1
|
Adeel M, Asif K, Canzonieri V, Barai HR, Rahman MM, Daniele S, Rizzolio F. Controlled, partially exfoliated, self-supported functionalized flexible graphitic carbon foil for ultrasensitive detection of SARS-CoV-2 spike protein. SENSORS AND ACTUATORS. B, CHEMICAL 2022; 359:131591. [PMID: 35221530 PMCID: PMC8860393 DOI: 10.1016/j.snb.2022.131591] [Citation(s) in RCA: 15] [Impact Index Per Article: 7.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/15/2021] [Revised: 02/11/2022] [Accepted: 02/15/2022] [Indexed: 05/20/2023]
Abstract
This paper reports on an ultrasensitive and label-free electrochemical immunosensor for monitoring the SARS-CoV-2 spike protein (SARS-CoV-2 SP). A self-supported electrode, which can simultaneously serve as an antibody immobilization matrix and electron transport channel, was initially fabricated by a controlled partial exfoliation of a flexible graphitic carbon foil (GCF). Mild acidic treatment enabled the partial oxidation and exfoliation (down to a few layers) of the flexible GCF; this also provided a high percentage of oxygen functionality and an enhanced surface roughness. The substrate electrode was further functionalized with ethylenediamine (EDA) to provide a suitable platform with even a higher surface roughness, for the covalent immobilization of an anti-SARS-CoV-2 antibody. The change in the current response for the [Fe(CN)6]3-/4- redox couple, induced by the binding of SARS-CoV-2 SP to the antibody immobilized on the electrode surface, was used to determine the SARS-CoV-2 SP concentration. The immunosensor thus prepared could detect SARS-CoV-2 SP within 30 min with high reproducibility and specificity over a wide concentration range (0.2-100 ng/mL). Detection limits of 25 pg/mL and 27 pg/mL were found in a phosphate buffer solution (pH 7.4), and diluted blood plasma, respectively. The immunosensor was also employed to detect SARS-CoV-2 SP in artificial human saliva.
Collapse
Affiliation(s)
- Muhammad Adeel
- Department of Molecular Sciences and Nanosystems, Ca'Foscari University of Venice, 30123 Venezia, Italy
- Pathology Unit, Centro di Riferimento Oncologico di Aviano (CRO) IRCCS, 33081 Aviano, Italy
| | - Kanwal Asif
- Department of Molecular Sciences and Nanosystems, Ca'Foscari University of Venice, 30123 Venezia, Italy
- Pathology Unit, Centro di Riferimento Oncologico di Aviano (CRO) IRCCS, 33081 Aviano, Italy
| | - Vincenzo Canzonieri
- Pathology Unit, Centro di Riferimento Oncologico di Aviano (CRO) IRCCS, 33081 Aviano, Italy
- Department of Medical, Surgical and Health Sciences, University of Trieste, 34127 Trieste, Italy
| | - Hasi Rani Barai
- Department of Mechanical Engineering, Yeungnam University, Gyeongsan 38541, South Korea
| | - Md Mahbubur Rahman
- Department of Applied Chemistry, Konkuk University, Chungju 27478, South Korea
| | - Salvatore Daniele
- Department of Molecular Sciences and Nanosystems, Ca'Foscari University of Venice, 30123 Venezia, Italy
| | - Flavio Rizzolio
- Department of Molecular Sciences and Nanosystems, Ca'Foscari University of Venice, 30123 Venezia, Italy
- Pathology Unit, Centro di Riferimento Oncologico di Aviano (CRO) IRCCS, 33081 Aviano, Italy
| |
Collapse
|
2
|
Guo SX, Unwin PR, Whitworth AL, Zhang J. Microelectrochemical Techniques for Probing Kinetics at Liquid/Liquid Interfaces. PROGRESS IN REACTION KINETICS AND MECHANISM 2019. [DOI: 10.3184/0079674044037441] [Citation(s) in RCA: 12] [Impact Index Per Article: 2.4] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/17/2022]
Abstract
We provide an overview of recent advances in microelectrochemical approaches to investigate the kinetics of various physicochemical processes that occur at the interface between two immiscible electrolyte solutions (ITIES). To place the advances in context, background material on the structure of the ITIES, derived from both experimental studies and computer simulation, is also provided. The main focus of the article is micro-ITIES techniques, single droplet measurements, microelectrochemical measurements at expanding droplets (MEMED) and scanning electrochemical microscopy (SECM). Recent developments in a combined SECM-Langmuir trough technique for probing diffusion processes across Langmuir monolayers at the water/air (W/A) interface are also highlighted, by considering an organic monolayer at a water surface as a special case of a liquid/liquid interface.
