Palladium(II)-Catalyzed Desulfitative Synthesis of Aryl Ketones from Sodium Arylsulfinates and Nitriles: Scope, Limitations, and Mechanistic Studies

Synthesis of easily-modified and useful dibenzo-[b,d]azepines by palladium(II)-catalyzed cyclization/addition with a green solvent

A novel strategy in which palladium(II)-catalyzed tandem cyclization is used to obtain N-heterocyclic architectures containing a seven-membered ring has been developed and used to synthesize a series of derivatives. The reaction uses an eco-friendly mixed solvent (water : EtOH = 2 : 1) instead of DMSO and maintains a high yield (91%). Its potential application value and reaction mechanism have also been explored.

Chiral TPE Foldamers in Macrocycles: Aggregation Enhanced Emission and Circularly Polarized Luminescence

Chiral macrocycles with circularly polarized luminescence (CPL) have attracted increasing attention due to the rigid structure, symmetrical chiral geometry and large luminescence dissymmetry factors (glum ). However, most chiral macrocycles are more emissive in solutions but have weakened fluorescence quantum yields (ΦF ) in aggregates, limiting their further application. In this paper, chiral macrocycle R/S-PhTPE was synthesized by combining chiral macrocycle architectonics with Z-o-phenyltetraphenylethylene (PhTPE) foldamer. Enhanced solution state emission and characteristic aggregation enhanced emission (AEE) effect can be observed for R/S-PhTPE due to the folded PhTPE conformation. Macrocycle immobilization and folded conformation endow PhTPE moiety with stable helical conformation. Most importantly, R/S-PhTPE exhibits opposite CPL signals compared with common chiral TPEs, demonstrating the evident impact of folded conformation. This work reports the first and deep insights into the chiroptical properties of chiral PhTPE foldamers, and will provide a new strategy to tune ΦF and CPL signals of AIE active chiral macrocycles.

Metal-catalyzed reactions of organic nitriles and boronic acids to access diverse functionality

The nitrile or cyano (-CN) group is one of the most appreciated and effective functional groups in organic synthesis, having a polar unsaturated C-N triple bond. Despite sufficient stability and being intrinsically inert, the nitrile group can be easily transformed into many other functional groups, such as amines, carboxylic acids, ketones, etc. which makes it a vital group in organic synthesis. On the other hand, despite several boronic acids having a low level of genotoxicity, they have found wide applicability in the field of organic synthesis, especially in transition metal-catalyzed cross-coupling reactions. Recently, transition-metal-catalyzed cascade additions or addition/cyclization processes of boronic acids to the nitrile group open up exciting and useful strategies to prepare a variety of functional molecules through the formation of C-C, C-N and CO bonds. Boronic acids can be added to the cyano functionality through catalytic carbometallation or through a radical cascade process to provide newer pathways for the rapid construction of various important acyclic ketones or amides, carbamidines, carbocycles and N,O-heterocycles. The present review focuses on various transition-metal-catalyzed additions of boronic acids via carbometallation or radical cascade processes using the cyano group as an acceptor.

Supported Palladium Nanoparticles Catalyzed Intermolecular Carbopalladation of Nitriles and Organoboron Compounds

The first heterogeneous catalyzed example for the direct synthesis of aromatic ketones via intermolecular carbopalladation of aliphatic nitriles and organoboron compounds was developed. This mild method proceeds with a supported palladium nanoparticles catalyst that could be reused and recycled five times. The fresh and used catalysts were characterized by XPS and TEM. The XPS analysis indicated that Pd0 was the active species for the reaction. This methodology provides a mild and cost-effective strategy for the efficient synthesis of ketones.

