Metal-Ion-Promoted Cleavage, Isomerization, and Desulfurization of the Diastereomeric Phosphoromonothioate Analogues of Uridylyl(3‘,5‘)uridine

Efficient Tandem Copper-Catalyzed Click Synthesis of Multisugar-Modified Oligonucleotides

Nucleic acids in the form of siRNA, antisense oligonucleotides or mRNA are currently explored as new promising modalities in the pharmaceutical industry. Particularly, the success of mRNA-vaccines against SARS-CoV-2, along with the successful development of the first sugar-modified siRNA therapeutics has inspired the field. The development of nucleic acid therapeutics requires efficient chemistry to link oligonucleotides to chemical structures that can improve stability, boost cellular uptake, or enable specific targeting. For the siRNA therapeutics currently in use, modification of the 3'-end of the oligonucleotides with triple-N-acetylgalactosamine (GalNAc)3 was shown to be of significance. This modification is currently achieved through cumbersome multistep synthesis and subsequent loading onto the solid support material. Herein, we report the development of a bifunctional click-reactive linker that allows the modification of oligonucleotides in a tandem click reaction with multiple sugars, regardless of the position within the oligonucleotide, with remarkable efficiency and in a one-pot reaction.

An ultrasensitive Cd2+ detection biosensor based on DNAzyme and CRISPR/Cas12a coupled with hybridization chain reaction

The detection of cadmium is essential because it poses a significant threat to human health and the environment. Recent advancements in biosensors that detect nonnucleic-acid targets using CRISPR/Cas12a in combination with aptamers or DNAzymes show promising performance. Herein, we integrated DNAzyme, hybridization chain reaction (HCR) and CRISPR/Cas12a into a single biosensor for the first time and realized the ultrasensitive detection of Cd2+. A single phosphorothioate ribonucleobase (rA)-containing oligonucleotide (PS substrate) and a Cd2+-specific DNAzyme (Cdzyme) are used for Cd2+ recognition, releasing short single-stranded DNA. Then, the HCR is triggered by the cleavage products for signal transduction and amplification. Next, the trans-cleavage activity of Cas12a is activated due to the presence of crRNA complementary strands and PAM sites in the HCR products. As a result, FQ-reporters are cleaved, and the fluorescence values can be easily read using a fluorometer, allowing Cd2+ quantification by measuring the fluorescent signal. The Cd2+ detection biosensor is ultrasensitive with a detection limit of 1.25 pM. Moreover, the biosensor shows great stability under different pH and various anion conditions. The proposed sensor was utilized for environmental water sample detection, demonstrating the dependability of the detection system. Considering the high sensitivity and reliable performance of the assay, it could be further used in environmental monitoring. In addition, the design strategy reported in this study could extend the application of CRISPR/Cas12a in heavy metal detection.

Modified Nucleosides, Nucleotides and Nucleic Acids via Click Azide-Alkyne Cycloaddition for Pharmacological Applications

The click azide = alkyne 1,3-dipolar cycloaddition (click chemistry) has become the approach of choice for bioconjugations in medicinal chemistry, providing facile reaction conditions amenable to both small and biological molecules. Many nucleoside analogs are known for their marked impact in cancer therapy and for the treatment of virus diseases and new targeted oligonucleotides have been developed for different purposes. The click chemistry allowing the tolerated union between units with a wide diversity of functional groups represents a robust means of designing new hybrid compounds with an extraordinary diversity of applications. This review provides an overview of the most recent works related to the use of click chemistry methodology in the field of nucleosides, nucleotides and nucleic acids for pharmacological applications.

Copper-Catalyzed Huisgen 1,3-Dipolar Cycloaddition Tailored for Phosphorothioate Oligonucleotides

An efficient method for attachment of a variety of reporter groups to oligonucleotides (ONs) is copper (I) [Cu(I)]-catalyzed Huisgen azide-alkyne 1,3-dipolar cycloaddition ("click reaction"). However, in the case of ONs with phosphorothioate modifications as internucleosidic linkages (PS-ONs), this conjugation method has to be adjusted to be compatible with the sulfur-containing groups. The method described here is adapted for PS-ONs, utilizes solid-supported ONs, and implements the Cu(I) bromide dimethyl sulfide complex (CuBr × Me₂ S) as a mediator for the click reaction. The solid-supported ONs can be readily transformed into "clickable ONs" by on-line addition of an alkyne-containing linker that subsequently can react with an azido-containing moiety (e.g., a peptide) in the presence of CuBr × Me₂ S. © 2019 by John Wiley & Sons, Inc. Basic Protocol 1: Conjugation on solid support Support Protocol: Removal of 4,4'-dimethoxytrityl group from amino linker Basic Protocol 2: Removal of protecting groups and cleavage from solid support Basic Protocol 3: HPLC purification.