Collapse
Affiliation(s)
- Si-Xuan Guo
- Department of Chemistry, University of Warwick, Coventry CV4 7AL, UK
| | - Patrick R. Unwin
- Department of Chemistry, University of Warwick, Coventry CV4 7AL, UK
| | - Anna L. Whitworth
- Department of Chemistry, University of Warwick, Coventry CV4 7AL, UK
| | - Jie Zhang
- Department of Chemistry, University of Warwick, Coventry CV4 7AL, UK
| |
Collapse
|
3
|
Strutwolf J, Zhang J, Unwin PR. Investigation of Molecular Transfer Processes across Phospholipid Monolayers by the Combined Scanning Electrochemical Microscopy-Langmuir Trough Technique. PROGRESS IN REACTION KINETICS AND MECHANISM 2019. [DOI: 10.3184/1468607x247749] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.2] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/17/2022]
Abstract
Scanning electrochemical microscopy (SECM) has emerged as a powerful techniquefor inducing and monitoring molecular transfer processes across water/air and liquid/liquid interfaces. At the same time, the Langmuir trough technique is a well established method for controlling the lateral pressure of molecular films of amphiphilic molecules at interfaces. A combination of both methods allows the investigation of the permeability of monolayers in a defined state. A brief introduction of the SECM technique and the experimental set-up is presented. The application of the combined SECM- Langmuir trough technique to measure passive diffusion of small molecules (O2 and Br2) across phospholipid monolayers is then reviewed. Phospholipid monolayers at liquid/liquid and liquid/air interfaces serve as simple biomimetic models for biomembranes and the results of the combined SECM- Langmuir trough measurements have implications for understanding passive diffusion across cellular membranes.
Collapse
Affiliation(s)
- Jörg Strutwolf
- Tyndall National Institute, Lee Maltings, University College Cork, Cork, Ireland and University of Tübingen, Department of Chemistry, Institute of Organic Chemistry, Auf der Morgenstelle 18, 72076 Tübingen, Germany
| | - Jie Zhang
- Institute of Bioengineering and Nanotechnology, 31 Biopolis Way, The Nanos, #04-01, Singapore 138669
| | - Patrick R. Unwin
- Department of Chemistry, University of Warwick, Coventry CV4 7AL, UK
| |
Collapse
|
4
|
Sklodowska K, Jakiela S. Enhancement of bacterial growth with the help of immiscible oxygenated oils. RSC Adv 2017. [DOI: 10.1039/c7ra07095k] [Citation(s) in RCA: 17] [Impact Index Per Article: 2.4] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022] Open
Abstract
Bacterial growth in an aqueous medium in the vicinity of the interface with an immiscible oxygenated fluid is a subject of this study. We tested six oxygenated liquids, including hexadecane, silicone oil, FC-40, FC-70, HFE-7200 and HFE-7500.
Collapse
Affiliation(s)
| | - Slawomir Jakiela
- Warsaw University of Life Sciences
- Department of Biophysics
- Warsaw
- Poland
| |
Collapse
|
5
|
Miller TS, Macpherson JV, Unwin PR. Electrochemical activation of pristine single walled carbon nanotubes: impact on oxygen reduction and other surface sensitive redox processes. Phys Chem Chem Phys 2015; 16:9966-73. [PMID: 24472842 DOI: 10.1039/c3cp53717j] [Citation(s) in RCA: 8] [Impact Index Per Article: 0.9] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/02/2023]
Abstract
The effect of systematic anodic pre-treatments of pristine single walled carbon nanotube (SWNT) forests on the electrochemical response towards a variety of redox processes is investigated. An experimental arrangement is adopted whereby a microcapillary containing the solution of interest and a quasi reference-counter electrode is brought into contact with a small portion of the forest to enable measurements on the surface before and after controlled anodic polarisation (AP). AP of the surface is found to both improve the voltammetric response (faster apparent heterogeneous electron transfer kinetics) of surface sensitive redox processes, such as Fe(2+/3+), and enhance the electrocatalytic response of the SWNTs towards oxygen reduction; the extent of which can be carefully controlled via the applied anodic potential. AP is expected to remove any trace organic (atmospheric) contaminants that may accumulate on the forest over extended periods as well as allowing the controlled introduction of defects, as confirmed by micro-Raman spectroscopy.