[3 + 2 + 1] Pyridine Skeleton Synthesis Using Acetonitrile as C4N1 Units and Solvent

The first [3 + 2 + 1] methodology for pyridine skeleton synthesis via cascade carbopalladation/cyclization of acetonitrile, arylboronic acids, and aldehydes was developed. This reaction proceeds via six step tandem reaction sequences involving the carbopalladation reaction of acetonitrile, a nucleophilic addition, a condensation, an intramolecular Michael addition, cyclization, and aromatization. Delightfully, both palladium acetate and supported palladium nanoparticles catalyzed this reaction with similar catalytic performance. The characterization results of the fresh and used supported palladium nanoparticle catalysts indicated that the reaction might be performed via a Pd(0)/Pd(II) catalytic cycle that began with Pd(0). Furthermore, the products showed good fluorescence characteristics. The green homogeneous/heterogenous catalytic methodologies pave a new way for constructing the pyridine skeleton.

Conformational Preference of 2'-Fluoro-Substituted Acetophenone Derivatives Revealed by Through-Space 1H-19F and 13C-19F Spin-Spin Couplings

The conformational properties of 2′-fluoro-substituted acetophenone derivatives were elucidated based on H^α–F and C^α–F through-space spin–spin couplings (TS-couplings), which occur between two atoms constrained at a distance smaller than the sum of their van der Waals radii. This study revealed that 2′-fluoro-substituted acetophenone derivatives in solutions form exclusively s-trans conformers by analyzing their NMR spectra focused on the TS-couplings. The magnitudes of the coupling constants ⁵J (H^α, F) and ⁴J (C^α, F) correlate linearly with the value of the dielectric constant of the solvents. Furthermore, s-trans conformations of the two derivatives were confirmed by X-ray crystallographic analysis. These conformational preferences were consistent with the DFT calculations. The s-cis conformer, in which fluorine and oxygen atoms lie in a syn-periplanar mode, may be subject to strong repulsion between the two polar atoms and become unstable. The s-trans preference of the 2′-fluoro-substituted acetophenone derivatives may be utilized in drug design.

Synthesis and applications of sodium sulfinates (RSO2Na): a powerful building block for the synthesis of organosulfur compounds

This review highlights the preparation of sodium sulfinates (RSO2Na) and their multifaceted synthetic applications. Substantial progress has been made over the last decade in the utilization of sodium sulfinates emerging as sulfonylating, sulfenylating or sulfinylating reagents, depending on reaction conditions. Sodium sulfinates act as versatile building blocks for preparing many valuable organosulfur compounds through S-S, N-S, and C-S bond-forming reactions. Remarkable advancement has been made in synthesizing thiosulfonates, sulfonamides, sulfides, and sulfones, including vinyl sulfones, allyl sulfones, and β-keto sulfones. The significant achievement of developing sulfonyl radical-triggered ring-closing sulfonylation and multicomponent reactions is also thoroughly discussed. Of note, the most promising site-selective C-H sulfonylation, photoredox catalytic transformations and electrochemical synthesis of sodium sulfinates are also demonstrated. Holistically, this review provides a unique and comprehensive overview of sodium sulfinates, which summarizes 355 core references up to March 2020. The chemistry of sodium sulfinate salts is divided into several sections based on the classes of sulfur-containing compounds with some critical mechanistic insights that are also disclosed.

Last Decade of Unconventional Methodologies for the Synthesis of Substituted Benzofurans

This review describes the progress of the last decade on the synthesis of substituted benzofurans, which are useful scaffolds for the synthesis of numerous natural products and pharmaceuticals. In particular, new intramolecular and intermolecular C-C and/or C-O bond-forming processes, with transition-metal catalysis or metal-free are summarized. (1) Introduction. (2) Ring generation via intramolecular cyclization. (2.1) C7a-O bond formation: (route a). (2.2) O-C2 bond formation: (route b). (2.3) C2-C3 bond formation: (route c). (2.4) C3-C3a bond formation: (route d). (3) Ring generation via intermolecular cyclization. (3.1) C7a-O and C3-C3a bond formation (route a + d). (3.2) O-C2 and C2-C3 bond formation: (route b + c). (3.3) O-C2 and C3-C3a bond formation: (route b + d). (4) Benzannulation. (5) Conclusion.

