is a good candidate for a light-driven molecular rotary motor. For the thermal isomerization process of the imine-based motor, there are two even isomerization paths: one with the mechanism of the in-plane N inversion, the energy barriers of which are 29.6 kcal mol^-1 at MS3-CASPT2//CAM-B3LYP level and 29.2 kcal mol^-1 at MS3-CASPT2//CASSCF level; the other with the mechanism of ring inversion of the cycloheptatriene moiety, with energy barriers of 28.1 kcal mol^-1 at MS3-CASPT2//CAM-B3LYP level and 18.1 kcal mol^-1 at MS3-CASPT2//CASSCF level. According to the structural feature of the stator moiety, the imine molecule can be used as a two-step or a four-step light-driven rotary motor.

Fulgides as Light-Driven Molecular Rotary Motors: Computational Design of a Prototype Compound

A new family of light-driven molecular rotary motors utilizing the fulgide motif is proposed and its prototype molecule is studied by quantum chemical calculations and nonadiabatic molecular dynamics simulations. The new motor performs pure unidirectional axial rotation of the rotor blade with high quantum efficiency (ϕ ∼ 0.55-0.68) and ultrafast dynamics (⟨ t⟩ _S1 ∼ 200-300 fs) of its successive photoisomerization steps. The photocyclization reaction typical of fulgide compounds is blocked by the design of the new motor and never occurred in the molecular dynamics simulations. The new motors can be synthesized from easily available precursors. In view of its remarkable photoisomerization ability, the new motor represents a prospective class of compounds for the use in nanosized molecular devices.

Molecular Photoswitching Aided by Excited-State Aromaticity

Central to the development of optoelectronic devices is the availability of efficient synthetic molecular photoswitches, the design of which is an arena where the evolving concept of excited-state aromaticity (ESA) is yet to make a big impact. The aim of this minireview is to illustrate the potential of this concept to become a key tool for the future design of photoswitches. The paper starts with a discussion of challenges facing the use of photoswitches for applications and continues with an account of how the ESA concept has progressed since its inception. Then, following some brief remarks on computational modeling of photoswitches and ESA, the paper describes two different approaches to improve the quantum yields and response times of switches driven by E/Z photoisomerization or photoinduced H-atom/proton transfer reactions through simple ESA considerations. It is our hope that these approaches, verified by quantum chemical calculations and molecular dynamics simulations, will help stimulate the application of the ESA concept as a general tool for designing more efficient photoswitches and other functional molecules used in optoelectronic devices.

Toward Fast and Efficient Visible-Light-Driven Molecular Motors: A Minimal Design

A key goal in the development of light-driven rotary molecular motors is to facilitate their usage in biology and medicine by shifting the required irradiation wavelengths from the UV regime to the nondestructive visible regime. Although some progress has been made toward this goal, most available visible-light-driven motors either have relatively low quantum yields or require that thermal steps follow the photoisomerizations that underlie the rotary motion. Here, a minimal design for visible-light-driven motors without these drawbacks is presented and evaluated on the basis of state-of-the-art quantum chemical calculations and molecular dynamics simulations. The design, featuring dihydropyridinium and cyclohexenylidene motifs and comprising only five conjugated double bonds, is found to produce a full 360° rotation through fast photoisomerizations (excited-state lifetimes of ≈170-250 fs) powered by photons with energies well below 3 eV.

Molecular rotary motors: Unidirectional motion around double bonds

The field of synthetic molecular machines has quickly evolved in recent years, growing from a fundamental curiosity to a highly active field of chemistry. Many different applications are being explored in areas such as catalysis, self-assembled and nanostructured materials, and molecular electronics. Rotary molecular motors hold great promise for achieving dynamic control of molecular functions as well as for powering nanoscale devices. However, for these motors to reach their full potential, many challenges still need to be addressed. In this paper we focus on the design principles of rotary motors featuring a double-bond axle and discuss the major challenges that are ahead of us. Although great progress has been made, further design improvements, for example in terms of efficiency, energy input, and environmental adaptability, will be crucial to fully exploit the opportunities that these rotary motors offer.

