Electrochemistry at Lipid Monolayer-Modified Liquid−Liquid Interfaces as an Improvement to Drug Partitioning Studies

Spectroelectrochemical Analysis of Ion Transfer Mechanisms of Mitoxantrone at Liquid|Liquid Interfaces: Effects of Zwitterionic Dendrimer and Phospholipid Layer

The ionic partition property and transfer mechanism of the anthraquinone antitumor agent mitoxantrone (MTX) were studied in detail at the water|1,2-dichloroethane (DCE) interface by means of surface-sensitive spectroelectrochemical techniques. The interfacial mechanism of the cationic MTX species was composed of potential-driven ion transfer and adsorption processes. The ion association between MTX and zwitterionic polyamidoamine (PAMAM) dendrimers with peripheral carboxy groups was also investigated in terms of the effects of pH and dendritic generation. The monovalent HMTX+ interacted effectively with the negatively charged dendrimers at neutral pH, while the divalent H2MTX2+ exhibited a weak association under acidic conditions. The higher stability of the dendrimer-MTX associates in the interfacial region was found for higher dendritic generations: G3.5 ≥ G2.5 > G1.5. The interfacial behavior of MTX and its dendrimer associates was further analyzed at the phospholipid-modified interface as a model biomembrane surface. The adsorption process of HMTX+ occurred mainly on the hydrophilic side of the phospholipid layer. The spectroelectrochemical results indicated that the dendrimers penetrate into the phospholipid layer and alter the transfer mechanism of HMTX+ across the interface.

Nitrazepam and 7-aminonitrazepam studied at the macroscopic and microscopic electrified liquid-liquid interface

Two benzodiazepine type drugs, that is, nitrazepam and 7-aminonitrazepam, were studied at the electrified liquid-liquid interface (eLLI). Both drugs are illicit and act sedative in the human body and moreover are used as date rape drugs. Existence of the diazepine ring in the concerned chemicals structure and one additional amine group (for 7-aminonitrazepam) allows for the molecular charging below their pKa values, and hence, both drugs can cross the eLLI interface upon application of the appropriate value of the Galvani potential difference. Chosen molecules were studied at the macroscopic eLLI formed in the four electrode cell and microscopic eLLI formed within a microtip defined as the single pore having 25 μm in diameter. Microscopic eLLI was formed using only a few μL of the organic and the aqueous phase with the help of a 3D printed cell. Parameters such as limit of detection and voltammetric detection sensitivity are derived from the experimental data. Developed methodology was used to detect nitrazepam in pharmaceutical formulation and both drugs (nitrazepam and 7-aminonitrazepam) in spiked biological fluids (urine and blood).

Electrochemical properties of phospholipid monolayers at liquid-liquid interfaces

Biomembrane models built at the interface between two immiscible electrolytes (ITIES) are useful systems to study phenomena of biological relevance by means of their electrochemical processes. The unique properties of ITIES allow one either to control or measure the potential difference across the biomimetic membranes. Herein we focus on phospholipid monolayers adsorbed at liquid-liquid interfaces, and besides discussing recent developments on the subject, we describe electrochemical techniques that can be used to get insight on the interfacial processes and electrostatic properties of phospholipid membranes at the ITIES. In particular, we examine the electrochemical and physicochemical properties of (modified) phospholipid monolayers and their interaction with other biologically relevant compounds. The use of liquid-liquid electrochemistry as a powerful tool to characterize drug properties is outlined. Although this review is not a survey of all the work in the field, it provides a comprehensive referencing to current research.

Kinetic modulation of pulsed chronopotentiometric polymeric membrane ion sensors by polyelectrolyte multilayers

Polymeric membrane ion-selective electrodes are normally interrogated by zero current potentiometry, and their selectivity is understood to be primarily dependent on an extraction/ion-exchange equilibrium between the aqueous sample and polymeric membrane. If concentration gradients in the contacting diffusion layers are insubstantial, the membrane response is thought to be rather independent of kinetic processes such as surface blocking effects. In this work, the surface of calcium-selective polymeric ion-selective electrodes is coated with polyelectrolyte multilayers as evidenced by zeta potential measurements, atomic force microscopy, and electrochemical impedance spectroscopy. Indeed, such multilayers have no effect on their potentiometric response if the membranes are formulated in a traditional manner, containing a lipophilic ion exchanger and a calcium-selective ionophore. However, drastic changes in the potential response are observed if the membranes are operated in a recently introduced kinetic mode using pulsed chronopotentiometry. The results suggest that the assembled nanostructured multilayers drastically alter the kinetics of ion transport to the sensing membrane, making use of the effect that polyelectrolyte multilayers have different permeabilities toward ions with different valences. The results have implications to the design of chemically selective ion sensors since surface-localized kinetic limitations can now be used as an additional dimension to tune the operational ion selectivity.