Cu-Catalyzed three-component coupling reactions using nitriles, 1,3-dienes and silylboranes

This paper reports novel Cu-catalyzed three-component coupling reactions using nitriles, 1,3-dienes and silylboranes. The desired reactions proceed at room temperature and yield β,γ-unsaturated ketones with a (dimethylphenylsilyl)methyl moiety at the α-position. Diverse nitriles participate in the reaction and the corresponding products were obtained in good to high yields with high regioselectivity.

Mechanistic Studies of the Palladium-Catalyzed Desulfinative Cross-Coupling of Aryl Bromides and (Hetero)Aryl Sulfinate Salts

Pyridine and related heterocyclic sulfinates have recently emerged as effective nucleophilic coupling partners in palladium-catalyzed cross-coupling reactions with (hetero)aryl halides. These sulfinate reagents are straightforward to prepare, stable to storage and coupling reaction conditions, and deliver efficient reactions, thus offering many advantages, compared to the corresponding boron-derived reagents. Despite the success of these reactions, there are only scant details of the reaction mechanism. In this study, we use structural and kinetic analysis to investigate the mechanism of these important coupling reactions in detail. We compare a pyridine-2-sulfinate with a carbocyclic sulfinate and establish different catalyst resting states, and turnover limiting steps, for the two classes of reagent. For the carbocyclic sulfinate, the aryl bromide oxidative addition complex is the resting state intermediate, and transmetalation is turnover-limiting. In contrast, for the pyridine sulfinate, a chelated Pd(II) sulfinate complex formed post-transmetalation is the resting-state intermediate, and loss of SO2 from this complex is turnover-limiting. We also investigated the role of the basic additive potassium carbonate, the use of which is crucial for efficient reactions, and deduced a dual function in which carbonate is responsible for the removal of free sulfur dioxide from the reaction medium, and the potassium cation plays a role in accelerating transmetalation. In addition, we show that sulfinate homocoupling is responsible for converting Pd(OAc)2 to a catalytically active Pd(0) complex. Together, these studies shed light on the challenges that must be overcome to deliver improved, lower temperature versions of these synthetically important processes.

Tandem addition/cyclization for synthesis of 2-aroyl benzofurans and 2-aroyl indoles by carbopalladation of nitriles

Pd-Catalyzed tandem reaction of 2-(2-acylphenoxy)acetonitriles or 2-((2-benzoylphenyl)amino)acetonitrile with arylboronic acids for the synthesis of 2-aroyl benzofurans and 2-aroyl indoles.

Rapid Deoxyfluorination of Alcohols with N-Tosyl-4-chlorobenzenesulfonimidoyl Fluoride (SulfoxFluor) at Room Temperature

The deoxyfluorination of alcohols is a fundamentally important approach to access alkyl fluorides, and thus the development of shelf-stable, easy-to-handle, fluorine-economical, and highly selective deoxyfluorination reagents is highly desired. This work describes the development of a crystalline compound, N-tosyl-4-chlorobenzenesulfonimidoyl fluoride (SulfoxFluor), as a novel deoxyfluorination reagent that possesses all of the aforementioned merits, which is rare in the arena of deoxyfluorination. Endowed by the multi-dimensional modulating ability of the sulfonimidoyl group, SulfoxFluor is superior to 2-pyridinesulfonyl fluoride (PyFluor) in fluorination rate, and is also superior to perfluorobutanesulfonyl fluoride (PBSF) in fluorine-economy. Its reaction with alcohols not only tolerates a wide range of functionalities including the more sterically hindered alcoholic hydroxyl groups, but also exhibits high fluorination/elimination selectivity. Because SulfoxFluor can be easily prepared from inexpensive materials and can be safely handled without special techniques, it promises to serve as a practical deoxyfluorination reagent for the synthesis of various alkyl fluorides.

Efficient Tandem Addition/Cyclization for Access to 2,4-Diarylquinazolines via Catalytic Carbopalladation of Nitriles

The first example of the palladium-catalyzed tandem addition/cyclization of 2-(benzylidenamino)benzonitriles with arylboronic acids has been developed. This transformation features good functional group tolerance and provides an alternative synthetic pathway to access 2,4-diarylquinazolines in moderate to good yields. A plausible mechanism for the formation of 2,4-diarylquinazolines involving sequential nucleophilic addition followed by an intramolecular cyclization is proposed.