Collapse
Affiliation(s)
- Thomas S Miller
- Department of Chemistry, University of Warwick, Coventry, CV4 7AL, UK.
| | | | | |
Collapse
|
6
|
Toikkanen O, Lähteenmäki M, Moisio T, Forssell P, Partanen R, Murtomäki L. Study of oxygen transfer across milk proteins at an air-water interface with scanning electrochemical microscopy. JOURNAL OF AGRICULTURAL AND FOOD CHEMISTRY 2014; 62:2284-2288. [PMID: 24559153 DOI: 10.1021/jf5008715] [Citation(s) in RCA: 12] [Impact Index Per Article: 1.2] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/03/2023]
Abstract
Scanning electrochemical microscopy (SECM) combined with a Langmuir trough was used for studying oxygen transfer across protein films at an air-water interface. The method allows the comparison of the oxygen permeability of different emulsifiers without any concerns of interference of atmospheric oxygen. Two milk proteins, β-lactoglobulin and β-casein, were compared, and the permeabilities obtained were for β-casein PD ≈ 2.2 × 10(-7) cm(2)/s and for β-lactoglobulin PD ≈ 0.6 × 10(-7) cm(2)/s, which correspond to the lowest limit of the diffusion coefficients and are 2 orders of magnitude lower than the diffusion coefficient of oxygen in water, yet several orders of magnitude higher than previously reported for milk protein films. The method allows characterization of the oxygen barrier properties of liquid interfacial films, which is of crucial importance for understanding the role of the interface in the inhibition of oxygen transport and developing modified interfaces with higher oxygen blocking efficacy.
Collapse
Affiliation(s)
- Outi Toikkanen
- VTT Technical Research Centre of Finland, P.O. Box 1000, FI-02044 VTT, Finland
| | | | | | | | | | | |
Collapse
|
7
|
|
8
|
Momotenko D, Cortes-Salazar F, Lesch A, Wittstock G, Girault HH. Microfluidic push-pull probe for scanning electrochemical microscopy. Anal Chem 2011; 83:5275-82. [PMID: 21563749 DOI: 10.1021/ac2006729] [Citation(s) in RCA: 54] [Impact Index Per Article: 4.2] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/28/2022]
Abstract
This paper presents a microfluidic push-pull probe for scanning electrochemical microscopy (SECM) consisting of a working microelectrode, an integrated counter/reference electrode and two microchannels for pushing and pulling an electrolyte solution to and away from a substrate. With such a configuration, a droplet of a permanently renewed redox mediator solution is maintained just at the probe tip to carry out SECM measurements on initially dry substrates or in microenvironments. For SECM imaging purposes, the probe fabricated in a soft polymer material is used in a contact regime. SECM images of various gold-on-glass samples demonstrate the proof-of-concept of a push-pull probe for local surface activity characterization with high spatial resolution even on vertically oriented substrates. Finite element computations were performed to guide the improvement of the probe sensitivity.
Collapse
Affiliation(s)
- Dmitry Momotenko
- Laboratoire d'Electrochimie Physique et Analytique, Ecole Polytechnique Fédérale de Lausanne, Station 6, CH-1015 Lausanne, Switzerland
| | | | | | | | | |
Collapse
|
9
|
Edwards MA, Whitworth AL, Unwin PR. Quantitative Analysis and Application of Tip Position Modulation-Scanning Electrochemical Microscopy. Anal Chem 2011; 83:1977-84. [DOI: 10.1021/ac102680v] [Citation(s) in RCA: 23] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/29/2022]
Affiliation(s)
- Martin A. Edwards
- Department of Chemistry, University of Warwick, Gibbet Hill Road, Coventry, CV4 7AL, U.K
- Molecular Organisation and Assembly in Cells Doctoral Training Centre, University of Warwick, Gibbet Hill Road, Coventry, CV4 7AL, U.K
| | - Anna L. Whitworth
- Department of Chemistry, University of Warwick, Gibbet Hill Road, Coventry, CV4 7AL, U.K
| | - Patrick R. Unwin
- Department of Chemistry, University of Warwick, Gibbet Hill Road, Coventry, CV4 7AL, U.K
| |
Collapse
|
10
|
Pust SE, Maier W, Wittstock G. Investigation of Localized Catalytic and Electrocatalytic Processes and Corrosion Reactions with Scanning Electrochemical Microscopy (SECM). ACTA ACUST UNITED AC 2009. [DOI: 10.1524/zpch.2008.5426] [Citation(s) in RCA: 53] [Impact Index Per Article: 3.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/24/2022]
Abstract
AbstractScanning electrochemical microscopy (SECM) has developed into a very versatile tool for the investigation of solid-liquid, liquid-liquid and liquid-gas interfaces. The arrangement of an ultramicroelectrode (UME) in close proximity to the interface under study allows the application of a large variety of different experimental schemes. The most important have been named feedback mode, generation-collection mode, redox competition mode and direct mode. Quantitative descriptions are available for the UME signal, depending on different sample properties and experimental variables. Therefore, SECM has been established as an indispensible tool in many areas of fundamental electrochemical research. Currently, it also spreads as an important new method to solve more applied problems, in which inhomogeneous current distributions are typically observed on different length scales. Prominent examples include devices for electrochemical energy conversion such as fuel cells and batteries as well as localized corrosion phenomena. However, the direct local investigation of such systems is often impossible. Instead, suitable reaction schemes, sample environments, model samples and even new operation modes have to be introduced in order to obtain results that are relevant to the practical application. This review outlines and compares the theoretical basis of the different SECM working modes and reviews the application in the area of electrochemical energy conversion and localized corrosion with a special emphasis on the problems encountered when working with practical samples.