Site Selective Antibody-Oligonucleotide Conjugation via Microbial Transglutaminase

Nucleic Acid Therapeutics (NATs), including siRNAs and AntiSense Oligonucleotides (ASOs), have great potential to drug the undruggable genome. Targeting siRNAs and ASOs to specific cell types of interest has driven dramatic improvement in efficacy and reduction in toxicity. Indeed, conjugation of tris-GalNAc to siRNAs and ASOs has shown clinical efficacy in targeting diseases driven by liver hepatocytes. However, targeting non-hepatic diseases with oligonucleotide therapeutics has remained problematic for several reasons, including targeting specific cell types and endosomal escape. Monoclonal antibody (mAb) targeting of siRNAs and ASOs has the potential to deliver these drugs to a variety of specific cell and tissue types. However, most conjugation strategies rely on random chemical conjugation through lysine or cysteine residues resulting in conjugate heterogeneity and a distribution of Drug:Antibody Ratios (DAR). To produce homogeneous DAR-2 conjugates with two siRNAs per mAb, we developed a novel two-step conjugation procedure involving microbial transglutaminase (MTGase) tagging of the antibody C-terminus with an azide-functionalized linker peptide that can be subsequently conjugated to dibenzylcyclooctyne (DBCO) bearing oligonucleotides through azide-alkyne cycloaddition. Antibody-siRNA (and ASO) conjugates (ARCs) produced using this strategy are soluble, chemically defined targeted oligonucleotide therapeutics that have the potential to greatly increase the number of targetable cell types.

Efficient Conjugation to Phosphorothioate Oligonucleotides by Cu-Catalyzed Huisgen 1,3-Dipolar Cycloaddition

Improving oligonucleotide delivery is critical for the further development of oligonucleotide-based therapeutics. Covalent attachment of reporter molecules is one of the most promising approaches toward efficient oligonucleotide-based therapies. An efficient methods for the attachment of a variety of reporter groups is Cu(I)-catalyzed Huisgen azide-alkyne 1,3-dipolar cycloaddition. However, the majority of potential oligonucleotide (ON) therapeutics in clinical trials are carrying phosphorothioate (PS) linkages, and this robust conjugation method is not yet established for these ONs due to a general concern of Cu-S interaction. Here, we developed a method allowing for efficient conjugation of peptides to PS oligonucleotides. The method utilizes solid supported oligonucleotides that can be readily transformed into "clickable ONs" by simple linker conjugation and further reacted with an azido containing moiety (e.g., a peptide) using the CuBr × Me₂S complex as a superior catalyst in that reaction. This study opens the way for further development of PS oligonucleotide-conjugates by means of efficient Cu(I)-catalyzed Huisgen azide-alkyne 1,3-dipolar cycloaddition.

Instantaneous Iodine-Assisted DNAzyme Cleavage of Phosphorothioate RNA

Metal ions play a critical role in the RNA-cleavage reaction by interacting with the scissile phosphate and stabilizing the highly negatively charged transition state. Many metal-dependent DNAzymes have been selected for RNA cleavage. Herein, we report that the Ce13d DNAzyme can use nonmetallic iodine (I₂) to cleave a phosphorothioate (PS)-modified substrate. The cleavage yield exceeded 60% for both the R_p and S_p stereoisomers in 10 s, while the yield without the enzyme strand was only ∼10%. The Ce13d cleavage with I₂ also required Na⁺, consistent with the property of Ce13d and confirming the similar role of I₂ as a metal ion. Ce13d had the highest yield among eight tested DNAzymes, with the second highest DNAzyme showing only 20% cleavage. The incomplete cleavage was due to competition from desulfurization and isomerization reactions. This DNAzyme was engineered for fluorescence-based I₂ detection. With EDTA for masking metal ions, I₂ was selectively detected down to 4.7 nM. Oxidation of I^- with Fe³⁺ produced I₂ in situ, allowing detection of Fe³⁺ down to 78 nM. By harnessing nonelectrostatic interactions, such as the I₂/sulfur interaction observed here, more nonmetal species might be discovered to assist DNAzyme-based RNA cleavage.