Pd-Catalyzed decarboxylative alkynylation of alkynyl carboxylic acids with arylsulfonyl hydrazides via a desulfinative process

The decarboxylative alkynylation of alkynyl carboxylic acids and arylsulfonyl hydrazides by desulfinative coupling could provide aryl alkynes in satisfactory yields by either judiciously selecting palladium catalysts or modulating phosphine ligands under mild conditions.

Halo-substituted benzenesulfonyls and benzenesulfinates: convenient sources of arenes in metal-catalyzed C–C bond formation reactions for the straightforward access to halo-substituted arenes

The use of halo-substituted ArSO₂R as an aryl source in metal-catalyzed C–C bond formation reactions presents several advantages, as the reaction often proceeds without cleavage of the C–halo bonds.

Regiocontrolled Synthesis of α-Sulfonylmethyl o-Nitrostyrenes via ZnI2-Mediated Sulfonylation and AgNO2/Pd(PPh3)4-Promoted o-Nitration

We report herein the AgNO₂/Pd(PPh₃)₄-promoted regiocontrolled o-nitration of α-sulfonylmethylstyrenes in MeNO₂ with good yields. The o-nitration process provides a series of sulfonyl o-nitrostyrenes. Substituted α-sulfonylmethylstyrenes were synthesized from ZnI₂-mediated sulfonylation of substituted α-methylstyrenes and sodium sulfinates (RSO₂Na) in MeCN with good to excellent yields. The structures of the key products were confirmed by X-ray crystallography. A plausible mechanism has been proposed herein.

Understanding MAOS through computational chemistry

Computational chemistry may explain and rationalize the impact of microwave irradiation in organic synthesis.

Palladium-catalyzed tandem addition/cyclization in aqueous medium: synthesis of 2-arylindoles

Pd-catalyzed tandem reaction of potassium aryltrifluoroborates with nitriles for the synthesis of 2-arylindoles in aqueous medium.

A phosphine-free, heterogeneous palladium-catalyzed atom-efficient carbonylative cross-coupling of triorganoindiums with aryl halides leading to unsymmetrical ketones

A phosphine-free heterogeneous palladium-catalyzed carbonylative cross-coupling of triorganoindiums with aryl halides for the synthesis of unsymmetrical ketones has been described.

Three-component oxysulfenylation reaction: two simple and convenient approaches to β-alkoxy sulfides

An unprecedented method for the synthesis of β-alkoxy sulfides via a NaI/HBr-mediated three-component oxysulfenylation reaction of alkenes with arylsulfinic acids and alcohols is reported. Furthermore, I2-promoted oxysulfenylation of alkenes using sodium arylsulfinates instead of arylsulfinic acids to synthesise various β-alkoxy sulfides is also described.

Palladium-catalyzed C-3 desulfitative arylation of indolizines with sodium arylsulfinates and arylsulfonyl hydrazides

Derivatized indolizines were efficiently prepared by direct C-3 arylation of indolizines using sodium arylsulfinates and arylsulfonyl hydrazides in good yields.

Development of variously functionalized nitrile oxides

N-Methylated amides (N,4-dimethylbenzamide and N-methylcyclohexanecarboxamide) were systematically subjected to chemical transformations, namely, N-tosylation followed by nucleophilic substitution. The amide function was converted to the corresponding carboxylic acid, esters, amides, aldehyde, and ketone upon treatment with hydroxide, alkoxide, amine, diisobutylaluminium hydride and Grignard reagent, respectively. In these transformations, N-methyl-N-tosylcarboxamides behave like a Weinreb amide. Similarly, N-methyl-5-phenylisoxazole-3-carboxamide was converted into 3-functionalized isoxazole derivatives. Since the amide was prepared by the cycloaddition reaction of ethynylbenzene and N-methylcarbamoylnitrile oxide, the nitrile oxide served as the equivalent of the nitrile oxides bearing a variety of functional groups such as carboxy, alkoxycarbonyl, carbamoyl, acyl and formyl moieties.