Collapse
|
11
|
Edwards MA, Williams CG, Whitworth AL, Unwin PR. Scanning ion conductance microscopy: a model for experimentally realistic conditions and image interpretation. Anal Chem 2009; 81:4482-92. [PMID: 19405486 DOI: 10.1021/ac900376w] [Citation(s) in RCA: 74] [Impact Index Per Article: 4.9] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/29/2022]
Abstract
Scanning ion conductance microscopy (SICM) is a scanned probe microscopy technique in which the probe is a fine glass pipet filled with a contact (reference) electrode and an electrolyte solution. The current flow between the reference electrode and a second reference electrode positioned in bulk solution when the two electrodes are biased externally can be used as a feedback signal to maintain a constant separation between the tip and a surface during imaging. In usual practice the tip position is modulated over a small amplitude perpendicular to the surface, and the resulting alternating current (AC) is used as the feedback signal, although the direct current can also be used. A comprehensive model for the current response is reported. Laplace's equation has been solved for the electrolyte solution for a range of tip geometries, enabling the factors controlling the tip current to be identified. The approach developed is shown to represent an improvement over earlier semiempirical treatments. To explore the influence of surface topography on the (AC) current response, various surfaces have been considered, including a tip moved toward a planar surface (in the normal direction) and tips scanned over a pit and a step in the surface. The results have allowed a critical assessment of the SICM response as a means of probing surface topography. Features identified through simulation have been found in experiments through studies of two model substrates for which imaging results are reported. In typical experimental practice, the response of the SICM tip to surface features occurs over much greater lateral distances than the size of the pipet aperture.
Collapse
Affiliation(s)
- Martin A Edwards
- Department of Chemistry, University of Warwick, Coventry CV4 7AL, UK
| | | | | | | |
Collapse
|
12
|
Sarkar K, Katiyar A, Jain P. Growth and dissolution of an encapsulated contrast microbubble: effects of encapsulation permeability. ULTRASOUND IN MEDICINE & BIOLOGY 2009; 35:1385-96. [PMID: 19616160 PMCID: PMC2713870 DOI: 10.1016/j.ultrasmedbio.2009.04.010] [Citation(s) in RCA: 112] [Impact Index Per Article: 7.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/04/2008] [Revised: 04/01/2009] [Accepted: 04/16/2009] [Indexed: 05/03/2023]
Abstract
Gas diffusion from an encapsulated microbubble is modeled using an explicit linear relation for gas permeation through the encapsulation. Both the cases of single gas (air) and multiple gases (perfluorocarbon inside the bubble and air dissolved in surrounding liquid) are considered. An analytical expression for the dissolution time for an encapsulated air bubble is obtained; it showed that for small permeability the dissolution time increases linearly with decreasing permeability. A perfluorocarbon-filled contrast microbubble such as Definity was predicted to experience a transient growth because of air infusion before it dissolves in conformity with previous experimental findings. The growth phase occurs only for bubbles with a critical value of initial mole fraction of perfluorocarbon relative to air. With empirically obtained property values, the dissolution time of a 2.5-micron diameter (same as that of Definity), lipid-coated octafluoropropane bubble, with surface tension 25 mN/m, is predicted to be 42 min in an air-saturated medium. The properties such as shell permeability, surface tension and relative mole fraction of octafluoropropane are varied to investigate their effects on the time scales of bubble growth and dissolution, including their asymptotic scalings where appropriate. The dissolution dynamics scales with permeability, in that when the time is nondimensioanlized with permeability, curves for different permeabilities collapse on a single curve. Investigation of bubbles filled with other gases (nonoctafluoropropane perfluorocarbon and sulfur hexafluoride) indicates longer dissolution time because of lower solubility and lower diffusivity for larger gas molecules. For such micron-size encapsulated bubbles, lifetime of hours is possible only at extremely low surface tension (<1 mN/m) or at extreme oversaturation.