Effect of Gramicidin on Phospholipid-Modified Monolayers and on Ion Transfer at a Liquid–Liquid Interface

The interaction of hybrid lipid/gramicidin A (gA) monolayers with dextran sulfate (DS) and the effect of this interaction on ion transfer at a liquid-liquid interface is reported. The interfacial and physicochemical properties are studied with Langmuir-Blodgett (LB) and electrochemical techniques. The results obtained from compression isotherms demonstrate that the interactions between the different species in the hybrid monolayer vary according to the chemical nature of the lipid (hydrocarbon region and charge of the head group). Interfacial capacitance measured with AC voltammetry indicates that the DS chains form a rather flat and compact layer when adsorbed to either zwitterionic or negatively charged phospholipid monolayers, and that calcium, even at low concentrations, interacts with the monolayers. These results are successfully described by a model based on the solution of the Poisson-Boltzmann equation in the interfacial region. Ion transfer and interactions with the lipid/gA/DS-modified monolayers were also studied with electrochemical techniques. Admittance data show that although the studied ions are not using gA channels for the transfer through the lipid membranes, the incorporation of gA in the lipid domain and the adsorption of DS at the interface have a significant effect on ion transfer across the monolayers. This effect can be explained as a consequence of the modified surface charge and of the compactness of the lipid domain due to its interaction with gA and to calcium and DS adsorption at the interface. The ion-transfer rate, therefore, depends on the composition of the monolayer and the chemical nature of the ion.

Electrochemical Study of Interfacial Composite Nanostructures: Polyelectrolyte/Gold Nanoparticle Multilayers Assembled on Phospholipid/Dextran Sulfate Monolayers at a Liquid−Liquid Interface

The build up and electrochemical characterization of interfacial composite nanostructures containing a cationic polyelectrolyte and negatively charged mercaptosuccinic acid stabilized gold nanoparticles (AuNPs) is reported. The nanostructures were formed at the interface between two immiscible electrolyte solutions in which the organic phase is an immobilized 2-nitrophenyl octyl ether/PVC gel. The growth of the multilayer was verified with UV-vis spectra, and approximately a linear increase in UV-vis absorbance with increasing number of layers was observed. The interfacial capacitance of the multilayers was measured as a function of the potential and a theoretical model was developed to explain the results. The excellent agreement between theoretical and experimental capacitance curves allows us to conclude that nanocomposites behave similarly to polyelectrolyte multilayers, with the outmost layer determining the alternating sign of the outer surface charge density. Cyclic voltammograms were used to evaluate the transfer rate constant across the multilayers of a model drug, metoprolol, and the standard probe tetraethylammonium cation. The apparent rate constants were slightly larger than in other studies in the literature and decrease with the increasing number of layers.

Interfacial interaction between dextran sulfate and lipid monolayers: an electrochemical study

The interaction between dextran sulfate (DS) with zwitterionic dipalmitoylphosphatidylcholine (DPPC) and negatively charged dipalmitoylphosphatidic acid monolayers at different surface pressures at air-liquid and liquid-liquid interfaces was studied using Langmuir-Blodgett (LB) and electrochemical techniques. The negatively charged DS can bind to phospholipids via calcium ions. To investigate the mechanism of the adsorption of DS on lipid monolayers, compression isotherms (pi-A) and capacitance-potential curves were measured, and a theoretical model was developed to interpret the capacitance data. The compression of lipid monolayers in the presence of DS led to a more condensed hybrid layer, removing the LE-LC phase transition of DPPC. Lower surface pressures improved the binding of DS on the lipid monolayers via calcium bridges due to the electrostatic attraction. Alternating current voltammetry and cyclic voltammetry were used to monitor the transfer of a cationic beta-blocker (metoprolol) across lipid monolayers in the absence and presence of the polyelectrolyte and to compare with the transfer of the standard probe, tetraethylammonium cation. Results showed a strong dependence on (i) the surface pressure, (ii) the applied potential, and, (iii) in the case of the hybrid layer, the charge of the phospholipid headgroup. Finally, results were also confirmed by attenuated total reflection Fourier transform infrared spectroscopy, performed after transferring lipid multilayers onto a solid substrate by the LB method.

Drug permeation in biomembranes

In the past decades, it has become increasingly apparent that in addition to therapeutic effect, drugs need to exhibit favourable absorption, distribution, metabolism and excretion (ADME) characteristics to produce a desirable response in vivo. As the recent progress in drug discovery technology enables rapid synthesis of vast numbers of potential drug candidates, robust methods are required for the effective screening of compounds synthesized within such programs, so that compounds with poor pharmacokinetic properties can be rejected at an early stage of drug development. Furthermore, a viable in silico method would save resources by enabling virtual screening of drug candidates already prior to synthesis. This review gives a general overview of the approaches aimed at predicting biological permeation, one of the cornerstones behind the ADME behaviour of drugs. The most important experimental and computational models are reviewed. Physicochemical factors underlying the permeation process are discussed.