QTAIM and Stress Tensor Characterization of Intramolecular Interactions Along Dynamics Trajectories of a Light-Driven Rotary Molecular Motor

A quantum theory of atoms in molecules (QTAIM) and stress tensor analysis was applied to analyze intramolecular interactions influencing the photoisomerization dynamics of a light-driven rotary molecular motor. For selected nonadiabatic molecular dynamics trajectories characterized by markedly different S₁ state lifetimes, the electron densities were obtained using the ensemble density functional theory method. The analysis revealed that torsional motion of the molecular motor blades from the Franck-Condon point to the S₁ energy minimum and the S₁/S₀ conical intersection is controlled by two factors: greater numbers of intramolecular bonds before the hop-time and unusually strongly coupled bonds between the atoms of the rotor and the stator blades. This results in the effective stalling of the progress along the torsional path for an extended period of time. This finding suggests a possibility of chemical tuning of the speed of photoisomerization of molecular motors and related molecular switches by reshaping their molecular backbones to decrease or increase the degree of coupling and numbers of intramolecular bond critical points as revealed by the QTAIM/stress tensor analysis of the electron density. Additionally, the stress tensor scalar and vector analysis was found to provide new methods to follow the trajectories, and from this, new insight was gained into the behavior of the S₁ state in the vicinity of the conical intersection.

Ultrafast Dynamics in Light-Driven Molecular Rotary Motors Probed by Femtosecond Stimulated Raman Spectroscopy

Photochemical isomerization in sterically crowded chiral alkenes is the driving force for molecular rotary motors in nanoscale machines. Here the excited-state dynamics and structural evolution of the prototypical light-driven rotary motor are followed on the ultrafast time scale by femtosecond stimulated Raman spectroscopy (FSRS) and transient absorption (TA). TA reveals a sub-100-fs blue shift and decay of the Franck-Condon bright state arising from relaxation along the reactive potential energy surface. The decay is accompanied by coherently excited vibrational dynamics which survive the excited-state structural evolution. The ultrafast Franck-Condon bright state relaxes to a dark excited state, which FSRS reveals to have a rich spectrum compared to the electronic ground state, with the most intense Raman-active modes shifted to significantly lower wavenumber. This is discussed in terms of a reduced bond order of the central bridging bond and overall weakening of bonds in the dark state, which is supported by electronic structure calculations. The observed evolution in the FSRS spectrum is assigned to vibrational cooling accompanied by partitioning of the dark state between the product isomer and the original ground state. Formation of the product isomer is observed in real time by FSRS. It is formed vibrationally hot and cools over several picoseconds, completing the characterization of the light-driven half of the photocycle.

Combining the Advantages of Alkene and Azo E-Z Photoisomerizations: Mechanistic Insights into Ketoimine Photoswitches

We carried out CASPT2//(TD)DFT and CASPT2//CASSCF studies on the working mechanism of imine switches, including a camphorquinone-derived ketoimine (shortened as k-Imine) switch designed by Lehn as well as a model camphorquinone alkene-imine (a-Imine) proposed in this study. Under the experimental conditions (light irradiation with 455 and 365 nm for E and Z, respectively), k-Imine is excited to the S₁:(n_N,π*) state and then decays toward a perpendicular intermediate following the C═N bond rotation coordinate. During the bond rotation, a mild energy barrier caused by the strong interaction of S₁:(n_N,π*) and S₂:(n_O,π*) states will more or less slow down the rotation speed of k-Imine. The large difference in irradiation light wavelength supports k-Imine as a two-way photoswitch. The photoisomerization of a-Imine obeys a similar but fully barrierless pattern while requiring a higher excitation energy to reach the (n_N,π*) state. The good directionality of thermal isomerization toward E(a-Imine), plus the barrierless photoisomerization, allows for the design of a thermal and photo-operated switch. For both imines, a minimal-energy crossing point (MECI) located at the perpendicular region, with low relative energy and close to the rotary path, ensures the directionality of C═N bond rotation and confirms imines as optimal candidates for photoswitches and motors.

Proton-Gated Photoisomerization of Amino-Substituted Dibenzofulvene Rotors

Derivatives of 9-(2,2,2-triphenylethylidene)-fluorene (TEF) undergo E/Z photoisomerization and are candidates for light-powered molecular actuators and switches. The 2-substituted derivatives bearing an amino group (ATEF) or a dimethylamino group (DTEF) are weakly photoactive in the absence of acids, but protonation increases photoisomerization quantum yields by factors of 30-60. Such compounds may be useful for incorporation into pH-switchable photoactive devices.

Light-driven rotary molecular motors without point chirality: a minimal design

Despite lacking a stereocenter, light-driven cyclohexenylidene-pyrrolinium molecular motors achieve unidirectional rotary motion through the asymmetry afforded by the puckered cyclohexenylidene.