Collapse
Affiliation(s)
- Kausik Sarkar
- Department of Mechanical Engineering, University of Delaware, Newark, DE 19716, USA.
| | | | | |
Collapse
|
13
|
Salter I, Zubkov MV, Warwick PE, Burkill PH. Marine bacterioplankton can increase evaporation and gas transfer bymetabolizing insoluble surfactants from the air-seawater interface. FEMS Microbiol Lett 2009; 294:225-31. [PMID: 19431239 DOI: 10.1111/j.1574-6968.2009.01572.x] [Citation(s) in RCA: 6] [Impact Index Per Article: 0.4] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/30/2022] Open
Abstract
Hydrophobic surfactants at the air-sea interface can retard evaporative and gaseous exchange between the atmosphere and the ocean.While numerous studies have examined the metabolic role of bacterioneuston at the air-sea interface, the interactions between hydrophobic surfactants and bacterioplankton are not well constrained. A novel experimental design was developed, using Vibrio natriegens and (3)H-labelled hexadecanoic acid tracer, to determine how the bacterial metabolism of fatty acids affects evaporative fluxes. In abiotic systems, >92% of the added hexadecanoic acid remained at the air-water interface. In contrast, the presence of V. natriegens cells draws down insoluble hexadecanoic acid from the air-water interface as an exponential function of time. The exponents characterizing the removal of hexadecanoic acid from the interface co-vary with the concentration of V. natriegens cells in the underlying water, with the largest exponent corresponding to the highest cell abundance. Radiochemical budgets show that evaporative fluxes from the system are linearly proportional to the quantity of hexadecanoic acid at the interface. Thus, bacterioplankton could influence the rate of evaporation and gas transfer in the ocean through the metabolism of otherwise insoluble surfactants.
Collapse
|
14
|
WILLIAMS CG, MACPHERSON JV, UNWIN PR, PARKINSON C. Laser Scanning Confocal Microscopy Coupled with Hydraulic Permeability Measurements for Elucidating Fluid Flow across Porous Materials: Application to Human Dentine. ANAL SCI 2008; 24:437-42. [DOI: 10.2116/analsci.24.437] [Citation(s) in RCA: 7] [Impact Index Per Article: 0.4] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/23/2022]
|
15
|
Ferrara K, Pollard R, Borden M. Ultrasound microbubble contrast agents: fundamentals and application to gene and drug delivery. Annu Rev Biomed Eng 2007; 9:415-47. [PMID: 17651012 DOI: 10.1146/annurev.bioeng.8.061505.095852] [Citation(s) in RCA: 771] [Impact Index Per Article: 45.4] [Reference Citation Analysis] [Abstract] [MESH Headings] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/09/2022]
Abstract
This review offers a critical analysis of the state of the art of medical microbubbles and their application in therapeutic delivery and monitoring. When driven by an ultrasonic pulse, these small gas bubbles oscillate with a wall velocity on the order of tens to hundreds of meters per second and can be deflected to a vessel wall or fragmented into particles on the order of nanometers. While single-session molecular imaging of multiple targets is difficult with affinity-based strategies employed in some other imaging modalities, microbubble fragmentation facilitates such studies. Similarly, a focused ultrasound beam can be used to disrupt delivery vehicles and blood vessel walls, offering the opportunity to locally deliver a drug or gene. Clinical translation of these vehicles will require that current challenges be overcome, where these challenges include rapid clearance and low payload. The technology, early successes with drug and gene delivery, and potential clinical applications are reviewed.
Collapse
Affiliation(s)
- Katherine Ferrara
- Department of Biomedical Engineering, University of California, Davis, California 95616-8686, USA.
| | | | | |
Collapse
|
16
|
Wittstock G, Burchardt M, Pust SE, Shen Y, Zhao C. Scanning electrochemical microscopy for direct imaging of reaction rates. Angew Chem Int Ed Engl 2007; 46:1584-617. [PMID: 17285666 DOI: 10.1002/anie.200602750] [Citation(s) in RCA: 313] [Impact Index Per Article: 18.4] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/07/2022]
Abstract
Not only in electrochemistry but also in biology and in membrane transport, localized processes at solid-liquid or liquid-liquid interfaces play an important role at defect sites, pores, or individual cells, but are difficult to characterize by integral investigation. Scanning electrochemical microscopy is suitable for such investigations. After two decades of development, this method is based on a solid theoretical foundation and a large number of demonstrated applications. It offers the possibility of directly imaging heterogeneous reaction rates and locally modifying substrates by electrochemically generated reagents. The applications range from classical electrochemical problems, such as the investigation of localized corrosion and electrocatalytic reactions in fuel cells, sensor surfaces, biochips, and microstructured analysis systems, to mass transport through synthetic membranes, skin and tissue, as well as intercellular communication processes. Moreover, processes can be studied that occur at liquid surfaces and liquid-liquid interfaces.