Phosphodiester models for cleavage of nucleic acids

Nucleic acids that store and transfer biological information are polymeric diesters of phosphoric acid. Cleavage of the phosphodiester linkages by protein enzymes, nucleases, is one of the underlying biological processes. The remarkable catalytic efficiency of nucleases, together with the ability of ribonucleic acids to serve sometimes as nucleases, has made the cleavage of phosphodiesters a subject of intensive mechanistic studies. In addition to studies of nucleases by pH-rate dependency, X-ray crystallography, amino acid/nucleotide substitution and computational approaches, experimental and theoretical studies with small molecular model compounds still play a role. With small molecules, the importance of various elementary processes, such as proton transfer and metal ion binding, for stabilization of transition states may be elucidated and systematic variation of the basicity of the entering or departing nucleophile enables determination of the position of the transition state on the reaction coordinate. Such data is important on analyzing enzyme mechanisms based on synergistic participation of several catalytic entities. Many nucleases are metalloenzymes and small molecular models offer an excellent tool to construct models for their catalytic centers. The present review tends to be an up to date summary of what has been achieved by mechanistic studies with small molecular phosphodiesters.

An Efficient Lanthanide-Dependent DNAzyme Cleaving 2'-5'-Linked RNA

RNA can form two types of linkage. In addition to the predominant 3'-5' linkage, 2'-5'-linked RNA is also important in biology, medicine, and prebiotic studies. Here, in vitro selection was used to isolate a DNAzyme that specifically cleaves 2'-5' RNA by using Ce(3+) as the metal cofactor, but leaves the 3'-5' counterpart intact. This Ce5 DNAzyme requires trivalent light lanthanide ions and shows a rate of 0.16 min(-1) in the presence of 10 μm Ce(3+) ; the activity decreases with heavier lanthanide ions. This is the fastest DNAzyme reported for this reaction, and it might enable applications in chemical biology. As a proof-of-concept, using this DNAzyme, the reactions between phosphorothioate-modified RNA and strongly thiophilic metals (Hg(2+) and Tl(3+) ) were studied as a function of pH.

Desulfurization Activated Phosphorothioate DNAzyme for the Detection of Thallium

Thallium (Tl) is a highly toxic heavy metal situated between mercury and lead in the periodic table. While its neighbors have been thoroughly studied for DNA-based sensing, little is known about thallium detection. In this work, in vitro selection of RNA-cleaving DNAzymes is carried out using Tl(3+) as the target metal cofactor. Both normal DNA and phosphorothioate (PS)-modified DNA are tested for this purpose. While no Tl(3+)-dependent DNAzymes are obtained, a DNA oligonucleotide containing a single PS-modified RNA nucleotide is found to cleave by ∼7% by Tl(3+) at the RNA position. The remaining 93% are desulfurized. By hybridization of this PS-modified oligonucleotide with the Tm7 DNAzyme, the cleavage yield increases to ∼40% in the presence of Tl(3+) and Er(3+). Tm7 is an Er(3+)-dependent RNA-cleaving DNAzyme. It cleaves only the normal substrate but is completely inactive using the PS-modified substrate. Tl(3+) desulfurizes the PS substrate to the normal substrate to be cleaved by Tm7 and Er(3+). This system is engineered into a catalytic beacon for Tl(3+) with a detection limit of 1.5 nM, which is below its maximal contamination limit defined by the U.S. Environmental Protection Agency (10 nM).

Rational evolution of Cd2+-specific DNAzymes with phosphorothioate modified cleavage junction and Cd2+ sensing

In vitro selection of RNA-cleaving DNAzymes is a powerful method for isolating metal-specific DNA. A few successful examples are known, but it is still difficult to target some thiophilic metals such as Cd²⁺ due to limited functional groups in DNA. While using modified bases expands the chemical functionality of DNA, a single phosphorothioate modification might boost its affinity for thiophilic metals without complicating the selection process or using bases that are not commercially available. In this work, the first such in vitro selection for Cd²⁺ is reported. After using a blocking DNA and negative selections to rationally direct the library outcome, a highly specific DNAzyme with only 12 nucleotides in the catalytic loop is isolated. This DNAzyme has a cleavage rate of 0.12 min⁻¹ with 10 μM Cd²⁺ at pH 6.0. The R_p form of the substrate is cleaved ∼100-fold faster than the S_p form. The DNAzyme is most active with Cd²⁺ and its selectivity against Zn²⁺ is over 100 000-fold. Its application in detecting Cd²⁺ is also demonstrated. The idea of introducing single modifications in the fixed region expands the scope of DNA/metal interactions with minimal perturbation of DNA structure and property.