A QTAIM and stress tensor investigation of the torsion path of a light-driven fluorene molecular rotary motor

The utility of the QTAIM/stress tensor analysis method for characterizing the photoisomerization of light driven molecular rotary machines is investigated on the example of the torsion path in fluorene molecular motor. The scalar and vector descriptors of QTAIM/stress tensor reveal additional information on the bonding interactions between the rotating units of the motor, which cannot be obtained from the analysis of the ground and excited state potential energy surfaces. The topological features of the fluorene motor molecular graph display that, upon the photoexcitation a certain increase in the torsional stiffness of the rotating bond can be attributed to the increasing topological stability of the rotor carbon atom attached to the rotation axle. The established variations in the torsional stiffness of the rotating bond may cause transfer of certain fraction of the torsional energy to other internal degrees of freedom, such as the pyramidalization distortion. © 2016 Wiley Periodicals, Inc.

Direct Observation of a Dark State in the Photocycle of a Light-Driven Molecular Motor

Controlling the excited-state properties of light driven molecular machines is crucial to achieving high efficiency and directed functionality. A key challenge in achieving control lies in unravelling the complex photodynamics and especially in identifying the role played by dark states. Here we use the structure sensitivity and high time resolution of UV-pump/IR-probe spectroscopy to build a detailed and comprehensive model of the structural evolution of light driven molecular rotors. The photodynamics of these chiral overcrowded alkene derivatives are determined by two close-lying excited electronic states. The potential energy landscape of these “bright” and “dark” states gives rise to a broad excited-state electronic absorption band over the entire mid-IR range that is probed for the first time and modeled by quantum mechanical calculations. The transient IR vibrational fingerprints observed in our studies allow for an unambiguous identification of the identity of the “dark” electronic excited state from which the photon’s energy is converted into motion, and thereby pave the way for tuning the quantum yield of future molecular rotors based on this structural motif.

On the possibility to accelerate the thermal isomerizations of overcrowded alkene-based rotary molecular motors with electron-donating or electron-withdrawing substituents

We employ computational methods to investigate the possibility of using electron-donating or electron-withdrawing substituents to reduce the free-energy barriers of the thermal isomerizations that limit the rotational frequencies achievable by synthetic overcrowded alkene-based molecular motors. Choosing as reference systems one of the fastest motors known to date and two variants thereof, we consider six new motors obtained by introducing electron-donating methoxy and dimethylamino or electron-withdrawing nitro and cyano substituents in conjugation with the central olefinic bond connecting the two (stator and rotator) motor halves. Performing density functional theory calculations, we then show that electron-donating (but not electron-withdrawing) groups at the stator are able to reduce the already small barriers of the reference motors by up to 18 kJ mol(-1). This result outlines a possible strategy for improving the rotational frequencies of motors of this kind. Furthermore, exploring the origin of the catalytic effect, it is found that electron-donating groups exert a favorable steric influence on the thermal isomerizations, which is not manifested by electron-withdrawing groups. This finding suggests a new mechanism for controlling the critical steric interactions of these motors. Graphical Abstract The introduction of electron-donating groups in one of the fastest rotary molecular motors known to date is found to reduce the free-energy barriers of the thermal steps that limit the rotational frequencies by up to 18 kJ mol(-1).

Organic linkers control the thermosensitivity of the emission intensities from Tb(iii) and Eu(iii) in a chameleon polymer

Thermosensitivity of emission intensity in a polymer comprised Tb³⁺ and Eu³⁺ can be controlled by the energy level of the organic linker-centered triplet state as well as that of the ligand-centered triplet state.

Thermometers whose emission color gradually changes with temperature are called chameleon emitters. In this study, we discuss the mechanism of the thermosensitivity of the emission color of polymers that contain two lanthanides (Ln³⁺), e.g., [Tb_0.99Eu_0.01(hfa)₃(linker)]_n, where the Ln³⁺(hfa)₃ complexes (hfa: hexafluoro acetylacetonato) are connected by a phosphine oxide “linker” molecule. First, the difference in the thermosensitivities of the emissions from Tb³⁺ and Eu³⁺ are discussed. With increasing temperature, the green-emission intensity from Tb³⁺ decreases whereas the red-emission intensity from Eu³⁺ does not change. This was found to originate from the different reaction barriers for the quenching of the Ln³⁺ excited state via the intersystem crossing (ISC) between the hfa-centered triplet state and the ground state. Next, the excitation energy transfer (EET) from Tb³⁺ to Eu³⁺ is discussed. Although the direct EET between Ln³⁺ atoms is negligible because of the long distance between them, stepwise EET is found to occur via the linker-centered triplet state with a reasonable barrier. Thus, we propose a new idea—thermosensitivity can be controlled by the linker as well as by the ligand (hfa). To confirm the role of the linker, four phosphine oxides were examined. The thermosensitivity dependence on the linker is validated via experimental measurements.