Collapse
Affiliation(s)
- Gunther Wittstock
- Carl von Ossietzky Universität Oldenburg, Institut für Reine und Angewandte Chemie und Institut für Chemie und Biologie des Meeres, 26111 Oldenburg, Germany.
| | | | | | | | | |
Collapse
|
17
|
Wittstock G, Burchardt M, Pust S, Shen Y, Zhao C. Elektrochemische Rastermikroskopie zur direkten Abbildung von Reaktionsgeschwindigkeiten. Angew Chem Int Ed Engl 2007. [DOI: 10.1002/ange.200602750] [Citation(s) in RCA: 47] [Impact Index Per Article: 2.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/06/2022]
|
18
|
Lindsey G, Abercrombie S, Denuault G, Daniele S, De Faveri E. Scanning Electrochemical Microscopy: Approach Curves for Sphere-Cap Scanning Electrochemical Microscopy Tips. Anal Chem 2007; 79:2952-6. [PMID: 17313182 DOI: 10.1021/ac061427c] [Citation(s) in RCA: 27] [Impact Index Per Article: 1.6] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/29/2022]
Abstract
The parameters of functions used to predict diffusion-controlled scanning electrochemical microscopy approach curves under positive and negative (hindered diffusion) feedback for sphere-cap tips are reported. These functions were obtained by fitting approach curves simulated with an error-bounded adaptive finite element algorithm. Several geometries corresponding to different sphere-cap dimensions were considered including the effect of the tip insulating sheath. The simulated approach curves were successfully compared with experimental ones obtained with mercury sphere caps electrodeposited onto platinum microdisk electrodes.
Collapse
Affiliation(s)
- Georgina Lindsey
- School of Chemistry, University of Southampton, Highfield, Southampton SO17 1BJ, United Kingdom
| | | | | | | | | |
Collapse
|
19
|
Nagy G, Nagy L. Electrochemical Sensors Developed for Gathering Microscale Chemical Information. ANAL LETT 2007. [DOI: 10.1080/00032710600867226] [Citation(s) in RCA: 12] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/23/2022]
|
20
|
Zuo YY, Acosta E, Cox PN, Li D, Neumann AW. Effect of compressed bovine lipid extract surfactant films on oxygen transfer. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2007; 23:1339-46. [PMID: 17241056 DOI: 10.1021/la061608+] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.1] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/13/2023]
Abstract
In the lungs, oxygen transfer from the inspired air to the capillary blood needs to cross the surfactant lining layer of the alveoli. Therefore, the gas transfer characteristics of lung surfactant film are of fundamental physiological interest. However, previous in vitro studies-most relied on the Langmuir-type balance-fail to cover the low surface tension range (i.e., less than the equilibrium surface tension of approximately 25 mJ/m2) due to film leakage. We have recently developed a novel in vitro experimental strategy, the combination of axisymmetric drop shape analysis and captive bubble technique (ADSA-CB), in studying the effect of surfactant films on interfacial gas transfer (Langmuir 2005, 21, 5446). In the present work, ADSA-CB is used as a micro-film-balance to study the effect of compressed bovine lipid extract surfactant (BLES) films on oxygen transfer. A low surface tension ranging from approximately 25 mJ/m2 to 2 mJ/m2 is studied. The experimental results suggest that lung surfactant films at a low surface tension near 2 mJ/m2 provide resistance to oxygen transfer, as indicated by a decrease of 30-50% in the mass transfer coefficient (kL) of oxygen in BLES suspensions with respect to water. At higher surface tension (i.e., >6 mJ/m2), the resistance to oxygen transfer is only modest, i.e., the decrease in kL is less than 20% compared to water. The experimental results suggest that lung surfactant plays a role in oxygen transfer in the pulmonary system.