Development of metal-ion containing catalysts for the decomposition of phosphorothioate esters

The widespread use of phosphorothioate esters as agricultural pesticides, chemical weapons and mechanistic probes in enzymology has sparked interest in the reactivity of these thio-substituted analogues of phosphate esters. In this brief account, we summarize the recent developments in our understanding of the mechanisms of hydrolysis (and solvolysis in methanol) of phosphorothioates containing a sulfur atom in the bridging and/or non-bridging position. A small number of highly efficient catalytic systems containing the metal ions La(III), Pd(II), Cu(II) and Zn(II) have been developed to promote the degradation of the various classes of phosphorothioate esters. The mechanisms of the base promoted solvolytic reactions in water and methanol and those of the metal catalyzed cleavage are presented, as well as a discussion of the energetics of the catalytic processes and other salient features. The aim of this review is to provide the reader with a contemporary physical organic description of phosphorothioate ester cleavage. This article is part of a Special Issue entitled: Chemistry and mechanism of phosphatases, diesterases and triesterases.

Discrimination in metal-ion binding to RNA dinucleotides with a non-bridging oxygen or sulfur in the phosphate diester link

Replacement of a non-bridging oxygen in the phosphate diester bond by a sulfur has become quite popular in nucleic acid research and is often used as a probe, for example, in ribozymes, where the normally essential Mg(2+) is partly replaced by a thiophilic metal ion to reactivate the system. Despite these widely applied rescue experiments no detailed studies exist quantifying the affinity of metal ions to such terminal sulfur atoms. Therefore, we performed potentiometric pH titrations to determine the binding properties of pUp((S))U(3-) towards Mg(2+), Mn(2+), Zn(2+), Cd(2+), and Pb(2+), and compared these data with those previously obtained for the corresponding pUpU(3-) complexes. The primary binding site in both dinucleotides is the terminal phosphate group. Theoretically, also the formation of 10-membered chelates involving the terminal oxygen or sulfur atoms of the (thio)phosphate bridge is possible with both ligands. The results show that Mg(2+) and Mn(2+) exist as open (op) isomers binding to both dinucleotides only at the terminal phosphate group. Whereas Cd(pUpU)(-) only exists as Cd(pUpU)(-)(op), Cd(pUp((S))U)(-) is present to about 64 % as the S-coordinated macrochelate, Cd(pUp((S))U)(-)(cl/PS). Zn(2+) forms with pUp((S))U(3-) three isomeric species, that is, Zn(pUp((S))U)(-)(op), Zn(pUp((S))U)(-)(cl/PO), and Zn(pUp((S))U)(-)(cl/PS), which occur to about 33, 12 (O-bound), and 55 %, respectively. Pb(2+) forms the 10-membered chelate with both nucleotides involving only the terminal oxygen atoms of the (thio)phosphate bridge, that is, no indication of S binding was discovered in this case. Hence, Zn(2+) and Cd(2+) show pronounced thiophilic properties, whereas Mg(2+), Mn(2+), and Pb(2+) coordinate to the oxygen, macrochelate formation being of relevance with Pb(2+) only.

Thio effects on the departure of the 3'-linked ribonucleoside from diribonucleoside 3',3'-phosphorodithioate diesters and triribonucleoside 3',3',5'-phosphoromonothioate triesters: implications for ribozyme catalysis