Collapse
Affiliation(s)
- Yi Y Zuo
- Department of Mechanical and Industrial Engineering, University of Toronto, 5 King's College Road, Toronto, Ontario M5S 3G8, Canada
| | | | | | | | | |
Collapse
|
21
|
Bertoncello P, Ciani I, Li F, Unwin PR. Measurement of apparent diffusion coefficients within ultrathin nafion Langmuir-Schaefer films: comparison of a novel scanning electrochemical microscopy approach with cyclic voltammetry. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2006; 22:10380-8. [PMID: 17129006 DOI: 10.1021/la061214i] [Citation(s) in RCA: 34] [Impact Index Per Article: 1.9] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/12/2023]
Abstract
The use of scanning electrochemical microscopy (SECM) to evaluate the apparent diffusion coefficient, Dapp, of redox-active species in ultrathin Nafion films is described. In this technique, an ultramicroelectrode (UME) tip, positioned close to a film on a macroscopic electrode, is used to oxidize (or reduce) a species in bulk solution, causing the tip-generated oxidant (reductant) to diffuse to the film/solution interface. The oxidation (reduction) of film-confined species regenerates the reductant (oxidant) in solution, leading to feedback to the UME. A numerical model is developed that allows Dapp to be determined. For these studies, ultrathin films of Nafion were prepared using the Langmuir-Schaefer (LS) technique and loaded with an electroactive species, either the ferrocene derivative ferrocenyltrimethylammonium cation, FA+, or tris(2,2'-bipyridyl)ruthenium(II), Ru(bpy)32+. The morphology and the thickness of the Nafion LS films (1.5 +/- 0.2 nm per layer deposited) were evaluated using atomic force microscopy (AFM). For comparison with the SECM measurements, cyclic voltammetry (CV) was employed to evaluate the concentration of electroactive species within the Nafion LS films and to determine Dapp. The latter was found to be essentially invariant with film thickness, but the value for Ru(bpy)32+ was 1 order of magnitude larger than for FA+. CV and SECM measurements yield different values of Dapp, and the underlying reasons are discussed. In general, the Dapp values for these films are considerably smaller than for recast Nafion films, which can be attributed to the compactness of Nafion LS films. Nonetheless, the ultrathin nature of the films leads to fast response times, and we thus expect that these modified electrodes could find applications in sensing, electroanalysis, and electrocatalysis.
Collapse
Affiliation(s)
- Paolo Bertoncello
- Department of Chemistry, University of Warwick, Coventry CV4 7AL, United Kingdom.
| | | | | | | |
Collapse
|
22
|
Edwards MA, Martin S, Whitworth AL, Macpherson JV, Unwin PR. Scanning electrochemical microscopy: principles and applications to biophysical systems. Physiol Meas 2006; 27:R63-108. [PMID: 17135697 DOI: 10.1088/0967-3334/27/12/r01] [Citation(s) in RCA: 95] [Impact Index Per Article: 5.3] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/12/2022]
Abstract
This review highlights numerous and wide ranging biophysical and biochemical applications of scanning electrochemical microscopy (SECM). SECM instrumentation and theoretical modelling, necessary for experimental interpretation, are outlined, followed by a detailed discussion of the diverse applications of this technique. These include the measurement of flow through membranes, the determination of kinetic parameters of reactions, the investigation of the permeability of small molecules in tissues and monitoring biological processes, such as the production of oxygen or nitric oxide by cells. The significant impact of micro-electrochemical techniques on our understanding of basic physicochemical processes at biologically relevant interfaces is also considered. Studies reviewed include transport across and within bilayers and monolayers. Recent advances in SECM include the combination of SECM with other techniques, such as atomic force microscopy and optical microscopy. These developments are highlighted, along with prospects for the future.
Collapse
Affiliation(s)
- Martin A Edwards
- Department of Chemistry, University of Warwick, Coventry CV4 7AL, UK
| | | | | | | | | |
Collapse
|
23
|
Donaldson DJ, Vaida V. The Influence of Organic Films at the Air−Aqueous Boundary on Atmospheric Processes. Chem Rev 2006; 106:1445-61. [PMID: 16608186 DOI: 10.1021/cr040367c] [Citation(s) in RCA: 210] [Impact Index Per Article: 11.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/29/2022]
Affiliation(s)
- D J Donaldson
- Department of Chemistry, University of Toronto, Toronto, Ontario M5S 3H6, Canada.
| | | |
Collapse
|
24
|
Pu G, Longo ML, Borden MA. Effect of microstructure on molecular oxygen permeation through condensed phospholipid monolayers. J Am Chem Soc 2005; 127:6524-5. [PMID: 15869260 DOI: 10.1021/ja051103q] [Citation(s) in RCA: 49] [Impact Index Per Article: 2.6] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/30/2022]
Abstract
A method is presented that allows novel measurement of the effect of microstructure on the oxygen permeability of highly condensed, polycrystalline phospholipid monolayers. Oxygen permeability of the polycrystalline shell coating a stationary microbubble is measured directly using an apposing microelectrode in the induced transfer mode and modeling oxygen flux through the shell and intervening aqueous medium. Varying cooling rate through the phospholipid main phase transition permits control of shell microstructure by manipulation of crystalline domain size and shape. Domain boundary density, defined as the ratio of the mean domain perimeter to the mean domain area, of the microbubble shell is determined by fluorescence microscopy. Oxygen permeability was shown to increase linearly with domain boundary density at a constant phospholipid acyl chain length and, accordingly, was shown to decrease exponentially with increasing chain length at a constant domain boundary density. Modification of the energy barrier theory to account for microstructural effects, in terms of the domain boundary density, provides a general equation to model passive transport through polycrystalline monolayer films. Results from this method show promise in determining the gas transport kinetics of medical microbubbles and the gas exchange characteristics of biological monolayers.
Collapse
Affiliation(s)
- Gang Pu
- Department of Chemical Engineering & Materials Science and Department of Biomedical Engineering, University of California-Davis, Davis, CA 95616, USA
| | | | | |
Collapse
|
25
|
Fernández JL, Hurth C, Bard AJ. Scanning Electrochemical Microscopy #54. Application To The Study Of Heterogeneous Catalytic ReactionsHydrogen Peroxide Decomposition. J Phys Chem B 2005; 109:9532-9. [PMID: 16852147 DOI: 10.1021/jp050340c] [Citation(s) in RCA: 23] [Impact Index Per Article: 1.2] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/28/2022]
Abstract
A scanning electrochemical microscopy (SECM) approach for the analysis of heterogeneous catalytic reactions at solid-liquid interfaces is described and applied. In this scheme, reactant, generated at a tip, undergoes a reaction (e.g., disproportionation) at the substrate. The theoretical background for this study, performed by digital simulations using a finite difference method, considers a chemical reaction at the substrate with general stoichiometry. In this case, the fraction of regenerated mediator (nu(S)) may differ with respect to a substrate reaction that is the reverse of the tip reaction, resulting in an asymmetric mediator loop. Simulated tip current transients and approach curves at different values of the kinetic rate constant for reactions where nu(S) < 1 were used to analyze this new SECM situation. This approach was used to study the catalytic decomposition of hydrogen peroxide (HO2- --> 1/2O2 + OH-), where nu(S) = 0.5, on supported catalysts. A gold-mercury amalgam tip was used to quantitatively reduce dissolved O2 (mediator) to HO2-, which was decomposed back to oxygen at the catalyst substrate. Rate constants for the decomposition reaction on immobilized catalase and Pt particles were measured at different pH values by the correlation of experimental approach curves with the theoretical dependencies.
Collapse
Affiliation(s)
- José L Fernández
- Department of Chemistry and Biochemistry, Center for Nano and Molecular Science and Technology, The University of Texas at Austin, Austin, Texas 78712, USA
| | | | | |
Collapse
|
26
|
Burt DP, Cervera J, Mandler D, Macpherson JV, Manzanares JA, Unwin PR. Scanning electrochemical microscopy as a probe of Ag+ binding kinetics at Langmuir phospholipid monolayers. Phys Chem Chem Phys 2005; 7:2955-64. [PMID: 16189617 DOI: 10.1039/b506611e] [Citation(s) in RCA: 14] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
A new method has been developed for measuring local adsorption rates of metal ions at interfaces based on scanning electrochemical microscopy (SECM). The technique is illustrated with the example of Ag+ binding at Langmuir phospholipid monolayers formed at the water/air interface. Specifically, an inverted 25 microm diameter silver disc ultramicroelectrode (UME) was positioned in the subphase of a Langmuir trough, close to a dipalmitoyl phosphatidic acid (DPPA) monolayer, and used to generate Ag+ via Ag electro-oxidation. The method involved measuring the transient current-time response at the UME when the electrode was switched to a potential to electrogenerate Ag+. Since the Ag+/Ag couple is reversible, the response is highly sensitive to local mass transfer of Ag+ away from the electrode, which, in turn, is governed by the interaction of Ag+ with the monolayer. The methodology has been used to determine the influence of surface pressure on the adsorption of Ag+ ions at a phospholipid (dipalmitoyl phosphatidic acid) Langmuir monolayer. It is shown that the capacity for metal ion adsorption at the monolayer increased as the density of surface adsorption sites increased (by increasing the surface pressure). A model for mass transport and adsorption in this geometry has been developed to explain and characterise the adsorption process.
Collapse
Affiliation(s)
- David P Burt
- Department of Chemistry, University of Warwick, Coventry, UK
| | | | | | | | | | | |
Collapse
|