To provide a solid chemical basis for the mechanistic interpretations of the thio effects observed for large ribozymes, the cleavage of triribonucleoside 3',3',5'-phosphoromonothioate triesters and diribonucleoside 3',3'-phosphorodithioate diesters has been studied. To elucidate the role of the neighboring hydroxy group of the departing 3'-linked nucleoside, hydrolysis of 2',3'-O-methyleneadenosin-5'-yl bis[5'-O-methyluridin-3'-yl] phosphoromonothioate (1 a) has been compared to the hydrolysis of 2',3'-O-methyleneadenosin-5'-yl 5'-O-methyluridin-3'-yl 2',5'-di-O-methyluridin-3'-yl phosphoromonothioate (1 b) and the hydrolysis of bis[uridin-3'-yl] phosphorodithioate (2 a) to the hydrolysis of uridin-3'-yl 2',5'-di-O-methyluridin-3'-yl phosphorodithioate (2 b). The reactions have been followed by RP HPLC over a wide pH range. The phosphoromonothioate triesters 1 a,b undergo two competing reactions: the starting material is cleaved to a mixture of 3',3'- and 3',5'-diesters, and isomerized to 2',3',5'- and 2',2',5'-triesters. With phosphorodithioate diesters 2 a,b, hydroxide-ion-catalyzed cleavage of the P--O3' bond is the only reaction detected at pH >6, but under more acidic conditions desulfurization starts to compete with the cleavage. The 3',3'-diesters do not undergo isomerization. The hydroxide-ion-catalyzed cleavage reaction with both 1 a and 2 a is 27 times as fast as that compared with their 2'-O-methylated counterparts 1 b and 2 b. The hydroxide-ion-catalyzed isomerization of the 3',3',5'-triester to 2',3',5'- and 2',2',5'-triesters with 1 a is 11 times as fast as that compared with 1 b. These accelerations have been accounted for by stabilization of the anionic phosphorane intermediate by hydrogen bonding with the 2'-hydroxy function. Thio substitution of the nonbridging oxygens has an almost negligible influence on the cleavage of 3',3'-diesters 2 a,b, but the hydrolysis of phosphoromonothioate triesters 1 a,b exhibits a sizable thio effect, k(PO)/k(PS)=19. The effects of metal ions on the rate of the cleavage of diesters and triesters have been studied and discussed in terms of the suggested hydrogen-bond stabilization of the thiophosphorane intermediates derived from 1 a and 2 a.

Hydrolytic reactions of the phosphorodithioate analogue of uridylyl(3',5')uridine: kinetics and mechanisms for the cleavage, desulfurization, and isomerization of the internucleosidic linkage

The hydrolytic reactions of the phosphorodithioate analogue of uridylyl(3',5')uridine [3',5'-Up(s)2U] were followed by HPLC over a wide pH range at 363.2 K. Under acidic and neutral conditions, three reactions compete: (i) desulfurization to a mixture of the (Rp)- and (Sp)-diastereomers of the corresponding 3',5'- and 2',5'-phosphoromonothioates [3',5'- and 2',5'-Up(s)U], which are subsequently desulfurized to a mixture of uridylyl(3',5')- and -(2',5')uridine [3',5'- and 2',5'-UpU], (ii) isomerization to 2',5'-Up(s)2U, and (iii) cleavage to uridine, in all likelihood via a 2',3'-cyclic phosphorodithioate (2',3'-cUMPS2). Under alkaline conditions (pH > 8), only a hydroxide ion catalyzed hydrolysis to uridine via 2',3'-cUMPS2 takes place. At pH 3-7, all three reactions are pH-independent, the desulfurization being approximately 1 order of magnitude faster than the cleavage and isomerization. At pH < 3, all the reactions are hydronium ion catalyzed. On going to very acidic solutions, the cleavage gradually takes over the desulfurization and isomerization. Accordingly, the cleavage overwhelmingly predominates at pH < 0. The overall hydrolytic stability of 3',5'-Up(s)2U is comparable to that of (Sp)- and (Rp)-3',5'-Up(s)U (and to that of 3',5'-UpU, except at pH < 2). The rate of the hydroxide ion catalyzed hydrolysis of 3',5'-Up(s)2U is 37% and 53% of that of (Sp)- and (Rp)-3',5'-Up(s)U, respectively. The reactions, however, differ with the respect of the product accumulation. While the phosphoromonothioates produce a mixture of 2'- and 3'-thiophosphates as stable products, 3',5'-Up(s)2U is hydrolyzed to uridine without accumulation of the corresponding dithiophosphates. At pH < 3, where the hydrolysis is hydronium ion catalyzed, the kinetic thio-effect of the second thio substitution is small: under very acidic conditions (Ho -0.69), (Sp)-3',5'-Up(s)U reacts 1.6 times as fast as 3',5'-Up(s)2U, but the reactivity difference decreases on going to less acidic solutions. In summary, the hydrolytic stability of 3',5'-Up(s)2U closely resembles that of the corresponding phosphoromonothioate. While replacing one of the nonbridging phosphate oxygens of 3',5'-UpU with sulfur stabilizes the phosphodiester bond under acidic conditions by more than 1 order of magnitude, the replacement of the remaining nonbridging oxygen has only a minor influence on the overall hydrolytic stability.